increase productivity reduce scrap superior value …increase productivity ... standard ports are...
TRANSCRIPT
www.phdinc.com1-800-624-8511
www.phdinc.com1-800-624-8511
CLASSIC06
CLASSIC PRODUCTScatalog 2006
cylinders
rotary actuators
powered slides
grippers
accessories
increase productivity • Reduce downtime • Reduce scrap • SUPERIOR VALUE
2
www.phdinc.com/products/classic • (800) 624-8511
CLASSIC06
The products listed in this catalog are for replacement ofexisting products out in the field. For new applications, pleaserefer to the products in PHD’s main catalog.
CAT-06
When applicable, we have recommended newer productsto replace our classic products. This is an example:
© Copyright 2006, by PHD, Inc. All Rights Reserved. Printed in the U.S.A.
CLASSIC PRODUCT & SERIES PAGE NO.
CYLINDERS
O Compact ............................................................... 5 - 9
AS, AVS, HVS Spherical Mount ............................ 10 - 13
EA, EH, EL, ES Heavy Duty ................................... 14 - 17
1-1/8, 1-3/8 NEAG, NEHG Heavy DutyNon-Rotating ........................................................ 18 - 20
ROTARY ACTUATORS0180 ..................................................................... 21 - 25
SLIDES
N .......................................................................... 27 - 29
T & TS08 .............................................................. 31 - 35
R .......................................................................... 36 - 42
C ........................................................................... 43 - 45
B ........................................................................... 47 - 51
M .......................................................................... 52 - 56
SGxM ................................................................... 57 - 60
GRIPPERS
8600 Parallel ........................................................ 62 - 64
7900 Parallel ........................................................ 65 - 67
8600 Angular ........................................................ 69 - 71
7900 Angular 2 & 3 Jaw ....................................... 73 - 77
190 Angular .......................................................... 78 - 80
ACCESSORIES
Tandem Oil ............................................................. 81-82
Air/Oil Tank Reservoir ........................................... 83- 84
INDEX
SERIES 7900 ANGULAR
For new applicationswe recommend
Series GRB & 5300 Grippers.See PHD’s main catalog.
This catalog does not include all productinformation for these products. Additionalinformation (benefits, engineering data,options, etc.) may be viewed at PHD's web site:
www.phdinc.com/products/classic
CLASSIC PRODUCTS
3
www.phdinc.com/products/classic • (800) 624-8511
CLAS
SIC0
6
��������������
�� �����������
��������
���������
Series NSeries T &TS08
Series RSeries CSeries BSeries M
Series SGxM
Series O CompactSeries AS, AVS, HVS Spherical Mount
Series ESeries NE Heavy Duty Non-Rotating
Series 0180 Miniature
���� ���
Series 8600 ParallelSeries 7900 ParallelSeries 8600 Angular
Series 7900 Angular 2 & 3 jawsSeries 190 Angular
��������� Tandem OilAir/Oil Tank & Reservoir
4255
51255
4 5
4 5
5 10
�������� �����
�����������������
5564644
5535355
4
www.phdinc.com/products/classic • (800) 624-8511
CLASSIC06
BENEFITS■ The compact size of the Series CRS Cylinder makes it ideal for
applications where cylinder length is critical.
■ Series CRS Cylinders have been tested to 10 million cyclesunder normal conditions.
■ Thru and threaded holes for easy cylinder mounting.
■ Optional accessories provide additional mounting flexibility.
■ Nitrile piston and rod seals for long life and low maintenance.
■ Optional Fluoro-Elastomer seals for greater fluid compatibility.Consult PHD for high temperature use.
■ Field repairable for extended life.
■ Optional shock pads extend cylinder life and minimize pistonnoise in applications where the piston contacts the headand/or cap. The shock pad design adds no additional length tothe cylinder.
■ Available with two piston lengths. The standard piston providesthe shortest possible units. The wide piston provides additionalrod end stability and magnet capability for use with PHDMagnetoresistive and Reed Switches.
■ Switches may be mounted on three sides of the cylinder formaximum flexibility (two sides for 12 and 16 mm sizes) andprovide a signal on extension and retraction with strokes asshort as 1/4 inch [5 mm].
We recommend Series CRS Compact Cylinders.For more information, see PHD’s main catalog.
5
www.phdinc.com/products/classic • (800) 624-8511
CLAS
SIC0
6
Series O Compact Oval Cylinders
Oval piston provides high force in a compact package.
For new applicationswe recommend
Series CRS Cylinders.See PHD’s main catalog.
O
6
www.phdinc.com/products/classic • (800) 624-8511
CLASSIC06
ORDERING DATA: SERIES O COMPACT OVAL CYLINDERS
A 3/4 1/2x
CYLINDERSIZE
R1-T1–
TO ORDER SPECIFY:Product, Series, Type, Design No., Mounting Style,Bore Size, Stroke, and Options.
C O 1 R
PRODUCTC - Cylinder
SERIESO - Compact Oval
EFFECTIVEAREA (in )
3/4"1"
1-1/4"
.518
.8581.281
DESIGN NO.
STANDARDSTROKE LENGTHS
1/8" to 2" in1/8" increments
2-1/4" to 4" in1/4" increments
MOUNTING STYLE
A - Thru holes with c'bore in the headC - Threaded holes in the face of the capR - Threaded holes in the face of the head
TYPEA - Thin cap, shortest possible unitB - Thin cap with wide pistonNOTE: Wide piston adds 1/2"to the overall cylinder length andis for use with magnetic option -E4
OPTIONS
Standard ports are in the cap in position 5.
2E4
F1K __
R1
T1U1
- Magnetic piston for use with PHD Miniature Hall Effect Switches (Model COB)- Extended length wrench flats.- Extra Rod Extension in 1/8" increments Length Code is 1 = 1/8"- Rotating Piston Rod (Due to Oval Piston Design, Non-Rotating Rod is Standard.) (See Specifications chart.)- Male Rod End (Female Rod End is Std.)- Both ports in the head end in position 1.
CYLINDERBORE3/4"
1" & 1-1/4"
- Magnetic piston for use with PHD Miniature Hall Effect Switches (Model COD)- Extended length wrench flats.- Extra Rod Extension in 1/8" increments Length Code is 1 = 1/8"- Rotating Piston Rod (Due to Oval Piston Design, Non-Rotating Rod is Standard.) (See Specifications chart)- Male Rod End (Female Rod End is Std.)- Both ports located in the head in position 1- Both ports located in the cap in position 1- One port in the head and cap in position 2- Mac 44 Ready Cap for 3/4" bore only- Mac 45 Ready Cap for 1" and 1-1/4" bores only
C 3/4 1/2x R1-T1–
TO ORDER SPECIFY:Product, Series, Type, Design No., Mounting Style,Bore Size, Stroke, and Options.
C O 1 R
DESIGN NO.
1/8" to 2" in1/8" increments
2-1/4" to 4" in1/4" increments
MOUNTING STYLEA - Thru holes with c'bore in the head and capB - Threaded holes in the bottom face of the head and capC - Threaded holes in the face of the capE - Threaded holes in the side face of the head and capF - Drill and c'bore through the head and capR - Threaded holes in the face of the head
TYPEC - Thick cap, wide range of port and mounting optionsD - Thick cap with wide pistonNOTE: Wide piston adds 1/2"to the overall cylinder length andis for use with magnetic option -E4.
CYLINDERSIZE
PRODUCTC - Cylinder
SERIESO - Compact Oval
3/4"1"
1-1/4"
.518
.8581.281
OPTIONS
Standard ports are located in position 5 in the cap.Valves must be customer supplied.See chart at left for ordering numbers.Consult PHD for other Valve-On-Cap configurations.
EFFECTIVEAREA (in )2 E4
F1K __
R1
T1U1U2U6U10U15
MAC VALVE ORDERING NUMBERS
MAC VALVE44A-AAA-xxx-xxx Modification #2484
45A-FA2-xxxx-xxxNOTE: The “x” denotes possible available options. Consult
your local distributor.
STANDARDSTROKE LENGTHS
7
www.phdinc.com/products/classic • (800) 624-8511
CLAS
SIC0
6
MODEL COA & COBTHIN CAP
MODEL COC & CODTHICK CAP
* NOTE: CAP IS NOT SYMMETRIC ON 3/4 SIZE UNIT.DIMENSION N IS .118 ON SIDE SHOWN AND .039ON OTHER THREE SIDES.
B
3 1
4
4X C RADIUS 2
A
D THREADE DIA. RODF WRENCH FLAT x .125 LONG(FLAT LOCATION AS SHOWN±10° ON STANDARDNON-ROTATING MODEL)
CYLINDER FASTENERLOCATION - REF
.157
G + STROKE
.236H
K
M
N*P
S
2X 10-32 PORT x .125 DPSTANDARD PORTLOCATION
SWITCH MOUNTING SLOTS
B
4.157
T + STROKE
H
A3 1
2
A
D THREADE DIA. RODF WRENCH FLAT x .125 LONG(FLAT LOCATION AS SHOWN±10° ON STANDARDNON-ROTATING MODEL)
CYLINDER FASTENERLOCATION - REF
1/8 NPT10-32 x .15 FOR 3/4 BORE
NOTES:1) STROKE LENGTH TOLERANCE IS +2 mm/–0 mm2) PORT POSITIONS INDICATED BY CIRCLED NUMBERS
4X C RADIUS
SWITCH MOUNTING SLOTS
H
U
V5
5
DIMENSIONS: SERIES O COMPACT OVAL CYLINDERS
* Refers to piston width.
All dimensions are reference only unless specifically toleranced.
BORE EFFECTIVE LETTER DIMENSIONSIZE AREA (in2) A B C D E F G (NARROW*) G (WIDE*)
3/4 0.518 1.654 1.102 .197 10-32 x .375 DP .314 .250 1.142 1.6421 0.858 2.047 1.339 .276 1/4-28 x .375 DP .394 .312 1.260 1.760
1-1/4 1.281 2.441 1.496 .276 5/16-24 x .500 DP .472 .375 1.260 1.760
BORE LETTER DIMENSIONSIZE H K M N P S T (NARROW*) T (WIDE*) U V3/4 .472 1.575 .965 .118 .177 1.024 1.378 1.878 .472 .7091 .591 1.969 1.260 .039 .177 1.378 1.615 2.115 .669 .709
1-1/4 .591 2.362 1.417 .039 .197 1.614 1.615 2.115 .748 .945
8
www.phdinc.com/products/classic • (800) 624-8511
CLASSIC06
BORE LETTER DIMENSIONSIZE AE AF AH AG (NARROW*) AG (WIDE*) Z3/4 .807 .236 #6 .983 1.485 .9451 .906 .295 #8 1.162 1.662 1.140
1-1/4 1.024 .295 #10 1.083 1.583 1.280
DIMENSIONS: SERIES O COMPACT OVAL CYLINDERS
STYLE F
STYLE R
STYLE E
STYLE B
STYLE C
STYLE A
Counter bore on head end only on Models COA and COB.
* Refers to piston width.
All dimensions are reference only unless specifically toleranced.
BORE LETTER DIMENSIONSIZE AA AB AC3/4 8-32 x .47 .551 1.2601 10-24 x .59 .787 1.496
1-1/4 1/4-20 x .59 .945 1.890
BORE LETTER DIMENSIONSIZE AA AB AC3/4 8-32 x .47 .551 1.2601 10-24 x .59 .787 1.496
1-1/4 1/4-20 x .59 .945 1.890
BORE LETTER DIMENSIONSIZE AE AF AG (NARROW*) AG (WIDE*) AI3/4 .768 .236 .985 1.485 8-32 x .311 .906 .295 1.083 1.583 10-24 x .39
1-1/4 1.024 .295 1.083 1.583 1/4-20 x .50
BORE LETTER DIMENSIONSIZE AB AC AM AN3/4 .551 1.260 #8 .201 .787 1.496 #10 .25
1-1/4 .945 1.890 1/4 .30
BORE LETTER DIMENSIONSIZE AF AG (NARROW*) AG (WIDE*) AL3/4 .158 1.063 1.563 10-24 x .281 .217 1.181 1.681 1/4-20 x .35
1-1/4 .217 1.181 1.681 5/16-18 x .44
3 1
4
2
2X AA THREADAB
AC 1 3
4
2
2X AA THREADAB
AC
Z AG+STROKE
3 1
4
2 3X DRILL & C'BORE FORAH SHCS
AF
AE CL
AF
AE1 3
2
4 3X AI THREAD
AG+STROKE
CL
AG+ STROKE
AF
1 3
2
4
2X AL THREADAN
3 1
4
2
2X DRILL & C'BOREFOR AM SHCSAB
AC
9
www.phdinc.com/products/classic • (800) 624-8511
CLAS
SIC0
6
OPTIONS/DIMENSIONS: SERIES O VALVE-ON-CAP CYLINDERS
MAC 44 AND 45 VALVE READY CAP
Optional valve mounted on the cap provides a compactcylinder/valve package requiring only one air line for the double-acting unit. Valve is customer supplied. Consult your localdistributor for valve options. For the 1" and 1-1/4" bore units,
1-1/4" BORE CYLINDER WITH MAC 45 VALVE (Valve is customer supplied) OPTION – U15
U15U10
1" BORE CYLINDER WITH MAC 45 VALVE (Valve is customer supplied) OPTION – U15
integral flow controls are available as an option on the Mac 45 valve.Consult PHD for other valve brands or combinations.
Maximum operating pressure for a Mac 44 air valve is 120 psi.
3/4" BORE CYLINDER WITH MAC 44 VALVE (Valve is customer supplied) OPTION – U10
All dimensions are reference only unless specifically toleranced.
NOTE: Two #5-40 UNC-2B x 1-1/4SHCS are required formounting with flowcontrols.Two #5-40 UNC-2B x 7/8SHCS are required formounting without flowcontrols.
2X 1/8 NPTF PORTSIN
EX
.585.93
.661
1.963
3.113
1.02
1.02
.7051.610
.480
1.18
1.819
.30
.765 WITHOUT FLOW CONTROLS
1.08 WITH FLOW CONTROLS
.37
BMAC
A
EE
BA
NOTE: Two #4-40 UNC-2B x 1/2 SHCS are required for mounting.
3X 10-32 UNF PORTS
.394.197
.254 .434.827
1.220
2.595
.975.395
.140 .3101.245
.789.159
MA
CEB
INEA
BA
.504
2X 1/8 NPTF PORTS
INEX
.585.93
.915
2.225
3.355
1.02
1.02
.7051.610
.480
1.18
1.976
.30
.765 WITHOUT FLOW CONTROLS
1.08 WITH FLOW CONTROLS
.37
BMAC
A
EE
BA
NOTE: Two #5-40 UNC-2B x1-1/4 SHCS arerequired for mountingwith flow controls.Two #5-40 UNC-2B x7/8 SHCS are requiredfor mounting withoutflow controls.
10
www.phdinc.com/products/classic • (800) 624-8511
CLASSIC06
Series AS, AVS, HVS Spherical Mount
®
as, avs, hvs
11
ww
w.phdinc.com
/products/classic • (800) 624-8511
CLASSIC06
ORDERING DATA: SERIES AS, AVS, HVS SPHERICAL MOUNT
3/4", 1", 1-1/8", 1-3/8" BORE SIZES
P-D1-1/8S x -2AV
MOUNTING STYLE
SERIES BORE
AV, HV
3/4"1"
1-1/8"1-3/8"
PROXIMITY SWITCHMOUNTING BRACKETS
SIZE NO.-31-32-33-34
TO ORDER SPECIFY:Series, Mounting Style, Bore Size,Stroke, and Options.
If Spherical Rod End is required,specify with Part Number listed.
BORE SIZE
3/4" BORE1/4" Rod Dia.1/4-28 Thread
1" BORE5/16" Rod Dia.5/16-24 Thread
1-1/8" BORE3/8" Rod Dia.3/8-24 Thread
1-3/8" BORE1/2" Rod Dia.1/2-20 Thread
See Switches and Sensors sectionof PHD’s main catalog for completeordering information.
CYLINDER SERIES
STANDARD STROKE LENGTH1/4" to 6"
strokes available
Longer Strokes Available,Consult PHD.
OPTIONS
AVHVA
- 150 psi Air- 1500 psi Hyd.- 150 psi Air (Series A not available in 1-3/8" Bore.)
B
D
E
M
PV
- Shock Pads on both ends of each cylinder (Not available on Series HVS).- Cushion on both ends of each cylinder (not available on Series HV 3/4", 1", and 1-1/8" sizes or on cap end of 1-3/8" Bore)- Magnetic Pistons for PHD Hall Effect Switches (not available on Series A)- Magnetic Pistons for PHD Reed Switches (not available on Series A)- Port Controls on both ends- Fluoro-Elastomer Seals
S - Spherical mount on cap end
ROD ENDTHREAD SIZE PART NUMBER
1/4" - 285/16" - 243/8" - 241/2" - 20
7113-0017113-0027113-0037113-004
SPHERICAL MOUNT ROD ENDS
12
www.phdinc.com/products/classic • (800) 624-8511
CLASSIC06
DIMENSIONS: SERIES AS, AVS, HVS SPHERICAL CAP END;3/4", 1", 1-1/8" BORE SIZES
A3/87/169/16
B.468.437.406
C.500.625.718
E16°
13.5°12°
F.281.344.406
G.375.438.500
J.750.812.938
K.251.313.376
L1.4681.5621.844
LBAS
1.750AVS & HVS
2.250
N1.3121.3751.625
O.375.437.500
P Q.375.437.562
LETTER DIMENSIONBORESIZE3/41
1-1/8
R.750.875
1.000
RM.625.750.750
VAS
1.000AVS & HVS
1.500
AS & AVS.125HVS.375
SERIES AS3.3753.4383.562
3.6253.6873.812
BORESIZE3/41
1-1/8
ZW DIMENSIONSERIES AVS SERIES HVS
2.8752.9373.062
A WRENCH FLAT
B AVAILABLEROD END THREAD
SEE NOTES
R DIA K ± .001 DIA
O L ZW + STROKE
N
R DIAK ± .001 DIA
.250
V J
O
G F
E° – ALLOWABLE ANGLEOF MISALIGNMENT
Q DIA
RM DIA .500 P + STROKE
2X 1/8 NPTE° – ALLOWABLE ANGLEOF MISALIGNMENT
C DIABALL
C DIABALL
GF
LB + STROKE.750 .500
ROD SPHERICAL END: SPHERICAL END ON CYLINDER ROD NOT INCLUDED - MUST BE ORDERED SEPARATELYCUSHIONS: ADD 1/2" TO ALL (+ STROKE) DIMENSIONS FOR EACH CUSHIONSHOCK PADS: ADD 1/4" TO ALL (+ STROKE) DIMENSIONS FOR EACH SHOCK PADSPRING RETURN: ADD AN ADDITIONAL STROKE LENGTH TO ALL (+ STROKE) DIMENSIONS (2 x STROKE)
All standard rod ends have four wrench flats.
13
www.phdinc.com/products/classic • (800) 624-8511
CLAS
SIC0
6
DIMENSIONS: SERIES AS, AVS, HVS SPHERICAL CAP END;3/4", 1", 1-1/8" BORE SIZES
3.812 + STROKE
.656
.625 .500
.750 DIA
1.250 DIA 2.438 + STROKE
.938DIA
BALL
.625.500
1.375 .688
3/4 WRENCH FLAT
.531 AVAILABLEROD END THREAD
SEE NOTES
1.312 DIA .501 ± .001 DIA
5.750 + STROKE
2.125
1.312 DIA.501 ± .001 DIA
.250
.438
.656
1.250
2.437
1.031
.265
.938DIA
BALL
12° – ALLOWABLE ANGLEOF MISALIGNMENT
12° – ALLOWABLE ANGLEOF MISALIGNMENT
2X 1/4 NPT
ROD SPHERICAL END: ROD SPHERICAL END IS NOT INCLUDED - MUST BE ORDERED SEPARATELYCYLINDER ROD END: CYLINDER ROD END WILL HAVE 1/2-20 THREADCUSHIONS: AVAILABLE ON ROD END ONLY (-DR). CYLINDER LENGTH IS NOT AFFECTEDSHOCK PADS: ADD 1/4" TO ALL (+ STROKE) DIMENSIONS FOR EACH SHOCK PADSPRING RETURN: ADD AN ADDITIONAL STROKE LENGTH TO ALL (+ STROKE) DIMENSIONS (2 x STROKE)
All standard rod ends have four wrench flats.
14
www.phdinc.com/products/classic • (800) 624-8511
CLASSIC06
Series EA, EH, EL, ESHeavy Duty Cylinder
EA, EH, EL, ES
®
15
ww
w.phdinc.com
/products/classic • (800) 624-8511
CLASSIC06
ORDERING DATA: SERIES EA, EL, EH, ES CYLINDERS3/4", 1-1/8", 1-3/8" BORE SIZES
EA x - P2MS4 - D 5/8 ROD F-M-V
MOUNTING STYLE OPTIONS
SERIES BORE
EA, EL3/4"
1-1/8"1-3/8"
PROXIMITY SWITCHMOUNTING BRACKETS
SIZE NO.-35-36-37
TO ORDER SPECIFY:Series, Mounting Style, Bore Size,Stroke, Port Controls, Cushions andShock Pads, Oversize Rod, and Options.
SERIES
BORE SIZE
3/4" BORE3/8" Std. Rod Dia.
1/4-28 Thread
1-1/8" BORE1/2" Std. Rod Dia.
3/8-24 Thread
1-3/8" BORE5/8" Std. Rod Dia.7/16-20 Thread
STANDARDSTROKE LENGTHS
CUSHION OR SHOCK PAD
OVERSIZED ROD
1-1/8 and 1-3/8" Bore onlyTo be specified only whenusing a non-standard roddiameter.
See Switches and Sensors sectionof PHD’s main catalog forcomplete ordering information.
1-1/8 - -
BUILT-IN METER OUTFLOW CONTROL VALVE
STOCK STROKE LENGTHS1/2" to 6"
in 1/2" increments
Longer Strokes Available,Consult Factory.
(Cushions and Shock Pads arenot available on the same endof cylinder. Shock Pads are notavailable for Hydraulic use.)
DDRDCBBRBC
- Cushions on both ends- Cushion on rod end- Cushion on cap end- Shock Pads on both ends- Shock Pad on rod end- Shock Pad on cap end
EAELEHES
- 150 psi Air- 500 psi Hyd.- 3000 psi Hyd.- 5000 psi Hyd.
PPR
PC
- Flow control both ends- Flow control on head end
Not available on MT1- Flow control on cap end
Not available on MT2
MS2
MS4
MF1MF2MT1MT2MP1MR1
- Foot Mount through holes Not available on 1-1/8" and 1-3/8" ES Series- Bottom Mount, Tapped holes in head and cap- Rod End Flange- Cap End Flange- Head Trunnion- Cap Trunnion- Clevis Mount, Cap end with pin- Rod Mount, Tapped holes on front face of head
AE
FIJ
_KLM
NRTUVWZ1
- Stroke Adjustment (1/2" standard)- Magnetic Piston for PHD Hall Effect Switches (Series EA and EL only)- #1 Rod End (See Note 1)- #4 Rod End, female thread on rod (See Note 1)- #2X Rod End, twice as long as standard thread (See Note 1)- Extra Rod Extensions (See Note 2)- Coarse Thread Rod End (See Note 1)- Magnetic Piston for PHD Reed Switches (Series EA and EL only)- Plain Rod End (See Note 1)- Port in Position 2- Port in Position 3- Port in Position 4- Fluoro-Elastomer Seals- Close Tolerance Stroke, ± .005 stroke length- Electroless Nickel Plate all ferrous parts excluding rod ends
NOTE: SAE Ports available. Consult PHD for sizes.
DOUBLERODEND
D
Notes:1) For double rod cylinders, rod end options
will be applied to both ends of cylinder.2) For double rod cylinders, -_K extension will
be applied to one end only (headend/primary mounting end).
16
www.phdinc.com/products/classic • (800) 624-8511
CLASSIC06
DIMENSIONS: SERIES EA, EH, EL, ES CYLINDER 3/4", 1-1/8", 1-3/8" BORE SIZES
4X RT THREAD
BD SQ
MS4
MF2
MS2
MT2
MR1
MF1
MP1 (CLEVIS PIN INCLUDED)
MT1
E SQ
RM DIA
4
2
13
BASIC CYLINDER DIMENSIONS
FT THREAD
A
.250
Y1
ZB + STROKE
P + STROKE
LB + STROKEGAMM ROD DIA
WA
1.125
2X EE NPT
K
D WRENCH FLAT
V
2
3
4
1
SN+ STROKE
4X NT* THREAD
XT
TN
1
2
3
4
RM DIA+.000- .005
TF
R E
F3
1ZB + STROKE
UF
4
TF
2
4X FB DIA THRU
R E
F3
1 ZF + STROKE
UFW
RM DIA+.000- .005
V
4 2
TSUS
4X FBDIA THRU
3
1
24ST
SY
XS SS+ STROKE
SU
SYSU
EUT
3
1
24
TL EUT
3
1
24
TL
TD DIA+.000- .001
BOTH SIDES
XGXJ + STROKE
TD DIA+.000- .001
BOTH SIDES
1
4
3
2
CC DIA
CBCL
XC + STROKE
MR RAD
LM
CD DIA THRU
All standard rod ends have four wrench flats (two wrench flats with “I” option).
PORT POSITIONS: INDICATED BY CIRCLED NUMBERSCUSHIONS: CYLINDER LENGTH IS NOT AFFECTED BY ADDITION OF CUSHIONS
MT1 (-DR) & MT2 (-DC) CUSHION NEEDLES ARE IN POSITION 3SHOCK PADS: CYLINDER LENGTH IS NOT AFFECTED BY ADDITION OF SHOCK PADSMS2 MTG. STYLE: NOT AVAILABLE ON 1-1/8" & 1-3/8" SERIES ES CYLINDERS*MS4 MTG. STYLE: UNITS WITH OPTION -R OR -U WITH/-P. THE NT THREAD SIZE AND DEPTH WILL BE REDUCED AS FOLLOWS: 3/4" BORE NOT AVAILABLE WITH -ROR -U WITH/-P. 1-1/8" BORE NT=10-32 x .19, 1-3/8" BORE NT=1/4-28 x .25
10-32 X .25 DP1/4-28 X .50 DP5/16-24 X .62 DP
LETTER DIMENSION
3/41-1/81-3/8
A.750.750.750
BD1.0001.2501.625
CB.375.500.625
CC1.0001.2501.750
CD.375.500.625
CL.8751.1251.500
D.312.438.562
E1.3751.7502.250
EE1/41/43/8
.312
.500
.500
F FB.219.281.344
FT1/4-283/8-247/16-20
GA1.8122.1882.625
K0.00.250.312
L.500.625.750
LB4.0004.3754.812
M.375.500.625
MM.375.500.625
MR.570.720.910
NT*10-32 X .25 DP1/4-28 X .31 DP5/16-24 X .50 DP
P2.1882.3122.438
R.9381.2501.625
RM.7501.0001.250
RTBORESIZE
LETTER DIMENSION
3/41-1/81-3/8
SN2.1882.3122.438
SS1.062.938.938
ST.281.344.469
SU.250.312.438
SY.500.8121.062
TD.500.750.875
TF1.9382.5003.000
TL.500.750.875
TN.562.625.875
1.9382.5003.000
TS UF2.3753.0003.750
US2.3753.0003.750
UT2.3753.2504.000
V.125.250.250
W.6881.0001.000
WA.156.219.250
XC4.8755.5006.062
XG1.6252.0622.438
XJ3.8124.3754.875
XS2.1882.7503.188
XT1.6252.0622.438
Y11.2501.5621.938
ZF4.6885.3755.812
BORESIZE ZB
4.3755.1255.625
4X FB DIA THRU
17
www.phdinc.com/products/classic • (800) 624-8511
CLAS
SIC0
6
DIMENSIONS: SERIES EA, EH, EL, ES CYLINDER DOUBLE ROD END
E SQ
RM DIA
4
2
13
BASIC CYLINDER DIMENSIONS
FT THREAD
A.250
Y1
ZR + (2 x STROKE)
P + STROKE
LB + STROKEGAMM ROD DIA
WA BOTH ENDS
GA
2X EE NPT
K
D WRENCH FLAT
V BOTH ENDS
A
MS4
MS2
MR1
MT1
2
3
4
1
SN+ STROKE
4X NT* THREAD
XT
TN
TSUS
4X FBDIA THRU
3
1
24ST
SY
XS SS+ STROKE
SU
SYSU
EUT
3
1
24
TLTD DIA+.000
- .001BOTH SIDES
XG
3/41-1/81-3/8
SN2.1882.3122.438
SS1.062.938.938
ST.281.344.469
SU.250.312.438
SY.500.8121.062
TD.500.750.875
TF1.9382.5003.000
TL.500.750.875
TN.562.625.875
1.9382.5003.000
TS UF2.3753.0003.750
US2.3753.0003.750
UT2.3753.2504.000
V.125.250.250
W.6881.0001.000
WA.156.219.250
XG1.6252.0622.438
XS2.1882.7503.188
XT1.6252.0622.438
Y11.2501.5621.938
BORESIZE ZR
5.4386.4387.312
LETTER DIMENSION
3/41-1/81-3/8
A.750.750.750
BD1.0001.2501.625
BORESIZE
LETTER DIMENSIOND
.312
.438
.562
E1.3751.7502.250
EE1/41/43/8
.312
.500
.500
F FB.219.281.344
FT1/4-283/8-247/16-20
GA1.8122.1882.625
K0.00.250.312
LB4.6875.4376.312
MM.375.500.625
NT*10-32 X .25 DP1/4-28 X .31 DP5/16-24 X .50 DP
P2.1882.3122.438
R.9381.2501.625
RM.7501.0001.250
RT10-32 X .25 DP1/4-28 X .50 DP5/16-24 X .62 DP
MF1
4X RT THREAD
BD SQ
1
2
3
4
RM DIA+.000- .005
PORT POSITIONS: INDICATED BY CIRCLED NUMBERSCUSHIONS: CYLINDER LENGTH IS NOT AFFECTED BY ADDITION OF CUSHIONS MT1 (-DR) CUSHION NEEDLES ARE IN POSITION 3SHOCK PADS: CYLINDER LENGTH IS NOT AFFECTED BY ADDITION OF SHOCK PADSMS2 MTG. STYLE: NOT AVAILABLE ON 1-1/8" & 1-3/8" SERIES ES CYLINDERS*MS4 MTG. STYLE: UNITS WITH OPTION -R OR -U WITH/-P. THE NT THREAD SIZE AND DEPTH WILL BE REDUCED AS FOLLOWS:3/4" BORE NOT AVAILABLE WITH -R OR -U WITH/-P. 1-1/8" BORE NT=10-32 x .19, 1-3/8" BORE NT=1/4-28 x .25
All standard rod ends have four wrench flats (two wrench flats with “I” option).
TF
R E
3
1
UF
4 2
F
ZR + (2 x STROKE)
WRM DIA+.000
- .005
V4X FB DIA THRU
18
www.phdinc.com/products/classic • (800) 624-8511
CLASSIC06
Series NEAG, and NEHGHeavy Duty, Non-Rotating Cylinders
®
NE
19
ww
w.phdinc.com
/products/classic • (800) 624-8511
CLASSIC06
SC x - P2NEAG - B N-V-Z
SERIES BORE
NPG, NHG
NEAG, NEHG
1-1/8"1-3/8"1-1/8"1-3/8"
PROXIMITY SWITCHMOUNTING BRACKETS
SIZE NO.-33-36-36-37
TO ORDER SPECIFY:Spring Return, Series,Mounting Style, Bore Size,Stroke, and Options.
See Switches and Sensors sectionof PHD’s main catalog forcomplete ordering information.
MF1 1-1/8 -
NOTE: SAE Ports available. Consult PHD for sizes.
MOUNTING STYLEMF1MF2MT1MP1
MR1
MS2MS4
- Head End Flange- Cap End Flange- Head Trunnion- Clevis Mount, Cap end (furnished with pin)- Rod Mount, Tapped holes front face of head- Foot Mount through holes- Bottom Mount - 4 holes total Tapped in head and cap
STOCK STROKE LENGTHS1/2" to 6"
in 1/2" increments
Longer Strokes Available,Consult PHD.
STANDARDSTROKE LENGTHS
CUSHION OR SHOCK PAD
(Cushions, Shock Pads, andSpring Return are not availableon the same end of cylinder.Shock Pads are not availablefor Hydraulic use.)
DDRDCBBRBC
- Cushions on both ends- Cushion on rod end- Cushion on cap end- Shock Pads on both ends- Shock Pad on rod end- Shock Pad on cap end
OPTIONS
E
HM
NSVWZ1
- Magnetic Piston for PHD Hall Effect Switches (not applicable on Series NEHG)- Plain keyed rod end- Magnetic Piston for PHD Reed Switches (not applicable on Series NEHG)- Plain Rod End- Keyed and Threaded Rod End- Fluoro-Elastomer Seals- Close Tolerance Stroke, ± .005 Stroke Length- Electroless Nickel Plate all ferrous parts
PORT CONTROL®
BUILT-IN METEROUT FLOW
CONTROL VALVEP
PR
PC
- Flow control both ends- Flow control on head end- Flow control on cap end
BORE SIZE
1-1/8" BORE5/8" Rod Dia.
7/16-20 Threads
1-3/8" BORE3/4" Rod Dia.
9/16-18 Threads
CYLINDER SERIES
NEAGNEHG
- 150 psi Air- 3000 psi Hydraulic
1
DIMENSIONS: SERIES NE HEAVY DUTY; 1-1/8", 1-3/8" BORE
20
www.phdinc.com/products/classic • (800) 624-8511
CLASSIC06
DIMENSIONS: SERIES NE HEAVY DUTY; 1-1/8", 1-3/8" BORE
SN + STROKEXT
TN
4X NT THREAD
MS4
MF2
MR1
MF1
MS2
MT1
E SQ
RM DIA
4
3 1
2
P + STROKE
MM ROD DIA
FT THREAD
WA
A.375
ZJ + STROKE
LB + STROKE
2X EE NPT
GA 1.125D WRENCH FLAT
K
.250
Y1
2
3
4
1
ZF + STROKE
.500
R
TF
E
UF
4
1
2
4X FBDIA THRU
3
SYSYSU
SUXS .938
+ STROKE
TSUS
4
1
2
3ST
4X FBDIA THRU
UT
4
1
2
3E
XG
TD+.000 -.001 DIA
BOTH SIDES
TL
1-1/81-3/8
RT.312.438
SN ST SU SY TD TF TL TN TS UF US UT WABORESIZE
2.3122.438
1/4-28 x .50 DP5/16-24 x .63 DP
.375
.500.8121.062
.750
.8752.5003.000
.750
.875.625.875
2.5003.000
3.0003.750
3.0003.750
3.2504.000
.250
.312
LETTER DIMENSIONXC
5.6256.188
XG2.1882.562
XS2.8753.312
XT2.1882.562
Y11.5621.938
ZF5.5005.938
ZJ5.2505.750
1-1/81-3/8
A.7501.000
BD1.2501.625
BORESIZE
LETTER DIMENSIONCB
.500
.625
CC1.2501.750
CD.500.625
1.1251.500
CL D E EE FB FT GA K L LB M.500.625
1.7502.250
1/43/8
.281
.3447/16-209/16-18
2.1882.625
.250
.312.625.750
4.3754.812
.500
.625
MM.625.750
MR.720.910
NT1/4-28 x .31 DP5/16-24 x .50 DP
P2.3122.438
R1.2501.625
RM1.0001.250
R
TF
E
UF
4
1
2
4X FB DIA THRU
3
.250ZJ + STROKE
1.125RM
+.000 -.005 DIA .500
1
2
3
4 BD SQ
4X RT THREAD
RM+.000 -.005DIA
1
4
3
2
CC DIA
CBCL
XC + STROKE
MR RAD
L
M
CD DIA THRU
MP1 (CLEVIS PIN INCLUDED)
BASIC CYLINDER DIMENSIONS
PORT POSITIONS: INDICATED BY CIRCLED NUMBERSCUSHIONS: ADD 1.000 TO ALL (+ STROKE) DIMENSIONS FOR EACH CUSHIONSHOCK PADS: CYLINDER LENGTH IS NOT AFFECTED BY ADDITION OF SHOCK PADS
All standard rod ends have four wrench flats (two wrench flats with “I” option).
All dimensions are reference only unless specifically toleranced.All dimensions are reference only unless specifically toleranced.
21
www.phdinc.com/products/classic • (800) 624-8511
CLAS
SIC0
6
For new applicationswe recommend
Series RFS, RCC, or RAS/RLSSee PHD’s main catalog.
Series 0180 Miniature Rotary Actuators0180
22
www.phdinc.com/products/classic • (800) 624-8511
CLASSIC06
TO ORDER SPECIFY:Series, Size, Type, Design No.,Options, and Seals.
1
TYPE1 - Single Rack2 - Double RackT - TandemNOTE: 018x50,018375, and 018875are available in -2double rack only.
- - 0 1
OPTIONS0 - No Sensor3 - Sensor Transducer with Transition Plate
175MODEL NUMBER
SIZE50 - 1/2" [12 mm] Bore75 - 3/4" [19 mm] Bore
DESIGN NO.1 - 018x753 - 018x50
SEALS1 - Buna-N (standard)2 - Fluoro-Elastomer
SERIES NUMBER FOR PORT & MTG. HOLE TYPEIMPERIAL METRIC POSITION
0 5 2 Position Actuator3 8 3 Position Actuator -(Not
available on Size 50)
NOTES:1) Sensor must be used with a PHD Set Point
Module. See Switches and Sensors sectionfor information and ordering data.
0018
UNITS WITH IMPERIAL SHAFTS AND KEYWAYS
1
TYPE1 - Single Rack2 - Double RackT - TandemNOTE: 018x50, and018975 are availablein -2 double rack only.
- - 0 1
OPTIONS0 - No Sensor3 - Sensor Transducer with Transition Plate
175MODEL NUMBER
SIZE50 - 1/2" [12 mm] Bore75 - 3/4" [19 mm] Bore
DESIGN NO.1 - 018x75x3 - 0186502
SEALS1 - Buna-N (standard)2 - Fluoro-Elastomer
NOTES:1) Sensor must be used with a PHD Set Point
Module. See Switches and Sensors sectionfor information and ordering data.
6018
UNITS WITH METRIC SHAFTS AND KEYWAYS
SERIES NUMBER FOR PORT & MTG. HOLE TYPEIMPERIAL METRIC POSITION
— 6 2 Position Actuator— 9 3 Position Actuator -(Not
available on Size 50)
TO ORDER SPECIFY:Series, Size, Type, Design No.,Options, and Seals.
ORDERING DATA: MINIATURE ROTARY ACTUATORS
23
ww
w.phdinc.com
/products/classic • (800) 624-8511
CLASSIC06
DIMENSIONS: SERIES 018x75x M
INIATURE ROTARY ACTUATORS
.500[12.7]
2.375 [60.5]4.750 [121] ANGLE LIMITING SEGMENT
AUXILIARY MTG LOCATIONLIMITS ROTATION TO 45° FROMMIDPOINT OF ROTATION
1.500[38.1]
.250[6.3]
SHAFT STOP PIN
ANGLE LIMITING SEGMENTS ALLOW180° MAX ROTATION0° MIN ROTATION
2X REF CAP AREA
1.500[38.1]
10-24 [M8 x .5]THREAD x .375 [10] DP4X TOP & BOTTOM
2.000 [50.8].875[22.2]
10-32 THREAD x .312[M5 x .8] DP
2.500 [63.4]10-24 [M5 x .8]THREAD x .250 [6.3] DP4X FRONT & BACK
2.000[50.8]
1.000[25.4]
BASIC DIMENSIONSSERIES 018x75x & 018x752 UNITS
4.250 [107.9]
.310[7.9] 1.000
[25.4] SQ
.810[20.6]
2.125 [53.97]
.500[12.7]
4.250 [107.6]2X 1/8 NPT
[1/8 BSP]
.190[4.8]
1.500[38.1]
.810[20.6]
2.125 [53.8]
SINGLE RACK UNITSERIES 018x751
DOUBLE RACK UNITSERIES 018x752
AIR/OIL TANDEM UNITSERIES 018x75T
.500[12.7]
2.000 [50.8]
2X 1/8 NPT[1/8 BSP]
2X 1/8 NPT[1/8 BSP]
.375 [9.53]
NOTES:1) ALL DETAILS SHOW UNITS AT MID-ROTATION2) NUMBERS IN [ ] ARE FOR METRIC UNITS AND ARE IN mm.
FOR SHAFTDETAILS SEE
PAGE 3C-5
2.125 [53.9]
.310[7.9]
1.000[25.4]
.810[20.6]
2.125[53.9]
CHECK VALVE FITTING
2.000[50.8]
.500[12.7]
1.000[25.4].188
[4.8]
2X THRU HOLE FOR #8 [M4] SCREW
RESERVOIR ASSEMBLY ISINCLUDED WITH UNIT ANDSHIPPED WITH 3 FEET[1 m] OF FLEXIBLE TUBING 3.62
[92]
.937[23.8]
.687[17.4]
.750[19]
1.000[25.4]
1.000[25.4]
1.000[25.4]
1
3
42
1
3
42
42
All dimensions are reference only unless specifically toleranced.
24
www.phdinc.com/products/classic • (800) 624-8511
CLASSIC06
DIMENSIONS: SERIES 018x752 3 POSITION MINIATURE
All dimensions are reference only unless specifically toleranced.
.750
[19]
.500
[12.
7]
2.37
5 [6
0.3]
5.00
0 [1
27]
2.50
0 [6
3.5]
MAX
.906
[23]
DIA
TYP
2.12
5 [5
3.8]4.
250
[107
.06]
2X A
DJUS
TMEN
T CO
NTRO
L KN
OBFO
R LO
CATI
ON O
F TH
IRD
POSI
TION
ANGL
E AD
JUST
MEN
TS.3
10[7
.9]
1.00
0[2
5.4]
1.57
7 [4
0]
MUL
TI-P
OSIT
ION
UNIT
SERI
ES 0
18x7
52
1.00
0[2
5.4]
NOTE
S:1)
ALL
DET
AILS
SHO
W U
NITS
AT
MID
-ROT
ATIO
N2)
NUM
BERS
IN [
] ARE
FOR
MET
RIC
UNIT
S AN
D AR
E IN
mm
.
1 3
42
42
CB1
AB2
IIII
POR
TS P
RES
SUR
IZED
B 1 &
B2
II
PORT
PRE
SSUR
IZED
- A
FULL
CCW
POS
ITIO
NPO
RT P
RESS
URIZ
ED -
CFU
LL C
W P
OSIT
ION
T°
R°
I°MIDPOINTADJUSTMENTSTOPS
LOCKING SCREWSHOLD MIDPOINTADJUSTMENT IN PLACE
VIEW FROM FRONT OF UNIT
B1C
B2A
IIII
II
OPERATING PRINCIPLEThe PHD Three Position Rotary Actuator yields three output
shaft positions. Both the extreme positions and the midposition canbe adjusted in the field allowing a total rotation from 0° to 180° withthe midpoint anywhere between. Pressurizing port C provides fullcounterclockwise rotation (position I). Pressurizing ports B1 and B2at the same time causes the unit to rotate to position II and to holdat that position. The racks are trapped by the piston and rods (B1and B2) and hold the pinion from rotating, creating the positivemidposition. The midpoint adjustment stops allow the midpoint tobe set by changing the lengths that each piston and rod can stroke.Position III is obtained by pressurizing port A driving the pinionshaft to a full clockwise position.
Output positions can be selected in any sequence allowing theactuator to stop at or pass by the midposition.
SHAFT DETAIL FOR 018x75x
SERIES018075x018375x018575x018875x018675x018975x
ADIMENSION
B C+ .000- .001.375
+ .000- .0259.53
.375
[9.53]
+ .0000- .0003.3939
+ .000- .00710
—
204WoodruffKeyway
3 mm SQx 16 mm LG
B
A Ø
C KEYWAY
IMPERIAL SHAFTS
A Ø
C KEYWAY
METRIC SHAFTS
25
ww
w.phdinc.com
/products/classic • (800) 624-8511
CLASSIC06
DIMENSIONS: SERIES 018x502 M
INIATURE ROTARY ACTUATORS
.750[19]
1.000[25.4]
NOTE: NUMBERS IN [ ] ARE FOR METRIC UNITS AND ARE IN mm.
SERIES
018050018550
018650
ADIMENSION
B C+ .000- .001.250
+ .000- .0256.35
.312
[7.92]
+ .0000- .0003.2362
+ .000- .0076.0
—
203WoodruffKeyway
2 mm SQx 14 mm LG
B
A Ø
C KEYWAY
IMPERIAL SHAFTS
A Ø
C KEYWAY
METRIC SHAFTS
ANGLE LIMITING SEGMENTAUXILIARY MTG LOCATION.LIMITS ROTATION TO 45° FROMMIDPOINT OF ROTATION
ANGLE LIMITING SEGMENTSALLOW 180° MAX ROTATION0° MIN ROTATION
2X 10-32 [M5 x .8] PORT -BARB FITTING
FOR 1/16 [1.6] ID TUBE SUPPLIED
6-32 THREADx .250 [M3 x 6] DP
8-32 THREAD x .250 [M4 x 6] DP4X TOP & BOTTOM
.250[6.3]
SEE DETAILBELOW
1.500 [38.1].594[15]
.312 [7.9].750[19]
8-32 THREAD x .187 [5][M4 x .7] DP4X FRONT & BACK
2.000 [50.8]1.500 [38.1]
1.500[38.1]
1.109[28.2]
2.219 [56.4]1.500 [38.1]
3.000 [76.2]
DOUBLE RACK UNITSSERIES 0180502
SHAFT KEYWAY: SHOWN AT MID-ROTATION - WOODRUFF KEY IS SUPPLIED WITH ALL ACTUATORSROTATION: 180° MAXIMUMPORT POSITIONS: INDICATED BY CIRCLED NUMBERSPORT CONTROLS: NOT AVAILABLE ON SERIES 0183752, 0188752 & 018x502 UNITS. PORT CONTROLS ARE
STANDARD ON ALL OTHER ACTUATORS.MTG. HOLES: CENTERED ON CENTERLINE OF ACTUATOR BODY
.750[19]
1
3
42
26
www.phdinc.com/products/classic • (800) 624-8511
CLASSIC06
We recommend Series CTS Compact Guide Rod Cylinders.For more information, see PHD’s main catalog.
BENEFITS■ The compact size of the Series CTS Compact Guide Rod Cylinder
makes it ideal for non-rotating cylinder applications where unitlength is critical. The CTS also performs as a light duty slidewhere precise location is not required and side loading is limited.
■ Compact Guide Rod Cylinders prevent rotation of toolingconnected to cylinder.
■ Standard tool plate allows easy mounting of PHD Series 190 &191 Grippers.
■ Optional blank tool plate is available for customers to add theirown mounting pattern.
■ Diagonal tool plate allows front mounting of the cylinder whilestill permitting full tool plate retraction.
■ Thru and threaded holes for easy cylinder mounting.
■ Flange brackets and optional accessories provide additionalmounting flexibility.
■ Field repairable for extended life.
■ Nitrile piston and rod seals for long life and low maintenance.
■ Optional fluorocarbon seals for fluid compatibility. Consult PHDfor high temperature use.
■ Optional shock pads extend cylinder life and minimize pistonnoise in applications where the piston contacts the head and/orcap. The shock pad design adds no additional length to thecylinder.
■ Switches may be mounted on three sides of the cylinder formaximum flexibility (two sides for 12 and 16 mm sizes) andprovide a signal on extension and retraction with strokes asshort as 1/8 inch [5 mm].
27
www.phdinc.com/products/classic • (800) 624-8511
CLAS
SIC0
6
Series N Compact Slides
For new applicationswe recommend
Series CTS Cylinders.See PHD’s main catalog.
N
28
ww
w.phdinc.com
/products/classic • (800) 624-8511
CLASSIC06
2
PROXIMITY SWITCHMOUNTING BRACKETS
SC x - P3NAV - D
BORE3/4
1-1/8
SIZE NO.-31-33
TO ORDER SPECIFY:Spring Return, Three Position Unit, Series,Bore, Slide Travel, Mid-Position Travel,Port Control, and Options.
SERIES
SLIDE TRAVEL1/4" to 5" in 1/4" incrementsTotal slide travel from retract
position 1 to extend position 3
CUSHION OR SHOCK PAD
See Switches and Sensorssection in PHD’s main catalogfor complete ordering information.
1-1/8 - E
(Cushions, Shock Pads, andSpring Return are not availablewith -A option or on same end.)
DDRDCBBRBC
- Cushions on both ends- Cushion on rod end- Cushion on cap end- Shock Pads on both ends- Shock Pad on rod end- Shock Pad on cap endNA
NAVNHVNTD
- 150 psi Air- 150 psi Air- 1500 psi Hyd.- 150 psi Air/Oil Tandem
3
THREE POSITION UNIT(specify only if needed)
x
Travel from retract position 1to mid-position 2
MID-POSITION TRAVELSpecify for 3 position units.
OPTIONSA
E
I
M
VWX
Z1
- Stroke adjustment (1/2" standard) - NA, NAV, NTD only- Magnetic Piston for PHD Hall Effect Switches - NAV, NHV, NTD only- Crossover with Reservoir plumbed, filled,
and bled of air - NTD only.- Magnetic Piston for PHD Reed Switches - NAV, NHV, NTD only- Fluoro-Elastomer seals- Close Tolerance Travel, ± .005 travel length- Crossover tube filled with oil and bled of air -
NTD only- Electroless Nickel Plate, all ferrous parts,
excluding rod ends
BORE SIZE
3/4" BORE1/4" Rod Dia.
1-1/8" BORE3/8" Rod Dia.
SPRING RETURN(specify only if needed)
SC - Spring Return on the cap endSC not available with -A option.SR - Spring Return on the rod end
PPRPC
PORT CONTROL OPTIONS- Flow controls on both ends- Flow control on rod end- Flow control on cap end
ORDERING DATA: SERIES N SLIDES
3 POSITION DETAIL
RETRACT
MID-POSITION(CYL. 2 TRAVEL)
EXTEND(CYL. 1 TRAVEL)
3 1
2
!Options may affect unit length.See unit dimension and optionspages for adders.
29
ww
w.phdinc.com
/products/classic • (800) 624-8511
CLASSIC06
DIMENSIONS: SERIES N SLIDES
LETTER DIMENSIONQ
#10 x .215 DP5/16 x .215 DP
AB* B*
MTG HOLES: CENTERED ON CENTERLINE OF CYLINDEROPTIONAL SPRING RETURN: ALL STROKE DIMENSIONS ARE 2 x DESIRED STROKE LENGTHEXAMPLE: DIMENSION “B”+ (2 x DESIRED STROKE)
AC*
AC* + TRVL CYL#1 + TRVL CYL#2
3X 1/8 NPT
3NAV4.3124.312
N SQM
AB* + TRAVEL
B* + TRAVEL .940
1.125RETRACTED
.375
L
.4702X THRU DIA & C'BOREFOR Q SHCS
P SHAFT DIA
O
2X 1/8 NPT
3NA, 3NAV (3 POSITION) DETAIL
CD
K
E
G
2.500 + TRAVEL
.080E
4X THRU DIA & C'BORED FROMOPPOSITE SIDE FOR J SHCS
HF
5.000* + (2 x TRAVEL)
4X 1/8 NPT
NTD (TANDEM) SERIES DETAIL
SLIDESERIES
NxxNxx
BORESIZE3/4
1-1/8
NA2.6902.690
NA1.7501.750
NAV, NHV3.1903.190
NAV, NHV2.2502.250
D1.5602.120
C1.6402.200
E.600.875
F1.7502.500
G.280.390
H1.0001.500
J#6#8
K.500.750
L1.2501.750
M.125.187
N1.0001.500
N1.0001.500
O.812
1.062
P.250.375
3NA3.3123.312
All Cylinder rod ends have four wrench flats.*ADD 1/4" FOR EACH SHOCK PAD; ADD 1/2" FOR EACH CUSHION
All dimensions are reference only unless specifically toleranced.
30
www.phdinc.com/products/classic • (800) 624-8511
CLASSIC06
We recommend Series SD & SE Slides.For more information, see PHD’s main catalog.
BENEFITS■ Linear ball bushings or PHD’s TC fluoropolymer composite bushings
are available in each series providing the best value with the leastpossible slide deflection.
■ Four bushings allow two hardened precision ground shafts to movesmoothly while supporting the tool plate and attached loads, providingrugged precise linear motion.
■ Oversized guide shafts are available with TC bushings for maximumrigidity and minimum deflection.
■ Linear ball bushings provide optimum tool plate accuracy.
■ TC bushings are supplied with internal lubrication for maximum life.
■ Shaft seals are provided on units with linear ball bushings to protectthem from external contamination.
■ Available in five sizes each with an oversized shaft available on eachsize to fit a wide range of linear motion applications.
■ Anodized aluminum alloy tool plates have combination tapped andcounterbored holes and a precisely machined mounting surface,permitting easy attachment of fixturing.
■ Units are powered by PHD Cylinders for long life and a wide range ofcontrol and switch accessories.
■ Options include travel adjustments, shock pads, HushStop™ pads,built-in speed controls (Port Control®), and cushions to fit the slide toyour specific requirements.
■ PHD Reed and Hall Effect Switches and industrial proximity switches areavailable for easy interfacing to electronic controls and logic systems.
■ Ports, Port Control, cushion, switch adjustments, and traveladjustment are on one side for easy access.
■ PHD cylinders are equipped with new long life Buna-N seals. This willreduce maintenance cost and improve cylinder performance.
■ The HushStop™ shock pad option provides significant noise reduction,up to 50%, dependent upon the slide type, size, and your specificapplication.
BENEFITS■ All SK and SL Slides can have either linear ball bushings or
TC fluoropolymer composite bushings to provide optimum perfor-mance with minimum slide deflection for all types of applications.
■ SK and SL Slides are available in six sizes for application to a widerange of tasks.
■ Four bushings allow the hardened and precision ground shafts to movesmoothly, ensuring rugged, precise linear motion of the tool plate andload.
■ Oversize guide shafts are available with TC bushings for maximumrigidity and minimum deflection.
■ Linear ball bushings and TC bushings have internal lubrication formaximum life.
■ Linear ball bushings provide lowest friction, highest load capacity, andoptimum accuracy of tool plate motion.
■ Units with linear ball bushings have shaft wipers to exclude externalcontaminants.
■ Anodized aluminum alloy tool plates with combination tapped andcounterbored holes and a precisely machined mounting surface permiteasy attachment of tooling.
■ Slides are available without a cylinder and supplied with completehardware for mounting standard VDMA/ISO cylinders.
We recommend Series SK & SL Slides.For more information, see PHD’s main catalog.
■ Series SK and SL Slides are provided with Series CV Cylinders (sizes72 - 76 only) which provide the following advantages:
✔ Units specified with the Hushcontrol® Advantageprovide superb speed and deceleration control andenvironmentally friendly noise levels.
✔ Internal shock pads are standard.
✔ Wide range of options.
✔ Optional Rodlok®
✔ See additional benefits in the Series CV catalog.
■ Provisions for 8 mm or 12 mm proximity switches are standard on allunits.
■ Dowel pin holes are standard on housings and tool plates, and areavailable with a variety of optional fits.
■ Units bolt and dowel directly to metric Series SG gantry slideswithout need of a transition plate. (sizes 71-75 only)
31
www.phdinc.com/products/classic • (800) 624-8511
CLAS
SIC0
6
Series T, TS08 Slides
SERIES T
SERIES TS08
For new applicationswe recommend
Series SD/SE & SK/SL Slides.See PHD’s main catalog.
T, TS08
32
ww
w.phdinc.com
/products/classic • (800) 624-8511
CLASSIC06
TS
SIZE03 - 3/8" Shaft04 - 1/2" Shaft06 - 3/4" Shaft
TO ORDER SPECIFY:Three Position Unit, Model, Size,Design No., Slide Travel, Mid-Position Travel,Tool Plate Extension, and Options.
03 1 x 2 x 1 - - M-V
DESIGN NO.
MODELTS - Slide - 150 psi Air max.TH - Slide - 150 psi Hyd. max.TT - Tandem - Air/oil cylinder with 150 psi Air max.
TOOL PLATE EXTENSIONAdditional distance between tool plate andbearing block in 1" increments. Leaveblank if no additional extension is required.
CYLINDER OPTIONS
NOTES:1) Cylinders are Series AV, HV, or TD.2) Port Controls are standard on all models.3) Shock pads available on TS models only.4) -B not available with -A, -L, -N, or -D.5) -N uses shock pads along with the stop collars on the shafts.6) -D not available with -A, -L, -N, -B, or on the TT model.7) Metric versions available. Contact PHD for specifications and literature. See Switches and Sensors
section in PHD’s main catalog forcomplete ordering information.
SLIDE SIZE SIZE NO.030406
PROXIMITY SWITCHMOUNTING BRACKETS
A
SLIDE TRAVEL(1" increments)
03 - 1" to 6"04 - 1" to 8"
06 - 1" to 12"Consult factory forlonger travel lengths.Total slide travel fromretract position 1 toextend position 3.
-31-33-34
H1BDEMV
- Slide with no cylinder supplied- Shock Pads on both ends (TS Models only)- Cushions on both ends (TS Models only)- Magnetic Piston (Hall Effect)- Magnetic Piston (Reed)- Fluoro-Elastomer Seals
OPTIONS- Travel Adjustment on extension and retraction- Crossover with Reservoir plumbed, filled, and bled of air (TT model only)- Close fit dowel pin holes in the tool plate- Normal fit dowel pin holes in the tool plate- Travel Adjustment on retraction- Travel Adjustment on extension- Corrosion resistant guide shafts- Close fit dowel pin holes in the slide body- Normal fit dowel pin holes in the slide body- Crossover tube, unit filled with oil and bled of air (TT Model only)NOTE: See dimension pages for locations and tolerances of dowel pin holes.
AI
J1J2LNQR1R2X
3
THREE POSITION UNIT(specify only if needed)
x 1
MID-POSITION TRAVELSpecify for 3 position units.
Travel from retractposition 1
to mid-position 2.
ORDERING DATA: SERIES T SLIDES3 POSITION DETAIL
RETRACT
MID-POSITION(CYL. 2 TRAVEL)
EXTEND(CYL. 1 TRAVEL)
3 1
2
!Options may affect unit length.See unit dimension and optionspages for adders.
33
ww
w.phdinc.com
/products/classic • (800) 624-8511
CLASSIC06
DIMENSIONS: SERIES T SLIDES
A2.2503.0003.812
AB*4.5005.2507.625
AB27.2508.00012.375
B*2.2502.2503.812
B25.0005.0008.562
C1.0001.5001.750
D3.7504.2505.625
E3.2503.6254.875
F3.8754.3755.750
G.500
1.0001.125
H1.0001.5001.875
J.250.375.250
K2.0002.7503.500
L1.1251.6252.000
M.812
1.1251.500
N1.5002.0003.000
O.750. 8751.125
P.875
1.0001.250
Q#101/4
5/16
R.500.625.875
S1.2501.5002.000
U.875.875.938
V1.0001.5001.875
W2.6253.1254.000
X.375.500.750
Y1/4-20
5/16-183/8-16
Z1/4-20 x .38 DP5/16-18 x .50 DP3/8-16 x .63 DP
AA10-24 x .38 DP1/4-20 x .38 DP5/16-18 x .50 DP
BB1/81/81/4
GG**.375.376.438
HH**.531.687.906
DD**1.8752.3753.125
EE**1.5621.7502.188
B2 + (2 x TRAVEL)AB2 + (2 x TRAVEL)
4X BB NPT
TT0x (TANDEM) SERIES DETAILM
KNJ
HL
.062 4X AA THREAD EACHTHIS SIDE & OPPOSITE SIDE
EE** ±.0005
HH** ±.002
DBOTHENDS
Z THREAD - 2X EACHTHIS SIDE & OPPOSITE SIDE
C
S C
OPTIONAL: 2X CC ± .0005 DIAMETER FOR DOWEL PINFROM OPPOSITE SIDE
CLEARANCE DIAMETER FROM THIS SIDE
4X Y THREAD THRUWITH C'BOREFROM THIS SIDEFOR Q SHCSTx03 .375 DP, Tx04 .625 DP,Tx06 .750 DP
C/2 **RO/2
O
PRETRACTED AB* + TRAVEL
A B* + TRAVEL
U + TRAVEL
V SQ
2X BB NPT
W
2X X SHAFT DIA
Tx03Tx04Tx06
.2509
.3134
.3759
.2520
.3145
.3770
SLIDESERIES
OPTION J2/R2NORMAL FIT
OPTION J1/R1CLOSE FIT
MTG. HOLES: CENTERED ON CENTERLINE OF UNITDOWEL PIN HOLES: ARE OPTIONAL
OPTIONAL CC DOWEL PIN HOLE
6X Y THREAD THRUFROM THIS SIDE C'BOREDFROM OPPOSITE SIDEFOR Q SHCSTx03 .160 DP,Tx04 .187 DP,Tx06 .250 DP
SDD** ± .0005EF
GG** ± .002
G
OPTIONAL:2X CC ± .0005 DIAMETERFOR DOWEL PINCLEARANCE DIAMETERFROM OPPOSITE SIDE
AB36.5627.31211.125
B34.3124.3127.312
Tx03Tx04Tx06
SLIDEMODEL
BORESIZE3/4"
1-1/8"1-3/8"
LETTER DIMENSION
B3 + (CYL 1 TRVL + CYL 2 TRVL)AB3 + (CYL 1 TRVL + CYL 2 TRVL)
3X BB NPT
3 POSITION DETAIL
CYL. 1 CYL. 2
.265(Tx06 Only)
.265(Tx06 Only)
.265(Tx06Only)
* ADD 1/4" FOR EACH SHOCK PAD ADD 1/2" FOR EACH CUSHION ON Tx03 & Tx04 ONLY
**OPTIONAL DOWEL PIN HOLES
Tx03Tx04Tx06
SLIDEMODEL
BORESIZE3/4"
1-1/8"1-3/8"
LETTER DIMENSION
All dimensions are reference only unless specifically toleranced.
34
ww
w.phdinc.com
/products/classic • (800) 624-8511
CLASSIC06
TS
SIZE
08 - 1" Shafts with 2-1/2" Bore Cylinder
TO ORDER SPECIFY:Model, Size, Design No., Slide Travel,Tool Plate Extension, and Options.
08 2 x 2 x 1 - - M-V
DESIGN NO.
OPTIONS- Travel adjustment on extension and retraction- Close fit dowel pin holes in the tool plate- Normal fit dowel pin holes in the tool plate- Travel adjustment on retraction- Travel adjustment on extension- Corrosion resistant Guide Shafts- Close fit dowel pin holes in the Slide body- Normal fit dowel pin holes in the Slide body
MODEL
TS - Slide - 150 psi Air Max.TOOL PLATE EXTENSION
Additional distance between tool plate andbearing block in 1" increments. Leaveblank if no additional extension is required.
CYLINDER OPTIONS
NOTES:1) Cylinder is NFPA 2-1/2" bore MR1 mount.2) -B and -D options are not available together.3) Specify -Y option to order a distributor supplied cylinder. Cylinder is to be an
NFPA 2-1/2" bore “MR1” (Head Male Rabbet mtg.) or “MX3” (Heads Tierodextended mtg.). Dimensions with 5/8" rod, style “SF” Rod End with7/16-20 female thread x .750 deep with 3-3/4" rod extension.(NFPA “MX3” mtg. dim. “W” equals 3-3/4" or dim. “C” and “V” addedtogether equals 3-3/4") dim. taken from front face of the head to the end ofthe rod. If the cylinder has cushions, the adjustment needle must be on theside opposite the port.
4) Shock absorbers cannot be used on units with cushions (-D option)
A
SLIDE TRAVEL(1" increments)
Available in 1" to 24"
BDEMH1VY
- Shock pads on both ends- Cushions on both ends- Magnetic Piston (Hall Effect)- Magnetic Piston (Reed)- Slide with no cylinder supplied- Fluoro-Elastomer Seals- Distributor Supplied cylinder
AJ1J2LNQR1R2
For all Compact Switches, use bracket number 50256.
BRACKET NUMBERDESCRIPTIONPROXIMITY SWITCH MOUNTING BRACKETS
17755-0117755-0217755-03
SHOCK ABSORBERS AND KITS
EXTEND KITRETRACT KITSHOCK ONLY
WITH SHOCKDESCRIPTION195781957911036-002
1958119580
—
WITHOUT SHOCK
NOTE: See dimension pages for locations andtolerances of dowel pin holes.
LIMIT SWITCH WITHOUT CONDUIT (AN12 TYPE)LIMIT SWITCH WITH CONDUIT (AN12 TYPE)LIMIT SWITCH WITHOUT CONDUIT (AB12 TYPE)
ORDERING DATA: SERIES TS08 SLIDES
!Options may affect unit length.See unit dimension and optionspages for adders.
35
ww
w.phdinc.com
/products/classic • (800) 624-8511
CLASSIC06
DIMENSIONS: SERIES TS08 SLIDES
OPTIONAL:2X CC ± .0005 DIAFOR DOWEL PIN x .50 DP
8X 3/8-16 THREAD THRU WITH .315 MINØ THRU THREADS X .625 DP C’BOREDFROM OPPOSITE SIDE FOR 1/4 SHCSW/NARROW WASHER OR 5/16 SHCS.
3.000**
1.5935 ± .002 TODOWEL PIN HOLE
2.500 4X THRU DIA & FOR 3/8 x .625 DP SHCSC'BORED FROM THIS SIDE AND OPPOSITE SIDE
OPTIONAL CC DOWEL PIN HOLE
TS082MODEL
OPTION J2/R2NORMAL FIT
OPTION J1/R1CLOSE FIT
.3759 .3770
6.0008.500 8.250
OPTIONAL TRAVEL ADJUSTMENTON RETRACTION
3/8-16 THREAD x 1.000 DP4X EACH FROM THIS SIDE
OPPOSITE SIDE & BOTH ENDS16X TOTAL
1.875.375
1.125
2.125 RETRACTED8.625* + TRAVEL
1.800 1.500
1.400* + TRAVEL
2.550 OPTIONAL:CC ± .0005 DIA FOR DOWEL PINx .500 DP 2X EACH FROM THIS SIDE& OPPOSITE SIDE
4.000**
1.0935 ± .002TO DOWEL PIN HOLE
3.000SQ 6.187
2X 1/4 NPT
2X 1.000 DIA
4.000
4.000
3/8-16 THREAD x 1.25 DP4X EACH THIS SIDE OPPOSITE SIDE,TOP SIDE & BOTTOM SIDE16X TOTAL
3.5003.000
2.500
.250
.550
1.375 OPTIONAL STROKEADJUST ON EXTEND
2.000 DIA
5.100
*ADD 1/4" FOR EACH SHOCK PAD**OPTIONAL DOWEL PIN HOLES TOLERANCE IS ± .0005MTG. HOLES: CENTERED ON CENTERLINE OF UNITCYLINDER: 2-1/2" BORE
All dimensions are reference only unless specifically toleranced.
36
www.phdinc.com/products/classic • (800) 624-8511
CLASSIC06
Series R Slides
For new applicationswe recommend
Series SD/SE & SK/SL Slides.See PHD’s main catalog.
R
37
ww
w.phdinc.com
/products/classic • (800) 624-8511
CLASSIC06
RS
SIZE03 - 3/8" Shaft04 - 1/2" Shaft06 - 3/4" Shaft08 - 1" Shaft10 - 1-1/4" Shaft12 - 1-1/2" Shaft
TO ORDER SPECIFY:Three Position Unit, Model, Size, Design No.,Slide Travel, Mid-Position Travel, Tool PlateExtension and Options.
06 2 x 2 x 1 - E-VDESIGN NO.MODEL
RS - 150 psi Air Max.RT - Air/Oil Tandem 150 psi Air Max.RH - 150 psi Hyd. Max.(RT and RH not available onsizes 10 and 12.)
TOOL PLATE EXTENSIONAdditional distance between tool plate andbearing block in 1" increments. Leaveblank if no additional extension is required.
SLIDE TRAVEL03 - 1/2" to 2-1/2" in 1/2" increments04 - 1" to 8" in 1" increments06 - 1" to 12" in 1" increments08 - 1" to 20" in 1" increments10 - 1" to 24" in 1" increments12 - 2" to 24" in 1" incrementsConsult factory or distributor for longertravel lengths.Total slide travel from retract position 1to extend position 3.
3 - For Rx03 Slides2 - For all other R Slides
OPTIONS
NOTES:1) Cylinders for sizes 03-08 are Series AV, HV, TD, or A3V, H3V. Cylinders for RS10 and 12 are NFPA MF1 Cylinder.2) Port Controls are standard on all models except RS10 and 12.3) -B and -D cannot be ordered together. -B not available on RH models.4) Shock absorbers cannot be used on units with cushions (-D option).
See Switches and Sensors section inPHD’s main catalog for completeordering information.
SLIDE SIZE BRACKET SIZE NO.030406081012
17500 TYPE PROXIMITY SWITCHMOUNTING BRACKETS
-31-33-34-34-51-51 DESCRIPTION
One kit is required for two switches. Switches are customer supplied12 mm or 18 mm Proximity Switches.
03KIT WITHOUT SWITCH
PROXIMITY SWITCH MOUNTING KITS 12 mm or 18 mm
11034 11035 11035 1115304 & 06 08 10 & 12
DESCRIPTION
Kits must be ordered separately. See Shock and Proximity Switch dimensional information.
04EXTEND KIT WITHOUT SHOCKRETRACT KIT WITHOUT SHOCKSHOCK ONLY
SHOCKS AND KITS
1103712203
11036-001
NOTE: The chart below shows the shortest travel allowedfor shocks to be mounted on the same side of unit.
DESCRIPTIONRS04RS06RS08RS10
5.00"
4.00"
SHORTEST ALLOWABLE TRAVEL
NOTE: See Dimension pages for locations and tolerances ofdowel pin holes.
BDEH1I
J1J2MQR1R2VXY
- Shock Pads on both ends (Series RS only)- Cushions on both ends (Series RS only)- Magnetic Piston (Hall Effect)- Slide with no cylinder supplied- Reservoir assembly plumbed to unit (includes -X Crossover Tube)filled and bled of air- Close fit dowel pin holes in the tool plate- Normal fit dowel pin holes in the tool plate- Magnetic Piston (Reed)- Corrosion resistant guide shafts- Close fit dowel pin holes in the slide body- Normal fit dowel pin holes in the slide body- Fluoro-Elastomer Seals- Crossover tube unit filled with oil and bled of air (RT only)- No cylinder supplied, customer to supply cylinder (only 08, 10, and 12). {NFPA MF1 mounting (08=1-1/2", 10=2", 12=2-1/2" bores) 5/8" rod with 7/16-20 thread}THREE POSITION UNIT
(specify only if needed)sizes 03 to 08 only
3 x 1
MID-POSITION TRAVELSpecify for 3 position units.
Travel from retract position 1to mid-position 2
1116311163
11036-002
121115911160
11036-005
101115511156
11036-005
081103812204
11036-001
06
ORDERING DATA: SERIES R SLIDES3 POSITION DETAIL
RETRACT
MID-POSITION(CYL. 2 TRAVEL)
EXTEND(CYL. 1 TRAVEL)
3 1
2
!Options may affect unit length.See unit dimension and optionspages for adders.
38
ww
w.phdinc.com
/products/classic • (800) 624-8511
CLASSIC06
DIMENSIONS: Rx03 SLIDES
RT03 ( TANDEM ) SERIES DETAIL
OPTIONAL CC DOWEL PIN HOLEOPTION J1/R1
CLOSE FIT.1884
OPTION J2/R2NORMAL FIT
.1895
*ADD 1/4" FOR EACH SHOCK PAD ADD 1/2" FOR EACH CUSHION**OPTIONAL DOWEL PIN HOLES TOLERANCE IS ±.0005***DIMENSIONS ARE NOT AFFECTED BY TRAVEL. MTG HOLES: CENTERED ON CENTERLINE OF UNIT CYLINDER: 3/4" BORE READY STOP NUT: THREAD SIZE IS 3/8-24
SLIDEMODELRx03
3 POSITION DETAIL
5.250* + (2 x TRAVEL)
4X 1/8 NPT
1.250.125
1.000
.500
3.2502.500 **
1.250
1/4-20 THREAD x .38 DP4X EACH FROM THIS
SIDE & OPPOSITE SIDE
2X 1/4-20 THREAD THRUOPTIONAL:2X CC ±.0005 DIAMETER FOR DOWEL PINCLEARANCE DIAMETER FROM OPPOSITE SIDE
1.875 ** 1.250
.250± .0015
2X 1/4-20 THREADTHRU x .200 DPC'BORED FROM OPPOSITESIDE FOR # 10 SHCS
1.500 RETRACTED
1.250
1.188
2.3754.875
.750
.375
7.500***
2.625***2.500* + TRAVEL
2X 1/8 NPT
1.000SQ 2.500
2X .375 SHAFT DIA
OPTIONAL:CC ±.0005 x .25 DP DIAMETER FOR DOWEL PIN2X EACH FROM THIS SIDE AND OPPOSITE SIDE
READY STOP NUT READY STOP NUT
4.312* + ( CYL1 TRVL + CYL 2 TRVL)
3X 1/8 NPT
All dimensions are reference only unless specifically toleranced.
39
ww
w.phdinc.com
/products/classic • (800) 624-8511
CLASSIC06
DIMENSIONS: Rx04 &
Rx06 SLIDES
OPTIONAL CC DOWEL PIN HOLESLIDE
MODELRx04Rx06
OPTION J2/R2NORMAL FIT
.1895
.2520
OPTION J1/R1CLOSE FIT
.1884
.2509
MTG HOLES: CENTERED ON CENTERLINE OF UNITREADY STOP NUT: THREAD SIZE IS 1/2-20
L.062
H
H/2
2X X SHAFT DIAC + TRAVEL
R + TRAVELOPTIONAL:S SLOT x JS ±.001 WIDE FOR DOWEL PIN2X EACH FROM THIS SIDEAND OPPOSITE SIDE
V SQW
2X BB NPT
AATOLERANCE TOSLOT & DOWELHOLE IS ±.0015
B* + TRAVEL
U + TRAVEL
AB* + (2 x TRAVEL)
A + TRAVEL
N
.625K
P RETRACTED
O
0/2
F E M
Z THREAD - 4X EACHTHIS SIDE & OPPOSITE SIDE
OPTIONAL: CC ±.0005 DIAMETER FOR DOWEL PIN2X EACH FROM THIS SIDE AND OPPOSITE SIDE
4X .281 THRU DIA MTG HOLE
OPTIONAL:2X CC ±.0005 DIAMETER FORDOWEL PIN CLEARANCE DIAMETERFROM OPPOSITE SIDE
E D **M
2X Y THREAD THRU FROMTHIS SIDE C'BORED FROMOPPOSITE SIDE FOR Q SHCS
2X Y THREAD THRUK
T **
GTOLERANCE TOSLOT & DOWELHOLE IS ±.0015
READY STOP NUTS
LETTER DIMENSIONSLIDEMODELRx04Rx06
BORESIZE1-1/81-3/8
A4.2504.625
AB*6.5008.685
AB29.250
13.187
B*2.2504.060
B25.0008.562
C3.0003.250
D**2.1252.750
E4.0005.000
F4.5005.750
G.437.500
H1.3751.750
J.1884.2509
T**4.0005.250
S.38 LG x .25 DP.44 LG x .38 DP
JS.1895.2520
K1.2501.625
L1.5001.875
M1.5002.000
N.375.437
O1.0001.125
P1.8752.000
Q1/4 x .260 DP
5/16 x .333 DP
R3.7504.125
U1.2501.625
V1.5001.875
W2.7503.500
X.500.750
Y5/16-183/8-16
Z5/16-18 x .50 DP3/8-16 x .63 DP
AA.625.875
BB1/81/4
* ADD 1/4" FOR EACH SHOCK PAD. ADD 1/4" TO ALL RH04 SERIES UNITSADD 1/2" FOR EACH CUSHION ON Rx04 SERIES UNITS
** OPTIONAL DOWEL PIN HOLES AND SLOTS TOLERANCE DESIGNATED BY LETTERDIMENSION “D” & “T” IS ±.0005
3X BB NPT
AB3* + (2 x CYL 1 TRVL + CYL 2 TRVL)
B3* + (CYL 1 TRVL + CYL 2 TRVL)
3 POSITION DETAIL
SLIDEMODELRx04Rx06
BORESIZE1-1/81-3/8
AB3*8.562
12.200
LETTER DIMENSIONB3*
4.3127.577
4X BB NPT
AB2 + (3 x TRAVEL)
B2 + (2 x TRAVEL)
RTOx ( TANDEM ) SERIES DETAIL
T**
All dimensions are reference only unless specifically toleranced.
40
ww
w.phdinc.com
/products/classic • (800) 624-8511
CLASSIC06
DIMENSIONS: Rx08 &
Rx10 SLIDES
4X 1/4 NPT
AB2 + (3 x TRAVEL)B2 + (2 x TRAVEL)
RTO8 ( TANDEM ) SERIES DETAIL
H
H/2
L.062
OPTIONAL CC DOWEL PIN HOLE
MTG HOLES: CENTERED ON CENTERLINE OF UNITREADY STOP NUT: THREAD SIZE IS 7/8-14
OPTION J1/R1CLOSE FIT
.3759
.3759
OPTION J2/R2NORMAL FIT
.3770
.3770
SLIDESERIESRx08RS10 * ADD 1/4" FOR EACH SHOCK PAD
** OPTIONAL DOWEL PIN HOLES AND SLOTS TOLERANCE DESIGNATED BYLETTER DIMENSION “D” & “T” IS ±.0005
LETTER DIMENSION
3X 1/4 NPT
AB3* + (2 x CYL 1 TRVL + CYL 2 TRVL)B3* + (CYL 1 TRVL + CYL 2 TRVL)
3 POSITION DETAIL (Rx08 only)
2X X SHAFT DIA
V SQ W
AATOLERANCE TO SLOT& DOWEL HOLEIS ±.0015
B* + TRAVELAB* + (2 x TRAVEL)
A + TRAVEL
K
P RETRACTED
O
0/2
F E M
OPTIONAL:2X CC ±.0005 DIAMETER FORDOWEL PIN CLEARANCEDIAMETER FROMOPPOSITE SIDE
E D **
4X 3/8-16 THREAD THRUC'BORED FROM OPPOSITE SIDE FOR5/16 SHCS.333 C'BORE DP
G
K
T **
2X 1/4 NPT
3/8-16 THREAD x .75 DP2X EACH THIS SIDEAND OPPOSITE SIDE
3/8-16 THREAD x .75 DP4X EACH THIS SIDE
& OPPOSITE SIDE
NR
1.375 + TRAVEL
4X .406 THRUDIA MTG HOLE
2X .344 DIAMETER THRUOPTIONAL: 2X CC ±.0005DIAMETER x .43 DP FOR DOWEL PINEACH FROM THIS SIDE AND OPPOSITE SIDE
J + TRAVEL3.625 + TRAVEL
2X .344 DIAMETER THRUOPTIONAL:2X .3770 ±.001 WIDE x .43 DP x .56 LGSLOT FOR 3/8 DOWEL PINEACH FROM THIS SIDEAND OPPOSITE SIDE
READYSTOPNUT
SLIDEMODEL
Rx08RS10
CYL.BORE1-3/8
2
A5.1255.625
AA1.0621.250
AB*9.1889.625
AB213.688
—
B*4.0624.000
B28.625
—
D**3.0004.000
E6.6258.500
F7.3759.250
G1.2501.500
H1.8752.375
J2.3752.125
K2.2502.625
L2.0002.500
M2.0003.000
N.625.750
O1.5001.750
P2.5002.750
R.7501.000
T**6.6258.500
V1.8752.500
W4.5006.000
X1.0001.250
AB3*12.703
—
B3*7.577
—
All dimensions are reference only unless specifically toleranced.
41
ww
w.phdinc.com
/products/classic • (800) 624-8511
CLASSIC06
* ADD 1/4" FOR EACH SHOCK PAD** OPTIONAL DOWEL PIN HOLES AND SLOTS TOLERANCE IS ±.0005MTG HOLES: CENTERED ON CENTERLINE OF UNITCYLINDER: 2-1/2" BOREREADY STOP NUT: THREAD SIZE IS 7/8-14
OPTIONAL CC DOWEL PIN HOLESLIDE
MODELRS12
OPTION J1/R1CLOSE FIT
.3759
OPTION J2/R2NORMAL FIT
.3770
2.000
9.7504.500 **
OPTIONAL:2X CC ±.0005 DIAMETER FORDOWEL PIN CLEARANCE DIAMETERFROM OPPOSITE SIDE
6X 3/8-16 THREAD x 1.000 DPTHRU DIA & C'BORE FROMOPPOSITE SIDE FOR 5/16 SHCSC'BORE .333 DP
1.500TOLERANCE TO SLOT& DOWEL HOLE IS ±.0015
2X 1/4 NPT
3.000SQ
1.125+ TRAVEL
4.125* + TRAVEL
3.000
5.625 + TRAVEL
3.000
1.0001.000
9.750* + (2 x TRAVEL)
1.125
2.250
3.250 RETRACTED
3.250
9.750
10.500
4X 3/8-16 THREAD x .75 DP EACHTHIS SIDE & OPPOSITE SIDE
2X .344 DIA THRUOPTIONAL:
CC ±.0005 x .43 DP2X DIAMETER FOR DOWEL
PIN EACH FROM THISSIDE AND OPPOSITE SIDE
4X .406 THRU DIA MTG HOLE
3.625 + TRAVEL1.625 + TRAVEL
2X .344 DIA THRUOPTIONAL:2X .3770 ±.001 WIDE x .43 DP x .56 LG SLOT FOR DOWEL PINEACH FROM THIS SIDE AND OPPOSITE SIDE
2X 1.500 SHAFT DIA
6.750
9.750 **
3.000.062
2.875
1.438
READY STOP NUT
DIMENSIONS: Rx12 SLIDES
All dimensions are reference only unless specifically toleranced.
42
www.phdinc.com/products/classic • (800) 624-8511
CLASSIC06
TOP VIEWEXTEND KIT THIS ENDRETRACT KIT THIS END
D SHOCKTRAVEL
C THREAD
A B
SHOCKABSORBER11036-00111036-00111036-00511036-00511036-002
CTHD.1-121-121-121-12
11/4-12
BDIM..775.745.751.750
1.312
ADIM.
1.1901.1901.1851.1901.812
SLIDEMODELRx04Rx06Rx08Rx10Rx12
DTRAVEL
SHOCK ABSORBERMOUNTING KITS
EXTEND RETRACT1.0001.0001.0001.0002.000
1103711038111551115911163
1220312204111561116011163
NOTES:1) SHOCK ABSORBERS ARE NOT INCLUDED WITH EXTEND AND
RETRACT MOUNTING KITS2) MOUNTING KITS MAY BE MOUNTED ON EITHER SIDE OF UNIT3) EACH KIT CONTAINS ALL HARDWARE NECESSARY TO MOUNT
KIT TO SLIDE
C THREAD D SHOCKTRAVEL
SIDE VIEW
SERIES RS 12
A B DESCRIPTIONRx04Rx06Rx08Rx10
NOTE: The chart below shows the shortest travel allowed for shocks tobe mounted on the same side of unit.
SHORTEST ALLOWABLE TRAVEL
5.00
4.00
SLIDEMODEL
MOUNTING KIT
110341103511035110351115311153
Rx03Rx04Rx06Rx08Rx10Rx12
NOTES:1) PROXIMITY SWITCHES ARE NOT
PROVIDED BY THE MANUFACTURER2) EACH KIT CONTAINS ALL HARDWARE
NECESSARY TO MOUNT KIT TO SLIDE
1.180
THRU HOLES FOR18 mm OR 12 mmPROXIMITY SWITCHES
PROXIMITY SWITCH BRACKET KIT
1.060
SERIES Rx04,06,08, & 10
SHOCK ABSORBER KITS
KITS: SERIES R SLIDES
All dimensions are reference only unless specifically toleranced.
43
www.phdinc.com/products/classic • (800) 624-8511
CLAS
SIC0
6
Series C Slides
C
For new applicationswe recommend
Series SM and SFP.See PHD’s main catalog.
44
ww
w.phdinc.com
/products/classic • (800) 624-8511
CLASSIC06
CB 04 1 xU
TO ORDER SPECIFY:Model, Shaft Designation, Size, Design No., and Slide Travel.
24
DESIGN NO.
MODELCA - Magnetic Slide with 110 psi to uncoupleCB - Magnetic Slide with 150 psi to uncouple
SLIDE TRAVEL(in 1" increments)
03 - 1" to 16"04 - 1" to 24"06 - 1" to 36"
SHAFT DESIGNATION
SIZE
03 - 3/8" Shaft04 - 1/2" Shaft06 - 3/4" Shaft
U - Plain Shaft
12 mm PROXIMITY SWITCH AND NUT (2 REQUIRED)15561-001 DC 24 Volts - Sink - (NPN)15561-002 DC 24 Volts - Source - (PNP)15561-003 AC 117 VAC
* Kit includes nylon shock button
03SHOCK & LOCK-NUT
SHOCK KITS
11036-012 16913-002 16913-00304 * 06 *DESCRIPTION
- Q
OPTIONQ - Corrosion resistant guide shafts
ORDERING DATA: SERIES C SLIDES
45
ww
w.phdinc.com
/products/classic • (800) 624-8511
CLASSIC06
DIMENSIONS: SERIES C M
AGNETICALLY COUPLED SLIDES
MTG. HOLES: CENTERED ON DESIGNATED CENTERLINES OF UNITCxx031: 10-32 BARB FITTINGS ARE SUPPLIED WITH UNIT
LETTER DIMENSION
CL
CL
CL
BB PORTBOTHENDS
CC THREAD THRU FOROPTIONAL SHOCK ABSORBERSBOTH ENDS
F
.50 DIA THRU FOR OPTIONAL12 mm PROXIMITY SWITCH
BOTH ENDS
AA
S
H
JL
W
O
KBOTH ENDS
2X X SHAFT DIA
Y THREAD ON OPPOSITE SIDETHRU DIA AND C'BORE FOR QSHCS 2X EACH END
4X THRU DIA AND C'BORE FROMOPPOSITE SIDE FOR U SHCS
TBOTHENDS
VBOTHENDS
G TO SHAFT
N
C + TRAVEL
E
P AT END OF TRAVEL
M
B
A + TRAVEL
Z
4X R THREAD
MD
.905MAX
TRAVEL ADJUSTMENT+ .030 / - .500
BOTH ENDS
.157 MINBOTH ENDS
Cxx031
Cxx041
Cxx061
SLIDEMODEL
3/8
3/4
1-1/8
BORESIZE A
4.750
6.375
7.875
B
3.375
4.750
6.000
C
4.250
5.750
7.125
D
3.625
5.000
6.250
E
3.125
4.500
5.750
F
2.750
4.000
5.250
G
.500
.688
.875
H
1.688
2.250
3.000
J
.062
.125
.125
K
.500
.625
.750
L
1.656
2.250
3.000
M
1.750
2.000
2.250
N
2.875
4.125
5.250
O
.250
.312
.375
P
.688
.812
.938
R
10-24 x .37 DP
1/4-20 x .50 DP
5/16-18 x .75 DP
S
.375
.500
.625
T
1.000
1.500
2.000
V
1.375
1.938
2.625
W
1.875
2.750
3.500
X
.375
.500
.750
1/4-20 x .50 DP
5/16-18 x .75 DP
3/8-16 x 1.00 DP
Y Z
2.688
3.938
5.188
AA
.594
.875
1.000
BB
10-32
1/8
1/8
CC
1/2-20
3/4-16
1-12
Q
#10 x .210 DP
1/4 x .275 DP
5/16 x .338 DP
U
#8 x .199 DP
#10 x .215 DP
1/4 x .275 DP
All dimensions are reference only unless specifically toleranced.
46
www.phdinc.com/products/classic • (800) 624-8511
CLASSIC06
We recommend Series SG Slides.For more information, see PHD’s main catalog.
BENEFITS■ Series SG Slides are available in six sizes with travels to
36 inches or 900 mm to cover a wide range of saddle slideapplications.
■ The slide saddle contains four bushings which ride on twohardened, precision ground shafts providing smooth, preciselinear motion.
■ Series SG Slides can be equipped with either linear ballbushings or TC fluoropolymer composite bushings to provideoptimum performance with minimum slide deflection for alltypes of applications.
■ Oversize guide shafts are available on units with TC bushingsfor maximum rigidity and minimum deflection.
■ Both linear ball bushings and TC bushings have internallubrication for maximum life.
■ Linear ball bushings provide the lowest friction for lowbreakaway and come standard with shaft seals for protectionfrom external contamination.
■ The anodized aluminum alloy saddle is supplied withthreaded and counterbored holes for easy mounting of toolingand fixturing.
■ Series SG Slides are available with oversize PHD Cylinders formaximum force and long cylinder life.
■ Series SG Slides are available in both metric and imperialversions allowing flexibility in design for a world market.
■ Metric units can be specified as “ISO cylinder ready” providing aslide with all hardware to mount standard VDMA/6432 ISOcylinders.
■ All bushings, seals, shafts, and cylinder components are easilyreplaced for extended unit life.
■ Options include shock absorbers, cushions, shock pads,proximity switches, and corrosion-resistant shafts, allowing theslide to be specified for a wide variety of applicationrequirements.
■ Built-in standard travel adjustments provide easy precisepositioning of the end-of-travel positions.
47
www.phdinc.com/products/classic • (800) 624-8511
CLAS
SIC0
6
For new applicationswe recommend
Series SG or SFP Slides.See PHD’s main catalog.
Series B Slides
B
48
ww
w.phdinc.com
/products/classic • (800) 624-8511
CLASSIC06
BS
SIZE03 - 3/8" Dia. Shaft04 - 1/2" Dia.Shaft06 - 3/4" Dia. Shaft08 - 1" Dia. Shaft10 - 1-1/4" Dia. Shaft12 - 1-1/2" Dia. Shaft
TO ORDER SPECIFY:Three Position Unit, Model, Size, Design No.,Slide Travel, Mid-Position Travel, and Options.
08 1 x 12 - D-E
DESIGN NO.MODELBS - Slide - 150 psi Air max.BT - Tandem - Air/oil cylinder 150 psi Air max. (not available on size 10 or 12)BH - Slide - 150 psi Hyd. max. (not available on size 10 or 12)
NOTES:1) Port Controls are standard on sizes 03 through 08.2) Shock pads are available on Series BS only.3) Options -B and -D are not available together.4) One shock and lock-nut are required for each direction. One Shock Stop. block kit is required for both directions. (For sizes 10 and 12, one shock and shock block kit is required for each direction.)5) -Y cylinder is to be: 08 - NFPA 1-1/2" bore with MF1 mtg., 5/8" rod, style SF rod end with 7/16-20 female thread x .750 DP 10 - NFPA 2" bore with MF1 mtg., 5/8" rod, style SF rod end with 7/16-20 female thread x .750 DP 12 - NFPA 2-1/2" bore with MF1 mtg., 5/8" rod, style SF rod end with 7/16-20 female thread x .750 DP6) Cylinder support kit is recommended for travels longer than 36".7) Metric versions available. Contact PHD for specifications and literature.
SLIDE TRAVEL(in 1" increments)
03 - 1" to 12"04 - 1" to 16"06 - 1" to 24"08 - 1" to 36"10 - 1" to 48"12 - 1" to 60"
Total slide travel fromretract position 1 toextend position 3.
See Switches and Sensors section inPHD’s main catalog for completeordering information.
SLIDE SIZE BRACKET SIZE NO.030406081012
PROXIMITY SWITCHMOUNTING BRACKETS
-31-33-34-34-51-51
CYLINDER OPTIONSB
DEH1I
MQVX
Y
- Shock Pads on both ends (not available on BT or BH Models)- Cushions on both ends- Magnetic Piston (Hall Effect)- Slide with no cylinder supplied- Reservoir assembly plumbed to unit filled with oil and bled of air (includes -X Crossover Tube)(BT models only)- Magnetic Piston (Reed)- Corrosion resistant guide shafts- Fluoro-Elastomer Seals- Crossover tube, unit filled with oil and bled of air (Series BT only) (not available on size 10 or 12)- No cylinder supplied, distributor to supply cylinder to PHD (Series BS only) (not available on size 03-06)
See Kit section for dimensional information and Part No.
03SHOCK & LOCK-NUTSHOCK STOP BLOCK KITBOTH SHOCKS, NUTS, & KIT
SHOCK KITS
11036-0031378513789
11036-0051235412360
11036-0051235612362
11036-0051235612362
04 06 08DESCRIPTION
10SHOCK & LOCK-NUTSHOCK STOP BLOCK KITSHOCK & SHOCK BLOCK KITCYLINDER SUPPORT KIT
11036-002137991380013823
11036-010138011380213824
12DESCRIPTION
THREE POSITION UNIT(specify only if needed)
sizes 03-08 only
3 x 1
MID-POSITION TRAVELSpecify for 3 position unit.
Travel from retractposition 1 to mid-position 2.
ORDERING DATA: SERIES B SLIDES3 POSITION DETAIL
(Bx03 to Bx08)
RETRACT
MID-POSITION(CYL. 2 TRAVEL)
EXTEND(CYL. 1 TRAVEL)
3 1
2
!Options may affect unit length.See unit dimension and optionspages for adders.
49
ww
w.phdinc.com
/products/classic • (800) 624-8511
CLASSIC06
DIMENSIONS: SERIES Bx03, Bx04, Bx06 &
Bx08 SLIDES
*ADD 1/4" FOR EACH SHOCK PAD, ADD 1/2" FOR EACH CUSHION ON Bx03 & Bx04 SERIES ONLY
Bx03Bx04Bx06Bx08
SLIDESERIES
CYL.BORE3/4"
1-1/8"1-3/8"1-3/8"
A6.1257.2509.500
11.250
FF.375.500.750.875
EE1.2801.6862.3432.686
DD.198.260.322.385
CC3/4-161-121-121-12
BB1/81/81/41/4
AA.687
1.0001.0001.000
Y10-24 x .50 DP1/4-20 x .62 DP
5/16-18 x .75 DP3/8-16 x .75 DP
X.375.500.750
1.000
W2.7503.6255.0005.750
U**3/161/45/163/8
V1.0001.5001.8751.875
T3.6254.7506.2507.500
S***2.0002.6253.5004.000
R.250.375.500.375
P.9381.0001.2501.250
O.438.500.625.750
N***3.0004.0005.5007.000
M1.5002.0003.0003.500
L1.1251.7502.1252.125
K.8751.0001.2501.500
J.062.062.125.062
H1.1881.8122.1252.188
G.688.9381.1881.188
F5.0006.6258.2509.750
E2.0622.7503.5004.250
D4.0005.0006.7508.000
C5.2506.2508.2509.750
B25.2505.2508.8758.875
B*2.5002.5004.3754.375
GG1.3751.8122.5002.875
Q**1/4 x .3125/16 x .3383/8 x .4007/16 x .500
Z#6 x .500 DP
#10 x .190 DP1/4 x .270 DP5/16 x .313 DP
HG
J L
3 POSITION DETAIL BTOx ( TANDEM ) SERIES DETAIL
B2 + ( 2 x TRAVEL)
4X BB NPT
B34.5624.5627.6257.625
AA MAX1/2 TRAVEL ADJUSTMENT
D SQ
2X DIA FOR U DOWELPIN x R DP
WV SQ
O
KBOTH ENDS
2X BB NPT
1/2 TRAVELADJUSTMENT
2X X SHAFT DIA4X Y THREAD FROM THISSIDE C'BORED FROM OPPOSITESIDE FOR Z SHCS
GG ± .002
THRU DIA AND C'BORE FOR QSHCS 2X EACH END**
DIA FOR U DOWEL PIN FROMOPPOSITE SIDE CLEARANCE DIA FROM
THIS SIDE 2X EACH END
TBOTHENDS
S***BOTHENDS
2X M
FF ± .002
N***
C + TRAVEL
E
O
P WITH CYLINDER INEXTENDED POSITION
A + TRAVEL B* + TRAVEL
CC THREAD THRU FOROPTIONAL SHOCK ABSORBERSBOTH ENDS
F
U ± .001 x DD DP SLOTFOR DOWEL PIN
BOTH ENDS**
EE ± .002
***DOWEL PIN HOLES: TOLERANCE BETWEEN DOWEL PIN HOLES DESIGNATED BY LETTER DIMENSION “S” & “N” IS ±.001MTG. HOLES: CENTERED ON CENTERLINE OF CYLINDER
**DOWEL PIN HOLES ARE INTENDED FOR USE WITH THE DOWEL PIN SLOT ON THEOPPOSITE END. SLIDE LENGTH TOLERANCES DO NOT PERMIT THE USE OF THEDOWEL PIN HOLES IN EACH END FOR PRECISE LOCATION. TOLERANCE BETWEENCENTERLINE OF DOWEL SLOT AND CENTERLINE OF DOWEL HOLE IS ±.002
B3 + (TRVL CYL 1 + TRVL CYL 2)
3X BB NPT
.265(06 & 08 ONLY)
.265(06 & 08ONLY)
.265(06 & 08ONLY)
LETTER DIMENSION
All dimensions are reference only unless specifically toleranced.
50
ww
w.phdinc.com
/products/classic • (800) 624-8511
CLASSIC06
DIMENSIONS: SERIES Bx10 &
Bx12 SLIDES
*ADD 1/4" FOR EACH SHOCK PAD
HG
.125 L
1.281 MAX1/2 TRAVEL ADJUSTMENT
D SQ
4X DIA FOR 3/8DOWEL PIN x .37 DP
WV SQ
OKBOTH ENDS
2X 1/4 NPT
1/2 TRAVELADJUSTMENT
2X X SHAFT DIA
1/2 -13 THREAD x 1.375 DPFROM THIS SIDE12X C'BORED FROMOPPOSITE SIDE FOR 3/8 SHCSC'BORE: BS10 .500 DP, BS12 .500 DP
GG ± .002
THRU DIA AND C'BORE FOR QSHCS 2X EACH END**
DIA FOR 3/8 DOWEL FROMOPPOSITE SIDE CLEARANCE DIA
FROM THIS SIDE 2X EACH END
TBOTHENDS
S***BOTHENDS
M
FF ± .002
N***
C ± .030 + TRAVEL
E
O
P WITH CYLINDER INEXTENDED POSITION
A + TRAVEL B* + TRAVEL
CC THREAD THRU FOROPTIONAL SHOCK ABSORBERSBOTH ENDS
F
.3770 ± .001 x .385 DPSLOT FOR DOWEL PIN
BOTH ENDS**
EE ± .002
M
N***
HH ± .002TO DOWELPIN HOLE
AA
OPTIONAL CYLINDER SUPPORT BRACKETC'BORED THRU DIA FOR A 5/16
SHCS
.937.312
***DOWEL PIN HOLES: TOLERANCE BETWEEN DOWEL PIN HOLES DESIGNATED BYLETTER DIMENSION “S” & “N” IS ±.001MTG. HOLES: CENTERED ON CENTERLINE OF CYLINDER
**DOWEL PIN HOLES ARE INTENDED FOR USE WITH THE DOWEL PIN SLOT ON THEOPPOSITE END. SLIDE LENGTH TOLERANCES DO NOT PERMIT THE USE OF THEDOWEL PIN HOLES IN EACH END FOR PRECISE LOCATION. TOLERANCE BETWEENCENTERLINE OF DOWEL SLOT AND CENTERLINE OF DOWEL HOLE IS ±.002
LETTER DIMENSION
BS10BS12
SLIDESERIES
CYL.BORE
2"2-1/2"
A13.87516.875
B*4.0004.125
C12.12514.625
D10.00012.000
E5.1256.125
F12.00014.750
G1.5001.750
H2.7503.250
K1.7502.250
L2.7503.250
M3.5005.000
N***9.00011.000
O.8751.125
P1.4371.687
S***4.5005.500
T9.00010.750
V2.5003.000
W6.5008.000
X1.2501.500
AA1.0001.250
CC1-1/4-121-3/4-12
EE3.0623.812
FF1.0001.250
GG3.2504.000
HH7.7509.500
Q**5/8 x .645 DP3/4 x .770 DP
All dimensions are reference only unless specifically toleranced.
51
www.phdinc.com/products/classic • (800) 624-8511
CLAS
SIC0
6
D SHOCKTRAVEL
C THREAD
A MAX
SERIES BS 10 & 12
C THREAD
D SHOCKTRAVEL A MAX
SERIES Bx03,04,06, & 08 CTHD.
3/4-161-121-121-12
11/4-1213/4-12
ADIM.
1.2502.0901.840.965
3.3753.125
DTRAVEL
.5001.0001.0001.0002.0002.000
137891236012362123621380013802
COMPLETESHOCK
KITSHOCK
ABSORBER11036-00311036-00511036-00511036-00511036-00211036-010
137851235412356123561379913801
STOP BLOCKKIT
SLIDEMODELBx03Bx04Bx06Bx08BS10BS12
SHOCK ABSORBER KITSSHOCK KIT PARTS
1) A COMPLETE SHOCK KIT CONTAINS THE FOLLOWING:2 - SHOCK ABSORBERS2 - LOCK NUTS ( WHEN REQ'D )1 - STOP BLOCK KIT
2) BS 10 & BS 12 UNITS CONTAIN 1 OF EACH ITEM ANDWILL REQUIRE 1 KIT FOR EACH DIRECTION
NOTES:
SHOCK ABSORBER KITSSERIES B SLIDES
KITS: SERIES B SLIDES
SLIDEMODEL
LETTER DIMENSIONKIT N0THRU HOLES THREADED
BS10BS12
1379413798
14452-1-0014453-1-00
.750
THRU HOLE PLATE
2X THRU DIA FOR3/8 DOWEL PIN
8X THRU DIA & C'BOREFOR 1/2 SHCS
ADE
EA
A/2
NOTES:1) EACH KIT CONTAINS 1 MTG PLATE, 2 DOWEL PINS, & REQUIRED
MTG SCREWS2) DOWEL PINS ARE A PRESS FIT INTO MTG PLATE AND A
CLEARANCE FIT INTO SLIDE SADDLE
SADDLE MOUNTING PLATESERIES Bx10 - Bx12 SLIDES
.750
A
A/2
2X THRU DIA FOR3/8 DOWEL PIN
E
8X 3/8-16 THREAD THRU
ADE
THREADED HOLE PLATE
C
THRU HOLE PLATE
A4.0005.0006.7508.000
C.500.500.625.625
D3.0004.0005.5007.000
E1.5002.0003.0003.500
F3/16 1/45/16 3/8
G# 10 1/45/16 3/8
H 8-3210-241/4-205/16-18
SLIDEMODEL
LETTER DIMENSIONKIT N0THRU HOLES THREADED
Bx03Bx04Bx06Bx08
13790123481234912350
14451-1-0012558-1-0012568-1-0012581-1-00
2X THRU HOLEFOR F DOWEL PIN
4X THRU DIA & C'BOREFOR G SHCS
E
AD
A
A/2
SADDLE MOUNTING PLATESERIES Bx03 - Bx08 SLIDES
NOTES:1) EACH KIT CONTAINS 1 MTG PLATE, 2 DOWEL PINS, &
REQUIRED MTG SCREWS2) DOWEL PINS ARE A PRESS FIT INTO MTG PLATE AND A
CLEARANCE FIT INTO SLIDE SADDLE
CD
E
A
A
A/2
2X THRU HOLEFOR F DOWEL PIN
4X H THREAD THRU
THREADED HOLE PLATE
A10.00012.000
E3.5005.000
D 9.00011.000
52
www.phdinc.com/products/classic • (800) 624-8511
CLASSIC06
Series M Slides
M
For new applicationswe recommend
Series SM Slides.See PHD’s main catalog.
53
ww
w.phdinc.com
/products/classic • (800) 624-8511
CLASSIC06
MS
SIZE02 - 1/4" Dia. Shafts
(MS Model only)03 - 5/16" Dia. Shafts04 - 1/2" Dia. Shafts06 - 3/4" Dia. Shafts
TO ORDER SPECIFY:Model, Size, Design No., Travel,and Options.
04 2 x 2 - E-V
DESIGN NO.MODELMS - Air Slide - 150 psi Air max.MT - Air powered, hyd. controlled Slide - 150 psi Air max.
OPTIONS
NOTES:1) Travel adjustments are standard on all Series MS and MT Slides.
02 - 3/4" of adjustment on each end03-06 - 1" of adjustment on each end
2) 02 size is available in Series MS only.3) For PHD Proximity Switches, see Switches and Sensors section
of PHD’s main catalog. Switches and brackets must beordered separately.
One kit is required for each switch.See next page for dimensional information.
PART NO. INDIVIDUAL SWITCH BRACKET13591 1750 Switch Mx03 thru Mx0611796 1590 Switch Mx03 thru Mx06
SWITCH BRACKET KIT
CE
F
I
M
V
- Ports on rod ends (Series MS only)- Magnetic Piston (Hall Effect) (not available on size 02)- Unit filled with oil and bled of air (MT Series only)- Reservoir assembly plumbed to unit filled and bled of air- Magnetic Piston (Reed) (not available on size 02)- Fluoro-Elastomer Seals
TRAVELSIZE AVAILABLE LENGTHS 02 - 1-1/2" or 3" 03 - 2" or 4" 04 - 2" or 4" 06 - 4" or 6"
ORDERING DATA: SERIES M SLIDES
54
ww
w.phdinc.com
/products/classic • (800) 624-8511
CLASSIC06
MTG. HOLES: CENTERED ON CENTERLINE OF UNIT10-32 PORTS: BARB FITTINGS ARE SUPPLIED WITH UNIT**DOWEL PIN HOLES: TOLERANCE BETWEEN DOWEL PINS DESIGNATED
BY LETTER DIMENSION "S" & "N" IS ±.001
CC
.630
.640
.740
.920
BB
10-32
1/8
1/8
1/8
Z
8-32 x .28 DP
10-24 x .33 DP
1/4-20 x .40 DP
5/16-18 x .50 DP
Y
.250
.354
.429
.446
X
.250
.312
.500
.750
W
.750
1.000
1.375
1.875
V
.600
.880
1.160
1.250
U
1/8 x .20 DP
3/16 x .25 DP
1/4 x .30 DP
5/16 x .37 DP
T
1.620
2.062
2.750
3.750
S**
.750
1.000
1.375
1.875
R
1/8 x .18 DP
3/16 x .20 DP
1/4 x .40 DP
5/16 x .56 DP
P
.210
.338
.273
1.023
O
.165
.225
.290
.340
N**
2.435
3.250
3.500
5.500
M
1.562
2.000
2.688
3.750
L
.820
1.130
1.450
1.700
K
.330
.450
.580
.680
J
.088
.075
.070
.070
H
.800
1.155
1.460
1.700
G
.450
.630
.730
.920
F
2.120
2.620
3.420
4.500
E
1.140
1.500
2.000
2.750
D
1.960
2.460
3.250
4.340
C
2.060
2.616
2.996
3.504
B
1.560
2.000
2.250
2.650
A
2.390
3.066
3.576
4.184
BORESIZE
1/2
3/4
1
1-3/8
MS02
MS03
MS04
MS06
LETTER DIMENSIONFF
.1260 x .12 DP
.1890 x .19 DP
.2510 x .25 DP
.3135 x .31 DP
EE
3/4"
1"
1"
1"
SLIDEMODEL ZB
8-32 x .25 DP
10-24 x .28 DP
1/4-20 x .38 DP
5/16-18 x .50 DP
AA
10-32
10-32
1/8
1/8
Q
#8 x .190 DP
#10 x .225 DP
1/4 x .360 DP
5/16 x .400 DP
HH.087
.101
.132
.166
SLIDEMODELMS02
MS03
MS04
MS06
GG1/4-28
5/16-24
3/8-24
1/2-20
VBOTHENDS
HG
J L
.998MAX
.062 BOTH ENDS
EE LONG TRAVEL ADJUSTMENTX GG THREAD BOTH ENDS
W
2X X SHAFT DIA
4X ZB THREAD
2X DIA FOR R DOWEL PIN
2X M
THRU DIA AND C'BOREFOR Q SHCS
2X EACH END
TBOTHENDS
DF
O N**
(TRAVEL/2) - P
B + TRAVEL
C + (2 x TRAVEL)A + (2 x TRAVEL)
Y
KBOTH ENDS
S **E
BOTHENDS
2X DIA FORU DOWEL PIN
2X Z THREADEACH END
FF WIDE SLOTTHIS END ONLY
2X BB PORTCCTYP
OPTIONAL:AA PORT LOCATIONSPECIFIED BY -C WHEN ORDERINGREPLACES BB PORTS
HH
DIMENSIONS: SERIES M
S
All dimensions are reference only unless specifically toleranced.
55
ww
w.phdinc.com
/products/classic • (800) 624-8511
CLASSIC06
N**
MTG. HOLES: CENTERED ON CENTERLINE OF UNIT10-32 PORTS: BARB FITTINGS ARE SUPPLIED WITH UNIT**DOWEL PIN HOLES: TOLERANCE BETWEEN DOWEL PINS DESIGNATED BY LETTER DIMENSION "S" & "N" IS ±.001
SEE NEXT PAGE FOR SWITCH BRACKET OPTION DIMENSIONS
HG
J L
.998MAX
VBOTHENDS
.062 MINBOTH ENDS
1" TRAVEL ADJUSTMENTX GG THREAD BOTH ENDS
TANDEM COUPLINGWITH 1/8 NPT
MTO3 UNITS ONLY
1.941
W
2X X SHAFT DIA
4X ZB THREAD
2X DIA FOR RDOWEL PIN
2X M
THRU DIA AND C'BOREFOR Q SHCS
2X EACH END
TBOTHENDSD
F
AA PORTBOTH ENDS O
.500
(TRAVEL/2) - P
B + TRAVEL
C + (2 x TRAVEL)A + (2 x TRAVEL)
Y
KBOTH ENDS
S **E
BOTHENDS
2X DIA FORU DOWEL PIN
Z THREAD2X EACH END
FF WIDE SLOTTHIS END ONLY
BORESIZE
3/4
1
1-3/8
MT03
MT04
MT06
LETTER DIMENSIONSLIDEMODEL A
3.066
3.576
4.184
B
2.000
2.250
2.650
C
2.616
2.996
3.504
D
2.460
3.250
4.340
E
1.500
2.000
2.750
F
2.620
3.420
4.500
G
.630
.730
.920
H
1.155
1.460
1.700
J
.075
.070
.070
K
.450
.580
.680
L
1.130
1.450
1.700
M
2.000
2.688
3.750
N**
3.250
3.500
5.500
O
.225
.290
.340
P
.338
.273
1.023
#10 x .225 DP
1/4 x .360 DP
5/16 x .400 DP
Q R
3/16 x .20 DP
1/4 x .40 DP
5/16 x .56 DP
S**
1.000
1.375
1.875
T
2.062
2.750
3.750
U
3/16 x .25 DP
1/4 x .30 DP
5/16 x .37 DP
V
.880
1.160
1.250
W
1.000
1.375
1.875
X
.312
.500
.750
Y
.354
.429
.446
Z
10-24 x .33 DP
1/4-20 x .40 DP
5/16-18 x .50 DP
ZB
10-24 x .28 DP
1/4-20 x .38 DP
5/16-18 x .50 DP
AA
10-32
1/8
1/8
FF
.1890 x .19 DP
.2510 x .25 DP
.3135 x .31 DP
SLIDEMODELMS02
MS03
MS04
MS06
GG1/4-28
5/16-24
3/8-24
1/2-20
DIMENSIONS: SERIES M
T
All dimensions are reference only unless specifically toleranced.
56
www.phdinc.com/products/classic • (800) 624-8511
CLASSIC06
KITS: SERIES M SLIDES
SLIDEMODEL
Mx03 NOTES:1) SWITCHES ARE NOT PROVIDED
WITH BRACKET KIT2) EACH KIT CONTAINS 1 BRACKET
WITH 2 BUTTON HEAD CAPSCREWS
3) BRACKET MAY BE ADJUSTEDALONG LENGTH OF SLIDESADDLE
SLIDESTROKE (in) A
Mx04
Mx06
2
4
2
4
4
6
.162
.037
0.0
.162
0.0
.237
.540
.570.450
.1751.000
A MINSERIES 1750 SWITCHBRACKET KIT #13591
All dimensions are reference only unless specifically toleranced.
SERIES 1590 PROXIMITYSWITCH BRACKET KIT #11796
NOTES;1) PROXIMITY SWITCHES
ARE NOT PROVIDEDWITH BRACKET KIT
2) EACH KIT WILL CONTAIN 1BRACKET WITH 2 SOCKETHEAD CAP SCREWS
3) BRACKET MAY BEADJUSTED ALONG LENGTHOF SLIDE SADDLE IN3/8" INCREMENTS
242446
.282
.157
.032
.282
.107
.357
Mx03
Mx04
Mx06
A SLIDE
STROKE (in) SLIDEMODEL
.570.750
.545.285
.700
A MIN1.187
J8-3210-241/4-205/16-18
H1/83/161/45/16
G.7501.0001.3751.875
F1.6202.0602.7503.750
E.312.375.500.500
D2.0002.5003.5005.000
C5.0606.6207.00011.500
B8.06010.62011.00015.500
A8.41011.07011.68016.200
D
D/2
END BLOCK REF 6X THRU HOLEFOR H DOWEL PIN
8X J THREAD THRU
E
G F
CBA
LETTER DIMENSIONKIT NO.
SLIDEMODELMx02Mx03Mx04Mx06
11687-1-00011746-1-00011757-1-00011771-1-000
NOTES:1) EACH END BLOCK MTG KIT WILL CONTAIN 1
MOUNTING PLATE AS SHOWN, 4 MTG SCREWS,AND 3 DOWEL PINS
2) DOWEL PINS ARE A PRESS FIT INTO MTG PLATE3) DIMENSION “B” REPRESENTS MTG PATTERN OF
LONGEST AVAILABLE STROKE IN EACH SERIES4) DIMENSION “C” REPRESENTS MTG PATTERN OF
SHORTEST AVAILABLE STROKE IN EACH SERIES
END BLOCKMTG. PLATE
E
AD
B
B/2
2X THRU HOLE FOR FDOWEL PIN
4X THRU DIA& C'BORE FOR G SHCS
SADDLE MOUNTING PLATE
C
LETTER DIMENSIONA B C D E F G
SLIDEMODEL KIT NO.
MS02MS03MS04MS06
11792-1-00011793-1-00011794-1-00011795-1-000
3.0004.0004.2506.650
1.9602.4603.2504.340
.312
.375
.500
.500
2.4353.2503.5005.500
1.5622.0002.6883.750
1/83/16 1/45/16
# 8# 10 1/45/16
NOTES:1) EACH KIT WILL CONTAIN 1 MTG PLATE, 2 DOWEL PINS, AND 4 SHCS2) DOWEL PINS ARE A PRESS FIT INTO MTG PLATE
SERIES 1750 COMPACT REED AND HALLSWITCH BRACKET KIT
The bracket kit number is 13591. Using this bracket kit alongwith the compact switches reduces the size of the slide package.The slides must be ordered with the proper magnetic option for theswitches to function. See Switches and Sensors section of PHD’smain catalog for switch details.
BRACKET KIT NUMBER 135911750 COMPACTPROXIMITYSWITCH
57
www.phdinc.com/products/classic • (800) 624-8511
CLAS
SIC0
6
Series SGxM Slides
SGxM
For new applicationswe recommend
Series SM or SFP.See PHD’s main catalog.
58
ww
w.phdinc.com
/products/classic • (800) 624-8511
CLASSIC06
ORDERING DATA: SERIES SG SLIDES WITH RODLESS CYLINDER
TO ORDER SPECIFY:Product, Series, Type, Cylinder Option,Design No., Size, Travel, and Options.
NOTES:1) All units are shock absorber ready as standard. Shock
absorber kits are ordered separately. See Slides sectionof PHD’s main catalog for complete orderinginformation.
2) Shock absorbers are not plated with -Z1 option.3) SGxM cylinder section comes standard with cushions
and magnetic piston on both ends.4) Option -CB provides targets for use with 8 mm barrel
proximity switches.5) Option -BB and -BR are not available together with
shock absorbers.
x –
DESIGN NO.3 - Imperial7 - Metric
3 3 6 BB – Q1 – Z1
SLIDE OPTIONSBB - Shock Pad both directionsBE - Shock Pad on extensionBR - Shock Pad on retractionCB - Proximity Switch ready both ends (See Note 4)GY - Saddle mounting in position 1
(Not available on size 3 slide)L6 - Lube fitting in saddle in position 3Q1 - Corrosion-resistant guide shafts (ends unplated)Z1 - Electroless nickel plated ferrous metal parts
TYPEB - Standard linear
ball bushing,standard shaft
C - TC bushing,standard shaft
D - TC bushing,oversize shaft
PRODUCTS - Slide
GS B
SERIESG - Gantry
CYLINDER OPTIONM - Rodless cylinder mounted
M
SLIDE TRAVEL (in)SIZE IMPERIAL UNITS33 1 to 1634 1 to 2035 1 to 2436 1 to 36
Available in1/4" increments.
SLIDE TRAVEL [mm]SIZE METRIC UNITS73 25 to 40574 25 to 51065 25 to 61066 25 to 915
Available in5 mm increments.
SIZE3 - 25 mm rodless cylinder with 12 mm
shaft standard, 16 mm shaft oversize4 - 25 mm rodless cylinder with 16 mm
shaft standard, 20 mm shaft oversize5 - 32 mm rodless cylinder with 20 mm
shaft standard, 25 mm shaft oversize6 - 40 mm rodless cylinder with 25 mm
shaft standard, 30 mm shaft oversize
SHOCK ABSORBER KITS (See Note 1)SHOCK ABS. NO.
57858-01-x57858-02-x
SLIDE MODELSGxMx3
SGxMx4, SGxMx5, SGxMx6
H39–
59
www.phdinc.com/products/classic • (800) 624-8511
CLAS
SIC0
6
DIMENSIONS: SERIES SG SLIDES WITH RODLESS CYLINDER
All dimensions are reference only unless specifically toleranced.
EE
B + TRAVEL
HH
GGII
A + TRAVELMM
MM
OOCL
NN
4X THRU Ø & COUNTERBOREFOR S SHCS
J
JJG
L
4X T THREAD THIS SIDE,COUNTERBORE FROM THE
OPPOSITE SIDE FORQ SHCS
R
E*
FP
M
O
2X Ø X1 SHAFT FORSGB & SGC UNITS
2X Ø X2 SHAFT FORSGD UNIT
C + TRAVEL
N
D
1/2 [12.7] MAX TRAVELADJUSTMENT
K BOTH ENDS
O
Ø R +.001/-.000[+.025/-.000] FORDOWEL PIN, U DP
W
2
1
4
3
CC
2X Ø Z +.001/-.000[+.025/-.000] FORDOWEL PIN, AA DP
CL
Y
I
1 [25.4] MAXTRAVEL
ADJUSTMENT
DD
LL + TRAVEL
2X KK THD THRUSHOCK MOUNTING HOLE
FF
H
6X BB PORTS
2X CUSHIONNEEDLE THISSIDE ONLY
E*
*DIMENSION E IS FROM CENTERLINE OF GUIDE SHAFT.
EXTENSION END RETRACTION END
HH* TRAVELADJUSTMENT
HH* STROKEADJUSTMENT
60
www.phdinc.com/products/classic • (800) 624-8511
CLASSIC06
SLIDE SIZELETTER SGxMx3 SGxMx4 SGxMx5 SGxMx6
DIM. in mm in mm in mm in mmA 8.766 222.7 8.766 222.7 10.964 278.5 12.917 328.1B 7.546 191.7 8.609 218.7 9.576 243.2 10.736 272.7C 5.709 145 6.457 164 7.461 189.5 8.465 215D 3.996 101.5 4.744 120.5 5.748 146 6.752 171.5E 1.5945 40.5 1.9095 48.5 2.0960 53.25 2.3030 58.5F 4.960 126 5.787 147 6.536 166 7.046 179G .965 24.5 1.063 27 1.220 31 1.299 33H .965 24.5 1.064 27 1.219 31 1.299 33I 4.803 122 5.630 143 6.338 161 6.811 173J .039 1 .039 1 .039 1 .039 1K .984 25 .984 25 .984 25 .984 25L 1.772 45 2.008 51 2.283 58 2.441 62M 1.378 35 1.535 39 1.417 36 1.594 40.5N 1.968 50 1.870 47.5 2.284 58 2.559 65O .492 12.5 .492 12.5 .492 12.5 .492 12.5P 4.252 108 4.960 126 5.790 147 6.300 160Q #10 M5 1/4 M6 5/16 M8 3/8 M10R .3129 8 .3129 8 .3129 8 .3129 8S 1/4 M6 5/16 M8 3/8 M10 3/8 M10T 1/4-20 x .63 M6 x 1.0 x 16 5/16-18 x 1 M8 x 1.25 x 25 3/8-16 x 1 M10 x 1.5 x 25 1/2-13 x 1 M12 x 1.75 x 25U .236 6 .236 6 .236 6 .236 6W 3.189 81 3.819 97 4.192 106.5 4.606 117X1 .472 12 .630 16 .787 20 .984 25X2 .630 16 .787 20 .984 25 1.181 30Y .354 9 .354 9 .354 9 .354 9Z .3129 8 .3129 8 .3129 8 .3129 8
AA .49 12.5 .49 12.5 .49 12.5 .49 12.5BB 1/8 NPT 1/8 BSP 1/8 NPT 1/8 BSP 1/4 NPT 1/4 BSP 1/4 NPT 1/4 BSPCC 3.012 76.5 3.956 100.5 4.488 114 5.492 139.5DD .335 8.5 .335 8.5 .335 8.5 .335 8.5EE 7.742 196.6 8.568 217.6 10.123 257.1 11.061 280.9FF 4.643 117.9 5.675 144.1 6.569 166.9 6.925 175.9GG 1.776 45.1 1.874 47.6 2.264 57.5 2.539 64.5HH .984 25 1.142 29 1.226 31.2 1.371 34.8II .155 4.0 .254 6.5 0.174 4.4 .059 1.5JJ 1.811 46 2.046 52 2.323 59 2.480 63KK M20 x 1.5 M20 x 1.5 M25 x 1.5 M25 x 1.5 M25 x 1.5 M25 x 1.5 M25 x 1.5 M25 x 1.5LL 6.693 170 7.441 189 8.445 214.5 9.449 240
MM .33 8.4 .33 8.4 .41 10.4 .41 13.0NN .71 18 .71 18 .83 21.6 .71 18OO .26 6.6 .26 6.6 .35 8.9 .51 13.0
DIMENSIONS: SERIES SG SLIDES WITH RODLESS CYLINDER
61
www.phdinc.com/products/classic • (800) 624-8511
CLAS
SIC0
6
We recommend Series GRW Grippers.For more information, see PHD’s main catalog.
BENEFITS■ True parallel synchronous jaw motion simplifies jaw tooling
design.
■ Large diameter jaw guides supported through the length of thebody provide superior jaw stability, long allowable toolinglengths, and high moment capability.
■ Standard shock pads at both ends of jaw travel provide quietoperation and absorb impact.
■ Double acting for use in both internal and external grippingapplications.
■ Specially formulated piston and rod seals provide longservice life.
■ Optional manifold porting available on either of the twostandard mounting surfaces.
■ Optional 4 mm and 8 mm round inductive proximity switchesor 6 mm square Hall Effect switches are available for indicationof jaw position and simple interfacing to electronic systemcontrols.
■ Units can be field converted to a non-synchronous version.
■ Units are fully field repairable.
U.S. Patent No. 6,598,918 European Patent No. EP1080851
We recommend Series GRC Grippers.For more information, see PHD’s main catalog.
BENEFITS■ Available in four sizes with two jaw and body styles for
maximum application versatility.
■ High grip force to weight ratio for efficient use of spaceand power.
■ True parallel jaw travel with no arcing motion for easytooling design.
■ Double-acting for either internal or external grippingapplications.
■ Optional spring assist can be specified to obtain maximumgripping force.
■ Close tolerance jaw mechanism eliminates jaw play. Use ofdowel pin holes and/or male keys provides precise positioningof tooling.
■ Rugged jaw and body construction can withstand high impactand shock loads.
■ Reed, Hall or Proximity Switches are available for indication ofjaw position and easy interfacing to a system controller.
■ Internal jaw mechanism is constructed of hardened steelcomponents and is enclosed for a minimum life of 10 milliontrouble-free cycles.
U.S. Patent No. 4768821
■ SHURGRIP version available for restraining jaw movement andretaining the part upon loss of air pressure. Licensed underU.S. Patent Number 4768821.
■ SHURGRIP available with enclosed proximity switches to preventfalse signals in applications where metal chips are present.
■ SHURGRIP available with a manual operator located on thebottom of the unit to allow the jaws to be opened and closedwithout air pressure for easy set up and adjustment of tooling.
62
www.phdinc.com/products/classic • (800) 624-8511
CLASSIC06
Series 8600 Parallel Grippers
For new applicationswe recommend
Series GRW & GRC Grippers.See PHD’s main catalog.
8600
63
ww
w.phdinc.com
/products/classic • (800) 624-8511
CLASSIC06
ORDERING DATA: SERIES 8600 PARALLEL GRIPPERS
See Switches and Sensors section in PHD’s maincatalog for information.
TO ORDER SPECIFY:Model, Design No., Options, and Seals.
8660 01
DESIGN NO.
- - 0 0 1
SEALS1 - Buna-N2 - Fluoro-Elastomer
MODEL(2-JAW PARALLEL)
8660 - Size 28670 - Size 38680 - Size 48690 - Size 5 OPTIONS
OPTIONS0 - None3 - Hall Sensor (See note.)
NOTE: Sensor must be used with a PHDSet Point Module.
0
OPTIONS
PART NO.9800-01-03009800-01-0400
SET POINT MODULEDESCRIPTION
4.5-24 VDC, Sink Type Output4.5-24 VDC, Source Type Output
CUSTOM GRIPPERS ARE AVAILABLE. PLEASE CONSULT PHD.
64
www.phdinc.com/products/classic • (800) 624-8511
CLASSIC06
DIMENSIONS: SERIES 8600 PARALLEL GRIPPERS
*TOLERANCE IS ±.0005• A CLOSED REFLECTS THE LARGEST POSSIBLE CLOSED DIMENSION.A OPEN REFLECTS THE SMALLEST POSSIBLE OPEN DIMENSION.
PAC
P
4X Q THREAD
BB/2
S
H
LK
JTOTAL DISTANCE JAW WILL TRAVEL FROMMID-STROKE TO A MIN & A MAX
P
V SQA
Y
X
MR
2X Q THREAD
4X Q THREADF/2
F E
FB D
4X HOLE FOR WA DOWELPIN EACH JAW
2X G THREADEACH JAW
P SQU*
OPTIONAL HALLSENSOR LOCATION
2X HOLE FOR WDOWEL PIN
N* FB
FAFA/2
4X Z THREADEACH JAW
CCDD2X 1/8 NPT
GRIPPER JAWS: SHOWN AT MID-STROKEJAW MOUNTING SURFACES: THIS SURFACE MAY VARY WITH RESPECT TO “K” DIMENSION BETWEEN UNITS. CONSULT FACTORY IF THIS DIMENSION IS CRITICAL TO THE APPLICATION OF THIS UNIT.
AA
JAW PIVOT
.94
6.667.602.2506.8751.500.3751.2501.0001.060
5/16-18 x .44 DP3.000.0163.3771.9152.262.75001.5002.750
1/4-20 x .38 DP2.950.650
1.75002.250
3/16 x .250 DP3/16 x .312 DP
1.4402.000
1/4-20 x .38 DP.2201.850.690
8670
1.25
8.139.382.7508.3752.000.5301.5001.2501.375
3/8-16 x .56 DP3.625.0224.3392.5102.6151.12501.7503.375
5/16-18 x .44 DP3.490.769
2.18802.750
1/4 x .250 DP1/4 x .375 DP
1.9002.500
5/16-18 x .50 DP.2812.155.895
8680
1.75
11.6313.384.00011.7502.500.6252.2501.6251.750
1/2-13 x .69 DP5.125.0305.9503.4503.6251.75002.7505.000
3/8-16 x .56 DP4.8101.1253.12504.000
5/16 x .312 DP3/8 x .500 DP
2.4003.500
3/8-16 x .62 DP.3443.0001.240
8690LETTER
DIM.NOMINAL
JAW TRAVELA CLOSED •
A OPEN •
BCDEF
FAFBGHJKLMN*P
PAQRS
U*VW
WAXYZ
AACCDD
.57
5.095.661.7505.1251.250.312.875.812.875
1/4-20 x .38 DP2.250.0102.4141.1871.690.70001.2502.250
10-24 x .38 DP2.315.477
1.37501.750
5/32 x .187 DP1/8 x .250 DP
1.2001.500
10-24 x .31 DP.1871.315.625
8660MODEL NUMBER
All dimensions are reference only unless specifically toleranced.
65
www.phdinc.com/products/classic • (800) 624-8511
CLAS
SIC0
6
SERIES 7900 PARALLEL GRIPPERS
For new applicationswe recommend
Series GRW & GRC Grippers.See PHD’s main catalog.
7900
66
ww
w.phdinc.com
/products/classic • (800) 624-8511
CLASSIC06
ORDERING DATA: SERIES 7900 PARALLEL GRIPPERSTO ORDER SPECIFY:Model, Design No., Options, Port Type, and Seals.
7960 03
DESIGN NO.
- - 1 1 1
SEALS1 - Buna-N2 - Fluoro-Elastomer
IMPERIAL MODEL7960 - Size 67970 - Size 77980 - Size 87990* - Size 9
OPTIONS0 - None1 - Magnet and Switch Bracket for use with
PHD Series 1590 Reed Switches2 - Magnet and Switch Bracket for use with
PHD Series 1590 Hall Effect Switches5 - Reed Magnet and Switch Bracket Kit
for 1750 Reed Switches6 - Hall Magnet and Switch Bracket Kit for
1750 Hall Effect Switches
0
OPTIONS
PORT TYPE1 - NPT (BSP Straight Thread)2 - SAE O-Ring Ports
METRIC MODEL7962 - Size 67972 - Size 77982 - Size 87992* - Size 9
SERIES 1590 LIQUID RESISTANT SWITCHES
DESCRIPTIONPART NO.15902-115900-115901-1
Sink and /or Source Type 4.5-24 VDC10 Watt Reed SwitchTriac
HALL
REED See Switches and Sensors section in PHD’s main catalog forswitch information.
SERIES 1750 COMPACT PROXIMITY SWITCHES
DESCRIPTIONPART NO.17503-2-0617504-2-0617523-217524-217502-2-0617509-3-0617522-217529-3
Sink Type 4.5-24 VDCSource Type 4.5-24 VDCSink Type 4.5-24 VDC, Quick ConnectSource Type 4.5-24 VDC, Quick ConnectSink or Source Type 4.5-24 VDCAC Type 110-120 VAC with Current LimitSink or Source Type VDC, Quick ConnectAC Type 110-120 VAC, Quick Connect with Current Limit
HALL
REED
Switches must be ordered separately.
*Models 799x are for pneumatic service only.
CUSTOM GRIPPERS ARE AVAILABLE. PLEASE CONSULT PHD.
67
www.phdinc.com/products/classic • (800) 624-8511
CLAS
SIC0
6
DIMENSIONS: SERIES 7900 PARALLEL GRIPPERS
•A CLOSED REFLECTS THE LARGEST POSSIBLE CLOSED DIMENSION.A OPEN REFLECTS THE SMALLEST POSSIBLE OPEN DIMENSION.
EE**
NOMINALJAW TRAVELA CLOSED •
A OPEN •
BCDEFG
HKLMN*OPQ
RST
U*VW
XYZ
AABB NPTBB SAE
CCDDEE
U*T
P SQN*
O
Z
4X Q THREAD2X HOLE FOR
W DOWEL PIN
Y
XKL
S
M
O
N*R
P SQ
8X Q THREAD
V SQU*
T
4X HOLE FORW DOWEL PIN
A
C
B
B/2 F E
D
4X G THREADEACH JAW
CCDD
2X BB PORT
H
AA F CAVITY FOR OPTIONALPROXIMITY SWITCHES
.62
4.164.72
1.8754.000.960.270.625
1/4-20 x.31 DP.625
1.6041.540.750
.7000.275
1.25010-24 x.38 DP2.625.062.687
1.37501.7505/32 x
.187 DP1.2601.170.350.437
1/8 NPT3/8-24.438
1.656.040
1.00
5.716.65
2.2505.5001.130.420.750
5/16-18 x.38 DP.750
2.1612.1001.000.7500.375
1.5001/4-20 x.38 DP3.187.062.875
1.75002.2503/16 x
.250 DP1.7261.600.375.680
1/8 NPT7/16-20
.5032.049
0
1.31
7.228.47
3.0007.0001.440.430
1.0003/8-16 x.44 DP1.0002.8272.7401.000
1.1250.312
1.7505/16-18x .44 DP
3.625.087
1.0942.18802.7501/4 x
.250 DP2.2001.860.562.880
1/8 NPT1/2-20.542
2.388.035
1.80
9.9811.694.0009.5002.190.460
1.5001/2-13 x.56 DP1.5003.8113.6801.125
1.7500.500
2.7503/8-16 x.56 DP4.750.131
1.5623.12504.0005/16 x
.312 DP3.0002.420.875
1.0501/4 NPT9/16-18
.6363.176.050
15.8
105.6119.947.5
101.524.57.0
16.0M6 x 1 x7.9 DP16.040.539.019.0
17.787.0
32.0M5 x 0.8x 9.7 DP
66.51.5
17.534.9244.54.0 x
5.0 DP32.030.09.0
11.01/8 BSP
—11.042.01.0
25.4
145.0168.957.0
140.029.010.519.0
M8 x 1.25x 9.7 DP
19.055.053.525.5
19.059.5
38.0M6 x 1.0x 9.7 DP
81.01.5
22.044.4557.05.0 x
6.5 DP44.040.59.5
17.01/8 BSP
—13.052.0
0
33.3
183.4215.176.0
178.036.511.025.5
M10 x 1.5x 11.2 DP
25.572.069.525.5
28.578.0
44.5M8 x 1.25x 11.2 DP
92.02.5
27.555.5770.07.0 x
6.5 DP56.047.014.522.5
1/8 BSP—
14.060.51.0
45.8
253.5296.9
101.50241.5055.511.538.0
M12 x 1.75x 14.2 DP
38.097.093.528.5
44.4513.070.0
M10 x 1.50x 14.2 DP
120.53.5
39.579.37101.58.0 x
8.0 DP76.061.522.027.0
1/4 BSP—
16.080.51.0
LETTERDIM.
MODEL NUMBER
NOTES:1) *TOLERANCE IS ±.0005 [±0.012]2) **EE DIMENSION IS TO BUSHING BLOCK MTG SCREWS3) NUMBERS IN [ ] ARE FOR METRIC UNITS AND ARE IN mm
7960in
7962mm
7970in
7972mm
7980in
7982mm
7990in
7992mm
All dimensions are reference only unless specifically toleranced.
68
www.phdinc.com/products/classic • (800) 624-8511
CLASSIC06
We recommend Series GRB 180 ° Jaw Motion Grippers.For more information, see PHD’s main catalog.
We recommend Series 5300 Angular Oval Grippers.For more information, see PHD’s main catalog.
BENEFITS■ Double-acting for either internal or external gripping
applications.
■ Optional internal springs allow the unit to be used as a single-acting gripper, for additional grip force, or for grasping anobject without air pressure.
■ Close tolerance jaw mechanism minimizes jaw play.
■ Hardened steel pivot mechanism provides long life andlow maintenance.
■ Available in four sizes to cover a wide range of applicationrequirements.
■ Available with a PHD Hall Effect Sensor or with PHD Hall EffectProximity Switches for indication of jaw position andinterfacing with various controllers and logic systems.
BENEFITS■ Series GRB Grippers provide up to 180° of angular jaw travel
allowing the jaws to completely retract from the work areaeliminating an otherwise required axis of travel.
■ Jaws rotate completely clear of work area eliminating anotherwise required axis of travel
■ Three standard jaw rotations available: 60°, 90°, and 180°
■ One piece body minimizes jaw play
■ Internal speed restriction removes the need for externalspeed controls in standard applications
■ All units incorporate twin switch slots for flush switchmounting
■ Two mounting surfaces
■ Six sizes available
■ 1-2 day shipping
■ 5 million cycles minimum rated life
69
www.phdinc.com/products/classic • (800) 624-8511
CLAS
SIC0
6
Series 8600 2 Jaw Angular Grippers
For new applicationswe recommend
Series GRB & 5300 Grippers.See PHD’s main catalog.
8600 2 jaw
70
ww
w.phdinc.com
/products/classic • (800) 624-8511
CLASSIC06
See Switches and Sensors section in PHD’s maincatalog for information.
TO ORDER SPECIFY:Model, Design No., Options, and Seals.
8621 01
DESIGN NO.
- - 0 0 1
SEALS1 - Buna-N2 - Fluoro-Elastomer
OPTIONS
IMPERIAL MODEL8621 - Size 28631 - Size 38641 - Size 48651 - Size 5
OPTIONS0 - None3 - Hall Sensor4 - Sensor Ready
0
OPTIONSMETRIC MODEL8623 - Size 28633 - Size 38643 - Size 48653 - Size 5
PART NO.9800-01-03009800-01-0400
SET POINT MODULEDESCRIPTION
4.5-24 VDC, Sink Type Output4.5-24 VDC, Source Type Output
NOTE: Sensor must be used with a PHD Set PointModule which is ordered separately. See Switchesand Sensors section in PHD’s main catalog forinformation and ordering data.
ORDERING DATA: SERIES 8600 ANGULAR GRIPPERSCUSTOM GRIPPERS ARE AVAILABLE. PLEASE CONSULT PHD.
71
www.phdinc.com/products/classic • (800) 624-8511
CLAS
SIC0
6
All dimensions are reference only unless specifically toleranced.
GRIPPER JAWS: SHOWN AT MID-ROTATION
JAW MOVEMENT SHOWS MINIMUM AMOUNT OF JAWROTATION. JAWS MAY OPEN 3° OR CLOSE 3° BEYONDSTATED MINIMUM ROTATION.
2X HOLEFOR W
DOWEL PIN4X Q THREAD
TU*
P SQN*
ZO
DD
SK
6X QTHREAD
RM
L
X
Y
AH J
6.5° MIN
V SQ
P
EF
4X G THREADEACH JAW
B
B/2
C
D
2X 1/8 NPT [1/8 BSP]
OPTIONAL HALL SENSORLOCATION
REF JAW PIVOTCENTERLINE CC
FAA
8621in
ABCDEFG
HJKLMN*OPQ
RST
U*VW
XYZ
AACCDD
NOTES:1) *TOLERANCE IS ±.0005 [±0.012]2) NUMBERS IN [ ] ARE FOR METRIC UNITS AND ARE IN mm
MODEL NUMBER
LETTERDIM
5.0002.2504.000.875.187.750
5/16-18x .44 DP
1.5001.000.968.562
1.534.7500.375
1.5001/4-20 x.38 DP2.222.438.875
1.75002.2503/16 x
.250 DP1.3751.875.375.095.410.690
127.057.0
102.022.05.0
19.0M8 x 1.25x 11.0 DP
38.025.524.514.539.0
19.059.5
38.0M6 x 1.0x 9.5 DP
56.511.022.0
44.4557.05.0 x
6.0 DP35.047.59.52.5
10.517.5
6.2362.7505.5001.000.063
1.0003/8-16 x.56 DP2.0001.1181.200.688
1.7751.1250
.3121.750
5/16-18 x.44 DP2.650.562
1.0942.18802.7501/4 x
.250 DP1.7002.430.562.150.440.895
158.070.0
140.025.51.5
25.5M10 x 1.5x 14.0 DP
51.028.030.517.545.0
28.578.0
45.0M8 x 1.25x 11.0 DP
67.514.528.0
55.5770.07.0 x
6.0 DP43.062.014.54.0
11.023.0
8.6104.0007.5001.5000.00
1.5001/2-13 x.75 DP2.8751.4301.6801.1252.500
1.7500.500
2.7503/8-16 x.56 DP3.685.845
1.5623.12504.0005/16 x
.312 DP2.4303.430.875.300.570
1.240
219.0102.0190.538.00.038.0
M12 x 1.75x 19.0 DP
73.036.543.028.563.544.4513.070.0
M10 x 1.50x 14.0 DP
93.521.539.579.37102.08.0 x
8.0 DP62.087.022.07.514.531.5
8623mm
8631in
8633mm
8641in
8643mm
8651in
8653mm
6.5° MIN
100.044.571.519.06.016.0
M6 x 1 x9.5 DP27.023.021.011.030. 017.78
7.032.0
M5 x 0.8 x9.5 DP46.08.017.534.9244.54.0 x
5.0 DP28.538.09.01.59.516.0
3.9371.7502.812.750.231.625
1/4-20 x.38 DP1.062.906.813.438
1.188.7000.275
1.25010-24 x.38 DP1.813.312.687
1.37501.7505/32 x
.187 DP1.1251.500.350.062.375.625
DIMENSIONS: SERIES 8600 ANGULAR GRIPPERS
72
www.phdinc.com/products/classic • (800) 624-8511
CLASSIC06
BENEFITS■ Three jaw design provides self-centering and maximum contact
between part and jaw tooling, making these grippers ideal forhigh moment applications.
■ Very low profile to grip force and jaw travel ratios are ideal foruse in confined work areas.
■ Eight sizes are offered in both imperial and metric versions formaximum application versatility.
■ Jaw motion is true parallel and synchronous for easy design ofjaw tooling.
■ Pneumatically powered units are double acting for use in bothinternal and external applications.
■ Close tolerance jaw mechanism made of hardened steeleliminates play and is enclosed for a minimum 10 milliontrouble-free cycles.
■ Male and female keys are standard on jaws providing precisionpositioning of jaw tooling.
■ Proximity switches are available for indications of jaw position.
■ Units are fully field repairable.
■ Optional spring assist can be specified to enhance maximumgripping force or for part retention upon loss of air pressure.
■ Optional part ejector assists in part location upon grip release.
■ Finger blanks are available for custom fitting of fingers to thepart’s shape.
We recommend Series GRT Grippers.For more information, see PHD’s main catalog.
73
www.phdinc.com/products/classic • (800) 624-8511
CLAS
SIC0
6
Series 7900 2 & 3 Jaw Angular Grippers
For new applicationswe recommend
Series GRT Grippers.See PHD’s main catalog.
For new applicationswe recommend
Series GRB & 5300 Grippers.See PHD’s main catalog.
7900 2, 3 jaw
74
ww
w.phdinc.com
/products/classic • (800) 624-8511
CLASSIC06
ORDERING DATA: SERIES 7900 ANGULAR GRIPPERS
NOTES:1) Sensor must be used with a PHD Set Point Module. See
Switches and Sensors section in PHD’s main catalog forinformation and ordering data.
2) 792x Grippers are available with one switch only. All otherunits are available for use with two switches.
3) Switches must be ordered separately.4) *SAE not available on metric units.5) **Models 795x are for pneumatic service only.
TO ORDER SPECIFY:Model, Design No., Options, Port Type,and Seals.
7920 02- - 1 1 10
OPTIONS0 - None1 - Magnet and Switch Bracket for use with PHD Series 1590 Reed Switches2 - Magnet and Switch Bracket for use with PHD Series 1590 Hall Effect Switches3 - Hall Sensor (See note 1.)4 - Sensor Ready5 - Reed Magnet and Switch Bracket Kit for 1750 Reed Switches6 - Hall Magnet and Switch Bracket Kit for 1750 Hall Effect Switches
OPTIONSIMPERIAL MODEL2 JAW ANGULAR
7920 - Size 2, Jaw Style 17921 - Size 2, Jaw Style 27930 - Size 3, Jaw Style 17931 - Size 3, Jaw Style 27940 - Size 4, Jaw Style 17941 - Size 4, Jaw Style 2
**7950 - Size 5, Jaw Style 1**7951 - Size 5, Jaw Style 2
3 JAW ANGULAR7924 - Size 27934 - Size 37944 - Size 4
**7954 - Size 5
SEALS1 - Buna-N2 - Fluoro-Elastomer
DESIGN NO.01 - 7900 3-Jaw Angular02 - 7900 2-Jaw Angular
PORT TYPE1 - NPT [BSP]2*- SAE O-Ring Ports
METRIC MODEL2 JAW ANGULAR
7922 - Size 2, Jaw Style 17923 - Size 2, Jaw Style 27932 - Size 3, Jaw Style 17933 - Size 3, Jaw Style 27942 - Size 4, Jaw Style 17943 - Size 4, Jaw Style 2
**7952 - Size 5, Jaw Style 1**7953 - Size 5, Jaw Style 2
3 JAW ANGULAR7925 - Size 27935 - Size 37945 - Size 4
**7955 - Size 5
SERIES 1590 LIQUID RESISTANT SWITCHES
DESCRIPTIONPART NO.15902-115900-115901-1
Sink and /or Source Type 4.5-24 VDC10 Watt Reed SwitchTriac
HALL
REED
See Switches and Sensors section in PHD’s main catalogfor information.
SERIES 1750 COMPACT PROXIMITY SWITCHES
DESCRIPTIONPART NO.17503-2-0617504-2-0617523-217524-217502-2-0617509-3-0617522-217529-3
Sink Type 4.5-24 VDCSource Type 4.5-24 VDCSink Type 4.5-24 VDC, Quick ConnectSource Type 4.5-24 VDC, Quick ConnectSink or Source Type 4.5-24 VDCAC Type 110-120 VAC with Current LimitSink or Source Type VDC, Quick ConnectAC Type 110-120 VAC, Quick Connect with Current Limit
HALL
REED
See Switches and Sensors section in PHD’s main catalog forinformation.
CUSTOM GRIPPERS ARE AVAILABLE. PLEASE CONSULT PHD.
75
www.phdinc.com/products/classic • (800) 624-8511
CLAS
SIC0
6
DIMENSIONS: SERIES 7900 ANGULAR GRIPPERS - JAW STYLE 1
CAVITY FOR OPTIONALPROXIMITY SWITCHES
2X BB PORTOPTIONAL HALL SENSORLOCATION
REF JAW PIVOTCENTERLINE CCDD
D
F AAC'BORED THRUHOLE FORG SCREW
B
B/2
C
S
K
4X HOLEFOR W
DOWEL PIN
8X QTHREAD
N*
O
P SQ
R
M
L
V SQU*
T
X
Y A
EE MAXGRIPPERMECHANISM
H
1.5° MIN11.5° MIN
4X Q THREAD
TU*
P SQN*Z
O
2X HOLEFOR W
DOWEL PIN
GRIPPER JAWS: SHOWN AT PARALLEL POSITION
JAW MOVEMENT SHOWS MINIMUM AMOUNT OF JAWROTATION. JAWS MAY OPEN 3° OR CLOSE 3° BEYONDSTATED MINIMUM ROTATION.
7920in
7922mm
7930in
7932mm
7940in
7942mm
7950in
7952mm
ABCDFGHKLMN*OPQ
RST
U*VW
XYZ
AABB
BB SAECCDDEE
130.0101.5190.538.089.0M1073.0
145.528.557.0
44.4513.070.0
M10 x 1.50 x14.0 DP149.222.039.5
79.37101.5
8.0 x 8.0
124.017.522.044.5
1/4 BSP—
16.080.56.5
5.1254.0007.5001.5003.5003/8
2.8755.7341.1252.250
1.7500.500
2.7503/8-16 x.56 DP5.875.845
1.5623.12504.0005/16 x
.312 DP4.889.688.875
1.7501/4 NPT9/16-18
.6363.176.250
89.070.0
140.025.570.0M851.0
116.517.543.0
28.578.0
44.5M8 x 1.25 x
11.0 DP109.514.027.5
55.5770.0
7.0 x 6.5
102.015.014.033.5
1/8 BSP—
14.060.55.0
3.5002.7505.5001.0002.7505/162.0004.587.688
1.6881.1250.312
1.7505/16-18 x
.44 DP4.312.562
1.0942.18802.7501/4 x
.250 DP4.025.598.562
1.3121/8 NPT1/2-20.542
2.388.200
63.557.0
101.522.051.0M638.086.014.039.5
19.059.5
38.0M6 x 1.0 x
9.5 DP95.211.022.0
44.4557.0
5.0 x 6.5
75.512.09.5
23.01/8 BSP
—13.052.04.0
2.5002.2504.000.875
2.0001/4
1.5003.390.562
1.562.7500.375
1.5001/4-20 x.38 DP3.749.438.875
1.75002.2503/16 x
.250 DP2.965.465.375.900
1/8 NPT7/16-20
.5032.049.160
46.044.571.519.038.0M427.062.011.030.0
17.787.0
32.0M5 x 0.8 x
9.5 DP77.88.0
17.534.9244.5
4.0 x 5.0
54.07.59.0
17.51/8 BSP
—11.042.03.5
1.8121.7502.812.750
1.500#10
1.0622.438.438
1.188.7000.275
1.25010-24 x.38 DP3.063.312.687
1.37501.7505/32 x
.187 DP2.126.285.350.688
1/8 NPT3/8-24.438
1.656.130
NOTES:1) *TOLERANCE IS ±.0005 [±0.012]2) NUMBERS IN [ ] ARE FOR METRIC UNITS AND ARE IN mm
MODEL NUMBERLETTER
DIM
All dimensions are reference only unless specifically toleranced.
76
www.phdinc.com/products/classic • (800) 624-8511
CLASSIC06
DIMENSIONS: SERIES 7900 ANGULAR GRIPPERS - JAW STYLE 2
All dimensions are reference only unless specifically toleranced.
2X HOLEFOR W
DOWEL PIN4X Q THREAD
TU*
P SQN*Z
O
6.5°MIN
CAVITY FOR OPTIONALPROXIMITY SWITCHES
2X BB PORTOPTIONAL HALL SENSORLOCATION
REF JAW PIVOTCENTERLINE CCDD
FAA
EF
4X G THREADEACH JAW
B
B/2
C
D
SK
4X HOLEFOR W
DOWEL PIN
8X QTHREAD
N*
O
P SQ
R
M
L
X
Y
AH J
V SQU*
T
GRIPPER JAWS: SHOWN AT MID-POINT OF JAW ROTATION
JAW MOVEMENT SHOWS MINIMUM AMOUNT OF JAWROTATION. JAWS MAY OPEN 3° OR CLOSE 3° BEYONDSTATED MINIMUM ROTATION.
7921in
7923mm
7931in
7933mm
7941in
7943mm
7951in
7953mm
6.5°MIN
ABCDEFG
HJKLMN*OPQ
RST
U*VW
XYZ
AABB
BB SAECCDD
3.9371.7502.812.750.231.625
1/4-20 x.38 DP1.062.906.813.4381.188.7000.2751.250
10-24 x.38 DP3.063.312.687
1.37501.7505/32 x
.187 DP1.1251.500.350.062
1/8 NPT3/8-24.4381.656
100.044.571.519.06.016.0
M6 x 1 x9.5 DP27.023.021.011.030.017.78
7.032.0
M5 x 0.8 x9.5 DP77.88.017.534.9244.5
4.0 x 5.0
28.538.08.51.5
1/8 BSP—
11.042.0
5.0002.2504.000.875.187.750
5/16-18 x.44 DP1.5001.000.968.5621.562.7500.3751.500
1/4-20 x.38 DP3.749.438.875
1.75002.2503/16 x
.250 DP1.3751.875.375.095
1/8 NPT7/16-20
.5032.049
127.057.0101.522.05.019.0
M8 x 1.25 x11.0 DP
38.025.524.514.039.519.05
9.538.0
M6 x 1.0 x9.5 DP95.211.022.044.4557.0
5.0 x 6.5
35.047.59.52.5
1/8 BSP—
13.052.0
6.2362.7505.5001.000.0631.000
3/8-16 x.56 DP2.0001.1181.200.6881.6881.1250
.3121.750
5/16-18x .44 DP
4.312.5621.0942.18802.7501/4 x
.250 DP1.7002.430.562.150
1/8 NPT1/2-20.5422.388
158.070.0140.025.51.525.5
M10 x 1.5 x14.0 DP
51.028.030.517.543.028.57
8.044.5
M8 x 1.25 x11.0 DP109.514.027.555.5770.0
7.0 x 6.5
43.062.014.04.0
1/8 BSP—
13.561.0
8.6104.0007.5001.5000.001.500
1/2-13 x.75 DP2.8751.4301.6801.1252.2501.7500
.5002.750
3/8-16 x.56 DP5.875.8451.5623.12504.0005/16 x
.312 DP2.4303.430.875.300
1/4 NPT9/16-18
.6363.176
219.0101.5190.538.00.038.0
M12 x 1.75x 19.0 DP
73.036.543.028.557.044.4513.070.0
M10 x 1.50x 14.0 DP
149.222.039.579.37101.5
8.0 x 8.0
62.087.022.07.5
1/4 BSP—
16.081.0
NOTES:1) *TOLERANCE IS ±.0005 [±0.012]2) NUMBERS IN [ ] ARE FOR METRIC UNITS AND ARE IN mm
MODEL NUMBERLETTER
DIM
77
www.phdinc.com/products/classic • (800) 624-8511
CLAS
SIC0
6
DIMENSIONS: SERIES 7900 3 JAW ANGULAR GRIPPERS
1.2463.000.500.020.437
10-24 x.28 DP1.056.550.640.813
1.563.7000.275
1.25010-24 x.38 DP3.438.307.687
1.37501.7505/32 x
.187 DP.875
1.188.350.017
1/8 NPT3/8-24.438
1.656
31.576.013.00.5
11.0M5 x 0.8x 7.0 DP
27.014.016.520.540.0
17.787.0
32.0M5 x 0.8x 9.5 DP
87.58.0
17.534.9244.54.0 x
5.0 DP22.030.09.00.5
1/8 BSP—
11.042.0
1.5873.750.750.231.625
1/4-20 x.38 DP1.250.906.813.816
1.816.7500.375
1.5001/4-20 x.38 DP4.000.434.875
1.75002.2503/16 x
.250 DP1.1251.500.375.062
1/8 NPT7/16-20
.5032.049
40.595.019.06.0
16.0M6 x 1.0x 9.5 DP
32.023.020.521.046.0
19.059.5
38.0M6 x 1.0x 9.5 DP
101.511.022.0
44.4557.05.0 x
6.5 DP28.538.09.51.5
1/8 BSP—
13.052.0
2.0224.750.875.187.750
5/16-18 x.44 DP1.6251.000.968.940
1.9411.1250
.3121.750
5/16-18 x.44 DP4.565.560
1.0942.18802.7501/4 x
.250 DP1.3751.875.562.095
1/8 NPT1/2-20.542
2.388
51.5120.522.05.0
19.0M8 x 1.25x 11.0 DP
41.025.524.524.049.5
28.578.0
44.5M8 x 1.25x 11.0 DP
116.014.027.5
55.5770.07.0 x
6.5 DP35.047.514.02.5
1/8 BSP—
14.060.5
2.5946.2501.000.063
1.0003/8-16 x.56 DP2.3121.1181.2001.2462.371
1.7500.500
2.7503/8-16 x.56 DP5.996.754
1.5623.12504.0005/16 x
.312 DP1.7002.430.875.150
1/4 NPT9/16-18
.6363.176
66.0159.025.51.525.5
M10 x 1.50x 14.5 DP
59.028.530.531.560.044.4513.070.0
M10 x 1.50x 14.0 DP
152.019.039.579.37101.58.0 x
8.0 DP43.062.022.04.0
1/4 BSP—
16.080.5
JAW MOVEMENT SHOWS MINIMUM AMOUNT OF JAWROTATION. JAWS MAY OPEN 3° OR CLOSE 3° BEYONDSTATED MINIMUM ROTATION.
R
P SQ
L
SK
O
N*
8X QTHREAD4X HOLE
FOR WDOWEL PIN
U*T
V SQ
REF JAW PIVOTCENTERLINE
AA
X F
M
C DIAU*
T
O
ZN*P SQ
4X Q THREAD2X HOLE FORW DOWEL PIN
OPTIONAL HALLSENSOR LOCATION
120°
Y
F
E
D
J
H
4X G THREADEACH JAW
2X BB PORT
DD
B
6.5˚ MINCAVITY FOR OPTIONALREED & HALL SWITCHES
CC
6.5˚ MIN
NOTES:1) *TOLERANCE IS ±.0005 [±0.012]2) NUMBERS IN [ ] ARE FOR METRIC UNITS AND ARE IN mm
MODEL NUMBERLETTER
DIMBCDEFG
HJKLMN*OPQ
RST
U*VW
XYZ
AABB
BB SAECCDD
7924in
7925mm
7934in
7935mm
7944in
7945mm
7954in
7955mm
All dimensions are reference only unless specifically toleranced.
78
www.phdinc.com/products/classic • (800) 624-8511
CLASSIC06
Series 190 Angular Grippers
190
gripper shown withfinger blank kit
79www.phdinc.com/products/classic • (800) 624-8511
CLAS
SIC0
6
ORDERING DATA: SERIES 190 ANGULAR GRIPPERSTO
OR
DER
SPE
CIFY
:M
odel
, Des
ign
No.
, Sen
sor o
r Sw
itch
Opt
ions
,Sp
ring
Opt
ions
, and
Sea
ls.
1900
25
--
40
20
DES
IGN
NO
.OP
TION
S
SPR
ING
OPT
ION
S0
-N
one
1-
Sprin
g cl
ose
(Sin
gle
actin
g on
ly)
2-
Sprin
g op
en(C
an b
e us
ed a
s do
uble
act
ing)
Opt
ions
-1 a
nd -2
not
ava
ilabl
e on
Mod
el 1
9002
SEAL
S2
- Flu
oro-
Elas
tom
er(S
tand
ard)
SEN
SOR
OR
SW
ITCH
OPT
ION
S4
-H
all S
enso
r Rea
dy o
r JC1
STP-
x Se
nsor
R
eady
(See
not
es 1
& 2
.)(N
ot a
vaila
ble
with
spr
ing
optio
n)5
-Pr
oxim
ity S
witc
h R
eady
(4 m
m ro
und
switc
hes)
MO
DEL
BO
RE
SIZE
NO
.m
m(i
n)19
002
8.7
(.343
)19
012
12.7
(.500
)19
022
19(.7
50)
1903
225
.4(1
.00)
PRO
XIM
ITY
SWIT
CHBR
ACKE
T &
TAR
GET
KIT
S
MO
DEL
NO
.19
002
1901
219
022
1903
2
PART
NO
.18
074
1809
018
075
1809
1
HAL
L SE
NSO
R K
ITS
MO
DEL
NO
.19
002
1901
219
022
1903
2N
ot a
vaila
ble
with
spr
ing
optio
n.
PART
NO
.18
057-
0418
058-
0418
059-
0418
060-
04
PRO
XIM
ITY
SWIT
CHES
DES
CRIP
TIO
NPA
RT N
O.
1843
0-00
1-02
1843
0-00
2-02
4 m
m R
ound
Cur
rent
Sin
king
(NPN
)4
mm
Rou
nd C
urre
nt S
ourc
ing
(PN
P)Se
e Sw
itche
s an
d Se
nsor
s se
ctio
n fo
r det
ails
.
FIN
GER
BLA
NK
KITS
MO
DEL
NO
.19
002
1901
219
022
1903
2
PART
NO
.18
070
1807
118
072
1807
3
Incl
udes
one
eac
h: ta
rget
,br
acke
t, an
d sc
rew
NO
TES:
1)
Hal
l Sen
sor m
ust b
e us
ed w
ith a
PH
D S
et P
oint
Mod
ule
whi
ch is
ord
ered
Grip
per w
ith s
enso
r opt
ion
4 or
5 is
ass
embl
ed w
ith th
e in
tern
al c
ompo
nent
s re
quire
d to
use
the
resp
ectiv
e de
vice
s lis
ted
in e
ach
optio
n. T
he s
enso
rs a
nd a
ny re
late
d de
vice
s an
d/or
mou
ntin
g ki
ts m
ust b
e or
dere
d se
para
tely
.
sepa
rate
ly. S
ee S
witc
hes
and
Sens
ors
sect
ion
for i
nfor
mat
ion
and
orde
ring
data
.2) 3)
Prox
imity
sw
itche
s, b
rack
et k
its, a
nd fi
nger
kits
mus
t be
orde
red
sepa
rate
ly.
UN
IQU
E G
RIP
PER
S AR
E AV
AILA
BLE.
PLE
ASE
CON
SULT
PH
D.
See
Switc
hes
and
Sens
ors
sect
ion
for i
nfor
mat
ion.
SET
POIN
T M
OD
ULE
S
PART
NO
. D
ESCR
IPTI
ON
98
00-0
1-03
00
4.5-
24 V
DC,
Sin
k T y
pe O
utpu
t
9800
-01-
0400
4.
5-24
VD
C, S
ourc
e Ty
pe O
utpu
t
SER
IES
JC1S
TP 2
-PO
SITI
ON
MAG
NET
IC S
ENSO
RS
PART
NO
. D
ESCR
IPTI
ON
JC1S
TP-2
PNP
(Sou
rce)
Sol
id S
tate
, 12-
30 V
DC,
2 m
cab
le
JC1S
TP-K
PNP
(Sou
rce)
Sol
id S
tate
, 12-
30 V
DC,
Qui
ck C
onne
ct
Incl
udes
1 s
enso
r and
inst
alla
tion
dire
ctio
ns
SER
IES
JC1S
TP S
ENSO
R
MO
UN
TIN
G K
ITS
MO
DEL
NO
.KI
T PA
RT N
O.
1900
286
944-
05-5
1901
286
944-
06-5
1902
286
944-
07-5
1903
286
944-
08-5
80www.phdinc.com/products/classic • (800) 624-8511
CLASSIC06
DIMENSIONS: SERIES 190 ANGULAR GRIPPERS
All dimensions are reference only unless specifically toleranced.
6X CLEARANCE HOLEFOR W DOWEL PIN
8X Q THREAD P
B
2X THRU Ø ANDC’BORE FOR Z SHCS
13˚ MIN
JAWPIVOTPOINT
EE MAXGRIPPER MECHANISM
WHEN JAWS AREFULLY OPENED
AA F/2
F
H
CLEARANCE HOLEFOR U DOWEL PIN1X EACH JAW
2X G THREADTHRU EACH JAWY
LE
4˚ MIN
SEE PROXIMITYSWITCH OPTION
PAGE FOR DETAIL
P
BB PORT FITTINGFOR FF I.D. TUBE IS
SUPPLIED WITH UNIT
REF JAW POINTCENTERLINE
DD CC
RK
C
D
REF JAW POINTCENTERLINE
P
O M S
24
1
3
6
5
NOTES:1)*TOLERANCE IS ±.00082) JAW MOVEMENT SHOWS
MINIMUM AMOUNT OF JAW ROTATION. JAWS MAY OPEN 3° OR CLOSE 5° BEYOND-STATED MINIMUM ROTATION.
3) CIRCLED NUMBERS INDICATE POSITION
LETTER MODEL NO. DIM. 19002 19012 19022 19032 B 20.0 26.0 38.0 50.0 C 5.0 6.5 8.0 12.0 D 3.5 5.0 6.5 8.0 E 7.0 9.0 14.0 19.5 F 6.0 8.0 12.0 16.0 G M2.5 x 0.45 M3 x 0.5 M4 x 0.7 M5 x 0.8 H 13.5 17.0 24.0 26.5 K 16.0 19.5 28.0 36.0 L 3.0 3.5 4.5 5.5 M 6.5 8.0 13.0 12.5 O* 14.0 18.0 22.0 28.0 P* 14.0 18.0 28.0 39.0 Q M3 x 0.5 M3 x 0.5 M4 x 0.7 M5 x 0.8 x 4.5 mm x 4.5 mm x 6 mm x 7.5 mm R 30.5 35.0 43.0 51.0 S 2.5 4.0 5.0 6.5 U 2.0 2.5 3.0 4.0 W 2.5 3.0 4.0 5.0 Y 6.0 7.0 9.0 11.0 Z M3 M3 M4 M5 AA 10.0 12.0 17.0 22.9 BB M3 x 0.5 M3 x 0.5 M5 x 0.8 M5 x 0.8 CC 3.5 3.5 4.5 5.0 DD 13.5 14.5 14.5 19.5 EE 4.6 4.6 7.0 10.0 FF 2.5 2.5 3.0 3.0
* TOLERANCE BETWEEN DOWEL PIN HOLES IS ±0.02
This kit provides the mounting components required to utilize one or two Series JC1STP-x Sensors. Using two switches allows sensing of up to four positions throughout the jaw travel (see note 3). Sensors are ordered separately.
NOTE: Sensor ready option 4 must be specified to use these switches.
MOUNTING KIT FOR SERIES JC1STP 2-POSITION TEACHABLE SENSOR
LETTER DIM
MODEL NUMBER
19x6x 19x7x 19x8x 19x9x
in mm in mm in mm in mm
SW1 .770 19.6 .970 24.6 1.480 37.6 1.950 49.5
SW2A .303 7.7 .324 8.2 .350 8.9 .381 9.7
A) SW2 CALCULATED USING NOMINAL HEAD HEIGHT OF STANDARD SHCS
.188[4.8]
(SW2 )
2X Ø .169 [4.3]
SW1 SQ
SERIES JC1STP 2-POSITION MAGNETIC SWITCHESPART NO. DESCRIPTIONJC1STP-2 PNP (Source) Solid State, 12-30 VDC, 2 m cable
JC1STP-K PNP (Source) Solid State, 12-30 VDC, Quick Connect
Includes 1 sensor and installation directions
MATCHING CORDSETPART NO. DESCRIPTION
81284-1-001 M8, 4 Pin, Straight Female Connector, 5 m cable
1) SENSOR PLATE MAY BE ROTATED TO ALLOW THE CABLE TO EXTEND FROM ANY SIDE OF UNIT.
2) SENSOR PLATE MOUNTS TO UNIT USING BOTTOM MOUNTING HOLES. UNIT MAY STILL BE MOUNTED USING THESE HOLES, BUT THE SENSOR PLATE MUST BE SANDWICHED BETWEEN THE UNIT AND CUSTOMER MOUNTING PLATE USING LONGER CUSTOMER SUPPLIED SCREWS.
3) DUE TO SIZE LIMITATIONS, THE SENSOR PLATE FOR THE SMALLEST GRIPPER (8400) HAS ONLY 1 GROOVE AND THEREFORE CAN ACCOMMODATE ONLY ONE SENSOR.
SERIES JC1STP SENSOR MOUNTING KITS
MODEL NO. KIT PART NO.
19002 86944-05-5
19012 86944-06-5
19022 86944-07-5
19032 86944-08-5
81
www.phdinc.com/products/classic • (800) 624-8511
CLAS
SIC0
6
Air/Oil Tanks and Reservoirs
Accessories
83
www.phdinc.com/products/classic • (800) 624-8511
CLAS
SIC0
6
AIR/OIL TANKS AND RESERVOIRS
TYPICAL AIR/OIL TANK CIRCUIT
Circuit showstypical air/oilapplication*. Four-wayvalve feeds air alternatelyto tanks which in turnsupply pressurized oil tohydraulic cylinder.Piston speed onhydraulic cylinder can beregulated as desired withPort Controls as shown,or external flow control valves.
*NOTE: PHD recommends the use of an air/oil piston on unitsfor this type of application. The standard piston and sealconfiguration will allow oil to transfer from one tank to the other.
OIL
AIR
OIL
BENEFITS■ Air/Oil Tanks, pressurized by shop air, provide a simple source
of power for low pressure hydraulic cylinders. They may beused as reservoirs and in conjunction with air/oil boosters.
■ Systems of this type also offer the advantage of being selfpurging because the tanks must be mounted vertically at thehighest point of the circuit.
■ Tanks are capable of moderately fast cycle rates withoutfoaming when care is taken to size the tank to the maximumexpected flow rate.
SPECIFICATIONS A20 TANKSBARREL Transparent, Shatterproof FiberglassEND CAPS Aluminum AlloyBAFFLES Included on both capsPORTS NPTMOUNTING Bracket on each capFILL PORT Included on top cap (NPT)
RESERVOIRSSPECIFICATIONS 13459-xx-1 68397-xx-1BARREL Transparent, Shatterproof FiberglassEND CAPS Aluminum Alloy AluminumBAFFLES Included on both caps —PORTS NPT BSP ConnectionMOUNTING Bracket on each capFILL PORT Included on top cap (NPT) BSP
x 4A2O
TO ORDER SPECIFY:Model, Bore Size, and TankLength (“LD” Dimension).
1-3/8BORE SIZE
MODEL
TUBE LENGTH“LD” Dimension in
1" increments(2" Minimum Length)
ORDERING DATA
The reservoir serves as an accumulator to compensate for oilvolume changes due to temperature variation. The reservoir shouldhave 20 psi [1.3 bar] pressure at all times to ensure the systemremains purged.
20 psi
84
www.phdinc.com/products/classic • (800) 624-8511
CLASSIC06
DIMENSIONS: AIR/OIL TANKS AND RESERVOIRS
All dimensions are reference only unless specifically toleranced.
AIR/OIL TANKS RESERVOIRS3
1
2 4
N
M
L DIA
2X A DIA THRUG
H
K + LD*J + LD*
E TYP
F TYPC TYP
2X B NPTPORT
D TYP
3
1
2 4
N
M
L DIA
2X A DIA THRUG
H
KJ
E TYP
F TYPC TYP
2X B NPTPORT
D TYP
NOTES:1) PORT POSITION INDICATED BY CIRCLED NUMBERS2) TANKS ARE USED IN AIR/OIL APPLICATIONS AND ARE STROKE OR
VOLUME CHANGE SENSITIVE.3)*SEE TANK SELECTION AND SIZING FOR LD DIMENSION.
TANK TANK AREA MAX. FLOW LETTER DIMENSIONBORE in2 in3/sec A B C D E F G H J K L M N1-1/8 .967 4.90 .219 1/8 .500 1.062 .187 .545 1.250 .625 1.500 1.875 1.500 1.531 .0621-3/8 1.438 7.35 .219 1/4 .500 1.250 .187 .647 1.250 .625 2.000 2.375 1.875 1.906 .062
2 3.091 9.14 .219 1/4 .500 1.312 .187 .647 1.250 .625 2.125 2.500 2.500 2.531 .0623 6.959 18.92 .406 3/8 1.000 2.062 .375 1.115 2.250 1.125 3.250 4.000 3.500 3.531 .125
NOTES:1) PORT POSITION INDICATED BY CIRCLED NUMBERS2) RESERVOIRS ARE USED WITH TANDEM UNITS AND FOR SMALL
VOLUME CHANGES DUE TO TEMPERATURE OR LOSS OR GAIN FACTOR.3) RESERVOIR ASSEMBLY INCLUDES FITTINGS AND TUBING TO CONNECT
TO TANDEM UNITS.
RESERVOIR PART NO. LETTER DIMENSIONIMPERIAL METRIC A B C D E F G H J K L M N PRIMARY USE
13459-01-1 68397-01-1 .219 1/8 NPT [1/8 BSP] .500 1.062 .187 .545 1.250 .625 3.500 3.875 1.500 1.531 .062 3/4" - 1-1/8" BORE SERIES TD CYLINDERS13459-02-1 68397-02-1 .219 1/4 NPT [1/4 BSP] .500 1.312 .187 .647 1.250 .625 5.125 5.500 2.500 2.531 .062 SERIES 8000 TANDEM ROTARY ACTUATORS13459-03-1 68397-03-1 .219 1/8 NPT [1/8 BSP] .500 1.062 .187 .545 1.250 .625 3.500 3.875 1.500 1.531 .062 SERIES 2000-6000 TANDEM ROTARY ACTUATORS13459-04-1 68397-04-1 .219 1/8 NPT [1/8 BSP] .500 1.062 .187 .545 1.250 .625 3.500 3.875 1.500 1.531 062 1-3/8" BORE SERIES TD CYLINDERS
AIR/OIL TANK DIMENSIONS
RESERVOIR TANK ASSEMBLY DIMENSIONS
RESERVOIR TANK ASSEMBLY
85
www.phdinc.com/products/classic • (800) 624-8511
CLAS
SIC0
6
UNITS OF LENGTH1 inch = 40 lines in 2.54 cm 0.3937011 mil 25.4 µm 0.039371 line 0.635 mm 1.574801 foot = 12 in = 3 hands ft 30.48 cm 0.03280841 yard = 3 feet = 4 spans yd 0.9144 m 1.093611 fathom = 2 yd fath 1.8288 m 0.5468071 rod (perch, pole) rd 5.0292 m 0.1988391 chain = 100 links ch 20.1168 m 0.04970971 furlong = 220 yd fur 0.201168 km 4.970971 mile (Land Mile) mi 1.60934 km 0.621371 nautical mile (intl.) n mi, NM 1.852 km 0.5399571 knot (Knoten) kn 1.852 km/h 0.539957
UNITS OF AREA1 square inch sq in 6.4516 cm2 0.1550001 circular inch 5.0671 cm2 0.1973521 square foot = 144 sq in sq ft 929.03 cm2 1.0764 x 10-4
1 square yard = 9 sq ft sq yd 0.83613 m2 1.195991 acre = 4 roods 4046.8 m2 2.4711 x 10-4
1 square mile = 640 acres sq mi 2.5900 km2 0.38610
UNITS OF VOLUME1 cubic inch cu in 16.387 cm3 0.0610241 cubic foot = 1728 cu in cu ft 28.317 dm3 0.0353151 cubic yard = 27 cu ft cu yd 0.76455 m3 1.307951 register ton = 100 cu ft 2.8317 m3 0.353141 shipping ton 1.13268 m3 0.882861 fluid ounce (GBr) fl oz 0.028413 dm3 35.19501 fluid ounce (USA) fl oz 0.029574 dm3 33.81381 pint = 4 gills (GBr) (liq) pt 0.56826 dm3 1.759751 pint = 4 gills (USA) liq pt 0.47318 dm3 2.113361 dry pint dry pt 0.55061 dm3 1.816161 quart = 2 pints (GBr) (liq) qt 1.13652 dm3 0.879881 quart = 2 pints (USA) liq qt 0.94636 dm3 1.056681 dry quart dry qt 1.10123 dm3 0.9080771 quarter = 64 gal 290.950 dm3 0.00343701 gallon = 2 pottles (GBr) gal 4.54609 dm3 0.2199691 gallon (USA) gal 3.78543 dm3 0.2641701 bushel = 4 pecks (GBr) bu 36.3687 dm3 0.02749621 bushel = 4 pecks (USA) bu 35.2393 dm3 0.02837741 dry barrel 115.628 dm3 0.00864841 petroleum barrel 158.762 dm3 0.0062987
UNITS OF LIGHT1 lambert la 3183.10 cd/m2 x 10 -1
1 foot-lambert ft la 3.42626 cd/m2 0.2918641 candela/sq in cd/sq in 1550.0 cd/m2 6.4516 x 10-4
1 candela/sq ft cd/sq ft 10.7639 cd/m2 0.0929031 footcandle ft cd 10.7639 lx 0.092903
UNITS OF MASS1 grain gr 64.7989 mg 0.01543241 dram dr 1.77185 g 0.5643831 ounce = 16 drams oz 28.3495 g 0.03527391 pound = 16 oz lb 0.453592 kg 2.2046221 quarter = 28 lb 12.7006 kg 0.0787371 hundredweight = 112 lb cwt 50.8024 kg 0.01968411 long hundredweight l cwt 50.8024 kg 0.01968411 short hundredweight sh cwt 45.3592 kg 0.02204621 ton = 1 long ton tn, l tn 1.016047 t 0.9842061 short ton = 2000 lb sh tn 0.907185 t 1.102311
UNITS OF FORCE1 pound-weight lb wt 4.448221 N 0.22480891 pound-force LB, lbf 4.448221 N 0.22480891 poundal pdl 0.138255 N 7.233011 kilogram-force kgf, kgp 9.80665 N 0.10197161 short ton-weight sh tn wt 8.896444 kN 0.11240451 long ton-weight l tn wt 9.964015 kN 0.10036111 ton-force Ton, tonf 9.964015 kN 0.1003611
UNITS OF PRESSURE (FORCE/AREA)1 pound-weight lb wt/sq in 6.8948 kN/m2 0.145038 per square inch ppsi, psi 68.948 mbar 0.01450381 pound-weight lb wt/sq ft 47.880 N/m2 0.0208854 per square foot ppsf, psf 0.47880 mbar 2.088541 kilogram-force/sq in kgf/sq in 1.52003 N/m2 0.6578801 short ton-weight/sq in 13.7895 N/mm2 0.0725521 ton-force/sq in Ton/sq in 15.4443 N/mm2 0.0647491 foot of water ft H2O 0.029891 bar 33.4551 inch of Hg in Hg 1.033864 bar 29.530
UNITS OF WORK AND ENERGY1 foot pound-weight ft lb wt 1.355821 J 0.7375611 foot pound-force ft Lb, ft lbf 1.355817 J 0.7375631 foot-poundal ft pdl 0.0421401 J 23.73041 British Thermal Unit Btu, BTU 1.055056 kJ 0.947817 (intl. steam table) B. th. u. 0.293071 Wh 3.4121411 horse-power hour hph, H Phr 2.6845 MJ 0.37251
h. p. hr. 0.74570 kWh 1.34102
UNITS OF POWER (WORK/TIME)1 foot pound-weight/s ft lb wt/s 1.355821 W 0.7375611 British thermal unit/s Btu/s 1.055056 kW 0.9478171 British thermal unit/h Btu/h 0.293071 W 3.412141 horse-power hp, h. p. 0.74570 kW 1.34102
TEMPERATUREFahrenheit temperature = (Centigrade temperature x 1.8) + 32Centigrade temperature = (Fahrenheit temperature - 32) x 5/9
UNIT & ABBREVIATION SI UNITS CONVERSION* UNIT & ABBREVIATION SI UNITS CONVERSION*
AMERICAN AND BRITISH UNITS OF MEASUREMENT TO SI UNITS
LIMITATION OF WARRANTYAll PHD Products are guaranteed to be free of actual defects in material and workmanship, provided any such defect be reported to
PHD in writing within 1 year of shipment from factory. This warranty is limited to replacing or repairing at the Company's option, F.O.B.the Company’s factory, any part which, upon Company inspection, is found to have a defect in material and/or workmanship. TheCompany in no event shall be liable for indirect or consequential damages arising out of the use of PHD Products. Componentspurchased by the Company from others for inclusion by the Company shall be warranted to the extent set out above and/or to theguaranty or warranty, if any, made by the supplier of said component. APART FROM THE ABOVE EXPRESS WARRANTY, THERE ARE NOWARRANTIES, EXPRESS, IMPLIED OR STATUTORY, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY ANDFITNESS FOR A PARTICULAR PURPOSE, WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF.
PHD expressly reserves the right to substitute materials in the products described in the catalogs and any supplements thereto:however, this shall not apply to special order products and/or custom products where PHD is advised in writing of specific materialrequirements and agrees in writing to comply with the request for such specific materials.
*For conversion into American or British units, e.g., 5 cm x 0.3937 = 1.9685 in
PDF 1/06 6735
the phd advantage
Competitive advantage in manufacturing is what PHD offers toyou when you specify PHD as your automation componentssupplier. Since 1957, PHD has developed and manufactured awide range of actuators, grippers, and accessories providingsolutions for industrial automation. Our commitment to excellencein product, service, and support can be summarized by ourdriving force. “PHD will provide you what you want, when youwant it.”
PHD and our distributor network are ready to serve you.
Use the PHD website to quickly locate your local distributor. Forimmediate service, call our toll free number.
www.phdinc.com
PHD, Inc.9009 Clubridge DriveP.O. Box 9070Fort Wayne, IN 46899 U.S.A.260-747-6151FAX 260-747-6754
PHD GmbHArnold-Sommerfeld-Ring 252499 Baesweiler, GermanyTEL. +49 (0) 2401 805 230FAX +49 (0) 2401 805 [email protected]
distributorsupportWith partners locatedworldwide, we areequipped to provide you awide variety of value addedsupport and ongoingassistance.
superiordeliveryMost orders ship in1-4 working days.Expedited service isavailable.
customproductsOver 40 years experiencewith rapid responsein designing uniqueproducts at customers’requests.
engineeringsoftwareOnline CAD Configuratorand product sizingsoftware eliminates risk inthe design process andsaves time.
9-21
SENSORS
www.phdinc.com/products/switchesandsensors • (800) 624-8511
CAT-
05
BENEFITS: SERIES 1590 HALL SWITCHES
ORDERING DATA: SERIES 1590 SWITCHES
BENEFITS
■ Hall Effect Switches are suitable for use on most Tom Thumb/PHD products.
■ Liquid Resistant Switches can be used in applications wherecoolant or moisture due to washdown is present (IEC IP67rating). Consult PHD for compatibility with caustic orhazardous liquids.
■ Hall Effect Switches are solid state for long life and eliminationof contact bounce. Constant amplitude output is provided foruse with most digital logic systems.
■ Adjustable mounting allows switches to be located anywherewithin range of piston travel.
■ Several switches may be mounted to control or initiate anysequence function.
■ Suitable for use in plant environments where dirt andcontamination create difficulties for electromechanical andother types of controls.
■ LED indicator provides convenient means for positioning andtroubleshooting circuits.
■ Reverse Voltage Protection is built into these switches tosafeguard against switch failure due to reverse hookup.
The PHD Hall Effect Switch is a solid-state device designedspecifically to provide an input signal to various types ofprogrammable controllers or logic systems. Since the Hall EffectSwitch is solid-state, there are no moving parts to wear out.Because of this, the switch offers an infinite number of trouble-freeoperations. The Hall Effect Switch operates on DC current only, and isa dual output for either current sinking or a current sourcing input.
SPECIFICATIONS 15902-1OPERATING PRINCIPLE Hall EffectACTUATED BY Piston MagnetINPUT VOLTAGE 4.5 to 24 VDCOUTPUT TYPE NPN (Sink) or PNP (Source)OUTPUT CURRENT RATING 200 mA. Max. NPN (Sink) or
100 mA. Max. PNP (Source)OUTPUT VOLTAGE DROP .4 VDC Max. NPN (Sink) or
.5 VDC Max. PNP (Source)SWITCH BURDEN 19 mA. Max.CIRCUIT PROTECTION FALSE PULSE No LOAD SHORT No REVERSE VOLTAGE Yes 400 Hz INTERFERENCE No TRANSIENTS NoSPECIAL FEATURE Groundable Braided ShieldPOWER DISSIPATION 300 milliwatt Max.ENVIRONMENTAL IP67OPERATING TEMP. 0° to 48°C
CORDSETSTO ORDER SPECIFY:
SENSINGCIRCUITRY DESCRIPTION
0-1 10 WATT DC or AC Reed1-1 3 AMP AC Reed2-1 NPN or PNP DC Hall
Type, Sensing Circuitry,and Design No.
0-11590NOTES:1) Cordsets for quick connect
switches must be orderedseparately.
2) Other cable lengths available.Consult PHD.
TYPEHall, Reed PART NO.
15903-00-12
15903-90-12
15904-00-12
15904-90-12
DESCRIPTION12 ft [3 m] Cordset for ReedSwitch, Straight Connector12 ft [3 m] Cordset for ReedSwitch, 90° Connector12 ft [3 m] Cordset for HallEffect Switch, Straight Connector12 ft [3 m] Cordset for HallEffect Switch, 90° Connnector
9-22
www.phdinc.com/products/switchesandsensors • (800) 624-8511
CAT-05
SENSORS
BENEFITS: SERIES 1590 REED SWITCHES
BENEFITS
■ Reed Switches are suitable for use on most Tom Thumb/PHDproducts.
■ Adjustable mounting allows switches to be located anywherewithin range of piston travel.
■ Several switches may be mounted to control or initiate anysequence function.
■ Liquid Resistant Switches can be used in applications wherecoolant or moisture due to washdown is present (IEC IP67rating). Consult PHD for compatibility with caustic orhazardous liquids.
■ No externally moving parts to wear or maintain.
■ Suited for use in plant environments where dirt andcontamination create difficulties for electromechanical andother types of controls.
■ LED provides convenient means for positioning and trouble-shooting switch and circuits.
■ Standard Reed suitable for AC or DC service.
■ 3 Amp Switch provides internal transient protection undernormal conditions (AC only).
The PHD Reed Switch can be operated on either AC or DCcurrent. They are ideal for use as inputs for many types ofsequencers and programmable controllers. In some cases they canbe used to drive some relays or valve solenoids. However, electricaltransients (inrush currents or line spikes) associated with inductiveor capacitive loads can damage and shorten the life of the switch.PHD offers a 3 Amp Reed Switch (AC only) to be used for thesetypes of applications.
The 3 Amp Switch is very similar to the Reed Switch inconstruction. The difference is the inclusion of a triac whichupgrades the contact rating to 3 amps. The 3 Amp Switch also hasbuilt-in protection against electrical transients.
15900-1 10 WATT REED SWITCHSPECIFICATIONS 15900-1OPERATING PRINCIPLE Magnetic ReedACTUATED BY Piston MagnetINPUT VOLTAGE 4.5 to 24 VDC or 110 to 120 VAC*OUTPUT TYPE Contact ClosurePOWER CAPACITY 10 Watt Max.CURRENT RATING 200 mA. SwitchedCONTACT RESISTANCE .100 OhmLED INDICATOR Visible voltage range from
24 to 120 AC or DCENVIRONMENTAL IP67OPERATING TEMP. 0° to 80°C
15901-1 3 AMP REED SWITCH (TRIAC)SPECIFICATIONS 15901-1*OPERATING PRINCIPLE Magnetic ReedACTUATED BY Piston MagnetINPUT VOLTAGE 65 to 120 VAC (50/60 Hz)VA MAX. 360CURRENT (BREAK) 3 AmpLEAKAGE 1.7 mA.RESPONSE TIME 1.5 ms On, 0-8.3 ms OffLED INDICATOR Visible throughout voltage rangeENVIRONMENTAL IP67OPERATING TEMP. 0° to 80°C
NOTE: All incandescent loads derate switch capacity to 10%due to inrush current. Consult PHD for higher load requirement forthe 3 Amp switch.
VOLTAGE VS. AMPERES DERATING CURVE
VOLT
AGE
- AC
OR D
C
MILLIAMPERES
5057
6780
100
200
200175150125100
755025
00 50 100 150 200
SAFEOPERATION
AREA
133
* CE certification applicable to 4.5 to 24 VDC range only.
* CE certification not applicable to this switch model.
9-23
SENSORS
www.phdinc.com/products/switchesandsensors • (800) 624-8511
CAT-
05
DIMENSIONS: SERIES 1590 SWITCHES
HALL EFFECT AND REED SWITCH 1.280[32.5]
.763[19.4]
1.411[35.8]
.500[12.7]
.572[14.5]3° TYP
1/2-20 [12 mm] THREADFOR CORDSETREED SWITCHES USE 3 POLEHALL SWITCHES USE 4 POLE
HALL EFFECT WIRING SCHEMATICSPIN ASSIGNMENT
LED
PIN 2
PIN 4
PIN 3 PIN 1
15902-1 - NPN (SINK)
SWITCHVS
PIN 3
PIN 1
V (OUT)PIN 4
R LOADVSL
15902-1 - PNP (SOURCE)
4.5 TO 24VDC
PIN 3
PIN 1
PIN 2
LOAD
SWITCH
All dimensions are reference only unless specifically toleranced.
REED WIRING SCHEMATICS15900-1 AC
PIN 2
PIN 3
PIN 1
LOAD
NEUTRAL
LINE
117VAC
15901-1 AC ONLY
LOAD
SWITCH
PIN 2
PIN 3
NEUTRAL
LINE
117VAC
PIN ASSIGNMENT
LED
PIN 2
PIN 1
PIN 3
15900-1 DC NPN (SINK)
PIN 2
PIN 3
PIN 1LOAD
DC
DC
15900-1 DC PNP (SOURCE)
PIN 2
PIN 3
PIN 1LOAD
DC
DC
(Bi-polar LED emits a green light in the Sinking circuit and a red light in the Sourcing circuit.)
9-24
www.phdinc.com/products/switchesandsensors • (800) 624-8511
CAT-05
SENSORS
DESCRIPTIONstraight connector90° connectorstraight connector90° connector
TYPE OF SWITCHREEDREEDHALL EFFECTHALL EFFECT
PHD CORDSETPART NO.
15903-00-1215903-90-1215904-00-1215904-90-12
DANIEL WOODHEADPART NO.
70215702197043470429
JOYPART NO.
5000 114-35000 114-65000 115-35000 115-6
LUMBERGPART NO.
RKT 3U-618/12FRKWT 3U-618/12FRKT 4U-674/12F
RKWT 4U-674/12F
NOTE: PHD reserves the right to supply any of the cordsets listed.
4 POLEPIN ASSIGNMENT
1 RED WITH BLACK TRACER 2 RED WITH WHITE TRACER 3 RED 4 GREEN
PIN/WIRE COLOR ASSIGNMENT FOR PHD, DANIEL WOODHEAD, JOY, AND LUMBERG CORDSETS
3 POLEPIN ASSIGNMENT
1 GREEN 2 RED WITH BLACK TRACER 3 RED WITH WHITE TRACER
4
1 3
232
1
3 WIRE 4 WIREFACE VIEW OF PLUGS
ENGINEERING DATA: SERIES 1590 SWITCHES
SWITCH CORDSETS1.141
[29.0] MAX
1.718[43.6]
Ø 1/4 [6.4] CORD
1590x-00-xx STRAIGHTCONNECTOR CORDSET 1.203
[30.5] MAX
LED INDICATOR REF
Ø 1/4 [6.4] CORDCORD WILL EXTEND FROM SWITCH ONTHE LED SIDE OF THE SWITCH
1590x-90-xx90° CONNECTOR CORDSET