index [lplusl-linear.de]

3

Index

GD - GS Linear Modules with external rollers p. 4

GDM Driven Linear Modules p.11

IL Linear Modules with internal rollers p.15

ILM Driven Linear Modules p.19

TLM Driven Linear Modules p.24

SLTL Linear Tables p.34

4

Linear Modules Series GD-GSThe GD and GS systems allow linear motions with cost-effective, technically valuable and simple mounting solutions. The rollers ride on the precision shafts is adjustable according to the required application thus providing smooth motion under high speed and light loads, or great rigidity under heavy loads conditions. Such usage flexibility is the result of a perfect system alignment, but, above all, of the eccentric rollers accurate adjustment.A further advantage of these systems lies in that their components are unaffected by external elements like metal particles, dust, etc, discharged during the operation. Furthermore, being equipped with integral rollers with dust-proof covers,these systems do not require any special maintenance. .

Their main features are:

• Position accuracy• Long life• High velocity• Low noise level• No lubrication required• No maintenance required• High dust resistance ( the roller bearings have dust-proof covers)• Interchangeability and easy installation• Versatility for the most different applications.

5

Tabella n°1

Fig. 1

Linear Systems Series GD

Linear Systems series GDThe GD linear system is composed by a guide rail and a carriage.The rail consists of an anodized aluminium extrusion where two hardened, chrome-plated and straightened precision shafts are inserted with H7 tolerance.Rolling procedure is used to secure the shafts into the guide rail.The rail maximum length is 6000 mm.The carriage is composed by an anodized aluminium (steel upon demand) plate. Four, two eccentric and two concentric, "V"shaped rollers with 120° opening angle are fixed to the plate. The standard systems codes and dimensions are listed in Table 1.Our technical department is available for any calculation or development of product versions that are not included in our catalogue.

Type Dimensions ComponentsA A1 B B1 C H dH7 h Guide Carriage Rollers

GD 6 80 51 60 31 8 21 6 12 GD6 C6 17E+17CGD10A 120 83 80 41 10 31 10 20 GD10 C10A 22E+22CGD10B 140 90.5 120 70 15 37 10 20 GD10 C10B 30E+30CGD10C 150 98.5 120 70 20 44 10 20 GD10 C10C 38E+38CGD20A 180 126 150 90 20 51 20 30 GD20 C20A 41E+41CGD20B 200 142 180 100 25 61.5 20 30 GD20 C20B 58E+58CGDX20 300 195 200 120 30 66.5 20 30 GDX20 C20X 58E+58C

Table 1

6

Type Dimensionsa b d1 H a1 b1

GS 10 14.5 17 10 20.5 8 6.3GS 20 27 27 20 34.2 15 10

Table 2

Fig. 2

Fig. 5

Fig. 3 Fig. 4

Linear Systems Series GDS10

Linear System Series GDS10The GDS10 linear system differs from the GD type for its compactness, small size and for the sliding under light load conditions. The system is composed by a guide rail and a carriage.The rail consists of an anodized aluminium extrusion where two hardened, chrome-plated and straightened precision shafts are inserted with H7 tolerance. Rolling procedure is used to secure the shafts into the guide rail.The rail maximum length is 6000 mm.The carriage is composed by an anodized aluminium (steel upon demand) plate. Four, two eccentric and two concentric, rollers,type RPC35 and RPE35, with gothic arch profile, are fixed to the plate (see p.23 Fig.32).

Linear Systems Series GS

Linear Systems series GSThe GS linear system differs from the GD system for the precision shaft fastening screw, the same screw that is used to secure the aluminium profile to the customer's structure. The GS system can be used with inward (Fig.3) or outward (Fig.4) mounted precision shafts.The distance between the two rails can be increased or decreased, which makes it possible for the customer to use the clearance between the guides.For an efficient system operation, it is necessary to make sure the two guides are perfectly parallel when they are mounted.This can be obtained by using a spacer as template when tightening the fastening screws.The profile sections are listed in Table 2. The GS system rollers are the same as in the GD system.The profile maximum length is 6000 mm.

GS Profile Section

Fig. 6 Fig. 7

58E GDX20 4 12.5 6 11 13 59 16 35 58 2.5 6 20 1600 3500

Table 3

7

Rollers for the Linear Systems Series GD/GS 10-20 The rollers used in the Tecnoline systems are made of the steel used for the 100 Cr 6 rolling bearings.They have a “V” shaped profile with 120° opening angle so that the rollers have two contact points with the precision shaft, thus providing smooth sliding and even radial load distribution. The “V” shaped roller show its advantages also in the product life, as the internal structure corresponds to the bearings with slanted contactdouble-row ball bearings.Hence, the rollers can withstand axial loads in both directions. Rollers in all sizes are produced with concentric and/or eccentric spindles.During assembly, first of all the operator shall lock the concentric rollers on the same carriage side, so that the carriage and the rail areaccurately parallelly mounted.Keeping the eccentric rollers on the opposite side, backlash must be eliminated and the system can be preloaded as required (See Fig.6).Table 3 lists the dimensions and the maximum allowable loads.

Roller Guide Dimensions Axial RadialType Type Load Load

A B S N P L M H D E e d1 Fa (N) Fr (N)

22C GD10A 2.5 5.5 2.5 4 5.5 25.5 6 14.5 22 - 2 10 292 29222E GD10A 2.5 5.5 2.5 4 5.5 25.5 6 14.5 22 1.5 2 10 292 29230C GD10B 3 7 2 5 9 33 8 18.1 30 - 3 10 387 96030E GD10B 3 7 2 5 9 33 8 18.1 30 1.5 3 10 387 96038C GD10C 3.5 8.5 2.5 8 12 43 10 22.3 38 - 5 10 552 122538E GD10C 3.5 8.5 2.5 8 12 43 10 22.3 38 2 5 10 552 122541C GD20A 4 10 3 6 13 46 12 28 41 - 5 20 836 168041E GD20A 4 10 3 6 13 46 12 28 41 2 5 20 836 168058C GD20B 4 12.5 6 11 13 59 16 35 58 - 6 20 1600 350058E GD20B 4 12.5 6 11 13 59 16 35 58 2.5 6 20 1600 350058C GDX20 4 12.5 6 11 13 59 16 35 58 - 6 20 1600 3500

8

Fig. 8

17C GD6-GD6M 2 8 1.5 2.5 4.5 18.5 4 10.5 17 - - 6 250 52017E GD6-GD6M 2 8 1.5 2.5 4.5 18.5 4 10.5 17 0.5 - 6 250 520

Table 5

50A GD20 2,5 25 6.5 10 14 58 16 35 50 1.5 8 20 - 3500

Tabl4

Supporting rollersRollers with cylindrical outer rings have proved very useful in some applications, and especially when it becomes necessary to compensate the lack of parallelism caused by the structure itself, or by post-welding structural settling. Table 4 lists the rollers' dimensions and maximum allowableloads (see Fig.7).

Roller System Dimensions Axial RadialType Type Load Load

A B S N P L M H D E e d1 Fa (N) Fr (N)34A GD10 2 17 3 4 15 41 10 22 34 1 5 10 - 130036A GD20 0,5 20 3 4 15 42.5 12 28 36 1 5 20 - 1600

Rollers for GD6 Linear SystemsThe 17E and/or 17C type rollers for the GDS6 system have gothic arch shaped rolling surfaces.Table 5 lists the rollers' dimensions and maximum allowable loads (see Fig.8)

Roller Guide Dimensions Axial Radial Type Type Load Load

A B S N P L M H D E e d1 Fa (N) Fr (N)

9

(Kg)GD6 C6 17C - 17E 570 330 15 25 20 0.18GD10 C10A 22C - 22E 410 812 23 53 48 0.26GD10 C10B 30C - 30E 1900 1600 54 69 69 0.62GD10 C10C 38C - 38E 2650 2400 77 108 108 0.92GD20 C20A 41C - 41E 3215 3200 150 210 210 1.34GD20 C20B 58C - 58E 6980 6400 320 454 454 2.64GDX20 C20X 58C - 58E 6980 6400 384 624 624 7.54GDS10 C10S RPC35 - RPE35 2320 1150 56 111 77,8 0.96

Table 6

Fig. 9

Linear Systems Series GD10-GD20-GDS-GD6

Linear Systems series GD 10 - GD 20 - GDS - GD6The GD and GS Linear Systems can withstand reversing loads and moments on each axis. Table 6 lists the maximum allowable values for eachsystem.

Components Limit Load (N) Allowable Moment (Nm) CarriageGuide Carriage Rollers Fr Fa My Mz Mx Weight

10

Ø10

Ø20

Ø10

Ø20

Ø20

Ø6

Ø10

GD20

GDX20

GD6

GS10

GS20

GDS10

GD10

Fig. 10

Profiles’ Dimensional Table

11

Driven Linear Modules Series GDMThe systems with driven linear modules series GDM are cost-effective and reliable systems for automated production cycles and,more generally, for handling systems.The wide range of driven linear modules with their standard or custom-designed components and fittings can solve the problems of travel ranges, velocity, loads, and, more generally, all automation related issues. The driven linear modules series GDM are composed by the following parts:

• Driving HeadAnodized aluminium unit with leading sheave housing and standard or custom mounting holes on both sides for the gearmotor.• Idle HeadAnodized aluminium unit with loose pulley housing and eccentric spindle for the belt tensioning.• Supporting ProfileIt is a special aluminium ribbed extrusion, with an internal channel for the drive belt and grooves on three sides allowingthe guide fastening, the sensors, brackets, stops mounting,or for junctions in case of > 6000 mm long guides.The GD series guide is positioned on the fourth side. It is equipped with carriage and belt clamping plate.• CarriageAnodized aluminium standard size plate, equipped with spindles with rollers and belt end clamping plate.• Drive BeltIt is a special toothed belt, AT type with 10 mm pitch (or AT type with5 mm pitch for the GDS guides). It is made of polyurethane, and reinforced with steel strands to increase its loading capacity. Additionally, slides with chain or rack type transmissions are available for particularly heavy applications.• Special ComponentisThe driven modules series GDM can also be equipped with:• Stainless steel shafts • Steel and custom designed carriages• Custom designed shafts for gearmotor assembly• Gearmotors adapter plates• Bellows• Production upon customer's specifications

12

.

Type DimensionsA B C E F G

GD 10AM 120 80 10 21 121 64GD 10BM 140 120 15 22 127 64GD 10CM 150 120 20 24 134 64GD 20AM 180 150 20 31 141 90GD 20BM 200 180 25 36.5 151.5 90

Table 7

Fig. 11

Fig. 12RMI-28FL (STM) 56 4 M5 90°RMI-40F1 (STM) 87 4 M8 90°

øDH7 14-19

Table 8

Driven Linear Systems Series GD10M-GD20M

Driven Linear Systems Series GD10M-GD20M The GDM Driven Linear Systems can be pre-set for gearmotor fitting, provided this has been specified on the order. Fig.11 and table 7 show the dimensions of the typologies. The standard gearmotors data, as well as the mounting holes diameters, quantity, pitch and positions are listed in Table 8. The transmission components data are listed, too. Fig.12 shows the dimensions of the supporting profile assembly points.

Gearm.type Manuf. diameter holes Pitch Positionøl

Belt AT10/16 AT10/25

Tension 2190 N load

Breaking 7480 N load

Motor Z20AT10-16/25 pulley

Pulley 200mm/revolution length

Belt tensioning range 14 mm

LT=200+B+Slide stroke+20 (for safety)LLT=200+B+Slide strokT=200+B+Slide stroke+20 (for safety)e+20 (for safety)

GEARMOTORGEARMOGEARMOTTOROR

SLID

ER M

8SL

IDER

M8

13

Type DimensionsA B K S T X Y

GD 10AMLT 120 80 11 - 80 10 12.5GD 10BMLT 140 120 17 2.5 85 10 12.5GD 10CMLT 150 120 24 7.5 92 15 12.5GD 20AMLT 180 150 21 67.5 100 15 22.5GD 20BMLT 200 180 31.5 77.5 110 14 22.5

Table 9

Fig. 13

Fig. 14

RMI-28FL (STM) 56 4 M5 90°RMI-40F1 (STM) 87 4 M8 90°

Table 10

Driven Linear Systems Series GD10MLT-GD20MLT

Driven Linear Systems Series GD10MLT-GD20MLTThe dimensions of the lateral driven slides are shown in Fig.13 and Table 9. The gearmotors types, the diameters, the mounting holes quantity, pitch and positions, as well as the transmission components data are shown in Table 10.Fig.14 shows the dimensions of the supporting profile mounting points.

Gearm.Type Manuf. diameter holes Pitch Positionøl

øDH7 14-19

Belt AT10/16 AT10/25

Tension 2190 N 3600 N load

Breaking 7480 N 12400 N load

Motor Z20AT10-16/25pulley

Pulley 200mm/revolution length

Belt tensioning range 14 mm

GD10M Side View

GD20M Side View





SLID

ER M

8SL

IDER

M8

14

Fig. 15

Table 11

Fig. 16

Table 12

Drive Belt Belt Motor Pulley Main Shaft Tensioning Standard Custom

Type Tension Load Breaking Load Range Type Length S Dh7 S Dh710AT5 630 N 1960 N 5mm Z22AT5 110mm/rev 40mm ø8 to specify

Carriage Rollers Limit Load (N) Static Moment (Nm)

Fr Fa My Mz MxC6 17C - 17E 570 330 15 25 20

LT=100+60+Slide stroke+20 (for safety)LLT=100+60+Slide strokT=100+60+Slide stroke+20 (for safety)e+20 (for safety)

Driven Linear Systems Series GD6M

Driven Linear Systems Series GD6MThe dimensions of the driven module GD6M are shown in Fig.15. Table 11 shows the drive belt loads, the belt tensioning range, the motor pulley length, and the standard dimensions of the main shaft (to be specified in case of custom designed main shaft).The static moments and maximum allowable loads for the carriage and the roller are listed in Fig.16 and Table 12.

15

Linear Modules Series ILThe linear modules series IL are especially suitable when smooth sliding in combination with high loading capacity and small dimensions are required. They are composed by an anodized aluminium extrusion within which the sliding bars are secured by means of rolling procedure.The carriage is integrated within the guide volume and is equipped with three gothic arch shaped in-line rollers.The central roller is mounted on an eccentric spindle to allow the carriage preloading.The main features are:

• Small dimensions• High translation speed• No maintenance required• Low noise level• Interchangeability• Easy installation•Compact applications

16

Fig. 17

Fig. 19

Fig. 18

Table 12

Linear Systems Series IL32

Guide Profile

Static Moments and Limit Loads

Components Limit Load (N) Static Moment (Nm) CarriageCarriage Rollers Fr Fa My Mz Mx Weight

kg)C32 RPC 17-RPE17 980 330 5,2 9 3,2 0.15

17

Fig. 20

Fig. 22

Fig. 21

Table 13

Guide Profile



Components Limit Load (N) Static Moment (Nm) CarriageCarriage Rollers Fr Fa My Mz Mx Weight

(kg)C42 RPC24-RPE24 1680 500 14,5 25 7,5 0.30

18

Fig. 23

Fig. 25

Fig. 24

Table 14


Guide Profile


Components Limit Load (N) Static Moment (Nm) CarriageCarriage Roller Fr Fa My Mz Mx Weight

(Kg)C65 RPC35-RPE35 3930 1160 44 76 25,5 0.80

19

Driven Linear Modules Series ILMThe driven linear modules series ILM are especially suitable when handling accuracy and compactness are required.The modules series ILM are composed by the following parts:

Driving HeadAnodized aluminium unit with leading sheave housing.

Idle HeadAnodized aluminium unit with loose pulley housing. The pulley is mounted on bearings and eccentric spindle for the belt tensioning.

Supporting ProfileIt is a special aluminium ribbed extrusion with an internal channel for the drive belt and grooves on three (two for the ILM32 type) sides

allowing the guide fastening, the sensors, brackets, stops mounting. The IL series guide is positioned on the profile upper side.

It is equipped with carriage and belt clamping plate.

Drive BeltIt is a special toothed belt, eithe AT type with 5 mm pitch (or AT type

with 10 mm pitch for the ILM65 guide). It is made of polyurethane and is reinforced with steel strands to increase its loading capacity.

Special ComponentsThe driven modules series ILM can also be equipped with:

• Stainless steel shafts• Steel and custom designed carriages• Custom designed shafts for gearmotor assembly• Gearmotors adapter plates• Production upon custom specifications

20

Fig. 26

Table 15

Table 16

Fig. 27

Driven Linear Modules Series ILM32

Drive belt Belt Motor Pulley Main ShaftType Tension Load Breaking Load Tensioning Standard Custom

Range Type Length S D S D

10AT5 630N 1960 N 5mm Z 22AT5 110mm/revol 40mm Ø8 To specify


Components Limit Load (N) Static Moment (Nm) Carriage Rollers Fr Fa My Mz Mx

C32M RPC 17-RPE17 980 330 5,2 9 3,2

LT=160+180+Slide stroke+20 (for safety)LLLT=160+180+Slide strokT=160+180+Slide stroke+20 (for safety)e+20 (for safety)

21

Fig. 28

Table 17

Fig. 29

Table 18

Driven Linear Systems Series ILM42

Drive belt Belt Motor Pulley Main ShaftType Tension Load Breaking Load Tensioning Standard Custom

Range Type Length S D S D

10AT5 630N 1960 N 5mm Z 32AT5 160mm/revol. 50mm Ø12 To specify



C42M RPC24-RPE24 1680 500 14,5 25 7,5

LT=160+180+Slide stroke+20 (for safety)LLLT=160+180+Slide strokT=160+180+Slide stroke+20 (for safety)e+20 (for safety)

22

45

Fig. 30

Table 19

Table 20

Fig. 31

Driven Linear Systems Series ILM65

Drive Belt Tensioning Motor Pulley Gearmotor Mounting HolesType Tension Load Belt Breaking Range ØI 56 4 holes M5 90° RMI 28 FL

Load Type Length 87 4 holes M8 90° RMI 40 F1

16AT10 2190N 7480 N 14mm Z 20AT10 200mm/revol ØD H7 14-19



C65M RPC35-RPE35 3930 1160 44 76 25,5

LT=200+210+Slide stroke+20 (for safety)LLT=200+210+Slide strokT=200+210+Slide stroke+20 (for safety)e+20 (for safety)

23

D

d1

Fig. 32

RPE35 IL-ILM65 3.1 15.9 2 12 11 44 10 20.6 35 0.75 5 10

Table 21

Rollers for Linear Systems IL-ILM The RPC and RPE type rollers for the IL-ILM system have gothic arch shaped rolling surface. Table 21 lists the rollers' dimensions and maximum allowable loads (see Fig.32)

Roller Guide Dimensions Axial Radial Type Type Load Load

A B S N P L M H D E e d1 Fa (N) Fr (N)RPC17 IL-ILM32 1.5 8 3 5 5.5 23 5 10.5 17 - 2.5 6

250 520RPE17 IL-ILM32 1.5 8 3 5 5.5 23 5 10.5 17 0.5 2.5 6

RPC24 IL-ILM42 1.8 11 2 6 7 27.8 8 14 24 - 4 6820 1590

RPE24 IL-ILM42 1.8 11 2 6 7 27.8 8 14 24 0.5 4 6

RPC35 IL-ILM65 3.1 15.9 2 12 11 44 10 20.6 35 - 5 101090 2390

24

Driven Linear Modules Series TLMThe driven linear modules Series TLM are used whenever highdegrees of accuracy, noise reduction and velocity are required in a handling system.The driven linear modules series TLM are composed by the following parts:

• Self-supporting profile• Carriage• Drive belt• Protection plate• Sliding system• Motor head• Idle head

• Supporting profileE’ It is a special aluminium alloy profile especially designed to integrate all the module components and to achieve high bending and torsion stability.Additionally, special grooves have been designed for the slide mounting or to be used for stops, proximity sensors, etc• CarriageAluminium made moving unit for sliding components (rollers, sliders, screws) housing.• Drive BeltIt is a special AT type toothed belt, with 5 mm pitch. It is made of polyurethane and reinforced with steel strands to increase its loading capacity. This type of belt allows:• High speed• Minimum wear• Low noise level• Positioning• High yield• Protection plateIt is a plastic strip mounted on the idle head motor. It slides within the carriage thus protecting the guide from dust and production wastes infiltrations.• Sliding systemVarious versions of the driven modules series TLM are available according to the required transmission:• TLM R - Gothic arch shaped rollers on chrome-plated hardened steel shafts• TLM G - Recirculating ball slides and sliders• TLM V - Recirculating balls slides and sliders with screws• Drive HeadAnodized aluminium unit with leading sheave and main shaft housing.• Idle HeadAnodized aluminium unit with idle pulley and tensioning systemhousing.

25

Fig. 33

Table 22

Table 23

Table 24

TLM65R TLM65G TLM65V TLM80R TLM80G TLM80V TLM105G TLM105V

mm 105 105 105 105 105 105 105 105

mm 5730 5730 2000 5670 5670 2000 7950 3500

m/s 2.5 4.5 - 2.5 4.5 - 5 -

16P5 16P5 25P5

AT5X36 AT5X36 AT5X50 AT5X50 AT5X50

34AT5 34AT5 37AT5 37AT5 28AT10

mm 170 170 185 185 280

kg 1.1 1.2 1.2 2.4 2.5 2.5 5.8 3.8

kg 3.4 3.6 2.8 6.2 6.4 3.6 12.6 4.8

kg 0.6 0.7 0.9 1.1 1.3 1.4 1.8 1.9

(N) static dynam static dynam static dynam static dynam static dynam static dynam static dynam static dynam

635 530 16500 3400 16500 3400 635 530 23400 4600 19000 4000 36400 7400 36400 7400

Moments TLM65R TLM65G TLM65V TLM80R TLM80G TLM80V TLM105G TLM105V (Nm) static dynam static dynam static dynam static dynam static dynam static dynam static dynam static dynam

Mz 42 42 380 82 380 82 84 84 740 160 500 115 1283 273 1283 273

My 26 24 445 92 445 92 52 48 860 178 550 120 1475 313 1475 313

Mx 16 13 68 15 68 15 32 26 118 25 118 25 201 42 201 42

Driven Linear Modules Series TLM 65-80

Technical Data Slide stroke min.length

Slide stroke max.length

Translation max.speed

Balls screw (standard)

Belt

Motor pulley

Pulley length for carriage mot.

Carriage Weight

Zero Stroke Weight

Weight for 100 mm slide stroke

Loads TLM65R TLM65G TLM65V TLM80R TLM80G TLM80V TLM105G TLM105V

26

Fig. 34

Driven Linear Module TLM65G Dimensions

LT=450+Slide stroke+20 (for safety)LLT=450+Slide strokT=450+Slide stroke+20 (for safety)e+20 (for safety)

ø14 with kø14 with key (max ø 19 upon demand)ey (max ø 19 upon demand)ø14 with kø14 with key (max ø 19 upon demand)ey (max ø 19 upon demand)

M6 Depth 10M6 Depth 10M6 Depth 10M6 Depth 10

COMPONENTSCOMPONENTSCOMPONENTSCOMPONENTS

CARRICARRIAAGEGECARRICARRIAAGEGE

EXTRUSIONEXTRUSIONEXTRUSIONEXTRUSION

RAILRAILRAILRAIL

BELBELTTBELBELTT

SLIDERSLIDERSLIDERSLIDER

BELBELTTBELBELTT

MOUNTING POINTSMOUNTING POINTSMOUNTING POINTS

Slid

ers

M6

Slid

ers

M6

27

Fig. 35

Driven Linear Module TLM65R Dimensions


ø14 with kø14 with key (max ø 19 upon demand)ey (max ø 19 upon demand)ø14 with kø14 with key (max ø 19 upon demand)ey (max ø 19 upon demand)



Slid

ers

M6

Slid

ers

M6


CARRIACARRIAGEGECARRIACARRIAGEGE

EXTRUSIONEXTRUSIONEXTRUSION

ROLLERROLLERROLLER BELTBELBELTT

BELTBELBELTT

SHAFTSSHAFTS

28

Fig. 36

Driven Linear Module TLM65V Dimensions



Slid

ers

M6

Slid

ers

M6




RAILRAILRAIL

SCREWSCREWSCREW

SLIDERSLIDERSLIDER

PLATEPLAPLATETE

LLT=220+Slide stroke+20 (for safety)T=220+Slide strokT=220+Slide stroke+20 (for safety)e+20 (for safety)

29

Fig. 37




Slid

ers

M6

Slid

ers

M6




BELTBELBELTT

BELTBELBELTT

RAILRAILRAIL

SLIDERSLIDERSLIDER

LLLT=540+Slide stro540+Slide strokke+20 (for safety)T=TT= e+20 (for safety)e+20 (for safety)e+20 (for safety)

ø19 with key (max ø25 upon demand)ø19 with kø19 with key (max ø25 upon demand)ey (max ø25 upon demand)

30

112

Fig. 38




Slid

ers

M6

Slid

ers

M6




ROLLERROLLERROLLER BELTBELBELTT

BELTBELBELTT

SHAFTSSHAFTS

LLLT=540+Slide stro540+Slide strokke+20 (for safety)T=TT= e+20 (for safety)e+20 (for safety)e+20 (for safety)

ø19 with key (max ø25 upon demand)ø19 with kø19 with key (max ø25 upon demand)ey (max ø25 upon demand)

31

Fig. 39




Slid

ers

M6

Slid

ers

M6




RAILRAILRAIL

SCREWSCREWSCREW

SLIDERSLIDERSLIDER

PLATEPLAPLATETE

L=265+Slide stroke+20 (for safety)L=265+Slide strokL=265+Slide stroke+20 (for safety)e+20 (for safety)

32

Fig. 40






BELTBELBELTT

RAILRAILRAIL

SLIDERSLIDERSLIDER


Ø24/25 WITH LOCKING SETØ24/25 WITH LOCKING SETØ24/25 WITH LOCKING SET

M8 Depth15M8 Depth15M8 Depth15

CURSOR M6CURSOR M6CURSOR M6

33

Fig. 41






BELTBELBELTT

RAILRAILRAIL

SCREWSCREWSCREW

SLIDERSLIDERSLIDER

M8 Depth15M8 Depth15M8 Depth15

CURSOR M6CURSOR M6CURSOR M6


34

Linear Tables series SLTLThe tables series SLTL are handling and positioning precision systems.They are composed by:

• Motor side head• Standing side head• Sliding carriage• Supporting and sliding shafts

Motor side headAnodized aluminium plate with slanted rollers housing and sliding bars clamps.

Standing side headAnodized aluminium plate with slanted rollers housing and sliding shafts clamps.

Sliding carriageAnodized aluminium sliding unit with housing for recirculating balls worm and axial bushing.

Supporting and sliding shaftsFTSN standard unit for carriage support and sliding. It is composed by aluminium extrusion and chrome-plated hardened shafts.

35

LT

Fig. 42

STL20-165 130 115 130 115 20 29 20 9 37 36 57 32 42 42 21 M8 6.6STL25-165 160 140 160 140 25 33 25 9 42 44 66 36 52 52 26 M10 6.6STL30-205 180 158 180 158 25 38 30 10 51 48 77 42 58 58 29 M12 9

Table 25

Table 26

Linear Tables series SLTL

Type A A1 B B1 C C1 D d E G H H1 H2 H3 H4 M mSTL16-124 100 88 100 88 18 24 16 5 33 27 48 26 32 32 16 M6 5.5

Type N O P S Screw Type Code Dynamic Load (N ) Static Load (N )STL16-124 12 5.3 100 16.5 Diam.12 pitch 4 RSB12-04B1 3440 5740STL20-165 18 6.7 100 25 Diam.16 pitch 5 FSI16-05T3 679 0 12270STL25-165 18 8.5 120 22.5 Diam.16 pitch 5 FSI16-05T3 679 0 12270STL30-205 18 10.3 150 24.5 Diam.20 pitch 5 FSI20-05T4 10010 21490

L= Slide stroke+A+20 (+bellows)L= Slide stroke+A+20 (+bellows)L= Slide stroke+A+20 (+bellows)

36

Fig. 43

F2 820 980 2000 2800 3670 5135 4600 6650F3 1500 2100 3680 5220 6585 9260 8340 12160

Table 27

My 34 125 265 378Mz 68 223 480 675

Table 28

Linear Tables series SLTL Static Moments and Limit Charges

Loads SLTL16 - 124 SLTL20 - 165 SLTL25 - 165 SLTL30 - 205(N) Dynamic Static Dynamic Static Dynamic Static Dynamic StaticF1 1800 2450 3600 5000 6585 9260 8340 12160

Loads SLTL16 - 124 SLTL20 - 165 SLTL25 - 165 SLTL30 - 205(Nm) Static Static Static StaticMx 28 104 230 320

37

Model

SLTL 15G 5 400 S

Linear Tables series SLTL-G

• Extremely accurate and rigid linear tables

• Tables made of Anodized aluminium (standard version) or Galvanized Steel (for heavy loads)

• Transmission by recirculating balls screw rolled with accuracy class 7

• Transmission by recirculating balls guides

• Bellow protection for screws and guides

HOW TO ORDER

S=standard table; H=table for heavy loads

Table length

Recirculating balls screw pitch: 5, 10

Table size: 15, 20, 25

38

A A1 B B1 C C1 D d E G G1 H

SLTL 15 G mm 120 100 125 105 25 8 60h7 10h7 110 55 55 60

SLTL 20 G mm 150 130 160 140 30 12 60h7 14h7 140 55 55 70

SLTL 25 G mm 180 160 180 160 30 12 60h7 14h7 160 55 55 80

Table 30H1 H2 M N P S S1 T T1 V V1

mm 60 30 6.5 25 80 M6 M6 60 5 25 5 5 10

SLTL 20 G mm 71 36 6.5 25 80 M6 M6 80 6 35 6

5

10

SLTL 25 G mm 85 40 6.5 40 100 M6 M8 100 6 50 6

5

10

Linear Tables series SLTL-G

Fig. 44

16

20

25

Table 29

Type

Type ScrewdiaScrew pitch

SLTL 15 G

LT= L+Slide stroke+2C1+2C+A+20(for safety)+bellowsLT= L+Slide stroke+2C1+2C+A+20(for safety)+bellowsLT= L+Slide stroke+2C1+2C+A+20(for safety)+bellows

M+CounterboreM+CounterboreM+Counterbore

39

12500 5600 18000 8400 24400 10500 36600 15800 38000 16300 57000 24400

F2 3100 1400 4500 2100 6100 2600 9100 3900 9500 4000 14200 6100

F3 2091 970 2091 970 3196 1360 3760 1600 5400 1880 5400 1880

Table 32

Nm

Mx 500 190 620 270 1310 560 1850 750 2000 800 2700 1100

My 150 90 150 90 470 290 470 290 880 490 880 490

Mz 130 60 130 60 400 200 400 200 700 305 700 305

Fig. 45

Linear Tables series SLTL-G Static Moments and Limit Loads

Table 31

Loads SLTL 15 G-S SLTL 15 G-H SLTL 20 G-S SLTL 20 G-H SLTL 25 G-S SLTL 25 G-H

N Static Dynamic Static Dynamic Static Dynamic Static Dynamic Static Dynamic Static Dynamic

F1

Loads SLTL 15 G-S SLTL 15 G-H SLTL 20 G-S SLTL 20 G-H SLTL 25 G-S SLTL 25 G-H

Static Dynamic Static Dynamic Static Dynamic Static Dynamic Static Dynamic Static Dynamic

40

Twin Linear Tables series GLO

• with ball bushings

• with friction bushings

G LO 1 K 2 20 - LS 1050

Complete unit

Carriage code

Carriage quantity

K = bushingsKB ..OPUUT = self-aligning bushingsTK ..OPUUU = bushings HIWINUB ..OPWWB = friction bushingsBAO

Support length (mm.)

Support code

Shafts diameter (mm.)

2 = 2 bushings4 = 4 bushings

41

Carriage type LO 220 Carriage type LO 420

Carriage LO 220LO 420

Support LS

Fig. 46

Fig. 47 Fig. 48

5598

48

110 98

48

Remarks: 1) The single section maximum length is 6000 mm. Upon demand, longer sections can be supplied.

2) The support and the standard carriages are supplied without mounting holes. Upon demand, these units can be supplied with drillings according to the Customer's design.

index [lplusl-linear.de]

Documents