india default parameters

8/8/2019 India Default Parameters

1/22

C Parameter name Unit Rec. Def Mumbai aharashtr

No of Preferred Cells (NPC)

MS distance behaviour (DISB)

HO preference order interference DL (HDL)

HO preference order interference UL (HUL)

Answer to paging call on FACCH (EPF)Call re-establishment on FACCH (ERF)

Emergency call on FACCH (EEF)

Ordinary call on FACCH (EOF)

TCH rate internal HO (HRI)

Lower limit for FR TCH resources (HRL)

Upper limit for FR TCH resources (HRU)

Variable DL Step Use, S9 (VDLS)

Territory Update Guard Time GPRS, S9 (GTUGT)


2/22

Gujarat Orissa Bihar

3

255

Inter-cell

Inter-cell

NoNo

No

No

Best candidate

30

70

No

5


3/22

Parameter name

Cell Access Parameters

Cell Barred (BAR)

Call Reestablishment Allowed (RE)

Emergency Call Restricted (EC)Power Offset (PO)

GPRS enabled, S9 (GENA)

plmn permitted

Cell Reselect Hysteresis (HYS)

Ms Tx Pwr Max Cch (TXP1)

Ms Tx Pwr Max Cch 1x00 (TXP2)

Rx Lev Access Min (RXP)

Radio Link Timeout (RLT)

Number of Blocks for AGCH (AG)

Number of MultiFrames (MFR)Timer Periodic Update MS (PER)

Allow IMSI Attach/Detach (ATT)

Queueing Parameters

Max Queue Length (MQL)

Time Limit Call (TLC)

Time Limit Handover (TLH)

MS Priority Used (MPU)

Queue Priority Used (QPU)

Queueing Priority Call (QPC)

Queueing Priority Handover (QPH)Queue Priority Non-urgent HO (QPN)

Diversity Used (RDIV)

DTX Mode (DTX)

BTS Measure Average (BMA)

MS Tx Power Max GSM (PMAX1)

MS Tx Power Max GSM 1800/1900 (PMAX2)

MS Tx Power Min (PMIN)

Max Number Retransmission (RET)

Max Number of Repetition (NY1)Number of Slot Spread Trans (SLO)

SMS CB used (CB)

BTS Load Threshold (BLT)

MS Max Distance in Call Setup (DMAX)

TCH Rate Intra Cell HO (TRIH)

Early Sending (ESI)

TRX Priority in TCH Alloc. (TRP)

Prefer BCCH TRXs in GPRS..., S9 (BFG)

Double BA-Lists Option

Idle State BCCH Allocation List Use

Identification of BCCH Frequency List (IDLE)


4/22

BCCH Allocation Usage for Active MS (ACT)

C2 Reselection Option

Cell Reselection Param. Index (PI)

Cell Bar Qualify (QUA)

Cell Reselect Offset (REO)Temporary Offset (TEO)

Penalty Time (PET)

Half Rate Option

Lower Limit for FR TCH Res. (FRL)

Upper Limit for FR TCH Res. (FRU)

Dual Band Option

Dual Band (DBC)

Multi Band Cell Reporting (MBR)

Directed Retry / Intelligent Directed Retry Option

Directed Retry used (DR)

Intelligent DR used (IDR)

DR method (DMR)

Max Time Limit DR (MADR)

Min Time Limit DR (MIDR)

Directed Retry Threshold

FACCH Call Setup Option

New Establ. Causes Support (NECI)

TRX Parameters

Optimum RX level uplink (BLEV)

Optimum RX level downlink, S9 (LEVD)


5/22

Recommended setting

No

No0

Yes

= Only allocated NCC's for that PLMN

6.0 dB

33.0 dBm for 900NW's

30.0 dBm for 1800NW's

To be decided after trial

20.0 SACCH

2

44.0 Hours

Yes

0.5

5.0 sec

5.0 sec

Yes

Yes

9

911

On

Shall

0 SACCH

33.0 dBm (GSM900)

30.0 dBm (GSM1800)

0.0 dBm

4

514

Yes

70

255

No constraints

Allowed

From BCCH TRX

No

BCCHs of adjacent cells

BA list used

Yes+MAX WAIT TIME FOR RE-ESTABREQ =15secs in all MSC's


6/22

BCCHs of adjacent cells

0

0

00.0 dBm

20.0 sec

0.1

0.3

No

1

Yes

No

Yes

6 sec

2 sec

-80 dBm

No

Not used

Not used


7/22


8/22


9/22

Parameter name Recommended setting Mumbai

POC General

Power Control Enabled (PENA) Yes Yes

Maximum Transmit Power (PMAX) (max- 0.0) dB (max- 0.0) dB

Minimum Transmit Power (PMIN) (max- 30.0) dB (max- 30.0) dB

Power Increasing Step Size (INC) 4.0 dB 6.0 dBPower Reducing Step Size (RED) 2.0 dB 2.0 dB

Power Control Interval (INT) 2.0 sec 2.0 sec

Power Decr Limit Band 0 (PD0) No change 19.0 dB



Power Decr Qual Factor (PDF) 1 1

ALA Enabled (AENA) No No

Power Limit ALA (ALIM) 10.0 dBm 10.0 dBm

Min Int between ALA (AMIN) 10.0 sec 10.0 sec

POC Averaging

PC Averaging Lev DL Wind Size (LDS) 4 4

PC Averaging Lev DL Weighting (LDW) 1 1

PC Averaging Lev UL Wind Size (LUS) 4 4

PC Averaging Lev UL Weighting (LUW) 2 2

PC Averaging Qual DL Wind Size (QDS 1 4

PC Averaging Qual DL Weighting (QD 1 1

PC Averaging Qual UL Wind Size (QUS 1 4

PC Averaging Qual UL Weighting (QU 2 2

POC ThresholdsPC Lower Thresholds Level DL Rx (LD -85.0 dBm -78.0 dBm

PC Lower Thresholds Level DL Px (LDP 1 1

PC Lower Thresholds Level DL Nx (LD 1 2

PC Upper Thresholds Level DL Rx (UD -70.0 dBm -70.0 dBm

PC Upper Thresholds Level DL Px (UD 1 1

PC Upper Thresholds Level DL Nx (UD 1 2

PC Lower Thresholds Level UL Rx (LUR -85.0 dBm -78.0 dBm

PC Lower Thresholds Level UL Px (LUP 1 1

PC Lower Thresholds Level UL Nx (LU 1 2

PC Upper Thresholds Level UL Rx (UU -70.0 dBm -70.0 dBmPC Upper Thresholds Level UL Px (UUP 1 1

PC Upper Thresholds Level UL Nx (UU 1 2

PC Lower Thresholds Qual DL Rx (LDR


10/22

PC Upper Thresholds Qual UL Px (UUP) 32 1

PC Upper Thresholds Qual UL Nx (UUN 32 1

PC Lower Threshold Qual 144 (LQR)


11/22

Maharashtra Gujarat Orissa Bihar

Yes Yes Yes Yes

(max- 0.0) dB (max- 0.0) dB (max- 0.0) dB (max- 0.0) dB

(max- 30.0) dB (max- 30.0) dB (max- 30.0) dB (max- 30.0) dB

4.0 dB 4.0 dB 4.0 dB 6.0 dB2.0 dB 2.0 dB 2.0 dB 2.0 dB

2.0 sec 2.0 sec 2.0 sec 2.0 sec

6.0 dB 12.0 dB 19.0 dB 19.0 dB

5.0 dB 10.0 dB 19.0 dB 19.0 dB

3.0 dB 6.0 dB 19.0 dB 19.0 dB

1 1 1 2

No No No No

6.0 dBm 6.0 dBm 6.0 dBm 6.0 dBm

10.0 sec 10.0 sec 10.0 sec 10.0 sec

4 4 4 4

1 1 1 1

4 4 4 4

1 2 1 2

1 4 1 4

1 1 1 1

1 4 1 4

1 2 1 2

-82.0 dBm -85.0 dBm -85.0 dBm -85.0 dBm

1 1 1 1

1 2 1 1

-74.0 dBm -70.0 dBm -70.0 dBm -70.0 dBm

1 1 1 1

1 2 1 1

-85.0 dBm -90.0 dBm -85.0 dBm -85.0 dBm

1 1 1 1

1 2 1 1

-75.0 dBm -75.0 dBm -70.0 dBm -70.0 dBm1 1 1 1

1 2 1 1


12/22

1 1 32 32

1 1 32 32


13/22

Parameter name Recommended setting

HO General

Min Int Between HO Req (MIH) 5.0 sec

Min Int Between Unsucc HO Att (MIU) 3.0 sec

HO Period Umbrella (HPU) 6.0 SACCH

HO Period PBDGT (HPP) 6.0 SACCHEnable Fast Ave Call Setup (EFA) No

Enable Fast Ave HO (EFH) No

Enable Fast Ave PC (EFP) No

Power budget HO (EPB) Yes

MS distance process (EMS) No

SDCCH HO (ESD) No

Umbrella HO (EUM) No

Intra Cell HO intf DL (EIH) Yes

Intra Cell HO intf UL (EIC) Yes

HO Averaging

HO Averaging Lev DL Wind Size (LDWS) 6

HO Averaging Lev DL Weighting (LDW) 1

HO Averaging Lev UL Wind Size (LUWS) 6

HO Averaging Lev UL Weighting (LUW) 2

HO Averaging Qual DL Wind Size (QDWS) 1

HO Averaging Qual DL Weighting (QDW) 1

HO Averaging Qual UL Wind Size (QUWS) 1

HO Averaging Qual UL Weighting (QUW) 2

HO ThresholdsHO Thresholds Lev DL Rx (LDR) -110/-90 dBm

HO Thresholds Lev DL Px (LDP) 1

HO Thresholds Lev DL Nx (LDN) 1

HO Thresholds Lev UL Rx (LUR) -110/-96 dBm

HO Thresholds Lev UL Px (LUP) 1

HO Thresholds Lev UL Nx (LUN) 1

HO Thresholds Qual DL Rx (QDR)


14/22

All Adjacent Cells Averaged (AAC) No

MS Distance Parameters

MS Dist Averag Par Wind Size (MSWS) 10

MS Dist Averag Thresholds Par (MSR) 63

Px (MSP) 1Nx (MSN) 1

Chained Cells in Rapid Field Drop Option

Count of Successuive Rapid Drop Thresholds (CNT 0

Threshold Level Uplink for Rapid Field Drop (RPD) -110.0 dBm

MS Speed Option

Threshold Nx (STN) 6

Threshold Px (STP) 3

Averaging (MSA) 4

Lower Speed Limit (LSL) Verifying not made

Upper Speed Limit (USL) Verifying not made

C/I Based HO Candidate Evaluation Option

C/I Estimation Method Not used

Enable Enhanced Rapid Field Drop (ERFD) No

Deep Dropping Edge Monitor Window (ERMW) 1 SACCH frames

Modified Averaging Window (ERAW) 2

Modified Number of Zero Results (ERZ) 1Enhanced Rapid Field Drop Duration (ERD) 9 sec

Adjacent Cell Parameters

Synchronization (SYNC) No

HO Priority Level (PRI) 3

Rx Level Minimum Cell (SL) -100 dBm

HO Margin Power Budget (PMGR) 6

HO Margin Level (LMGR) 3

HO Margin Quality (QMGR) 0

HO Level Umbrella (AUCL) -47 dBm

Enable HO Margin for Qual and Lev Yes

HO Load Factor (OF) 1

Optimisation of MS Power Level (POPT) Non Optimised

Chained Adjacent Cell (CHAIN) No

Threshold Target Level (TRHO) Not Used dBm

Fast Moving Threshold (FMT) 0

Adjacent Cell Layer (ACL) Not used


15/22

Mumbai Maharashtra Gujarat Orissa Bihar

5.0 sec 5.0 sec 5.0 sec 5.0 sec 5.0 sec

3.0 sec 3.0 sec 3.0 sec 3.0 sec 3.0 sec

6.0 SACCH 6.0 SACCH 6.0 SACCH 6.0 SACCH 6.0 SACCH

6.0 SACCH 6.0 SACCH 6.0 SACCH 6.0 SACCH 6.0 SACCHNo No No No No

No No No No No

No No No No No

Yes Yes Yes Yes Y

No No No No No

No No No No No

No No No No No

Yes No Yes Yes Y

Yes No Yes Yes Ye

4 6 4 4 4

1 1 1 1 1

4 6 4 4 4

2 1 2 1 2

3 1 3 1 1

1 1 1 1 1

3 1 3 1 1

2 1 2 1 2

-110.0 dBm -110.0 dBm -90.0 dBm -95.0 dBm -110.0 dBm

3 1 3 1 3

4 1 4 1 4


3 1 3 1 3

4 1 4 1 4


16/22

No No No No No

10 10 10 10 10

63 63 63 63 63

2 10 2 1 12 16 2 1 1

0 0 0 0 0


6 6 6 6 6

3 3 3 3 3

4 4 4 4 4

Verifying not madeVerifying not madeVerifying not madeVerifying not madeVerifying not made

erifying not made erifying not made erifying not made erifying not made erifying not made

Not used Not used Not used Not used Not used

No No No No No

2 SACCH frames 2 SACCH frames 2 SACCH frames 2 SACCH frames 2 SACCH frames

2 2 2 2 2

1 1 1 1 110 sec 10 sec 10 sec 10 sec 10 sec

No No No No No

3 3 3 3 3

-96 dBm -105 dBm -100 dBm -98 dBm -98 dBm

6 4 6 6 6

3 3 3 3 3

0 0 0 0 0

-47 dBm -47 dBm -47 dBm -47 dBm -47 dBm

Yes Yes Yes Yes Yes

1 1 1 1 1

Non Optimised Non Optimised Non Optimised Non Optimised Non Optimised

No No No No No

Not Used dBm Not Used dBm Not Used dBm Not Used dBm Not Used dBm

0 0 0 0 0

Not used Not used Not used Not used Not used


17/22


18/22


19/22

Parameter name Recommended setting

Cell Access Parameters

Cell Barred (BAR) No

Call Reestablishment Allowed (RE)

Emergency Call Restricted (EC) NoPower Offset (PO) 0

GPRS enabled, S9 (GENA) Yes

plmn permitted = Only allocated NCC's for that PLMN

Cell Reselect Hysteresis (HYS) 6.0 dB

Ms Tx Pwr Max Cch (TXP1) 33.0 dBm for 900NW's

Ms Tx Pwr Max Cch 1x00 (TXP2) 30.0 dBm for 1800NW's

Rx Lev Access Min (RXP) To be decided after trial

Radio Link Timeout (RLT) 20.0 SACCH

Number of Blocks for AGCH (AG) 2

Number of MultiFrames (MFR) 4

Timer Periodic Update MS (PER) 4.0 HoursAllow IMSI Attach/Detach (ATT) Yes

Queueing Parameters

Max Queue Length (MQL) 0.5

Time Limit Call (TLC) 5.0 sec

Time Limit Handover (TLH) 5.0 sec

MS Priority Used (MPU) Yes

Queue Priority Used (QPU) Yes

Queueing Priority Call (QPC) 9

Queueing Priority Handover (QPH) 9

Queue Priority Non-urgent HO (QPN) 11

Diversity Used (RDIV) On

DTX Mode (DTX) Shall

BTS Measure Average (BMA) 0 SACCH

MS Tx Power Max GSM (PMAX1) 33.0 dBm (GSM900)

MS Tx Power Max GSM 1800/1900 (PMAX2) 30.0 dBm (GSM1800)

MS Tx Power Min (PMIN) 0.0 dBm

Max Number Retransmission (RET) 4

Max Number of Repetition (NY1) 5

Number of Slot Spread Trans (SLO) 14

SMS CB used (CB) Yes

BTS Load Threshold (BLT) 70

MS Max Distance in Call Setup (DMAX) 255

TCH Rate Intra Cell HO (TRIH) No constraints

Early Sending (ESI) Allowed

TRX Priority in TCH Alloc. (TRP) From BCCH TRX

Prefer BCCH TRXs in GPRS..., S9 (BFG) No

Yes+MAX WAIT TIME FOR RE-ESTABREQ =15secs in all MSC's


20/22

Double BA-Lists Option

Idle State BCCH Allocation List Use BCCHs of adjacent cells

Identification of BCCH Frequency List (IDLE) BA list used

BCCH Allocation Usage for Active MS (ACT) BCCHs of adjacent cells

C2 Reselection Option

Cell Reselection Param. Index (PI) 0

Cell Bar Qualify (QUA) 0

Cell Reselect Offset (REO) 0

Temporary Offset (TEO) 0.0 dBm

Penalty Time (PET) 20.0 sec

Half Rate Option

Lower Limit for FR TCH Res. (FRL) 0.1

Upper Limit for FR TCH Res. (FRU) 0.3

Dual Band Option

Dual Band (DBC) No

Multi Band Cell Reporting (MBR) 1

Directed Retry / Intelligent Directed Retry Option

Directed Retry used (DR) Yes

Intelligent DR used (IDR) No

DR method (DMR) Yes

Max Time Limit DR (MADR) 6 sec

Min Time Limit DR (MIDR) 2 sec

Directed Retry Threshold -80 dBm

FACCH Call Setup Option

New Establ. Causes Support (NECI) No

TRX Parameters

Optimum RX level uplink (BLEV) Not used

Optimum RX level downlink, S9 (LEVD) Not used


21/22


22/22

india default parameters

Documents