industrial air toolslmb-industrial.com/catalogos/mpt/05-mpt-impact-flyer.pdf• cp-6060 • cp-0611...

8
MICHIGAN PNEUMATIC TOOL Impact Wrench 2016 MICHIGAN PNEUMATIC TOOL 1-800-521-8104 www.michiganpneumatic.com Heavy-Duty Industrial WRENCHES Serving All Industries Petro Chemical Construction Assembly Foundry Rental WRENCHES Industrial Air Tools

Upload: others

Post on 16-Mar-2021

2 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Industrial Air Toolslmb-industrial.com/catalogos/mpt/05-mpt-impact-flyer.pdf• CP-6060 • CP-0611 • CP-6120 *Call for other models not listed. 6 HV-3AMS Inlet Pressure - Total

MICHIGANPNEUMATIC TOOL

Impact Wrench 2016

MICHIGANPNEUMATIC TOOL

1-800-521-8104 • www.michiganpneumatic.com

Heavy-Duty Industrial

WRENCHES

Serving All Industries• Petro Chemical• Construction• Assembly• Foundry • Rental

WRENCHES

Industrial Air Tools

Page 2: Industrial Air Toolslmb-industrial.com/catalogos/mpt/05-mpt-impact-flyer.pdf• CP-6060 • CP-0611 • CP-6120 *Call for other models not listed. 6 HV-3AMS Inlet Pressure - Total

2

Features a friction ring anvil. Twin Hammer clutch mechanism provides gooddurability and performance. Excellent weight and balance to reduce operatorfatigue. High output motor provides high torque levels for removing nuts.Model MP-1700P2 with a 2" extended anvil also available.Model MP-1700PA with pin-type anvil also available.

Square Air Inlet Rec’d Avg. AirDrive Max Torque Free Speed Length Weight Thread Hose Size Consumption

1/2" 370 ft-lbs 6500 rpm 7" 5.3 lbs 1/4" 1/4" 23.8 cfm

MP-1700

MP-2660-6

MP-1700 Pistol Impact –– 1/2" Square Drive

The MP-2660 is the most powerful weight to torque ratio tool in our product line.This tool often replaces major brand name tools in the rental, heavy industrial andpetro chemical applications. Outstanding cost to performance ratio as well to helpyou gain market share.3 Position Bail/Hanger (#2660-HGR) also available.

Square Air Inlet Rec’d Avg. AirDrive Max Torque Free Speed Length Weight Thread Hose Size Consumption

3/4" 1100 ft-lbs 5500 rpm 9" 9.50 lbs 3/8" 1/2" 14-38 cfm

MP-2660 Pistol Impact –– 3/4" Square DriveMP-2660-6 6" Extended Anvil Impact –– 3/4" Square Drive

Features a twin hammer clutch for more power per pound, a pressure fed clutchlubrication system, two piece motor housing for easy maintenance, a built-inmuffler for low noise and direct drive for fast run down.

Square Air Inlet Rec’d Avg. AirDrive Max Torque Free Speed Length Weight Thread Hose Size Consumption

3/4",1" 1100 ft-lbs 5500 rpm 12.5" 12 lbs 3/8" 1/2" 38 cfm

MP-2920 Pistol Impact –– 3/4" Square DriveMP-2920-1 Pistol Impact –– 1" Square Drive

#2660-HGR

A powerful two-jaw clutch and steel clutch housing design offers power anddependability. Adjustable power regulator for forward-reverse control built in.

Square Air Inlet Rec’d Avg. AirDrive Max Torque Free Speed Length Weight Thread Hose Size Consumption

1100 ft-lbs 3000 rpm 12.5" 12 lbs 3/8" 1/2" 38 cfm

MP-6060 Pistol Impact –– 3/4" Square DriveMP-6060-1 Pistol Impact –– 1" Square DriveMP-6060-#4 Spline Pistol Impact –– #4 Spline Drive

Square Air Inlet Rec’d Avg. AirDrive Max Torque Free Speed Length Weight Thread Hose Size Consumption

1595 ft-lbs 5200 rpm 9.88" 13 lbs 3/8" 1/2" 15-45 cfm

MP-2925 Pistol Impact –– 3/4" Square DriveMP-2925-1 Pistol Impact –– 1" Square DriveMP-2925-#4 Spline Pistol Impact –– #4 Spline Drive

MP-2925

#2910-A526

MP-2660

3/4",1"#4 Spline

3/4",1"#4 Spline

Ergonomic handle and trigger make it easy for the operator to maneuver andactivate this impacting tool. Considered to be the most powerful 3/4" impact onthe market today. Ideal for rental, petro chemical, and heavy industry.Parts interchangeable with Ingersoll Rand IR-2925 series tool.#4 Spline Anvil #2910-A526

MP-2920

MP-6060

Page 3: Industrial Air Toolslmb-industrial.com/catalogos/mpt/05-mpt-impact-flyer.pdf• CP-6060 • CP-0611 • CP-6120 *Call for other models not listed. 6 HV-3AMS Inlet Pressure - Total

3

Heavy-Duty Impact WrenchesMP-1034EITH MP-1040EITH MP-1550EITH

Features a twin hammer clutch for more power per pound, a pressure fed clutch lubrication system, two piece motorhousing for easy maintenance, a built-in muffler for low noise and direct drive for fast run down. Parts are interchangeable with Ingersoll-Rand 2934, 2940 and 2950 series impact wrenches.

Max Free Air Inlet Rec’d Avg. AirModel No. Drive Torque Speed Handle Type Length Weight Thread Hose Size Consumption

MP-1034EITH 1" Sq. Through-Hole Inside TriggerMP-1034EOTH 1" Sq. Through-Hole Outside TriggerMP-1034EI5S #5 Spline Inside TriggerMP-1034EO5S #5 Spline Outside TriggerMP-1040EITH 1" Sq. Through-Hole Inside TriggerMP-1040EOTH 1" Sq. Through-Hole Outside TriggerMP-1034EI5S #5 Spline Inside TriggerMP-1040EO5S #5 Spline Outside TriggerMP-1550EITH 1-1/2" Sq. Through-Hole Inside TriggerMP-1550EOTH 1-1/2" Sq. Through-Hole Outside TriggerMP-1550EI5S #5 Spline Inside TriggerMP-1550EO5S #5 Spline Outside Trigger

Heavy-Duty Impact WrenchesFeatures a high energy per blow two jaw clutch, rugged steel clutch housing machined from bar stock, bronze alloyend plates for long motor life, a two piece housing for ease of maintenance, high power-to-weight ratio. Parts are interchangeable with Chicago Pneumatic 611 and 6120 series impact wrenches.

1100-1500ft-lbs

6600rpm 11-1/4" 19 lbs 1/2" 3/4" 47 cfm

22 lbs 1/2" 3/4" 58 cfm

14-1/2" 33 lbs 1/2" 3/4" 70 cfm

5000rpm

12-13/32"

3750rpm

1600-2000ft-lbs

2500-3000ft-lbs

Max Free Air Inlet Rec’d Avg. AirModel No. Drive Torque Speed Handle Type Length Weight Thread Hose Size Consumption

MP-1011EITH 1" Sq. Through-Hole Inside TriggerMP-1011EOTH 1" Sq. Through-Hole Outside TriggerMP-1011EI5S #5 Spline Inside TriggerMP-1011EO5S #5 Spline Outside Trigger

MP-1520EITH 1-1/2" Sq. Through-HoleMP-1520EI5S #5 Spline

1800-2800ft-lbs

6000rpm 12-1/2" 1/2" 3/4" 47 cfm

14-3/4" 1/2" 3/4" 60 cfm3000rpm

Inside Trigger

22.50lbs

33.75lbs

2500-3000ft-lbs

MP-1011EOTH MP-1520EITH

Page 4: Industrial Air Toolslmb-industrial.com/catalogos/mpt/05-mpt-impact-flyer.pdf• CP-6060 • CP-0611 • CP-6120 *Call for other models not listed. 6 HV-3AMS Inlet Pressure - Total

4

Extra Heavy-Duty Impact WrenchesFeatures through-hole anvil, lever throttle, reinforced hangers, heat treated hammer, anvil, cams. Designed to producean exceptionally high torque output. Effective for shipyards, bridge construction, building construction and heavymanufacturing plants. Time tested design for maximum durability.

*Ask your salesrepresentative aboutour variety of sockets

and other impactaccessories

Free Air Inlet Rec’d Avg. AirModel No. Drive Max Torque Speed Length Weight Thread Hose Size Consumption

MP-5980 1-1/2" Sq. Through-Hole 10,000 ft-lbs 830 rpm 23" 88 lbs 3/4" 1" 138 cfmMP-2588 2-1/2" Sq. Through-Hole 50,000 ft-lbs 355 rpm 26.63" 215 lbs 1" 1" 155 cfmMP-3599 3-1/2" Sq. Through-Hole 80,000 ft-lbs 295 rpm 37.5" 600 lbs 1-1/4" 1-1/2" 375 cfm

*All Extra Heavy-DutyImpacts come with a livehandle and dead handle

MP-2588

MP-3599

MP-5980

Page 5: Industrial Air Toolslmb-industrial.com/catalogos/mpt/05-mpt-impact-flyer.pdf• CP-6060 • CP-0611 • CP-6120 *Call for other models not listed. 6 HV-3AMS Inlet Pressure - Total

5

Repair and Tune Up Kits for most Industrial Models• IR-2920P• IR-2925P• IR-2934• IR-2940• IR-3940• IR-3942• IR-2945• IR-2950• CP-6060• CP-0611• CP-6120*Call for other models not listed

Page 6: Industrial Air Toolslmb-industrial.com/catalogos/mpt/05-mpt-impact-flyer.pdf• CP-6060 • CP-0611 • CP-6120 *Call for other models not listed. 6 HV-3AMS Inlet Pressure - Total

6

HV-3AMS

Inlet Pressure - Total Air Flow Inlet Pressure - Air Consumption

HV-3AM HV-6AM HV-8AM HV-10AM

HiVis Air MoversHiVis venturi style air movers are used in many industrial and construction sites where there is aneed to disperse hazardous fumes, move air into a confined space, cool individuals in elevatedtemperature conditions, or ventilate equipment and machinery with a blast of directed air.Common applications include shipyards, refineries, chemical plants, paper mills andmanhole ventilation.

• No moving parts• Minimal required maintenance• Can be used as a blower

or for exhaust• Safe in hazardous areas• Performance tested• Lightweight and portable

Overall Base Top of Horn Bolt Circle Base Slot Air InletModel No. Length Diameter Diameter Diameter Diameter Weight Thread

HV-3AMS 16.75" 7.31" 6.00" 6.56" 0.4" 5.8 lbs 1/2"HV-3AM 30.50" 7.31" 7.00" 6.56" 0.4" 8.5 lbs 1/2"HV-6AM 44.25" 11.25" 12.50" 10.50" 0.4" 20.9 lbs 1"HV-8AM 46.06" 14.37" 14.25" 13.62" 0.5" 38.9 lbs 1"HV-10AM 48.00" 17.00" 15.75" 15.50" 1.0" 40.8 lbs 1"

*Ground wires with clamp included.

Model No. 40 psig 60 psig 80 psig Model 40 psig 60 psig 80 psig

HV-3AMS 815 cfm 981 cfm 1182 cfm HV-3AMS 36 cfm 50 cfm 62 cfmHV-3AM 1017 cfm 1231 cfm 1462 cfm HV-3AM 35 cfm 45 cfm 62 cfmHV-6AM 2385 cfm 2885 cfm 3347 cfm HV-6AM 73 cfm 98 cfm 124 cfmHV-8AM 3152 cfm 4152 cfm 4929 cfm HV-8AM 114 cfm 152 cfm 193 cfmHV-10AM 4898 cfm 6182 cfm 7304 cfm HV-10AM 154 cfm 209 cfm 274 cfm

Page 7: Industrial Air Toolslmb-industrial.com/catalogos/mpt/05-mpt-impact-flyer.pdf• CP-6060 • CP-0611 • CP-6120 *Call for other models not listed. 6 HV-3AMS Inlet Pressure - Total

7

HV-Twin-PAK

HV-15G-8P

HV-6-PAK

Eliminate the clutter and run just one hose to yourworksite, and then connect up to eight pneumatictools at once. Equipped with a gauge to monitorworking pressure and a 200 psi pressure releasevalve to prevent excess pressure build up. Topand bottom brackets allow for easy stacking ormounting to skids or other surfaces. Connect orstack multiple manifolds to handle the busiestworksites.

Used in any industry with a need for multipleair outlets to supply various pneumatic toolssimultaneously. The 1-1/2" inlet can be dispersedthrough up to six separate outlets using CPcouplings. Each has a manual shut-off valveand moisture separator with auto drain valve,increasing tool life. Rugged steel tubular designwith tabs, can be rolled to the jobsite and allowsunit to be lifted and stacked.

Height Length Depth Weight

15" 29" 10" 32 lbs

InletDiameter Height Weight Size

36" 18" 175 lbs 1-1/2"

Number of Working Test Inlet Tank Width with3/4" Outlets Capacity Pressure Pressure Size Diameter Fittings Height Length Weight

8 15 gal 200 psi 300 psi 2" 12" 22-1/2" 16-1/2" 44" 72 lbs

Our HiVis Twin-PAK allows two operators to run tools simultaneously from one air supply. Portable, stackable and compact, it is designed to deliver clean, dry, lubricated air. 100% of visible moisture is removed and automatically purged by the integral S7F water filter which is virtually maintenance free. The integrated 1LF filter/lubricator combo filters air down to 40 microns, and the oiler has a 3.7oz capacity for extended use. As a bonus feature, an overflow safety valve will shut air off to both tools in the event of a connector breaking or hose being severed.

Page 8: Industrial Air Toolslmb-industrial.com/catalogos/mpt/05-mpt-impact-flyer.pdf• CP-6060 • CP-0611 • CP-6120 *Call for other models not listed. 6 HV-3AMS Inlet Pressure - Total

Supplemental ToolCatalog

Chipping Hammer& Rivet Busters

Winches & MaterialHandling

Construction Air Tools

Material Removal

MICHIGAN PNEUMATIC TOOLMICHIGAN PNEUMATIC TOOL

6850 Middlebelt Rd. • P.O. Box 906Romulus, MI 48174-7406

Copyright ©2016 Michigan Pneumatic® Tool, Inc.

Industrial Air Tools

011916Rev3DED