information procedure - agentura-cas.cz 2018_07...adapters for storz couplings, used to connect...
TRANSCRIPT
Information procedure Page 1
Monthly Notifications Register
Notifications registered at CCMC from 2018-07-01 to 2018-07-31
Register issued on : 2018-08-07
A list of subsectors can be found at the end of this document.
Information procedure Page 2
Monthly Notifications Register
Notifications registered at CCMC from 2018-07-01 to 2018-07-31
Sector A : SERVICES
Register issued on : 2018-08-07
Page 3Subsector A99: UNDETERMINED
Subsector : A99 Registration Date : 2018-07-19Organization : ASICountry : Austria
Project ID : 00027414/0001 Project Established
ICS : 03.100.01National Ref : ÖNORM S 2501Title : Diversity Management - General guideline on principles, systems and supporting
techniquesScope : The ÖNORM provides information and support on basic principles, systems and instruments
to integrate professional diversity management in profit- and non-profit organizations. It focuses on holistic and sustainable integration and inclusion of relevant internal and external stakeholders. The norm can be applied by any organization, regardless of its size, type, location, structure, core business, products or services.
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 4
Monthly Notifications Register
Notifications registered at CCMC from 2018-07-01 to 2018-07-31
Sector B : BUILDING AND CONSTRUCTION
Register issued on : 2018-08-07
Page 5Subsector B01: FIRE PROTECTION
Subsector : B01 Registration Date : 2018-07-30Organization : UNICountry : Italy
Project ID : 01604808/0001 Project Established
ICS : 13.220.20National Ref : UNI1604808Title : Initial verification and maintenance of automatic fire detection and fire alarm systemsScope : This standard describes the procedures for initial verification, surveillance, regular control
and maintenance of automatic fire detection and fire alarm systems.
Relatedness :National : REV/AMD UNI 11224:2011
Subsector : B01 Registration Date : 2018-07-26Organization : BDS Draft Issue Date : 2018-09-01Country : Bulgaria Latest Date for Comments : 2018-11-01
Project ID : BG001002/0001 Draft for public enquiry
ICS : 13.220.10National Ref : prBDS 2841-1Title : Fire couplings - Part 1: Storz couplings with sleevesScope : This document specifies technical requirements, including materials and performance of
Storz couplings for pressure hoses and suction pipes with rated pressure PN 1,6 MPa (16 bar), used to connect fire hoses and pipes for water-foam fire-fighting equipment. This document does not apply to couplings made of copper-zinc alloy according to BDS EN 12420 or corrosion-resistant steel according to BDS EN 10283.
Relatedness :National : REV/AMD BDS 2841:1986
Subsector : B01 Registration Date : 2018-07-26Organization : BDS Draft Issue Date : 2018-09-01Country : Bulgaria Latest Date for Comments : 2018-11-01
Project ID : BG001003/0001 Draft for public enquiry
ICS : 13.220.10National Ref : prBDS 2841-2Title : Fire couplings - Part 2: Storz couplings with internal threadScope : This document specifies technical requirements including materials and performance of
Storz couplings with internal threads for pressure hoses and suction pipes used by fire departments for quick and tight connection of fire hoses and pipes for water-foam fire-fighting equipment. This document does not apply to couplings made of copper-zinc alloy according to BDS EN 12420 or corrosion-resistant steel according to BDS EN 10283.
Relatedness :National : REV/AMD BDS 2841:1986
Subsector : B01 Registration Date : 2018-07-26Organization : BDS Draft Issue Date : 2018-09-01Country : Bulgaria Latest Date for Comments : 2018-11-01
Page 6
Project ID : BG001004/0001 Draft for public enquiry
ICS : 13.220.10National Ref : prBDS 2841-3Title : Fire couplings - Part 3: Caps for Storz couplings Scope : This document specifies technical requirements, including materials and performance of
caps for Storz couplings used to close and protect fire-extinguishing equipment and fire pumps as well as pressure hoses and suction tubes. This document does not apply to caps made of copper-zinc alloy according to BDS EN 12420 or corrosion-resistant steel according to BDS EN 10283.
Relatedness :National : REV/AMD BDS 2841:1986
Subsector : B01 Registration Date : 2018-07-26Organization : BDS Draft Issue Date : 2018-09-01Country : Bulgaria Latest Date for Comments : 2018-11-01
Project ID : BG001005/0001 Draft for public enquiry
ICS : 13.220.10National Ref : prBDS 2841-4Title : Fire couplings - Part 4: Adapters for Storz couplings Scope : This document specifies technical requirements, including materials and performance of
adapters for Storz couplings, used to connect hoses with different diameters and to attach to fire equipment. This document does not apply to adapters made of copper-zinc alloy according to BDS EN 12420 or corrosion-resistant steel according to BDS EN 10283.
Relatedness :National : REV/AMD BDS 2841:1986
** End of Subsector **
Subsector B02: STRUCTURES
Subsector : B02 Registration Date : 2018-07-25Organization : UNMZ Draft Issue Date : 2018-07-24Country : Czech Republic Latest Date for Comments : 2018-08-10
Project ID : 73004414/0002 Published Standard
ICS :National Ref :Title : Filling StationScope : This standard sets out criteria for the location of petrol stations (PS) and hygienic, technical
and technological criteria for designing new MS and for changes to existing PS. This standard applies to MS fuel and filling stations of liquefied petroleum gas which is part of, or in the vicinity of, the liquefied petroleum gas. This standard applies to filling station H2. This standard applies to filling stations and multi-product clusters for the sale and delivery of compressed natural gas (CNG), which are part of fuel filling stations. This standard applies to the charging stations of electric vehicles that are part of fuel filling stations according to 3.1.1. For stand-alone charging stations, this standard does not apply.
Relatedness :National : REV/AMD CSN 73 6060 (2006)
Page 7
Subsector : B02 Registration Date : 2018-07-31Organization : UNMZ Draft Issue Date : 2018-06-01Country : Czech Republic Latest Date for Comments : 2018-08-10
Project ID : 73004815/0001 Published Standard
ICS :National Ref :Title : Energy performance of buildings – Typical values for calculation – Part 1: GeneralScope : This standard contains in the annexes informative parameters for:
- Typical values and ranges of specified performance parameters of building technical systems; - Typical profiles of different types of buildings and operations (operating hours, ventilation, lighting and hot water requirements, internal heat loads from equipment); - Climate data for calculating the energy performance of buildings in the Czech Republic by the monthly calculation step; - the definition of the concept of the energy-related area..
Relatedness :National : REV/AMD TNI 73 0331 (2013)
** End of Subsector **
Subsector B03: CONCRETE
Subsector : B03 Registration Date : 2018-07-19Organization : ASICountry : Austria
Project ID : 00027417/0001 Project Established
ICS : 91.100.30National Ref : ONR 23339Title : Rules for the implementation of the Principles of the Equivalent Concrete Performance
ConceptScope : The ONR for the implementation of the concept of equivalent concrete Performance -
according to section 5.2.5.3 of ÖNORM B 4710-1: 2018 should contain rules for the application of the concept mentioned. Here, specifications for the quality assurance with regard to aptitude test, conformity assessment and identity verification are to be made.
Relatedness :National : New
** End of Subsector **
Subsector B09: THERMAL MATTERS
Subsector : B09 Registration Date : 2018-07-30Organization : UNICountry : Italy
Project ID : 01604774/0001 Project Established
ICS : 91.100.60National Ref : UNI1604774Title : Thermal insulating for building applications. Guidelines on performance characteristics,
mode of use and installation.Scope : The document defines guidelines to help building operators to check if insulation materials
have the needed performances and to provide them with correct and clear informations on
Page 8
the use of thermal insulating materials during the management at building site and installation. The document aims to provide building companies, designers, public administrations and all the technicians involved in the building process with the necessary indications, depending on the application, the choice and the use of thermal insulating products. In fact, thermal insulating products play a key role in the construction of buildings with low energy consumption (for example to achieve nearly zero-energy level, in new or refurbished buidings). The aim is that performances will be maintained at technical data sheets levels and that building operators will follow the correct safety advices.
Relatedness :National : New
Subsector : B09 Registration Date : 2018-07-09Organization : SNV Draft Issue Date : 2018-07-02Country : Switzerland Latest Date for Comments : 2018-09-30
Project ID : CH180008/0001 Draft for public enquiry
ICS : 91.140.30National Ref : prSIA 2044Title : Air-conditionedbuildings-
StandardcalculationmethodforthePower and energy requirements
Relatedness :National : REV/AMD SIA 2044:2011
** End of Subsector **
Subsector B19: CERAMIC TILES
Subsector : B19 Registration Date : 2018-07-18Organization : UNMZ Draft Issue Date : 2018-05-30Country : Czech Republic Latest Date for Comments : 2018-07-30
Project ID : 73005617/0001 Draft for public enquiry
ICS :National Ref :Title : General rules for the design and installation of ceramic tiles – Part 1: Guidelines for
design, installation, maintenance and evaluationScope : The aim of the revision is obsolete standarts for ceramic tiles
Relatedness :National : REV/AMD ČSN 73 3450 (1978)
** End of Subsector **
Subsector B26: ROAD BUILDING AND MAINTENANCE
Subsector : B26 Registration Date : 2018-07-18Organization : UNMZ Draft Issue Date : 2018-07-30
Page 9
Country : Czech Republic Latest Date for Comments : 2018-10-30
Project ID : 73005818/0001 Project Established
ICS :National Ref :Title : Road Building - Hydraulically Bound Mixture Courses - Part 3: Roller Compacted
Concrete (RCC)Scope : Purpose of this new standard is to set requirements for roller compacted concrete in the
Czech Republic.
Relatedness :National : REV/AMD ČSN 73 6124-3 (a new one)
Subsector : B26 Registration Date : 2018-07-18Organization : UNMZ Draft Issue Date : 2018-07-30Country : Czech Republic Latest Date for Comments : 2018-09-30
Project ID : 73005918/0001 Project Established
ICS :National Ref :Title : Road building - Slurry surfacingScope : The aim of the revision is up-dating of requirements contained in ČSN 73 6130:2016
according to a contemporary legislation.
Relatedness :National : REV/AMD ČSN 73 6130 (2016)
Subsector : B26 Registration Date : 2018-07-18Organization : UNMZ Draft Issue Date : 2018-07-30Country : Czech Republic Latest Date for Comments : 2018-09-30
Project ID : 73006018/0001 Project Established
ICS :National Ref :Title : Road building - Sprayed technologies and surface dressingsScope : The aim of the revision is up-dating of requirements contained in ČSN 73 6129:2016
according to a contemporary legislation.
Relatedness :National : REV/AMD ČSN 73 6129 (2016)
** End of Subsector **
Subsector B32: PRECAST CONCRETE PRODUCTS
Subsector : B32 Registration Date : 2018-07-26Organization : BDSCountry : Bulgaria
Project ID : BG005011/0001 Project Established
ICS : 91.100.30National Ref : prBDS 4983Title : Reinforced concrete elements for prefabricated structures. Test methods for assessment
of load bearing capacity, deformability and crack resistance
Page 10
Scope : This standard deals with test methods of precast concrete products of prestressed or reinforced common and lightweight aggregate concrete, and for their assessment regarding load bearing capacity, deformability and crack resistance. This standard is intended for use at testing beyond the scope of Bulgarian or European standards and in addition to standardized test methods as long as it does not contradict them. The standard does not deal with elements subjected to dynamic effects or frequently repetitive loads and with testing of already assembled elements in prefabricated buildings and facilities.
Relatedness :National : REV/AMD BDS 4983:1986
** End of Subsector **
Subsector B34: BUILDING AND CONSTRUCTION ENVIRONMENTAL ASPECTS
Subsector : B34 Registration Date : 2018-07-11Organization : UNMS SRCountry : Slovakia
Project ID : 73804918/0001 Project Established
ICS : 91.120.10National Ref : STN 73 0540-2Title : Thermal protection of buildings – Thermal performance of buildings and components –
Part 2: Functional requirementsScope : Requirements for the thermal and technical properties of building structures and buildings,
building heat requirements for different levels of construction (energy-efficient buildings, low-energy and ultra-low-energy buildings, nearly zero energy buildings) and building categories are the subject of the document.
Relatedness :National : REV/AMD STN 73 0540-2: 2012
Subsector : B34 Registration Date : 2018-07-30Organization : UNMZCountry : Czech Republic
Project ID : 75001217/0001 Draft for public enquiry
ICS :National Ref :Title : Torrent and gully control - Part 2: Structures for torrent and gully control
Relatedness :National : New
Subsector : B34 Registration Date : 2018-07-09Organization : SNV Draft Issue Date : 2018-07-03Country : Switzerland Latest Date for Comments : 2018-09-30
Project ID : CH180007/0001 Draft for public enquiry
ICS : 91.120.10National Ref : prSIA 2032Title : Gray energy - Life cycle assessment for the construction of buildings
Relatedness :
Page 11
National : REV/AMD SIA 2032:2010
** End of Subsector **
** End of Sector **
Information procedure Page 12
Monthly Notifications Register
Notifications registered at CCMC from 2018-07-01 to 2018-07-31
Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS
Register issued on : 2018-08-07
Page 13Subsector C01: Food products
Subsector : C01 Registration Date : 2018-07-23Organization : DINCountry : Germany
Project ID : 05702090/0001 Project Established
ICS :National Ref : 05702090Title : Determination of surface colony count on fitment and utensils in foodareas - Part 2:
Semiquantitative swab method
Relatedness :National : New
Subsector : C01 Registration Date : 2018-07-23Organization : DINCountry : Germany
Project ID : 05702091/0001 Project Established
ICS :National Ref : 05702091Title : Determination of surface colony count on fitment and utensils in foodareas - Part 1:
Quantitative swab method
Relatedness :National : New
Subsector : C01 Registration Date : 2018-07-23Organization : DINCountry : Germany
Project ID : 05702092/0001 Project Established
ICS :National Ref : 05702092Title : Determination of surface colony count on fitment and utensils in foodareas - Part 3:
Semiquantitative method with culture media laminated taking up equipment (squeeze method)
Relatedness :National : New
** End of Subsector **
Subsector C13: FERTILIZERS
Subsector : C13 Registration Date : 2018-07-30Organization : UNMZCountry : Czech Republic
Project ID : 46000618/0001 Draft for public enquiry
ICS :National Ref :Title : Vermicompost
Relatedness :
Page 14
National : New
** End of Subsector **
** End of Sector **
Information procedure Page 15
Monthly Notifications Register
Notifications registered at CCMC from 2018-07-01 to 2018-07-31
Sector F : FUNDAMENTAL STANDARDS
Register issued on : 2018-08-07
Page 16Subsector F21: VALUE ANALYSIS AND PROJECT NETWORK
Subsector : F21 Registration Date : 2018-07-19Organization : EVSCountry : Estonia
Project ID : 00100073/0001 Project Established
ICS :03.060, 03.080, 91.040, 93.010
National Ref : prEVS 875-10Title : Property valuation - Part 10: Data collection and analysis, property inspectionScope : This standard applies to data collection and analysis in valuation activities and property
inspection.
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 17
Monthly Notifications Register
Notifications registered at CCMC from 2018-07-01 to 2018-07-31
Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE
Register issued on : 2018-08-07
Page 18Subsector H23: LADDERS
Subsector : H23 Registration Date : 2018-07-23Organization : DINCountry : Germany
Project ID : 04201010/0001 Project Established
ICS : 97.145National Ref : DIN 4567-2Title : Ladders for special professional use - Part 2: Ladders for window cleaning made of wood
or aluminium
Relatedness :National : New
Subsector : H23 Registration Date : 2018-07-23Organization : DINCountry : Germany
Project ID : 04201011/0001 Project Established
ICS : 97.145National Ref : DIN 4567-3Title : Ladders for special professional use - Part 3: Ladders for building sites
Relatedness :National : New
Subsector : H23 Registration Date : 2018-07-23Organization : DINCountry : Germany
Project ID : 04201012/0001 Project Established
ICS : 97.145National Ref : DIN 4567-4Title : Ladders for special professional use - Part 4: Non stationary roof ladders made of wood
or aluminium
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 19
Monthly Notifications Register
Notifications registered at CCMC from 2018-07-01 to 2018-07-31
Sector I : MECHANICAL ENGINEERING
Register issued on : 2018-08-07
Page 20Subsector I19: NUCLEAR ENERGY
Subsector : I19 Registration Date : 2018-07-30Organization : UNICountry : Italy
Project ID : 01604803/0001 Project Established
ICS : 01.040.13, 13.280National Ref : UNI1604803Title : Decommissioning/dismantling of nuclear plants and facilities, radioactive waste
management and disposal. DictionaryScope : This intended dictionary will provide an overall collection of the technical terminologies
already used or to be used within documents and reports concerning activities of decommissioning, decontamination and dismantling of nuclear plants and facilities, as well as management and temporary/final disposal of spent fuel and radioactive waste as generated by such processes, there included the implementation, test, exercise and maintenance of the repository. The document takes up and updates existing terms and adds/completes new terms and meanings.
Relatedness :National : New
** End of Subsector **
Subsector I40: INDUSTRIAL PIPING NETWORKS
Subsector : I40 Registration Date : 2018-07-27Organization : LVS Draft Issue Date : 2018-08-02Country : Latvia Latest Date for Comments : 2018-09-03
Project ID : 00058782/0001 Project Established
ICS : 91.140.40National Ref : LVS 445-1/prA3Title : Operation and maintenance of natural gas distribution and consumer supply systems with
max.operaton pressure 1,6 MPa (16 bar). Part 1: General requirementsScope : This standard establishes general requirements for legal and physical persons performing
adjustment, technical maintenance and repair of natural gas distribution system, installation pipework and gas appliances with working pressure up to 1,6 Mpa
Relatedness :National : REV/AMD LVS 445-1
** End of Subsector **
** End of Sector **
Information procedure Page 21
Monthly Notifications Register
Notifications registered at CCMC from 2018-07-01 to 2018-07-31
Sector M : METALLIC MATERIALS
Register issued on : 2018-08-07
Page 22Subsector M04: COPPER
Subsector : M04 Registration Date : 2018-07-30Organization : NBNCountry : Belgium
Project ID : BE664065/0001 Project Established
ICS : 23.040.40National Ref : prNBN P 12-001Title : Copper and copper alloys - Fittings for sanitary, heating and gas installations - Fittings
with press ends for metallic tubes
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 23
Monthly Notifications Register
Notifications registered at CCMC from 2018-07-01 to 2018-07-31
Sector N : NON-METALLIC MATERIALS
Register issued on : 2018-08-07
Page 24Subsector N02: SOLID FUELS
Subsector : N02 Registration Date : 2018-07-30Organization : UNICountry : Italy
Project ID : 01604704/0001 Project Established
ICS : 27.190, 75.160.10National Ref : UNI1604704Title : Solid biofuels - Fuel specifications and classes - Additional graded non-woody and wood
briquettes to UNI EN ISO 17225-3 and UNI EN ISO 17225-7.Scope : This Technical Specification determines some additional fuel quality classes and
specifications of graded non-woody and wood briquettes to UNI EN ISO 17225-3 and UNI EN ISO 17225-7. This Technical Specification covers solid biomass listed in the table 1 of UNI EN ISO 17225-1.
Relatedness :National : New
** End of Subsector **
Subsector N03: PETROLEUM PRODUCTS
Subsector : N03 Registration Date : 2018-07-23Organization : DINCountry : Germany
Project ID : 06235438/0001 Project Established
ICS :National Ref : 06235438Title : Testing of mineral oil hydrocarbons and similar liquids - Determination of the grade of
purity by gas-chromatography - n-Heptane, iso-octane and toluene
Relatedness :National : New
** End of Subsector **
Subsector N07: SAWN TIMBER
Subsector : N07 Registration Date : 2018-07-30Organization : UNICountry : Italy
Project ID : 01604719/0001 Project Established
ICS : 79.040National Ref : UNI1604719Title : Wood for non-structural use - Test method for the determination of the modulus of
elasticity in compressionScope : This standard describes a test method to determine the modulus of elasticity in compression
on small size wood test pieces without defects.
Relatedness :National : REV/AMD UNI 3261:2011
Subsector : N07 Registration Date : 2018-07-30
Page 25
Organization : UNICountry : Italy
Project ID : 01604720/0001 Project Established
ICS : 79.040National Ref : UNI1604720Title : Wood for non-structural use - Test method for the determination of the modulus of
elasticity in tensionScope : This standard describes a test method to determine the modulus of elasticity in tension on
small size wood test pieces without defects.
Relatedness :National : REV/AMD UNI 3263:2011
Subsector : N07 Registration Date : 2018-07-30Organization : UNICountry : Italy
Project ID : 01604721/0001 Project Established
ICS : 79.040National Ref : UNI1604721Title : Wood for non-structural use - Test method for the determination of the split resistance in
the axial directionScope : This standard describes a test method to determine the split resistance in the axial direction
on small size wood test pieces without defects.
Relatedness :National : REV/AMD UNI 4143:2011
** End of Subsector **
** End of Sector **
Information procedure Page 26
Monthly Notifications Register
Notifications registered at CCMC from 2018-07-01 to 2018-07-31
Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT
Register issued on : 2018-08-07
Page 27Subsector S09: WATER QUALITY AND WATER SUPPLY
Subsector : S09 Registration Date : 2018-07-18Organization : UNMZ Draft Issue Date : 2018-07-30Country : Czech Republic Latest Date for Comments : 2018-10-30
Project ID : 75001718/0001 Project Established
ICS :National Ref :Title : Calculation of water installations inside buildingsScope : The aim of the amendment Z1 is unification of contemporary legislation. Use of new
information in this area.
Relatedness :National : REV/AMD Amendment Z1 of ČSN 75 5455 (2014)
** End of Subsector **
Subsector S16: AIDS FOR THE DISABLED
Subsector : S16 Registration Date : 2018-07-19Organization : ASICountry : Austria
Project ID : 00027415/0001 Project Established
ICS : 11.180.30National Ref : ÖNORM V 2103Title : Technical aids for visually impaired and blind persons - Additional activation options for
acoustic signals and informationScope : This ÖNORM is to be applied for portable facilities such as transmitters RFID chips, the Euro-
Key or smartphone applications for activation of acoustic signals or to demand acoustic information in public space (in- and outdoors).
Relatedness :National : New
** End of Subsector **
Subsector S99: UNDETERMINED
Subsector : S99 Registration Date : 2018-07-19Organization : ASICountry : Austria
Project ID : 00027416/0001 Project Established
ICS : 13.100National Ref : ÖNORM ISO 45001Title : Occupational health and safety management systems -- Requirements with guidance for
useScope : This document specifies requirements for an occupational health and safety (OH-S)
management system, and gives guidance for its use, to enable organizations to provide safe and healthy workplaces, by preventing work-related injury and ill health, as well as by proactively improving its OH-S performance. This document is applicable to any organization that wishes to establish, implement and maintain an OH-S management system to improve occupational health and safety, eliminate hazards and minimize OH-S risks (including system deficiencies), take advantage of OH-S opportunities, and address OH-S management system nonconformities associated with its
Page 28
activities. This document helps an organization to achieve the intended outcomes of its OH-S management system. Consistent with the organizations OH-S policy, the intended outcomes of an OH-S management system include: a) continual improvement of OH-S performance; b) fulfilment of legal requirements and other requirements; c) achievement of OH-S objectives.
Relatedness :National : New
Subsector : S99 Registration Date : 2018-07-10Organization : SIS Draft Issue Date : 2018-07-10Country : Sweden Latest Date for Comments : 2018-09-10
Project ID : 00199000/0002 Project Established
ICS : 13.020National Ref : 199000Title : Biodiversity survey - Implementation, assessment and reportingScope : This standard covers specification, implementation and accounting of biodiversity surveys. It
specifies minimum demands for identifying, delimiting and assessing geographic areas of importance for biodiversity. This standard sets the minimum requirements for what shall be included in biodiversity surveys. As long as it is compatible with these requirements, further aspects may be covered and a more detailed account will be made. This standard applies to all natural habitats, whether they are terrestrial, limnian or marine.
Relatedness :National : New
Subsector : S99 Registration Date : 2018-07-10Organization : SIS Draft Issue Date : 2018-07-10Country : Sweden Latest Date for Comments : 2018-09-10
Project ID : 00199001/0001 Project Established
ICS : 13.020National Ref : 199001Title : Biodiversity survey - Complement to SS 199000Scope : This technical report complements SS 199000, Biodiversity survey - Implementation,
assessment and reporting. It contains information to be used as support for the implementation of a biodiversity survey. This technical report provides guidance for determining the appropriate level for biodiversity surveys to be performed, such as level of detail and additions that may be required.
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 29
Monthly Notifications Register
Notifications registered at CCMC from 2018-07-01 to 2018-07-31
Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING
Register issued on : 2018-08-07
Page 30Subsector T19: ROAD SAFETY
Subsector : T19 Registration Date : 2018-07-18Organization : UNMZ Draft Issue Date : 2018-08-30Country : Czech Republic Latest Date for Comments : 2018-11-30
Project ID : 73001718/0001 Project Established
ICS :National Ref :Title : Requirements for road marking materials and for road markings Scope : The aim of the new standard is to transfer the national annex from ČSN EN 1436 into this
standard.
Relatedness :National : REV/AMD ČSN 73 7010 (a new one)
** End of Subsector **
Subsector T20: TRAM- AND RAILWAY ENGINEERING
Subsector : T20 Registration Date : 2018-07-18Organization : PKNCountry : Poland
Project ID : 13801372/0001 Project Established
ICS : 17.040.01National Ref : prPN-C-99221Title : Railway applications -- Registration materials -- Registration paper for tachographsScope : This standard sets requirements and test methods for registration paper for tachographs,
paper marking, labeling and packing as well as storage and transport conditions. Standard gives the definition of registration paper for tachographs used for railway purpose and classification in relation to the range of traction unit speed being registered
Relatedness :National : New
** End of Subsector **
** End of Sector **
2011-06
List of non-electrotechnical subsectors
Sector A: Services
Subsector Title ISO/TC CEN/TC
reference reference
A01 Tourist services / 329; CEN/WS ETO
A02 Cleaning services / 328
A03 Postal services / 331
A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM
A05 Maintenance services / 319
A06 Building and construction services / 330
A07 Translation services /
A08 Funeral services / CEN/BT/TF 139
A09 Facility management / 348
A10 Services of Real Estate Agents / CEN/BT/TF 180; 373
A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4
A12 Consultancy Services / 395; 381
A13 Expertise Services / 405
A14 Aesthetic Services / 403;409
A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404
Sector B: Building and construction
Subsector Title ISO/TC CEN/TC
reference reference
B01 Fire protection 21 70; 72; 191; 192
B02 Structures 59; 98 166; 167; 250; 277; 346; 349; 284; 288; 297; 340
B03 Concrete 71 104; CEN/WS 009
B04 Cement 74; 77 51
B05 Fire tests 92 127
B06 Gypsum / 241
B07 Glass 160 129
B08 Doors and windows 162 33
B09 Thermal matters 163 88; 89; 371; CEN/BT WG 173; CEN/WS 036
B10 Timber structures 165 124
B11 Metal structures 167 135
B12 Masonry 179; 196 125; 246
B13 Solar energy 180 312
B14 Geotechnics 182 341; 396
B15 Sanitary appliances / 163; 7
B16 Taps / /
B17 Lighting equipment and lighting / 50; 169 application technology
B18 Scaffolding / 53
B19 Ceramic tiles 189 67
B20 Drainage equipment / 165
B21 Baths / /
B22 Wallcoverings / 99
B23 District heating / 107
B24 Auxiliary and handicraft work / /
B25 Gas distribution installation and / 234; 235; 282 related equipment
B26 Road building and maintenance / 178; 227
B27 Waterproofing materials / 128; 254; 361; 314
B28 Floor coverings 38/SC 12 134
B29 Aggregates / 154
B30 Floor and surfacing / 217; 303; 323; 390
B31 Heating systems in buildings / 228; 247
B32 Precast concrete products / 177; 229
B33 Building design 205 315; 325; 388
B34 Building and construction – Environmental aspect 350; 351
B99 Undetermined / /
Sector C: Chemicals, chemical engineering and food products
Subsector Title ISO/TC CEN/TC
reference reference
C01 Food products 34 174; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054
C02 Paints and related products 35 139; 298; 173
C03 Chemistry 47 317; 363
C04 Laboratory glassware 48 332
C05 Lac / /
C06 Essential oils 54 /
C08 Pesticides 81 /
C09 Surfactants 91 276
C10 Starch 93 /
C11 Tobacco 126 401
C12 Glass plant / /
C13 Fertilizers 134 223; 260
C16 Wood preservatives / /
C17 Trees and plants / /
C18 Adhesives / 193
C19 Chemical analysis 201; 202 382; 347
C20 Explosives and firework / 212; 321
C21 Cosmetics 217 392
C22 Bio-Based products / 411
C99 Undetermined / 386
Sector F: Fundamental standards
Subsector Title ISO/TC CEN/TC
reference reference
F01 Technical drawings 10 /
F02 Units & symbols 12 /
F03 Preferred numbers 19 /
F04 Sieves 24 /
F05 Measuring instruments 30; 113 92; 171; 176; 237;
294; 318; 244; 367; 141; CEN/WS 011
F06 Terminology principles 37 /
F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368
F08 Surfaces / 290
F09 Banking 68 /
F10 Statistics 69 /
F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365
F13 Environmental tests / /
F14 Graphical technology, 130 / sign-boards and nameplates
F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033
F16 Graphical symbols 145 /
F17 Administrative documents 154 CEN/WS MMU
F18 Micrographics 171 /
F19 Optics 172; 187 123; 170
F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362
F21 Value analysis and project / 279 network
F22 Logistics / 379; 273
F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;
CEN/CLC/JWG 3; CEN/CLC/JWG 4; CEN/WS 027
F99 Undetermined / 389; CEN/WS 057; CEN/WS 058; CEN/WS 060
Sector H: Products for household and leisure use
Subsector Title ISO/TC CEN/TC
reference reference
H01 Cinematography 36 372
H02 Photography 42 /
H03 Consumer questions / 291
H04 Sports equipment 83 136
H05 Oil and gas burners / 47; 131
H06 Horology 114 /
H07 Space heating 116 62; 110; 130; 179; 180
H08 Sizing systems 133; 137 /
H09 Furniture 136 207
H10 Sewing machines 148 /
H11 Heater controls 161 58
H12 Ceramic and glass-ware for food 166 /
H13 Jewellery 174 CEN/WS 047
H14 Caravans 177 245
H15 Toys 181 52
H17 Oil stoves / 46
H18 Central heating boilers / 48; 57; 109; 269
H19 Non-electric cookers and barbecues / 49; 281; 295
H22 Smokers’ lighters and matches / 355; 87
H23 Ladders / 93
H24 Tactile danger warnings / /
H25 Large gas appliances / 106; CEN/CLC/JWG FCGA
H26 Sealing materials / 108; 208
H27 Educational equipment / /
H28 Hunting 191 /
H29 Heat pumps / 113
H30 Equipment for children / 252
H31 Dedicated LPG appliances / 181
H32 Culinary utensils 186 194
H33 Footwear (excluding protective / 309 footwear)
H34 Child safety / CEN/BT/WG 117 398
H99 Undetermined / 299; 364; 369; 402
Sector I: Mechanical engineering
Subsector Title ISO/TC CEN/TC
reference reference
I01 Screw threads 1 /
I02 Fasteners 2 185
I03 Limits & fits / /
I04 Rolling bearings 4 /
I05 Iron pipes 5 203
I06 Pressure vessels 11 54
I07 Shafts 14 /
I08 Agricultural machines 23 144, 334
I09 Small tools 29 213
I10 Splines / /
I11 Machine tools 39 142; 143; 145; 255
I12 Pulleys & belts 41 188
I13 Gas containers 58 23; 286
I14 Gears 60 /
I15 Equipment for petroleum industry 67 12
I16 Internal combustion engines 70; 192 270
I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025
I18 Mining 82 196
I19 Nuclear energy 85 /
I20 Refrigeration 86 44; 182
I21 Chains and chain wheels 100 /
I22 Vacuum technology 112 /
I23 Pumps 115 197
I24 Industrial fans 117 356
I25 Compressors 118 232
I26 Plain bearings 123 /
I27 Earth moving and construction 127; 195 151 equipment
I28 Fluid power 131 /
I29 Gas cleaning / 195
I30 Air distribution / 156
I31 Valves 153; 185 69; 236; 105
I32 Flanges / 74
I33 Information processing in 184 310 automation
I34 Non-ferrous metallic pipes / /
I35 Leisure and recreational machines / 152
I36 Thermoprocessing technology / 186
I37 Printing and paper machines / 198
I38 Leather production, tannery and / 200; 201 related machinery
I39 Machines for metal processing / 202; 322
I40 Industrial piping networks / 267
I41 Membrane filters / 272
I42 Potentially explosive atmospheres / 305
I43 Hydrogen energy 197 /
I44 Nanotechnologies 229 352
I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059
Sector M: Metallic materials
Subsector Title ISO/TC CEN/TC
reference reference
M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110
M02 Zinc / 209
M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron
M04 Copper 26 133
M05 Welding 44 121
M06 Dimensions of wrought products / /
M07 Manganese and chromium 65 /
M08 Light alloys 79 132
M09 Iron ores 102 /
M10 Metallic coatings 107 240
M11 Powder metallurgy 119 /
M12 Aluminium ores 129 /
M13 Ferroalloys 132 /
M14 Nickel 155 /
M15 Metallic corrosion 156 262; 219
M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101
M17 Heavy metal ores 183 /
M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407
M20 Tin and tin alloys / 220
M21 Precious metals / 283
M22 Lead and lead alloys / 306
M99 Undetermined / /
Sector N: Non-metallic materials
Subsector Title ISO/TC CEN/TC
reference reference
N01 Paper and board 6 172
N02 Solid fuels 27 335; 343;383; CEN/WS 019
N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061
N04 Refractories 33 187
N05 Textiles 38 189; 248
N06 Rubber 45 218; 366 CEN/WS 003
N07 Sawn timber 55 38; 175
N08 Mica / /
N09 Plastics 61 249
N10 Cork 87 /
N11 Wood-based panels 89 112
N12 Timber products 99 /
N13 Leather 120 289
N14 Plastics pipes 138 155
N17 Fluorspar 175 /
N18 Glass-fibre reinforced plastics / /
N19 Tapes / 253
N20 Ceramics 206 184
N21 Gaseous fuels and combustible gas 158; 193 238; 408
N22 Feather and related materials / 222
N23 Diamond / 410
N99 Undetermined / /
Sector S: Health, environment and medical equipment
Subsector Title ISO/TC CEN/TC
reference reference
S01 Acoustics and sound 43 126; 211 insulation
S02 Transfusion equipment 76 /
S03 Syringes 84 /
S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043
S05 Dentistry 106 55
S06 Vibration & shock 108 231
S07 Anaesthetic and respiratory 121 215 equipment
S08 Air quality 146 137; 243; 264; CEN/CLC/JWG CMI
S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034
S10 Surgical implants 150 285; CEN/CLC/JWG AIMD
S11 Contraceptives 157 /
S12 Gas analysis / /
S13 Ergonomics 159 122
S14 Prosthetics 168 /
S15 Surgical instruments 170 /
S16 Aids for the disabled 173 293
S17 Respiratory protective devices / 79
S18 Sterilization of equipment 198 102; 204
S19 First aid equipment and rescue systems / 239
S20 Waste collection, handling and / 183 transportation
S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055
S22 Energy saving / CEN/WS 005 CEN/WS 015
S23 Personal & property protection against aggression/Burglary protection / 263
S24 Soil quality 190 345; CEN/WS 032
S25 Chemical disinfectants and / 216 antiseptics
S26 Environmental management 207 CEN/TC 406; CEN/WS 040
S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120
S28 Demining / CEN/WS 029 CEN/WS 013
S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020
Sector T: Transport, mechanical handling and packaging
Subsector Title ISO/TC CEN/TC
reference reference
T01 Shipbuilding and maritime 8; 188 15; 300 structures
T02 Aerospace 20 274; AECMA; ECSS ;377
T03 Road vehicles 22 301; 326 CEN/WS IMA
T04 Tyres 31 /
T05 Pallets 51 /
T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393
T07 Glass containers 63 /
T08 Cranes 96 147
T09 Materials handling and 101 148; 149 storage equipment
T10 Freight containers 104 119; 280
T11 Steel wire ropes 105 /
T12 Industrial trucks 110 150; 324
T13 Lifting chains, hooks and ropes 111 168
T14 Packaging 122 261; 120
T15 Cycles 149 333
T16 Lifts & escalators 178 10; 242
T17 Builders hoists / /
T18 Elevating platforms / 98
T19 Road safety / 226; 339
T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR
T21 Packaging machines / 146
T22 Off-road vehicles / 354
T99 Undetermined / CEN/WS TAF
Sector Z: Information technology
Subsector Title ISO/TC CEN/TC
Z01 Radiocommunication for IT / /
Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI
Z03 Common O.S.I. activities / CEN/CLC - EWOS
Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;
CEN/WS XFS; CEN/WS XML; CEN/WS eGo; CEN/WS eIN; CEN/WS ePR