information procedure - hznscope : this austrian standard is an amendment to Önorm en 14351-2 for...

Information procedure Page 1

Monthly Notifications Register

Notifications registered at CCMC from 2016-08-01 to 2016-08-31

Register issued on : 2016-09-05

A list of subsectors can be found at the end of this document.




Sector A : SERVICES


Subsector A11: SAFETY AND SECURITY

Subsector : A11 Registration Date : 2016-08-10Organization : TSECountry : Turkey

Project ID : t1012426/0001 Project Established

ICS : 03.080.10, 11.040National Ref :Title : Competent services for Medical devices – RulesScope :

This standard includes rules for operating, physical characteristics, managership, technical equipment, personnel specifications and certification of Competent services for Medical devices - Rules

Relatedness :National : New :



ICS : 03.080.30, 11.040National Ref :Title : Private services – Rules for medical devicesScope : This standard includes rules for management, structural features, technical equipment,

personnel specifications and certification of private services for medical devices.




ICS : 03.080.30, 11.220National Ref :Title : Competent services - Diagnostic and treatment devices for health purposes used in

livestock and veterinary services - RulesScope : This standard includes rules for management, structural features, technical equipment,

personnel specifications and certification of competent services for diagnostic and treatment devices for health purposes used in livestock and veterinary services.


** End of Subsector **

Subsector A99: UNDETERMINED

Subsector : A99 Registration Date : 2016-08-30Organization : UNI

Country : Italy

Project ID : 01601966/0001 Project Established

ICS : 03.040National Ref : UNI1601966Title : Non-regulated professions - Educator of graphic gesture - Knowledge, skill and

competence requirementsScope : This standard specifies the requirements for the Educator of graphic gesture, in terms of

knowledge, skills and competence, in accordance with the European Qualifications Framework, EQF.


Subsector : A99 Registration Date : 2016-08-17Organization : DINCountry : Germany


ICS : 03.080.20National Ref : DIN 77210-1Title : Cash and value services - Part 1: Requirements


Subsector : A99 Registration Date : 2016-08-17Organization : DINCountry : Germany


ICS : 03.080.20National Ref : DIN 77210-2Title : Cash and value services - Part 2: Certification procedure for the conformity assessment

of cash and value services in accordance with DIN 77210-1



** End of Sector **




Sector B : BUILDING AND CONSTRUCTION


Subsector B01: FIRE PROTECTION

Subsector : B01 Registration Date : 2016-08-17Organization : DINCountry : Germany


ICS :National Ref : 03100973Title : Warnings - Audible warning and information signals for smoke detectors; Warning the

population in the event of a disaster or other significant hazards




ICS :National Ref : 03101096Title : Firefighting and fire protection - Portable generator - Part 3: Generating set

2 kVA



Subsector B02: STRUCTURES



ICS :National Ref : 00517848Title : Cladding for external walls - Principles of design and application - Part 1: Tiles fixed with

mortar


Subsector : B02 Registration Date : 2016-08-19Organization : UNMZ Draft Issue Date : 2016-08-17Country : Czech Republic Latest Date for Comments : 2016-09-10


ICS :National Ref :Title : Ground investigationScope : The aim of the new standard is unification of information for ground investigation

Relatedness :National : REV/AMD CSN 73 1005 (2016) :


Subsector B03: CONCRETE

Subsector : B03 Registration Date : 2016-08-30Organization : UNICountry : Italy


ICS : 91.100.10National Ref : UNI1601923Title : Non metallic expansive agents for cement mixings - Fitness and relevant checking

methodsScope : The standard specifies definition and requirements for non metallic expansive agents and

describes the procedures to check fitness to eavey out their specific action.

Relatedness :National : REV/AMD UNI 8146:2008 :



ICS : 91.100.10National Ref : UNI1601924Title : Not metallic expansive agents for cement mixings - Determination of restrained

expansion of mortarScope : The standard defines a method to measure the expansion induced in a mortar containing of

the expansive agent in a condition of restrained expansion.




ICS : 91.100.10National Ref : UNI1601925Title : Not metallic expansive agents for cement mixings - Determination of restrained

expansion of concreteScope : The standard defines a method to measure the expansion induced in a concrete containing

the expansive agent, in a condition of restrained expansion.


Subsector : B03 Registration Date : 2016-08-30

Organization : UNICountry : Italy


ICS : 91.100.30National Ref : UNI1602006Title : Concrete - Determination of the resistance to the degrade due to freeze-thaw cyclesScope : The standard defines test methods to determine the resistance to internal degrade due to

freeze-thaw cycles of concrete specimens prepared in laboratory, at workstation or taken in situ.




ICS : 91.100.30National Ref : UNI1602007Title : Testing fresh concrete - Determination of bleedingScope : This standard describes a method to determine the bleeding within a defined determine the

bleeding within a defined time. The method is not suitable for concrete made with aggregate > 40 mm.


Subsector : B03 Registration Date : 2016-08-25Organization : NBNCountry : Belgium

Project ID : BE664020/0001 Project Established

ICS : 91.100.30National Ref : prNBN B 15-007Title : Visible concrete – Classifications and specifications



Subsector B08: DOORS AND WINDOWS

Subsector : B08 Registration Date : 2016-08-22Organization : ASICountry : Austria


ICS : 91.060.50National Ref : ÖNORM B 5337Title : Internal doors - General requirementsScope : This Austrian Standard is an amendment to ÖNORM EN 14351-2 for single and double leaf

internal doors, intended for interior work; it also includes entry doors, doors for closed arcades and other doors inside a building. This ÖNORM specifies the generall requirements for internal door leaves and door frames at the moment of delivery. Installed internal doors are refered in ÖNORM B 5335. The requirements for external doors are described in ÖNORM B 5339. This standard does not reply to special doors like e.g. lift doors, sliding doors.



Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT



ICS : 91.140.40National Ref : UNI1601987Title : Gas measurement systems - Hourly based gas metering systems - Part 11-6:

Interchangeability point multipoint devices - Test specifications for the evaluation of conformity

Scope : This document completes the requirements, already specified in the other parts of UNI/TS 11291 series, in order to allow interchangeability of gas meters designed for mass-market (

Country : Hungary Latest Date for Comments : 2016-11-01

Project ID : 00013202/0001 Draft for public enquiry

ICS : 93.080.20, 93.080.20National Ref : MSZ 932:2017Title : Asphalt Concrete produced with the use of Rubber Modified Bitumen 45/80-55 (RmB

45/80-55)Scope : This standard gives requirements to Asphalt Concrete produced with the use of Rubber

Modified Bitumen 45/80-55 (RmB 45/80-55).


Subsector : B26 (Secondary Subsector)

Registration Date : 2016-08-02

Organization : MSZT Draft Issue Date : 2016-08-01Country : Hungary Latest Date for Comments : 2016-11-01

Project ID : 00013202/0001 Draft for public enquiry

ICS : 93.080.20, 93.080.20National Ref : MSZ 932:2017Title : Asphalt Concrete produced with the use of Rubber Modified Bitumen 45/80-55 (RmB

45/80-55)Scope : This standard gives requirements to Asphalt Concrete produced with the use of Rubber

Modified Bitumen 45/80-55 (RmB 45/80-55).


Subsector : B26 Registration Date : 2016-08-30Organization : SNV Draft Issue Date : 2016-08-29Country : Switzerland Latest Date for Comments : 2016-10-07

Project ID : CH160016/0001 Draft for public enquiry

ICS : 93.080.20National Ref : prSN 640440Title : Mastic asphalt; Conception, execution and requirements to the built-in layers

Relatedness :National : REV/AMD SN 640440c:2008 :


Subsector B29: AGGREGATES



ICS : 91.100.15National Ref : DIN 4226-101Title : Recycled aggregates for concrete - Part 101: Environmental requirements and types of

aggregate supplied (in accordance with DIN EN 12620)




ICS : 91.100.15National Ref : DIN 4226-102Title : Recycled aggregates for concrete - Part 102: Quality assurance (type testing and factory

production control)



Subsector B99: UNDETERMINED

Subsector : B99 Registration Date : 2016-08-22Organization : ASICountry : Austria


ICS : 91.010.20National Ref : ÖNORM B 2215Title : Wood working - Contract to provide servicesScope : This Austrian Standard gives methods and contractual provisions for timber structure works.




ICS :National Ref : 00517843Title : Sports grounds - Part 1: Outdoor play and athletics areas - planning and dimensions



** End of Sector **




Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS


Subsector C01: Food products

Subsector : C01 Registration Date : 2016-08-17Organization : DINCountry : Germany


ICS :National Ref : 05701899Title : Food hygiene - Retained samples in mass catering


Subsector : C01 Registration Date : 2016-08-04Organization : NENCountry : Netherlands


ICS : 67.230National Ref : NTA 8059:2016 Concept nlTitle : Prerequisite programs on food safety for storage and distribution Scope : This document specifies requirements for establishing, implementing and maintaining

prerequisite programs (PRPs) to assist in controlling food safety hazards. This document is applicable to all organizations, regardless of size or complexity, which are involved in the storage and distribution step of the food chain, that wish to implement PRPs in such a way as to address the requirements specified in Clause 7 of ISO 22000:2005. The document is neither designed nor intended for use in other parts of the food supply chain or in isolation. However, this document may be applied by other organizations willing to develop codes of practice and other types of supplier-buyer relationships based on ISO 22000:2005. Food storage and distribution operations are diverse in nature and not all of the requirements specified in this NTA apply to an individual establishment or process. Where exclusions are made or alternative measures implemented, these need to be justified by a risk assessment. Any exclusions or alternative measures adopted should not affect the ability of the organization to comply with these requirements.


Subsector : C01 Registration Date : 2016-08-01Organization : MSZTCountry : Hungary


ICS : 67.220.10, 67.220.10National Ref : MSZ 11007Title : Food grade salt (Sodium chloride)

Relatedness :National : REV/AMD MSZ 11007:2013 :

Subsector : C01 (Secondary Subsector)

Registration Date : 2016-08-01

Organization : MSZTCountry : Hungary


ICS : 67.220.10, 67.220.10National Ref : MSZ 11007Title : Food grade salt (Sodium chloride)

Relatedness :National : REV/AMD MSZ 11007:2013 :


Subsector C13: FERTILIZERS

Subsector : C13 Registration Date : 2016-08-22Organization : ASICountry : Austria


ICS : 65.080National Ref : ÖNORM S 2021Title : Growing media - Quality requirements and test methodsScope : This ÖNORM regulates quality requirements and test methods for growing media that are

placed on the market according to the Fertilizer Ordinance of 2004. It specifies the requirements to be met by growing media. The aim is to achieve an optimal plant growth when used as recommended these products.



Subsector C17: TREES AND PLANTS

Subsector : C17 Registration Date : 2016-08-22Organization : ASRO Draft Issue Date : 2017-01-10Country : Romania Latest Date for Comments : 2017-05-31


ICS : 65.020.99National Ref : SR 13574:2017Title : Sugar beet for industrializationScope : General information, technical requirements, rules for quality checking, testing and analyzing

methods for sugar beet for industrialization in order to extract the sugar or for the production of bioethanol and biogas

Relatedness :National : REV/AMD STAS 10603-75 (withdrawn) :


** End of Sector **




Sector F : FUNDAMENTAL STANDARDS


Subsector F12: INFORMATION PROCESSING SYSTEMS

Subsector : F12 Registration Date : 2016-08-19Organization : TSECountry : Turkey

Project ID : tst13582/0001 Project Established

ICS : 35.240.15National Ref :Title : Secure Card Access Devices for Electronic Identity Cards - Part 1: OverviewScope : This Standard specifices general features and characteristics of identification card access

devices used for national identification card systems.




ICS : 35.240.15National Ref :Title : Secure Card Access Devices for Electronic Identity Cards - Part 2: Interfaces and their

characteristicsScope : This Standard includes interfaces and their characteristics of card access devices used for

national identification card systems.




ICS : 35.240.15National Ref :Title : Secure Card Access Devices for Electronic Identity Cards - Part 3: Security

SpecificationsScope : This standard includes issues related to security for card access devices of national identity

cards.




ICS : 35.240.15National Ref :

Title : Secure Card Access Devices for Electronic Identity Cards - Part 4: KEC Application Software Specifications

Scope : This standard includes KEC Application software characteristics for card access devices of national identity cards.



Subsector F20: QUALITY ASSURANCE

Subsector : F20 Registration Date : 2016-08-22Organization : ASICountry : Austria


ICS : 03.120.10National Ref : ÖNORM ISO 10007Title : Quality management systems - Guidelines for configuration managementScope : This International Standard gives guidance on the use of configuration management within

an organization. It is applicable to the support of products and services from concept to disposal.



Subsector F99: UNDETERMINED

Subsector : F99 Registration Date : 2016-08-17Organization : DINCountry : Germany


ICS :National Ref : 04300759Title : Measures against counterfeiting - Guidelines for the preparation of protection concepts

against counterfeiting, illegal reproduction and trade of illegal goods



** End of Sector **




Sector I : MECHANICAL ENGINEERING


Subsector I02: FASTENERS

Subsector : I02 Registration Date : 2016-08-17Organization : DINCountry : Germany


ICS :National Ref : 06702240Title : Lifting eye bolts




ICS :National Ref : 06702241Title : Lifting eye nuts




ICS :National Ref : 06702266Title : Retaining rings for bores - Normal type and heavy type




ICS :National Ref : 06702267Title : Retaining washers for shafts



Subsector I06: PRESSURE VESSELS



ICS :National Ref : 01200613Title : Tolerances for agitator vessels - Part 1: Agitator vessels of metallic materials



Subsector I09: SMALL TOOLS



ICS :National Ref : 12102717Title : Tabular layouts of properties - Part 102: Data exchange for tabular layouts of properties

with XML schema



Subsector I11: MACHINE TOOLS

Subsector : I11 Registration Date : 2016-08-23Organization : TSECountry : Turkey


ICS : 21.160National Ref :Title : Springs - Quality requirements - Cylindrical helical compression springs - Part 1: Made

from round wire and rods, hot formedScope : This standard covers hot formed compression springs made of round steel as shown in the

standard. The permissible deviations specified in this standard apply to helical compression springs which satisfy the following

Relatedness :National : NewEuropean : Modified DIN 2096-1:1981


Subsector I19: NUCLEAR ENERGY

Subsector : I19 Registration Date : 2016-08-22Organization : ASICountry : Austria


ICS : 13.100, 13.280National Ref : ÖNORM S 5223-2Title : Estimation of effective dose at planned exposition situations with natural radioactive

material - Part 2: Dose evaluationScope : This ÖNORM deals with the estimation of effective dose at planned exposition situations

with natural radioactive material, especially in case of increased expositions through Rn-222, uranium or thorium and their secundary products (without radon). The calculation of the effective dose from measurment data ist examined. This ÖNORM is for determining the dose at at planned exposition situations with natural radioactive material and shall be applied in operations from staff dealing self-dependently in fields with expected increased exposition through natural radioactive material.


Subsector : I19 Registration Date : 2016-08-22Organization : ASICountry : Austria


ICS : 13.280, 73.020, 91.040.01National Ref : ÖNORM S 5280-1Title : Radon - Part 1: Metrological tasks and evaluationScope : Radon and its secundary products exposes the general public to potential health risks.

Comprehensive studies in Austria indicate an indoor average value of radon of 100 Bq/m3. The inhalation of radon causes about 40 % of the entire effective dose of the exposition sum of natural and simulated radiation sources. In this connection the present ÖNORM describes different metrological tasks, appropriate measuring methods and the evaluation of the results in regard to the standard value.



Subsector I34: NON-FERROUS METALLIC PIPES



ICS :National Ref : 04111891Title : Warm water surface heating systems and radiator connecting systems - Plastics piping

systems and multilayer piping systems



** End of Sector **




Sector M : METALLIC MATERIALS


Subsector M16: MECHANICAL TESTS FOR METALS

Subsector : M16 Registration Date : 2016-08-17Organization : DINCountry : Germany


ICS :National Ref : 06234917Title : Testing of metallic materials - Metallographic Micrographs - Picture scales and formats



** End of Sector **




Sector N : NON-METALLIC MATERIALS


Subsector N03: PETROLEUM PRODUCTS

Subsector : N03 Registration Date : 2016-08-17Organization : DINCountry : Germany


ICS : 75.100National Ref : DIN 51485Title : Lubricants - Processing fluids for forming and machining of materials - Metalworking and

forming fluids: Requirements and test methods



Subsector N05: TEXTILES



ICS :National Ref : 10600625Title : Geosynthetics - Determination and testing of the interaction coefficient to the soil using

pullout test




ICS :National Ref : 10600626Title : Textile slings - Safety - Disposable flat woven slings, made of man-made fibres



** End of Sector **




Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT


Subsector S01: ACOUSTICS AND SOUND INSULATION

Subsector : S01 Registration Date : 2016-08-30Organization : UNICountry : Italy


ICS : 17.140.20National Ref : UNI1601918Title : Acoustics - Operational guidelines for editing information about noise emission of

machines Scope : The technical report provides a operational guidance for editinginformation about noise

emissions of machines and produces a format to facilitate the manufacturers to report in the user guide the information in accordance with current legislation. he technical report applies to machines subject to the Machinery Directive 2006/42 / EC and Directive 2000/14 / EC for outdoor equipment.



Subsector S08: AIR QUALITY

Subsector : S08 Registration Date : 2016-08-12Organization : PKNCountry : Poland


ICS : 13.040.30National Ref : prPN-Z-04490Title : Air purity protection -- Determination of toluene-2,4-diisocyanate and toluene-2,6-

diisocyanate in workplaces by high performance liquid chromatographyScope : This standard gives a method for the determination of the content of toluene 2,4-

diisocyanate (CAS: 584-84-9) and toluene-2,6-diisocyanate (CAS: 91-08-7) in workplace air by high performance liquid chromatography. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration of toluene-2,4-diisocyanate and toluene-2,6-diisocyanate which can be determined by the method in the sampling and determination conditions specified in the standard is 0,00014 mg/m3


Subsector : S08 Registration Date : 2016-08-12Organization : PKNCountry : Poland


ICS : 13.040.30National Ref : prPN-Z-04491Title : Air purity protection -- Determination of N,N-dimethylacetamide in workplaces by gas

chromatography with flame-ionization detectionScope : This standard gives a method for the determination of the content of N,N-

dimethylacetamide (CAS: 127-19-5) in workplace air by gas chromatography with flame-ionization detection. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration of N,N dimethylacetamide which can be determined

by the method in the sampling and determination conditions specified in the standard is 1 mg/m3



Subsector S09: WATER QUALITY AND WATER SUPPLY

Subsector : S09 Registration Date : 2016-08-22Organization : ASICountry : Austria


ICS : 13.060.10, 93.025National Ref : ÖNORM B 2572Title : On-Site Systems for the use of rainwater and greywater National supplements to

ÖNORMEN EN 16941-1 and -2Scope : This standard contains complementary provisions and requirements for design, sizing,

installation, identification, commissioning and maintenance of rainwater- and greywater systems for the use on-site and has to be applied together with ÖNORM EN 16941 Part 1 and 2.


Subsector : S09 Registration Date : 2016-08-17Organization : DINCountry : Germany


ICS : 13.060.10National Ref : DIN 38402-13Title : German standard methods for the examination of water, waste water and sludge -

General information (group A) - Part 13: Sampling from aquifers (A 13)



Subsector S27: WASTE - CHARACTERIZATION, TREATMENT AND STREAMS



ICS : 13.030.01National Ref : ÖNORM S 2100Title : List of wastesScope : This Austrian Standard has the purpose to consolidate the waste types and the names used

for this purpose, code numbers together with any specifications stating the GTIN for any waste according to AWG 2002.



Subsector S99: UNDETERMINED



ICS : 65.020.40National Ref : ÖNORM L 1135Title : Assessment of vegetation areas according to ecological criteriaScope : This ÖNORM specifies those parameters used in an ecological assessment (performance

evaluation) for example in the context of environmental issues. For this purpose, the relevant terms, a classification of performance, the general process of review and the minimum requirements of evaluation methods are determined.


Subsector : S99 Registration Date : 2016-08-30Organization : UNICountry : Italy


ICS : 13.100National Ref : UNI1601968Title : Adoption and effective implementation of the Organizational and Management Models

(MOG) of health and safety - Asseveration procedure by Italian Joint BodiesScope : Legislative Decree 81/2008 allows the asseveration of the adoption and effective

implementation of the organizational and management models of health and safety at work as declined in art. 30 of same legislative decree, with the aim to prevent the crimes referred to the art. 25 septies of Legislative Decree 231/01. This option is left to the Joint Bodies constituted of associations of employers and workers between the most representative at national level. However, the law does not give a resolution about the kind of requirement or procedures for the asseveration activity, except for the one, declined in paragraph 3b of art. 51 of the Decree 81, according to which "for the purposes referred to paragraph 3‐ bis, the joint bodies establish specific joint commissions, technically competent". It is therefore useful and necessary a technical report that provides methods and tools for carrying out the verification activity of MOG implemented by companies with the aim to attest the effective actuation of the organizational and management models by the Joint Bodies.




ICS : 13.340.01National Ref : DIN 19426-1Title : AutoID systems for the digital identification and classification - Part 1: Numbering

structure




ICS :National Ref : 08000288Title : Quality control of multi-modal imaging - Part 2: Routine test SPECT/CT




ICS :National Ref : 08000289Title : Processes in radiology - Part 1: Diagnosis of a imaging or image-based procedure




ICS :National Ref : 08000291Title : Image quality assurance in diagnostic X-ray departments - Part 100: Determination of

physical parameters for the evaluation of the image quality in digital mammography




ICS :National Ref : 08000292Title : Identification and characterization of radiological images in medical diagnosis - Part 2:

Passing on of radiographs and related records in digital radiography, digital fluoroscopy, cone-beam computed tomography and computed tomography




ICS :National Ref : 08000293Title : Nuclear medicine departments - Part 3: Radiation protection calculations



** End of Sector **




Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING


Subsector T02: AEROSPACE

Subsector : T02 Registration Date : 2016-08-17Organization : DINCountry : Germany


ICS :National Ref : 13115649Title : Aerospace - Determination of coefficient of friction of bolt/nut assemblies under specified

conditions; Text in German and English



Subsector T10: FREIGHT CONTAINERS

Subsector : T10 Registration Date : 2016-08-17Organization : DINCountry : Germany


ICS :National Ref : 05701934Title : Food hygiene - Mass Catering; Amendment 1



Subsector T12: INDUSTRIAL TRUCKS

Subsector : T12 Registration Date : 2016-08-03Organization : LVS Draft Issue Date : 2016-08-04Country : Latvia Latest Date for Comments : 2016-10-03


ICS : 43.020National Ref : LVS 449Title : Tractors, self propelled vehicles and their trailers types. DefinitionsScope : This standard defines tractors self-propelled and their trailers groups and definitions of their

vehicle groups. This standard set of tractors, self-propelled and their trailers groups and this group in definitions. Groups and definitions are established without changing the manufacturer's intended use.

Relatedness :National : REV/AMD LVS 449 :


Subsector T15: CYCLES

Subsector : T15 Registration Date : 2016-08-17Organization : DIN

Country : Germany


ICS :National Ref : 11201180Title : Cycles - Transportation bikes and cargo bikes - Requirements and test methods for

single- and multi-track cycles



Subsector T19: ROAD SAFETY

Subsector : T19 Registration Date : 2016-08-09Organization : SNV Draft Issue Date : 2016-08-08Country : Switzerland Latest Date for Comments : 2016-09-19

Project ID : CH160015/0001 Draft for public enquiry

ICS : 93.080.30National Ref : prSN 641722Title : Road Safety - Audit

Relatedness :National : REV/AMD SN 641722:2013 :


** End of Sector **




Sector Z : INFORMATION TECHNOLOGY


Subsector Z99: UNDETERMINED

Subsector : Z99 Registration Date : 2016-08-19Organization : TSECountry : Turkey


ICS : 35.240.15National Ref :Title : Electronic Identity Verification System for Turkish National Identity Cards - Part 1:

Overview and Turkish National Identity CardScope : This part of "Electronic Identity Verification System for Turkish National Identity Cards"

developed by TÜBİTAK BİLGEM defines the "Electronic Identity Verification System" in general. Also, Identity Card Data Structure and Identity Card Data Access Rules are defined in this section.




ICS : 35.240.15National Ref :Title : Electronic Identity Verification System for Turkish National Identity Cards - Part 2: Identity

Verification ServerScope : This part of "Electronic Identity Verification System for Turkish National Identity Cards"

developed by TÜBİTAK BİLGEM defines the properties of server which validates the identity authentication asertions on behalf of the company where service is taken.




ICS : 35.240.15National Ref :Title : Electronic Identity Verification System for Turkish National Identity Cards - Part 3: Identity

Verification Policy ServerScope : This part of "Electronic Identity Verification System for Turkish National Identity Cards"

developed by TÜBİTAK BİLGEM defines the properties of server which is used to define the authentication policies that will be used in the identity authentication operations of the company where service is taken.


Subsector : Z99 Registration Date : 2016-08-19Organization : TSE

Country : Turkey


ICS : 35.240.15National Ref :Title : Electronic Identity Verification System for Turkish National Identity Cards - Part 4: Role

ServerScope : This part of "Electronic Identity Verification System for Turkish National Identity Cards"

developed by TÜBİTAK BİLGEM defines the properties of the Role Server.



** End of Sector **

2011-06

List of non-electrotechnical subsectors

Sector A: Services

Subsector Title ISO/TC CEN/TC

reference reference

A01 Tourist services / 329; CEN/WS ETO

A02 Cleaning services / 328

A03 Postal services / 331

A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM

A05 Maintenance services / 319

A06 Building and construction services / 330

A07 Translation services /

A08 Funeral services / CEN/BT/TF 139

A09 Facility management / 348

A10 Services of Real Estate Agents / CEN/BT/TF 180; 373

A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4

A12 Consultancy Services / 395; 381

A13 Expertise Services / 405

A14 Aesthetic Services / 403;409

A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404

Sector B: Building and construction


reference reference

B01 Fire protection 21 70; 72; 191; 192

B02 Structures 59; 98 166; 167; 250; 277; 346; 349; 284; 288; 297; 340

B03 Concrete 71 104; CEN/WS 009

B04 Cement 74; 77 51

B05 Fire tests 92 127

B06 Gypsum / 241

B07 Glass 160 129

B08 Doors and windows 162 33

B09 Thermal matters 163 88; 89; 371; CEN/BT WG 173; CEN/WS 036

B10 Timber structures 165 124

B11 Metal structures 167 135

B12 Masonry 179; 196 125; 246

B13 Solar energy 180 312

B14 Geotechnics 182 341; 396

B15 Sanitary appliances / 163; 7

B16 Taps / /

B17 Lighting equipment and lighting / 50; 169 application technology

B18 Scaffolding / 53

B19 Ceramic tiles 189 67

B20 Drainage equipment / 165

B21 Baths / /

B22 Wallcoverings / 99

B23 District heating / 107

B24 Auxiliary and handicraft work / /

B25 Gas distribution installation and / 234; 235; 282 related equipment

B26 Road building and maintenance / 178; 227

B27 Waterproofing materials / 128; 254; 361; 314

B28 Floor coverings 38/SC 12 134

B29 Aggregates / 154

B30 Floor and surfacing / 217; 303; 323; 390

B31 Heating systems in buildings / 228; 247

B32 Precast concrete products / 177; 229

B33 Building design 205 315; 325; 388

B34 Building and construction – Environmental aspect 350; 351

B99 Undetermined / /

Sector C: Chemicals, chemical engineering and food products


reference reference

C01 Food products 34 174; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054

C02 Paints and related products 35 139; 298; 173

C03 Chemistry 47 317; 363

C04 Laboratory glassware 48 332

C05 Lac / /

C06 Essential oils 54 /

C08 Pesticides 81 /

C09 Surfactants 91 276

C10 Starch 93 /

C11 Tobacco 126 401

C12 Glass plant / /

C13 Fertilizers 134 223; 260

C16 Wood preservatives / /

C17 Trees and plants / /

C18 Adhesives / 193

C19 Chemical analysis 201; 202 382; 347

C20 Explosives and firework / 212; 321

C21 Cosmetics 217 392

C22 Bio-Based products / 411

C99 Undetermined / 386

Sector F: Fundamental standards


reference reference

F01 Technical drawings 10 /

F02 Units & symbols 12 /

F03 Preferred numbers 19 /

F04 Sieves 24 /

F05 Measuring instruments 30; 113 92; 171; 176; 237;

294; 318; 244; 367; 141; CEN/WS 011

F06 Terminology principles 37 /

F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368

F08 Surfaces / 290

F09 Banking 68 /

F10 Statistics 69 /

F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365

F13 Environmental tests / /

F14 Graphical technology, 130 / sign-boards and nameplates

F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033

F16 Graphical symbols 145 /

F17 Administrative documents 154 CEN/WS MMU

F18 Micrographics 171 /

F19 Optics 172; 187 123; 170

F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362

F21 Value analysis and project / 279 network

F22 Logistics / 379; 273

F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;

CEN/CLC/JWG 3; CEN/CLC/JWG 4; CEN/WS 027

F99 Undetermined / 389; CEN/WS 057; CEN/WS 058; CEN/WS 060

Sector H: Products for household and leisure use


reference reference

H01 Cinematography 36 372

H02 Photography 42 /

H03 Consumer questions / 291

H04 Sports equipment 83 136

H05 Oil and gas burners / 47; 131

H06 Horology 114 /

H07 Space heating 116 62; 110; 130; 179; 180

H08 Sizing systems 133; 137 /

H09 Furniture 136 207

H10 Sewing machines 148 /

H11 Heater controls 161 58

H12 Ceramic and glass-ware for food 166 /

H13 Jewellery 174 CEN/WS 047

H14 Caravans 177 245

H15 Toys 181 52

H17 Oil stoves / 46

H18 Central heating boilers / 48; 57; 109; 269

H19 Non-electric cookers and barbecues / 49; 281; 295

H22 Smokers’ lighters and matches / 355; 87

H23 Ladders / 93

H24 Tactile danger warnings / /

H25 Large gas appliances / 106; CEN/CLC/JWG FCGA

H26 Sealing materials / 108; 208

H27 Educational equipment / /

H28 Hunting 191 /

H29 Heat pumps / 113

H30 Equipment for children / 252

H31 Dedicated LPG appliances / 181

H32 Culinary utensils 186 194

H33 Footwear (excluding protective / 309 footwear)

H34 Child safety / CEN/BT/WG 117 398

H99 Undetermined / 299; 364; 369; 402

Sector I: Mechanical engineering


reference reference

I01 Screw threads 1 /

I02 Fasteners 2 185

I03 Limits & fits / /

I04 Rolling bearings 4 /

I05 Iron pipes 5 203

I06 Pressure vessels 11 54

I07 Shafts 14 /

I08 Agricultural machines 23 144, 334

I09 Small tools 29 213

I10 Splines / /

I11 Machine tools 39 142; 143; 145; 255

I12 Pulleys & belts 41 188

I13 Gas containers 58 23; 286

I14 Gears 60 /

I15 Equipment for petroleum industry 67 12

I16 Internal combustion engines 70; 192 270

I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025

I18 Mining 82 196

I19 Nuclear energy 85 /

I20 Refrigeration 86 44; 182

I21 Chains and chain wheels 100 /

I22 Vacuum technology 112 /

I23 Pumps 115 197

I24 Industrial fans 117 356

I25 Compressors 118 232

I26 Plain bearings 123 /

I27 Earth moving and construction 127; 195 151 equipment

I28 Fluid power 131 /

I29 Gas cleaning / 195

I30 Air distribution / 156

I31 Valves 153; 185 69; 236; 105

I32 Flanges / 74

I33 Information processing in 184 310 automation

I34 Non-ferrous metallic pipes / /

I35 Leisure and recreational machines / 152

I36 Thermoprocessing technology / 186

I37 Printing and paper machines / 198

I38 Leather production, tannery and / 200; 201 related machinery

I39 Machines for metal processing / 202; 322

I40 Industrial piping networks / 267

I41 Membrane filters / 272

I42 Potentially explosive atmospheres / 305

I43 Hydrogen energy 197 /

I44 Nanotechnologies 229 352

I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059

Sector M: Metallic materials


reference reference

M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110

M02 Zinc / 209

M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron

M04 Copper 26 133

M05 Welding 44 121

M06 Dimensions of wrought products / /

M07 Manganese and chromium 65 /

M08 Light alloys 79 132

M09 Iron ores 102 /

M10 Metallic coatings 107 240

M11 Powder metallurgy 119 /

M12 Aluminium ores 129 /

M13 Ferroalloys 132 /

M14 Nickel 155 /

M15 Metallic corrosion 156 262; 219

M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101

M17 Heavy metal ores 183 /

M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407

M20 Tin and tin alloys / 220

M21 Precious metals / 283

M22 Lead and lead alloys / 306

M99 Undetermined / /

Sector N: Non-metallic materials


reference reference

N01 Paper and board 6 172

N02 Solid fuels 27 335; 343;383; CEN/WS 019

N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061

N04 Refractories 33 187

N05 Textiles 38 189; 248

N06 Rubber 45 218; 366 CEN/WS 003

N07 Sawn timber 55 38; 175

N08 Mica / /

N09 Plastics 61 249

N10 Cork 87 /

N11 Wood-based panels 89 112

N12 Timber products 99 /

N13 Leather 120 289

N14 Plastics pipes 138 155

N17 Fluorspar 175 /

N18 Glass-fibre reinforced plastics / /

N19 Tapes / 253

N20 Ceramics 206 184

N21 Gaseous fuels and combustible gas 158; 193 238; 408

N22 Feather and related materials / 222

N23 Diamond / 410

N99 Undetermined / /

Sector S: Health, environment and medical equipment


reference reference

S01 Acoustics and sound 43 126; 211 insulation

S02 Transfusion equipment 76 /

S03 Syringes 84 /

S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043

S05 Dentistry 106 55

S06 Vibration & shock 108 231

S07 Anaesthetic and respiratory 121 215 equipment

S08 Air quality 146 137; 243; 264; CEN/CLC/JWG CMI

S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034

S10 Surgical implants 150 285; CEN/CLC/JWG AIMD

S11 Contraceptives 157 /

S12 Gas analysis / /

S13 Ergonomics 159 122

S14 Prosthetics 168 /

S15 Surgical instruments 170 /

S16 Aids for the disabled 173 293

S17 Respiratory protective devices / 79

S18 Sterilization of equipment 198 102; 204

S19 First aid equipment and rescue systems / 239

S20 Waste collection, handling and / 183 transportation

S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055

S22 Energy saving / CEN/WS 005 CEN/WS 015

S23 Personal & property protection against aggression/Burglary protection / 263

S24 Soil quality 190 345; CEN/WS 032

S25 Chemical disinfectants and / 216 antiseptics

S26 Environmental management 207 CEN/TC 406; CEN/WS 040

S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120

S28 Demining / CEN/WS 029 CEN/WS 013

S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020

Sector T: Transport, mechanical handling and packaging


reference reference

T01 Shipbuilding and maritime 8; 188 15; 300 structures

T02 Aerospace 20 274; AECMA; ECSS ;377

T03 Road vehicles 22 301; 326 CEN/WS IMA

T04 Tyres 31 /

T05 Pallets 51 /

T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393

T07 Glass containers 63 /

T08 Cranes 96 147

T09 Materials handling and 101 148; 149 storage equipment

T10 Freight containers 104 119; 280

T11 Steel wire ropes 105 /

T12 Industrial trucks 110 150; 324

T13 Lifting chains, hooks and ropes 111 168

T14 Packaging 122 261; 120

T15 Cycles 149 333

T16 Lifts & escalators 178 10; 242

T17 Builders hoists / /

T18 Elevating platforms / 98

T19 Road safety / 226; 339

T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR

T21 Packaging machines / 146

T22 Off-road vehicles / 354

T99 Undetermined / CEN/WS TAF

Sector Z: Information technology


Z01 Radiocommunication for IT / /

Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI

Z03 Common O.S.I. activities / CEN/CLC - EWOS

Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;

CEN/WS XFS; CEN/WS XML; CEN/WS eGo; CEN/WS eIN; CEN/WS ePR

information procedure - hznscope : this austrian standard is an amendment to Önorm en 14351-2 for...

Documents