initial load line survey - fujairahfujairahport.ae/tugsale/tug evaluation/wadi saham/10 load...
TRANSCRIPT
DET NORSKE VERITAS
INITIAL LOAD LINE SURVEY
INTERNATIONAL CONVENTION ON LOAD LINES, 1966RECORD OF CONDITIONS OF ASSIGNMENT
DNV Id. No.: 28725
Name of ship: WADISAHAM
Port of registry: Fujairah
Nationality: United Arab Emirates
Distinctive number or letters: F4144
Gross tonnage: 212
Freeboard assigned as a ship of Type: B
Classification: 4< 1A1 Tug
Shipbuilders: Damen Shipyards B.V.
Yard Number: 3190
Date of Build/Conversion: 1997
Date of initial survey: 5 December 1996 (LR)
Sister ship:
List of plans attached to this report:
Only page 1 of 17 of Form No. 44.401a + LR Record of Conditions of Assignment
THIS COPY IS TO BEKEPT ON BOARD TOGETHER
WITH THE LOAD LINECERTIFICATE
For report onmeasurements for Load Lines,See Form No. 44.402a
If any person suffers loss or damage which is proved to have been caused by any negligent act or omission of De! Norske veraas. then De! Norske veritas shall pay compensation to such person for his proved direct loss ordamage. However, the compensation shall nor exceed any amount equal to ten times the fee charged for the service in question, provided that the maximum compensation shall never exceed USD 2 million. In this provision "DetNorske veritas" shall mean the Foundation Oet Norske Veritas as well as all its subsidiaries, directors, officers, employees, agents and any other on behalf of De! Norske veritas.
DETNORSKE VERITAS, VERITASVEIEN 1, N-1322 H0VIK, NORWAY, TEL INT: +47 67 57 99 00, TELEFAX: +4767 57 9911Form No.: 44.401 a Issue: August 2001 Page 1 of 17
REPORT No,
h'2~r2.S~~~~,INTERNATIONAL CONVENTION ON LOAD LINES, 1966RECORD OF CONDITIONS OF ASSIGNMENT
LR Number 9150391
Ship's Name "WADI SAHAMtt
flag United Arab Emirates
Shipbuilder D8JIlen Shipyards Gorinchem
(Yard Number 3190
Date of Build/~ 1997
Freeboards Assigned as a Ship of Type B
Class Notation + 100 Al Tug
Service Restriction Arabian Gulf and Gulf of OmanService
Survey Port Rotrt e rdam
The conditions of assignment shown on this form are a record of the arrangements and fittings pr lded nthe ship and are in accordance with the requirements of the relevant regulations of the Int matioConvention on Load Lines, 1966,
Surveyor to L](lowy:Qj~~t'et-1I3i-SIhir;ID
Date 05 .12 .1996
For Head Office UseOwner's copy Form 2026 issued
At Periodical Surveys and Inspections it is to be verified that approved stability injormation is on board
FORM 2026 (04/91) C11 OMOl
LR Number 9150391
,('5:=
A pia •• of suitable siu may be attached to this Report in prefertllCJ! 10 sketches on this page.
Disposition and dimensions of superstructures, trunks.deckhouses, machinery casings;extentofbulwarks, guard rails and wood sheathing on exposed deck, to be insertedin the diagrams and tables following; together with positions of hatchways, gangways, and other means for the protection of the crew; cargo ports, bow and stem doors,si~e scuttles, scuppers, ventilators, air pipes, companionways, and other items that would affect the seaworthiness of the ship.
Superstructure deck--------------------------------------------/>~<----------------------LL~C;
I JZ::Sj--+-1 -.
----&etv;J 6)~~ _"" I - ~ <::} I ~"
roRM 2026-1(1)4.191) ell (tMO) PaS" 2
LR Number 9150391
DOORWAYS TN SUPERSfRUClURFS, EXPOSED MACHINERY CASINGS AND DECKHOUSES PROfE<;I'ING OPENINGS TN FREEBOARD AND SUPERSTRUCTURE DECKS (Regs. 12. 17 &: 18)
Closing AppliancesRef. No. on Number and Size of Openings Height of Sills NumberLocation Sketch or Plan Type and Material ofCl:ips
In forecastle bulkhead
In poop bulkhead
In deckhouses and 1 & 2 2 X 1400 x 700 600 [Hinged Watertight 6companionways in
Position 1 enclosing 3 1 x 1400 X 600 600 Steel Doo~[Hinged 6openings leading belowW.T. Steel Door]
In exposed machinery casings onfreeboard or raised quarter decks
Inner doors in machinery casingson Type 'A' and 'Bsreduced' ships
In deckhouses in Position 2enclosing openings leading 5 2 x 1800 X 700 350 Hinged W.T. 6within enclosed superstructures 4 Steel Dooror below freeboard deck
fORM Z026-2 (04/91) ell (IMQ) Page 3
p!r r»
If~···z.:
LRNumber 9150391
DOORWAYS IN SUPERSTRUcruRE5, EXPOSED MACHINERY CASINGS AND DECKHOU5ES PROTECTING OPENINGS IN FREEBOARD AND SUPERSTRUCTURE DECKS (continued)
Ref. No. on Closing AppliancesLocation Sketch or Plan Number and Size of Openings Height of Sills
Type and Material Numberof Clips
In exposed pump room casings
In bridge bulkheads
In machinery casingswithin superstructures or
deckhouses on freeboard deck
In exposed machinery casingson superstructure decks
fORM 202rN (04/91) CJ 1 (!MO) Pose 4 e e
.---.
LR Number 9150391
CARGO HATCHWAYS AT POSITIONS 1 AND 2 CLOSED BY PORT ABLE COVERS AND SECURED WEATHERTIGHT BY TARPAULINS AND BAITENING DEVICES (Reg. 15)
Position and Reference No.on sketch or plan
Dimensions of clear openingat top of coarning
Height of coaming above deck
PORTABLE BEAMSNumber
Spacing1,1 I-b;l~I b, x t,
Dxt w1f1~ b,x t(
Bearing surface
Means of securing each beam
PORT ABLE COVERSMaterial
Thickness
Direction fitted
Bearing surface
Are wood covers fitted withgalvanised end bands?
Spacing of cleats
TARPAULINSNumber of layers
Material
Means of securingeach section of cover:
roRM2026-4(D4/91) ell (lMO)P.geS
LRNumber 9150391
CARGO HA TCHWA YS AT POSmONS 1 AND 2 CLOSED BY WEA lHERTIGHT COVERS OF STEEL (OR OTHER EQUIV ALENT MATERIAl) FITTED wrrn GASKETS AND CLAMPING DEVICES (Reg. 1/,)
Position and Reference No.on sketch or plan
Dimensions of clear openingat top of roaming
Height of coaming above deck
Type of cover or Patent Name
Material
Position and Reference No.on sketch or plan
Dimensions of clear openingat top of coarning
Height of coarning above deck
.-Type of cover or Patent Name
Material
FORM 2026-5 (04/91) ell (lMO) Page 6 e e
---.LRNumber 9150391SMALL HATCHES (MACHINERY SPACE OPENINGS AND MISCELLANEOUS OPENINGS IN FREEBOARD AND SUPERSTRUCTURE DECKS (Regs. 17 &. 18»
A B C D E F
Position and Reference No. Forepeak Escape Accomm. Repa.irHatch ER Repair Hatch ER Rope Store Escape Ropestoreon sketch or plan
Dimensions ¥' 560 800 X 600 3950 X 1900 3950 X 1900 2000 X 2000 'TOO X 500
,Height of coaming Flush * 660 Flush • Flush * 600 60 at top coaming
of E. { Material Steel Steel Steel Steel Aluminium Aluminium
C~VER
: How attached Bolts Hinged O.B.S. Bolts Bolts Toggles Ringed O.B.S.•
Num~ and spacing of toggle! 12 a 140 4 a 540 110 a 100 110 a. 100 14 a 550 4 8. 450,
G
IPosition and Reference No.Entrance wheelhm se. on sketch or plan
Dimensions 1400 X 600 mm
Height of coarning 300
{ Material steelCOVER
How attached Hinged O.B.S. • provided wit note: to be kept closed at sea
Number and spacing of toggles. 4 a. 650
FORM 2II2Mi (04/911 Ct I (lMOI Page7
LR Number 9150391
A""lVY ')fl? •••...7 fl'W /Q1\ n1 I'TMOl P.-_ A e e
VENTILATORS ON FREEBOARD AND SUPERSTRUCTIJRE DECKS (POSmONS 1 AND 2) (Reg. 19)
Deck on Which Fitted Number Coaming TypeClosing AppliancesFitted Dimensions Height (Slate Patent Name if any)
2. ¢ 90 760* Wiko Cap with PVC float ball with closing deviceFreeboard deck 2 600 x 770 2200 Jalousie Steel Hinged Fire Flap Toggled W.T.2 1220 x 320 4500 Jalousie Steel Hinged Fire Flap Toggled W.T.I 2100 x 550 900 Jalousie Steel Hinged Fire Flap Toggled W.T.1 1500 :x: 800 2150 Jalousie Steel Hinged Fire Flap Toggled W.T.2· ¢ 90 900 Wiko Cap with P.V.C. Float Ball with Closing Device
Bridge Deck 2 6" 900 Gooseneck Steel Hinged Flap Toggled Watertight1 5" 900 Gooseneck Steel Hinged Flap Toggled Watertight1 4" 900 Gooseneck Steel Hinged Flap Toggled Watertight
* Hei ght limited by t~wline/bulwe Irk but located in well JIrotected area.
Are ventilators exceeding 900mm in height adequately supported? YES/~
LR Number 9150391
AIR PIPES ON FREEBOARD AND SUPERSTRUCTURE DECKS (Reg. 20)
Deck on Which Fitted Number Coaming TypeClosing AppliancesFitted Diameter Height (State Patent Name if any)
Freeboard Deck 7 ~ 76 760 Wiko Cap with P.V.C. Ball2 r/J 90 760 Wiko Cap with P.V.C. Ball
Are air pipes from oil fuel tanks provided with wire gauze screens? YES / ~R.bdSCAJtWX
Are air pipes exceeding 900mm in height adequately supported? ~ / NOT APPllCABLE
FORM 2IJ26.8 (04/91) 01 (!MO) rage 9
LR Number 915039l
CARGO PORT AND OTHER SIMILAR OPENINGS (Reg. 21) INCLUDlNG VISORS AND RAMPS
Position of Port Dimensions of Opening Distance of Lower Edge Securing Devices Remarksfrom Freeboard Deck
.
Are cargo ports, visors and ramps in accordance with approved plans? YES / NOT APPLICABLE
Will the hydraulic securing arrangements if fitted remain locked In the event of hydraulic failure? YES / NOT APPLICABLE
FORM 2026-9 (04/91) en (!MOl Page 10 e e
LR ~umber 9150391SCUPPERS. lNLElS AND DISCHARGES (Reg. 22)
Pipe Vertical Distance Above Top of Keel•• Number. Type and Material
• State ifFrom Discharge Uppermost Position of ControlsScupper or Number
of Discharge ValvesDischarge Diameter Thickness t MaterialOutlet in Hull Inboard End Valve
-D 1 088.9 8 MS Sewage Tank 3550 3550 3550 SDANR CS Engine Room PSgalv.D 1 060.3 8 MS Galley and sanitary spaces 3400 3400 3400 SDANR CS Accommodation 81. galv.
Notes1. 8tbre, E gine oom aI1dcof ~erdam drained via Ship's bilgE system.2. Ch ~inloc er dr ined py scr wdown valve (operable from de k into fore peak) .3. Fo epeak drain d by ~lectr cally driven pump with outlet on forecast e deck via a SDANR val lire.
• S-ScupperD - Discharge
t MS - Mild steelCS - Cast steelGM-GunmetAlAny other approved material to be designated
SD - Screw downANR - Automatic non-returnSDANR - Screw down automatic non-return
/QRM 2021rl0 (04/91) ell (!MO) Page 11
LRNumber 9150391
SIDE SCUTTLES <Reg. 23)
Position Number Fitted Clear Glass SizeMaterial Thickness
Fixed or Opening of Standards UsedFrame Deadlight Toughened Glass
Deckhouse front 2 ~ 350 Fixed Steel Steel 12side 1 ~ 350 Opening Steel Steel 15 frosted ISO Standards are usedside 2 ~ 200 Fixed in Steel Steel 10
dooraft 1 ¢ 200 Fixed Steel Steel 10side 6 450x350 Opening Steel Steel 12
Wheelhouse front 1 1020xl060 Fixed Steel 152 1050x1060/ Opening Steel 15
9202 750x350 Fixed Steel 122 400x1020 Fixed Steel 12
side 2 1025x1210/ Fixed Steel 151000
~ 750x350 Fixed in Alum. bolted 10door
2- 1025x985/ Fixed Steel 15775
2 400x1200/ Fixed Steel 121055
2 400x700 Fixed Steel 122 400x725 Fixed Steel 12
a.ft 1 400x1020 Fixed Steel 122 375x10l0/ Fixed Steel 12
635. 1 1680x1020 Opening Steel 15
2 l660x1060/ Fixed (with Steel 15840 middle port).
The vertical distance below the freeboard deck to the bottom sill of the lowest side scuttle i~ 3500 mm
.roRM2026-11 (04/91) ell OMOH'al!" 12
e e
--LR Number 9150391
FREEING PORTS (Reg. 24)
Length of Height of Number and Size of Freeing Ports Each Side Total AreaBulwark Bulwark Each Side
Freeboard deck after well 19000 900/1000 nun 1 X 2000 x 220 +lXlOOO X 220 2.86 m2 •
.Freeboard deck forward well l3000 1000 mm 3 X 1500 X 220 0.99 m2
Superstructure deck
,. After well fr. 1 - 5fro 8 - 23
State fore and aft positionof each freeing port in relation •
to superstructure end bulkheads
L Forward well fr. 26 - 29fro 3 - 3fro 38 - 41
Particu1a.rs of shutters, bars or rails fitted to freeing ports; none
Height of lower edge of freeing port abovenilfreeboard and superstructure deck:
R)RM 2026-12 <O4/91l ell ((MOl Page 13
LR Number 9150391PROTECrION OF THE CREW (Regs. 25 & 26)
Particulars of bulwarks or guardrails on freeboard and superstructure decks:
Forecastle deck: Height 1000 mm: Plating 7 mm: Top rail ~ 102xlO (Supported at alternative frames)maindeck aft: Height 900/1000 mm: Plating 7 rom: Top rail 0 102xlO (Supported at alternative frames)Height aft is limited by towline/towing hook carried out for operational reasons between towing bit andbulwark a removable open railing is fitted (spaced 230 - 280 - 280 mm). Around deckhouse a handrail is fitted 0 40 mm aroundwheelhouse a open railing is fitted (230-380-380).. .Particulars of lifelines, walkways, gangways or underdeck passageways where required to be fitted:
Is a copy of the approved timber deck cargo loading and lashing plan on board? Xlr£)( NOT APPLICABLE
TIMBER DECK CARGO FITTINGS (Reg. 44)
Particulars of uprights, sockets, lashings, guardrails and lifelines:
OTHER SPECIAL FEATURES
PORM 202(,.13 (04 /91) C 11 liMO) Page 14
LR Number 9150391
UNITED KINGDOM REGISTERED SHIPS
INITIAL SURVEY
The conditions of assignment shown on this form are a record of the arrangements and fittings provided onthe ship and are in accordance with the requirements of the relevant regulations set out in Annex I to theConvention of 1%6 and of the United Kingdom Merchant Shipping (Load Line) (Amendment) Rules 1979(Statutory Instrument 1979 No. 1267)
(Surveyor to Lloyd's Register of Shipping
Date
SUBSEQUENT PERIODICAL SURVEYS
I have completed the periodical survey and am satisfied that the fittings and appliances are in accordancewith the particulars shown in this record and are in good condition and that approved stability informationand, where applicable, information relating to loading and ballasting of the ship is on board.
Signature Date of SurveyPort of Survey
(
FORM 2026 UK (()4/91) C11 (!MO) PAGE l'