inl b013 - inlucem.co.nz€¦ · project: quail ridge's showhouse ii 82 rainbow falls road,...
TRANSCRIPT
inl_B013
2015/06/21GRAPHIC INFORMATION. LIGHTING PLAN.
40 High street Island Bay. Wellington 6023 NZ0220 156 096 [email protected]
01/08
Stefano la Cava (Lighting Solutions)
PROJECT: Quail Ridge's Showhouse II82 Rainbow Falls Road, Kerikeri. Northland
CLIENT/CONTACT:
Mb: 021 773 221; PH: (09) 551 7418email: [email protected]
MOD.: 2015/06/21
NON DIMABLE LIGHTING CIRCUIT
DIMABLE LIGHTING CIRCUIT
POWER SUPPLY ON WALL
POWER SUPPLY ON CEILING
POWER SUPPLY FOR LED STRIP
F
POINT OF LIGHT CONTROL
POWER SUPPLY INGROUND
360deg MOTION SENSOR
180deg MOTION SENSOR
CONECTION BOX - IP RATEDSWITCHBOARD
POWER SUPPLY LED / DRIVER
OUTLET CONNECTED TO LIGHTING
DIMMER
GRAPHIC SCALE
02/08
2015/06/21LIGHTING CONCEPTS. EXTERIOR - ENTRANCE
E: 1/100
TO DETERMINE AN APPROPRIATE LIGHTING SYSTEM FOR THEEXTERIOR IT'S ESSENTIAL TO TAKE INTO CONSIDERATION HOWTHE HOUSE IS SEEN WHILE WE APPROACHING AND HOW THELANDSCAPE HAS BEEN DESIGNED.WHEN THE EYE IS NOT DISTURBED BY ANY DIRECT VISUALCONTACT BY A LIGHT SOURCE, IT IS ABLE TO PERCEIVE ALL THELIT SURFACES, TEXTURES AND ARCHITECTURAL ELEMENTS.AT NIGHT, WE MUST TAKE SPECIAL CARE OF HOW THE LIGHT ISPROVIDED TO ENHANCE THE FEATURES OF THE HOUSE AS THEBACKGROUND IS DARK SO THE EYE IS SO SENSITIVE.
TO DESIGNED A LANDSCAPE LIGHTINGWE MUST COUNT ON GENTLE LITSURFACES AND THEIR TEXTURES BUT ALSOTHE SHADOWS THAT A LIGHT FITTING WILLCREATE. SUGGESTIVE LIGHT SOLUTION TOLIGHT UP A PATH WHERE WE WALK BY.
THE CHARACTERISTICS OF THE USED PLANSARE ESSENTIAL TO COUNT ON THE DESIGNOF A TAILORED LIGHTING SOLUTION(DENSITY, HEIGHT, SHAPE,)SHADOWS CREATED IN WALLS PROVIDES ADRAMATIC LIGHTING EFFECT ENRICHINGHOUSE'S PERCEPTION.
A SUGGESTED LIGHTING SYSTEM IN THE GARAGE IS DIVIDEDIN 2 CIRCUITS, ONE OF THEM ACTIVATED BY A MOTIONSENSOR WHICH WILL ILLUMINATE THE PERIMETERWELCOMING YOU WITH A SOFT LIGHT (ALSO, THESUGGESTED FITTINGS WILL HAVE BLOCKED THE HORIZONTALCOMPONENT, PROVIDING AN EYE-GENTLE LIGHT.THE OTHER CIRCUIT IS FORMED BY LARGE SIZE LINEARFITTING AND IT PROVIDES TASK LIGHT AS NEEDED.THE NICELY DESIGNED UNIT WILL MAKE THE GARAGE LOOKGORGEOUS.
MOD.: 2015/06/21
03/08
2015/06/21LIGHTING CONCEPTS. DISTRIBUTOR/CORRIDOR
E: 1/100
LIGHTING SYSTEM IN THE CORRIDOR IS FORMED BY THREE CIRCUITS.
- GENERAL LIGHT IS PROVIDED BY DOWNLIGHTS WHICH WILL ENHANCE THE MAIN ENTRANCE, AND ALSOENRICH THE GENERAL PERCEPTION CREATING 2 FOCUS OF VISUAL ATTRACTION IN BOTH EXTREMES OF THECORRIDOR. PLACING INTENSE LIT AREAS IN THE EXTREME AND IN THE CENTRE WILL REDUCE VISUALLY THELARGE SPACE MAKING IT MORE PLEASANT WHILE CROSSING THROUGH IT.
- A COUPLE OF TILTABLE LIGHT FITTINGS WILL BE LOCATED INSIDE THE NOOK ALLOWING A DRAMATIC EFFECTTO THE SCENARIO. IT WILL BE COMPLETED WITH A RECESSED LIGHT FITTING LOCATED INSIDE OF EACHSKYLIGHT WASHING DOWN THE WALLS WITH DIFFUSED LIGHT. THIS SECONDARY LIGHTING SYSTEM IS ANEYE-GENTLE WAY TO LIT UP THE SPACE AS IT'S USING REFLECTED LIGHT.
- THE THIRD CIRCUIT DEFINE A NIGHT LIGHTING SYSTEM. IT WILL BE FORMED BY 2 ELEMENTS:.- LOW POWERED LED FITTINGS INSTALLED AT A LOW LEVEL OF WALL AIMING THE FLOOR.(THEY ARE ASYMMETRIC TO ENSURE A EYE-GENTLE LEADING LIGHT AVOIDING ANY GLARE DISTURBANCE.).- RECESSED LOW POWERED LED FITTING INSTALLED AT THE TOP OF THE SKYLIGHT, CREATING A"MOONLIGHT" EFFECT, COMPLETING NICELY THE LEADING LIGHT SYSTEM.
ACCENT LIGHT:
A COUPLE OF TILTABLE DOWNLIGHTSPLACED INSIDE THE NOOK WILLENRICH THE CORRIDOR "PLAYING"WITH WHAT YOU LOCATE IN IT.THAT HIDDEN LIGHT SOURCECREATES A SUGGESTIVE ANDDRAMATIC EFFECT.
IT WILL BE CONTROLLED SEPARATELYAS IT WILL GIVE A INSPIREDCHARACTER TO THE CORRIDOR.LIGHTING EFFECT COULD BECOMPLEMENTED WITH A GENTLEWASH OF REFLECTED LIGHT COMINGFROM THE SKYLIGHTS.
MOD.: 2015/06/21
04/08
2015/06/21LIGHTING CONCEPTS. LOUNGE/KITCHEN
E: 1/100
BEING ONE OF THE REPRESENTATIVES ELEMENTS OF A HOME, THE LIGHTING SYSTEM MUST BE DEVELOPEDTAKING INTO CONSIDERATION FLEXIBILITY, FUNCTIONALITY AND CHARACTER, AS THE LOUNGE IS WHERE THESOUL OF A HOUSE LIVES.THE 3 ESSENTIAL LAYERS OF THE LIGHTING SYSTEM ARE DETERMINED ADDING FLEXIBILITY WITH A VERSATILEELECTRICAL SYSTEM, EASY TO USE.
ACCENT LIGHT AS A GENERAL LIGHT.THE GENERAL SPACE IS NOT ASYMMETRIC, SO IT IS THE SUGGESTED ACCENT LIGHTING SYSTEM.ITS FORMED BY TILTABLE'/ASSYMETRIC DOWNLIGHTS LOCATED 450mm FAR FROM WALLS USING THEM ASREFLECTORS. THAT HELPS TO SPREAD THE LIGHT TO LIT UP THE ROOM.IT WILL BE CONTROLLED BY A DIMMER TO ADJUST THEIR INTENSITY AS DEMANDED, GOING WITH THE MOOD,MAKING THE SPACE COMPREHENSIVE AND THE PERCEPTION OF THE SPACE ENHANCED.ITS FUNCTIONALITY IS IMPORTANT THEREFORE IT WILL BE CONTROLLED IN DIFFERENT POINTS. IT'S NOTNECESSARY OVERLIGHT THE SPACE TO WALK THROUGH.
A COUPLE OF WALL LIGHTS, WITHTHE HORIZONTAL COMPONENT OFLIGHT BLOCKED, WILL BE PLACEDIN BOTH LATERALS, UPLIGHTING THECEILING. IT WILL BALANCE THE LIGHTSYSTEM BASED IN DOWNLIGHT,MAKING LESS HARSH FOR THE EYES.IT CAN BE USE BY ITSELF WASHINGTHE CEILING WITH DIFFUSED LIGHTPROVIDING A RELAXING LIGHT.
THE RESTING AREA WILL BE LIT BY THE LIGHT MAINLY FROMLIGHT COMING FOR ITS SURROUNDINGS.THE FIREPLACE WILL GIVE AN ATTRACTIVE CHARACTER TO THEAREA, BEING THAT WAY MORE PRESENCE, AS WELL AS THEEXTERIOR LANDSCAPE SEEING FROM THE LARGE SIZEWINDOW.
THERFORE, I SUGGESTED A NON-INTRUSIVE LIGHTING SYSTEMUSING A GROUP OF DOWNLIGHTS WHOSE CONCENTRATEBEAM ANGLE WILL PROVIDE DIRECTLIGHT TO THE CENTRE OF THE ROOM, AS REQUIRED.IT WILL BE CONTROLLED BY A DIMMER SO IT CAN BEADJUST AS REQUIRED TO A LOW LEVEL OF LIGHT.
A COUPLE OF OUTLETS WIL BE CONNECTED TO A SWITCH TOALLOW CONTROLLING A FLOOR LAMP FROM THEENTRANCE. IT WILL ALLOW PROVIDE DIFFERENT SCENARIOSAND ATMOSPHERES AS BE ABLE TO LIGHT UP JUST A NICELIGHT UNIT FROM THE ENTRANCE. IT WILL GET A POWERFULDRAMATIC RESULT.
TASK LIGHTING, KITCHEN
AMBIENCE LIGHTING, KITCHEN
LIGHTING UNITS ARE SKILLFULLY PLACED TO ENSURETHAT THE WORKING AREAS RECEIVE DEMANDED
LEVEL OF LIGHT.THE PANTRIES WILL RECOMMEND THE INSTALLATION
OF LED STRIP VERTICALLY PLACED TO ENSURE AFREE-SHADOW LIGHTING. THEY ARE AIMED AT THE
BACK OF THE PANTRY AVOIDING A DIRECT VISUALCONTACT OF THE LIGHT SOURCE, THEREFORE EASIER
TO SEE THE LIT ITEMS STORAGE IN THE PANTRY.THEY WILL BE CONTROLLED BY A SWITCH DOOR
MAKING THE SYSTEM SO EFFICIENT.
AFTER FINISH COOKING, A TASK LIGHT CAN BE SWITCH OFF ANDAMBIENCE LIGHT COULD BE USED. RECESSED LIGHT FITTINGS WILL NICELY
WASH THE CEILING OF THE KITCHEN PROVIDING AN INDIRECT LIGHTINGEFFECT. A DISPLAY OF RECESSED LED STRIPS WILL PROVIDE A EYE-GENTLY
LIGHT ON THE PENINSULA SURFACE.
THE FIREPLACE IS A FEATURE WITHIN THE LOUNGE.A DIRECT LIGHT THROUGH A COUPLE OF ASSYMETRICDOWNLIGHTS WILL ENRICH THE WAY ITS PERCEIVED AND ITWILL HELP TO ENHANCE WHATEVER PAINTING/PICTUREWOULD BE PLACED ON TOP OF IT.
MOD.: 2015/06/21
05/08
2015/06/21LIGHTING CONCEPTS. EXTERIOR AREAS.
E: 1/100
HAVING 3 SKYLIGHTS LOCATED ABOVE THE RESTING AREA HAS GIVEN ME THE PERFECT LOCATION FOR UNITSOF RECESSED LIGHTS FITTINGS.IT IS A SIMILAR LIGHTING SOLUTION THAT IN THE INTERIOR, THE VERTICAL SURFACES OF THE SKYLIGHT WILL BEUSED AS REFLECTOR OF THE LIGHT, THEREFORE THE SPACE WILL BE LIT BY A NON-INTRUSIVE SOFT LIGHT. THEFITTINGS WILL BE CONTROLLED BY A DIMMER SO THE INTENSITY WIL BE ADJUSTED AS DEMAND.
WHAT YOU LOOK FOR WHEN YOU ARE OUTSIDE IS BEING IN MORE DIRECTCONTACT WITH THE NATURE WHILE YOU ARE HAVING A GOOD TIME WITHFRIENDS AND FAMILY WITHIN A RELAXING ENVIRONMENT. TO LIGHT THATENVIRONMENT WITH DIFFUSED LIGHT IS ESSENTIAL.
HAVING A GOOD LIGHTING WHICH ADDRESS YOUR REQUIREMENTS ISALSO OF PARAMOUNT IMPORTANCE. IT'S NECESSARY TO PROVIDE WITH AFLEXIBLE LIGHT SYSTEM. IT HAS TO BE ABLE TO BE EASILY ADJUSTED TODIFFERENT SCENARIOS AND NEEDS.
THE LIGHTING SYSTEM RECOMMENDED IS DIVIDED IN 2 ELEMENTS:
ONE LIGHTING CIRCUIT WILL BE LOCATED ABOVE THE UTILITIES. IT WILL BE FORMED BY 3 SPOTLIGHTSPROVIDING THE DEMANDED TASK LIGHTING. THE LIGHT WILL BE PERFECTLY AIMED TO THE WORKINGSURFACE. THE DESIGN WILL ENSURE A FREE GLARE DISTURBANCE LIGHTING SYSTEM IN THE DECK.
TO PROPERLY DETERMINE A LANDSCAPE LIGHTING SYSTEM IS NECESSARY TO KNOW THESURROUNDINGS OF THE HOUSE. DEPENDING ON THE CHARACTERISTICS OF THE AREADEFINED OUT OF THE HOUSE WILL BE USED AS PLAYGROUND, RESTING AREA OR SIMPLY ASUGGESTIVE BACKGROUND FORMED BY THE VEGETATION.HOWEVER, APART FROM TASK LIGHTING WHEN NEEDS, A LIGHTING SYSTEM WILLENHANCE THOSE ELEMENTS CREATING A TEXTURED BACKGROUND, THROUGH A SUBTLEAND SOFT LIGHT, GIVING DEPTH TO THE GENERAL PERSPECTIVE.
FOR INSTANCE, IT DEPENDS ONWHAT IS ON THE OTHER SIDE OFTHE SMALL WALL, WHICH CLOSESPART OF THE MAIN DECK, ADIFFERENT TYPE OF RECESSEDLIGHT FITTING MAY BE REQUIREDAS THE LIGHT PROVIDED ISCOMPLETELY DIFFERENT. (EVEN AHIDDEN SPOTLIGHT MAY BE GREATTO UP-LIGHT A TREE PROVIDING ASUGGESTIVE EFFECT WHICH WILLBE A PERFECT VISUALCOMPLEMENT WHILE ENJOYINGA GATHERING IN THE DECK.
I FOUND APPROPRIATE SUGGESTING AGAIN ALOCATION OF A NON-INTRUSIVE LIGHT SYSTEM INSIDE
THE SKYLIGHT. IT WILL MAKE THAT SPACE SO COZYAND INTIMATE (IT CAN BE CONTROLLED BY THE
MASTER BEDROOM THROUGH A 2 WAY SWITCH,ADDING AN EXTRA VALUE TO IT)
A SUBTLE LANDSCAPE LIGHTING WILL BE THE PERFECTCOMPLEMENT FOR THIS SUGGESTED SOFT LIGHT(IN ADDITION OF THE LIGHT OF THE STARTS THE
SYSTEM WILL ALLOW THE USER TO ENJOY)
E: 1/100
A DIMMABLE CIRCUIT FORMED BY ANASYMMETRIC DOWNLIGHT AND A COUPLE OFWALL LIGHTS LOCATED ON THE OPPOSITESIDE, WILL PROVIDE A NICE INDIRECT LIGHT. ITWILL GIVE CHARACTER TO THE SMALL SPACEAS A TRANSITIONAL SPACE THAT CONNECTSBOTH THE EXTERIOR WITH THE INTERIOR.
MOD.: 2015/06/21
06/08
2015/06/21LIGHTING CONCEPTS. MASTER BEDROOM, EN-SUITE
E: 1/100
IP RATED LOW POWERED LED STRIP LOCATED IN THE SIDE OF THE STEP FORMED BY THESHOWER GIVING A SUBTLE WASH OF LIGHT TO THE LATERAL OF THE BATH.
TINY 2W LED DOWNLIGHT AIMING DIRECTLY THE BATHROOM. IT'S AN IDEAL LIGHT FORTAKING A RELAXING BATH AND ALSO USEFUL WHEN YOU FEEL LIKE A READING. IT WOULD BECONTROLLED EITHER SEPARATELY OR AT THE SAME TIME THAT THE LED STRIPS, WHICH CREATE
A SUGGESTIVE ATMOSPHERE LIT WITH SOFT LIGHT.
A LOW POWERED LED PLACED UNDERNEATH THE VANITY. IT WILL AIM THE WALLAVOIDING ANY UNDESIRABLE REFLECTION ON THE FLOOR (DEPENDING ON HOW
GLOSSY THE TILES ARE, IT MAY CREATE GLARE DISTURBANCES).
A LIGHTING FITTINGS PLAY AN IMPORTANT PART OF THEFINAL DESIGN, SO IT'S IMPORTANT TO COUNT ON THEOTHER ELEMENTS (MIRROR, VANITY, BASIN).HOWEVER I MAY SUGGEST ONE LIGHTING SOLUTION IALWAYS FIND ELEGANT:A CLUSTER OF 3 MINI PENDANTS LOCATED AT ONE SIDETO THE MIRROR AND A UNIT LOCATED TO THE OTHERSIDE PROVIDES AN AMAZING EFFECT TO THE WHOLE.
WHAT YOU REALLY NEED IN A WALK-IN WARDROBE IS AFREE-SHADOW LIGHTING SYSTEM WHICH COMPLETELY FILLSTHE ROOM WITH DIFFUSED LIGHT. THAT LIGHT WILL BEPROVIDED BY A RECESSED LARGE SIZE LINEARFLUORESCENT LIGHT. IT IS A SOPHISTICATED ANDNON-INTRUSIVE LIGHTING SOLUTION.
A COUPLE OF MINI PENDANTS FRAMING THE BED WILL PROVIDE AN ELEGANT LIGHTING SOLUTION, ASGENERAL LIGHT COMPLEMENTING THE LIGHT PROVIDED BY REFLECTION IN THE OPPOSITE WALL OFTHE ROW OF DOWNLIGHTS.THEY WILL ALSO WORK AS A PERFECT READING LIGHT AS THEY WILL BE CONTROLLED SEPARATELY BYA DIMMER WHICH PROVIDES A COMPLETE FLEXIBILITY.
i WAS TEMPTED TO PLACED A COUPLE OF DOWNLIGHT TOTHOSE WALLS BUT IN MY OPINION, AN OVER LIT SPACE ISAS BAD AS AN UNDER LIT. (AND YOU WILL NEED SPACEFOR UTILITIES, SUCH A RAIL TOWEL, ETC...)THE ELEMENTS OF THE EN-SUITE ARE ENHANCED BY THEIROWN LIGHT AND THEY WILL SPACE WITH NO LIGHT FORTHEM TO "BREATH".
A RECESSED LED LIGHT WILL PROVIDE THE ESSENTIAL LIGHTAT NIGHT. THE LOCATION HIDDEN IN THE SMALL CORRIDORENSURES A NOT DISTURBINGLIGHTING SYSTEM.
A ROW OF DOWNLIGHT ARE INSTALLED CLOSE TO THE WALLTO USE IT AS REFLECTOR. THEREFORE, THE ROOM WILL BEFILLED WITH REFLECTED LIGHT WHILE THE WALL IS NICELYWASHED WITH LIGHT.IT WILL BE CONTROLLED BY 2 WAY SWITCH WILL MAKEPERFECT AS A GENERAL LIGHT.
BEING CONTROLLED BY A 2 WAYSWITCH, BOTH SIDES OF THE BED,ENSURES ITS FUNCTIONALITY.
DEPENDING ON THE FINALDESIGN, SOME LED STRIPSCOULD BE STRATEGICALLYLOCATED IN SOME SHELVESTO PROVIDE A LOW LEVEL OFLIGHT AS THE REQUESTED.
MOD.: 2015/06/21
07/08
2015/06/21LIGHTING CONCEPTS. BEDROOMS - MEDIA ROOM - STUDIO.TO PROVIDE THE NECESSARY GENERAL LIGHT IIN THE BEDROOMS I SUGGESTED A SIMPLEAND WELL DESIGNED PENDANT LOCATED IN THE CENTRE OF THE ROOM WHICH WILLFILL THE SPACE WITH DIFFUSED LIGHT.A SIMPLE DRUM CAN BE USED TO LIGHT UP THE ROOM. (IT COULD BE CUSTOM MADE TOMATCH COLOR OF WALLS, BEDCLOTHES, ADDING A PERSONAL TOUCH TO THE ROOM).A DIFFUSER WILL BE LOCATED AT THE BOTTOM TO ENSURE A EYE-FRIENDLY LIGHTDISTRIBUTION.
HAVING NOTICED THAT THE DISTRIBUTION OF THEBEDOOMS ARE QUITE ACCURATE, WE CAN SUGGESTWALL LIGHTS AS SPECTACULARLY WELL DESIGN ASTHE ONE AS SHOWN. LOCATED AT THE RIGHT HEIGHT,IT IS A PERFECT CHOICE AS READING LIGHT.
E: 1/100
A RECESSED ASYMMETRIC LED WILL BE PLACE IN A RIGHTPLACED TO PROVIDE A MORE THAN USEFUL NIGHT LIGHT.IT WILL BE CONTROLLED BY A 2 WAY SWITCH LOCATED INEACH SIDE OF THE BED.
THE SIMPLY LINES OF A LINEAR FLUORESCENT FITTINGWILL PROVIDE A DEMANDED DIFFUSED TASK LIGHT.IT MUST BE COMPLETE THE DESIGN OF THE WHOLE UNIT.AND LED STRIP LOCATED UNDERNEATH THE VANITY WILLPROVIDE A EYE-GENTLE LIGHT AT NIGHT.
THE LIGHTING SYSTEM IN THE OFFICE HAS BEEN DIVIDEDIN TWO CIRCUITS, ONE OF THEM DIMMABLE.
THEREFORE, THE INTENSITY OF LIGHT CAN BE ADJUSTEDAS DEMAND AS WELL AS A AMBIENCE LIGHT. THERE IS
NOTHING BETTER THAN A RELAXING ENVIRONMENT TODO PAPER WORK OR TO SWIM ON THE INTERNET.
AN APPROPRIATE LIGHTING SYSTEM FOR A MEDIA ROOM IS WHATPROVIDES YOU A SOFT AND LOW LEVEL OF LIGHT TO HELP YOUREYES TO ADAPT TO THE DIFFERENT INTENSITIES OF LIGHT PRODUCEDBY THE SCREEN, AND TO FULFILL THE ROOM WITH LIGHT WHEN IT'STIME TO TIDY UP.A DIMMABLE CIRCUIT CONTROLLING LIGHT FITTINGS WITH THEHORIZONTAL COMPONENT OF LIGHT BLOCKED WILL DO PERFECTLYTHE WORK.THEY MAY BE AS UNIQUE AS THE ONES SHOWN BELOW.
MOD.: 2015/06/21
08/08MOD.: 2015/06/21
2015/06/21LIGHTING CONCEPTS. NIGHTLIGHTA 'NIGHTLIGHT' SYSTEM IS ESSENTIALLY A GROUP OF LIGHT FITTINGS THAT PROVIDE A SOFT AND LOW INTENSE LIGHTAND IT'S USED TO HELP THE USERS TO REACH THE UTILITIES OF THE HOUSE THROUGH A EYE-GENTLE LIGHT.WHETHER YOU ARRIVING AT HOME WITH YOUR CAR, GETTING OUT FROM YOUR BEDROOM TO THE KITCHEN OR YOUWILING TO GO TO THE KITCHEN TO HAVE A GLASS OF WATER AFTER HAVE BEEN ENJOY MOVIE, A LEADING LIGHT WILLSOFTLY LIGHT UP YOUR STEPS...
HAVING CLEAR THAT THE PROPOSED LIGHTING SOLUTION WILL USE SOFT LIGHT, FREE OF ANY GLARE DISTURBANCES, WE JUST NEED TO WORK OUT AND SUGGESTA SENSIBLE WAY TO CONTROL IT.
LIGHT FITTINGS LOCATED IN COMMON AREAS WILL BE ACTIVATED THROUGH A MOTION SENSOR. THAT WAY, NO MATTER WHERE THE USERS WERE OR WHAT THEYMAY KEEP THEIR HANDS BUSY, WHETHER THE LEVEL OF LIGHT IN THE SPACE IS NOT ENOUGH FOR THEY TO CROSS AN SPACE, THE MOTION SENSOR WILL SWITCHON THOSE LIGHTS. (LEVEL OF LIGHT AND TIME DURING THOSE LIGHTS ARE SWITCHED ON CAN BE EASILY SET).
FITTINGS LOCATED AT PRIVATE PLACES SUCH BEDROOMS OR BATHROOMS, WILL BE ACTIVATED BY A SWITCH. THAT WAY TO WILL HAVE FULLY CONTROL OF THEMAND THEY WON'T BE ACTIVATED UNNECESSARY.
1 /17
inl_0013
Quail Ridge Country Club’s Showroom II.
82 Rainbow Falls Road. Kerikeri. Northland
Stefano La Cava. Lighting Solutions.
Mb: 021 773 221; [email protected]
40 High street Island Bay. Wellington 6023 NZ
JUNE/2015 (+64) 220 156 096 [email protected]
Lighting Specifications. Interior. 2015/07/06
Type A1/2:
Garage/Laundry.
G0601-
(Formalighting)
To provide general light, we suggest using
this high quality system: recessed Trim linear
luminaire with overlapped tubes providing
continuous line of light with an even light
distribution. AS a task light above working
surfaces, it’s also a great non-intrusive
system to provide a demanded task light.
Housing made of extruded aluminium with
die-cast end caps mechanically attached
with no exposed fasteners. Easy installation
via adjustable brackets. Reflectors with pure
aluminium. Opal diffuser.
White powdercoated. Electronic Ballast
(surface mounted and suspended options
are also available)
G0601154TOFA.11: Dim: 2368L x 70H x 118D;
Cut Out: 60mmx 2350mm
Lamp: 2x 28W 3000K Fluorescent
G060154TOFA.11: Dim: 1184L x 70H x 118D;
Cut Out: 60mmx 1175mm
Lamp: 1x 28W 3000K Fluorescent
(Tubes included)
Type B1: Garage.
1914.0007.4
(Macrolux)
Nicely designed wall fitting with glass
diffuser. Steel bodied with silky white finish. It
belongs to a family of fittings of different
sizes and finishes as shown in the next page.
Dim.: 112mmL 112mmH x 100mmD
Lamp: 1 x 50W G9 Halogen
(Lamp included)
2 /17
Type B: Garage
1914.0011.4
(Macrolux)
Surface mounted fitting with glass diffuser.
Steel bodied with silky white finish.
I suggested using the next step up of the
family as it allows us to use a higher lamp
increasing the light level in both extremes of
the garage. it will provides an eye-gentle
task lighting and they will visually balance
with each other.
(available: texturized black, aluminium
grey, brushed stainless, glossy stainless steel)
Dim.: 282mmL 112mmH x 100mmD
Lamp: 1 x 100W R7s 117mm Halogen
(Lamp included)
Type C: Wardrobe. FTM-TP-025-AW-WW-02
(Signcomplex)
A surface mounted IP65 LED strip unit to be
installed inside storage units. Installed just
above the frame of the door ensures a nice
wash of light aiming the storage items free
of glare disturbances. I can be controlled
by a switch door or a motion sensor
(recommended when sliding doors)
Dimensions: 1500L x 40Wx 39H
Lamp: 20W 24V 2700-3200K LED
Power Supply: 20-30W 24V (P. Supply included)
Type D1: General Light
RA07.K30D38.11
(Formalighting)
Recessed 10W LED with asymmetric light
distribution. Its deep regressed lamp position
designed for minimum glare aiming the
vertical surfaces used as reflectors.
Dim.: 99mmDiam 116mmH
Lamp: 1x 10W 3000K 38Dg LED
Driver: 6-12W 350mA 12V - Dimmable
(Lamp and driver included)
3 /17
Type D2: General Light
RA05.K30D38.11
(Formalighting)
Recessed 10W LED with symmetric light
distribution. Made of cast-die aluminium
with white powdercoated finish.
The lamp is slightly set back minimizing its
glare. Controlled by a dimmable driver the
intensity can be adapted on demand.
Dim.: 99mmDiam 116mmH
Lamp: 1x 10W 3000K 38Dg LED
Driver: 6-12W 350mA 12V - Dimmable
(Lamp and driver included)
Type D3: Lounge
5333.11
(Formalighting)
We used the smallest version of the family to
add a suggestive lighting in the centre of
the lounge. Using a narrow beam bulb will
ensure a gentle light on a centred table.
It’s a nice complement for the general light.
Dim.: 76mmDiam 113mmH
Lamp: 1x 4W MR11 3000K (24Dg)
Driver: 3-6W 350mA 12V
(Lamp and transformer included)
Type E1: Bedroom
131.0010.4
(Macrolux)
This fantastic and unique design of a
recessed light fitting, which installed at a
right height, is a perfect reading light.
It’s made of aluminium with black or white
finish. It can house 1W LED lamp but I
suggest the Halogen version as it allows us
to use a bulb with higher output.
When the oscillating part is closed, a micro-
switch turns off the lamp automatically.
Dim.: 75mmWx 195mmH x 87mmD
Cut Out: 50mmW x170mmH
Lamp: 1x 20W GY6.35 12V Halogen
(Lamp and transformer included)
4 /17
Type E2: Bedroom
1612.0002.44
(Macrolux)
This elegant and nicely design wall fitting will
allow you to put the light in the right place.
It has an extension of 300mm housing a
narrow beam 1.2W LED. It makes perfect to
use as reading light.
Made of lacquered aluminium in white and
black with an adaptable arm covered with
polyurethane.
(Different installation options available.
Direct installation in wall has been quoted)
Dim. base: 46Hx 20W x 30D
300mm Extension
Lamp: 1x 1.2W 320mA 10Dg
Driver 1.122426: 6W 350mA 12V
(Remote Driver included)
Type F1/2: Bedroom 500mm DRUM
(YOUG Design)
As you “dress” the bed, you complete the
scenario with a simple drum with a fabric
you like. Steel bodied with white powder
coated Translucent fabric (standard quality)
will be used to shape the drums.
It will fulfil the space with diffused light and it
will add a suggestive effect through a back
lit texture. Acrylic Opal polycarbonate
diffuser at the bottom.
Dimensions: 500Ø x 120W x 240H
Fixing area: 120mm Diam
Lamp: 3 x 60W E27
(Lamps included)
5 /17
Type G: Leading Light
(Suggestion 01)
125.0021.4
(Formalighting)
We have a fantastic opportunity to use a
greatly designed and unique light fitting as
a “leading night”. A recessed Ip66 white
metal unit will disappear for about 1cm
from the surface.
3.4W LED will wash gently with light the
surfaces helping you to reach what you
need at night. A proper positioning on the
walls will ensure a light without undesirable
reflection which may disturb the users at
night when the sight is so sensitive.
Dim.: 210mmH x 18mmW x 46mmD
Lamp: 1x 3.2W 24V 3000K LED
Plaster box ref. 131.0008 (Plaster Kit)
Driver ref. 1.122156: 10W 24V DC
(P. Supply included)
Type G: Leading Light
(Suggestion 02)
LN11125AB
(Luce & Light)
However, there is a fantastic option we can
use to provide the leading light at night.
It’s an asymmetric recessed fitting that
ensures an eye-gentle lighting system at
night through a 1W LED.
Steel bodied with mate white finish.
Dimensions: 70H x 60H x40D
Cut out: 55mm x38mm
Lamp: 1W 350mA 3000K
Driver ref. A13350VL: 1-3W 350mA 12V
(Lamp and driver included)
6 /17
Type H: Skylights
RD22.11
(Formalighting)
A skylight is an interesting element which
adds a suggestive lighting effect when it
captures daylight. It depends on its design it
will add either a direct light to the space or
a diffused one if the sun rays is reflected in
the vertical surfaces. Providing a similar
lighting effect through reflected artificial
light, adds a priceless value to any space.
An IP 44 recessed light fitting is installed at
the top of it connected to the night light
circuit creating a suggestive “moonlight
effect. It’s made of die-formed galvanised
steel with frosted safety glass.
Dim: 90H x 90W 131D; Cut Out: 80Hx 80W
Lamp: 4W GU10 240V 3000K
(Lamp included)
Type I: Skylights
G040130BOFA.K30
(Formalighting)
Installing closer a recessed light fitting with
higher output will provide a beautiful
diffused light filling the space.
It will make the skylight looks the light fitting.
In this case, we’ll use an LED unit of the Gola
40 family. It’s housed in extruded aluminium
with die-cast end caps. Extruded ribbed
satin white diffuser. Reflector made of super
pure aluminium with miro-silver coating.
Passive dissipation, inclusive of integral driver
220-240V 50/60Hz.
Dim: 898L x 50W 80D; Cut Out: 884Hx 80W
Lamp: 30W GU10 240V 3000K
(Driver included)
7 /17
Type J1-2: Night Light
PF260-
(Luce & Light)
Surface mounted LED strip installed
underneath the vanity. It’s fixed with
brackets and can be tilted toward the
vertical surface ensuring a reflected and
soft lighting system. Therefore there won’t
be undesired reflections on the likely glossy
floor covered with tiles.
Aluminium bodied with silver coating finish
coming with PMMA diffuser.
J1-PF26015DA Dimensions: 448L x 25W x19D
Led TYPE: 4.8W/m 24V 3000K
J2-PF26025DA Dimensions: 873L x 25W x19D
Led TYPE: 4.8W/m 24V 3000K
P. supply AS24010X2: 10W 24V (76x36x18) (P. supply included)
Type K: Mirror 199.0002.14
(Macrolux)
The most suitable fitting to provide a
demanded level of light depends directly
on the final design of the bathroom and
how will be the mirror which will be installed.
It was to be coherent with the whole.
However, I suggested this fitting because I
liked its design with simple lines and it will fills
the room with diffused light, essential factor
to take into consideration to light your face
through a shadow-free light.
Steel bodied with brushed steel finish
coming with a diffuser made of
methacrylate for a uniform lighting result.
Dimensions: 530Ø x 112W x 100H
Lamp: 1x 36W 2G11 3000K Fluorescent
(Lamp included)
8 /17
Type L: Bathroom
RE47.11
(Formalighting)
IP 54 Rated round downlight with frosted
safety glass. Trim is cast aluminium bodied
with silicone water-sealed.
Independent steel housing
Dim: 84Diam x 107D;
Cut Out: 73mm Diam
Lamp: 10W GU10 3000K
(Lamp included)
Type M: Office 1228.K30.75
(Formalighting)
To provide the necessary light in the office, I
suggest either using one of “the big
brothers” of the family of fittings used in the
garage, or this fantastic linear fitting with an
adjustable screen which allows you to
adjust the light distribution (from task light to
mood light with an easy movement).
Steel bodied, aluminium extruded screen
with acrylic opal satin diffuser.
Dimensions: 956mmL x 126W x 79D
Fixing area: 956mmL x 36mmW
Lamp: 1x30W 3000K LED
(Dimmable driver included)
Type N. En-suite RD39.K30D40.11
(Formalighting)
This tiltable tiny IP 44 downlight properly
installed above the bathroom will provide
you with a soft light and it allows to read
while taking a relaxing bath. Together with
the LED strips, which provide indirect light,
will create a suggestive ambience.
Made of cast-aluminium with optimal
passive thermal management. White finish
Dimensions: 49Ø x 37H; Cut out: 44Ø
Lamp: 1x 2W 3000K 40Dg
Driver: mA?
(Driver included)
9 /17
Type O: En-suite
(suggestion 01)
14SPWH01
(Karboxx)
Taking into consideration the en-suite as
one of the feature of the house, I might
suggest a unique an elegant lighting system
for the mirror.
Having a closer idea of the final design will
be essential,. However, looking at what I
suggest may otherwise help you to design it.
Few beautifully designed mini-pendants of
frosted glass providing diffused light
installed framing the vanity will look
gorgeous. Installing a large size mirror over
the vanity and counting on the reflection of
the fittings in will look even better.
Blown glass in white (available in black
glass). Cord and fixture black
Dimensions: 150mm x 900mm
Lamp: 1x40W E27
(Lamps included)
Type O: En-suite
(suggestion 02)
1920.0001/2
(Macrolux)
Other option that I would like you to take
into consideration is this unique light fiting
Having a closer idea of the final design will
be essential. However, looking at what I’m
suggesting may help you to design it.
This nicely design and unique hybrid
between a recessed and a ceiling-
mounted lamp, a fusion between a lighting
source and a fixture provides an exclusive
character to the bathroom.
Diffuser made of fiberglass and fabric
patch-work. Powder coated steel bodied.
Dim.1920.001/2: 118Diam 500/750H x 100D
Lamp: 1x50W GU5.3 MR16 12V HAL
(Lamp and transformers included)
10 /17
Type P: Kitchen G09511DI39TOUP
(Formalighting)
Up & Down lighting system controlled
separately. It will fill with diffused light the
wardrobe and having both components
separately will provide eventually a gentle
indirect lighting when you is not necessary
to use the full. It will minimize any possibility
to disturb the person who stay in bed.
Housing made of extruded aluminium with
die-cast end caps mechanically attached
with no exposed fasteners. Easy installation
via adjustable brackets. Reflectors with pure
aluminium. Opal diffuser.
White powdercoated. Electronic Ballast
(surface mounted and suspended options
are also available)
Dim: 1832L x 95W x 150H
2200mm installation height
Lamp: 3x 39W T5 3000K Fluorescent
(Tubes included)
Type Q: Master Bedroom
(suggestion 02)
31.0006.81
(Macrolux)
As elegant as unique way to provide
reading light and character to the Master
bedroom.
There are few colour to choose from, as
shown in the picture aside.
550mm long mini pendant with white fabric
effect finish.
Dim.: 152mmDiam 550mmH
Lamp: 1x100W E27 HAL
(Lamps included)
11 /17
Type R: Kitchen
PF1625DA/35DA
(Luce & Light)
LED strip mounted vertically inside the
pantry aiming the wall, providing an even
lighting at the shelves. The same profile is
used to provide task lighting in the kitchen.
It will be installed recessed under the
cabinets. Anodised aluminium bodied with
PMMA diffuser
Dimensions: different lengths x 25H x19D
Lamp: 15W/m 24V 3000K LED
(P. supply included)
Type S: Kitchen
RA11.K30D38.11
(Formalighting)
A row of three recessed Square washers will
be installed recessed in the volume formed
above the kitchen peninsula. They will
provided a general light washing with light
the ceiling. It complement perfectly the
task lighting in the kitchen giving a nice
indirect lighting effect, which can be left
when the kitchen is not used, enhancing
the way it’s perceived.
Dimensions: 99mmL x 99mmH x 117mmD
Cut out: 94mm x 94mm
Lamp: 10W 3000K 38Dg LED
(Dimmable driver included)
Type T: Kitchen
12SPWH01.DIMM
(Karboxx)
Amazingly designed family of fittings that I
suggested to use above the peninsula and
framing the fire place.
White painted aluminium with opaline
methacrylate. It’s dimmable so the intensity
can be adjusted as demanded.
Dims: 1240mmL x 150mmW 144mmH
(1900mm Installation Height)
Fixing plate: 80mm Diam
Lamp: 2x21W T5 Dimmable
(Tubes included)
12 /17
Type U: Lounge_Fireplace
12PAWH44
(Karboxx)
The fact of putting a fitting which belongs to
the same family of the fitting that gracefully
divide the kitchen of the lunge, which
produce such a unique light distribution, will
connect visually the 2 areas of the it.
White painted aluminium with opaline
methacrylate.
Dim.: 440mmL x 150mmH 10.5mmD
(1800mm Installation Height)
Lamp: 2x11W E14 Fluorescent
(Lamps included)
Type V: Lounge_dinning
10SPWH01
(Karboxx)
Suspended lamp with shade in Honeycomb
canvas fabric, in white or black. Ceiling
fitting in white-painted metal. It’s coming
with an opaline diffuser at the bottom,
which it’s important for ensuring a gentle
light distribution.
It’s clear that even though it doesn’t belong
to the same family, the fragmentally way to
come out the light makes talking coherently
with the other suggested light fittings.
The fittings used in the lounge have to be
decided at the main time that the rest of
the pieces and furniture which will give
character to the whole space will connect
the areas with each other
Dim.: 600mm Diam x 410mmH
(1800mm Installation Height)
Fixing plate: 140mm Diam
Lamp: 3x42W E27 Halogen
(Lamps included)
13 /17
Type W: Media Room
10SPWH01
(Karboxx)
Wall-mounted lamp with adjustable screen
in white painted metal or brushed nickel.
A dimmer will control the light fittings to
adjust the intensity, quite essential for a
lighting system of a Media Room.
Being adjustable allows you to adjust the
amount of light that is washing the walls
and the ceiling. It means that lighting
system is so gently with the eye and so
versatile with the ambience.
Dim.: 600mm Diam x 410mmH
(1800mm Installation Height)
Fixing plate: 140mm Diam
Lamp: 3x42W E27 Halogen
(Lamps included)
14 /17
Lighting Specifications. Exterior. 2015/07/07
Type Ex1: Main Entrance
LT10125LAV
(Luce&Light)
Enhancing the way the main entrance is
perceived is of paramount importance.
Placing a couple of up lighters in each
corner of the column that frame the
entrance will magnify it.
This IP 67 small in-ground fitting, will provide
an up-lighting effect which will gracefully
balance the light coming from behind from
the fittings nearby the door.
Body in anodized aluminium and tempered
glass with anti-scratch treatment.
With outer casing (ref: WC4010)
Dim.: 47mmDiam 63mmH
Lamp: 1x 2W 500mA 3000K (20Dg)
Driver ALS500IP67 : IP67 1-6x 2W 500mA 24V
(Driver included, shared by 4 units)
Type Ex2: Garage LT20005DAV
(Luce&Light)
I suggested located a couple of in-ground
uplighter from the same family but with a
different lighting effect. In this occasion, I
use a more powerful LED but with a wide
angle with a frosted diffuser.
It will wash with diffused light the sides of the
garage. Placing a couple of plants in
between can provide an interesting effect.
Dim.: 71.5mmDiam 99mmH
Lamp: 1x 6W 350mA 3000K (Flood light)
Driver AS24070X3 : IP67 70W 350mA 24V
(Driver included, shared by 4 units)
15 /17
Type Ex3.1: Lantern 1966616
(Platek)
Original designed wall light coming in 2
versions: vertical and horizontal fixing.
The proposed combination will provide a
unique character to the entrance reflecting
on the horizontal and vertical surfaces.
Body made of extruded aluminium alloy,
corrosion resistant. Ring and fixing base
made of die-cast aluminium alloy, corrosion
resistant. Protection by means of iridite,
epoxy powder base coating and polyester
painting. LED light source integrated in the
aluminium body to avoid vandalism.
Product with no visible screws and
completely hidden fixing plate.
Dim.: 313mmL 56mmW 250mmH
Lamp: 1x 7W 3000K LED (Ex3.3 1x14W 3000K)
(Driver included)
Type Ex3.2: Lantern 1966616
(Platek)
Horizontal placed. It will use as well the
ceiling to distribute the light.
When it’s vertical placed, the light wash
down the wall creating an original lighting
effect. It belongs to a big family that can
be use around the landscape.
Body made of extruded aluminium alloy,
corrosion resistant. Ring and fixing base
made of die-cast aluminium alloy, corrosion
resistant. Protection by means of iridite,
epoxy powder base coating and polyester
painting. LED light source integrated in the
aluminium body to avoid vandalism.
Product with no visible screws and
completely hidden fixing plate.
Dim.: 313mmL 56mmW 250mmH
Lamp: 1x 7W 3000K
(Driver included)
16 /17
Type Ex4: Garden
9402116
(Platek)
This fitting has a fantastic way to spread the
light downwards in all directions.
Mounted on spike allows you to place it
freely in your garden.
Body in black anodized and corrosion
resistant aluminium alloy. Anti-UV
transparent polycarbonate diffuser - 15 mm
thick. Carbon fibre rod. A4 stainless steel
screws. Protection by means of iridite,
epoxy powder base coating and polyester
painting. LED light source integrated in the
aluminium body to avoid vandalism.
Product with no visible screws.
Product supplied with one power supply
cable 5m in length.
Dim.: 180mmDiam 600mmH
Lamp: 1x 11W 3000K 360Dg 240V
(Driver included, c/w 5m wire)
Type Ex5.1/2: Skylights
RD/E18.K30.11
(Formalighting)
I’ve said previously the great idea of using
the surfaces that formed the skylight as
supports and reflectors of a lighting system.
It is a non-intrusive and eye-friendly way to
provide a demanded light in the exterior.
They will be controlled with a dimmer to
ensure a flexible system. In its lowest level
will beautifully create a moon light effect
perfect for relaxing evenings spent outside.
Galvanized Steel bodied with a trim made
of die cast aluminium. Frosted safety glass.
RD18.k30.11 Dimensions: 175L x 175W x141D
Cut out: 165mm x165mm
Lamp: 25W 3000K 12V
Re18.k30.11 Dimensions: 90L x 90W x141D
Cut out: 80mm x 80mm
Lamp: 12W 3000K 12V
(Dimmable Driver included)
17 /17
Type Ex6: Deck
3070116.11
(Platek)
Fantastic high quality and fully adjustable
spotlight that will allow a task lighting where
is needed and accent lighting if desired.
Body and wall mounting made in corrosion
resistant and painted aluminium alloy.
Protection with anodic treatment, epoxy
powder base coating and polyester
painting. Diffusing opal PMMA cover.
Product with no visible screws.
Dim.: 85mmDiam 170mmH
Fixture: 85mm DIam
Lamp: 1x 9W 3000K LED
(Driver included)
Type Ex7: Decks
3455911.08
(Platek)
Frame is a beautifully designed IP 65 fitting
with simple lines that wash the surfaces with
light with an asymmetric distribution.
It’s for that because is a perfect choice to
light up surfaces with a fitting without any
glare disturbances
Die-cast aluminium body and locking ring.
Protection by means of iridite, epoxy
powder base coating and polyester
painting. A4 stainless steel screws. 6mm
extra-clear flat tempered glass cover.
External power supply by 12V DC
transformer. Nylon sleeve to be ordered
separately. Product supplied with one
power supply cable 0,3m in length.
Dimensions: 205mmL x 50mmW x72mmD
Cut out: 195mm x 62mm
Lamp: 5W 3000K 12V 54Dg Asymmetric
(Transformer included)