53035202510150

0

4

8

21

61

02

42

82

23

061041021001080604020

)zH 06( MPR 5271 @ yticapaC0.1 ytivarg cificeps retaW- diuqiL 13.2 yb edivid ,isp ot trevnoC)*(

]Wk 52.0[ PH 3/1 seireS 375 = A]Wk 73.0[ PH 2/1 seireS 375 = B]Wk 65.0[ PH 4/3 seireS 475 = C

]Wk 57.0[ PH 1 seireS 475 = D

]*.tf[ ]m[

]mpg .S.U[

To

tal H

ead

m[ 3 ]h/

D

C

B

A

0

1

2

3

4

5

6

7

8

9

INLI

NE

3" C

IRCU

LATO

R PU

MPS

HVM-11

Inline 3˝ Circulator Pumps• Cast Iron or Silicon BronzeConstruction

• EPDM/EPR Mechanical Sealand Casing O-Ring, Buna-NOption Available

• Silicon Bronze Impeller

• Mounting Flange Kit for 3˝NPT Included

• Maximum Working Pressure150 PSI

• Maximum Temperature 225° F(107° C)*

• Maximum Flow 150 GPM

• Maximum Head 28 Ft. (12 PSI)

• Single Phase or Three PhaseTEFC 56C Motor

®

A Gorman-Rupp Company

400 Spring Street • Royersford, PA 19468 USA

www.amtpump.com • 888-amt-pump (268-7867)For use with nonflammable liquids compatible with pump component materials. Viton® and Teflon® are registered trademarks of E. I. Dupont.

AMT Inline Circulator Pumps aredesigned for continuous dutyindustrial/commercial systems.Pumps are available in a varietyof material configurations tomeet your specifications. Pumpsare powered by a 56C NEMAframe electric motor with 1/2"conduit connection. Pumps areinterchangeable with othermanufacturers, see cross refer-ence on specification page.

*Maximum temperature appliesto water only.

Model 5740-97Bronze Circulator

Performance of 3" Inline Circulator Pumps

**This dimension may vary due to motor manufacturer's specifications (+) 3-Phase models can also operate on 50 Hz. (This will change full load amps, service factor and RPM.) NOTE: Dimensions are in inches (centimeters) and have a tolerance of ± 1/8"NOTE: Electric supply for ALL motors must be within ±10% of nameplate voltage rating (Ex. 230V ± 10%= 207 to 253)

‡ When ordering add the correct -9x suffix to model number indicating material selectionXCI (-95) = Cast Iron ConstructionXB (-97) = Cast Bronze Construction

Flange to Bell & Gossett Bell & Gossett Armstrong TACO DaytonModelSeries Flange Width Series (C.Iron) Series (Bronze) Series Series (C.Iron)

5735/5736 10 LD3 LD3AB S-45 122 4RC99 5730/5731 10 HD3 HD3AB S-46 131 4RD12 5745/5746 12 PD-35S PDB35S S-55 132 4RD13 5740/5741 12 PD-37S PDB37S S-56 133 4RD14

Manufacturer Cross Reference

PUMPS ARE DESIGNED TO MOUNT

HORIZONTALLY OR VERTICALLY

Model ‡ Curve HP PH ENCVoltage

@ 60 Hz +Full Load

Amps A** B C L** W H‡ Ship Wt.

(Lbs.)

5735A 1/3

1TEFC

115/230 7/414.0 [35.5] 10.0 [25.4] 3.0 [7.6] 17.0 [43.2] 8.0 [20.3] 11.1 [28.2]

785736 3 230/460 2/1 755730

B 1/21

TEFC115/230 9/5

14.0 [35.5] 10.0 [25.4] 3.0 [7.6] 17.0 [43.2] 8.0 [20.3] 11.1 [28.2]84

5731 3 230/460 3/2 77

5745C 3/4

1TEFC

115/230 12/615.0 [38.1] 12.0 [30.5] 3.2 [8.2] 18.0 [45.7] 8.2 [20.3] 13.2 [33.5]

905746 3 230/460 3/2 84

5740D 1

1TEFC

115/230 14/715.0 [38.1] 12.0 [30.5] 3.2 [8.2] 18.0 [45.7] 8.2 [20.3]

975741 3 230/460 4/2 91

13.2 [33.5]

®

A Gorman-Rupp Company

®

A Gorman-Rupp Company

Manufacturer of AMT & IPT Pumps400 Spring Street • Royersford, PA 19468 USA

www.amtpump.com • 888-amt-pump (268-7867)The Gorman-Rupp Company reserves the right to discontinue any model or change specifications at any time without incurring any obligation.

©2012 American Machine and Tool Company. All rights reserved.

Inline 3˝ Circulator Pumps

HVM-12

Standard Features• Mounting Flange Kit for 3" NPT, Which Includes (2) Flanges, (2) Gaskets, and Fasteners

• 4-Bolt Flange Allows 360° Mounting Rotation in 90° Increments

• 1/8'' NPT Seal Wash/Vent Port

• EPDM/EPR Mechanical Seal and O-Rings

• Optional Buna-N Mechanical Seal and O-Ring Available

• Stainless Steel (300 Series) Stub Shaft

• High Efficiency Closed Impeller

• Standard NEMA 56C Motor Mounting Dimensions

• Available in either Single Phase or Three Phase TEFC 56C Motors

• Maximum Working Pressure 150 PSI

• QSP: Quick Ship Pump for Many Models

1212

Pump Dimensional & Specification Data