inline finishing systemifinishingsystem.com/wp-content/uploads/2019/11/c1150.pdfperforation and...

14050 Simone Dr. Shelby Twp. Michigan 48315 , USA. Phone: 1-248-563-1623, Email: [email protected] Website: www.ifinishingsystem.com

Inline Finishing SystemThe Leader in Advanced Post-Printing Finishing

• Conveyor receiving is optional

• Can be connected to folder

Proudly designed and

manufactured in the U.S.A.

Creases, cross and jump perforates

C 1150 – The World’s Most Cost Effective

Computer Controlled

vacuum high pile feeder:

• 4.5” loading capacity is standard. 7.5” is optional

Cross Perforation or Crease

• Up to 24 cross perforations . • Or up to 24 creases.

Window’s based

control system

• Easy to use.

Jump Perf

• Up to 72 jump perforations for one sheet pass.

• Up to 6 jump perf head can be used

Optional slitting / score

module

• Two slots for different combinations

• Software or manual adjusted positions

Receiving table

• Metal block design for long machine life

• Great for small, middle to larger size printing and finishing shops

• One CF 1150 can replace two stand alone machines. (Creaser and perforator)

• Fast – up to 6,200 center creases per hour

• Perforated business card, “T” or “L” sharped coupon, tickets or others

• High Productive

Cro

ss

Perf

/Cre

ase

Inte

rch

ange

able

Jum

pPe

rf

Slit

ter

(op

tio

nal

)

Rec

eive

r

Fee

der



DFG’s C 1150 is a leading vacuum, top high pile feeding creasing and perforating machine. It can accurately make creases for the full range of paper up to 425 gsm. It prevents document toner cracking. It also can make jump and cross perforations for different types of perforated business cards within postcards, T or L sharped coupons, or tickets for direct mailer. Just input sheet length, width, weight, type of folding, perf points and click “Run”. The machine will do the rest. .

C1150 does not fold. Please refer to ACF series for knife fold

In one sheet pass, you can make up to

• 24 creases • 24 cross perforations and • 72 jump perforations• 6 Slits (optional)

“L” Perforated

“T” Perforated

“3” Perforated

crease

Cross perf

Jump perf

Creases, cross and jump perforates,

• First pass make x-y perforations,• Second pass make crease

Need two sheet passes



Due to continuous product improvement, specifications are subject to change without notice, Data is from field tests under optimal conditions and only for reference.

Speed: Up to 6,200 sheets per hour. (1 creasing at 5.5” for 11” sheet) Feeder – Vacuum top pile feeding 4.5”loading capacity (upgradable to 7.5”)Sheet size: from 5.5” x 8” to 13” x 19” (with long sheet kit, sheet can be 40”)Sheet weight: crease from 110 to 425 gsm. Perforation from 110 to 300 gsmNumber of Positive crease per sheet pass: up to 24. Number of Negative crease per sheet pass: up to 24. Number of max cross perf and jump perf: 24 and 72Crease depth control: fully automatic by software based on paper weightPerforation depth controlled by software based on paper weightNumber of strike perforation head: 2 is standard. 3 or 4 or 5 or 6 are optional

Power: Single phase. 115 V, 60 Hz, 5A or 220V, 50 Hz, 3AMachine size: 60” (L) x 25” (D) x 50” (H) Shipping Weight: 600 lbs.

Specifications:

Optional:

Long sheets kit – loading table and receiver

Ultra heavy creasing matrix

Ultra thin creasing matrix

Heavy perf kit

3rd and / or 4th and / or 5th and / or 6th strike perforation tool

Slitter Module

C Series – Creasers

World’s fastest – up to 9,000 sheets per hour

C1500 / C1150 / C1000 / PC20 /PC10

ACF Series – Creaser,

perforation and Knife

Folders. World’s fastest at

its class – up to 12,000

Folders per hour

ACF 1500 / ACF 1200 /

ACF 1000

You might also interest:

SCCF Series – Slit, cut, crease, fold and moreSCC Series – Slit, cut, crease and moreSCCF 65 / SCCF 40 / SCC 65 / SCC40

DFF series – Slit, Cut, Crease, two-dimensional perforation and Knife Fold and more. World’s fastest and most versatile – DFF 56 / DFF 32

DF series – Slit, Cut, Crease, two-dimensional perforation and more. World’s fastest and most versatile – DF 56 / DF 32

inline finishing systemifinishingsystem.com/wp-content/uploads/2019/11/c1150.pdfperforation and...

Documents