innospec iselux slc 8jan13 - nardev · iselux® slc inci name: water ... • exceptional...
TRANSCRIPT
S u r f a c t a n t C o n c e n t r a t e Iselux® SLC INCI Name: Water (and) Sodium Lauroyl Methyl Isethionate (and) Sodium
Lauroamphoacetate (and) Cocamide MIPA (and) Sodium Benzoate
Iselux® SLC is a concentrated surfactant blend developed for use in formulating
structured sulfate-free personal care products. It is an optimized blend designed for
use in cleanser formulas where the addition of a high level of oils or otherwise
incompatible materials is desired. This concentrate allows a formulator to quickly
and easily develop stable finished formulations. It is ideal for use in body washes,
shampoos and hand washes.
This blend is free from sulfates, EO, amides, and is readily biodegradable. All of its
components are derived from natural, readily renewable resources (plant derived)
Performance Benefi ts
• Structured liquid concentrate with a unique rheology profile that provides
lotion and cream-like textures.
• Unlike many structured systems, it is stable under freeze/thaw conditions.
• Mild and provides a dense, luxurious lather while leaving behind an
elegant after-feel on skin and hair.
• Exceptional performance and stability in the presence of high levels of oils
and fragrances, high density particles, high molecular weight polymers,
and other cationic ingredients.
• Easy to use and can be cold-processed.
• Typical use levels range from 40-50% (as is).
• Aids in retention of hair color.
T Y P I C A L P R O P E R T I E S Not intended for use in preparing specifications
Appearance @25°C Clear to slightly hazy liquid
Total Solids, % 44 minimum
Color, Gardner 4 maximum
pH (as is) 8.5-9.5
Viscosity, cps @25°C 3000 maximum
Foam Propert ies
Iselux® SLC allows for superior lather and foam quality in a formulation. As demonstrated in a foam cylinder test, an Iselux® SLC formulation containing
20% canola oil shows initial flash foam as well as the outstanding foam stability after 5 minutes of standing.
Ini t ia l F lash Foam 5 minute Foam
Exfoliating Bodywash
Featuring Iselux® SLC AC198
INCI ingredients Trade name (supplier) % w/w
A Water q.s to 100.00
Guar Hydroxypropyltrimonium Chloride Activsoft C-17 (Innospec) 0.20
Citric Acid (50% soln) Trace
B Trisodium Ethylenediamine Disuccinate Natrlquest E30 (Innospec) 0.50
C Sodium Chloride 3.00
D Water (and) Sodium Lauroyl Methyl
Isethionate (and) Sodium Lauroamphoacetate
(and) Cocamide MIPA (and) Sodium Benzoate
Iselux® SLC (Innospec) 50.00
Preparation Procedure
1 Prepare phase A with gentle mixing. Once completely dispersed, add trace amounts of citric acid solution until mixture clears.
2 Add phases B and C while continuing to slowly mix.
3 Slowly blend in phase D and mix until uniform.
4 Begin premixing phase E and once uniform, add to main system.
5 Continue to mix until uniform.
6 Blend phase F into the system.
7 Add compatible preservative, dye(s) and fragrance.
8 Adjust pH of system to 5.0-5.5 with citric acid solution (50% aqueous) as required. System should thicken noticeably with pH
adjustment.
9 Mix gently for at least 15 minutes to reach final consistency.
10 Add phase I and incorporate with gentle mixing.
Properties
Appearance: White, cream
pH: 5.0-5.5
Viscosity*, cps: 30,000-45,000
*Brookfield T-C @ 5.0 rpm, 25°C
E Glycerin 1.60
Xanthan Gum Keltrol CG-T (CP Kelco) 0.40
Cellulose Gum Cekol 30000 (CP Kelco) 0.40
F Canola Oil 20.00
G Preservative, dye, fragrance q.s.
H Citric Acid (50% soln) 3.00
I Carnauba Wax & Chlorophyllin-Copper
Complex
CB Carnauba Green 425-850
(Lonza)
2.50
2-in1 Conditioning Shampoo Featuring
Iselux® SLC AC199
Preparation Procedure
1 Prepare phase A with gentle mixing. Once completely dispersed, add trace amounts of citric acid solution until mixture clears.
2 Add phases B and C while continuing to slowly mix.
3 Slowly blend in phase D and mix until uniform.
4 Begin premixing phase E and once uniform, add to main system.
5 Continue to mix until uniform.
6 Blend phase F into the system.
7 Add compatible preservative, dye(s) and fragrance.
8 Adjust pH of system to 5.0-5.5 with citric acid solution (50% aqueous) as required. System should thicken noticeably with pH
adjustment.
9 Mix gently for at least 15 minutes to reach final consistency.
INCI ingredients Trade name (supplier) % w/w
A Water q.s to 100.00
Guar Hydroxypropyltrimonium Chloride Activsoft C-17 (Innospec) 0.40
Citric Acid (50% soln) Trace
B Trisodium Ethylenediamine Disuccinate Natrlquest E30 (Innospec) 0.50
C Sodium Chloride 3.00
D Water (and) Sodium Lauroyl Methyl
Isethionate (and) Sodium Lauroamphoacetate
(and) Cocamide MIPA (and) Sodium Benzoate
Iselux® SLC (Innospec) 50.00
E Glycerin 2.40
Xanthan Gum Keltrol CG-T (CP Kelco) 0.60
Cellulose Gum Cekol 30000 (CP Kelco) 0.60
F Canola Oil 2.00
Dimethicone, Laureth-4 and Laureth-23 Dow1664 EMULSION (Dow
Corning)
4.00
G Preservative, dye, fragrance q.s.
H Citric Acid (50% soln) 3.00
For further information, please email your region: Americas: [email protected] Europe, Middle East and Africa: [email protected] Asia-Pacific: [email protected] www.innospecinc.com The facts stated and the recommendations made are based on our own research and/or the research of others, and are believed to be accurate. No guarantee of their accuracy is made, however, and unless otherwise expressly provided by law or in written contract, the materials are sold without warranties, expressed or implied, in particular without guarantee as to suitability for particular purpose. Innospec assumes no responsibility for injury or damage to users or third parties. Recipient agrees to assume all risk and liability whether used singly or in combination with other materials. Issue No. 01/2013
Properties
Appearance: White, cream
pH: 5.0-5.5
Viscosity*, cps: 30,000-45,000
*Brookfield T-C @ 5.0 rpm, 25°C