InnovationField Joint Coatingfor

Since the early 1980’s, PipelineInduction Heat has been providingField Joint Coating services to thepipeline construction industry;onshore, offshore and spool baseactivities.

The principles adopted by PipelineInduction Heat are to ensure thehighest possible quality of application,to achieve the long term performanceand integrity of the field joint coatingsystem.

The PIH automated, field joint coating

equipment offers highly repeatable installation processes, capable ofachieving high coating productionrates, allowing for faster comm-issioning and reduced pipelineconstruction costs.

The equipment and processes are designed to minimise any effects tothe environment, whilst assuring thehealth and safety of the operator.

The PIH operatives are highly skilled,following years of in-house trainingand field experience.

Applications

• Open blasting• Closed cycle blasting• Fully automated blast recovery cabinets

Surface Preparation

• Induction heat• Inverters• Gas torch• Infra red• Welding pre heat coils

Pre Heat / Post Heat

• Fusion Bonded Epoxy (FBE)• Heat Shrink Sleeves (HSS)• Polypropylene Fused Field Joint

(Spirally Wound Tape)• Polypropylene and Polyethylene Flame Spray• Multi Component Liquid (MCL)

Corrosion Protection

• Polyurethane Foam Infill (HDPU)• Injection Moulded Polyurethane (IMPU)• Half shells

Pipe Profile Solutions (concrete weight coated pipelines)

• Injection Moulded Polyurethane (IMPU)• Injection Moulded Polypropylene (IMPP)• Fused Insulating Jacket (FIJ) • Polychloroprene• Half shells

Thermal Insulation

• Trench breakers• Coatings applied at site

Other Applications

OnshoreOnshore pipeline construction projects ofteninvolve the installation of large diameter pipesspanning many hundreds of kilometres, acrossvarying terrain and diverse climatic conditions.

The Right of Way (ROW) Environmental Permitsand project scheduling require pipelines to bebuilt and commissioned within strict timelines.

Pipeline Induction Heat works closely with themain contractor providing services for theefficient installation of the field joint coatingsystems during the construction of the pipeline.

Our experienced technicians and projectmanagers are known around the world for theirexpertise in the application of a wide range offield joint coating systems in accordance withthe parameters of the project specificationsand schedule.

FIELD JOINT COATING SYSTEMS INCLUDE:Fusion Bonded Epoxy (FBE), 3 Layer PE and PPSystems, PP Flame Spray, Multi-ComponentLiquid (MCL), Heat Shrink Sleeves (HSS),Fused Insulating Jacket (FIJ).

Spool Base

Offshore pipeline installation can ofteninvolve pre-fabrication of the pipeline atonshore spool base locations.

Pipeline Induction Heat operates at spoolbase sites around the world where theequipment and processes have been adoptedto deliver rapid cycle times and repeatablehigh quality. Continuity of work over manyyears has allowed close working relationshipsto form between Pipeline Induction Heat andSpool Base Operators.

FIELD JOINT COATING SYSTEMS INCLUDE:Fusion Bonded Epoxy (FBE), 3 Layer PE and PPSystems: Flame Spray and Fused Field Joint(FFJ), Heat Shrink Sleeves (HSS), InjectionMoulded PU (IMPU), Injection Moulded PP(IMPP), PU Foam Infill (PUF).

Offshore

Pipeline Induction Heat is a leader in theapplication of field joint coating systems whereincreasing demands for quality, reliability andshorter installation times are paramount.

Our equipment and processes are designed inaccordance with the laybarge configuration,forming an integral part of the offshore pipelay activity, providing a highly repeatableprocess and optimum cycle time for theapplication of a wide range of field jointcoating systems.

FIELD JOINT COATING SYSTEMS INCLUDE:Fusion Bonded Epoxy (FBE), 3 Layer PE andPP Systems: Flame Spray and Fused FieldJoint (FFJ), Heat Shrink Sleeves (HSS),Injection Moulded PU (IMPU), InjectionMoulded PP (IMPP), PU Foam Infill (PUF),Multi Component Liquid (MCL).

Custom Coating

PIH offers services for the application of a widerange of corrosion protection and thermalinsulation systems to special fittings, bends, spoolsand line pipes.

MalaysiaPIH’s dedicated custom coating facility is located atits Malaysia base in Pasir Gudang, incorporating astate of the art blast preparation chamber, pre-heatoven and climate-controlled spray booth.

Specialist ServicesPIH can also mobilise bespoke custom coatingservices at locations around the world; at clientpremises, or at CRC-Evans regional bases.

COATING CAPABILITIES AND EXPERIENCE INCLUDE APPLICATION OF:Fusion Bonded Epoxy (FBE), Injection MouldedPolyurethane (IMPU), Injection MouldedPolypropylene (IMPP), Multi-component liquid(MCL), Polychloroprene (PCP) ...

Injection MouldedPolyurethane

(IMPU)

Injection MouldedPolypropylene

(IMPP)

World Pipeline Locations

• Pipeline Induction Heat, UK • CRC-Evans, US • Canada • Brazil • France

• Norway • The Netherlands • Russia • UAE • India • Malaysia • Australia

Designed by Periscope Studios Ltd • Printed on 100% recycled paper

Certificate No. 25389Certificate No. 532925Certificate No. 560532

For more innovative field joint coatingsolutions visit www.crc-evans.com

Pipeline Induction Heat LtdThe Pipeline Centre, Farrington Road, Rossendale Road Industrial Estate, Burnley, Lancashire, BB11 5SW, United Kingdom.

Tel: +44 (0)1282 415 323 E-mail: sales@pih.co.uk Fax: +44 (0)1282 415 326 Web: www.crc-evans.com

CRC-Evans Pipeline International, Inc.20445 State Hwy. 249, Suite 310, Houston, TX 77070, U.S.A.

Tel: +1 832 249 3100 / E-mail: sales@crc-evans.com+1 800 664 9224 Web: www.crc-evans.com

Fax: +1 832 249 3141