innovation driver - sirem · designed and made in france gear motors and pumps catalog for milk...
TRANSCRIPT
Designed and made in
FRANCE
www.sirem.fr
Gear motors and pumps catalog for milk tanks application
I n n o v a t i o n d r i v e r
Gear motors and pumps for the milk tankMilk storage firstly requires the milk to be cooled homogeneously without impairing its qualities, then it must be maintained at a steady temperature of 3 to 4°C in a milk storage tank.
With over 40 years' experience in this market, SIREM works closely with all the largest worldwide manufacturers of milk coolers.
Our comprehensive range of robust and reliable motors and pumps cater for all tank models.
Whatever the constraints, the volume or shape of the tank or the distinctive agitator blade, SIREM manufactures the solution.
Furthermore, the largest coolers can be fitted with a SIREM pump for cleansing the tank, a critical component to ensure thorough hygiene after each emptying of the tank.
Choose your gear motor
Choose your pump
H PumpPressure > 2 bars
K PumpFlow until 30m3/h
TANK CAPACITY*250 litres 1 000 litres 3 000 litres 6 000 litres 8 000 litres 20 000 litres
F Gear motor
D Gear motor
H Gear motor
L Gear motor
M Gear motor
N Gear motor
P Gear motor
*Depending on the capacity different gear motors can be installed
The integration of SIREM products in the milk tank application
Gear motor for milk stirring
Centrifugal pump for tank cleansingA pump, through a sprinkler, spray the detergent on the inner walls, then the rinsing water.The pump body must be able to withstand high acidity levels and/or corrosive products.
The cooled milk requires the use of one or many low speed motorized agitators. The motorization choice depends on the volume of milk to stir, the shape of the tank and the specs of the agitator blades.
D TYPE - GEAR MOTORFor tank from 1000 to 3000 liters
TECHNICAL FEATURES :
• 2 mountings available : see drawing
• 2 pole motor
• Class B insulation
• IP44 protection
• Single phase with capacitor or three
phase
• Permanently lubricated
• 2 directions of rotation
• Thermal cut-out
• Terminal box : 4 positions
SPECIFICALLY DESIGNED FOR MILK AGITATION
EXCELLENT RESISTANCE TO THE AGITATOR'S SWINGING
OUTPUT SHAFT ACCORDING TO THE SPECIFICATIONS OF YOUR AGITATION BLADE
Technical features
Speed N2
RPM
Reduction ratio
N2/N1
Nominal torque
m.daN
Maximum load on slow shaft (1) Weight
KgRadialdaN
AxialdaN
R1C225DB
21 1/134 1,2 110 60
3,5
25 1/108 0,97 100 54
30 1/96 0,87 95 50
39 1/72 0,66 90 46
48 1/59 0,54 84 42
R3225DB
21 1/134 1,4 110 60
3,5
25 1/108 1,1 100 54
30 1/96 1 95 50
39 1/72 0,76 90 46
48 1/59 0,62 84 42
Motorfeatures
Single phase with capacitor230V - 50Hz
Three phase230/400V
50Hz
Nominal torquecm.N
Output power
W
Speed N1RPM
Currentunder230V
A
IA—IN
Cd—Cn
Cos
1C 225 • 13,4 38 2700 0,47 1,67 1,41 0,99
3 225 • 15,5 44 2700 0,29 2,45 0,97 0,82
(1) Applied in the middle of the shaft end
16
5Sur demandeavec clavette
M6
DIMENSIONS
OPTIONS
• IP55 protection
• Class F insulation
• Output shaft according to your agitator
specifications
• Special voltages and frequencies (60Hz and
50/60Hz)
• Safety circuit breaker (micro-switch incorporated
in the terminal box)
x123
106,40
82,40
72
98
119
4018
165
fifl????? ?????
?fl???
.
02-240
.
.
.
fifl?
Traitement:
Matière:????fl????????????DateIndice
... 1:1F -01708- St Maurice de Beynost
Plan catalogue
REDUCTEUR DModifications
...?????? ????????
?fl?????????
Dossier??????
Date:
?????27/09/02Date:
M.Décollonge
01. A2-ND-2227-1-
01 12/09/07 ??fl?? ???fl? 07-097Mis à jour plan pour catalogue
Sur demandeavec clavette
M6
FIXATION "2" par 4 trous M6à 90° sur Ø94 centrage sur ØN
FIXATION "1"avec patte
122
98,5
0
75x86
78
120
b
a
c d
Position de laBOITE A BORNES
(normale)
4 trous oblongs 8x19.
117
184
60
14
3,50
25
55
14
68,75
80N=
135
3
117,60
120
12278
75 x 86
98
106,40
82,40
72
98 x 123
119
FIXATION "2" par4 trous M6 à 90°
sur Ø94 centrage sur ØN FIXATION "1"avec patte
14
14
3,50
25 68,7
3
60
135
186
55 N =80
117
4018
122
4 trous Oblongs Ø8x19.
b
a
c d
Position de laBOITE A BORNES
(normale)
M6
Sur demandeavec clavette
16
5 02 16/10/15 Passage en capot plastique 15041
01 12/09/07 F. Bouras E. Putoud Mis à jour plan pour catalogue 07097
00 27/09/02 M. Decollonge Création 07097
Indice Date Dessinateur Responsable Modifications Dossier
Tol.géné.: iso 2768 mK
Vérifié :
02
Matière:
Traitement:
Dossier:
Ra général: µ
.
.
.
Réducteurs DPlan catalogue
1:115041
... .Code Article:
Echelle:F -01708- St Maurice de Beynost
.
588196.28mm³Volume:
Dessiné:
N°A2-ND-2227-1-
M.DécollongeDate: 27/09/02
E.PutoudDate: 31-05-16Remplace: ...
D TYPE - GEAR MOTORFor tank from 1000 to 3000 liters
4 oblong holes08x19
MOUNTING ʺ2ʺ with 4 holes M6 at 90°
on Ø94 adjusting on ØN MOUNTING ʺ1ʺ with lug
Shaft with keyway on demand
Terminal box positions
(normal)
Juin 2016 - SIREM - Product sheet_MilkTank_Gearmotor_D_EN_2016_rev1.0Photo and data are non-contractual
SMALL AND COMPACT
OUTPUT SHAFT ACCORDING TO THE SPECIFICATIONS OF YOUR AGITATION BLADE
F TYPE - GEAR MOTORFor tank from 250 to 1000 liters
TECHNICAL FEATURES :
• 4 mountings available : see drawing
• 2 pole motor
• Class B insulation
• IP44 protection
• Single phase with capacitor
• Permanently lubricated
• 2 directions of rotation
• Thermal cut-out
• Terminal box 4 positions
Technical features
Speed N2
RPM
Reduction ratio
N2/N1
Nominal torque
m.daN
Maximal load on slowshaft (1) Weight
KgRadialdaN
AxialdaN
R1C225FB
21 1/127 1,14 77 49
2,730 1/90 0,81 69 40
40 1/69 0,62 64 36
48 1/57 0,51 61 33
Motor features
Single phase with capacitor230V - 50Hz
Three phase230/400V
50Hz
Nominal torquecm.N
Output power
W
Speed N1RPM
Current under 230V
A
IA—IN
Cd—Cn
Cos
1C 225 • 13,4 38 2700 0,47 1,67 1,41 0,99
(1) Applied in the middle of the shaft end
DIMENSIONS
OPTIONS
• IP55 protection
• Class F insulation
• Output shaft according to your agitator
specifications
• Special voltages and frequencies (60Hz
and 50/60Hz)
• Three phase motor
• Safety circuit breaker (micro-switch
incorporated in the terminal box)
4017,50
x123
98,5
0 119
71
17,5
0
79,5
0
82,40
98
106,40
4 trous oblongs8x19
3,50
108
25
120
14
6
117,60
60
14
156,50
Sur demandeavec clavette
M6
BOITE A BORNES
c
a
b
d
Position de la
(normale)
16
5
FIXATION "4" par 4 M6 à 90° sur Ø108,5
à 90° sur Ø110
FIXATION "1"avec patte
FIXATION "6" par 4 trous Ø7
FIXATION "2" par 3 M6
4747
47
75x86
122
01
A2-ND-2229-1-...
13/09/07 fifl
fiflDate:
????????
.
fl??? 07-097
02-240
.
??fl????????flflfl
?????
Traitement:
?????????????DateIndice
... 1:1F -01708- St Maurice de Beynost.
.
??????
Matière:
Plan catalogueREDUCTEUR F
Modifications
????????
???????????
Dossier??????
30/09/02Date:
M.Décollonge
01...
???????
Mise à jour plan pour catalogue
4017,50
x123
98,5
0 119
71
17,5
0
79,5
0
82,40
98
106,40
4 trous oblongs8x19
3,50
108
25
120
14
6
117,60
60
14
156,50
Sur demandeavec clavette
M6
BOITE A BORNES
c
a
b
d
Position de la
(normale)
16
5
FIXATION "4" par 4 M6 à 90° sur Ø108,5
à 90° sur Ø110
FIXATION "1"avec patte
FIXATION "6" par 4 trous Ø7
FIXATION "2" par 3 M6
4747
47
75x86
122
01
A2-ND-2229-1-...
13/09/07 fifl
fiflDate:
????????
.
fl??? 07-097
02-240
.
??fl????????flflfl
?????
Traitement:
?????????????DateIndice
... 1:1F -01708- St Maurice de Beynost.
.
??????
Matière:
Plan catalogueREDUCTEUR F
Modifications
????????
???????????
Dossier??????
30/09/02Date:
M.Décollonge
01...
???????
Mise à jour plan pour catalogue
108
120
60
25 6
14
3,50
14
158
122
4017,50 4 trous oblongsØ8 x 19
47 47
47
122
75 x 86
71
17,5
0
79,5
0
82,40
106,40
98 x 123
119
98
FIXATION "1"avec patte
FIXATION "4"par 4 M6 à 90°
sur Ø108,5
FIXATION "6"par 4 trous Ø7à 90° sur Ø110
FIXATION "2"par 3 M6
a
b
c d
Position de laBOITE A BORNES
(normale)
M6
Sur demandeavec clavette
16
502 16/10/15 F. Bouras Passage en capot plastique 15041
01 13/09/07 F. Bouras E. Putoud Mise à jour plan pour catalogue 07097
00 30/09/02 M. Decollonge Création 07097
Indice Date Dessinateur Responsable Modifications Dossier
Tol.géné.: iso 2768 mK
Vérifié :
02
Matière:
Traitement:
Dossier:
Ra général: µ
.
.
.
Réducteurs FPlan catalogue
1:115041
... ...Code Article:
Echelle:F -01708- St Maurice de Beynost
.
470099.30mm³Volume:
Dessiné:
N°A2-ND-2229-1-
M.DécollongeDate: 30/09/02
E.PutoudDate: 31-05-16Remplace: ...
For tank from 250 to 1000 litersF TYPE - GEAR MOTOR
Shaft with keyway on demand
Terminal box positions
(normal)
MOUNTING ʺ6ʺ with 4 holes Ø7 at 90° on Ø110
MOUNTING ʺ2ʺ with 3 holes M6
MOUNTING ʺ4ʺ with 4 holes M6
at 90° on Ø108,5
MOUNTING ʺ1ʺ with lug
4 oblong holes08x19
Juin 2016 - SIREM - Product sheet_MilkTank_Gearmotor_F_EN_2016_rev1.0Photo and data are non-contractual
H TYPE - GEAR MOTORFor tank from 1000 to 3000 liters
SMALL AND COMPACT
CENTERED OUTPUT SHAFT
OUTPUT SHAFT ACCORDING TO THE SPECIFICATIONS OF YOUR AGITATION BLADE
TECHNICAL FEATURES :
• 2 mountings available : see drawing
• 2 pole motor
• Class B insulation
• IP44 protection
• Single phase with capacitor or three
phase
• Permanently lubricated
• 2 directions of rotation
• Thermal cut-out
• Terminal box : 4 positions
Technical features
SpeedN2
RPM
Reduction ratio
N2/N1
Nominal torque
m.daN
Maximal load on slowshaft (1) Weight
KgRadialdaN
AxialdaN
R1C225HB
21 1/134 1,2 74 60
3,030 1/96 0,87 64 50
39 1/72 0,66 60 46
48 1/59 0,54 56 42
R3225HB
21 1/134 1,4 74 60
3,030 1/96 1 64 50
39 1/72 0,76 60 46
48 1/59 0,62 56 42
Motor features
Single phase with capacitor230V - 50Hz
Three phase230/400V
50Hz
Nominal torquecm.N
Output power
W
Speed N1RPM
Current under230 V
A
IA—IN
Cd—Cn
Cos
1C 225 • 13,4 38 2700 0,47 1,67 1,41 0,99
3 225 • 15,5 44 2700 0,29 2,45 0,97 0,82
(1) Applied in the middle of the shaft end
DIMENSIONS
OPTIONS
82,40
106,40
72
7898
,50
98x123
119
4018 FIXATION "1"avec patte
FIXATION "2" par 4 trous M6à 90° sur Ø94 - centrage sur ØN
122
75x86
120
b (normale)
dc
a
Position de laBOITE A BORNES
Sur demandeavec clavette
M6
M.Décollonge
fifl
Date:
07-097
??fl???????flflfl
02-240
.
???????
?fl???
.?????
.
fifl?
Traitement:
?????????????
.
Date
...
REDUCTEUR H
Indice
Plan catalogueF -01708- St Maurice de Beynost
ModificationsMatière:
????????
??????????
...??????
Dossier
01
??????
30/09/02Date:
1:1 ... A2-ND-2230-1-
01 13/09/07
???????
Mise à jour plan pour catalogue
16
5
4 trous oblongs8x19.
3,50
25
55
14
117
135
14
3
80
117,60
27
N=
60
184
82,40
106,40
72
7898
,50
98x123
119
4018 FIXATION "1"avec patte
FIXATION "2" par 4 trous M6à 90° sur Ø94 - centrage sur ØN
122
75x86
120
b (normale)
dc
a
Position de laBOITE A BORNES
Sur demandeavec clavette
M6
M.Décollonge
fifl
Date:
07-097
??fl???????flflfl
02-240
.
???????
?fl???
.?????
.
fifl?
Traitement:
?????????????
.
Date
...
REDUCTEUR H
Indice
Plan catalogueF -01708- St Maurice de Beynost
ModificationsMatière:
????????
??????????
...??????
Dossier
01
??????
30/09/02Date:
1:1 ... A2-ND-2230-1-
01 13/09/07
???????
Mise à jour plan pour catalogue
16
5
4 trous oblongs8x19.
3,50
25
55
14
117
135
14
3
80
117,60
27
N=
60
184
• IP55 protection
• Class F insulation
• Output shaft according to your agitator
specifications
• Special voltages and frequencies (60Hz and
50/60Hz)
• Safety circuit breaker (micro-switch
incorporated in the terminal box)
136
3
2725
N=80
55
60
117
186
122
14
3,50
14
40184 trous oblongsØ8 x 19
122
75 x 86
120
9878
82,40
106,40
119
98 x 123
72
FIXATION "1"avec patte
FIXATION "2"par 4 trous M6à 90° sur Ø94
centrage sur ØN
M6
Sur demandeavec clavette
16
5dc
b
a
(normale)
Position de laBOITE A BORNES
02 19/10/15 F. Bouras Passage en capot plastique 15041
01 13/09/07 F; Bouras Mise à jour plan pour catalogue 07097
00 30/09/02 M. Decollonge Création 07097
Indice Date Dessinateur Responsable Modifications Dossier
Tol.géné.: iso 2768 mK
Vérifié :
02
Matière:
Traitement:
Dossier:
Ra général: µ
.
.
.
Réducteurs HPlan catalogue
1:115041
... ...Code Article:
Echelle:F -01708- St Maurice de Beynost
.
667745.91mm³Volume:
Dessiné:
N°A2-ND-2230-1-
M.DécollongeDate: 30/09/02
E.PutoudDate: 31-05-16Remplace: ...
H TYPE - GEAR MOTORFor tank from 1000 to 3000 liters
MOUNTING ʺ1ʺ with lug4 oblong holes
08x19
MOUNTING ʺ2ʺ with 4 holes M6
at 90° on Ø94 adjusting on ØN
Shaft with keyway on demand
Terminal box positions
(normal)
Juin 2016 - SIREM - Product sheet_MilkTank_Gearmotor_H_EN_2016_rev1.0Photo and data are non-contractual
L TYPE - GEAR MOTORFor tank from 3000 to 6000 liters
SMALL AND COMPACT, EASE MOUNTING
REINFORCED VERSION IN OPTION FOR MORE TORQUE
OUTPUT SHAFT ACCORDING TO THE SPECIFICATIONS OF YOUR AGITATION BLADE
TECHNICAL FEATURES :
• 3 mountings available including an
off-center flange : see drawing
• 2 pole motor
• Class B insulation
• IP44 protection
• Single phase with capacitor or three
phase
• Permanently lubricated
• 2 direction of rotation
• Thermal cut-out
• Terminal box : 4 positions
Technical features
Speed N2
RPM
Reduction ratio
N2/N1
Nominal torque
m.daN
Maximal load on slowshaft (1) Weight
KgRadialdaN
AxialdaN
R1C 245 LBR3 245 LB (three phase version)
21 1/125 2,5 94 60
3,525 1/112 2,2 89 56
32 1/88 1,7 82 50
48 1/59 1,2 72 42
R1C 245 LBR*R3 245 LBR (three phase version)*
21 1/125 5,2 94 60
3,525 1/112 4,6 89 56
32 1/88 3,6 82 50
48 1/59 2,4 72 42
Motor featuresSingle phase with capacitor230V - 50Hz
Three phase230/400V
50Hz
Nominal torquecm.N
Output power
W
Speed N1RPM
Current under230 V
A
IA—IN
Cd—Cn
Cos
1C 245 • 24,2 71 2800 0,59 2,3 0,8 0,99
1C 245 R • 51,2 145 2700 1,08 1,65 0,49 0,98
3 245 • 24,8 73 2800 0,42 3,25 0,97 0,79
3 245 R • 51,2 145 2700 0,77 2,9 0,89 0,83
* reinforced version(1) Applied at 21mm from the shaft end
DIMENSIONS
OPTIONS
• IP55 protection
• Class F insulation
• Output shaft according to your agitator
specifications
• Special voltages and frequencies (60Hz and
50/60Hz)
• Reinforced motor (first gear in metal) for more
torque
L TYPE - GEAR MOTORFor tank from 3000 to 6000 liters
MOUNTING ʺ5ʺ
3 lights at 90°
4 oblongs holes 8x19
MOUNTING ʺ7ʺ with 3 holes M6 at 120° on Ø70
MOUNTING ʺ1ʺ with lug
Shaft with keyway on demand
Terminal box positionsLug positions
(normal)
(normal)
Juin 2016 - SIREM - Product sheet_MilkTank_Gearmotor_L_EN_2016_rev1.0Photo and data are non-contractual
M TYPE - GEAR MOTORFor tank from 3000 to 6000 liters
SMALL AND COMPACT
REINFORCED VERSION IN OPTION FOR MORE TORQUE
OUTPUT SHAFT ACCORDING TO THE SPECIFICATIONS OF YOUR AGITATION BLADE
TECHNICAL FEATURES :
• 4 mountings available : see drawing
• 2 pole motor
• Class B insulation
• IP44 protection
• Single phase with capacitor or three
phase
• Permanently lubricated
• 2 direction of rotation
• Thermal cut-out
• Terminal box : 4 positions
Technical features
Speed N2
RPM
Reduction ratio
N2/N1
Nominal torque
m.daN
Maximal load on slowshaft (1) Weight
KgRadialdaN
AxialdaN
R1C 245 MBR3 245 MB (three phase versions)
21 1/125 2,5 102 60
3,525 1/112 2,2 96 56
32 1/88 1,7 88 50
48 1/59 1,2 78 42
R1C 245 MBR*R3 245 MBR (three phase versions)*
21 1/125 5,2 102 60
3,525 1/112 4,6 96 56
32 1/88 3,6 88 50
48 1/59 2,4 78 42
Motor featuresSingle phase with capacitor230V - 50Hz
Three phase230/400V
50Hz
Nominal torquecm.N
Output power
W
Speed N1RPM
Current under 230 V
A
IA—IN
Cd—Cn
Cos
1C 245 • 24,2 71 2800 0,59 2,3 0,8 0,99
1C 245 R • 51,2 145 2700 1,08 1,65 0,49 0,98
3 245 • 24,8 73 2800 0,42 3,25 0,97 0,79
3 245 R • 51,2 145 2700 0,77 2,9 0,89 0,83
* reinforced version(1) Applied at 21mm from the shaft end
DIMENSIONS
OPTIONS
M TYPE - GEAR MOTORFor tank from 3000 to 6000 liters
• IP55 protection
• Class F insulation
• Output shaft according to your agitator
specifications
• Special voltages and frequencies (60Hz and
50/60Hz)
• Reinforced motor (first gear in metal) for more
torque
Shaft with keyway on demand
Terminal box positionsLug positions
(normal)
(normal)
Juin 2016 - SIREM - Product sheet_MilkTank_Gearmotor_M_EN_2016_rev1.0
MOUNTING ʺ1ʺ with lug
4 oblong holes08x19
MOUNTING ʺ4ʺ with 4 holes M6 at 90° on Ø108,5
MOUNTING ʺ6ʺ with 4 holes Ø7 at 90° on Ø110
MOUNTING ʺ2ʺ with 3 holes M6
Photo and data are non-contractual
N TYPE - GEAR MOTORFor tank from 3000 to 8000 liters
SMALL AND COMPACT, EASE MOUNTING
REINFORCED VERSION IN OPTION FOR MORE TORQUE
OUTPUT SHAFT ACCORDING TO THE SPECIFICATIONS OF YOUR AGITATION BLADE
TECHNICAL FEATURES :
• 2 mountings available : see drawing
• Solid or hollow shaft
• 2 pole motor
• Class B insulation
• IP44 protection
• Single phase with capacitor or three
phase
• Permanently lubricated
• 2 directions of rotation
• Thermal cut-out
Technical features
Speed N2
RPM
Reduction ratio
N2/N1
Nominal torque
m.daN
Maximal load on slowshaft (1) Weight
KgRadialdaN
AxialdaN
R1C 245 NBR3 245 NB (three phase version)
21 1/126 2,5 160 102
6,525 1/112 2,2 150 93
32 1/89 1,7 138 82
48 1/59 1,2 122 69
R1C 245 NBR*R3 245 NBR (Three phase version)*
21 1/126 5,2 160 102
6,525 1/112 4,6 150 93
32 1/89 3,6 138 82
48 1/59 2,4 122 69
Motor featuresSingle phase with capacitor230V - 50Hz
Three phase230/400V
50Hz
Nominal torquecm.N
Output power
W
Speed N1RPM
Current under230 V
A
IA—IN
Cd—Cn
Cos
1C 245 • 24,2 71 2800 0,59 2,3 0,8 0,99
1C 245 R • 51,2 145 2700 1,08 1,65 0,49 0,98
3 245 • 24,8 73 2800 0,42 3,25 0,97 0,79
3 245 R • 51,2 145 2700 0,77 2,9 0,89 0,83
* reinforced version(1) Applied at 21mm from the shaft end
DIMENSIONS
OPTIONS
• IP55 protection
• Class F insulation
• Output shaft according to your agitator specifications
• Special voltages and frequencies (60Hz and 50/60Hz)
• Washing system
• Reinforced motor (first gear in metal) for more torque
N TYPE - GEAR MOTORFor tank from 3000 to 8000 liters
119
131
80
109
10
28
3,50
35
114
L
24 ( Ø maxi = 28mm )
122
42,50
crans d'entrainement(2 ou 4 suivant vitesse)
FIXATION N2
103,50119
75
x 86
261,50
98 x
123
282
72,50
4 trous M6à 90° sur Ø94
119
10
131
35
L
130
20
16
12
44
105
24 ( Ø maxi = 28mm )
122
42,50
crans d'entrainement(2 ou 4 suivant vitesse)
FIXATION N5
103,50119
261,50
75
x 86
98 x
123
282
72,50
45°
4 trous Ø9à 90° sur Ø115
12 Indice Date Dessinateur Responsable Modifications Dossier
01 04/07/16 E. Putoud Passage en capot plastique 15041
00 24/09/12 M. Décollonge Création 02240
Tol.géné.: iso 2768 mK
Vérifié :
01
Matière:
Traitement:
Dossier:
Ra général: µ
.
.
.
Réducteurs NPlan catalogue version Tank à lait
1:115041
... Code Article:
Echelle:F -01708- St Maurice de Beynost
.
979875.70mm³Volume:
Dessiné:
N°A1-ND-2231-1-Remplace:
M.DécollongeDate: 24/09/02
E.PutoudDate: 08-07-16
119
131
80
109
10
28
3,50
35
114
L
24 ( Ø maxi = 28mm )
122
42,50
crans d'entrainement(2 ou 4 suivant vitesse)
FIXATION N2
103,50119
75
x 86
261,50
98 x
123
282
72,50
4 trous M6à 90° sur Ø94
119
10
131
35
L
130
20
16
12
44
105
24 ( Ø maxi = 28mm )
122
42,50
crans d'entrainement(2 ou 4 suivant vitesse)
FIXATION N5
103,50119
261,50
75
x 86
98 x
123
282
72,50
45°
4 trous Ø9à 90° sur Ø115
12 Indice Date Dessinateur Responsable Modifications Dossier
01 04/07/16 E. Putoud Passage en capot plastique 15041
00 24/09/12 M. Décollonge Création 02240
Tol.géné.: iso 2768 mK
Vérifié :
01
Matière:
Traitement:
Dossier:
Ra général: µ
.
.
.
Réducteurs NPlan catalogue version Tank à lait
1:115041
... Code Article:
Echelle:F -01708- St Maurice de Beynost
.
979875.70mm³Volume:
Dessiné:
N°A1-ND-2231-1-Remplace:
M.DécollongeDate: 24/09/02
E.PutoudDate: 08-07-16
4 holes Ø9 at 90° on Ø115
4 holes M6 at 90° on Ø94
driving catches (2 or 4 depending on speed)
LenghtL
Iron height
driving catches (2 or 4 depending on speed)
MOUNTING N5MOUNTING N2
Juin 2016 - SIREM - Product sheet_MilkTank_Gearmotor_N_EN_2016_rev1.0Photo and data are non-contractual
P TYPE - GEAR MOTORFor tank from 8000 to 20 000 liters
SMALL AND COMPACT, EASE MOUNTING
EXCELLENT RESISTANCE TO THE AGITATORS'S SWINGING
OUTPUT SHAFT ACCORDING TO THE SPECIFICATIONS OF YOUR AGITATION BLADE
TECHNICAL FEATURES :
• 2 mountings available : see drawing
• Solid or hollow shaft
• 2 pole motor
• Class F insulation
• IP44 protection
• Single phase with capacitor or three
phase
• Permanently lubricated
• 2 directions of rotation
• Thermal cut-out
Technical features
Speed N2
RPM
Reduction ratio
N2/N1
Nominal torque
m.daN (2)
Maximal load on slowshaft (1) Weight
KgRadialdaN
AxialdaN
R1C 250 PBR3 250 PB (version triphasée)
23 1/120 8,5 175 9510
32 1/86 6,2 160 82
Motor featuresSingle phase with capacitor230V - 50Hz
Three phase230/400V
50Hz
Nominal torquecm.N
Output power
W
Speed N1RPM
Current under 230 V
A
IA—IN
Cd—Cn
Cos
1C 250 •76 220 2750
1,67 1,84 0,67 0,85
3 250 • 0,90 4,2 2,5 0,86
(1) Applied at 21mm from the shaft end(2) Maximal torque not to exceed
DIMENSIONS
OPTIONS
• IP55 protection
• Output shaft according to your agitator specifications
• Special voltages and frequencies (60Hz and 50/60Hz)
• Weshing system
P TYPE - GEAR MOTORFor tank from 8000 to 20 000 liters
27,30
46,4
131
300,9
27,30
46,4
131
301
80
45°
12
Date: 30/09/02
M.Décollonge
E.Putoud
Tol.géné.: iso 2768 mK
Vérifié :
01
Matière:
Traitement:
Dossier:
.
Réducteurs PPlan catalogue Tank à lait
3:415041
...Ra général: µ
F -01708- St Maurice de Beynost
Code Article:
Echelle:1532164.31mm³Volume:
N°A1-ND-2232-1-Remplace:
Dessiné:
Date: 05-07-16
2 crans d'entrainement
FIXATION P2
-0,1
24
1
14
82
8
109
33
14
1
0,2
15
8
3,5
0
80 -
10
4 trous M6à 90° sur Ø94
112
280
124
FIXATION P5
2 crans d'entrainement
44
33
14
8
12
10
24
1
15
7
15
81
620
105
4 trous Ø9à 90° sur Ø115
280
112 134
Indice Date Dessinateur Responsable Modifications Dossier
01 04/07/16 E. Putoud Supprimé bride fixation ''P9'' + mises à jour multiples. 15041
00 30/09/02 M. Décollonge Création 02240
Juin 2016 - SIREM - Product sheet_MilkTank_Gearmotor_P_EN_2016_rev1.0
4 holes M6 at 90° on Ø94
4 holes Ø9 at 90° on Ø115
2 driving catches2 driving catches
MOUNTING N5 MOUNTING N2
Photo and data are non-contractual
K TYPE - CENTRIFUGAL PUMPFlow until 30m3
HIGH FLOW PUMP UNTIL 30M3
SINGLE OR THREE PHASE VERSION
TECHNICAL FEATURES :
• Polypropylène pump housing
• Capacitor inside the terminal box
• Nitril mechanical seal
• 8 outlet positions
• Terminal box : 5 positions
• Polyamide 6 impeller
• 3 drain plug positions
• Class F insulation
• Single or three phase motor
COMPLY WITH STANDARDS :
• These pumps meet the standards
and guidelines in force
• EN 60335-1
• EN 60335-2-41
ModelSingle phase with
capacitor230V - 50Hz
Three phase230/400V
50Hz
Inlet powerW
Output powerW
Current 230V - A
Cos φ
PB 1C250 K4B • 560 400 2,50 0,98
PB 3250 K4B • 560 400 1,85 0,75
PB 1C270 K4B • 900 600 3,95 0,98
PB 3270 K4B • 875 600 2,95 0,74
PB 1C285 K4B • 1150 810 5,10 0,98
PB 3285 K4B • 985 800 3,40 0,73
PB 1C80 K1B • 1350 1100 6,10 0,96
PB 80 K1B • 1360 1100 4,20 0,81
Mètres
Débit (m³/h)
Mètres
Débit (m³/h)
1 PB 1C 250 KBPB 3 250 KB Impeller Ø 88
2PB 1C 270 KBPB 3 270 KB
Impeller Ø 107
3 Impeller Ø 100
4 Impeller Ø 93
5PB 1C 285 KBPB 3 285 KB
Impeller Ø 107
6 Impeller Ø 100
7 PB 1C 80 KBPB 3 80 KB Impeller Ø 107
Meters
Flow (m3/h) Flow (m3/h)
Meters
B
177
16utile
(2)
176
A
61
115
20,5
90
int. 1
8,6
25,4
Refoulement(1) ou (2)
Fixation "1" par 4 trous Ø9x13
PE11M
86 x 75 54
40
L
123 x 96
71C 147
int.3
0,3
136
80,
5
Aspiration(3)
Fixation "4" par 4 trous Ø9x11
Position de la boîte à bornes par rapport à la patte de fixation
b
c d
cb bd
( normale )
Position du refoulementpar rapport à la patte de fixation
6
8
2
4
1
3
5
7
Indice Date Dessinateur Responsable Modifications Dossier
01 17/06/16 E. Putoud Mis à jour pour capot de ventilation en tôle → plastique 15041
00 30/09/02 M. Décollonge Création 02240
Tol.géné.: iso 2768 mK
Vérifié :
01
Matière:
Traitement:
Dossier:
Ra général: µ
.
.
.
Electropompe H Type "PB"Plan catalogue
1:1... ...Code Article:
Echelle:F -01708- St Maurice de Beynost
.
965158.23mm³Volume:
Dessiné:
N°A1-ND-2235-1-Remplace: ...
M.DécollongeDate: 30/09/02
E.PutoudDate: 12-07-16
B
177
16utile
(2)
176
A
61
115
20,5
90
int. 1
8,6
25,4
Refoulement(1) ou (2)
Fixation "1" par 4 trous Ø9x13
PE11M
86 x 75 54
40
L
123 x 96
71
C 147
int.3
0,3
136
80,
5
Aspiration(3)
Fixation "4" par 4 trous Ø9x11
Position de la boîte à bornes par rapport à la patte de fixation
b
c d
cb bd
( normale )
Position du refoulementpar rapport à la patte de fixation
6
8
2
4
1
3
5
7
Indice Date Dessinateur Responsable Modifications Dossier
01 17/06/16 E. Putoud Mis à jour pour capot de ventilation en tôle → plastique 15041
00 30/09/02 M. Décollonge Création 02240
Tol.géné.: iso 2768 mK
Vérifié :
01
Matière:
Traitement:
Dossier:
Ra général: µ
.
.
.
Electropompe H Type "PB"Plan catalogue
1:1... ...Code Article:
Echelle:F -01708- St Maurice de Beynost
.
965158.23mm³Volume:
Dessiné:
N°A1-ND-2235-1-Remplace: ...
M.DécollongeDate: 30/09/02
E.PutoudDate: 12-07-16
DIMENSIONS
OPTIONS
• Special voltages and frequencies
(60Hz and 50/60Hz)
• IP55 protection
K TYPE - CENTRIFUGAL PUMPFlow until 30m3
Outlet position in relation to the lug
Position of the terminal box in relation to the lug
normal
Juin 2016 - SIREM - Product sheet_MilkTank_Pump_K_EN_2016_rev1.0Photo and data are non-contractual
B
H2
176
20,5
A
20,5
9060
37
120
(1) ou(2) ou(3)
Fixation "1" par:4 trous Ø9x13
PE11M
86 x 7557,5
55
50
L
123 x 96
H1
C D
int.4
4
80,5
149
(5)
Fixation "4" par 4 trous Ø9x11
Position de la boîte à bornes par rapport à la patte de fixation
b
c d
cb bd
( normale )
Position du refoulementpar rapport à la patte de fixation
6
8
2
4
1
3
5
7
120
18,314
60
7
(4)
Sortie G2"1/4en position "8"
Indice Date Dessinateur Responsable Modifications Dossier
02 12/07/16 E. Putoud Mise à jour pour capot de ventilation en tôle → plastique 15041
01 01/03/05 Y. Petit Ajout de la variante de refoulement G 2''1/4 05008
00 30/09/02 M. Décollonge Création 02240
Tol.géné.: iso 2768 mK
Vérifié :
02
Matière:
Traitement:
Dossier:
Ra général: µ
.
.
.
Electropompe K type "PB"Plan catalogue
1:115041
... Code Article:
Echelle:F -01708- St Maurice de Beynost
.
1003273.86mm³Volume:
Dessiné:
N°A1-ND-2234-1-Remplace: ...
M.DécollongeDate: 30/09/02
E.PutoudDate: 12-07-16
Mounting "1" with 4 holes Ø9x13
(1) or (2) or (3)
Discharge G2"1/4 in "8" position
Dimensions (mm)
L A B C D H1 H2
Pumps
PB 1C250PB 3250 278 108 130 32 160,5 71 177,5
PB 1C270PB 3270 288 108 130 52 160,5 71 177,5
PB 1C285PB 3285 301 108 130 67 160,5 71 177,5
PB 1C80PB 80 323 125 147 100 155,5 80 186,5
Mounting "4" with 4 holes Ø9x11
Ø Discharge : (1) - Ribed Ø ext. 37 - Ø int. 29,3 connection on smooth pipe(2) - On request : Threaded Ø ext. G1"¼ male - Ø int. 33(3) - On request : Threaded Ø ext. G1"½ male - Ø int. 37(4) - On request : Threaded Ø ext. G2"¼ male - Ø int. 50
Ø Suction : (5) - On request : Threaded Ø int. G1ʺ½female
H TYPE - CENTRIFUGAL PUMPPressure until 2 bars
HIGH PRESSURE PUMP UNTIL 2 BARS
SINGLE OR THREE PHASE VERSION
TECHNICAL FEATURES :
• Polypropylène pump housing
• Capacitor inside the terminal box
• Nitril mechanical seal
• 8 outlet positions
• Terminal box : 5 positions
• Polyamide 6 impeller
• 3 drain plug positions
• Class F insulation
• Single or three phase motor
COMPLY WITH STANDARDS :
• These pumps meet the standards
and guidelines in force
• EN 60335-1
• EN 60335-2-41
Model CurvesSingle phase with capacitor230V - 50Hz
Three phase230/400V
50Hz
Inlet powerW
Output powerW
Current 230V - A
Cos φ Ø Impellermm
PB 1C250 H4B1
• 560 400 2,50 0,98
120
PB 3250 H4B • 560 400 1,85 0,75
PB 1C270 H4B2
• 900 600 3,95 0,98
PB 3270 H4B • 875 600 2,95 0,74
PB 1C285 H4B3
• 1150 810 5,10 0,98
PB 3285 K4B • 985 800 3,40 0,73
Meters
Flow (m3/h)
B
177
16utile
(2)
176
A
61
115
20,5
90
int. 1
8,6
25,4
Refoulement(1) ou (2)
Fixation "1" par 4 trous Ø9x13
PE11M
86 x 75 54
40
L
123 x 96
71
C 147
int.3
0,3
136
80,
5
Aspiration(3)
Fixation "4" par 4 trous Ø9x11
Position de la boîte à bornes par rapport à la patte de fixation
b
c d
cb bd
( normale )
Position du refoulementpar rapport à la patte de fixation
6
8
2
4
1
3
5
7
Indice Date Dessinateur Responsable Modifications Dossier
01 17/06/16 E. Putoud Mis à jour pour capot de ventilation en tôle → plastique 15041
00 30/09/02 M. Décollonge Création 02240
Tol.géné.: iso 2768 mK
Vérifié :
01
Matière:
Traitement:
Dossier:
Ra général: µ
.
.
.
Electropompe H Type "PB"Plan catalogue
1:1... ...Code Article:
Echelle:F -01708- St Maurice de Beynost
.
965158.23mm³Volume:
Dessiné:
N°A1-ND-2235-1-Remplace: ...
M.DécollongeDate: 30/09/02
E.PutoudDate: 12-07-16
B
177
16utile
(2)
176
A
61
115
20,5
90
int. 1
8,6
25,4
Refoulement(1) ou (2)
Fixation "1" par 4 trous Ø9x13
PE11M
86 x 75 54
40
L
123 x 96
71
C 147
int.3
0,3
136
80,
5
Aspiration(3)
Fixation "4" par 4 trous Ø9x11
Position de la boîte à bornes par rapport à la patte de fixation
b
c d
cb bd
( normale )
Position du refoulementpar rapport à la patte de fixation
6
8
2
4
1
3
5
7
Indice Date Dessinateur Responsable Modifications Dossier
01 17/06/16 E. Putoud Mis à jour pour capot de ventilation en tôle → plastique 15041
00 30/09/02 M. Décollonge Création 02240
Tol.géné.: iso 2768 mK
Vérifié :
01
Matière:
Traitement:
Dossier:
Ra général: µ
.
.
.
Electropompe H Type "PB"Plan catalogue
1:1... ...Code Article:
Echelle:F -01708- St Maurice de Beynost
.
965158.23mm³Volume:
Dessiné:
N°A1-ND-2235-1-Remplace: ...
M.DécollongeDate: 30/09/02
E.PutoudDate: 12-07-16
DIMENSIONS
OPTIONS
Dimensions (mm)
L A B C
Pumps
PB 1C250PB 3250 255 108 130 32
PB 1C270PB 3270 275 108 130 52
PB 1C285PB 3285 290 108 130 67
Ø Discharge : (1) - Connection on smooth pipe(2) - On request : Threaded Ø ext. G¾ʺ male
Ø Suction : (3) - On request : Threaded Ø int. G1ʺ female
• Special voltages and frequencies
(60Hz and 50/60Hz)
• IP55 protection
Outlet position in relation to the lug Position of the terminal box in relation to the lug
normal
H TYPE - CENTRIFUGAL PUMPPressure until 2 bars
Juin 2016 - SIREM - Product sheet_MilkTank_Pump_H_EN_2016_rev1.0Photo and data are non-contractual
B
177
16utile
(2)
176
A
61
115
20,5
90
int. 1
8,6
25,4
Refoulement(1) ou (2)
Fixation "1" par 4 trous Ø9x13
PE11M
86 x 75 54
40
L
123 x 96
71
C 147
int.3
0,3
136
80,
5
Aspiration(3)
Fixation "4" par 4 trous Ø9x11
Position de la boîte à bornes par rapport à la patte de fixation
b
c d
cb bd
( normale )
Position du refoulementpar rapport à la patte de fixation
6
8
2
4
1
3
5
7
Indice Date Dessinateur Responsable Modifications Dossier
01 17/06/16 E. Putoud Mis à jour pour capot de ventilation en tôle → plastique 15041
00 30/09/02 M. Décollonge Création 02240
Tol.géné.: iso 2768 mK
Vérifié :
01
Matière:
Traitement:
Dossier:
Ra général: µ
.
.
.
Electropompe H Type "PB"Plan catalogue
1:1... ...Code Article:
Echelle:F -01708- St Maurice de Beynost
.
965158.23mm³Volume:
Dessiné:
N°A1-ND-2235-1-Remplace: ...
M.DécollongeDate: 30/09/02
E.PutoudDate: 12-07-16
Discharge (1) or (2)
Mounting "1" with 4 holes Ø9x13
Mounting "4" with 4 holes Ø9x11
Suction (3)
Chemin du Pilon - 01700 Saint Maurice de Beynost - FRANCETél. +33 (0)4 78 55 83 00 - Fax. +33(0)4 78 55 53 19
www.sirem.fr - [email protected] Juin
201
6 - S
IRE
M -
Milk
_Tan
k_C
atal
og_E
N_2
016_
rev1
.0