innovation, performance, and more ......by placing biocompatibility at the heart of its innovation...

INNOVATION, PERFORMANCE, AND MORE BIOCOMPATIBILITY!

JAN 2020

ISO 13485

Sources : • Genotoxicity and cytoxicity of 2-hydroxyethyl methacrylate - Elzbieta pawlowska et ol - Mutation Research 696 (2010) 122-129 • Cytoxicity of the dental composite component TEGDMA and selected metabolic by-products in human pulmonary cells - J Emler et ol• TEGDMA and Bisphenol-A : the same level of risk in dental medicine ? - Jean-Marc Meyer - Autredent, No 56, pages 81-86, 2010

By placing biocompatibility at the heart of its innovation strategy, the French laboratory ELSODENT stands out with new dental materials that are always more efficient and safer for patients.With a 25-years clinical experience, ELSODENT designs and manufactures, in France, improved biocompatibility dental products. More health-friendly for patients, the product range also present unique clinical and physico-chemical qualities to meet the requirements of dentists in terms of saving time and economy.

The origin of BIO+ ELSODENT range

Alarmed by the potential toxicity of dental products commonly used and sold on the market, the French laboratory ELSODENT wanted to address the major concerns of dentists but also those growing health-conscious patients, by developping more health-friendly dental products.

Scientific background of the BIO+ rangeThese questions about dental products go back decades. During the 90s, amalgams, more commonly known as «fillings», containing mercury, were already challenged by a part of the scientific community.

Replaced today by composites, these new materials are now getting contested because of their significant potential toxicity. With formula based on compounds like TEGDMA, HEMA & BisGMA, these dental products can, under specific conditions, release in the mouth toxic substances for our organism and carcinogenic, like Formaldehyde and Bisphenol A.

Dental revolution

Based on its advanced clinical, technical and scientific skills, our laboratory has developed a complete range of composites, resins, adhesives agents, cements,... formulated without addition of these potentially dangerous monomers such as TEGDMA, HEMA, or BisGMA and its derivatives.Our formulations now offer non-hydrolysable substitution monomers issued from our R&D programs.Innovative and performant, the BIO + range is ideally suited to the needs of both dentists and patients, since these products benefit from improved biocompatibility while maintaining exceptional clinical and physicochemical properties.They are easily identified by the BIO+ logo and are presented in recyclable and / or recycled packaging.

INNOVATION, PERFORMANCE & CLINICAL FEATURES

BIOCOMPATIBILITY Formulation without addition ofBisGMA, TEGDMA, HEMA

Monomers currently used in dentistry and asssociated risks*

BisGMA (Bis Phenol Glycidyl Metacrylate)

Basic resin for composites and others dental products, synthetized from Bisphenol A (BPA) and Glycidyl Methacrylate.Also contains free BPA, quickly released by the products in the mouth, and found in saliva a few hours after use. When hydrolyzed, the product releases Bisphenol A.

TEGDMA (Triethyleneglycoldimethacrylate)

Resin used to make BisGMA more flowable. Beyond its intrinsic toxicity, its lipophilic nature allows it to easily penetrate cell membranes and interact with DNA. Easily hydrolysed by salivary enzymes to produce Formaldehyde.

HEMA (Hydroxy Ethyl Metacrylate)

A short-chain of resin, which easily crosses cell walls and can,like TEGDMA, interact with DNA. Interfering in DNA repair, this can lead to mutations and cancers. Easily hydrolysed by salivary enzymes to produce Formaldehyde.

*Sources : Mol Biol Rep (2012) 39:1561–1574 | Dental Materials Journal 19 (2) 139-152, 2000 | Mutation Research 696 (2010) 122–129 | Dental Materials 24 ( 2008) 1670–1675

Innovative and performant dental products, made in France and formulated without the addition of potentially toxic resins such as HEMA, BisGMA, TEGDMA.

This is the core of ELSODENT BIO+ approach when designing dental consumables with improved biocompatibility to offer more health-friendly products.

3www.elsodent.com

PF SEAL

PUREFILL FLOW

IMPR

ESSI

ON

IMPL

ANTO

LOG

YEN

DO

DO

NTI

CAC

CESS

ORI

ESCO

RE B

UIL

D-U

P M

ATER

IAL

TEM

PORA

RY

BRID

GES

& C

ROW

NS

CIM

ENTS

&

CAVI

TY L

INER

EQU

IPM

ENT

REST

ORA

TIO

NAC

CESS

ORI

ES

REFERENCES & DESCRIPTION

PUR-F-4-* 2 x 1,2 ml (2g) syringes + 10 tips.VITA shades:A1/B1 - A2 - A3 - A3,5 - B2

IR-100 100 pink needle tips. Gauge 18.*Shade MD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1

ADVANTAGESHigh flexural strength. Elongation at break > 5 mm

Very fluid. Reach the bottom of the thinnest fissures

Conversion rate > 60%

Hydrophobic High durability. No risk of detachment

Easy and fast use: etching, application then polymerization

Very resistant, less abrasion

Opaque white shade. Better contrast for a perfect surveillance application and a good survey.

INDICATIONSPits and fissures sealing

REFERENCES & DESCRIPTION

PFS-3,6 2 x 1,2 ml syringes + 10 tips. Opaque white shade

ETL 100 blue needle tips. Gauge 25MD : Class IIa certified by Tüv Rheinland (0197)

Pits and fissures sealantFormulation without addition of HEMA, TEGDMA, BisGMA

ADVANTAGESVery resistant. Flexural strength > 100MPa

Conversion rate > 60%

Highly filles (65% weight)

Thixotropic. Remains in place without flowing

Time saving. No metallic matrix needed

Stable. Does not polymerize under the chair light

INDICATIONSRestoration of small classes III and classes V

Cavity liner in the ‘’Bond and Flow’’ technique

Fix splints after orthodontic treatments or in case of mobile teeth

Flowable nano-hybrid compositeFormulation without addition of HEMA, TEGDMA, BisGMA

4 www.elsodent.com

PUREFILL 2

PUREFILL2 Filtek Tetric Clearfil G-Aenial ElsodEnt Supreme Evoceram Majesty GC 3M ViVadEnt Kuraray

PUREFILL 2 Filtek Tetric Clearfil G-Aenial Grandio Z100 Supreme Evoceram Majesty GC Voco 3M 3M ViVadEnt Kuraray

20s 30mn 24h 48h

INDICATIONSPosterior restorations (class I, class II, MOD)

Anterior restorations (class III and class IV)

Class V cavities

Aesthetic corrections (diastema, hypoplasia, discoloration)

Nano-hybrid, antero-posterior compositeFormulation without addition of HEMA, TEGDMA, BisGMA

ADVANTAGESLow shrinkage ~ 2 %Polymerization depth > 3mmHigh conversion rate ~ 70%Highly filled (80% weight)

Does not stick to instruments

Perfect consistency for easier use, anterior and posterior

Stable, does not polymerize under the chair light

Aesthetic. Excellent polishability

This is the first Elsodent composite developed from an innovative formulation without any addition of BisGMA, TEGDMA, HEMA, to get a low toxicity composite. Its higher biocompatibility, due to the non-hydrolysable monomers contained in the matrix of the product, leads to lower toxicity over time. It makes PureFill2 an essential product in our declaredapproach to public health.

REFERENCES & PRESENTATIONSPUR2-3-* 3g syringe. VITA shades

A1/B1 – A2 – A3 – A3,5 – B2 - C2 - Incisal - Bleach

PUR2-5* 20 x 0,25g compules. VITA shades A1/B1 - A2 - A3 - A3,5 - B2 - C2 - Incisal - Bleach

* Shade MD : Class IIa certified by Tüv Rheinland (0197)

COMPARATIVE PHYSICO-CHEMICAL TEST

* Tests conducted by G-Pharma. Volumetric shrinkage according ISO 17304. Flexural strength according to ISO 4049 - Zwick equipement. Conversion rate evaluated using a FTIR spectrometer with ATR mode. Polymerization by Elsodent curing light diam: 9mm - 600mW/cm² power at room temperature (20°C).

Conversion rate (%)*Flexural Strength (MPa)*

5www.elsodent.com

HEALBOND MPElsodEnt

HEALBOND MP

IMPR

ESSI

ON

IMPL

ANTO

LOG

YEN

DO

DO

NTI

CAC

CESS

ORI

ESCO

RE B

UIL

D-U

P M

ATER

IAL

TEM

PORA

RY

BRID

GES

& C

ROW

NS

CIM

ENTS

&

CAVI

TY L

INER

EQU

IPM

ENT

REST

ORA

TIO

NAC

CESS

ORI

ES

REFERENCES & PRESENTATIONSBMP-5 Adhesive - 5ml bottle

BMPA-5 Activator for dual-curing use - 5ml bottleMD : Class IIa certified by Tüv Rheinland (0197)

ALL-IN-ONE!

Shear bond strength* (MPa)


Activator for dual-mode

MULTI-PURPOSE INDICATIONS

HEALBOND MPCASE

ADHESIVE ACTIVATOR

PUREFILL 2(see p. 7)

Light-cure direct restoration Class I to V antero-posterior restorations

CORE D(see p. 14)

Self/Light-cure direct restoration (core build-up)

Core build-up Root-canal post sealing

INNOCEM(see p. 30)

Self/Light-cure indirect restoration

Indirect restorations Inlays, ceramic or composite veneers, Maryland bridges

ADVANTAGESMULTI-PURPOSE Direct & Indirect restorations

UNIVERSAL Powerfull shear bond strength on all support : tooth structures, ceramic, metal and zirconia

High shear bond strength: 13,9 MPaDesensitizing and eliminates residual bacteria

IMPORTANT NOTICE !ELSODENT formulation of INNOCEM allow HEALBOND MP to become DUAL without using an activator!

Universal self-etching light-cure adhesive system Formulation without addition of HEMA, TEGDMA, BisGMA

6 www.elsodent.com

HEALBOND MAXElsodEnt

OptibondXTRKErr

HEALBOND MAX

Adhesives Shear Bond Strenght*

INDICATIONSDIRECT RESTORATION Light-cure, self-cure, dual-cure composites

*In conjunction with INNOCEMINDIRECT RESTORATION Inlays and Onlays ceramic, metal (précious or non precious), Zircone, compositeVeneers

ADVANTAGESMULTI-PURPOSE Direct & Indirect* restorations

UNIVERSAL Strong adhesion on all surfaces: dental structures, ceramic, metal and zirconia

Compatible with all resin-cements, composites and core build-up materials, photo, auto or dual-cure

EFFICIENT Exceptionnal bonding strength when used on dentin and enamel

DURABILITY Hydrophobic once polymerized, for a long-lasting action, with no water absorption .Excellent quality of the seal over time

REFERENCES & PRESENTATIONSBMX-10 HEALBOND MAX Self-etching, Universal

bonding system (2 x 5ml bottles, primer + adhesive)

MD : Class IIa certified by Tüv Rheinland (0197)

NEW

Unique bonding solution, whatever the clinical case and the technique used

CLINICAL PROCEDURE

On the surface of enamel and dentin previously prepared, cleaned and dried and making sure to use a different disposable applicator for each component:

Apply Healbond Max Primer for 20 s. Air dry for 5 s.

Apply Healbond Max Adhesive for 15 sec. Air dry for 5 s.

Light-cure 10 s, then apply the com-posite according to the manufacturer’s instructions.

Dentin with Etching

Dentin Self-Etching

Ceramic mordançée

Metal Zirconia


Two-components universal self-etching light-cure adhesive system Formulation without addition of HEMA, TEGDMA, BisGMA

7www.elsodent.com

HEALBOND

OPAQ

IMPR

ESSI

ON

IMPL

ANTO

LOG

YEN

DO

DO

NTI

CAC

CESS

ORI

ESCO

RE B

UIL

D-U

P M

ATER

IAL

TEM

PORA

RY

BRID

GES

& C

ROW

NS

CIM

ENTS

&

CAVI

TY L

INER

EQU

IPM

ENT

REST

ORA

TIO

NAC

CESS

ORI

ES

INDICATIONSLight-cure composites on tooth structures

To desensitise cervical regions and free dentin areas

Dual-cure mode (core build-up), when mixed with Healbond activator

Light-cure bonding agentFormulation without addition of HEMA, TEGDMA, BisGMA

ADVANTAGESShear bond strength ~ 13,9 MPa

Desensitizing and eliminates residual bacteria

Good wetting properties to be used on slightly moist dentin surfaces (wet-bonding technique)

REFERENCES & PRESENTATIONSB-5 HEALBOND - 5ml bottle

BA-5 HEALBOND Activator for dual-curing - 5ml bottleMD : Class IIa certified by Tüv Rheinland (0197)

Activator for dual-cure mode

INDICATIONSTo hide exposed metal surfaces after fracture of the ceramic layer on bridges and crowns.

To cover the reactive dentin in deep class III, to avoid layers of composite

Light-cure opaquerFormulation without addition of HEMA, TEGDMA, BisGMA

ADVANTAGESHigh hiding power

Versatile in use

REFERENCES & PRESENTATIONSOPA-2 1 x 1,2ml syringe + 10 applicator tips. A3 shade

LTL 100 black needle tips. Gauge 20MD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.

8 www.elsodent.com

CORE D

CORE D FLOW

REFERENCES & PRESENTATIONS

CDB-25 25ml cartridge + 20 mixing tips + 20 intra-oral tips - white shade

CDD-25 25ml cartridge + 20 mixing tips + 20 intra-oral tips - dentin shade

EJ-100 100 yellow mixing tips

IJ-100 100 yellow intra-oral tips

IV-50 50 green intra-oral tipsMD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.


CDF-5 2 x 2,5ml syringes + 10 mixing tips + 10 intra-oral tips - dentine

EMP-100 100 brown mixing tip

IMP-100 100 intra-oral tipsMD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.

Very thixotropicNo matrix needed !

INDICATIONSCore build-up on non-vital teeth

Sealing root canal posts associated with a dual-curing bonding type HEALBOND MP

Dual-cure core build-up material Formulation without addition of HEMA, TEGDMA, BisGMA

ADVANTAGESVery thixotropic. Does not flow. No matrix needed. Improves operating field vision

Hardness equivalent to dentin. No different feeling while burring

Radio-opaqueHigh flexural strength > 140 MPaHigh compressive strength ~ 330 MPaHigh conversion rate



Dual-cure core build-up fluid material Formulation without addition of HEMA, TEGDMA, BisGMA

ADVANTAGESFlowable, with thin tips, to allow injection in small and narrow cavities.

Hardness equivalent to dentin. No different feeling while burring

High conversion rate = 68% (1h)

High flexural strength = 136 MPaHigh compressive strength ~ 330 MPa

9www.elsodent.com

CORE D LC

CORE D SC

CORE D LCElsodEnt

Clearfill Photocore Kuraray

CORE D LCElsodEnt

Clearfill Photocore Kuraray

IMPR

ESSI

ON

IMPL

ANTO

LOG

YEN

DO

DO

NTI

CAC

CESS

ORI

ESCO

RE B

UIL

D-U

P M

ATE

RIA

LTE

MPO

RARY

BR

IDG

ES &

CRO

WN

SCI

MEN

TS &

CA

VITY

LIN

EREQ

UIP

MEN

TRE

STO

RATI

ON

ACCE

SSO

RIES

NEW



Self-cure core build-up material Formulation without addition of HEMA, TEGDMA, BisGMA

ADVANTAGESThixotropic. Does not flow. No need for a matrix. Improves operating field vision

Fast setting time = 55s

Self-curing for a minimal shrinkage of the material

High flexural strength = 140 MPaHigh compressive strength ~ 330 MPa

Radio-opaque


Light-cure core build-up material Formulation without addition of HEMA, TEGDMA, BisGMA

ADVANTAGESEasy set up, even in small and narrow cavities

Thixotropic. Set-up without matrix. Time saving and optimized operating field vision

Highly charged (70% weight)

Amazing polymerization depth ~ 6 mm after 40s

High flexural strength ~ 136 MPaHigh compressive strength ~ 360 MPa

REFERENCES & PRESENTATIONSCDLCB-6 2x 3ml syringe + 10 needle tips (white)

CDLCD-6 2x 3ml syringe + 10 needle tips (dentin)

IR-100 100 pink needle tips. Gauge 18.MD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.


CDSCB-25 25ml cartridge + 20 mixing tips + 20 intra-oral tips - white

CDSCD-25 25ml cartridge + 20 mixing tips + 20 intra-oral tips - dentin

CDSCB-50 50ml cartridge + 20 mixing tips + 20 intra-oral tips - white

CDSCD-50 50ml cartridge + 20 mixing tips + 20 intra-oral tips - dentin

EJ-100 100 yellow mixing tips

IJ-100 100 yellow intra-oral tips

IV-50 50 green intra-oral tipsMD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.

10 www.elsodent.com

DUROC

REFERENCES & PRESENTATIONSDU-50 50ml cartridge + 10 mixing tips

EJ-100 100 yellow mixing tipsMD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.

Resin-based bite registration material, implant transfer caps splintingFormulation whithout addition of HEMA, TEGDMA, BisGMA

ADVANTAGESThixotropic : does not flow between teeth

Fast setting time ~ 40 s

Blue for a strong contrast

Easy to trim excess

The most rigid bite registration materials available

High flexural strength

Negligible linear shrinkage

Burn with no residue

INDICATIONSIMPLANTOLOGY Fixing together implant transfer caps before final impression

Bite registrationTo quickly and perfectly fix the two parts of a bridge infrastructure

To elaborate inlays cores in direct method

CLINICAL PROCEDURE

DUROC, implant transfer caps splinting

1 Implant transfers in place before impression.

2 Setting of Duroc is finished, giving free access to screws

3 Fitting 4 Impression made with the implant transfers

5 Replicas are in place (not screwed yet)

CLINICAL PROCEDURE

DUROC bite registration

1. & 2. Bite registration

11www.elsodent.com

11

MPa

PHOENIX ExperTemp Structur3 Protemp4 ELSODENT ultradEnt Voco 3M

PHOENIX MD

PHOENIX

IMPR

ESSI

ON

IMPL

ANTO

LOG

YEN

DO

DO

NTI

CAC

CESS

ORI

ESCO

RE B

UIL

D-U

P M

ATER

IAL

TEM

PORA

RY

BRID

GES

& C

ROW

NS

CIM

ENTS

&

CAVI

TY L

INER

EQU

IPM

ENT

REST

ORA

TIO

NAC

CESS

ORI

ES

REFERENCES & PRESENTATIONSPHMD-50-A1 50ml cartridge + 10 mixing tips - shade A1

PHMD-50-A2 50ml cartridge + 10 mixing tips - shade A2

PHMD-50-A3 50ml cartridge + 10 mixing tips - shade A3

EJ-100 100 yellow mixing tips.MD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.

Resin for temporary bridges and crownsFormulation without addition of HEMA, TEGDMA, BisGMA

ADVANTAGESThixotropic. does not flow and can be injected directly into the mouth around the abutment tooth

High flexural strength and slight resilience

Very thin oxygen inhibition layer

A new layer can be applied on top of an existing one up to 2 or 3 days after max.

Setting time = 2min 45s

INDICATIONSINDIRECT METHOD Temporary crowns and long temporary bridges, with a pre-impression

INDIRECT METHOD Temporary crowns directly in mouth. A temporary crown can be made in mouth within 3 min max.

* Tests carried out with a Zwick equipment, according to ISO 11405

REFERENCES & PRESENTATIONSPH-50-A1 50ml cartridge + 10 mixing tips - shade A1

PH-50-A2 50ml cartridge + 10 mixing tips - shade A2

PH-50-A3 50ml cartridge + 10 mixing tips - shade A3

EB-100 100 blue mixing tips.MD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.

Resin for temporary bridges and crownsFormulation without addition of HEMA, TEGDMA, BisGMA

ADVANTAGESHigh flexural strength > 100 MPaExtremely reduced inhibition oxygen layer: the surface of the cured material is almost dry

Easy and fast to use

Aesthetic

INDICATIONSTemporary crowns

Small temporary bridges, with a pre-impression (indirect method)

Flexural strength*

12 www.elsodent.com

201006366_201905

G-PHARMA35, avenue du Gros ChêneB.P. 10279 HERBLAY95617 CERGY-PONTOISE Cedex [email protected]

TopBaseDate de révision : 02-2019

Depuis 12-2017

4a 4b

1

6

7

9

2a 2b

3

5

8

2. Rendre la surface légèrement rugueuse, avec du papier de verre, une fraise ou sabler l’intrados de la prothèse avec de l’oxyde d’alumine. [cf 1]

3. Nettoyer la surface avec de l’alcool puis sécher parfaitement avec un air sec exempt d’eau et d’huile.

Rebasage1. Positionner la plaque sur l’intrados de la prothèse en prenant soin de bien la centrer.

[cf 2a - 2b]2. A l'aide d'un pulseur à air chaud (température réglée à 250 °C) ou d’un sèche-

cheveux, chauffer la plaque en commençant par le centre, puis continuer sur les côtés afin de répartir la chaleur équitablement. [cf 3]

3. Une fois la plaque ramollie uniformément, elle devient transparente et adhère à l'intrados de la prothèse. [cf 4a - 4b]

4. Si nécessaire, avec vos gants légèrement humides, plaquer bien le produit sur l’intrados pour obtenir un meilleur contact et une excellente adhésion, tout en évitant d’emprisonner des bulles d’air. [cf 5]

5. Eliminer déjà, les excès de matériau sur les bords de la prothèse, avec les doigts bien humides. [cf 6-7]

6. Plonger le produit dans un bol d’eau chaude à 70°c [cf 8] avant la mise en bouche pour éviter que la plaque ne colle à la muqueuse en cas d’hyposialie et pour améliorer l’enregistrement des détails de la muqueuse.

7. Une fois la prothèse, en bouche, demander au patient de serrer les dents pendant 2 minutes, afin que la plaque enregistre parfaitement tous les détails de la surface de la muqueuse. [cf 9]

8. Retirer de la bouche. Si une modification est nécessaire, il est possible de réchauffer TopBase à l’infini, et de réinsérer la prothèse en bouche, sans oublier au préalable de la retremper dans le bol d’eau chaude 15 secondes.

9. Eliminer les excès et polir avec une cupule ou un disque en caoutchouc. On peut aussi rechauffer les bords pour arrondir le produit.

ConseilLe contact et donc la tenue en bouche sera améliorée si la prothèse est préalablement mouillée avant la remise en bouche. Toujours tremper la prothèse dans le bol d’eau chaude avant chaque mise en bouche.Temps de priseLe temps de prise total jusqu’à complète réticulation est d’environ 3 minutes maximum.Stockage et durée de vieNe pas exposer aux rayons du soleil directs ou à des sources de chaleur. Conserver à une température inférieure ou égale à 32°C. Dans ces conditions, la durée de vie des plaques TopBase est de 36 mois.Présentation & référencesTPU - Kit de 2 plaques maxillaires TPD - Kit de 2 plaques mandibulairesTPK - Kit de 1 plaque maxillaire & 1 plaque mandibulaire TPCLU - Kit clinique de 10 plaques maxillaires TPCLD - Kit clinique de 10 plaques mandibulaires

Note importanteNe pas jeter la boite et la notice avant l’utilisation complète du produit. Une humidité élevée pourrait endommager les emballages comportant les informations importantes et légales. Un stockage à une température trop élevée peut faire vieillir prématurément le produit. Délégation de responsabilitéCe produit a été développé en vue d’une utilisation dans le domaine dentaire seulement et doit être mis en œuvre selon le mode d’emploi. Les dommages pouvant résulter du non-respect de ces prescriptions ou d’une utilisation à d’autres fins que celles indiquées n’engagent pas la responsabilité du fabricant. L’utilisateur est tenu de vérifier sous sa propre responsabilité l’appropriation du produit à l’utilisation prévue, et ce d’autant plus si celle-ci n’est pas citée dans le mode d’emploi.

TOPBASE


TPU TOPBASE Kit of 2 maxillary plates

TPD TOPBASE Kit of 2 mandibular plates

TPCLU TOPBASE Clinical kit of 10 maxillary plates

TPCLD TOPBASE Clinical kit of 10 mandibular plates

TPK TOPBASE Set 1 maxillary plate + 1 mandibular plates

DM class IIa

Thermoplastic plate to reline denturesBIOCOMPATIBLE, BisGMA, TEGDMA, HEMA-FREE

ADVANTAGESVery easy and fast use

No mixing of products

A perfect relining in 10 to 15 minutes only

With a good air dryer, or a heat air gun

Sticks directly and strongly to any type of resins used for dentures

Very economicalAesthetic

Accurate recording of details of the mucosa

Can be re-shaped anytime by re-heating it as many time as needed

Biocompatible, no addition of BisGMA, TEGDMA, HEMA. No toxicity

INDICATIONSSemi-definitive, hard relining of dentures

Demo video

CLINICAL PROCEDURE

1. Clean the intrados of the prosthesis, Make the surface slightly rough, with sandpaper, a bur then rinse with alcohol and dry thoroughly.

2. Center the plate on the intrados of the prosthesis [cf 2a - 2b]3. Heat the plate from the centre to the sides to distribute the

heat evenly. [cf 3]4. Once the plate has softened uniformly, it’s translucent and

adheres directly to the intrados of the prosthesis. [cf 4a - 4b]5. Push the soften plate into the intrados (wet gloves) [cf 5]6. 7. Start immedialtely to remove material in excess, on the

edges of the prosthesis with your fingers wets. [cf 6-7].8. Immerse in hot water (70°C) [cf 8], before putting it in mouth,

to avoid any risk for the plate to sick to the mucosa, in case of hyposalia.

9. Once in mouth, ask the patient to bite firmly for 2 minutes, in order to accurately register all the details of the surface of the mucosa. [cf 9]. Remove from the mouth then eliminate excesses and polish with rubber cup or disc.

13www.elsodent.com

SEAL TEMP & SEAL TEMP S

IMPR

ESSI

ON

IMPL

ANTO

LOG

YEN

DO

DO

NTI

CAC

CESS

ORI

ESCO

RE B

UIL

D-U

P M

ATER

IAL

TEM

PORA

RY

BRID

GES

& C

ROW

NS

CIM

ENTS

&

CAVI

TY L

INER

EQU

IPM

ENT

REST

ORA

TIO

NAC

CESS

ORI

ES

Temporary resin-based cementsFormulation without addition of HEMA, TEGDMA, BisGMA

ADVANTAGESPerio-friendlyThanks to the smooth cement texture, the gum completely heals within 2 to 3 days

Any procedure (impression, etc) can be performed withtout haemostatic problems

Suitable use on vital teeth

Time saving The cement sticks to the intrados of the temporary crowns: The prepared teeth always remain clean

Before putting the temporary crown back on the tooth:

SEAL TEMP : just apply a new layer of cement. If a supra-occlusion occurs, just trim the external surface of the temporary crown.SEAL TEMP S : remove the old layer of cement with tweezers, prior to applying a new one

2 complementary cements for all clinical cases

REFERENCES & PRESENTATION

ST-25 SEAL TEMP 2x 12,5g syringes (base + catalyst)

STD-16 SEAL TEMP 2x 5ml dual syringes + 20 mixing tips

STD-8 SEAL TEMP 1x 5ml dual syringe + 10 mixing tips

STS-25 SEAL TEMP S 2x12,5g syringes (base + catalyst).)

STDS-16 SEAL TEMP S 2x 5ml dual syringes + 20 mixing tips

STDS-8 SEAL TEMP S 1x 5ml dual syringes + 10 mixing tips

EM-100 100 brown mixing tips.MD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.

INDICATIONSSEAL TEMP - Strong retention strengthTemporary bridges and crowns on low abutment teeth.

Long-term temporary crowns (2-3 months).

Definitive cementation of crowns on implant, except prosthetics elements in Zirconia

SEAL TEMP S - Classic retention strengthTemporary bridges and crowns on normal abutment teeth and implants

Temporary cementation of definitive veneers to valid aesthetic

14 www.elsodent.com

INNOCEM Breeze Relix Panavia Cement SmartCem2 G-Cem MaxCem PEntron Unicem Kuraray Resin SE dEntsPly Gc Elite 3M cybErtEch KErr

20 s 6 mn 30 mn

INNOCEM Relyx Panavia Breeze Cement MaxCem G-Cem Unicem Kuraray PEntron Resin SE Elite Gc 3M cybErtEch KErr

INNOCEM Relyx Panavia SmartCem MaxCem Breeze G-Cem Unicem Kuraray 2 Elite PEntron Cement 3M dEntsPly KErr GC

Dentine Métal Zircone Céramique

INNOCEM

REFERENCES & PRESENTATIONSIC-10 -TA2 5ml syringe + 10 mixing tips + 10 regular intra-

oral tips. Translucent A2 shade

IC-10-OA2 5ml syringe + 10 mixing tips + 10 regular intraoral tips. Opaque A2 shade

IC-10-OA3 5ml syringe + 10 mixing tips + 10 regular intraoral tips. Opaque A3 shade

MD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.

Conversion rate*

Flexural strength*

Shear bond strength*

* Tests conducted by G-Pharma. Flexural Strength according to ISO 4049 and carried out with a Zwick equipment. Conversion rate using FTIR spectrometer (ATR). Shear bond strength according to ISO 11405 and carried out with a Zwick equipment

TESTS RESULTS & COMPARISON

Excellent adhesion to Etched ceramic: 23,9 MPa Dentin: 14,10 MPaZirconia: 19,3 MPa Metal: 23,81 MPa

INDICATIONSMetal, composite, etched (or silanisated ceramic) inlays, onlays, crowns and bridges

In conjunction with HEALBOND MP Maryland bridges of 2 to 3 elements Etched (or silanisated) ceramic veneers. Root canal posts (metallic or fiber posts)

Self-adhesive universal permanent resin cementFormulation without addition of HEMA, TEGDMA, BisGMA

ADVANTAGESStrong adhesion to dentin, metal, Zirconia, composite and etched (or silanated) ceramic

Unsurpassed conversion rate = 58,40% (30 min.)

Résistance à la flexion excellente = 90 MPa

Fast and easy to use - No pre-treatment required in most cases After 5 seconds of polymerisation, the excesses remain slightly rubbery to be easily removed

Strong hiding power (opaque versions). Perfect for cementation of aesthetic prosthetics elements on implant abutments, or on metallic elements such as inlay core and amalgams

Slight hydrophilia before polymerization for collagen fibers and phosphate ions complexation (vital teeth) and hydrophobia for a long-term and stable adhesion

IMPORTANT NOTICE !INNOCEM formula allows HEALBOND MP to become DUAL without addition of an activator.

15www.elsodent.com

NOTRE DAM

PROREZ

IMPR

ESSI

ON

IMPL

ANTO

LOG

YEN

DO

DO

NTI

CCO

RE B

UIL

D-U

P M

ATER

IAL

TEM

PORA

RY

BRID

GES

& C

ROW

NS

CIM

ENTS

&

CAVI

TY L

INER

EQU

IPM

ENT

REST

ORA

TIO

NAC

CESS

ORI

ES

REFERENCES & PRESENTATIONSPRZ-16 2 x 5ml dual syringes + 20 mixing tips + 20 intra-

oral tips

EMP-100 100 brown mixing tip

IMP-100 100 intra-oral tipsMD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.

Dual-cure composite for temporary fillingFormulation without addition of HEMA, TEGDMA, BisGMA

ADVANTAGESFast setting : 45 sec (self-curing mode)

Easy to place, even in small or narrow cavities, with the dual syringe and its intra-oral tip

ThixotropicWaterproofEasy to remove with a probe or a curette

Aesthetic A3 shade

Fluoride release

INDICATIONS Temporary filling for inlay and onlay preparations

Temporary filling for implant screw holes

Temporary filling for other cavities to be protected (after endodontic treatments...)

INDICATIONSRestorative dentistry To hold Teflon® film in place when luting aesthetic venners, or making a class II composite involving the contact point

Prosthodontic To fill up undercuts before impression, to avoid tearing off the material

Endodontic To insure a waterproof joint of the rubber dam around a tooth during an endodontic session.To build temporary tooth walls during endodontic sessions, to hold the irrigating liquid in place

Bleaching Protection of soft tissues during bleaching process

Multipurpose light-cure liquid damFormulation without addition of HEMA, TEGDMA, BisGMA

ADVANTAGESLow exothermic reaction to avoid harmful reaction of the mucosa

Excellent thixotropy for an easy setting

Versatile multi-purpose

Blue for a good contrast

REFERENCES & PRESENTATIONSND- 4 2 x 1,2ml syringes + 10 tipss

LTL 100 black needle tips. Gauge 20Dispositif médical de classe IIa certifié par Tüv Rheinland (0197) hors embouts, classe I

LABORATOIRE ELSODENT 35 av du Gros Chêne | BP50072 HERBLAY | 95612 CERGY-PONTOISE CEDEX Tél : +33 1 30 37 75 75 | Fax : +33 1 34 40 07 04 | Email : [email protected]

INFO & CONTACT

+33 (0) 1 30 37 75 75 [email protected]

www.elsodent.com

ISO

134

85

CTBIO-02 EN JAN-20

Den

tal

med

ical

dev

ices

for

den

tal

prof

essi

onna

ls o

nly,

not

ref

unde

d by

the

Hea

lth I

nsur

ance

. Ca

refu

lly r

ead

the

intr

uctio

ns o

n th

e pr

oduc

t pac

kagi

ng a

nd n

otic

es b

efor

e us

e. O

ur p

rodu

cts

are

man

ufac

ture

d by

G-P

harm

a ce

rtifi

ed b

y Tü

v Rh

einl

and

acco

rdin

g to

the

ISO

134

85 s

tand

ard.

innovation, performance, and more ......by placing biocompatibility at the heart of its innovation...

Documents