innovv™ innowcs - goldwingdocs.com

2
INNOVV™ https://www.innovv.com m Product Over View I INNOWCS WiFi Full HD Remote Lens Motorcycle Camera System Installation Guide l.DVR 2.Lens 3.Lens Cable 4.Power Cable S.Lens Plug 6.Thumb Screw 7.Power Cable Connector 8.12V to SV DC Converter 9.DVR Holder . 10.External Mic 1l.internal Mic Hole 12.Mini USB Port 13. Reset Hole 14. SD card Slot lSI Installation Reference I [I Camera Bracket Installation Ii] Camera and DVR Connection (l12V DC Converter Connection I -,. [V r "-T ! ,.,. 1:1 Installation Instructions I Input Wires Connection: Red Wire: + (Positive Battery Terminal), Black Wire: - (Negative Battery Terminal) Yellow Wire: To 12V Switched Power Source, that is to trigger power supply from power source to camera system when ignition is on. OUTPUT: DC SV 2A (Max). There is 10 second delay for ignition power on or power off. Locate a position that will allow the best view. Ensure the mount is secure and will not interfere with the operation of the motorcycle. Consider the range of motion on the front forks of a motorcycle. The camera may be mounted in several positions using the provided mounting accessories. Ensure you do not unscrew camera case or it may cause damage to lens inside. Route the camera cable in a safe manor back to the DVR location. Ensure the cables are not subjected to a pinch point or in an area that will expose it to high temperature from the engine, and keep cable away from all of the other cables (particularly head light, taillight cables) to avoid EMI (Electro-Magnetic Interference). The CS is designed to start/stop recording when the ignition is turned on/off. The yellow wire from the supplied DC 12V to SV converter is to connect the switched power source which has power only when the main ignition switch is on. Red wire is to connect the reliable and stable 12V power source, like the positive terminal of battery. Black wire is to ground connection. Please keep a distance between DVR and Converter. The CS can be powered up by SV 2.1A using a USB cable(Not included) to the USB port. The CS has an internal Mic to record audio. An external microphone (not included) can also be connected to the camera to record communications, etc. n Like us on facebook! www.facebook.com/lnnovv

Upload: others

Post on 25-Jan-2022

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: INNOVV™ INNOWCS - goldwingdocs.com

INNOVV™https://www.innovv.com

mProduct Over View I

INNOWCSWiFi Full HD Remote LensMotorcycle Camera SystemInstallation Guide

l.DVR

2.Lens

3.Lens Cable

4.Power Cable

S.Lens Plug

6.Thumb Screw

7.Power Cable Connector

8.12V to SV DC Converter

9.DVR Holder

. 10.External Mic

1l.internal Mic Hole

12.Mini USB Port

13. Reset Hole

14. SD card Slot

lSI Installation Reference I

[I Camera Bracket Installation Ii] Camera and DVR Connection

(l12V DC Converter Connection I

-,.

~v [V ~r "-T

! ,.,.

1:1 Installation Instructions I

Input Wires Connection:

Red Wire: + (Positive Battery Terminal), Black Wire: - (Negative

Battery Terminal)

Yellow Wire: To 12V Switched Power Source, that is to trigger

power supply from power source to camera system when

ignition is on.

OUTPUT: DC SV 2A (Max).

There is 10 second delay for ignition power on or power off.

• Locate a position that will allow the best view.

• Ensure the mount is secure and will not interfere with the operation of the motorcycle. Consider the range of motion on the front forks of a motorcycle.

• The camera may be mounted in several positions using the provided mounting accessories. Ensure you do not unscrew camera case or it may cause damage to lens inside.

• Route the camera cable in a safe manor back to the DVR location. Ensure the cables are not subjected to a pinch point or in an area that will expose it to high temperature from the engine, and keep cable away

from all of the other cables (particularly head light, taillight cables) to avoid EMI (Electro-Magnetic Interference).

• The CS is designed to start/stop recording when the ignition is turned on/off.

• The yellow wire from the supplied DC 12V to SV converter is to connect the switched power source which has power only when the main ignition switch is on. Red wire is to connect the reliable and stable 12V

power source, like the positive terminal of battery. Black wire is to ground connection.

• Please keep a distance between DVR and Converter.

• The CS can be powered up by SV 2.1A using a USB cable(Not included) to the USB port.

• The CS has an internal Mic to record audio. An external microphone (not included) can also be connected to the camera to record communications, etc.

n Like us on facebook!

www.facebook.com/lnnovv

Page 2: INNOVV™ INNOWCS - goldwingdocs.com

INNOilII™https://www.innovv.com

INNOVV C5WiFi Full HD Remote LensMotorcycle Camera SystemUser Manual

• Please follow instructions below to download the INNOVV C5 mobile WiFi app for both Android & iOS.

• microSD card should be formatted in-device using the mobile app before recording begins.

• Please do not attempt to repair, modify, or alter this product and/or it's accessories.

• Please charge this device for one hour prior to initial power up.

PI Key Indicator and Function I

Hold for 3-seconds until RED light begins to flash to power device ON & initiate recording.

Power Key Hold for 3-seconds until RED light begins to flash to power device OFF & terminate recording.

A continuous flashing red light will indicate a microSD card error.

WiFi is ready to connect shortly after the device is powered ON. A steady flashingGREEN light will indicate the connection is on WiFi stand-by.

WiFi Key A successful and continuous connection will be indicated by a solid GREEN light.

Press WiFi Key again to drop the connection and enter WiFi stand-by.

USB Port Charging port for the internal battery & data transfer port between external devices.

Reset Key Hold down reset key to trigger a device reboot in case of error.

Motion detection recording is designated by the icon "(~')" in the mobile app.Motion Once movement is detected, recording starts and is indicated by a flashing RED light.Detection

After 10-seconds recording will stop until movement is detected again.

Parking mode recording is designated by the icon" • " in the mobile app.

Parking The internal battery will be utilized to record impact events regardless of external power

Mode supply. Device will record 1-minute segments of each event before powering down.

Recordings will not be protected if external power supply is active.

Operation and LED Indicator

Operation Power Key (Red Color) WiFi Key (Green Color)

Living record RED light slow flash (1x per second)

Recording Stopped RED light solid (no flashing)

Pnatograph RED light fast flash (3 times)

WiFi Connection Stand-By GREEN light flash (1x per second)

WiFi Connection Stable GREEN light solid (no flashing)

WiFi Terminated GREEN light will flash slowly

No microSD Card RED light fast flash (3x per second)

microSD Card Formating RED light stop once and on again

Firmware UpgradeRED light flash once per second, andthen 3 times per seconds until stop

lSI App download and Operation liE App Connection

• Select INNOVV_C5_*** from WiFi networks to connect

• Settings => Wireless & networks => INNOVV C5

• Default password is 12345678

[;IJ APP Screen Shots

lim Links

• Website: https:!/www.innovv.com

• Blog: Click to visit INNOVV official blog page.

• Shop: Click to purchase products from iNNOVV online store.

• Share: Click to upload photos you take on your rides, video clips

recorded using INNOVV camera system, to share fun riders

worldwide.

INOVV CS App Logo

To exit full screen video.

Parking mode

For Apple Device

~#:tTo view full screen video Jii '"

-Motion detection

For Android Device

Click 0 to enter into recording section.

Red dot is flashing if camera system is recording, Click. 0 stop recording, and Clic • 0 start recording.

~~*' to adjust brightness.

II back button

Click 0 To review recordings and photos.

Recordings and photos can be toggled to play, review, download or delete.

iii Recording

1m Downloading the App

a) Search and download INNOVV C5 on the Google Play Store for Android or the App

Store for Apple devices. Compatible with iOS 8.3 or Android 5.1 above.

b) Scan QR code below to download INNOVV C5 App right to your device.

C) Storage must be allowed from App permissions for downloading videos/photos from

[I Package included Ii] Trouble Shooting Fault Key Indicator

Trouble Shooting

Causes Operation

1. WiFi has been disconnected Turn WiFi network ON and OFF, then reconnect

Format microSD card using the function of Memory Card FormattingfromAPP

Correct wire connection between 12v to 5v converter to power source

Change microSD card or Format microSD card

Check video cable

Change microSD card to be high speed (Class 10 or Above)

Format microSD card and Set G-sensor to low level or off

7. Video cable is defective

6. Wrong power source connection

3. Loop Video is Off, microSD card is full.

2. microSD card is defective or not compatible

1. microSD card is unreadable

Blue Light ON (No flashing) 2. The distance between Mobile device & Camera .. ..Red Light ON or Flashing system is too far, or the WiFi singsl was blocked Move Mobile deVice close to Camera system and reconnect WIFI

3. The mobile device is not compatible. Wifi Upgrade or change the mobile deviceconnection is weak

4. Too many protected video clips, microSD card

Blue Light ON (No flashing) ~i~S~fu!!!,II.~~_~~,.-,_----=~-=-__-+-,-;-========-=- -jRed Light ON or Flashing 5. Unfirmed conneciton between Type C Unplug Type C connector and replug

connector

microSD card inserted,power on camera system,on recording

WiFi is connected, App hastermindated or processing

Please refer to our troubleshooting

instructions below for any problems or

errors that may arise. Please also contact

your INNOVV dealer for additional

information and guides.

lx DVR,

1 x Lens with video cable,

1 x DC 12v to 5v converter,

1 x Bracket pack for lens,

1 x Bracket pack for DVR,

1 x SD Card Reader,

1 x User Manu,

Memory Card not included

8. Wrong settings or system corrupt Reset camera system, or Reinstall firmware

microSD card inserted.power oncamera system,on recording

Blue Light OFFRed Light OFF

1. Low power supply from the power source

2. Wrong wire connection between 12v to 5vconverter to ower source

Check power supply

Correct wire connection

Without external powersupply;Press power buttonand no initiation.

Blue Light OFFRed Light OFF

Internal battery drain Charging the internal battery for one hour using USB cable

Can not downloadvideos/photosfrom camerato device.

Storage must be allowed from App permissions for downloadingINNOW C5 app does not have permission to videos/photos from camera to your device.store data to your celular device. Settings => App Permissions => INNOW C5 => Storage

Settings => App => INNOW C5 => Storage

Live recording disapearsafter device is locked.

Screen locked and live recording can not be Display on the lock screendisplay on the lock screen. Settings => App => INNOW C5 => Notifications

II Like us on facebook!

www.facebook.com/lnnovv