inserting tools for screwdriversd 3320 e 06.2010 inserting tools for screwdrivers bits sockets...
TRANSCRIPT
D 3320 E 06.2010
Inserting Tools for Screwdrivers
BitsSocketsFindersBit holders
With the longest lifetime and highest wearresistance combined with the best fits, ourinserting tools are designed for the industrialuse.
The large variety of this assortment combinesstandard inserts and inserts for special appli-
cations. If those cannot be used, we also offercustom made bits. Whatever fastener needsto be assembled, we have the right tool foryou. To achieve the utmost economical solutionin regard to wear, usage and price, DEPRAGwill support you with detailed advise andservice. Please don’t hesitate to ask us.
Screwdriving technology Automation Air motors Air tools
This brochure shows a small selection of in-serting tools available for our MICROMAT-/MINIMAT-screwdrivers.
You will find a much larger range of theseinserting tools on the Internet as follows:
www.deprag.com / Screwdriving Tech-nology / Selection program: Inserting Tools
This selection program is updated permanentlyand allows you to look for suitable insertingtools for your DEPRAG screwdriver yourself.
Simply pick the required parameters from theshown listing by mouse click and you will getthe respective part no. including an informationabout the lead time.
All you have to do now is to send an inquiryto [email protected] via e-mail and we willarrange to send you our related offer eitherdirectly or via our respective local represen-tative.
2
PRODUCT SPECTRUM INSERTING TOOLS
FIND A MUCH LARGER RANGE OF INSERTING TOOLS ON THE INTERNET
Inserting Tools Type of Screw find on
for MICROMAT-Screwdrivers
bits, finders slotted screws Page 3bits, finders, bit holders PHILLIPS and POZIDRIV screws Page 4bits, bit holders allen screws, torx screws and
threaded pins Page 4 / 5sockets with shaft hex. screws and hex. nuts Page 5semi-finished bits and finders, special bits – Page 5
for MINIMAT-, Recycling-, Slip clutch-, Pulse tools, Electric Screwdrivers
bits, finders, bit holders, special bits slotted screws Page 6 / 7bits, finders, bit holders PHILLIPS and POZIDRIV screws Page 8 / 9threaded bit tips, bit holder (threaded), semi-finished finders,special bits, adapters and chuck for stud screws Page 10 / 11threaded bit tips torx screws Page 10bits, bit holders allen screws, torx screws and
threaded pins Page 12 / 13
for SENSOMAT- and MINIMAT-T-Screwdrivers
sensor sleeves, bits slotted screws Page 14 / 15sensor sleeves, bits, bit holders PHILLIPS and POZIDRIV screws Page 14 / 15
for Ratchet wrench
sockets, holder hex. screws and hex. nuts Page 16
for MINIMAT-, Recycling-, Slip clutch-, Pulse tools, Electric Screwdriver, Impact Wrenches and EC-SERVO-Screwdriver
sockets hex. screws and hex. nuts Page 16 / 17 / 18extensions / ball joints internal-�, external-� Page 18 / 19bits, holder internal hex. screws, threaded pins Page 19 / 20chuck for stud screws stud screws Page 19locking pins and rubber rings – Page 20
3
Bits, finders (without and with screw suction)
FOR MICROMAT-SCREWDRIVER
Bits, slotted finders, bit holder (non-magnetic)
Bits, finders, bit holder (magnetic)
External hex. driveA3 DIN 3126 (.118”)
order no.
3.84.24.34.54.75.55.6
.20
.22
.22
.22
.24
.28
.28
mm in. order no.
80 39 4580 39 4980 39 4980 39 4980 39 4680 39 4880 39 48
.020 x .122
.024 x .134
.024 x .134
.024 x .134
.024 x .134
.032 x .154
.032 x .154
in.
80 36 0680 39 3580 39 3580 39 3580 39 3580 36 0780 36 07
order no.
80 39 29
slotted screws finder bit bit holder (magnetic)
.150
.165
.170
.177
.185
.216
.220
in.
5.05.55.55.56.07.07.0
mm
0.5 x 30.6 x 3.50.6 x 3.50.6 x 3.50.6 x 3.50.8 x 40.8 x 4
mmbladehead dia.
35 (13/8”)12
(15/32”) (3/8”
ø9.5
57 (21/4”)
ø6.5
(1 /4”)
d
28 (13/32”)
3.84.24.34.54.75.55.6
.20
.22
.22
.24
.24
.28
.28
mm in. order no.
80 39 4034 17 8334 17 8480 39 4480 39 4480 39 4380 39 43
.020 x .122
.024 x .134
.020 x .122
.024 x .134
.024 x .134
.032 x .154
.032 x .154
in.
80 36 0680 39 3580 36 0680 39 3580 39 3580 36 0780 36 07
order no.
80 39 30
order no.
slotted screws bitfinder bit holder (non-magnetic)
.150
.165
.170
.177
.185
.216
.220
in.head dia.
5.05.55.56.06.07.07.0
mmd
0.5 x 30.6 x 3.50.5 x 30.6 x 3.50.6 x 3.50.8 x 40.8 x 4
mmblade
28 (13/32”)36.5 (17/16”)
12.5(1/2”) (3 /8
”)ø9
.5
57 (21/4”)
ø6.5
(1 /4”)
3.03.03.84.24.34.54.75.6
4.04.04.85.35.55.65.86.6
mm order no.
325612341697323862341739341740341698341702323864
.016 x .080
.016 x .098
.020 x .122
.024 x .134
.020 x .122
.024 x .134
.024 x .134
.032 x .154
in.
341689341690323854341691323854341691341691341692
order no.
slotted screws finder1) bit
.118
.118
.150
.165
.170
.177
.185
.220
in.head dia.
4.04.04.85.35.55.65.86.6
mm
.16
.16
.19
.21
.22
.22
.23
.26
in.d
0.4 x 2.00.4 x 2.50.5 x 3.00.6 x 3.50.5 x 3.00.6 x 3.50.6 x 3.50.8 x 4.0
mmblade
10 (3/8”)50 (131/32”)
1) hereto spring sleeve cpl., see leaflet of respective screwdriver Accessories (Optional Equipment)
External hex. driveA3 DIN 3126 (.118”)
External hex. driveA3 DIN 3126 (.118”)
External hex. driveC4 DIN 3126 (5/32”)
External hex. driveC4 DIN 3126 (5/32”)
Internal hex. driveD4 DIN 3126 (5/32”)
Internal hex. driveD4 DIN 3126 (5/32”)
4
Bits, finders (without and with screw suction)
Bits, bit holders (non-magnetic and magnetic)
Bits, bit holders (non-magnetic and magnetic)
FOR MICROMAT-SCREWDRIVER
AFmm
—0.91.522.53
order no.
—803955803956803957803958803959
T 6T 7T 8T 9T 10T 15
order no.
803600803604803601803603803602803608
803930 803929
order no. order no.
Torxallen bitallen screws, threaded pins
Torx-
bit holder (non-magnetic) or bit holder (magnetic)
Torx 57 (21/4”)
ø6.5
(1 /4”)
28 (13/32”) 28 (13/32”)
point sizePHILLIPSorder no.
POZIDRIVorder no. order no. order no.
012
803950803951803952
803924803925803612
PHILLIPS screws bit bit holder (non-magnetic) or bit holder (magnetic)
803930 803929
POZIDRIV screws57 (21/4”)
ø6.5
(1 /4”)
28 (13/32”)
32 39 0632 39 0632 39 0732 39 0732 39 0732 39 0732 39 0732 39 0732 39 0732 39 0732 39 07
80 36 1380 36 1332 39 0832 39 0832 39 0832 39 0832 39 0832 39 0832 39 0832 39 0832 39 08
32 39 0632 39 0632 57 4132 57 4132 39 0732 39 0732 39 0732 39 0732 39 0732 39 0732 39 07
35 35 7135 35 7133 02 0133 02 0132 39 0832 39 0832 39 0832 39 0832 39 0832 39 0832 39 08
.118
.125
.150
.157
.165
.170
.185
.196
.216
.220
.236
in.pointsize
00111111111
PHILLIPSorder no.
POZIDRIVorder no. mm
3.84.24.85.25.25.25.76.66.66.67.0
PHILLIPSorder no.
POZIDRIVorder no.order no.
32 38 6132 97 1932 38 6232 62 3032 45 7132 45 7132 43 4132 62 3132 38 6432 38 6432 46 59
with screw suctionfinder1) bitPHILLIPS screws
POZIDRIV screws
3.03.23.84.04.24.34.75.05.55.66.0
mm
without screw suctionbit
in.
.15
.16
.19
.20
.20
.20
.22
.26
.26
.26
.27
head dia. d
50 (131/32”) 50 (131/32”)10 (3/8”)
1) hereto spring sleeve cpl., see leaflet of respective screwdriver Accessories (Optional Equipment)
External hex. driveA3 DIN 3126 (.118”)
External hex. driveA3 DIN 3126 (.118”)
External hex. driveA3 DIN 3126 (.118”)
External hex. driveA3 DIN 3126 (.118”)
External hex. driveC4 DIN 3126 (5/32”)
External hex. driveC4 DIN 3126 (5/32”)
External hex. driveC4 DIN 3126 (5/32”)
Internal hex. driveD4 DIN 3126 (5/32”)
Internal hex. driveD4 DIN 3126 (5/32”)
5
Bits
Sockets with shaft (without and with screw suction)
Semi-finished bits and finders (not hardened) special bits
FOR MICROMAT-SCREWDRIVER
Torx screws
Torx size
T 6T 7T 8T 10
order no.
803926803586803587803589
hex. screws
hex. nuts
AFmm
4.0—5.05.5—
mm in.
8—9
10—
order no.
803960—
803961803962
—
order no.
330633330633330634330634330634
mm in.
7788
9.5
order no.
324587330239324588324589330241
without screw suction with screw suction
socket with shaftspring sleevesocket with shaft
mmd1
in.
5.05.56.66.6
.06
.06
.06—
15/1615/1631/3231/16
order no.490013490014490015490069
mm mm order no.3.63.64.04.0
102130100152
490230490229490228490212
mm mm order no.0.20x1.00.25x1.50.25x2.00.40x4.00.50x4.00.70x4.0
505050909090
324098324099324100339923339924339925
pointsize mm
PHILLIPSorder no.
POZIDRIVorder no.
11101
75 90102152152
328176339921327520348426348430
333917339922337990
—348431
finder
AFin.
5/323/16—7/321/4
mm in.
43—4343—
111/16—
111/16111/16
—
d L
5/16—
23/6425/64—
9/329/325/165/163/8
mm in.
4043404445
19/16111/1619/16123/32125/32
d L
in..14.14.16.16
in.4
51/8315/16
6
d Lin.
.008x.040
.010x.060
.010x.080
.016x.154
.020x.154
.028x.154
in.blade L
131/32131/32131/3239/1639/1639/16
215/1639/16
466
in.in.49/6449/6413/1613/16
mm
19,519,520,520,5
mm
24242578
in.
113/64113/6411/4
321/64
mm
30,530,531,584,5
d2
.12
.15
.19
.19
mm
3.03.94.84.8
mm
1.51.51.5—
in.
.20
.22
.26
.26
L l tDin. in.
bit50 (131/32”)
L
External hex. driveA3 DIN 3126 (.118”)
External hex. driveA3 DIN 3126 (.118”)
External hex. driveA3 DIN 3126 (.118”)
External hex. driveA3 DIN 3126 (.118”)
External hex. driveA3 DIN 3126 (.118”)
External hex. driveA3 DIN 3126 (.118”)
Special bits, finders
Bits, finders
6
FOR MINIMAT-, RECYCLING-, SLIP CLUTCH SCREWDRIVERS
FOR MINIMAT-, SLIP CLUTCH SCREWDRIVERS
mm
3.844.24.34.54.755.666.56.9777.58.28.38.599.29.5
101011
mm
5.55.55.566777
7.58.58.58.58.59.59.510.512
10.51212121213
finder1)
order no.
322575322575322575342338342338342337342346322573342340342344342339342339342339342342342341342345322630342345322630322630322630322630342343
in.
.020 x .122
.020 x .122
.020 x .122
.024 x .134
.024 x .134
.024 x .134
.024 x .177
.032 x .154
.032 x .215
.032 x .154
.038 x .215
.032 x .215
.038 x .215
.038 x .215
.046 x .255
.038 x .215
.046 x .255
.038 x .215
.046 x .312
.046 x .312
.046 x .312
.063 x .312
.063 x .312
bitorder no.
804001804001804001803598803598803598803590803592804012803592803593804012803593803593803872803593804007803593804007804007804007803594803594
mm
6—666
6.5—7
7.5—8.5—8.59
9.5—10—1111121213
finder1)
order no.
325246—
325247325247325248325249
—325133325751
—325250
—325250342258342249
—342248
—325255325256325170325170342260
short executionwithout screw suction
long executionwithout screw suction
mm
0.5 x 3—
0.5 x 30.5 x 30.5 x 30.5 x 3
—0.8 x 40.8 x 4
—1 x 5.5
—1 x 5.51 x 5.5
1.2 x 6.5—
1.2 x 6.5—
1,2 x 81.2 x 81.2 x 81.6 x 81.6 x 8
bitorder no.
804021—804021804021804021804021—803595803595—803596—803596803596803873—803873—804027804027804027803597803597
with screw suction (onlyMINIMAT straight screwdr.size 1 and size 2)
slotted screws
in.
.150
.157
.165
.170
.177
.185
.196
.220
.236
.255
.271
.275
.275
.295
.323
.326
.334
.354
.362
.374
.395
.395
.433
in.
.22
.22
.22
.24
.24
.28
.28
.28
.30
.33
.33
.33
.33
.37
.37
.41
.47
.41
.47
.47
.47
.47
.51
mm
0.5 x 30.5 x 30.5 x 3
0.6 x 3.50.6 x 3.50.6 x 3.50.6 x 4.50.8 x 4
0.8 x 5.50.8 x 41 x 5.5
0.8 x 5.51 x 5.51 x 5.5
1.2 x 6.51 x 5.51.2 x 81 x 5,51.2 x 81.2 x 81.2 x 81.6 x 81.6 x 8
in.
.24—.24.24.24.26—.28.30—.33—.33.35.37—.39—.43.43.47.47.51
in.
.020 x .122—
.020 x .122
.020 x .122
.020 x .122
.020 x .122—
.032 x .154
.032 x .154—
.038 x .215—
.038 x .215
.038 x .215
.046 x .255—
.046 x .255—
.046 x .312
.046 x .312
.046 x .312
.063 x .312
.063 x .312
4 (5/32”)50 (115/16”) 25 (1”)
head dia. d blade d blade
70 (23/4”)
External hex. driveE6.3 DIN 3126 (1/4”)
External hex. driveE6.3 DIN 3126 (1/4”)
in.
.150
.157
.165
.170
.177
.185
.196
.220
.236
.255
.271
.275
.275
.295
.323
.326
.334
.354
.362
.374
.395
.395
.433
101011
mm
——666
6.5—7
7.5—8.5—8.59
9,5—10—11
11,5121213
finder1)
order no.
——
353891353891353892353894
—353897333680
—332770
—332770346365333681
—351811
—331735351813326388326388326389
in.
——
.028 x .134
.028 x .134
.028 x .134
.028 x .134—
.032 x .154
.032 x .187—
.036 x .215—
.036 x .215
.038 x .250
.038 x .275—
.038 x .275—
.046 x .312
.046 x .312
.046 x .312
.046 x .312
.046 x .312
bitorder no.
——
804013804013804013804013
—804014804018
—804015
—804015804019804016
—804016
—804017804017804017804017804017
slotted screws
mm
3.844.24.34.54.755.666.56.9777.58.28.38.599.29.5
in.
——.24.24.24.26—.28.30—.33—.33.35.37—.39—.43.45.47.47.51
dhead dia.mm
——
0.7 x 3.50.7 x 3.50.7 x 3.50.7 x 3.5
—0.8 x 4
0.8 x 4.7—
0.9 x 5.5—
0.9 x 5.51 x 6.31 x 7
—1 x 7
—1.2 x 81.2 x 81.2 x 81.2 x 81.2 x 8
102 (4”)
blade
57 (21/4”)
1) hereto spring sleeve cpl., see leaflet of respective screwdriver Accessories (Optional Equipment)
External hex. driveE6.3 DIN 3126 (1/4”)
7
FOR MINIMAT-, RECYCLING-, SLIP CLUTCH-, PULSE TOOLS-, ELECTRIC SCREWDRIVERS
without screw suction / with screw suction (only MINIMAT straight screwdriver size 1 and size 2)
Bits, finders, bit holders (non-magnetic and magnetic)
mm
66
6.56.577
7.588
8.599910
10.510.510.511
11.511.512.512.513.5
finderorder no.
354698354698354699354699354700354700341388354701334920354702354468354468354703354704354705354706354707354708354709354710354711354711354712
mm
0.5 x 30.5 x 3
0.6 x 3.50.6 x 3.50.6 x 3.50.6 x 3.50.6 x 4.50.8 x 5
0.8 x 5.50.8 x 5.50.8 x 5.50.8 x 5.51.2 x 6.51 x 5.5
1.2 x 6.51 x 5.51.2 x 81 x 5.5
1.2 x 6.51.2 x 81.2 x 81.6 x 81.6 x 8
bitorder no.
820883820883821071/3821071/3821071/3821071/3803841803842803969803969803969803969821072/3821075821072/3821075803846821075821072/3803846803846821076821076
bit holder (non-magnetic)order no.
bit holder (magnetic)order no.
804602 821068
in.
.020 x .122
.020 x .122
.024 x .134
.024 x .134
.024 x .134
.024 x .134
.024 x .177
.032 x .196
.032 x .215
.032 x .215
.032 x .215
.032 x .215
.046 x .255
.038 x .215
.046 x .255
.038 x .215
.046 x .312
.038 x .215
.046 x .255
.046 x .312
.046 x .312
.063 x .312
.063 x .312
in.
.24
.24
.26
.26
.28
.28
.30
.31
.31
.33
.35
.35
.35
.39
.41
.41
.41
.43
.45
.45
.49
.49
.53
d blade
75 (3”)
ø10,
5(13
/32”)57 (21/4”)
ø11
(7 /16”
)25 (1”)
External hex. driveE6.3 DIN 3126 (1/4”)
External hex. driveE6.3 DIN 3126 (1/4”)
External hex. driveC6.3 DIN 3126 (1/4”) Internal hex. drive
D6.3 DIN 3126 (1/4”)Internal hex. driveD6.3 DIN 3126 (1/4”)
mm
———————7
7.5—8.5—8.59
9.5—10—11
11.5121213
finder1)
order no.
———————
353904330731
—353905
—353905330178353906
—326669
—353907353909325518325518353910
mm
———————
0.8 x 40.8 x 4.7
—0.9 x 5.5
—0.9 x 5.51 x 6.31 x 7
—1 x 7
—1.2 x 81.2 x 81.2 x 81.2 x 81.2 x 8
bitorder no.
———————
804034804039
—804035
—804035804033804036
–804036
—804037/1804037/1804037/1804037/1804037/1
finder1)
order no.
———————
343915328972
—353911
—353911353912353913
—332775
—353914353915337006337006353916
mm
———————
0.8 x 40.8 x 4.7
—0.9 x 5.5
—0.9 x 5.51 x 6.31 x 7
—1 x 7
—1.2 x 81.2 x 81.2 x 81.2 x 81.2 x 8
bitorder no.
———————
803979803980
—803981
—803981803982803983
—803983
—803984803984803984803984803984
mm
———————7
7.5—8.5—8.59
9.5—10—11
11.5121213
in.
———————
.032 x .154
.032 x .187—
.036 x .215—
.036 x .215
.038 x .250
.038 x .275—
.038 x .275—
.046 x .312
.046 x .312
.046 x .312
.046 x .312
.046 x .312
in.
———————.28.30—.33—.33.35.37—.39—.43.45.47.47.51
in.
———————.28.30—.33—.33.35.37—.39—.43.45.47.47.51
in.
———————
.032 x .154
.032 x .187—
.036 x .215—
.036 x .215
.038 x .250
.038 x .275—
.038 x .275—
.046 x .312
.046 x .312
.046 x .312
.046 x .312
.046 x .312
82 (31/4”) 127 (5”) 107 (47/32”) 152 (6”)
d blade d blade
1) hereto spring sleeve cpl., see leaflet of respective screwdriver Accessories (Optional Equipment)
External hex. driveE6.3 DIN 3126 (1/4”)
External hex. driveE6.3 DIN 3126 (1/4”)
8
FOR MINIMAT-, RECYCLING-, SLIP CLUTCH-, PULSE TOOLS-, ELECTRIC SCREWDRIVERS
long excecutionwithout screw suction
Bitsshort executionwithout screw suction
FOR MINIMAT-, RECYCLING-, SLIP CLUTCH-, ELECTRIC SCREWDRIVERS
3.83.844.34.755.666.56.977.58.28.399.29.5
PHILLIPSorder no.
804040804041804041804041804041804041804041804041804042804042804042804042804042804042804042804042804042804042804043804043804043804044804044
01111111222222222233344
POZIDRIVorder no.
—803985803985803985803985803985803985803985803986803986803986803986803986803986803986803986803986803986803987803987803987803991803991
PHILLIPSorder no.
804045804046804046804046804046804046804046804046804047804047804047804047804047804047804047804047804047804047804048804048804048 — —
POZIDRIVorder no.
—803988803988803988803988803988803988803988803989803989803989803989803989803989803989803989803989803989803990803990803990 — —
PHILLIPS screws
POZIDRIV screws
mmpoint size in.
10111212.514.516
.150
.150
.157
.170
.185
.196
.220
.236
.255
.271
.275
.295
.323
.326
.354
.362
.374
.395
.433
.472
.492
.573
.630
head dia.
70 (23/4”)50 (115/16”)
External hex. driveE6.3 DIN 3126 (1/4”)
External hex. driveE6.3 DIN 3126 (1/4”)
mm
3.844.34.755.666.56.977.58.28.399.29.5
PHILLIPSorder no.
324963324963324963324963324963324963324963324331324331324331324331324331324331324331324331324331324331
point size
11111112222222222
POZIDRIVorder no.
324686324686324686324686324686324686324686324842324842324842324842324842324842324842324842324842324842
finder1)
order no.
353917353931353933353934353935334181333680
—338337
—346365344104
——
331735351813326388
withoutscrew suction
mm
77777
7.57.5—8.5—910——11
11.512
POZIDRIVorder no.
353922353922353922353922353922324686324686
—324842
—324842324842
——
324842324842324842
PHILLIPSorder no.
353921353921353921353921353921324963324963
—324331
—324331324331
——
324331324331324331
with screw suction (onlyMINIMAT straight screwdriver size 1 and size 2)
10
in.
.150
.157
.170
.185
.196
.220
.236
.255
.271
.275
.295
.323
.326
.354
.362
.374
.395
head dia.in.
.28
.28
.28
.28
.28
.30
.30—.33—.35.39——.43.45.47
103 (4”) 103 (4”)57 (21/4”)
PHILLIPS screws
POZIDRIV screws
d
1) hereto spring sleeve cpl., see leaflet of respective screwdriver Accessories (Optional Equipment)
External hex. driveE6.3 DIN 3126 (1/4”)
External hex. driveE6.3 DIN 3126 (1/4”)
9
FOR MINIMAT-SCREWDRIVERSFOR MINIMAT-, RECYCLING-, SLIP CLUTCH-,PULSE TOOLS-, ELECTRIC SCREWDRIVERS
long execution, with screw suction (onlyMINIMAT straight screwdriver size 1 and size 2)
Bits, finders Bits, bit holders (non-magnetic and magnetic)
mm
6656
6.56.57
7.5—8.5—9
9.5——11111213————
finder1)
order no.
325246325246330742325247325249329280325220325181—325251—325260325253——325255325256325170342260————
PHILLIPSorder no.
804045338894338894338894338894804046804046804046
—804047
—804047804047
——
804047804047804047804048
————
POZIDRIVorder no.
—339140339140339140339140803988803988803988
—803989
—803989803989
——
803989803989803989803990
————
PHILLIPSorder no.
POZIDRIVorder no.
804635804636804636804636804636804636804636804636804637804637804637804637804637804637804637804637804637804637804638804638804638804640804640
804641/3804665804665804665804665804665804665804665804666804666804666804666804666804666804666804666804666804666804667804667804667804674804674
in.
.24
.24
.20
.24
.26
.26
.28
.30—.33—.35.37——.43.43.47.51————
25 (1”)
ø14
(9/16
”)
L
ø11
(7/16
”)
L25 (1”) 70 (23/4”)
dnon-
magneticorder no.
magneticorder no.
821068337722330744335481334086330745
magnetic andquick change
chuckorder no.
75100150204250300
in.
804602804639/1804614/1812944/1
57102152203
821692820150358131
21/32
3531/32
mm
51.576.5
151.5
L
3315/16
529/32
81/32
927/32
1113/16
21/4
468
in.mmL
in.mmL
External hex. driveE6.3 DIN 3126 (1/4”)
External hex. driveE6.3 DIN 3126 (1/4”)
External hex. driveE6.3 DIN 3126(1/4”)
External hex. driveC6.3 DIN 3126 (1/4”) Internal hex. drive
D6.3 DIN 3126 (1/4”)Internal hex. driveD6.3 DIN 3126(1/4”)
POZIDRIVorder no.
330255330255330255330255330255330255330255331003331003331003331003331003331003331003331003331003331003
PHILLIPSorder no.
325567325567325567325567325567325567325567331002331002331002331002331002331002331002331002331002331002
finder1)
order no.
353945353946353947353948353949337383330731
—333555
—330178353950
——
353952353953339264
mm
77777
7.57.5—9.5—9
9.5——11
11.511.5
in.
.28
.28
.28
.28
.28
.30
.30—.37—.35.37——.43.45.45
POZIDRIVorder no.
PHILLIPSorder no.
353944353944353944353944353944325567325567
—331002
—331002331002
——
331002331002331002
339867339867339867339867339867330255330255
—331003
—331003331003
——
331003331003331003
POZIDRIVorder no.
327386327386327386327386327386327386327386330026330026330026330026330026330026330026330026330026330026
PHILLIPSorder no.
327986327986327986327986327986327986327986328551328551328551328551328551328551328551328551328551328551
finder1)
order no.
353955353958353959353960353961337182328972
—332621
—353912353962
——
353963353964326088
mm
77777
7.57.5—9—9
9.5——11
11.512
in.
.28
.28
.28
.28
.28
.30
.30—.35—.35.37——.43.45.47
POZIDRIVorder no.
PHILLIPSorder no.
346327346327346327346327346327327986327986
—328551
—328551328551
——
328551328551328551
withoutscrew suction
with screw suction (onlyMINIMAT straight screwdr. size 1 and size 2)
withoutscrew suction
with screw suction (onlyMINIMAT straight screwdriver size 1 and size 2)
127 (5”) 82 (31/4”) 127 (5”) 152 (6”) 107 (41/4”) 152 (6”)
dd
1) hereto spring sleeve cpl., see leaflet of respective screwdriver Accessories (Optional Equipment)
External hex. driveE6.3 DIN 3126 (1/4”)
External hex. driveE6.3 DIN 3126 (1/4”)
External hex. driveE6.3 DIN 3126 (1/4”)
External hex. driveE6.3 DIN 3126 (1/4”)
340727340727340727340727340727327386327386
—330026
—330026330026
——
330026330026330026
10
Semi-finished finders(not hardened)(not forElectricScrewdrivers)
FOR MINIMAT-, RECYCLING-, SLIP CLUTCH-, ELECTRIC SCREWDRIVERS
Threaded bit tips Bit holder (threaded)
pointsize
1111222
mm
5.566.3555.55.566.356
g
8-3210-32M 4M 48-3210-32M 5
mm
22342525223434
PHILLIPSorder no.
803744/1803747/1803728/1––803745/1803746/1803855
POZIDRIVorder no.
803707/1803748/1––803750/3803729/1803749/1803856
mm
5.65.65.65.65.65.66.356.356.356.356.356.355.55.55.55.55.55.5777777777788888
8-328-328-328-328-328-32
10-3210-3210-3210-3210-3210-32M 4M 4M 4M 4M 4M 4M 5M 5M 5M 5M 5M 5M 5M 5M 5M 5M 6M 6M 6M 6M 6
in.
35/32
41/8
51/8
65/32
65/8
7211/16
321/32
421/32
543/64
65/32
617/32
31/32
41/64
561/32
61/2
657/64
211/16
31/32
35/8
41/64
439/64
555/8
63/32
61/2
611/16
31/32
41/64
563/32
79/32
order no.
337500337499334316353697334420353694337497336707334315341042334421355758337520337521335637354233341765347107348745344689349569344819345466343309357736346886348235348417362258370770371868351713351533
mm
234464
101126
in.
29/32
123/32
11/2
321/32
321/32
order no
490199490031490105490107490108
in.
7/321/4
13/647/327/321/4
15/64
mm in.
7/8
111/32
11
7/8
111/32
111/32
in.
7/327/327/327/327/327/321/41/41/41/41/41/47/327/327/327/327/327/329/329/329/329/329/329/329/329/329/329/325/165/165/165/165/16
dmm
801051301561681786893
11814415616677
102127153165175687792
10211712714315516517077
102127155185
ld l
15375794
119
19/32
115/32
21/4
311/16
411/16
mm in. mm in.
507089
102/127152
115/16
23/4
31/2
4 / 56
L l bit length
ø13
(.511
”)
*) special lengths upon request
T 8T 10T 10T 10T 15T 15T 15T 20T 20T 20T 20T 25T 25T 25T 25T 30T 30T 30T 40
5.565.5665.5665.56765.5676777
M 410-32M 4M 510-32M 4M 510-32M 4M 5M 510-32M 4M 5M 610-32M 5M 6M 5
25342534342534342534253425342534252525
torxorder no.
820235/3822235/3803753823894/3812945/3803754820603/3820297/3803756/3812894/3821042/3820298/3825008/3822106/3821760/3820299/3803706/3821061/3821932/3
l
d g
torxsize mm
gin. mm in.
d l
7/3215/647/3215/6415/647/3215/6415/647/3215/649/3215/647/3215/649/3215/649/329/329/32
1111/32
1111/32
111/32
1111/32
111/32
1111/32
1111/32
1111/32
1111/32
111
External hex. driveE6.3 DIN 3126 (1/4”)
Threaded bit tips
11
Special bits(not hardened)
Adapters Chuck for stud screws
77777778
in.
.275
.275
.275
.275
.275
.275
.275
.315
order no.
490221490222490223490224490225490279490281490319
mmsquaredrive mm
5076
1001522032543053554065076
10015225450
152
order no.
804050803647/1804051803808/1803809/1803810/1803811/1803798/1820766/1804052/1820145/1803807820392/1803805/1804053820035/1
in.
50505050555555
order no.
390287390285390335390288390295390339390338
mm
9999
161616
M 3M 4M 5M 6M 8M 10M 12
stud screws
1/4"1/4"
3/8"
1/2"1/2"
70102127152200260300300
mm in.
23/4456
77/8101/4
1113/161113/16
1/4"1/4"1/4"1/4"1/4"1/4"1/4"
3/8"3/8"3/8"3/8"
in.
23
315/16681012141623
315/1661026
Ld Lin.mm
D L
11/3211/3211/3211/325/85/85/8
2222
23/1623/1623/16
Externalsquare drive
External hex. driveE6.3 DIN 3126 (1/4”)
Externalhex. drive External hex. drive
E6.3 DIN 3126 (1/4”)
12
FOR MINIMAT-, RECYCLING-, SLIP CLUTCH-, PULSE TOOLS-, ELECTRIC SCREWDRIVERS
Bits
L = 152 (6”)order no.
AFmm
Torx-
1.52—2.5—3——4—5—6—8
T 6T 7T 8T 9T 10T 15T 20T 25T 27T 30T 40————
L = 50 (115/16”)order no.
—324814/3803670/1804114803671804115803672803673804116803675804117803676804118803677803678
—327153333277325565—803975——803976—803977—803978—812928/3
allen bit Torx bit
AFin.
—5/643/32
—7/64
—1/89/645/323/16
—7/32
—1/45/16
Torx screwsallen screws,threaded pins
L = 70 (23/4”)order no.
L = 50 (115/16”)order no.
821092803535/1803536803537/1803869/1803538/1803539/1803540/1803541/1803542/1803543/1————
821516803548/1803866/3803549/1803550812914812915812916812917812918803556————
L = 70 (23/4”)order no.
821055/1803560/1803561803562/1803563/1803564/1803565/1803566/1822995/1803568/1803569/1————
L = 89 (31/2”)order no.
823038823520/1803575803576/1803868803577/1803578/1803579/1803580/1803581/1803582/1————
External hex. driveE6.3 DIN 3126 (1/4”)
External hex. driveE6.3 DIN 3126 (1/4”)
13
Bits, bit holders (non-magnetic and magnetic)
allen bitorder no.
Torx bitorder no.
820302804668803682804669—804670803684—804671803687804672803688804673803689803690
803520803521803522803523803524803525803526803527803528803529803530————
non-magneticorder no.
804602804639/1804614/1812944/1
magneticorder no.
821068337722330744335481334086330745
magnetic andquick change chuck
order no.
821692820150358131
mm
75100150204250300
3315/1657/881/1697/8
1113/16
Lin.
Internal hex. driveD6.3 DIN 3126 (1/4”)
L
ø11
(7 /16”
)25 (1”)25 (1”)
ø10,
5 (13
/32”) L
ø14
(9 /16”
)
mm
57102152203
21/4468
Lin. mm
51.576.5
151.5
21/323
531/32
Lin.
External hex. driveE6.3 DIN 3126 (1/4”)
External hex. driveE6.3 DIN 3126 (1/4”)
External hex. driveE6.3 DIN 3126 (1/4”)
External hex. driveC6.3 DIN 3126 (1/4”)
External hex. driveC6.3 DIN 3126 (1/4”)
Internal hex. driveD6.3 DIN 3126 (1/4”)
Internal hex. driveD6.3 DIN 3126 (1/4”)
Sensor sleeves, bits
14
FOR SENSOMAT-, MINIMAT-T-SCREWDRIVERS
counter nut for above with finders (and spring sleeve),without and with screw suction*)
mmsensor sleeves
order no.
1717171717171717171717202020121212
346070346071346072346088346089346090346091346092346093346094346095346096346084346097346098346099346100
PHILLIPSorder no.
338894338894338894804046804046804046804046804047804047804047804047804047804047804047804047804047804047
POZIDRIVorder no.
339140339140339140803988803988803988803988803989803989803989803989803989803989803989803989803989803989
bit
slotted screws(only self tapping screws)
mm
6666.577.588.5999
101010111111,5
3.844.34.755.666.56.977.588.28.399.29.5
*) Screw suction for drilling and self tapping screws not recommendable
PHILLIPS screws(only drilling and self tapping screws)
POZIDRIV screws(only drilling and self tapping screws)
order no.
counter nut339983 (f. SENSOMAT)339983/1 (f. MINIMAT-T)
spring sleeve 401613 A(screwdriver size 1)
spring sleeve 401613 B(screwdriver size 2)
(only for screw suction)
mm
3.844.34.54.755.666.56.9777.588.28.38.59
in.
.150
.157
.170
.177
.185
.196
.220
.236
.255
.271
.275
.275
.295
.315
.323
.326
.334
.354
head dia.
11111112222222222
.150
.157
.170
.185
.196
.220
.236
.255
.271
.275
.295
.315
.323
.326
.354
.362
.374
pointsize mm in. in.
d
.24
.24
.24
.26
.28
.30
.31
.33
.35
.35
.35
.39
.39
.39
.43
.43
.45
in.l
11/1611/1611/1611/1611/1611/1611/1611/1611/1611/1611/1613/1613/1613/1615/3215/3215/32
head dia.
70 (23/4”)
finder339982 (f. SENSOMAT)368013 (f. MINIMAT-T)
External hex. driveE6.3 DIN 3126 (1/4”)
Sensor sleeves, bits
Sensor sleeves, bits, bit holder (magnetic)
15
counter nut for above with finders, without screw suction
counter nut for above with finders, without screw suction
mm mmsensor sleeves
order no. mmbit
order no.counter nutorder no.
finderorder no.
171717171717171717171717172020202012
346070346071346072346073346074346075346076346077346078346079346080346081346082346083346084346085346086346087
0.5 x 30.5 x 30.5 x 30.5 x 30.5 x 30.5 x 30.8 x 40.8 x 40.8 x 41.0 x 5.50.8 x 4.01.0 x 5.51.0 x 5.51.0 x 5.51.2 x 6.51.0 x 5.51.2 x 6.51.0 x 5.5
804021804021804021804021804021804021803595803595803595803596803595803596803596803596803873803596803873803596
339983(f. SENSOMAT)
339983/1(f. MINIMAT-T)
mm mmsensor sleeves
order no.
7777788
101010
77777888888888888
344123344123344123344123344123344124344124343983343983343983344125344125344125344125344126344126344126
counter nutorder no.
finderorder no.
11.511.511.511.512.512.512.5
PHILLIPSorder no.
804636804636804636804636804636804636804636804637804637804637804637804637804637804637804637804637804637
POZIDRIVorder no.
804665804665804665804665804665804665804665804666804666804666804666804666804666804666804666804666804666
bit holder (magnetic)order no.
821068
bit
in.
.28
.28
.28
.28
.28
.31
.31
.39
.39
.39
.45
.45
.45
.45
.49
.49
.49
.28
.28
.28
.28
.28
.31
.31
.31
.31
.31
.31
.31
.31
.31
.31
.31
.31
in.
6666.56.577.588.59999
1010101011
in.
.020 x .122
.020 x .122
.020 x .122
.020 x .122
.020 x .122
.020 x .122
.032 x .154
.032 x .154
.032 x .154
.038 x .215
.032 x .154
.038 x .215
.038 x .215
.038 x .215
.046 x .255
.038 x .215
.046 x .255
.038 x .215
blade
11/1611/1611/1611/1611/1611/1611/1611/1611/1611/1611/16
13/1613/1613/16
15/32
13/16
11/1611/16
.24
.24
.24
.26
.26
.28
.30
.31
.33
.35
.35
.35
.35
.39
.39
.39
.39
.43
in. in.
75 (3”)
70 (23/4”)
d l
d l
ø10,
5 (13
/32”)
25 (1”)
339982(f. SENSOMAT)
368013(f. MINIMAT-T)
343982(f. SENSOMAT)
343982(f. MINIMAT-T)
343981(f. SENSOMAT)
369430(f. MINIMAT-T)
External hex. drive
External hex. driveE6.3 DIN 3126 (1/4”)
External hex. driveC6.3 DIN 3126 (1/4”) Internal hex. drive
D6.3 DIN 3126 (1/4”)
16
In-between sizes with hexagon and sockets with square on request
Sockets with hexagonhex. screwshex. nuts
Socketopening
Øorder no.
———
804171804173804174804175804176804177804178821993804179
——————
804183
O
———5.58.59.59.5
1111111212——————12
FOR RATCHET WRENCH
FOR MINIMAT-, RECYCLING-, SLIP CLUTCH-, PULSE TOOLS, ELECTRIC SCREWDRIVER
AFin.
––7/32––
5/16––––––––––––5/8––––3/4––––
11/16––––
order no.
——
804136804137804138
——————————————
order no.
——
804185804186804187804188
—————————————
order no.
————
804139804140804141804142804143804144821541804145821542804146
———
804147804148
order no.
———————
804154804155
——
804157—
804158804159402717804161804165
—
39-331-19 K 39-331-21 K 39-331-32 K39-331-32 L
39-331-46 KClosed Head
39-331-43 OOpen Head
order no.
401467/8401467/7401467/5401467/4401467/2
——————————————
39-521-19 K
AFmm
55.57810111213141516171819222427
1/2"5/8"
––––––
7/32––––––––––––––––––––––––––––––
55.5678910111213
AFmm
AFin.
10101012131416
15.516.519
25/6425/6425/6415/321/29/165/8
39/6421/323/4
mm
hex. screwshex. nuts
Din.
804126804120804125804121804122804113804123804127803791804124
non-magneticorder no.
804135804130804128804131804132804152804133804129804111804134
magneticorder no.
with screw suction(only MINIMAT straight screwdr. size 1 and size 2)
50 (2")50 (2")
External hex. driveE6.3 DIN 3126 (1/4”)
External hex. driveE6.3 DIN 3126 (1/4”)
—7/32
——
5/16
—————
Dmm in.
8.59.59.510
11.51313———
11/323/83/8
25/6429/321/21/2
———
325363325153325421324914325052335024325053
———
order no.
Sockets with shaft 1/4” hex. drive
hex. screwshex. nuts
Sockets, Holder
AFin––––5/8––––3/4––––––
11/16
mm25253030303030
32.535
38.5
in.19/1619/1611/219/1611/219/1611/219/16149/64131/32
order no.804392804393820293804394820294804395
————
order no.—
804393820293804394820294804395820526804396804397804398
Holder (for socket AF 14)order no.
804245
Socket
External square driveE 12.5 DIN 3121 (1/2”)
External hex. driveAF 14
30
Internal square driveG 12.5 DIN 3121 (1/2”)
AFmm10131617181921222427
in11
13/1613/1613/1613/1613/1619/3213/8
133/64
mm40403840384038404550
D L
39-331-46 KClosed Head
39-331-32 K39-331-32 L
mm in.
55.5678910101112131617181921222427
AFin.
Dnon-
magneticorder no.
L
25232323232323
25.4232323————————
804056804057804058804059804060804061804062
––804063804064804065
————————
magneticorder no.
804086804087804088804089804090804091
––804092/1804093
804094/1804095
————————
D
———19191919—191922
24.525.526.528————
non-magneticorder no.
L
———
804370804371820853804372
—820855820295804373820292804374820311804375
————
magneticorder no.
———
820851820852820854803768
—820856820857820858820859812942820860820711
————
D
————252525—252525253030303233
35.540
non-magneticorder no.
L
————404040—4040404040404040404550
————
804391820862804392
—803766820175804393820293804394820294804395820526804396804397804398
magneticorder no.
————
820861820863820864
—820865820866820244820867812923820541812925820868820869820870820871
Internal square drive G12.5 DIN 3121 (1/2”)
AFmm
—7/32
——
5/16
——––———5/8
——3/4
———
11/16
mm in. mm in. mm in. mm in. mm in. mm in.
1/21/21/21/21/2
17/3219/325/85/8
11/163/4
————————
129/3229/3229/3229/3229/3229/32
129/3229/3229/3229/32
—————––––
———3/43/43/43/4
—3/43/47/8
31/32
113/64
13/32
————
———
111/32
111/32
111/32
111/32
—111/32
111/32
111/32
111/32
111/32
111/32
111/32
————
————111—1111
13/16
13/16
13/16
11/4
15/16
113/32
19/16
————
19/16
19/16
19/16
—19/16
19/16
19/16
19/16
19/16
19/16
19/16
19/16
19/16
125/32
131/32
———34343434—34343434343434————
Internal square drive G10 DIN 3121 (3/8”)Internal square drive G6.3 DIN 3121 (1/4”)
1313131313
13.515
15.916
17.519————————
hex. screwshex. nuts
in.
—5/8——3/4———
11/16—
11/4———
113/16131/32
——
29/16—
261/64—
311/32335/64
—315/16
—421/64417/32
—51/8——
3535353535353537
40.5————————————————————————
484848484848485050————————————————————————
803885820527803886820528803887820529803888803889803890
————————————————————————
short execution, non-magnetic
Internal square driveG 16 DIN 3121 (5/8")
hex. screwshex. nuts
Please order locking pin and rubber ring extra
——44444444444444464951546066——————————————————
——50505050505050545355585858——————————————————
Internal square driveH 20 DIN 3121 (3/4")
————————545454545763
69.574.581
87.5———————————————
————————60636262626670708585———————————————
————————
804430804431804432820533804433804434804435804436804437804438
———————————————
Internal square driveH 25 DIN 3121 (1")
——————————————8686879399106112118125131137143150156160————
——————————————8484909095100105110110115120125130135128————
——————————————
804450804451804452804453804454804455804456804457804458804459804460804461804462804463825633
————
Internal square driveH 40 DIN 3121 (11/2")
—————————————————————————
150156162169175188207218
mm
—————————————————————————
140147147150152160170177
—————————————————————————
804480804481804482804483804484804485804486804487
Internal square driveH 63 DIN 3121 (21/2")
orderno.
——
804410820530804411820531804412804413804414804415804416820532804417804418804419
——————————————————
orderno.
orderno.
orderno.
orderno.mm
13161718192122242730323436414650556065707580859095100105110115120130145155
AFin.mm
D
13/813/813/813/813/813/813/8
129/64119/32
————————————————————————
in.mmL
157/64157/64157/64157/64157/64157/64157/64131/32131/32
————————————————————————
in.mmD
——
147/64147/64147/64147/64147/64147/64147/64113/16115/1621/6421/8
223/64239/64
——————————————————
in.mmL
——
131/32131/32131/32131/32131/32131/32131/3221/823/32211/6429/3229/3229/32
——————————————————
in.mmD
————————
21/821/821/821/821/4
231/64247/64215/1633/1637/16
———————————————
in.mmL
————————
223/64231/6427/1627/1627/16219/3223/423/4
311/32311/32
———————————————
in.mmD
——————————————
325/64325/64327/64321/32357/64411/64413/32441/64459/6455/32525/6455/8
529/3269/64619/64
————
in.mmL
——————————————
35/1635/16335/64335/64347/64315/1649/64421/64421/64417/32423/32459/6451/855/1653/64
————
in.mmD
—————————————————————————
529/3269/6463/8
621/32657/64713/3285/32837/64
—————————————————————————
533/64525/32525/32529/32563/64619/64611/16631/32
Lin.
Sockets with female square drive
17
short execution, non-magnetic and magnetic
FOR MINIMAT-, RECYCLING, SLIP CLUTCH-, PULSE TOOLS, ELECTRIC SCREWDRIVER,IMPACT WRENCHES, EC-SERVO-SCREWDRIVER
18
D
L
Sockets with internal square drive DIN 3121
FOR MINIMAT-, RECYCLING, SLIP CLUTCH-, PULSE TOOLS, ELECTRIC SCREWDRIVER,IMPACT WRENCHES, EC-SERVO-SCREWDRIVER
Extensions with internal square drive DIN 3121
AFmm
AFin.
Dorder no.
long execution, non-magnetic
789101112131617181921222427
1313
14.51616
17.519————————
45454545454545————————
803767/1803759/1820446/1803760/1820785/1820101/1812931/1
————————
—191919191922
24.525.526.528————
—820872820873820874820875820876820877820878820879820880820881
————
—25—25——253030303030
32.535
38.5
—85—85——858085808080858585
—804400
—804401
——
804402820534804403820535804404820536804405804406804407
—5/16
—
—
—
—
—5/8
—
—3/4
—
—
—
11/16
1/21/29/165/85/8
11/163/4
————————
13/4
13/4
13/4
13/4
13/4
13/4
13/4————————
—3/43/43/43/43/47/8
31/32
113/64
13/32
————
—2222222222————
—1—1——1
13/16
13/16
13/16
13/16
13/16
19/32
13/8
133/64
—51515151515151515151————
Lmm in.mm in.
Dorder no.
Lmm in.mm in.
Dorder no.
Lmm in.mm in.
—311/32
—311/32
——
311/32
35/32
311/32
35/32
35/32
35/32
311/32
311/32
311/32
Internal square drive G12.5 DIN 3121 (1/2”)Internal square drive G10 DIN 3121 (3/8”)Internal square drive G6.3 DIN 3121 (1/4”)
orderno
803891—
803892—
803893803894803895
———————————————————
long execution, non-magnetic
Internal square driveG 16 DIN 3121 (5/8")
hex. screwshex. nuts
44—4444444444464951546067—————————————
100—
100100100100100100100100100100100—————————————
804420—
804421820537804422804423804424804425804426820538804427804428804429
—————————————
Internal square driveH 20 DIN 3121 (3/4")
—————54545454545763
69.574.581
87.5——————————
—————
110110110110108108108110115115115——————————
—————
820067804440804441804442820539804443804444804445804446804447804448
——————————
Internal square driveH 25 DIN 3121 (1")
————————————8686879399106112118125131137143150156
————————————
130140140140150150160170170180180190200200
————————————
804465804466804467804468804469804470804471804472804473804474804475804476804477804478
Internal square driveH 40 DIN 3121 (11/2")
Please order locking pin and rubber ring extra
AFmm
1718192122242730323436414650556065707580859095100105110
——3/4
———
11/16
—11/4
———
113/16
131/32
——
29/16
—261/64
—311/32
335/64
—315/16
—421/64
mm
35—35—3537
40.5———————————————————
mm
90—90—909090———————————————————
in. in.D L
mm mmin. in.D L order
no mm mmin. in.L order
noD
mm mmin. in.L order
noDAF
in.
13/8
—13/8
—13/8
129/64
119/32
———————————————————
335/64
—335/64
—335/64
335/64
335/64
———————————————————
315/16
—315/16
315/16
315/16
315/16
315/16
315/16
315/16
315/16
315/16
315/16
315/16
—————————————
—————
421/64
421/64
421/64
421/64
41/4
41/4
41/4
421/64
417/32
417/32
417/32
——————————
—————21/8
21/8
21/8
21/8
21/8
21/4
231/64
247/64
215/16
33/16
37/16
——————————
————————————
325/64
325/64
327/64
321/32
357/64
411/64
413/32
441/64
459/64
55/32
525/64
55/8
529/32
69/64
————————————51/8
533/64
533/64
533/64
529/32
529/32
619/64
611/16
611/16
73/32
73/32
731/64
77/8
77/8
147/64
—147/64
147/64
147/64
147/64
147/64
113/16
115/16
21/64
21/8
223/64
241/64
—————————————
hex. screwshex. nuts
mm191919—
mm75150300—
orderno.
804490804491804492
—
internal-�external-�
G 10 DIN 3121 (3/8”)E 10 DIN 3121 (3/8”)
G 12.5 DIN 3121 (1/2”)E 12.5 DIN 3121 (1/2”)
H 20 DIN 3121 (3/4”)F 20 DIN 3121 (3/4”)
H 25 DIN 3121 (1”)F 25 DIN 3121 (1”)
H 40 DIN 3121 (11/2”)F 40 DIN 3121 (11/2”)
Please order locking pin and rubber ring extra
in. in.3/43/43/4—
261/64529/321113/16
—
D Lmm252525—
mm75125250—
orderno.
804493804494804495
—
in. in.63/6463/6463/64—
261/64459/64927/32—
D Lmm—444444
mm—175250330
orderno.—
804497804498804499
in. in.—
147/64147/64147/64
—657/64927/32
13
D Lmm54545454
mm100175250330
orderno.
804500804501804502804503
in. in.21/821/821/821/8
315/16657/64927/32
13
D Lmm8686——
mm250380——
orderno.
804505804506
——
in. in.325/64325/64
——
927/321431/32
——
D L
19
D
L
d
max 35°
d
L
D
Chuck for stud screws with internal square drive DIN 3121
FOR IMPACT WRENCHES, PULSE TOOLS, EC-SERVO SCREWDRIVER
Ball joint with internal square drive DIN 3121
Please order locking pin and rubber ring extra
Dmmin.
165/8
dmmin.
165/8
L = 43 mmorder no.
804518 2255/64
2255/64
L = 58 mmorder no.
804510 2817/64
2817/64
L = 78 mmorder no.
804511 3811/2
3811/2
L = 95 mmorder no.
804512 5323/32
5323/32
L = 128 mmorder no.
804513
internal-�external-�
G 6.3 DIN 3121 (1/4”)E 6.3 DIN 3121 (1/4”)
G 12.5 DIN 3121 (1/2”)E 12.5 DIN 3121 (1/2”)
H 20 DIN 3121 (3/4”)F 20 DIN 3121 (3/4”)
H 25 DIN 3121 (1”)F 25 DIN 3121 (1”)
86325/64
86325/64
L = 178 mmorder no.
804514
H 40 DIN 3121 (11/2”)F 40 DIN 3121 (11/2”)
G 10 DIN 3121 (3/8”)E 10 DIN 3121 (3/8”)D
mmin.
dmmin.
Dmmin.
dmmin.
Dmmin.
dmmin.
Dmmin.
dmmin.
Dmmin.
dmmin.
orderno.mm mm mm
M 4M 5M 6M 8M 10M 12M 14M 16M 18M 20M 22M 24M 27M 30M 33
stud screws
Internal square driveG 10 DIN 3121 (3/8”)
Internal square driveG 12.5 DIN 3121 (1/2”)
Internal square driveH 20 DIN 3121 (3/4”)
Internal square driveH 25 DIN 3121 (1”)
3535353535——————————
2222222222——————————
6565656565——————————
790025 A790025 B790025 C790025 D790025 E
——————————
Please order locking pin and rubber ring extra
13/813/813/813/813/8——————————
55/6455/6455/6455/6455/64——————————
29/1629/1629/1629/1629/16——————————
D d Lin. in. in.
orderno.mm mm mm
———4747474747———————
———2828282828———————
———7984848484———————
———
390203 A390203 B390203 C390203 D390203 E
———————
———
127/32127/32127/32127/32127/32———————
———
17/6417/6417/6417/6417/64———————
———
37/6435/1635/1635/1635/16———————
D d Lin. in. in.
orderno.mm mm mm
——————606060606060———
——————414141414141———
——————959595959595———
——————
390135/1 A390135/1 B390135/1 C390135/1 D390135/1 E390135/1 F
———
——————
223/64223/64223/64223/64223/64223/64———
——————
139/64139/64139/64139/64139/64139/64———
——————
347/64347/64347/64347/64347/64347/64———
D d Lin. in. in.
orderno.mm mm mm
—————————666666666666
—————————545454545454
—————————131131131131131131
—————————
390168 A390168 B390168 C390168 D390168 E390168 F
—————————
219/32219/32219/32219/32219/32219/32
—————————21/821/821/821/821/821/8
—————————
55/3255/3255/3255/3255/3255/32
D d Lin. in. in.
Threadsize
AFin.
L = 35 mm= 13/8 in.order no.
1/8
—————5/16
————————3/43/4
——
11/16
——
804525804526804527804528804528820046804529804530804530804531804531804532804532820215820215
———————
order no.
804520804521804522804519
804523/1804524
Bits
external hex. drive
internalhex. screws
L = 40 mm= 137/64 in.order no.
—————––—
804533804533804534804534804535804535804536804536
———————
L = 50 mm= 131/32 in.order no. mm
—————––—————————
804537804537804541804542804619804574804618
internalsquare drive
DIN 3121
G 10 (3/8”)G 12.5 (1/2”)H 20 (3/4”)H 20 (3/4”)H 25 (1”)H 25 (1”)
internalhex. drive
7/16” (11.1 mm)7/16” (11.1 mm)5/8” (15.9 mm)7/8” (22 mm)
5/8” (15.9 mm)7/8” (22 mm)
223044445454
323852606870
5/8” 7/8”7/16”
Please order locking pin and rubber ring extra
L
external hex. drive
Holder
D
L
internal square driveinternal hex. drive
threaded pinswith internal hex.
AFmm3456678101012121414171719192224273236
D Lin. in.
55/6413/16147/64147/6421/821/8
55/6413/16147/64147/6421/821/8
11/411/223/64223/64243/6423/4
mm
Tech
nica
l alte
ratio
ns re
serv
ed -
Fri
for sockets, holder, extensions, ball joints and chucks for stud screws
for bitwith external hex. drive C 6.3 DIN 3126 (1/4”)
Lmm / in.
non-magneticorder no.
65 / 29/16 825021
External square drive Lmm / in.
order no.
E 10 DIN 3121 (3/8”)E 12.5 DIN 3121 (1/2”)F 20 DIN 3121 (3/4”)
50 / 131/3254 / 21/876 / 3
804365/1804366/1804363/1
for sockets
L
External hex. driveE11.2 DIN 3126 (7/16”)
External hex. driveE11.2 DIN 3126(7/16”)
Internal hex. driveD6.3 DIN 3126(1/4”)
L
Dmm / in
11.1 / 7/16
FOR IMPACT WRENCHES, PULSE TOOLS, EC-SERVO SCREWDRIVER
Holder
Locking pins and rubber rings
FOR IMPACT WRENCHES WITH QUICK CHANGE CHUCK (INTERNAL HEX. DRIVE DIN 3126 F11.2)
Bits
D
G 10 (3/8”)G 12.5 (1/2”)G 12 .5 (1/2”)G 16 (5/8”)H 20 (3/4”)H 25 (1”)H 40 (11/2”)H 40 (11/2”)H 63 (21/2”)
Internalsquare driveDIN 3121
Sockets ExtensionBall jointHolder
Chuck forstud screws
AFmm mm
Rubber ring
7-198-1316-278-2717-4627-6046-9095-110100-155
19/2225
28/3035
38/445486——
22—28—4154———
Locking pin
l
d Dd
order no.
802513803370802499802524802546802547802548802468802468
mm in.
14182024344272114114
1/81/85/325/327/3219/6417/6427/6427/64
9/32-3/45/16-33/645/8-11/165/16-11/16
43/64-113/1611/16-223/64113/16-335/64347/64-421/64315/16-67/64
3/4 / 55/64 63/64
17/64 / 13/1613/8
11/2 / 147/6421/8
325/64——
55/64—
17/64—
139/6421/8———
D dmm
3344
5.57.56.510.510.5
35/6445/6425/3215/16111/32121/32253/64431/64431/64
in.order no.
800078802348800012802346800056804546804547804549804548
mm in.
2.533345568
5/825/3215/1617/64117/64149/64261/64421/64417/32
d lmm
16202428324575110115
3/321/81/81/85/32
13/6413/641/45/16
in.AFin. in in.
D dmm
AFin.
——
5/16—————
Internalhex. screws
Threaded pinswith internal hex. drive
order no.
804515804516804538804539804539804540804540804517
55
External hex. drive E11.2 DIN 3126 (7/16”)
AFmm
5681010121214
C E R T I F I E D A S P E R D I N E N I S O 9 0 0 1
DEPRAG SCHULZ GMBH u. CO.P.O. Box 1352, D-92203 Amberg, GermanyKurfürstenring 12–18, D-92224 AmbergPhone (0 96 21) 371-0, Fax (0 96 21) [email protected]