Asia Textile InspectionsQuality And Audit Inspection In China

We Offer Several Inspection Categories In China Such As:

• Container Loading Supervision (CLS)

• Factory & Social Audit FA & SA

• During Production Inspection (DUPRO)

• Initial Production Inspection. (IPI)

• Final Random Inspection (FRI)

• Pre-Production Inspection. (PPI)

http://asiatextileinspections.com

Container Loading Supervision (CLS):

CLS Takes Place When 100% Goods Are Packed And Quality Is Approved. It IsConducted To Ensure That The Empty Container Is In Good Condition And EntireQuantity Is Loaded According To Packing List.

http://asiatextileinspections.com

Factory & Social Audit FA & SA:

Through Factory Audits, Clients Can Assure That Factory Has Enough Capability ToInsure Timely Delivery And Better Quality. While Social Audits Insure ProductionFacility Is Following All Social Requirements For Better Environment And Safety OfSociety.

http://asiatextileinspections.com

During Production Inspection (DUPRO):

DUPRO Takes Place When Approximately 30 To 50% Production Is Completed, Re-ensuring That Initial Discrepancies Have Been Rectified And A Check On TheAverage Quality Of Production Runs. The Main Benefit Of This Inspection Is That ItAllows Another Chance To Apply Corrective Actions Where Necessary.

http://asiatextileinspections.com

Initial Production Inspection (IPI):

IPI Takes Place When Approximately 10-20 % Of Total Ordered Quantity Is Produced.Production Status Is Verified At This Stage. Performing An IPI Is A PreventativeSteps After That Client Has Sufficient Time To Make Decisions About ProductionComponents, Product Quality And Apply Corrective Actions Where Required.

http://asiatextileinspections.com

Final Random Inspection (FRI):

FRI Is To Evaluate The Problems Against 100% Finished & Packed Goods. FRI Is VeryUseful Standard Quality Assurance Check Prior To Shipment. For Evaluation Of FinalProducts To Be Shipped, FRI Is Conducted For Appearance, Quantity, Quality, Size,Specification, Colour And Packing Method/Details. After FRI Client Has Very ClearPicture For His In Coming Products.

http://asiatextileinspections.com

Pre-Production Inspection (PPI):

PPI Takes Place Before Start Of Bulk Production. PPI Can Assure Client About RawMaterial’s Verification & Status. After PPI, Client Is Sure That Supplier HasRight/Adequate Raw Material For Quality Product.

http://asiatextileinspections.com

NORTH AMERICA SALES OFFICE15573 Marine Drive, White Rock, V4B 1C9British Columbia, Canada

Tel: +1-604-960-2399Fax: +1-604-648-8449Email: ati-northamerica@hotmail.comWeb-site: www.asiatextileinspections.com