inspectrum vs the doorbell
TRANSCRIPT
Cyberspectrum Melbourne - Inspectrum - brief version(Tres Acton 31st March 2016)
Installing the tools used
To install the version of Inspectrum used in this demonstration:
git clone https://github.com/miek/inspectrum.gitgit checkout waveform # this switches you to the branch ‘waveform’ to access the betafeatures demonstrated
Once you’ve run the two commands above, follow the official installation instructions foryour OS (Mac or Linux): https://github.com/miek/inspectrum
After it is installed, you can run this tool by typing ‘inspectrum’ in a terminal session.
The tool that was used to capture the transmissions (that are later opened in Inspectrum)is called osmocomm_fft. Installation instructions can be foundat: http://sdr.osmocom.org/trac/wiki/GrOsmoSDR
Once installed, you can run osmocom by typing ‘osmocom_fft’ in a terminal session