install guide...

NOTICEThe manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. This guide has been written for properly trained technicians; a certain level of skill & knowledge is therefore assumed. Please review the Installation Guide carefully before beginning any work.

REvIsION DaTE20120913

DOCumENT NumbER

INsTall guIDEADS-SW(SI)-ALL01-AS-IG-EN

haRDwaREADS-MSW

fIRmwaREADS-SW(SI)-ALL01-AS-EN

www.maestro.idatalink.comAutomotive Data Solutions Inc. © 2012

9729

01RANGEHOLD

OFF

VHz

Hz

Hz

Hz

~ ~

~

VmV Ω

Ω

)))))

mA

A

MIN MAX

400mA

10A COMFUSED

V!

600V CAT IV1000V CAT III

VDC

02

03

04

05

0612+ 12+ LR+ LR+ SWI-3 SWI-3

G- G- LR- LR- SWI-4 SWI-4

Acc+ Acc+ RR+ RR+ SWI F SWI F

Illum+ Illum+ RR- RR- SWI F SWI F

LF+ LF+ AMP+ AMP+ SWI F SWI F

LF- LF- ANT+ ANT+ SWI F SWI F

RF+ RF+ SWI-1 SWI-1 SWI F SWI F

RF- RF- SWI-2 SWI-2 SWI F SWI F

Multimeter

Soldering iron and solder

Wire cutter

Wire stripper

Electrical tape

Wire labels

suggEsTED TOOls - 1 Of 1


ADS-SW(SI)-ALL01-AS-IG-ENPagE 2 Of 8

• 20120913DOC.: #9729

4

5

2

6

7

1

3

A

USB

C1

2

3

4

B

VEHICLE

WEB

01 PURPLE/RED - SWI CIRCUIT 1 INPUT02 PURPLE/YELLOW - SWI CIRCUIT 1 OUTPUT/ANALOG 1 INPUT03 PINK/RED - SWI CIRCUIT 2 INPUT04 PINK/YELLOW - SWI CIRCUIT 2 OUTPUT/ANALOG 2 INPUT05 BLACK/WHITE - SWI GROUND FEED (-) OUTPUT06 RED - ACCESSORY POWER +12V INPUT07 BLACK - GROUND

C

LED

PROGRAMMINGBUTTON USB

A

B

MODULEBACK VIEW

01 BLUE/YELLOW - RADIO CONTROL 1 OUTPUT02 RED

04 WHITE03 BLACK

AFTERMARKET RADIO

RADIO CONTROL 2 OUTPUT

WEBLINK UPDATER CABLE (NOT INCLUDED)

INSTALLATION OVERVIEW - 1 OF 1



• 20120913DOC.: #9729

01

>>

02

654321

712V6

03

654321

77

04

654321

7

SWI-11

05

654321

7SWI-F

5

06

654321

7

SWI-23

07

654321

7

SWI-F5

>>

>>

08

mODulE INsTallaTION PROCEDuRE - 1 Of 1

Refer to WIRE CHART and locate wires.

WARNING: Do not connect module PURPLE/YELLOW wire (Connector A, Pin 2) nor PINK/YELLOW wire (Connector A, Pin 4).

Connect module RED wire (Connector A, Pin 6) to 12V accessory.

Connect module BLACK wire (Connector A, Pin 7) to ground.

Connect module PURPLE/RED wire (Connec-tor A, Pin 1) to SWI-1 wire.

Connect module BLACK/WHITE wire (Connec-tor A, Pin 5) to SWI-F wire. (Disregard this step if no SWI-F wire is found).

If SWI-2 wire exists, connect module PINK/RED wire (Connector A, Pin 3) to SWI-2 wire.

If another SWI-F wire exists, connect module BLACK/WHITE wire (Connector A, Pin 5) to SWI-F wire.

NOTE: If installing a Kenwood radio, connect module BLUE/YELLOW wire (Connector C, Pin 1) to remote input (radio BLUE/YELLOW wire).

NOTE: If installing an Aftermarket radio, con-nect module 3.5mm (1/8”) audio jack (Connec-tor C, Pin 2, 3 & 4) to auxiliary input.

Module installation procedure completed.



• 20120913DOC.: #9729

SELECT

RaDIO bRaND [Y]

Alpine [4]

Blaupunkt [7]

Clarion [6]

JVC 2000-2009 [8]

JVC 2010-2013 [3]

JVC w/o preset [9]

Kenwood [1]

Pioneer [2]

Pioneer w/o preset [10]

Sony [5]

ALPINE

RaDIO fuNCTION [Z]

Power [1]

Volume Up [2]

Volume Down [3]

Track Up [4]

Track Down [5]

Source [6]

Mute [7]

Play/Pause [8]

Band [9]

Preset Up [10]

Preset Down [11]

Enter [12]

Display Info [13]

Answer Call [14]

Hang Up [15]

Menu [16]

Sound [17]

KENWOOD

RaDIO fuNCTION [Z]

Volume Up [1]

Volume Down [2]

Track Up [3]

Track Down [4]

Source [5]

Mute [6]

Play/Pause [7]

Folder Up/AM [8]

Folder Down/FM [9]

Up/Disk Up [10]

Down/Disk Down [11]

Direct [12]

Phone [13]

Repeat [14]

Sound [15]

CLARION

RaDIO fuNCTION [Z]

Volume Up [1]

Volume Down [2]

Preset Up [3]

Preset Down [4]

Source Power [5]

Mute [6]

Play/Pause [7]

Band [8]

Phone [9]

Menu [10]

Sound [11]

Answer [12]

Hang Up [13]

JVC 2010-2013

RaDIO fuNCTION [Z]

Volume Up [1]

Volume Down [2]

Power [3]

Seek Up [4]

Seek Down [5]

Source [6]

Mute [7]

Preset Up [8]

Preset down [9]

Enter [10]

Answer [11]

Hang Up [12]

Voice [13]

PIONEER W/O PRESET

RaDIO fuNCTION [Z]

Volume Up [1]

Volume Down [2]

Seek Up [3]

Seek Down [4]

Source [5]

Mute [6]

Band [7]

Display Info [8]

Phone Menu [9]

Answer Call [10]

Hang Up [11]

BLAUPUNKT

RaDIO fuNCTION [Z]

Power [1]

Volume Up [2]

Volume Down [3]

Seek Up [4]

Seek Down [5]

Track Up [6]

Track Down [7]

Source [8]

Mute [9]

Play/Pause [10]

Display Info [11]

Answer [12]

Hang Up [13]

Menu [14]

Random [15]

Repeat [16]

PIONEER

RaDIO fuNCTION [Z]

Volume Up [1]

Volume Down [2]

Seek Up [3]

Seek Down [4]

Source [5]

Mute [6]

Band [7]

Preset Up [8]

Preset Down [9]

Display Info [10]

Phone Menu [11]

Answer Call [12]

Hang Up [13]

Voice Recognition [14]

JVC 2000-2009

RaDIO fuNCTION [Z]

Volume Up [1]

Volume Down [2]

Power [3]

Seek Up [4]

Seek Down [5]

Source [6]

Mute [7]

Preset Up [8]

Preset Down [9]

Enter [10]

Answer [11]

Hang Up [12]

Voice Dial [13]

SONY

RaDIO fuNCTION [Z]

Power [1]

Volume Up [2]

Volume Down [3]

Seek Up [4]

Seek Down [5]

Source [6]

Display Info [7]

Mute [8]

Band [9]

Sound [10]

JVC W/O PRESET

RaDIO fuNCTION [Z]

Volume Up [1]

Volume Down [2]

Power [3]

Seek Up [4]

Seek Down [5]

Source [6]

Mute [7]

Enter [8]

Answer [9]

Hang Up [10]

Voice Dial [11]

SELECT

vEhIClE bRaND [X]

Acura [1]

Ford [1]

GM* At Bcm [4]

GM* Import [3]

GM* Wire At Radio [2]

Honda [1]

Hyundai [2]

Infi niti [1]

Kia [2]

Lexus [1]

Lincoln [1]

Mazda [1]

Mercury [1]

Mitsubishi [2]

Nissan [1]

Scion [1]

Subaru [1]

Suzuki [1]

Toyota [1]

*Buick, Cadillac, Chevro-let, GMC, Hummer, Isuzu, Oldsmobile, Pontiac, Saab, Saturn

fuNCTION PaIRINg ChaRT - 1 Of 1



• 20120913DOC.: #9729

>>

01OFF

ACC ONSTART

02

>>

03

04[X]

05[X]

06[X]

>>

07

>>

08

09

10[Y]

11[Y]

12[Y]

13

14

NOTE: [X], [Y] & [Z] are numerical variables identifi ed in the FUNCTION PAIRING CHART.

Turn key to ON position.

LED will turn solid GREEN.

NOTE: If LED fl ashes GREEN once [1x], the module is already programmed. To repro-gram the module, reset module and repeat programming procedure.

Refer to FUNCTION PAIRING CHART.

Find the number associated to the vehicle make: [X].

Press programming button [X] times.

LED will fl ash [X] times.

EXAMPLE: If the vehicle make number is 3, the programming button must be pressed 3 times and the LED will fl ash 3 times.

Press and hold programming button until LED turns solid RED to register selection.

NOTE: To go back to function 1, press pro-gramming button repeatedly until function 1 is reached.

Wait, LED will fl ash GREEN 1 time.


Find the number associated to the radio brand: [Y].

Press programming button [Y] times.

LED will fl ash [Y] times.

Press programming button until LED turns solid RED to register selection.


fuNCTION PaIRINg PROCEDuRE - 1 Of 2



• 20120913DOC.: #9729

15[Z]

>>

_________________________________

16

>>

17

>>

_________________________________

18

>>

>>

19

20OFF

ACC ONSTART

21OFF

ACC ONSTART

22OFF

ACC ONSTART

23OFF

ACC ONSTART

24

>>

LED will fl ash GREEN [Z] times to match the function [Z].

EXAMPLE: If LED fl ashes 3 times, the cor-responding function is 3.

Choose a steering wheel button to pair with its corresponding function.

EXAMPLE: The steering wheel “Volume Up” button must be paired with the “Volume Up” function.

Press and hold that steering wheel button un-til LED turns solid GREEN to pair the function.

NOTE: Press programming button once [1x] to skip a function.

Repeat steps 16 and 17 for every other steering wheel button and its corresponding function.

NOTE: LED will fl ash RED once [1x] for func-tion 10.

NOTE: LED will fl ash RED once [1x] then will fl ash GREEN once [1x] for function 11.

Press and hold programming button until LED turns solid GREEN. LED will remain solid green.

Turn key to OFF position.

Remove key. LED will turn OFF.

Insert key into ignition.

Turn key to ON position. LED will remain OFF.

Function pairing procedure completed.

NOTE: Test every steering wheel button, one by one, to verify aftermarket radio control.

fuNCTION PaIRINg PROCEDuRE - 2 Of 2



• 20120913DOC.: #9729

1OFF

ACC ONSTART

2 OFFACC ON

START

3

4

5

6OFF

ACC ONSTART

7

mODulE REsET PROCEDuRE - 1 Of 1


Press and hold programming button and turn key to ON position.

Wait, LED will fl ash RED rapidly. (This may take up to 10 seconds.)

Release programming button.

Wait, LED will turn solid GREEN for 2 seconds.


Module reset procedure completed.



• 20120913DOC.: #9729

install guide...

Documents