install guide com ch rs ch8 ads ch7 en -...
TRANSCRIPT
REVISION DATE20160418
DOCUMENT NUMBER
NOTICE The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be in-stalled by a certified technician. Please review the Installation Guide carefully before beginning any work.
BEFORE INSTALLATION1- Connect module to computer2- Login to Weblink account3- Flash firmware to module (module is not preloaded with firmware)4- Use accessories accordingly (accessories are sold separately)
U.S. Patent No. 8,856,780
INSTALL GUIDECOM-CH(RS)-CH8-[ADS-CH7]-EN
HARDWAREADS-CH7
ACCESSORIESADS-USB (REQUIRED)
COMPATIBLE RF-KIT (OPTIONAL) DRONE MOBILE DR-2000 (OPTIONAL)
FIRMWARECOM-CH(RS)-CH8-[ADS-CH7]
www.idatastart.comAutomotive Data Solutions Inc. © 2016
28340
U.S. Patent No. 8,856,780
VEHICLE LIST - 1 OF 1M
AK
E
MO
DEL
YEA
R
INST
ALL
TYP
E
FEATURES
DAT
A IM
MO
BIL
IZER
BYP
ASS
3X L
OC
K S
TAR
T/ST
AN
DA
LON
E M
OD
.
DO
OR
LO
CK
DO
OR
UN
LOC
K
AR
M O
EM A
LAR
M
DIS
AR
M O
EM A
LAR
M
TRU
NK
/HAT
CH
REL
EASE
DO
OR
STA
TUS
OU
TPU
T
TRU
NK
STA
TUS
OU
TPU
T
BR
AK
E P
EDA
L ST
ATU
S O
UTP
UT
TAC
HO
MET
ER O
UTP
UT
SEC
UR
E TA
KEO
VER
GLO
W P
LUG
S ST
ATU
S
RA
P S
HU
TDO
WN
CTR
L
DO
DG
E
Dart STD key (Tip-Start) AT 13-16 1 • • • • • • • • • • • •
RA
M
1500 STD key (Tip-Start) AT 13-16 2 • • • • • • • • • • •
1500 Diesel STD key (Tip-Start) AT 14-16 2 • • • • • • • • • • • •
2500 / 3500 STD key (Tip-Start) AT 13-16 2 • • • • • • • • • • •
2500 / 3500 Diesel STD key (Tip-Start) AT 14-16 2 • • • • • • • • • • • •
NOTE
I WARNING: All vehicle doors must be closed and locked prior to remote start sequence.
www.idatastart.comAutomotive Data Solutions Inc. © 2016 COM-CH(RS)-CH8-[ADS-CH7]-EN
PAGE 2 OF 20• 20160418DOC.: #28340
U.S. Patent No. 8,856,780
BOX CONTENTS - 1 OF 1
VS2VS2
VS1VS1MS1MS1
MS2MS2
364
12
5
C
B
A
F
G
E
D
79
3
108
111314
12
1517181920
16
64
12
5
79
3
108
1112
64
12
5
21
3
79
3
10864
1 2
5
21
34
21
34
BOX CONTENTS
T-HARNESS 1
AFTERMARKET HOOD SWITCH AND CABLE
WARNING STICKER
10 PIN CONNECTOR
12 PIN CONNECTOR
BLUE
PROGRAMMINGBUTTON
LED 2
LED 1
MODULE
BLACK
BLACK
BLACKRF PORT/WEBLINK PORT
BLACK
BLUETELEMATICPORT
WHITE
WEBLINK CABLE (required accessory sold separately)
WEBLINK CABLE
COMPUTERUSB PORT
4 PIN BLACK CABLE
MODULE WEBLINK PORT
www.idatastart.comAutomotive Data Solutions Inc. © 2016 COM-CH(RS)-CH8-[ADS-CH7]-EN
PAGE 3 OF 20• 20160418DOC.: #28340
U.S. Patent No. 8,856,780www.idatastart.comAutomotive Data Solutions Inc. © 2016 COM-CH(RS)-CH8-[ADS-CH7]-EN
PAGE 4 OF 20• 20160418
COMPATIBLE ACCESSORIES - 1 OF 1
RF KIT
RF KIT (Visit our website to see if this accessory is included with your product)
ANTENNA
FLASH RF DECODERBEFORE INSTALLATION
RF DECODERBLUE CABLE BLACK CABLE
(NC) RED(NC) BLACK
BLACK
BLUEMODULERF PORT
MODULETELEMATIC PORT
DRONE
(NC)
TELEMATIC KIT (accessory sold separately)
DOC.: #28340
U.S. Patent No. 8,856,780
TYPE 1 - WIRE CHART - 1 OF 1M
AK
E
MO
DEL
YEA
R
WIR
ED
ESC
RIP
TIO
N
CO
NN
ECTO
RN
AM
E
CO
NN
ECTO
RC
OLO
R
CO
NN
ECTO
RTY
PE
PO
SITI
ON
WIR
EC
OLO
R
PO
LAR
ITY
MO
DU
LELO
CATI
ON
CO
MP
ON
ENT
LOCA
TOR
DO
DG
E DartSTD keyAT
13-16
CanH ~ Black 16 pin 06 Gray/White (DATA) OBDII connector ~
CanL ~ Black 16 pin 14 Yellow (DATA) OBDII connector ~
Parking Light ~ Black 06 pin 03 White/Brown (MUX) Parking light switch A
Rap Shutdown ~ ~ ~ ~ Purple (-) Driver kick panel harness B
www.idatastart.comAutomotive Data Solutions Inc. © 2016 COM-CH(RS)-CH8-[ADS-CH7]-EN
PAGE 5 OF 20• 20160418DOC.: #28340
U.S. Patent No. 8,856,780
MS1MS1
MS2MS2
A
B
79
3
108
111314
12
1517181920
16
64
12
5
364
12
5
C
79
3
108
1112
64
12
5
OBDII
C
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
VS2VS2
VS1VS1
A1
A2
B
123456
D
79
3
10864
12
5
C
B
A
F
G
E
D
CANL - 14
PARKING LIGHT (MUX) - 03
RAP SHUTDOWN (-)
HORN (-)
CANH - 06
02 GRAY - RAP SHUTDOWN (-) OUTPUT
TYPE 1 - WIRING DIAGRAM - 1 OF 1
OBDII CONNECTOR
PARKING LIGHT SWITCHPARKING LIGHT SWITCH
MODULE
11 GRAY/GREEN - HORN (-) OUTPUT
OPTIONAL
BROWN/REDBROWN/YELLOW
WHITE/BLACK (NC)WHITE/BROWNWHITE/RED (NC)WHITE (NC)
DRIVER KICK PANEL
HARNESS
BLACK
IGNITION CONNECTOR
IGNITION HARNESS
IGNITION NODE
AFTERMARKET HOOD SWITCH (-)
04 GRAY/WHITE - HOOD STATUS (-) INPUT
WITHOUT OEM HOOD SWITCH:INSTALL AND CONNECT TO
AFTERMARKET HOOD SWITCH
TELEMATIC PORT
RF PORT/WEBLINK PORT
www.idatastart.comAutomotive Data Solutions Inc. © 2016 COM-CH(RS)-CH8-[ADS-CH7]-EN
PAGE 6 OF 20• 20160418DOC.: #28340
U.S. Patent No. 8,856,780
TYPE 2 - WIRE CHART - 1 OF 1M
AK
E
MO
DEL
YEA
R
WIR
ED
ESC
RIP
TIO
N
CO
NN
ECTO
RN
AM
E
CO
NN
ECTO
RC
OLO
R
CO
NN
ECTO
RTY
PE
PO
SITI
ON
WIR
EC
OLO
R
PO
LAR
ITY
MO
DU
LELO
CATI
ON
CO
MP
ON
ENT
LOCA
TOR
RA
M
1500 /1500 DieselSTD keyAT
13-16
CanH D7405A Black 16 pin 06 Gray/White (DATA) OBDII connector ~
CanL D7405A Black 16 pin 14 Yellow (DATA) OBDII connector ~
Parking Light D2242A Black 10 pin 01 White/Brown (MUX) Parking light switch A
Rap Shutdown ~ ~ ~ ~ Purple (-) Driver kick panel harness B
2500 /2500 Diesel /3500 /3500 Diesel
13-16
CanH D7405A Black 16 pin 06 Gray/White (DATA) OBDII connector ~
CanL D7405A Black 16 pin 14 Yellow (DATA) OBDII connector ~
Parking Light D2242A Black 10 pin 01 White/Brown (MUX) Parking light switch A
Rap Shutdown ~ ~ ~ ~ Purple (-) Driver kick panel harness B
www.idatastart.comAutomotive Data Solutions Inc. © 2016 COM-CH(RS)-CH8-[ADS-CH7]-EN
PAGE 7 OF 20• 20160418DOC.: #28340
U.S. Patent No. 8,856,780
MS1MS1
MS2MS2
A
B
79
3
108
111314
12
1517181920
16
64
12
5
364
12
5
C
79
3
108
1112
64
12
5
OBDII
C
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
VS2VS2
VS1VS1
A1
A2
1 2 3 4 5
6 7 8 9 10
B
D
79
3
10864
12
5
C
B
A
F
G
E
D
CANL - 14
PARKING LIGHT (MUX) - 01
RAP SHUTDOWN (-)
HORN (-)
CANH - 06
02 GRAY - RAP SHUTDOWN (-) OUTPUT
TYPE 2 - WIRING DIAGRAM - 1 OF 1
OBDII CONNECTOR
PARKING LIGHT SWITCHPARKING LIGHT SWITCH
MODULE
11 GRAY/GREEN - HORN (-) OUTPUT
OPTIONAL
BROWN/REDBROWN/YELLOW
WHITE/BLACK (NC)WHITE/BROWNWHITE/RED (NC)WHITE (NC)
BLACK
DRIVER KICK PANEL
HARNESS
IGNITION CONNECTOR
IGNITION HARNESS
IGNITION NODE
AFTERMARKET HOOD SWITCH (-)
04 GRAY/WHITE - HOOD STATUS (-) INPUT
WITHOUT OEM HOOD SWITCH:INSTALL AND CONNECT TO
AFTERMARKET HOOD SWITCH
TELEMATIC PORT
RF PORT/WEBLINK PORT
www.idatastart.comAutomotive Data Solutions Inc. © 2016 COM-CH(RS)-CH8-[ADS-CH7]-EN
PAGE 8 OF 20• 20160418DOC.: #28340
U.S. Patent No. 8,856,780
01
02
03
04OFF
ACC ONSTART
05
06OFF
ACC ONSTART
07OFF
ACC ONSTART
08OFF
ACC ONSTART
09OFF
ACC ONSTART
10
11OFF
ACC ONSTART
12
13
14
15OFF
ACC ONSTART
16
17OFF
ACC ONSTART
18OFF
ACC ONSTART
MODULE PROGRAMMING PROCEDURE - 1 OF 2
Close driver door. Re-open driver door to wake up data bus.
Press Unlock on OEM remote. If the vehicle is not equipped with an OEM remote, press the module programming button.
Wait, LED will fl ash GREEN once [1x]. If LED does not fl ash GREEN, press Unlock on OEM remote again.
Turn key to ON position.
Wait, LED will turn solid RED.
Turn key to OFF position.
Remove key.
Insert key into ignition.
Turn key to ON position.
Wait, LED will fl ash GREEN.
Turn key to OFF position.
WARNING: Disconnect power last. Disconnect module from vehicle.
Connect module to computer and proceed with extended programming.
WARNING: Do not press module programming button. Connect power fi rst. Connect module to vehicle.
Turn key to ON position.
Wait, LED will turn solid GREEN for 2 seconds.
Turn key to OFF position.
Turn key to START position.
www.idatastart.comAutomotive Data Solutions Inc. © 2016 COM-CH(RS)-CH8-[ADS-CH7]-EN
PAGE 9 OF 20• 20160418DOC.: #28340
U.S. Patent No. 8,856,780
19OFF
ACC ONSTART
20
MODULE PROGRAMMING PROCEDURE - 2 OF 2
Turn key to OFF position.
Module Programming Procedure completed.
www.idatastart.comAutomotive Data Solutions Inc. © 2016 COM-CH(RS)-CH8-[ADS-CH7]-EN
PAGE 10 OF 20• 20160418DOC.: #28340
U.S. Patent No. 8,856,780
>>
01
02
ENGINESTARTSTOP
OFF ACC ON STARTON
03
04
ENGINESTARTSTOP
OFF ACC ON STARTOFF
05
>>
VALET MODE PROGRAMMING PROCEDURE - 1 OF 1
NOTE: In Valet Mode, the Remote starter is not functional. Keyless entry, Lock and Unlock will remain functional. See RF kit user manual for alternate valet mode programming.
Time restriction. Complete next step within 7 seconds.
Cycle ignition ON fi ve times [5x OFF/ON] rapidly.
Wait, LED 1 will turn solid RED for 2 seconds.
Set ignition to OFF position.
Valet Mode Programming Procedure completed.
To exit valet mode: repeat steps 1 to 5.
www.idatastart.comAutomotive Data Solutions Inc. © 2016 COM-CH(RS)-CH8-[ADS-CH7]-EN
PAGE 11 OF 20• 20160418DOC.: #28340
U.S. Patent No. 8,856,780
>>
01
02
ENGINESTARTSTOP
OFF ACC ON STARTON
03
04
05
06
07
>>
08
09
ENGINESTARTSTOP
OFF ACC ON STARTOFF
10
AFTERMARKET REMOTE PROGRAMMING PROCEDURE - 1 OF 1
WARNING: Program aftermarket remotes before usage. A maximum of four [4x] aftermarket remotes per system.
Time restriction. Complete next step within 7 seconds.
Cycle ignition ON fi ve times [5x OFF/ON] rapidly.
LED 1 will turn solid RED.
Time restriction. Complete next step within 2 seconds from previous step.
Press once [1x] on LOCK button of aftermarket remote.
LED 1 will fl ash GREEN once [1x].
LED 1 will turn solid RED.
To program additional remotes: repeat steps 4 to 7 using each additional remote.
Wait, LED 1 will turn OFF.
Set ignition to OFF position.
Aftermarket Remote Programming Procedure completed.
www.idatastart.comAutomotive Data Solutions Inc. © 2016 COM-CH(RS)-CH8-[ADS-CH7]-EN
PAGE 12 OF 20• 20160418DOC.: #28340
U.S. Patent No. 8,856,780
>>
>>
>>
01
ENGINESTARTSTOP
OFF ACC ON STARTOFF
02
03[X]
04
05[Y]
06
07[Z]
08[Z]
09
10
11[Y]
12
13
14
>>
MODULE NAVIGATION PROCEDURE - 1 OF 1
It is mandatory to exit the Module Navigation at the end of this procedure. Failure to exit the Module Navigation will drain vehicle battery. To exit the Module Navigation at any time: Follow STEP 13.
Module must be programmed to the vehicle.
Use the Module Navigation Chart on the next page.
Set ignition to OFF position.
TO ACCESS THE MENUS: Press and hold programming button until LED 1 turns solid GREEN.
IN THE MENUS: Press the programming button as many times as the menu number indicates. LED 1 will fl ash GREEN an equal amount of times continuously.
TO ACCESS THE OPTIONS: Press and hold programming button until LED 1 turns solid RED.
IN THE OPTIONS: Press the programming button as many times as the option number indicates. LED 1 will fl ash RED an equal amount of times continuously.
TO ACCESS THE SETTINGS: Press and hold programming button until LED 1 turns solid GREEN.
LED 1 will flash GREEN as many times as the current (or default) setting number, continuously.
IN THE SETTINGS: Press the programming button as many times as necessary to access your setting. LED 1 will fl ash GREEN an equal amount of times continuously.
To return to the MENUS: exit the Module Navigation and redo the Module Navigation Procedure.
To save and return to the OPTIONS: Press and hold programming button until LED 1 turns solid RED.
LED 1 will fl ash RED as many times as the current option number continuously.
Configure every other setting and proceed to step 13.
MANDATORY: EXIT MODULE NAVIGATION. Press and hold programming button for 7 seconds. LED 1 will fl ash RED rapidly. Release programming button. LED 1 will turn OFF.
Module navigation completed.
Failure to exit the Module Navigation will drain vehicle battery.
www.idatastart.comAutomotive Data Solutions Inc. © 2016 COM-CH(RS)-CH8-[ADS-CH7]-EN
PAGE 13 OF 20• 20160418DOC.: #28340
U.S. Patent No. 8,856,780
MODULE NAVIGATION CHART - 1 OF 2
MODULE NAVIGATION CHART:NOTES
[X] M
ENU
S
[Y] O
PTIO
NS
[Z] S
ETTI
NGS
I Default settings are listed in bold.
01 CONFIGURATION
01 DISARM/UNLOCK BEFORE START01 OFF
II Make sure the option is covered on the vehicle before attempting to change the setting.
02 ON
02 RELOCK AFTER START01 OFF02 ON
03 RELOCK AFTER SHUTDOWN01 OFF02 ON
04 FORCE UNLOCK ALL ON FIRST PRESS01 OFF02 ON
05 TAKEOVER01 ENABLE02 DISABLE*
06 N/A 01 N/A07 N/A 01 N/A
08 MODULE RUN TIME
01 03 MIN02 05 MIN03 10 MIN04 15 MIN05 25 MIN06 30 MIN07 35 MIN08 15 MIN
09 WAIT TO START DELAY
01 02 SEC02 05 SEC03 08 SEC04 10 SEC05 15 SEC06 20 SEC07 25 SEC08 30 SEC
10 N/A 01 N/A11 N/A 01 N/A12 N/A 01 N/A13 N/A 01 N/A
*Vehicle will shutdown when a door is opened.
www.idatastart.comAutomotive Data Solutions Inc. © 2016 COM-CH(RS)-CH8-[ADS-CH7]-EN
PAGE 14 OF 20• 20160418DOC.: #28340
U.S. Patent No. 8,856,780
MODULE NAVIGATION CHART - 2 OF 2
MODULE NAVIGATION CHART:NOTES
[X] M
ENU
S
[Y] O
PTIO
NS
[Z] S
ETTI
NGS
01 CONFIGURATION
14 HORN EVENT TRIGGER
01 DOUBLE LOCK02 LOCK + UNLOCK03 LOCK + UNLOCK + START04 DOUBLE LOCK + START
15 HORN CHIRPS WIDTH01 30 mSEC02 15 mSec03 60 mSec
02-07 Technical Support only 01 N/A 01 N/A*Vehicle will shutdown when a door is opened.
www.idatastart.comAutomotive Data Solutions Inc. © 2016 COM-CH(RS)-CH8-[ADS-CH7]-EN
PAGE 15 OF 20• 20160418DOC.: #28340
U.S. Patent No. 8,856,780
REMOTE STARTER ERROR CODES - 1 OF 1
REMOTE STARTER ERROR CODES:NOTES
[X] N
UM
BER
OF
PAR
KIN
G LI
GHT
FLAS
HES
DIA
GNO
STIC
I WARNING: The following applies only when the parking lights are connected and supported by the system.
01 Engine running. 02 Key in ignition at ON position.
II After a remote starter failure, the parking lights will fl ash three [3x] times, then will fl ash [X] number times to indicate an error code. See table.
03 N/A04 Trunk is open.05 Foot brake is ON. 06 Hood is open.07 N/A08 Tach failure.09 N/A10 System is in Valet Mode. 11 CAN communication failure12 RS not synchronized. Start vehicle with OEM key for 15 sec before trying a new RS sequence.
REMOTE STARTER SHUTDOWN ERROR CODES:NOTES
[Y] N
UM
BER
OF
PAR
KIN
G LI
GHT
FLAS
HES
DIA
GNO
STIC
I WARNING: The following applies only when the parking lights are connected and supported by the system.
01 Engine tach signal is lost.02 N/A
II If the engine shuts down after a remote starter sequence: Press and hold the Trunk button and the Start button at the same time for 2.5 seconds when using a 1-WAY remote. OR Press once [1x] on button “4” when using a 2-WAY remote.
The parking lights will fl ash four [4x] times, then will fl ash [Y] number times to indicate an error code. See table.
03 Foot brake is ON. 04 Hood is open.05 Engine RPM limiter is ON.06 Glow plug timeout error.07 Vehicle is moving (VSS).08 Check engine warning light is ON.09 Low fuel warning light is ON.10 N/A11 CAN communication failure during RS sequence.
www.idatastart.comAutomotive Data Solutions Inc. © 2016 COM-CH(RS)-CH8-[ADS-CH7]-EN
PAGE 16 OF 20• 20160418DOC.: #28340
U.S. Patent No. 8,856,780
MODULE DIAGNOSTICS - 1 OF 1
TEST MODULE
LED
1 S
TATU
S
DIA
GNO
STIC
I DURING PROGRAMMING
Flashing RED Missing/wrong information from fi rmware or vehicle.Solid RED Module waiting for more vehicle information.Flashing GREEN Additional steps required to complete module programming.Solid GREEN then OFF Module correctly programmed.OFF No activity or module already programmed.
II DURING REMOTE START
Flashing RED Module incorrectly programmed.Solid RED Module incorrectly programmed.Flashing GREEN Module correctly programmed and operational.Solid GREEN then OFF Reset in progress.OFF Invalid ground when running status from remote starter.
III WITH IGNITION OFF
Flashing RED Module incorrectly programmed or connected.Solid RED Module not programmed. Waiting for more vehicle information.Flashing GREEN False ground when running status from remote starter.Solid GREEN then OFF Reset in progress.OFF Module at rest and ready for a remote start sequence.
www.idatastart.comAutomotive Data Solutions Inc. © 2016 COM-CH(RS)-CH8-[ADS-CH7]-EN
PAGE 17 OF 20• 20160418DOC.: #28340
U.S. Patent No. 8,856,780
01
02
03
04
05
06
07
08
>>
MODULE RESET PROCEDURE - 1 OF 1
Disconnect all connectors from module except the BLACK 20-PIN connector.
Disconnect the BLACK 20-PIN connector.
PRESS AND HOLD the module’s programming button while connecting the BLACK 20-PIN connector.
Wait, LED 1 will flash RED. RELEASE programming button.
LED 1 will turn RED for 2 seconds.
Module RESET completed.
Reconnect all connectors.
Repeat programming procedure.
Failure to follow procedure may result with a DTC or a CHECK ENGINE error message.
www.idatastart.comAutomotive Data Solutions Inc. © 2016 COM-CH(RS)-CH8-[ADS-CH7]-EN
PAGE 18 OF 20• 20160418DOC.: #28340
U.S. Patent No. 8,856,780
>>
01
02
03
04
05OFF
ACC ONSTART
06
07
>>
TAKEOVER PROCEDURE - 1 OF 1
All vehicle doors must be closed and locked prior to remote start sequence.
Time restriction. Complete steps 2 to 6 within 45 seconds.
Press unlock on OEM or aftermarket remote.
Open driver door and enter vehicle.
Close driver door.
Turn key to ON position.
Press and release BRAKE pedal.
Take over procedure completed.
Failure to follow procedure will result in vehicle engine shutdown.
www.idatastart.comAutomotive Data Solutions Inc. © 2016 COM-CH(RS)-CH8-[ADS-CH7]-EN
PAGE 19 OF 20• 20160418DOC.: #28340
U.S. Patent No. 8,856,780
INSTALLATION CHECKLIST - 1 OF 1
1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.
2 Close all vehicle doors, hood and trunk.
3 Press the LOCK button once [1x] on the aftermarket keyfob.
¨
Question 1: Do the doors lock?
YES: Go to next step.
¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.
4 Press the UNLOCK button once [1x] on the aftermarket keyfob.
¨
Question 2: Do the doors unlock?
YES: Go to next step.
¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.
5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.
¨
Question 3: Does the trunk or hatch open/unlock?
YES: Close trunk or hatch and go to next step.
¨NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.
6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.
¨
Question 4: Does the driver side sliding door open?
YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.
¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.
7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.
¨
Question 5: Does the passenger side sliding door open?
YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.
¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.
8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.
¨
Question 6: Does the vehicle remote start?
YES: Go to next step.
¨NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.
9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.
¨
Question 7: Does the vehicle shut down?
YES: Go to next step.
¨NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.
10 RAP and auto light shutdown test
¨
Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?
YES: Go to next step.
¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.
11 Open hood.
12 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.
13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.
¨
Question 9: Does the vehicle remote start?
YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.
¨ NO: Go to next step.
14 Close hood.
15 Enter vehicle and close the doors.
16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.17 Wait for the vehicle to start.
18 Press brake pedal.
¨
Question 10: Does the vehicle shut down?
YES: Go to next step.
¨NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.
19 Exit vehicle.
20 Installation checklist completed.
CHECKLIST
www.idatastart.comAutomotive Data Solutions Inc. © 2016 COM-CH(RS)-CH8-[ADS-CH7]-EN
PAGE 20 OF 20• 20160418DOC.: #28340