installation guide alcatel-lucent 9341 rrh60w-21 a
TRANSCRIPT
Sheet 1 of 1204-6176-3.05 PreliminaryAlcatel-Lucent
Alcatel Lucent 9341 RRH 60 -21 A
SEE PROPRIETARY AND COPYRIGHT NOTICE ON COVER PAGEC
Sheet 1 of 1204-6176-3.05 PreliminaryAlcatel-Lucent
Installation Guide Alcatel Lucent 9341 RRH 60 -21 ATISALU W-CDMA
Alcatel-Lucent –PROPRIETARYThis document contains proprietary information of Alcatel-Lucent and is not to be disclosed
or used except in accordance with applicable contracts or agreements2010 Alcatel-Lucent All Rights Reserved
Design ControlSystem Used on
TF15-04-106
TF16-03-105
TF04-03-104
TF18-02-103
TF13-01-102
TF04-12-091
1. Preliminary version 201 according reviews2. Version 202:Update: Optical Mating process,
First and Second deployment, Details of screws for Bracket fixation wall and pole. LED’s status changed.
3. Version 301:Update “standard version” New slide of “Labelling”, New led status (slow & fast blinking green). Slide 10 new warning for alarms connections (close loop).
4. Version 302:Update Slide12 change code NTUM97JF by 3BK05360CAAA and Slide 13 table led’s status changed.
5. Version 303:GPCS 06.22 load tested on platform:update Slide 13 table led’s status changed (AR 1-2589284 FOA & AR 1-2589305 FOA).
6. Version 304: Remove Optical R2CT(first deployment possibility) Slide 5, remove slide 6 concerning (Optical first deployment).
7. Version 305: Pole mounting change Code 301019378 by 109751768
TF22-09-107
APPDDRWDateIssued
DRWIssue
Installation Guide
Alcatel-Lucent 9341 RRH60W-21 A
C
Sheet 2 of 1204-6176-3.05 PreliminaryAlcatel-Lucent
Alcatel Lucent 9341 RRH 60 -21 A
SEE PROPRIETARY AND COPYRIGHT NOTICE ON COVER PAGE
1.Labelling
1-Take the label in the RRH package2-Place the label in the right position
Note: The label must to be put in place before mounting
Sheet 3 of 1204-6176-3.05 PreliminaryAlcatel-Lucent
Alcatel Lucent 9341 RRH 60 -21 A
SEE PROPRIETARY AND COPYRIGHT NOTICE ON COVER PAGE
2. Wall Mounting Installation Note: Perform the installation step in the correct order: start with A, followed by B, then C, and finally D
A
D
C
B
Secure RRH to mounting bracket
Use the drilling template for the WallDrill 16 mm/0.63 for the diameter, 56mm depth.
Insert 4 Pegs
Fix the mounting bracket to the wall
Secure RRH on the mounting bracket
Solar Shield assembly in factory
RRH 3JR21013AAwith solar shield
Wall mount300972817
Secure screws each side
7.87 (200.00)
13.7
8 (3
50.0
0)
mm (inch)
(Pegs & screws)Provided by the customer)
!Warning
4x pitch to lock the nut=3.5mm4x M10 hex nut=8.5mm4x M10 flat washer 2.5mm4x M10 spring washer 2mm
Hoisting ring
Sheet 4 of 1204-6176-3.05 PreliminaryAlcatel-Lucent
Alcatel Lucent 9341 RRH 60 -21 A
SEE PROPRIETARY AND COPYRIGHT NOTICE ON COVER PAGE
3. Pole Mounting Installation Note: Perform the installation steps in the correct order: start with A, followed by B, and finally C
A
C
B
Secure RRH to mounting bracket
Fix the standard mount to the bracket band D=152-380 mm
RRH 3JR21013AAwith solar shield
Standard mount300972817
Fix the mounting bracket band to the pole D=152-380 mm 1 x 109751768
Bracket Pipe mountingD=50-152 mm1 x 300973005
Standard mount300972817
Secure screws each side
Pole D=152-380 Pole D=52-152OR
350 (13.78)mm (inch)
Pole
Pole
350 (13.78)mm (inch)
Solar Shield assembly in factory
350
mm
3 RRH SolutionSame elevation
4x M10 bolt: 6.8mm4x M10 flat washer 2.5mm4x M10 spring washer 2mm
Secure RRH on the standard mounting bracket
Sheet 5 of 1204-6176-3.05 PreliminaryAlcatel-Lucent
Alcatel Lucent 9341 RRH 60 -21 A
SEE PROPRIETARY AND COPYRIGHT NOTICE ON COVER PAGE
1Optical R2CT Kit1AB0272200016Existing Length :
15m, 30m,50m,70m,85m,100m,
150m,200m,250m and 300m.
1Optical fiber LC-LC :SM-SF, SM-DF, MM-DF
That depend of the lenght
7
Star configuration (slave port) or
Daisy Chain (master port)
1SFP, S-16.1, Single Mode, Dual Fiber,15KM, DUPLEX LC, -40/85
3010304335
Star configuration (slave port)
1SFP Optical TRANSCEIVER (Single
Mode, Single Fiber)
3009763133
Star configuration (slave port) Or
Daisy chain 1 (master port)
1SFP Optical TRANSCEIVER (Multi
Mode, Dual Fiber)
3009762972
Daisy Chain (master port)1SFP Optical TRANSCEIVER (Single
Mode, Single Fiber)
3009763054
1#
RRH 60W-A 2100 OD -48VDC
Designation RemarkQtyRefCables connected on the DC
PBA1 3JR21013AA4.Optical Cabling
1
Slave
Master
SFP SlaveSingle mode: 1310nmMulti mode: 850nm
SFP MasterSingle mode: 1550nmMulti mode: 850nm
2 3 5
42 5
6
7
Sheet 6 of 1204-6176-3.05 PreliminaryAlcatel-Lucent
Alcatel Lucent 9341 RRH 60 -21 A
SEE PROPRIETARY AND COPYRIGHT NOTICE ON COVER PAGE
7.Optical Cabling Mating Process
For the continuation see the next slide
Sheet 7 of 1204-6176-3.05 PreliminaryAlcatel-Lucent
Alcatel Lucent 9341 RRH 60 -21 A
SEE PROPRIETARY AND COPYRIGHT NOTICE ON COVER PAGE
8.Optical Cabling Process
Sheet 8 of 1204-6176-3.05 PreliminaryAlcatel-Lucent
Alcatel Lucent 9341 RRH 60 -21 A
SEE PROPRIETARY AND COPYRIGHT NOTICE ON COVER PAGE
6.Optical Cabling Unmating Process
Press to extract
Sheet 9 of 1204-6176-3.05 PreliminaryAlcatel-Lucent
Alcatel Lucent 9341 RRH 60 -21 A
SEE PROPRIETARY AND COPYRIGHT NOTICE ON COVER PAGE
Used when the power cable is connectorized on site, for length up to 15m
1POWER CONNECTOR ASSY RRH-4021
3009886079
Ground cable is mandatory for the RRH installation .
1GROUND CABLE WITH A DOUBLE LUG – 16M – 16 mm²
NTU707AQ10
Power cable, 15M length: Connect the RRH to a DC power plant
1KIT, CABLE, POWER, CONNECTORIZED 6mm² (10 AWG) , -48V, 15m (50 ft.)
3009728748# Designation RemarkQtyRef
9.Power Cabling
9
Connectorize a cable (6 mm² max) on the site or in warehouse using a DC POWER CONNECTOR ASSY RRH alone
8
10
The Kit 300988607 includes : Connector reference: Tyco Series 3 CPC 206036-2 + contacts x2 ref 66741-6 + 202A153-30 protective boot + S1017 sealent adhesive tape
Sheet 10 of 1204-6176-3.05 PreliminaryAlcatel-Lucent
Alcatel Lucent 9341 RRH 60 -21 A
SEE PROPRIETARY AND COPYRIGHT NOTICE ON COVER PAGE
10.Alarm External cable and Pin-Out
Note: If the color pairs are not as specified, the supplier must provide an amendment to the above table, giving the actual cable colors used. This information must be supplied on a notice delivered with each cable
Refer to the pin out table1CABLE, ALARM CONNECTORIZED XPAIR – 15M
3JR30016AA11# Designation RemarkQtyRef
11
The Pin out related to the wire color must be delivered with the alarm cable
!Warning
The alarm is raised when the 2 alarm’s wires are connected (close loop)
Sheet 11 of 1204-6176-3.05 PreliminaryAlcatel-Lucent
Alcatel Lucent 9341 RRH 60 -21 A
SEE PROPRIETARY AND COPYRIGHT NOTICE ON COVER PAGE
12#
JUMPER 7/16 MM LG=1.5M
Designation RemarkQtyRefProvide two RF jumpers per sector on RRH side.
1 3BK05360CAAA11.RF Cabling
RRH top viewRF Jumper
!Warning
Front
Rear
In case of RRH replacementThe RF connection is reversed, compared to the other type of RRH.So, make sure that the RX andTX/RX are respected.
12