1. install DAEMON Tools Pro Advanced v5.1 instruction: 1. Before installing program add regfile "ConnectionSettings.reg" to the registry (double click on it). 2. Run Setup. Select Trial license >>> Advanced Edition. Deselect option "Integrate with Windows Explorer" (You can re-enable Explorer integration later in the program options) an d install program. Do NOT run program after installation (uncheck "Run DAEMON Tools Pro" at the end of installation). 3. Copy MSIMG32.dll from crack folder to the installation folder BEFORE running the application . 4. Run DTPro.exe, go to Help - License - Change - Paid License and enter this serial: 36dbdd7153335475fc1cad5a0d66b817 There will be a error "no connection to the server", click Try later. Th at`s all. You have full cracked Advanced Edition. 2. Open Autodesk autocad. 2013 folder>>double click on ADAK13PCE64.part01>>Autod esk autocad 2013 >>AUTOCAD_2013 3. double cick on acad2013_x64.iso 4. run the autocad installer 5 1.Install Autodesk Autocad 2013 2.Use as Serial 666-69696969, 667-98989898, 400-45454545 066-66666666 .. or anything matching those templates 3.Use as Product Key 001E1 4.Finish the installation & restart Autodesk Product 5.Before clicking on Activate You have 2 options : - a) Disable Your network Card, pull the network cable out or block wi th firewall (this is just to disable online serial check) OR - b) Click on Activate and it will tell you that your serial is wrong, simply click on close and click on activate again. Choose option a or b. 6. Select I have an activation code from Autodesk 7.Once at the activation screen: start XFORCE Keygen 64bits version to start: right click>> run as administrator 8.Click on Mem Patch (you should see successfully patched)9.Copy the request code into the keygen and press generate 10.Now copy the activation code back to the activation screen and click Next You have a fully registered autodesk productNB: Make sure you are running the Keygen as administrator and with UAC off on Wi ndows7