MINI DSG Reader DQ200+DQ250 Installation Manual

Step 1: Copy the software in the CD, paste them to your local

disk.

Step 2: Disable all Network Connection, including: the local

area connection, wireless network connection and 1394

connection.

Step 3: Open the MINI DSG Reader folder, click “run me first

registration entries”, and a windows dialogue popup reading:

Registry Editor„, click OK.

Step 4: Click icon “DSG Reader” and a windows dialogue popup

displaying License expired, click OK, then another one popup showing

machine ID, press “ctrl+v” to paste, and click OK.

Step 5:

Create one txt file in the desktop and into it paste the machine ID, then

send it to your seller for activation.

Step 6: your seller send back the license file activated, cut it and paste it

in to the Mini DSG reader folder.

Step 7: right click the green icon “DSG Reader” to open it, then close the

appeared screen, and again right click “DSG Reader”-send

to-Desktop(create shortcut)

Step 8: connect the DSG reader to the computer and the car, then it will

popup windows “ found new hardware”, step-to-step to install it.

Step 9: click “my computer-device manager”, if you find “USB OBD II

cable”, it means the computer and the DSG reader establish

communication.

Step 10: Open the “Shotcut to DSGreader” in the desktop.

Now, you are ready to start to use DSG reader to read and write latest

dual-clutch DSG gearbox data for AUDI and VW.