Universal Door Closerwith A14 Heavy DutyFriction Hold Open

Parallel Arm

IMPORTANT: An improperly installed or incorrectly adjusted door closer may causeor and will void product warranty.

To avoid personal injury,

propertydamage personal injury;

DO NOT DISASSEMBLE THIS DOOR CLOSER BODY.Door closers must be securely fastened to a properly reinforced door and framewith fasteners provided.An auxiliary door stop, BY OTHERS, is required for this InstallationArm is handed and must match hand of door.

TO DETERMINEHAND OF

YOUR DOOR:

LEFTHANDDOOR

RIGHTHANDDOOR

Size of Door & Door CloserType

ofInstallation

Interior ExteriorIn-swinging

ExteriorOut -swinging

RecommendedCloser Size

**Max.Opening

Forcelbs/f

2 42 63 03 64 04 6

' "' "' "' "' "' "

2 63 03 64 0

' "' "' "' "

81416222426

123456

**NOTE: These forces are for standard templating with bearing type hinges and do not account for pressure differentials and draft.

ParallelArm

RHR LHR

80-9380-8007-152 Rev. 07/09

DC8210 SeriesMulti-Sized 1 thru 6

BEFOREINSTALLING:

ADA compliant closers are: DC8210.

The Americans with Disabilities Act (ADA) requires that doors having door closershave an opening force not to exceed 5 lbf.

The door closer's power size adjustment feature may require adjustment to itslowest setting to comply with ADA opening force guidelines.

Heavy Duty Friction Hold Open

Friction HoldOpen AdjustmentNut

No Drill MarkRight Hand Arm Drill Mark

Left Hand Arm

As Easy As A CB G

Installation Instructions

1

5/8(16)

REF.

DOOR

FRAME

ADAPTERPLATE

Mark Door and Jamb (for QUIK-INSTALL bracket and arm bracket)Use template and dimensions charted.

®1. Template

80-9380-8007-152 Rev. 07/09

SPACER BLOCK(When required)

2(51)

2(51)

2(51)

1(25)

1-1/2(38)

SEE MOUNTING SCREWSPECIFICATIONS

NOTE: ANGLE SUPPORT MUST BEDRILLED AND TAPPED IN THE FIELD

447F14 DOOR

FRAME

M85 OPTION 447F14ANGLE SUPPORT BRACKET

Parallel Arm

5/8(16)

FRAME STOP

CLHINGE

ORPIVOT

2-3/4(70)

5/8(16)

1-1/2(38)

1/4(6)

B

A

TYP.

15/16(24)

3/4(19) 1-3/8

(35)Minimum Clearance

10(254)

3-1/16(78)

Adp3

(76)4-3/4(121)

3(76)

TOP OF DOOR

DOOR

FRAME STOP

CDROP PLATEMounting Holes (4)754F25

1(25)

1/2(13)

3/8(10)

MAXIMUMOPENING

A B Application

90°

180°

7-1/4(184)

3-1/4(83)

11(279)

7(178)

NONA.D.A.

C

27(686)

23(584)

(Quick InstallBracket) (Soffit Bracket) (Clearance)

2

DC8200xA14 Heavy Duty Friction Hold OpenParallel Arm Installation Instructions

DC EBThis Pa g e Next Page ( 3 )3

A F

NOTES:Check hand of door, see page 1 .Right Hand Application Shown. Left HandOpposite.Dimensions given in inches (mm). Do NotScale Drawing.Closer must be installed in a true horizontalplane to ensure proper closer performance.Friction Hold Open arms are handed and notreversible. See handing marks on soffit plate.

1

A

Next Page ( 2 )4

G

Adp

2-3/4(70)

6-3/4(171)

(Drop Plate)

QUIK-INSTALLBRACKET 754F18

L

3/8(10) 1/4-20 THREAD

Drill thru 9/32 (7) Enlarge to3/8 (10) Dia. This Side Only(4 Places)

MOUNTING SCREW SPECIFICATIONSARM AND BRACKETQUIK-INSTALL

} or{Sex nuts, furnishedwhen ordered

#12-14 self-drilling screw.1/8 (3) diameter pilot holerequired for WoodApplications. DOOR

THICKNESSSEX NUT

LENGTH “L”

1-3/8 (35)

1-3/4 (44)& OVER

1-9/32 (33)

1-21/32 (42)

Open door to approximately 60°Using wrench on underside of spindle, rotateapproximately 135° toward hinge edge of door.Install arm on spindle at an approximate90° angle to door.Reopen CLOSING SPEED VALVE.Install & tighten 5/16 Hex Head ArmWasher & Screw assembly.

80-9380-8007-152 Rev. 07/09

Friction Hold OpenAdjustment Nut

+ -6. Adjust Hold Open PositionOpen the door to desired degree of hold open.(If door does not open far enough, loosen HoldOpen Adjustment Nut.) Place door at the desireddegree for hold open and tighten the Hold OpenAdjustment Nut.Rotation:

Pushing door beyond the set hold open pointmay cause damage to product.

ALL ANGLES SHOWN ARE APPROXIMATE

5. Connect Arm To CloserUsing hex wrench provided, close (turn clockwise)CLOSING SPEED VALVE (see page 4 for location oncloser). DO NOT OVER TIGHTEN.

DO

OR

SPINDLE

ARMCENTERLINE

DO

OR

90°

SPINDLEROTATED 135°

Rotate 135°

SPINDLE AT REST

4. Mount Arm to Door Frame

#12-24 x 5/8 FHMS (4)

60°DOOR

135°WRENCH

90°ARM

Mount QUIK-INSTALL Bracket®

3

B

Counter-clockwise will increase (+) angle.Clockwise will decrease (-) angle.

DC8200xA14 Heavy Duty Friction Hold OpenParallel Arm Installation Instructions

DC EBThis Pa g ePrevious Page ( 2 )2

A F

C

D E

F

Next Page ( 2 )4

G

Mount Closer Body toBracketQUIK-INSTALL

Start the four mounting screws into the four closer mounting holes.

Place the closer onto the bracket with the fourmounting screws inserted into the four bracket slots.

QUIK-INSTALLQUIK-INSTALL

Tighten the four mounting screws to fasten the closer body to thebracket.QUIK-INSTALL

#12-14 X 1-1/2 FH SELF-DRILLING (4)OR

1/4-20 X 3/4 FHMS W/ SEX NUTS (4)

#12-14 X 1-1/2 FH SELF-DRILLING (6)

80-9380-8007-152 Rev. 07/09

Interior ExteriorIn

Swing

ExteriorOut

Swing

LATCHINGSPEED VALVE

BACKCHECKINTENSITY VALVE

CLOSINGSPEED VALVE

SPRING POWER ADJUSTER(1/4 ALLEN WRENCH)"

Size of Door

(Approx.)

EquivalentCloser Size

DC8200 SPRING POWER ADJUSTMENT CHART2 4 (712)

2 6 (764)

3 0 (915)

3 6 (1067)

' "' "' "' "

3

4

5

62 6 (764)

3 0 (915)

' "' "

2 6 (764)

3 0 (915)

3 6 (1067)

4 0 (1219)

' "' "' "' "

Spring Power Adjustment

DC8200 Size 1 thru 6 Adjustment See Chart

All DC8200 closers are factory set at an approximateAdjust closer as necessary for door size using this chart.Readjustment may be required to suit prevailing conditions.

Size 3.

Locate spring power adjuster from Illustration below

Backcheck Intensity ValveTurn valve COUNTER-CLOCKWISE to reduce backcheckor CLOCKWISE to increase backcheck. (Backcheck shouldbe set to give a soft cushioning action, not a sudden stop.)

After closing speed has been obtained, turn latching speed valveCLOCKWISE to SLOW latching or COUNTER-CLOCKWISE toSPEED latching for last 2 to 5 of door travel.NOTE: Set combination of CLOSING and LATCHING speeds to

between 3 and 7 seconds Use of door by handicapped,elderly or small children may require even greaterclosing time.

" "

Closing Speed ValveTo adjust speed of door closing from fully open to a position2 to 5 from closed, turn Closing Speed Valve CLOCKWISEto SLOW closing, COUNTER-CLOCKWISE to SPEEDclosing.

" "

Delayed Action ValveTurn valve CLOCKWISE to SLOW closing, COUNTER-CLOCKWISE to SPEED closing. Delayed action may beadjusted from 20 seconds to 90 seconds, depending ondegree of door swing. Delay occurs at the beginning of the

door closing cycle from fully open down to 70°, where theclosing speed valve then begins its control.

Latc

h

Clo

sing

Sp

eed

BackcheckDelayedActionOptionM71

Full Cover(Standard)

(1/8 Allen Wrench Provided)

(1/8 Allen Wrench Provided)

(1/8 Allen Wrench Provided)

OPTION M71DELAYEDACTION VALVE

Insert is removable.Place in unused opening.

2-7

7-11

11-15

15-17

Spring PowerAdjustment

No. Full TurnsClockwise

4

G Adjust Closer

DC8200xA14 Heavy Duty Friction Hold OpenParallel Arm Installation Instructions

DC EBThis Pa g ePrevious Page ( , )2

A F G3

Date Stamp(on end of closer)MM-YY

MM = MonthYY = Year

Latching Speed Valve

Slip cover over closer.Hold tightly against QUIK-INSTALL Bracket surface.Secure on each side with 6-32 x 1/4 PBHMS screws.

®

"

Installing Cover

Copyright © 2006, 2009, Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission

of Corbin Russwin, Inc. is prohibited.