installation manual lake/m_85457_mobilink.pdfthe mobilink tm-p60, built with epson’s quality and...
TRANSCRIPT
Epson MobilinkTM-P60 Portable Printer
Version 1.0
Installation Manual
85457
© 2004 Rice Lake Weighing Systems. All rights reserved. Printed in the United States of America. Specifications subject to change without notice.
ContentsAbout This Manual ................................................................................................................................... 11.0 Introduction.................................................................................................................................. 12.0 Setup ............................................................................................................................................ 1
2.1 Unpacking and Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.2 Serial Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.3 COM 1 Port Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.4 Load Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.5 Set Printer Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.6 Printer Utility Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3.0 Configuration ............................................................................................................................... 44.0 Appendix .................................................................................................................................... 10
4.1 Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104.2 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Version 1.0, November 2004
About This ManualThis manual contains operating procedures for the Mobilink TM-P60 printer and provides you with all the information necessary for setup and operation.
Authorized distributors and their employees can view or download this manual from the Rice Lake Weighing Systems distributor site at www.rlws.com.
1.0 IntroductionThe Mobilink TM-P60, built with Epson’s quality and reliability, is designed to meet the needs of both retail and hospitality industries for high-speed, on-the-go thermal receipt printing. Features include:
• Eight-hour battery life• Rugged design for harsh environments• High-speed thermal receipt and label printing• Auto cutter and drop-in paper loading• Supports 802.11 wireless protocol
(Bluetooth™ wireless available)
• Print width up to 54 mm (2.13")• Non-volatile memory to store logos and print
clean receipt• Belt clip and shoulder strap for maximum
mobility
2.0 SetupThis section describes procedures for installation, setup, and connecting serial communications cables to the Mobilink TM-P60 printer.
2.1 Unpacking and AssemblyImmediately after unpacking, visually inspect the Mobilink TM-P60 to ensure all components are included and undamaged. The shipping carton should contain the printer (PN 85456) and the parts kit listed below.
• AC battery charger (PN 85351)• Serial cable (PN 85459)• One roll thermal paper (PN 79447)• Installation CD (PN 85461)• Installation manual (PN 85457)
2.2 Serial ConnectionThis section includes instructions on how to set up a serial connection to the Mobilink TM-P60 printer.
1. Turn off the printer2. Open the RS-232 connector cover located on
the side of the printer.3. Connect the serial interface cable to the
printer and the serial port on the host PC.4. Press and hold the FEED button on the printer
and press the POWER button.NOTES:
• RS-232 nine-pin cable (PN 85459) used for setup only
• Printer senses serial cable on power up
• The printer automatically prints the self test results before use.
2.3 COM 1 Port SetupUsing an IBM-compatible personal computer running Windows® 2000 or XP follow the steps in this section to set up COM 1 port properties to printer default settings.
NOTE: Setup may vary with operating system.
1. Click the start button on the PC monitor2. Go to the Control Panel option3. Select System Properties and Communication
Port4. Go to Port Settings5. Enter the default printer settings listed below.
See Figure 2-1 on page 2.• Bits per second: 19200• Data bits: 8• Parity: none• Stop bits: 1• Flow control: Xon / Xoff
Introduction 1
Figure 2-1. COM1 Port Example
2.4 Load MediaThe following instructions explain how to install the roll paper in the Mobilink TM-P60.
1. Open the roll paper cover by pressing the button beside it. 2. Remove the used roll paper core (if applicable) and insert the new roll. Paper feeds from the bottom out
between the tear bar and the cover.3. Extend a short section of paper, close the cover and tear off the extra paper using the tear bar.
2.5 Set Printer DefaultsFollow these instructions to default the printer:
1. Open door2. Hold down the FEED button and press the
POWER button3. Press the FEED button six times4. Close door5. Open door6. Press FEED one time 7. Close door
NOTE: Some important default settings to remember:
• Default IP: 192.168.192.168• Default subnet mask: 255.255.255.0• Default SSID: EpsonNetIBSS (case
sensitive)• Default port: 9100• Default channel: 11
2 Mobilink TM-P60 Installation Manual
2.6 Printer Utility InstallationInstall the CD containing the WinConfig utility or download it from the link provided
Utility: UB-R02 TMNet WinConfig
Link: http://www.epsonexpert.com/ee/techRes/index.htm?Productld=492
Figure 2-2 displays the default path the utility will install to.
Figure 2-2. TMNet WinConfig Installation Screen
Setup 3
3.0 ConfigurationFigure 3-1 shows the opening screen of the TMNet WinConfig utility
.
Figure 3-1. Utility Start Screen
Figure 3-2 shows the first screen of the utility.
Figure 3-2. WinConfig First Screen
4 Mobilink TM-P60 Installation Manual
Figure 3-3 shows the download screen for the printer.
Figure 3-3. Download Screen
Configuration 5
Figure 3-4 shows the path for setting up the com port.
Figure 3-4. Com Port Setup Path
Figure 3-5 shows the default settings to be used.
Figure 3-5. Default Settings
6 Mobilink TM-P60 Installation Manual
Double click TM-P60 under Model Name then select View - Refresh on the tool bar
Figure 3-6. Printer Selection
Figure 3-7 shows the default settings - these are not configured yet.
Figure 3-7. Interface Properties
Configuration 7
Figure 3-8 shows where you enter and verify the wireless information.
Figure 3-8. Interface Properties
Figure 3-9 shows the screen for entering the TCP/IP information.
Figure 3-9. Interface Properties
8 Mobilink TM-P60 Installation Manual
Figure 3-10 shows the information screen. Click Refresh to enable configuration.
Figure 3-10. Interface Properties
Figure 3-11 shows the final WinConfig configuration screen. Click OK to send data and finish configuration.
Figure 3-11. Data Sending Confirmation
Configuration 9
10 Mobilink TM-P60 Installation Manual
4.0 Appendix
4.1 Options
4.2 SpecificationsPrinterInterface RS-232C (setup), 802.11b (default)Protocols TCP, UDP, ICMP, IPData Buffer 128 bytesPrint Speed 70 mm/sec (max)Paper Loading Drop-inPaper Width 58 mm/2.28” (default), 60 mm/2.36”
(spacers provided)Paper Diameter 50 mm (max)Auto Cutter Software controlled – Partial cut, left
uncut (500,000 cuts)
System RequirementsOperating System Windows® 2000/XP recommendedAccess Point 802.11bPrint Protocol Port 9100
PrintingPrint Method Thermal line printingDot/Line 420/432 dotsFont A: 12 x 24
B: 10 x 24 C: 8 x 16
Column Capacity 58 mm paperFont A: 35 columnsFont B: 42 columnsFont C: 52 columns
Column Capacity (continued)60 mm paperFont A: 36 columnsFont B: 43 columnsFont C: 54 columns
Character Size 60 mm paperFont A: 1.5 (W) x 3.0 (H) mm
.059 x .118”Font B: 1.25 (W) x 3.0 (H) mm
.049 x .118”Font C: 1.0 (W) x 2.0 (H) mm
.039 x .079”Character Set 95 alphanumeric, 48 international,
128 x 10 graphicCharacters Per Inch Font A: 17 cpi
Font B: 20 cpiFont C: 25 cpi
Dots Per Inch 203 dpiBar Code UPC-A, UPC-E, JAN8 (EAN), JAN13
(EAN), CODE 39, CODE 93, CODE 128, ITF, CODABAR
PowerLithium-ion Battery Eight–hour life(rechargable)AC adapterPower Charging AC adapter (five hours for full charge)
Electrical SpecificationsEMC Standards VCII class A, FCC class A, CE
marking, AS/NZS 3548 class BDKD Functions Dual driversMCBF 10,000,000 lines
EnvironmentalOperating Temperature 0°C to 50° C
32° F to 122° FWater Proof Moisture resistant (IPX1)Dust Proof Dust resistant (IPX3)
EnclosureDimensions 103 (W) x 159 (D) x 65 (H) mm
4.05 x 6.25 x 2.55“Weight 599 g w/battery w/out paper roll
1.32 lb
Part Number Name Description
85456 Printer Mobilink TM-P60 Printer
85351 PS-10 Exclusive AC adapter for charging. Connects directly to the TM-P60. Charge time: five hours.
85458 OT-CH60 Remove the battery from the TM-P60 for charging. Charge time: 2.5 hours.
85459 OT-RS60 Serial cable connection
85460 LIP-2500 Lithium-ion battery
75947 Roll Paper
Required for printing
85457 Manual Installation Manual (this manual)
85461 TM-P60 CD
Technical Reference, TMNetconfig, TMRogo
Table 4-1. Options and Replacement Parts