installation manual - super-obd.comsuper-obd.com/installation.pdf · installation manual this...
TRANSCRIPT
Installation Manual
This device will only work on cars fitted with an OBD port. Petrol cars built since 2003 and Diesel cars
built since 2004 have these ports.
Disclaimer: Please remember to remove the device when not in use to avoid battery drain. This device has not be tested with all cars, use device at your
own risk.
If you have any questions email us at [email protected]
or call us on +44 1344 595 460
Contents
Page 2-17
iOS Devices
WiFi OBD
Page 18-29
Android Devices
WiFi OBDPage 32-39Bluetooth OBD
Installation ManualPage 3-9
iOS Devices (WiFi)
TroubleshootingPage 10-17
Page 2
Your device will look like...
Step 1
Plug the Super OBD into the diagnostic port on your car. The OBD (On Board Diagnostics) port is usually located beneath the steering wheel column and is
sometimes behind a plastic door.
1/7Page 3
iOS
Step 2
Turn your key in the ignition to the on position (do not start the engine), you̓ll see a red light appear on
the Super OBD device.
2/7
iOS
Page 4
Step 3
Go to your phones settings page, then wifi settings, connect to WiFi_OBDII
3/7
iOS
Page 5
Step 4
Visit the App Store on your mobile device and download the free app called OBD Car Doctor.
4/7
iOS
Page 6
Step 5
Open the app and press the connect button at the top of the screen.
5/7
iOS
Page 7
Step 6
You̓ll see some green text at appear and change a few times at the top of the screen, in a few seconds the app will connect to your device. Navigate the app for diagnostic and sensor information.
6/7
iOS
Page 8
Step 7
If the app doesn̓t connect after 60 seconds, click disconnect and then click connect again.
7/7
iOS
Page 9
Troubleshooting
If you are still experiencing problems connecting to the Super OBD please try the following steps.
iOS
If you have any further questions email us at [email protected]
or call us on +44 1344 595 460
Page 10
Step 1
Go to your devices WiFi page and click the blue information symbol next to ‘WiFi_OBDII̓.
1/7
iOS
Page 11
Step 2
On the next page in the IP Address section press the button labeled static.
2/7
iOS
Page 12
Step 3
In the IP Address box type 192.168.0.11
3/7
iOS
Page 13
Step 4
In the Subnet Mask box type 255.255.255.0
4/7
iOS
Page 14
Step 5
Press the back arrow at the top of the screen to save the settings and return to your wifi page. Return to the app and continue from Page 7.
5/7
iOS
Page 15
Step 6
Open the OBD Car Doctor app and select the menu at the top right. Select Settings from the options.
6/7
iOS
Page 16
Step 7
Check your IP Addess is set to 192.168.0.10 and your Port is set to 35000. If they aren̓t, then select the field and manually change these. Press Save to
save the settings.
7/7
iOS
Page 17
Installation ManualPage 18-27
Android Devices (WiFi)
TroubleshootingPage 28-31
Page 18
Your device will look like...
Step 1
Plug the Super OBD into the diagnostic port on your car. The OBD (On Board Diagnostics) port is usually located beneath the steering wheel column and is
sometimes behind a plastic door.
1/9
Android
Page 19
Step 2
Turn your key in the ignition to the on position (do not start the engine), you̓ll see a red light appear on
the Super OBD device.
2/9
Android
Page 20
Step 3
Go to your phones settings page, then wifi settings, connect to WiFi_OBDII
3/9
Android
Page 21
Step 4
Click Connect to complete the connection.
4/9
Android
Page 22
Step 5
Visit the PlayStore on your mobile device and download the free app called OBD Car Doctor.
5/9
Android
Page 23
Step 6
Open the app and follow the onscreen instructions, press the next arrow for more steps.
6/9
Android
Page 24
Step 7
Select Connect via WiFi and click OK.
7/9
Android
Page 25
Step 8
If not connected automatically click Connect <WIFI> to connect the app to your OBD device.
8/9
Android
Page 26
Step 9
Navigate the app for diagnostic and sensor information about your vehicle.
9/9
Android
Page 27
Troubleshooting
If you are still experiencing problems connecting to the Super OBD please try the following steps.
If you have any further questions email us at [email protected]
or call us on +44 1344 595 460
Page 28
Android
Step 1
In the OBD Car Doctor app click the menu icon at the top left and select settings.
1/3
Android
Page 29
Step 2
Select the Connection tab.
2/3
Android
Page 30
Step 3
Check your WiFi IP is set to 192.168.0.10 and your WiFi Port is set to 35000. If they aren̓t, then select the field and manually change these. Press OK to
save the settings.
3/3
Android
Page 31
Installation ManualPage 32-40
Android Devices (Bluetooth)
TroubleshootingPage 41-44
Page 32
Your device will look like...
Step 1
Plug the Super OBD into the diagnostic port on your car. The OBD (On Board Diagnostics) port is usually located beneath the steering wheel column and is
sometimes behind a plastic door.
1/8
Android
Page 33
Step 2
Turn your key in the ignition to the on position (do not start the engine), you̓ll see a red light appear on
the Super OBD device.
2/8
Android
Page 34
Step 3
Go to your phones bluetooh settings and connect to ‘obd2̓. If a passkey is required use 1234 or 0000.
3/8
Android
Page 35
Step 4
Visit the PlayStore on your mobile device and download the free app called OBD Car Doctor.
4/8
Android
Page 36
Step 5
Open the app and follow the onscreen instructions, press the next arrow for more steps.
5/8
Android
Page 37
Step 6
Select Connect via Bluetooth and click OK.
6/8
Android
Page 38
Step 7
If not connected automatically click Connect <BT “OBDII”> to connect the app to your OBD device.
7/8
Android
Page 39
Step 8
Navigate the app for diagnostic and sensor information about your vehicle.
8/8
Android
Page 40
Troubleshooting
If you are still experiencing problems connecting to your Super OBD please try the following steps.
If you have any further questions email us at [email protected]
or call us on +44 1344 595 460
Page 41
Android
Step 1
In the OBD Car Doctor app click the menu icon at the top left and select Settings.
1/3
Android
Page 42
Step 2
Select the Connection option.
2/3
Android
Page 43
Step 3
Check your connection mode is set to Bluetooth. If the connection asks for a passkey the default for all
OBD devices is 1234 or 0000.
3/3
Android
Page 44