installation user guide

2
Polyvision TM Panel BLK WHITE SWITCH Powers up to 60 sf. of Glass Polyvision TM Panel 1 2 3 4 L N N 120/277VAC TIMER SUPPLY SPST LOAD TORK ® E101B 24-HOUR DIGITAL TIME SWITCH WHITE BLK PDLC POWER SUPPLY SHRINK TUBE SOLDER JOINT All connections must be soldered and sealed with shrink tubing. Wires can be extended with 18 AWG wires. CAUTION - READ THIS FIRST! IT IS CRITICAL THAT CUSTOMERS INSPECT THE SHIPMENT IN THE PRESENCE OF THE FREIGHT DELIVERY DRIVER. IF YOU FAIL TO INSPECT THE SHIPMENT, THE CARRIER AND POLYTRONIX, INC. ARE NOT RESPONSIBLE FOR DAMAGES. INSPECT EACH PANEL OF GLASS FOR DAMAGES. CHECK PACKING LIST FOR QUANTITIES OF GLASS PANELS AND POWER SUPPLIES. POLYVISION PANELS MUST BE STORED WHERE THE RELATIVE HUMIDITY IS LESS THAN 80% TO PREVENT GLASS FROM STAINING* *Refer to Binder for additional installation cautions and information USE ONLY NON-ACETIC SEALANTS GE SSG4000 Dow Corning 399, 795, 991, 995, 1199 Rhodorsi 3B (Rhone-Poulenc) Schnee-Morehead SM5731 THIS GLASS MUST BE TURNED OFF A MINIMUM OF 4 HOURS EVERY 24 HOUR PERIOD Opaque/OFF Clear/ON Clear/ON Timers are highly recommended Diagram below shows wiring (with using the timer or without timer) HIGH HAZE LOW HAZE

Upload: polytronix-inc

Post on 29-Jan-2016

250 views

Category:

Documents


0 download

DESCRIPTION

Polyvision Glass Installation and Inspection Guide

TRANSCRIPT

Page 1: Installation User Guide

PolyvisionTM

Panel

BLK

WHITE

SWITCH

Powers up to60 sf. of Glass

PolyvisionTM

Panel

1 2 3 4

L NN120/277VAC

TIMERSUPPLY

SPST

LOAD

TORK® E101B 24-HOURDIGITAL TIME SWITCH

WHITEBLK

PDLCPOWERSUPPLY

SHRINK TUBE

SOLDER JOINT

All connections must be soldered and sealed with shrink tubing. Wires can be

extended with 18 AWG wires.

CAUTION - READ THIS FIRST!IT IS CRITICAL THAT CUSTOMERS INSPECT THE SHIPMENT IN THE PRESENCE

OF THE FREIGHT DELIVERY DRIVER. IF YOU FAIL TO INSPECT THE SHIPMENT, THE CARRIER AND POLYTRONIX, INC. ARE NOT RESPONSIBLE FOR DAMAGES.

INSPECT EACH PANEL OF GLASS FOR DAMAGES. CHECK PACKING LIST FOR QUANTITIES OF GLASS PANELS AND POWER SUPPLIES.

POLYVISION PANELS MUST BE STORED WHERE THE RELATIVE HUMIDITY IS LESSTHAN 80% TO PREVENT GLASS FROM STAINING*

*Refer to Binder for additional installation cautions and information

USE ONLY NON-ACETIC SEALANTS GE SSG4000 Dow Corning 399, 795, 991, 995, 1199 Rhodorsi 3B (Rhone-Poulenc) Schnee-Morehead SM5731

THIS GLASS MUST BE TURNED OFFA MINIMUM OF 4 HOURS EVERY 24 HOUR PERIOD

Opaque/OFF Clear/ONClear/ON

Timers are highly recommendedDiagram below shows wiring (with using the timer or without timer)

HIGH HAZE LOW HAZE

Page 2: Installation User Guide

3-YEAR LIMITED WARRANTYPolytronix, Inc. provides a 3-year limited warranty of the PolyvisionTM panel against electrical failure and/or delamination in material or product failure because of work-manship. Polytronix. Inc. is not liable for any damages or costs associated with improper storage, installation, hardware or usage of the PolyvisionTM panel.

Polytronix, Inc., in its discretion, may select either to replace the panels at no cost or refund all or a prorated portion of the customer cost based on the useful life of the Poly-visionTM panel. The purchaser agrees to assume all financial responsibility for removal of old panels and installation of new ones. Polytronix, Inc. is not liable for any labor costs associated with removal or installation of panels.

These remedies are the exclusive remedies available under this warranty. Polytronix, Inc. is not liable for any consequential, liquidated, exemplary, or other damages that might result from any product failure of the PolyvisionTM panel.

For warranty to be valid, panels must be in the OFF state (opaque)for a minimum of 4 hours every 24 hours.

Switching ON and OFF daily is encouraged to ensurethat the panels remain functional.

POLYVISIONTMSwitchable Privacy Glass

Polytronix, Inc. - PH: 972-238-7045 • FAX: 214-466-1280 www.polytronixglass.com

Polytronix Sales Order #Keep a copy of this warranty for your records

Customer Acknowledgement Signature:

By signing this warranty you acknowledge that you have read and understand its contents.

DOC DATE: 12/2013