installing a dhcp server role on windows server 2008 r2 in a home network
DESCRIPTION
- PowerPoint PPT PresentationTRANSCRIPT
Installing a DHCP Server role on Windows Server 2008 R2
in a home network.
This is intended as a guide to install the DHCP role on a Domain Controller and configure a DHCP scope, i.e. the range of IP addresses the server will lease to clients connected to your network.
You will need a static IP address on your server machine before proceeding to install the DHCP server role.
Click on Add roles on the Initial Configuration window
Install the DHCP role
Select the box next to DHCP Server
Click Next
Click Next
Click Next
Here the wizard will look for a network card with a static IP address.
There should be only one listed here. Make sure it is checked before proceeding.
Click Next
Enter the full domain name
Enter the IP address of your DNS server.
Click Next
Select WINS is not required for applications on this network
Click Add
Configure the range of IP addresses to lease to clients
Give the scope a name
Enter the starting and ending IP address rangeChoose Wired
Enter the full domain name
Enter the default gateway IP address
Click OK when you have entered everything above
Click Next
Disable IPv6
Click Next
Use current credentials
Click Next
Click InstallReview the summary to make sure everything is correct
The installation should only take a few minutes.