installing ibm tivoli directory server v6.0 (websphere partner gateway v6.1 - lab exercise)

7/31/2019 Installing IBM Tivoli Directory Server V6.0 (WebSphere Partner Gateway V6.1 - LAB EXERCISE)

1/19

Copyright IBM Corporation 2007 All rights reserved

WebSpherePartner Gateway V6.1 LAB EXERCISE

2007 May, 17 WebSphere Partner Gateway V6.1 Installing LDAP Server Page 1 of 19

Installing IBM TivoliDirectory Server V6.0

What this exercise is about ................................................................................................................................... 2What you should be able to do .............................................................................................................................2

Exercise Instructions ............................................................................................................................................. 2Part 1: Install Tivoli Directory Server V6.0 ............................................................................................................ 4Part 2: Create LDAP Server instance ................................................................................................................. 11What you did in this exercise .............................................................................................................................. 18


2/19

Copyright IBM Corporation 2007. All rights reserved

WebSphere Partner Gateway V6.1 Installing LDAP Server


What this exercise is about

The objective of this lab is to provide step by step instructions for installing and configuring IBM Tivoli DirectoryServer (LDAP).

List of software required for the student to complete the lab:

WebSphereApplication Server V6.1 Network Deployment Installed

WebSphere Partner Gateway Server V6.1 Installed

IBM DB2

UDB ESE 8.2 or higher installed

IBM Directory Server V6.0

What you should be able to do

At the end of this lab you should be able to:

Install and Configure Tivoli Directory Server (LDAP)

Exercise Instructions

Some instructions in this lab may be Windows operating-system specific. If you plan on running the lab onan operating-system other than Windows, you will need to run the appropriate commands, and use appropriatefiles ( .sh vs. .bat) for your operating system. The directory locations are specified in the lab instructions usingsymbolic references, as follows:


3/19




Reference Variable Windows Location Linux Location

C:\IBM\SQLLIB /opt/IBM/SQLLIB

C:\IBM\WPG61 /opt/IBM/WPG61

C:\IBM\WPG61\wpghubsimple /opt/IBM/WPG61/wpghubsimple

C:\IBM\WPG61\wpghubappsprofile /opt/IBM/WPG61/wpghubappsprofile

C:\IBM\WPG61\wpgappsdb /opt/IBM/WPG61/wpgappsdb

C:\IBM\WPG61\wpgmasdb /opt/IBM/WPG61/wpgmasdb

C:\IBM\WAS61 /opt/IBM/WAS61

C:\download\LDAP60\unzip /opt/download/LDAP60/unzip

C:\WPG61Labfiles /tmp/WPG61Labfiles

C:\temp /tmp

Windows users note: When directory locations are passed as parameters to a Java

program such asEJBdeploy or wsadmin, it is necessary to replace the backslashes with forward slashes to follow the Javaconvention.


4/19




Part 1: Install Tivoli Directory Server V6.0

This part of the lab demonstrates how to install and configure Tivoli Directory Server V6.0 on a Windowsoperating system.

____ 1. In order to install and configure IBM Tivoli Directory Server V6.0 an operating system user isrequired. The following procedure walks you through setting up the user. Although this procedureuses default names, you can substitute your own user and group names. Group and user namescannot exceed eight characters

__ a. Log in as the bcguser

__ b. Add bcguser to DB2ADMNS group.

__ c. Navigate to Start Settings Control Panel Administrative Tools ComputerManagement

__ d. In the left navigation panel of the Computer Management tool, expand the Local Users andGroups listed under System Tools

__ e. Click on Groups

__ f. In the right hand panel. Right click on DB2ADMNS group and select Add to Group

__ g. In the next dialog box that opens, click Add

__ h. Enter bcguser and click Ok

__ i. Click Ok on the DB2ADMNS Properties dialog box

____ 2. The following is the installation file needed to install the IBM Tivoli Directory Server V6.0

__ a. C83X4ML.zip

____ 1. Extract the above mentioned file to

____ 2. Ensure the disk structure contents extracted are as shown in the image below:


5/19




____ 3. Navigate to the itds directory and double click over setup.exe to launch the installer. The TivoliDirectory Server installation wizard prompts with the language selection panel

____ 4. Select English as language to be used for this installation wizard

____ 5. Click OK. The InstallShield Wizard starts and greets with Welcome page


6/19




____ 6. Click Next

____ 7. In the following panel, read the License Agreement and select the radio button next to I accept theterms in the license agreement to continue further


7/19




____ 8. Click Next

____ 9. In the following panel, the InstallShield Wizard lists the available applications related to TivoliDirectory Server setup. Review the listed applications carefully

Note:DB2 is part of the Tivoli Directory Server installation package. Pre-existing DB2 install supported byTivoli Directory Server V6.0 can also be used.

____ 10. Click Next


8/19




____ 11. In the following panel, click the Browse button for the Directory field and change the default targetinstall directory to C:\IBM\LDAP60

____ 12. Click Next

____ 13. In the following panel, ensure that all the features listed are selected except DB2 V8.2

Note: As DB2 is already installed and was detected by the Installation Wizard earlier, the check box next toDB2 V8.2 is not selected by default. Do not reselect as it already exist on this system.

____ 14. Click Next


9/19




____ 15. In the following panel, review the installation summary

____ 16. Click Next. All the features selected for installation are installed in sequence.

____ 17. Once the installation is complete and successful, the Tivoli Directory Server Instance AdministrationTool is started


10/19




____ 18. Click Finish when the installation is complete to close the Installation Wizard. The LDAP serverinstallation is complete


11/19




Part 2: Create LDAP Server instance

Note: As stated above, once the installation is complete, the IBM Tivoli Directory Server Instance

Administration Tool is started immediately prompting to do the necessary configuration. This tool can be alsostarted form the Start menu as shown below:

Programs Tivoli Directory Server V6.0 Instance Administration Tool

____ 1. In the IBM Tivoli Directory Server Instance Administration Tool panel, click the Create button. TheCreate new directory service instance dialog opens

____ 2. In the Create or migrate screen, ensure the radio button next to Create a new directory server

instance is selected (default)

____ 3. Click Next

____ 4. In the following Instance Details screen, provide the following Instance details:


12/19




__ b. User name : bcguser

__ c. Install location : C

__ d. Encryption seed string : directoryserverinstance

Note:The encryption string must use ISO-8859-1 ASCII and have between 12 and 1016 characters.

__ e. Instance description : LDAP Server V6(or provide your own description)

____ 5. Click Next

____ 6. In the following DB2 instance details screen, select bcguser for DB2 instance name from thedrop down list


13/19




____ 7. Click Next

____ 8. Accept the defaults on the following TCP/IP settings for multihomed hosts screen

____ 9. Click Next

____ 10. In the following TCP/IPport settings screen, accept the default port settings, but ensure the portsettings being used here are not used by another process on the system


14/19




____ 11. In the following Optional steps screen, ensure the check boxes next to Configure admin DN andpassword and Configure database are selected

____ 12. Click Next

____ 13. In the following Configure administrator DN and password screen, enter the followinginformation:

__ f. Administrator DN : cn=root

__ g. Administrator password : ldapadmin

__ h. Confirm password : ldapadmin


15/19




____ 14. Click Next

____ 15. In the following Configure database screen, enter the following information:

__ i. Database user name : bcguser

__ j. Password : bcg1user

__ k. Database name : LDAPDB

____ 16. Click Next

____ 17. In the following Database options screen, select the Database install location as C and ensurethe radio button next to Create a universal DB2 database is selected


16/19




____ 18. Click Next

____ 19. Double check the settings in the following Verify settings screen

____ 20. Click Finish

____ 21. Once the instance creation is successful, click OK over the task completed information dialog

____ 22. Click the Close button to exit the Create new directory service instance dialog

____ 23. Finally click the Close button to exit the IBM Tivoli Directory Server Instance AdministrationTool panel.


17/19




____ 24. Click Yes over the confirmation dialog.

____ 25. The LDAP instance creation is complete


18/19




What you did in this exercise

In the lab exercise, you have installed the LDAP server and created an instance.


19/19




Trademarks, Copyrights, and Disclaimers

The following terms are trademarks or registered trademarks of International Business Machines Corporation in the United States, othercountries, or both:

IBM CICS IMS MQSeries Tivoli

IBM(logo) Cloudscape Informix OS/390 WebSphere

e(logo)business DB2 iSeries OS/400 xSeries

AIX DB2 Universal Database Lotus pSeries zSeries

Java and all Java-based trademarks are trademarks of Sun Microsystems, Inc. in the United States, other countries, or both.

Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States, othercountries, or both.

Intel, ActionMedia, LANDesk, MMX, Pentium and ProShare are trademarks of Intel Corporation in the United States, other countries, orboth.

Other company, product and service names may be trademarks or service marks of others.

Product data has been reviewed for accuracy as of the date of initial publication. Product data is subject to change without notice. Thisdocument could include technical inaccuracies or typographical errors. IBM may make improvements and/or changes in the product(s)and/or program(s) described herein at any time without notice. Any statements regarding IBM's future direction and intent are subject tochange or withdrawal without notice, and represent goals and objectives only. References in this document to IBM products, programs, orservices does not imply that IBM intends to make such products, programs or services available in all countries in which IBM operates ordoes business. Any reference to an IBM Program Product in this document is not intended to state or imply that only that program productmay be used. Any functionally equivalent program, that does not infringe IBM's intellectual property rights, may be used instead.

Information is provided "AS IS" without warranty of any kind. THE INFORMATION PROVIDED IN THIS DOCUMENT IS DISTRIBUTED"AS IS" WITHOUT ANY WARRANTY, EITHER EXPRESS OR IMPLIED. IBM EXPRESSLY DISCLAIMS ANY WARRANTIES OFMERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT. IBM shall have no responsibility to updatethis information. IBM products are warranted, if at all, according to the terms and conditions of the agreements (e.g., IBM CustomerAgreement, Statement of Limited Warranty, International Program License Agreement, etc.) under which they are provided. Informationconcerning non-IBM products was obtained from the suppliers of those products, their published announcements or other publiclyavailable sources. IBM has not tested those products in connection with this publication and cannot confirm the accuracy of performance,compatibility or any other claims related to non-IBM products. IBM makes no representations or warranties, express or implied, regardingnon-IBM products and services.

The provision of the information contained herein is not intended to, and does not, grant any right or license under any IBM patents orcopyrights. Inquiries regarding patent or copyright licenses should be made, in writing, to:

IBM Director of Licensing

IBM Corporation

North Castle Drive

Armonk, NY 10504-1785

U.S.A.

Performance is based on measurements and projections using standard IBM benchmarks in a controlled environment. All customerexamples described are presented as illustrations of how those customers have used IBM products and the results they may have

achieved. The actual throughput or performance that any user will experience will vary depending upon considerations such as theamount of multiprogramming in the user's job stream, the I/O configuration, the storage configuration, and the workload processed.Therefore, no assurance can be given that an individual user will achieve throughput or performance improvements equivalent to the ratiosstated here.

(C) Copyright International Business Machines Corporation 2007. All rights reserved.

Note to U.S. Government Users - Documentation related to restricted rights-Use, duplication or disclosure is subject to restrictions set forthin GSA ADP Schedule Contract and IBM Corp.

installing ibm tivoli directory server v6.0 (websphere partner gateway v6.1 - lab exercise)

Documents