instm unipi - cnr – unipi • localisation(s) instm administrative offices of instm are located at...
TRANSCRIPT
INSTM – UNIPI
• Localisation(s) INSTM administrative offices of INSTM are located at Florence (http://www.instm.it) UNIPI Research Unit is located in Pisa (http://materials.diccism.unipi.it
INSTM Consortium of Italian Universities for the Science and Technology of Materials, groups 45 Italian Universities where research on Materials is carried out.
The group of Prof. Lazzeri, INSTM- Research unit of Pisa University, is active in the chemical and physical characterisation of nanomaterials, polymers, and ceramics as well as in processing, composite, production, microwave processing, green polymeric materials from renewable and sustainable matters, development of new tough and stiff nanocomposite materials.
Key figures
The Research Unit from INSTM-Pisa University consist of 2 full Professor, 2 researcher, 1 technicians , 1 Post Doc, several PhD and Master Degree students
PROF. ANDREA LAZZERI Full Professor University of Pisa
Department of Civil and Industrial Engineering
Products/services/R&D axis activity… Polymer processing (laboratory and pilot scale) and characterization; Green synthesis polyurethane, Nano materials, Ceramics . Materials characterization.
Background/experience highly skilled in nanoparticles production of precipitated calcium carbonate coated with fatty acids and characterization of fillers for the application into both traditional petroleum-based polymers and PLA:…as well as in the production of nanocomposite and composites with biodegradable polymeric matrices (PHB, CDA, PLA, Ecoflex, etc) and recycled polymers. Study of materials properties: thermal, thermo mechanical, mechanical (tensile, impact, creep, fatigue), structure and environmental impact.
PROCESSING AT UNIPI Haake mini extruder
and minijet
COMAC Extruder
• Thermal Properties (Differential Scanning Calorimetry, Dynamic Mechanical Thermal Analysis GABO)
• Mechanical Properties: Instron, Impact, Fatigue
• FTIR, GS, .... etc
INSTRUMENTS
FORBIOPLAST, Forest Resource Sustainability through Bio-Based-Composite Development KBBE-2007-Large , Coordinator, concluded 30.06.2012 Star Project
Prof. Andrea Lazzeri Coordinator of
INNOVATION CONVENTION BRUXELLES 5-6th December 2011
Bio-based Polymers and Composites of
FORBIOPLAST 27-31 Maggio 2012
www.forbioplast.eu/
Tomato yarns
Pots
Packaging Spoiler
Soft Polyurethane
Car seat
Rigid Polyurethane
Fertilizer Sticks
Materials produced
T-node
WHEYLAYER Whey protein-coated plastic films to replace expensive polymers and increase recyclability, BSG Research for the benefit of specific groups, concluded 31.10.2011
WHEYLAYER2 “Barrier biopolymers for sustainable packaging” FP7-SME-2012 Activity 2.3: Demonstration Activity, started: 01.08.2012
Prof. Andrea Lazzeri Partner of:
www.wheylayer.eu/
BIOBOARD Development of sustainable protein-based paper and paperboard coating systems to increase the recyclability of food and beverage packaging materials Research for the benefit of SME AGs, iniziato 01.11.2013
Prof. Andrea Lazzeri Partner of:
www.bioboard.eu/
DIBBIOPACK Development of injection and blow extrusion molded biodegradable and multifunctional packages by nanotechnology improvement of structural and barrier properties, smart features and sustainability “ NMP2011.Large, started 01.03.2012 Collaborative Project
Research activity:
Formulation based on Poly lactici acid, selection of plasticizers and nucleating
agents, crystallization, improvement of thermal stability and mechanical properties.
Processing and characterization of nanocomposites (nanoclays, graphene, nano
fibres).
Scale up production with industrial extruder Comac.
Prof. Andrea Lazzeri Partner of:
www.dibbiopack.eu/
Collaborative Project
Small or medium-scale focussed research projects - Specific International Cooperation Actions
(SICA) to promote the participation of emerging economies and developing countries: Latin
America.
OLIPHA “A novel and efficient method for the production of polyhydroxyalkanoatepolymer-based packaging from olive oil waste water” NMP2011.Small , iniziato 01.06.2012
Research activity:
Characterization of the polymers produced. Selection of plasticizers, study of
crystallization. Production of composites and nanocomposites.
Prof. Andrea Lazzeri Partner di:
www.olipha.eu/
HELM High-frequency ELectro-Magnetic technologies for advanced processing of ceramic matrix composites and graphite expansion, Large NMP.2011.4.0-1 , iniziato 01.06.2012
Prof. Andrea Lazzeri Coordinator of:
www.helm-project.eu
Prof. Andrea Lazzeri Scientific coordinator of:
N-CHITOPACK - Sustainable technologies for the production of biodegradable materials based on natural chitin-nanofibrils derived by waste of fish industry, to produce food grade packaging, Research for the benefit of SME, iniziato 01.11.2013
http://www.n-chitopack.eu/
Research activity:
Preparation of film based on chitin nano fibres. Characterization of thermal,
mechanical, and structural properties. Biodegradation, sustanability and LCA.
PERFORMANCE Development of Personalised Food using Rapid Manufacturing for the Nutrition of elderly Consumers, iniziato il 01.11.2012
Research activity:
Personalised packaging
concept, for food to be re
heated in microwave oven.
Prof. Andrea Lazzeri Partner of:
www.performance-fp7.eu/
EVOLUTION “The Electric Vehicle revOLUTION enabled by advanced materials highly hybridized into lightweight components easy to be integrated and dismantled in a reduced life cycle cost logic Integrating Project - GC.NMP.2012-2, started 01.11.2011
Prof. Andrea Lazzeri Partner of:
Research activity:
Composites and Nanocomposites for application in automotives.
• Technical contact(s)
– Lazzeri, Andrea, [email protected], 0502217807
– Cinelli, Patrizia, [email protected], 0502217869
– Beatrice Coltelli [email protected], 0502217856
– Anguillesi Irene [email protected], 0502217880
• Administrative & Financial contact(s)
– Bachechi, Letizia, [email protected], 0502217825
CONTACT PERSONS