instruction 2.3 mac computer time synchronization method 宽
TRANSCRIPT
L1000 Portable Voice RecorderInstruction
1. Charging
1 x L1000 Digital Voice Recorder Package List:
1 x TYPE-C Cable 1x Wired-Control Earphone1 x User Manual 12 Months After-Sales Service
Picture 1 Charging by computer or data transfer
Please use the supplied usb cable to connect with computer or wall adaptor for charging.
V1
6 7 8 9
41 2 3
Notice: Please make sure the recorder switch OFF before connecting with computer
We recommend you using the supplied usb cable to connect the recorder with your computer for charging or data transferring. And please use the computer system’s Media Player to play the recording files.
Media player
2. Time synchronizationPlease set the recorder as your local time before using.
2.1 Windows-SetTimeStep 1, Connect it with a Windows computer and enter into the recorder removable disk to find the “SETTIME”file.
Step 2, Double click the procedure tool “Set Time. exe”, then you will see a notice pop-up “Success on setting device time (Date and time)”. That means you have set the recorder time the same as your computer local time.Notice: As the recorder will reset to factory time when out of battery. So you need to set the time again after fully charged.2.1.1 Please set time first. Connect it into a computer and open the disk to find the “SETTIME” file. 2.1.2 Then double click the “SetDigitRecorderTm.exe” procedure tool, it will come up the notice “Success on setting device time (Date and time)”.
2.1.3 After that, the new recording file’s time will be correctly according to the time you set.
NOTE: Every time the device low battery shutdown, the device time will reset. Please set the time again on the computer!
Success
YES
Success on setting device time 2020-09-12 14:50:44!
2.2 MacOS-SetTimeIf your computer is Mac computer, then please click the file“Time.txt”to modify the current local time (format: year, month, day, hour, minute, second) and save this file. After that, please copy the modified file outside the RECORD folder and disconnect with computer.
At last, the recorder time will be set to your local current time successfully when you turn on the recorder again.
2.3 Mac computer time synchronization methodOpen “time.txt”, modify the current time (format: year, month, day, hour, minute, second) and save. Copy the "time.txt" file outside the RECORD folder and unplug the device. When you turn on the recording again, the set time will be displayed.
year month day hourr minute second
2020 - 05 - 06 09 . 47 . 40
3. Buttons Introduction
Lanyard hole
MicIndicatorRecord/Power OnSave/Power OffVoice Activated Recording On
RESETType-C interface
宽80*高90mm
4.2 Save Record:
4.3 Voice Activated Recording:
4.4 Notice:
VOR20210427010030
The voice activated recording file name will be named by ”
Year/Month/Date/Time/Minutes/Seconds”, eg. VOR20210427010030
The voice activated sensitivity level is 35dB
Please push the power switch to position, the red led light will flash 2 times and go off, then the recording file will be saved successfully.
Please push the power switch to ∨ position,the recorder indicators will be light on, then the green led light will flash 3 times and go off, it will start to voice activated recording. After finish recording, push the power switch to position again, the recording file will be saved successfully after the red led light flashes one time and go off.
1) The recorder will save the recording file automatically when low battery or memory full.2) Please backup all your recording files in case of losing them.
3) The recorder will save a recording file at the max length of 5 hours recording time automatically. If you continuous record 6 hours, then the recorder will auto save it in 2 recording files, one is 5 hours length time recording file, another is 1 hour.
5. Playback
Previous/Volume up
Next/Volume down
Pause/ Switch mode
5.1 Play Recording File
5.2 Music Playback
Insert the supplied wired-control earphone and then push the power switch to ●/∨ position for playing the recording files.
Insert the supplied wired-control earphone and then push the power switch to ●/∨ position. Then long press the pause button for 2 seconds to switch it into Music playing mode so as to play music. Long press the pause button for 2 seconds again to switch it back to Record playing mode.
5.3 Adjust Volume
6. Indicators
Long press +button to volume up and long press - button to volume down. It has been the max volume if you hear the Beep prompt sound.
Item
Power on
Explanation
Red and blue indicators light on for 0.5 seconds
Normal recording Red indicator flashes 3 timesand go out
Voice activated recording Green indicator flashes 3 times and go out
Save recording/Power off Red indicator flashes and go out
Charging Red indicator always light on
Fully charged Blue indicator always light on
Low battery Red indicator flashes 10 times and go out
Memory full Red and blue indicators flashes 20 times and go out
7. Technical Specifications:
USB 2.0Recording Format
Type-C interface
Dimension 72*27*22MM
WAVBit Rates 192kbps 24KHz
Weight 62.5G
Music Formats MP3/WAV/WMAContinuous Recording Time About 600 hours after fully
chargedMusic Playing Time About 221 hours after fully
charged
Support Windows98 and later version, XP, Windows 7 /8 /10/mac
Battery 3.7V 3000mAh Rechargeable 18650 Lithium Battery
Memory 8G/16/32GB
Charging Input 5V/1A
Charging Time About 8-10 hours
5
Power On and Start recording
Power Off and Save recording file
Power On and in voice activated recording mode
4. Recorder Function
4.1 Start Record:Please push the power switch to ● position, the recorder indicators will be light on, then the red led light will flash 3 times and go off, it will start to record. The indicators won’t light on during recording.
REC20210427005932The recording file name will be named by ”Year/Month/Date/Time/Minutes/Seconds, eg. REC20210427005932