instruction manual for maxi-gun

7/30/2019 Instruction Manual for Maxi-Gun

1/7

Instruction manual

Copyright Strmme AS 2004-

Maxi-Gun


2/7

Norway

Stromme AS

Phone: +47 67 52 60 60

Fax : +47 67 52 60 50

E-mail : [email protected]

United Kingdom

Stromme UK Ltd

Phone: +44 1273 321212

Fax : +44 1273 321171

E-mail: [email protected]

Germany

Hoff Ships Service GmbH

Phone: +49 40 3097 880

Fax : +49 40 3097 8840


France

Stromme ITS France

Phone: +33 328 593 997

Fax : +33 328 636 637


Singapore

Stromme Ships Service (S) Pte.Ltd.

Phone: +65 626 11600

Fax : +65 626 11500


STROMME OFFICES:

Copyright Strmme AS 2004-

No part of this manual may be duplicated by mechanical or electronic means without the express written

permission from Strmme AS.

All particulars in this manual are specified to our best knowledge, but without guarantee.

We reserve the right to make changes to information on hardware and firmware documentation at any time

without previous announcement.

We are thankful for any criticism and suggestions.

The Netherlands

Stromme-Madsen BV

Phone: +31 10 48 68 911

Fax : +31 10 42 82 798


Poland

Stromme ITS Poland Sp. z o.o

Phone: +48 58 623 6145

Fax : +48 58 664 3737


Germany

Stromme ITS Germany GmbH

Phone: +49 40 72 24 029

Fax : +49 40 72 29 233


Spain

Crosscomar S.L.

Phone: +34 956 675 200

Fax : +34 956 675 118


Malaysia

Nautilus Sout East Asia Sdn. Bhd.

Phone: +60 7 512 5693 /4 /5

Fax : +60 7 512 5696



3/7

MAXI-GUN

3

Strmme AS, Nesveien 15, PO Box 31, N-1305 Haslum, Norway, Ph +47 67 52 60 60, Fax +47 67 52 60 50, E-mail: [email protected]

Table of contents

Technical data........................................................................4

Instruction for use.................................................................6

Drawing and part list.............................................................7


4/7

Ph +47 67 52 60 60Fax +47 67 52 60 50

Nesveien 15, PO Box 31N-1305 Haslum, Norway

Part of Stromme ASA

Air/water nozzle

Technical Data

MAXI - GUN

Cargohold cleaning

equipment

The picture shows the Maxi-Gun complete with accessories.

1 Pc : Air/water cleaning nozzle.

Maxi-Gun complete mounted on

stand with air valve, air and water

couplings.

1 Pc : Y-coupling with pressure gauge.2 Pcs: Hatch protection 21/2 w/coupling.

2 Pcs: Water hose 21/2x 30 mtr. w/coupl.

2 Pcs: Water hose 21/2 x 15 mtr. w/coupl.

1 Pc : PVC-air hose 1 x 30 mtr. w/coupl.

Over the years, we have beenbuilding bigger and bigger ships.Parallel with the increasing size andheight of the holds, the time availablefor preparing the holds for the next

cargo has been reduced.

The Maxi-Gun will increase theclean-ing effect by 5-10 times when com-pared to normal water nozzles. Thishas been made possible by an accu-rate venturi system, the use of com-pressed air and maximum amounts ofwater. Even rustscales are loosenedand flushed away, by using the Maxi-Gun.

Scope of Supply Description

Technical Data

Effective range : 20-40 mtr

Estimated water flow : 80-120 m3/h

Recomm. water pressure : 7-10 bar

Water connection : 2 x 21/2

Max.air flow : 5 m3/min

Recommended air press. : 7-10 bar

Air connection : 1

3201-21000


5/7

MAXI-GUN

5


Equipment:

The Maxi-Gun consists of an unique designed series of air and water nozzles with 2 special

swivel units in the vertical and horizontal positions. It is designed to give the highest and strong-

est solid water jet possible. It can be easily operated by one man using the normal service mains

available on most Bulk Carriers and OBO type vessels. (See tech. data).

Shipped in 5 easy to assemble pieces, it can be put together in just a few minutes.

Safety:

For safety, the Maxi-Gun incorporates three easily mounted water ballast tanks.

These form a weighted, self-supporting stand for the nozzle and swivel units. When filled with

water ballast, these tanks enable the equipment to meet the recoil forces.

With the ballast tanks full, one man can easily and safely operate the equipment from a standing

position, controlling jet direction and cleaning pattern from the nozzle handle.

Cleaning:

With the Maxi-Gun you will remove rust scale and difficult deposits such as cargoresidue etc.

Keep heavy rust scales and deposits free of the bilges and use maximum suction capacity.

After the Maxi-Gun cleaning and removing of rust and cargo-deposits from tank-top, you may

start the chemical treatment with Spray Foam System at any time.


6/7

MAXI-GUN

6


Instruction for use

1) FIT THE WATER BALLAST TANKS (6) TO THE CROSS (7) AND SECURE THEM

WITH A LOCKING PIN.

2) FILL THE BALLAST TANKS WITH WATER.

3) MOUNT THE NOZZLE ON THE NOZZLE FLANGE WITH THE SHORT BOLTS.

4) ADJUST THE VERTICAL FLANGE (3) ON THE 4 BOLTS UNTIL IT IS EASY TO MOVE

THE NOZZLE WITH THE HANDLE (5). DO A FINAL ADJUSTMENT WHEN WATER

PRESSURE IS ON .

5) ADJUST THE HORIZONTAL FLANGE (2) IN THE SAME WAY VERTICALLY.

6) CONNECT THE AIRHOSE TO THE AIRCONNECTION (10)

7) CONNECT THE Y-COUPLING (II) TO THE WATERCONNECTION (9) AND BOTH

WATERHOSES THE Y-COUPLING

THE MAXI-GUN IS NOW READY FOR USE

WARNING!!

PLEASE NOTE THAT MINIMUM ONE PERSON MUST HOLD THE EQUIPMENT IN THE

CARGOHOLD WHEN WATER AND AIRPRESSURE IS ON. ALSO ONE PERSON MUST BE

ON DECK, AT ALL TIME, AND READY TO SHUT DOWN THE AIR AND WATER PRESSURE.


7/7

MAXI-GUN

7


1. FIXED FLANGE

2. HORIZONTAL JOINT

3. VERTICAL JOINT

4. NOZZLE FLANGE

5. HANDLE

6. 3 PCS WATER BALLAST TANKS

7. CROSS

8. WHEEL SCREW

9. WATER CONNECTION

10. AIR CONNECTION

11. Y-CONNECTION FOR WATER HOSES

Drawing and part list

instruction manual for maxi-gun

Documents