instruction manual - holman industries...ws5029 weather station instruction manual.indd 6 2/07/12...

Instruction Manual

Product Code: WS5029

WS5029 Weather Station Instruction Manual.indd 1 2/07/12 3:51 PM

Table of Contents

General Information PackageContents 1TechnicalDetails 1OutdoorSensor 1

Glossary 2

Installation - Weather VaneInstallingtheBatteries 3MountingtheMainUnit 4MountingtheWindSpeedSensor 4MountingtheWindDirectionSensor 4MountingtheRainSensor 5MountingtheHydro-ThermoSensor 6MountingallSensorstoStainlessSteelMast 7 Initial OperationManualTimeSet-up 8DailyAlarmSet-up 9DailyAlarmon/off 9SnoozeFunction 912/24HoursMode 10C/FTemperatureDisplay 10Max./Min.fortheIndoor/OutdoorTemperatureandHumidity 10TemperatureAlerton/off 105WeatherForecast 11WindSpeedinMph.kph(0-256kmh) 11WindDirection 11RainfallDisplay 11Illumination 12MoonPhaseDisplay 12LivingSpaceHumidity 12LowBatteryConditionDisplay 12RFConnectiontotheOutdoorSensor 12

Notes 13

Warranty BackCover


General Information

ThankyouforpurchasingtheHOLMANiWeather-WeatherStation,Pleasereadtheoperatinginstructionscarefullytofamilarizeyourselfwiththefeaturesandmodesofoperationbeforeusingtheinstrument.

Package ContentsCarefullyunpackandremovethecontents:• 1xweatherstationmainunit• 1xstainlesssteelmast• 1xthermo-hygrosensor• 1xrainsensor

Technical Details• Sixkeys:MODE, +, -, ALARM, ALERT,SNOOZE/LIGHT• Timedisplayin12/24format• Continuousperpetualcalendarupto2099• DisplayofDate,MonthandDayofweek• Dayofweekdisplayavailablein7languages,i.e.German,English,Italian,French,Spanish,Danish.• Dualalarmwithsnoozefunction(5minutesalarminterruption)• 5weatherforecast:sunny,partlysunny,cloudy,rainy,storm.• Barometerandbaranddataof12hourshistoryforairpressure• Indoor/outdoortemperatureandhumiditywithtrend• Max./min.oftemperatureandhumidity• Thermometermeasuringrangeinside:°Cto+50°C,outside-20°C~60°C• Temperaturedisplayelectivein°Cor°F• Temperaturealertforindoorandoutdoor• Livingspacehumidity• Moonphase• Windspeedinmph/kmh,windspeed0~256kmh• Winddirectionin16directions• Rainfallinmmandinchanddisplayof1hour,24hour,TOTAL.Rainvolume(0~999.9MM)• Lowbatteryindication• BluebackgroundilluminationLED.• Mainunitbatteries:2xAABatteries1.5V(notincluded)

Outdoor sensor:• Frequency:433MHz• Transmissionrange:100metersinopenarea.

General Information PackageContents 1TechnicalDetails 1OutdoorSensor 1

Glossary 2

Installation - Weather VaneInstallingtheBatteries 3MountingtheMainUnit 4MountingtheWindSpeedSensor 4MountingtheWindDirectionSensor 4MountingtheRainSensor 5MountingtheHydro-ThermoSensor 6MountingallSensorstoStainlessSteelMast 7 Initial OperationManualTimeSet-up 8DailyAlarmSet-up 9DailyAlarmon/off 9SnoozeFunction 912/24HoursMode 10C/FTemperatureDisplay 10Max./Min.fortheIndoor/OutdoorTemperatureandHumidity 10TemperatureAlerton/off 105WeatherForecast 11WindSpeedinMph.kph(0-256kmh) 11WindDirection 11RainfallDisplay 11Illumination 12MoonPhaseDisplay 12LivingSpaceHumidity 12LowBatteryConditionDisplay 12RFConnectiontotheOutdoorSensor 12

Notes 13

Warranty BackCover

• 1xwindspeedsensor• 1xwinddirectionsensor• Mountingscrews• Stainlesssteelaccessoryforfixingthemast.

**Actualdistancemaybevarieddependingupontheenviroment,itwillbeshortenedifwithinterference,suchasconcretewalletc.• Batteries:2xAABatteries1.5V(notincluded)

1


Glossary

1.WeatherForecast2.Livingspacehumidity3.Indoorhumiditytrend4.Indoorlowbattery5.Rainfall6.AirPressure7.Winddirection

8.Date9.Windspeed10.Month11.Dayofweek12.MoonPhase13.Dualalarm14.Time

15.RCCsymbol16.Summertime17.Outdoorlowbattery18.Outdoorhumidity19.Outdoorhumiditytrend20.Indoorhumidity21.Outdoortemperature

22.Outdoortemperaturealert23.RFsymbol24.Indoortemperaturealert25.Outdoortemperaturetrend26.Indoortemperature27.Indoortemperaturetrend

A = MODE B = + C = - D = ALARM E = ALERT F = SNOOZE/LIGHT

2


Installation - Weather Vane

Installing the Batteries• Openthemainunit‘sbatterycoverlocatedatthebackoftheunitandinsert2xAAbatteries

intothebatterycompartmentandclosethebatterycover.

• Pullawaytheshower-proofcaseofthethermo-hrgrosensortorevealthe2sockets.

(forthewindsensorandrainsensor)

• Connecttheattachedcables:

1.Cablefromwindspeedsensorinsertintothesocketofwinddirectionsensor,

2.Cablefromwinddirectionandcablefromrainsensorstothecorrespondingsocketsofthe

thermo-hygrosensorbyclickingthemintoplace.Makesurethatrainandwindcablesare

connectedtothecorrectsockets.

• Firstinsertthebatteriesofmainunit,theninsert

thebatteriesoftheoutdoorsensorin3minutes

afterthemainunitispoweredon,toassureof

thesensordatareceivedwell.Incaseofthe

outdoorsensordatareceivedfailure,please

pressALARMkeyformorethan3secondsto

synchronizetheRFsignal.

• Everytimethebatteriesarereplaced,themain

unitwillloosealltheweatherdata.

• Everytimethebatteriesarereplaced,

thethermo-hygrosensorwillsychronizewiththe

mainunitagain.YoumustpresstheALARM

keyformorethan3secondsto

synchronizetheRFsignal.

•Othersituationoffailure

ofRF,pleaseresetthe

sensortoandpress

ALARMreceiveagain.

3



Mounting the Main UnitThemainunitcanbeplacedontoanyflatsurfaceorwallmountedatthedesiredlocationbyhanginghole.

Mounting the outdoor sensor onto the stainless steel mastForaccurateresults,theoutdoorsensormastshouldbesecurelymountedontoahorizontalsurfaceandinanopenareaawayfromtreesandothercoveringswhererainfallorwindspeedmaybereducedtocauseinaccuratereading.

1. Mountingthewindspeedsensortothefirstplasticbracket:firstcheckthewind-fancanrotatefreelybeforefixing.Thewindspeedsensorshouldnowbemountedontothebracketprovidedtoallowthewindtotravelaroundthesensorunhinderedfromalldirections.pleasefollowthebelowdisplay:

2. Mountingthewinddirectionsensortothefirstplasticbracket:firstcheckthewinddirectionsensorbeforefixing,thereisonecablefromwindspeedsensor,pleaseinsertitintothesocketunderthewinddirectionsensor.pleasefollowthebelowdisplay:

4



3. Mountingtherainsensortothesecondplasticbracket:thereareverticalengravedlinesatthebottomedgeoftheroundcoverandthesensorpart,youonlyneedadjustthetwolinesintooneposition,thenturnclockwise,therainsensorpartswillbeconnectedwell,thenfixthemwith4screwsontotheplasticbracket(don’tuseonly2screws)pleasefollowthebelowdispay:

5



4. Mountingthethermo-hygrosensortothethirdplasticbracket:oncethewindsensorsandrainsensorarefixedontothebracket,connectthecablestothecorrespondingthermo-hygrosensorsocketswiththeplugs,sothatdatacanbetransmittedtothemainunit,thenputthehouse-likecoverontothethermo-hygrosensor,pleasefollowthebelowdisplay:

Note: please don’t put in or take off the plug very offen,or put the plug outside in the air so long time to avoid any damage of the plug , if so, there will be bad connection.

6



5. Mountingallthesensorsontothestainlesssteelmastandfixthewholepartsatoutdooropenarea.Note: please make sure all the cables are connected well into the sockets.

7


• Afterinsertingthebatteries,themainunitwillconnectwiththeoutdoorsensorbyRFsignal.

TheRFsignalsymbolattheoutareawillflash.

• Thisprocesstakesabout3minutes.Thenthedisplayshowstheoutdoortemperature

/humidity/windspeed/winddirection/rainfall,incaseoffailureofreception,please

press“ALARM” formorethan3secondstoreceiveagain.

• ThereisflashingRCCsymbolinthetimeareaafter3minutesofoutdoorRFreception.

Pleasehold“+” and “-”togetherforcancellingthissymbolinAustraliamarket

(this is very important)

Manual time set-up

(Please always hold “+” and “-” together for cancelling a flashing RCC symbol at the time area when you are ready to set-up in Australia)

• Pressandholdkey“MODE”for3seconds.• The12/24hourflashing.Use“+”and“-”toselect• Press“MODE”toconfirm.• Thedisplayforthetimezoneisflashing.FortheAustraliantimezonepleaseleaveas“00”.• Press“MODE”toconfirm.• TheDM/MDflashing,Use“+”and“-”toselect.• Press“MODE”toconfirm.• Thedisplayfortheyearisflashing.Use“+”and“-”toselecttheyear.• Press“MODE”toconfirm.• Thedisplayforthemonthisflashing.Use“+”and“-”toselectthemonth.• Press“MODE”toconfirm.• Thedisplayforthedateisflashing.Use“+”and“-”toselectthedate.• Press“MODE”toconfirm.• Thedisplayforthehourisflashing.Use“+”and“-”toselectthehour.• Press“MODE”toconfirm.• Thedisplayfortheminutesisflashing.Use“+”and“-”toselecttheminutes..• Press“MODE”toconfirm.• Thelanguageselectionforthedisplayoftheweekdaysisflashing.Use“+”and“-”toselectthelanguage.• Press“MODE”toconfirm• TheC/Ffortemperatureflashing,Use“+”and“-”toselect.• Press“MODE”toconfirm.• Thehpa/inhgforairpressureflashing,Use“+”and“-”toselect.• Press“MODE”toconfirm.• Themm/inchforrainfallandkmh/mpgflashing,Use“+”and“-”toselect.• Press“MODE”toconfirm.

Initial Operation

8


Information:• Theclockautomaticallychangesfromset-upmodetotimedisplaymodeifnokeysare

pressedfor20seconds.

Daily alarm set-up• Press“MODE”toswitchfromtimedisplaytoA1display

• Pressandholdthekey“MODE”for3seconds,theflashingalarmtimeareshown

• Thehourdisplayofthealarmtimeisflashing.Use“+” and “-”toselectthehour.

Press“MODE”toconfirm.

• thenfollowtheminutes.Use“+” and “-”toselecttheminutes,

Press“MODE”toconfirm.

• ThesamesettingasforA2.

Daily alarm on/off• 1stpress“ALARM”toactivatethealarm1withalarmsymbolshowing.

• 2ndpress“ALARM”cancelthealarm1,thenactivatethealarm2withalarmsymbolshowing

• 3rdpress“ALARM”toactivatethealarm1andalarm2withalarmsymbolshowing.

• 4thpress“ALARM”cancelallthealarms

Information:• Theclockautomaticallychangesfromset-upmodetotimemodeifnokeysarepressed

for20seconds.

• Thealarmsoundsfor2minutesifnokeyispressedtostopit.

Snooze functionToactivatethesnoozefunction,followthestepsbelow

• Pressthekey“SNOOZE/LIGHT”,whilethealarmsounds,toactivatethesnoozefunction.

• Ifthesnoozefunctionisactivated,alarmsymbolisflashing.

• Thealarmrepeatafter5minutes.

• Thesnoozefunctioncanbestoppedbypressinganykey.

Initial Operation

9


Initial Operation

12/24 hours mode• Thetimedisplaycanbein12(AM/PM)or24hoursmode,pleasefollowthemanualset-uptoselect

°C/°F temperature display• Thetemperaturedisplaycanbein°Cor°F,pleasefollowthemanualset-uptoselect.

Max./ Min. for the indoor/outdoor temperature and humidity• Press“+”fordisplayingofindoor/outdoormax./min.oftemperatureandhumidity,

hold“+”formorethan3secondstoclearupthemax./min.

Temperature alert set-up• Press“ALERT”formorethan3seconds,theupperlimitofinsidetemperatureisflashing,

use“+”and“-” tosetthemaximumalerttemperature.

• Press“ALERT”,thelowerlimitofinsidetemperatureisflashing,use“+”and“-”toset

theminimumalerttemperature.

• Press“ALERT”,theupperlimitofoutsidetemperatureisflashing,use“+”and“-”toset

themaximumalerttemperature.

• Press“ALERT”,thelowerlimitofoutsidetemperatureisflashing,use“+”and“-”toset

theminimumalerttemperature.

• Whenthealertisactivated,thealertsymbolwillbeshown.

Temperature alert on/offPressandholdthekey“ALERT”tosetthetemperaturealertonoroff.

• Alerton:Temperaturealertsymbolshownindisplay

• Alertoff:Temperaturealertsymbolgoesout.

Information• Theset-upprocesscannotbecompletedifthemaximumtemperatureselected

islowerthantheminimumselectedtemperature.

• Theminimumtemperatureselectedmustatleastbe1°Cbelowthemaximum

selectedtemperature.

10


Initial Operation

5 Weather forecast

Sunny Slightly Sunny Cloudy Rainy Storm

Remarks:astheweatherisforecastedbyairpressureonly,

Thedisplaywillhavediscrepancywiththeactualweathersometime.

Barometer and bar and data of history for the past 12 hour of air pressure.

AirpressurecanbeinhPaandinHg,andhavebarofthepast12hours.

Wind speed in mph/kmh ( 0~256kmh)• Thewindspeedcanbeshowninmphandkmh,pleasefollowthemanualset-uptoselect

mph/kmh,thedisplayofthespeedisupdatedincaseofthesensorupdatedevery1minitues.

Wind direction • Therewillbe16winddirections,thedisplayofthedirectionisupdatedincaseofthesensor

updatedevery1minutes

Rainfall display ( 0~999.99mm)• Rainfallcanbeshowninmmandinch,pleasefollowthemanualset-up

toselectthemm/inch.

• Press“-”toshowtherainfallin1hour,pressagain24hours,thenTOTAL.

• Press“-”formorethan3secondstoclearupthevolumaccordingly,suchasifshowing1

hour,clearupthedatain1hour,othersunchanged,ifshowing24hours,

clearupthedatain24hour,othersunchanged.

• Themax.oftherainfallisupto999.99mm(99.99inch),thedisplayisflashingincase

ofthemax.,youhavetoclearupthedatabyhand,otherwise,thedatacannot

beupdatedanymore.

11


12

Initial Operation

Illumination• Pressthekey“SNOOZE/LIGHT”toactivatethedisplayilluminationfor8seconds.

Moon phase displayThe weather station uses saved data to show the moon phase

Low battery condition displayTheweatherstationdisplaysthelowbatteryconditionsymboltoremindthebatteriesoftheweatherstationortheoutdoorsensorneedtobeexchanged.

• Weatherstationlowbatteryconditiondisplay:withinindoorareaofthedisplay

• Outdoorsensorlowbatteryconditiondisplay:intheoutdoorareaofthedisplay

RF connection to the outdoor sensor• Pressandholdthekey“ALARM”for3secondstosearchforoutdoorsensor,theRFsignal

symbolattheoutsideareawillflashingwhentryingtoconnect.RFreceptionisweaker

inroomswithconcretewalls(e.g.inthebasement)andinofficebuildings,thedistancewillbe

shortenifhaveinterference.Forextremecases,pleaseputthemainunitnearawindow.

ABCDEFGH

A: New moon B: increasing crescent C: First half

D: increasing 3/4 E: Full moon F: decreasing 3/4

G: Last half H: decreasing crescent

Living space humidity

Theweatherstationusessaveddatatodeterminethehumidityinthelivingspaceandshowstherespectivesymbols.


13

Notes


Warranty

Shouldyouhaveanyquestionsaboutthisproductoritsoperationpleasetelephoneourcustomerservicehelplineon1300 716 188.

Holmanoffera1 yearreplacementwarrantyfromtheoriginaldateofpurchase.

Toclaimwarrantytheproductmustbereturnedwithacopyoftheoriginalreceipt.

Wewillhonourallstatutoryguaranteesthatthisproductisofacceptablequality(includingthatitisfitforpurpose).

HOLMAN INDUSTRIES47WaltersDrive,OsbornePark,

WesternAustralia6017.Tel:61 8 9204 1011Fax:61 8 9204 1013Web:www.holmanindustries.com.au


instruction manual - holman industries...ws5029 weather station instruction manual.indd 6 2/07/12...

Documents