1

Age: 14+ INSTRUCTION MANUAL

VR DRONE POWER +

Thank you for purchasing our VR DRONE POWER +.Please read the instructions carefully to know in detail the drone and thus be able to fly safely.Keep this instruction manual for possible future reference.

1. This aircraft is not a toy. It is a device that integrates electronics and precision mechanics with aerodynamic design and emitting high-frequency signals. It is necessary to manipulate it (mounting and dismounting) correctly in order to prevent any accident. The owner shall piloting it and control it always meeting the minimum safety standards.

2. JUGUETRÓNICA is not responsible for possible damage that may be caused to the owner derived from a misuse or mishandling.

3. This aircraft requires certain knowledge of driving and flying experience and to be older than 14 years.

4. Once purchased the product, JUGUETRÓNICA is not responsible for the security of the product or by its surroundings while being piloted by its owner.

5. If you detect any malfunction, contact the store where you purchased the drone.

IMPORTANT NOTICE

SAFETY PRECAUTIONS AND WARNINGS

BOX CONTENTS

This drone has dangerous parts, so it is important to take into account the following recommendations:

You should always have eye contact with your drone, not exceeding in any case the 120m high.While it is not necessary to be official pilot you should always fly safely.You can only fly your drone in areas suitable for this, as flight camps or unpopulated areas.Damage caused by the drone will be the responsibility of the person who handle it.Never can:Flying in urban areas.Fly over crowds of people: gardens, beaches, concerts, events, etc.Night flying.Fly near airports, airfields, etc.Flying in areas where there will be flights to other low-flying aircraft (paragliding, parachuting, heliports, etc.).Do not put others in danger.For more information, see: www.seguridadaerea.gob.es

List of components:1 x Power VR Drone +1 x VR Drone Glasses1 x 2.4Ghz Control Extendable2 x Batteries4 x Replacement Propellers1 x USB Battery Charger drone1 x USB Control Charger1 x Screwdriver1 x Manual

Left turn adjustment

3

CONTROL PARTS

EXTENSOR

On / Off

Absolute control

Acceleration, up / down and

turn

Left turn adjustment

Adjustmentright turn

Adjustment displacement to the left

Adjustment moving forward

Adjustment moving backward

Adjustment displacement to

the right

Direction control

Speed

Back to the takeoff point

L

Acrobatics

Light charging

Light On

Extension Adjustment

Take-off/Landing

Emergency Stop

You can extend the length of the handle of the control to better fit your hand. Simply unscrew the extensor adjustment (1). The handle will be on going lengthening long as you go unscrewing (2).

1

2

CONTROL CHARGEWith the control off, insert the charging cable plug into the charging port on the left side of the control and connect the USB plug to the computer. The red light load will be light for the duration of the charging process and will go off when you have finished (the process takes about 40 minutes).

Charge light

Power lightPC

LED on/off

START

PRECAUTIONS

1. Turn your drone and turn off the switch you will find at the bottom right (“ON”).

2. Turn on the control by pressing the on / off.

The control will sound 3 beeps and the red LED will light up will, getting flashing.

3. Push the power lever to the maximum and then lower it to the bottom position.

The control will sound a long beep, which is a sign that the control and the drone are synchronized.

Your VR Drone Power + is ready to fly.

4. Auto takeoff and auto landing:The VR Drone Power + includes the option to take off and land with just one button. Once synchronized (up to step 3), press the START / STOP button and the drone takes off flight alone. Thus the control is activated high, which allows the drone manage and maintain a fixed flying height automati-cally.Press the button again to land the drone smoothly and easily.

1 When the control of the LED remains lit, but the drone LED flashes slowly, it is a sign that the synchronization was not properly executed. Turn off the control and the drone, and rerun the “start-up” from the beginning.

2. If, when you start to fly, the drone does not remain stably, land it, then turn off the control and the drone and re-synchronize it, paying particular attention whether the drone is placed on a flat, horizontal surface relative to ground.

3. When the drone LED blinks slowly, it means that the battery is running out. Land the drone and put the battery charging with the USB charger provided.

ADVICE:

When you synchronize your VR Drone Power +, ensure that it is on a flat, horizontal surface, so that the flight will be stable.

Switched on/

Off

ON/OFF

Take-off/Landing

5

CHARGING THE BATTERY OF THE DRONE

1. Connect the power adapter to the electrical outlet and then to the charging base.

2. Link the battery to the charging base. The light will be switched on during the charging process and will go off when charging is complete.

CHARGING TIME:

The battery takes about 70 minutes to charge a battery for flight time range of 13 to 15 minutes.

PRECAUTIONS DURING BATTERY CHARGING1. During charging, place the battery and the charger in a dry, ventilated and away from intense heat sources or flammable products.2. During charging, disconnect the battery drone. It is important that the battery charging is supervised by an adult to prevent accidents.3. Do not charge the battery immediately after flying. Wait until the battery has cooled. Otherwise, you may swell and even burn or explode.4. Be sure to use the original USB charger provided with the drone. When you have used enough battery, or notice that is a little swollen, replace it.5. A battery that is not used for a long period of time loses its charge.6. Charge or discharge frequently a battery shortens its life.

3. Insert the battery into the VR Power Drone + and link it to the connector as shown in the images above

BATTERY MAINTENANCE

FLIGHT SPEEDS

1. The battery should be stored in a dry, ventilated at room temperature between 18 and 25 ° C.2. To extend battery life, avoid repeated charging or excessive discharges.3. When storing the battery for a long period of time, charge it first and keep it at least 50 to 60% of the total load allowed.4. If you do not will use for more than a month, it is highly recommended that measures the battery voltage each month to ensure that there is below 3V. Otherwise, recharge the battery as described in point 3.

As you go moving and controlling the drone, you can increase the difficulty level, the VR Drone Power has a 3-speed selector: low (40%, 1 beep), medium (60% 2 beeps) and high (100% 3 beeps).

This speed can be selected by pressing the speed button. We recommend starting at the first speed. Pressing the button being in third speed, it returns to the first.

ENVIRONMENT TO FLY

3 metros

3 metros

3 m

etro

s3 m

etros

2 metr

os

To start the flight Drone Power VR +, we recommend you do on windless days. Ensure that you are away from other people, animals or any obstacles.

Range command: The quadcopter flight range is about 25 meters. If you rise over this application level, you lost will control.

Warning: The quadcopter can fly further than the flight range, if this is done in strong wind conditions, which may result in loss of control of it.

7

CONTROL OF THE MOVEMENT

UPWARD AND DOWNWARD

ADJUSTMENTS FORWARD AND BACKWARD

ADJUSTMENT TURNING THE LEFT AND RIGHT

ADJUSTMENTS OF SIDE DISPLACEMENT

TURN LEFT AND RIGHT SIDE DISPLACEMENT

FORWARD AND BACKWARD

Push up the power lever (left) to the drone go upward.Push down the power lever (left) to the drone go downward.

When the drone moves and goes backward incorrectly, you can correct the flight by pressing the forward or backward adjustment button, as appropriate.

When the drone yurns out of control, you can correct the flight by pressing the speed adjustment button to the left or right, as appropriate.

When the drone moves sideways incorrectly, you can correct the flight by pressing the displacement adjustment button to the left or right, as appropriate.

Move the power lever (left) to the right or to the left so that the drone turn to the corresponding side.

Move the direction lever (right) to the right or left to move the drone to the corresponding side.

Push the steering lever (right) to the drone go forward.Push the steering lever (right) to the drone go backwards.

ADJUSTMENT

FEATURES OF THE VR DRONE POWER +Protection against Low Voltage:When the battery of the drone does not have enough power, the motors interrupt their supply. It is a self-protection system of the battery.Protection against over-current:When drone propellers collide against an object or attach the power system momentarily halts the motors, it is thus reactivating the propeller is released.Emergency Stop button:Press this button when you are about to collide with an obstacle to stop the engines. You also can perform this maneuver down power lever.

lights control:The LED lights of the drone can be activated or deactivated from the control by pressing the top button (2 seconds) as shown on the image.

Function back to the takeoff point:The drone assumes the takeoff location as a reference point. When you press the button of flight, the drone return, taking as reference the trajectory of the take-off point. Then when you are near the place of takeoff, disable the return mode, returning to press the button or using the lever of acceleration to return the manual control. If you do not, the drone will continue to fly straight without stopping.

Flight

Example 1: After take off, do the drone move straight. Pressing the back button and it will return straight to the place of takeoff.

ADVICE ON THE RETURN MODE TAKEOFF POINT:

If, after taking off, makes the drone fly backwards instead of forward when you press the back button instead of returning to the point of takeoff point, it will return even more (in the 3 examples is explained graphically the operation of this mode).

Example 2: After take off, do the drone move to the left. Pressing the back button to the point of takeoff, return straight on a track which will be to the left of the takeoff point.

Example 3: After take off, do the drone return. Pressing the back button to the point of takeoff, it will return straight on a trajectory that will go even further in relation to the take-off point.

Return

Takeoff point

Flight

Return

Takeoff point

FlightReturn

Takeoff point

9

Hard Reset:When the drone flies uncontrollably and it is impossible to make an adjustment to correct these errors flight, it is best to perform a factory reset.To make the hard reset, follow these steps:

4. Place the drone on a flat, horizontal surface and move the levers right and left of the control to the bottom left for 2-3 seconds. The LED indicator will change to steady light for a quick flash.When after 2 to 3 seconds the LED light is fixed, the drone have been reset correctly.

3. When the drone LED flashes quickly, move up and down the power lever (left) to the maximum. Now the LED of the drone will go from a slow blink to maintain fixed LED.

ACROBATIC MODE:When you have already controlled the flight and the basic operation of the drone, you will be ready to perform some tricks and impressive stunts.The main thing is that the drone flies at a height greater than 3 meters, since all the stunts involve a loss of height and thus avoids the danger of hitting the ground.To perform acrobatics, you must press the button “aerobatics” (button located on the front right) and then push the direction lever (right) in the desired direction to make an aerobatic 360.

1.Turn on the drone.2. Turn on the control.

ADVICE ON ACROBATIC FLIGHT MODE:

Be careful to keep the battery sufficiently charged when performing stunts.

The Absolute Control allows the drone to move in the direction that we give it, regardless of how is placed and where the front is targeted. When the Absolute control is inactive, the drone moves in the direction that it is facing. To enable full control mode, press the button thatit is shown in the left side of the image until you hear three beeps and then press it again.To disable this mode simply press the button again.

OrientationFront Absolute control

ActivatedAbsolute controlDisabled

MANAGE ABSOLUTE CONTROL

Photo capture:After the drone start to fly, press the button of the Application capture (see page 11 “Using Smartphone” section). The front lights drone will light up for one second, indicating that the catch was made.

Video capture:Press the Video Capture button in the application (see page 11 “Using Smartphone”). The camera will record while the front lights of the drone flash. Press the button again to stop recording and the flashing LED indicators will stop.Camera indicators

CAMERA USE

1. Place the camera in the lower fittings VR Drone Power + as shown in the image. (image1). 2. Connect the camera cable to the white lower connector, as shown in the second image (image 2). 3. Insert the microSD card into the slot of the camera (image. 3).

Image1 Image 2 Image 3

ARMAZENAMENTO DE FOTOGRAFIAS E VÍDEOS

With the microSD card inserted, pictures are automatically recorded on the card and on your smartphone, while the videos will be stored only on the card. If you want to download them to your smartphone, select the Application transfer option. If you have not entered a microSD card, your digital photos, as videos will be downloaded to the smartphone.

NOTE ON CARDBOARD INTRODUCTION MICRO SD

In order to properly insert, push the microSD card until it clicks. You may need to make use of a clip or a nail so well into the slot.

USING SMARTPHONE

There are several features of your VR Drone Power + that you can enjoy using your smartphone. To do so, download the official App from the product page:www.juguetronica.com/extras/vr-drone-power-plusOnce installed the app, connect the drone in order that runs the wi-fi signal. Search on your smartphone the wi-fi signal and connect your smartphone to the same (no need password). Then open the App. When you release the app, you will see the smartphone screen real-time retransmission of the drone’s camera is capturing. You can use your smartphone in three ways: As screen assist of the control, in which case you can put it in the support of the center of the control (extend and adjust the central support to fit your smartphone model) to control the drone with what replace the control or as FPV immersion experience, which need the VR Drone Glasses.

11

CameraAt the top of the screen area you will see that you can choose the photo button or video. Just touch the icon generates an automatic capture. If you tap the icon, the camera will begin recording a video. Press again to end recording. The files can be recorded on the microSD card drone or directly on your smartphone (see “Storage of photos and videos” on page 10). The App itself includes an instruction manual to learn how to edit features such as the speed or the folder where you keep the files.

Control droneThe App offers the possibility of controlling the drone from the smartphone, using it instead of the control. For this, you must switch from Off to On tapping the button. Now, instead of the camera image transmission, the display will show 2 virtual levers (see image) you can use to manage the drone instead of the levers of the control.To turn on the drone, press the button. Then come the available icons that correspond respectively to automatic takeoff and landing.

FPV experience with VR Drone GlassesTo use the drone with Drone VR Glasses (included), tap “Settings” of the App, represented by the icon and select the icon in the menu that opens. You will see that the camera image is divided into two to adapt to the vision glasses. Then remove the glasses holder (see image1), place the phone in the direction that the image 2 shows and reinsert the support in glasses with the smartphone inside. Then put the glasses and adjust distance and focus of the lens using the upper buttons (picture 3) for optimum viewing. You can now start to fly!

Image 1

Image 2

Image 3

CHANGE PROPELLERS

1. The propellers of the Power VR + are very resistant, but may break with a heavy blow. In the package it is included other replacement. Changing them is very easy: simply unscrew the screw that connects the engine and put them in the dock. Then again tighten the screw without excessive force.Take special care on the tilt of the propellers do not change, since it must be equal; it means, if it broke a type A, you should replace it with another also type A.The propellers are always equal diagonal (image1) Image 1

A

A

B

B

The drone does not respond to commands.

The drone delay to respond or responds with difficulty to commands.

1. The drone does not have enough battery.2. The control does not have enough battery.3. The frequency of the control does not match the drone.

1. The control does not have sufficient power.2. There is another radio equipment with the same frequency control.3. Dirt and hair between the propellers or engines.

1. Changing the battery of the control.2. Move the other radio equipment of the drone’s coverage area.3. Clean dirt that may interfere with the use of engines and propellers with your fingers or blowing.

1. Load the drone.2. Switch batteries of the control.3. Perform a synchronization between the control and the drone.

TROUBLESHOOTING

PROBLEM REASON SOLUTION

JUGUETRÓNICA, SL - NIF: B83788414Thank you for purchasing this product.

Domestic Warranty and Technical Support

Shop: C/ Alberto Aguilera, 1 - 28015 Madrid - EspanhaAfter-sales service: C/ Acuerdo, 36 - 28015 Madrid - Espanha

You can find the application of control (iOS / Android) in: www.juguetronica.com/extras/vr-drone-power-plus

or scan the QR code

The cross bin symbol indicates that the products and the batteries must not be disposed of as household waste, since they contain substances harmful to the environment. Please use the ecopoints to eliminate.