L N

2 Gang Wi-Fi Dimmer Switch Module MS-105B

INSTRUCTION MANUALGlobal international operation Whenever & Wherever You are,All-in-one Mobile App

Anywhere

APP

APP

Schedule timer Voice control-work with Google Home

Voice control-workwith Amazon Alexa

Device Sharing

App

APP

Router Voice control Push switches

Reset switch

Inhouse local operation

INSTALLATION Warnings:

1. electrician in accoInstallation must be carried out by a qualified

rdance with local regulations.

2. Keep the device out of the reach of children.

3. Keep the device away from water , damp or hot environment.

4. Install the device away from strong signal sources such as microwave oven that may cause signal interruption resulted in abnormal operation of the device.

5. Obstruction by concrete wall or metallic materials may reduce the effective operation range of the device and should be avoided.

6. Do NOT attempt to disassemble,repair or modify the device.

Wiring Instructions and Diagrams

FAQ

52 mm

18 m

m

47 m

m

Scan the QR code to download Smart Life App, or you can also search keyword “Smart Life” at App Store or Googleplay to download App.

iOS App / Android App

APP USER MANUAL

MANUAL OVERRIDE The switch module terminal reserves the access of manual override function for the end-user to switch on/off .• Switch on/off for permanent on/off function.Notes:1) Both the adjustment on App and switch can be reset

, the last adjustment remains in memory. 2) The App control is synchronized with the

manual switch.

1.Turn off the power supply before carrying out any electrical installation work.

2. Connect wires according to the wiring diagram.

3. Insert the module into the junction box.

4. Connect the power supply and follow switch module configuration instructions.

Notes: Put your smartphone close to the switch

sure you have min. 50% Wi-Fi signal. module when you’re configuring, and make

TECHNICAL SPECIFICATIONS Q1: What should I do if I can’t configure the switch module?

a. Please check whether device is powered on.

b. Make sure your mobile and switch module are under the same 2.4 GHz WiFi network.

c. Whether it’s in good internet conditions.

d. Make sure the password entered in App is correct.

e. Make sure the wiring is correct.

Q2: What device can be connected to this WiFi switch module?

Q3: What happens if the WiFi goes off?

Most of your household electrical appliances can be, such as lamps, laundry machine, coffe maker, etc.

You can still control the device connected the switch module with your traditional switch and once WiFi is active again the device connected to module will connect automatically to your WiFi network.

Q4: What should I do if I change the WiFi network or change the password?

You have to re-connect our WiFi switch module to the new WiFi network according t to he App User Manual.

Q5: How do I reset the device?

Power on/off device 10 times until the beeper on the module sounds continuously.

Mounting Clip

Product type 2 Gang WiFi Dimmer Switch Module

WiFi frequency 2.4GHz WiFi Operation temp. -10ºC - +40ºCCase temp. Tc: +80ºC (Max.)Operation range ≤ 200 mDims (WxDxH) 52x47x18 mmIP rating IP20Warranty 1 years

Voltage 90-250V ACMax Power 2*100w

Switch

Switch

WIRING DIAGRAM

1 2 3 4

5 6 7 8

2

Deutsches Handbuch

Max Power: 2*100W

50/60Hz

S

LLL

N2S1

1

Max Power: 2*100W

50/60Hz

Max P

ower: 2*100W

50/60Hz

Max Power: 2*100W

50/60Hz

EMC Standard (EMC)EN 300 328 V2.1.1 (2016-11), EN 301489-1 V2.1.1 (2017-02), EN 301489-17 V3.1.1 (2017-02), EN 62311: 2008, EN 55015:2013 +A1:2015, EN 61547:2009

Safety Standard (LVD)IEC 60669-2-1:2002/AMD1:2008/AMD2:2015, IEC 60669-1:1998/AMD1:1999/AMD2:2006,EN 60669-2-1:2004+A1: 2009+ A2:2010, EN 60669-1:2018

RoHS Standard (RoHS)2011/65/EU, (EU) 2015/683

Log in or register your account with your mobile number or e-mail address. Type in the verificationcode sent to your mobile or mail box, then set your login password. Click "Create Family" to enter into the App.

Mobile number/e-mail address

Region

Open the App, select “+” on top right and choose“Switch (Wi-Fi)” to add device.

Make sure your smart phone and WiFi switch module are under the same WiFi network at

blinks rapidly (twice a second).

Add Device

the indicator blinks rapidly

Add Device

The connecting will take about 10-120 seconds to complete depending on your network condition.

Connecting

Device foundRegister device to the smart cloudinitializing device

Make sure your router,mobile,anddevice are as close as possible

2%

When pairing is done, the Dimmer will be shown on the App, and you are able to change the device name to your own taste.

Dimmer

Device added successfully

All Device

Connect to Amazon Alexa or Google Assistant for voice control, or share the devices with your families or friends.

More

Device Name

Basic information about the device

Supported Third-party Control Others

Others

Share Device

Create Group

Device information

Feedback

Device Location

Check Network

Amazon Alexa

Google Assistant

Enjoy your smart life of home automation for lighting control by using our All-in-one mobile App wherever you are in the world or simply by voice control when you are sitting at home comfortably.

Voice control

App control

APP

Confirm indicator blinks rapidly

Obtain verification code

After the wiring of switch module is done, press the return button switch for 10 times (keep timeinterval not too short) until the beep sounds continuously and rapidly as Di-Di-Di... for pairing mode.

9 10 11 12

1413 15 16

Note:This smart switch module can only be used with reset switch.

Reset Switch

Max Power: 2*100W

50/60Hz

Max Power: 2*100W

50/60Hz