instruction of gu bts goods distribute

Instruction of GU BTS goods distribute

Internal Only▲

22


Reference document package list

BOM of each Circle.

Site survey information table

RF engineer provided Site information table

一级目录标题楷体 GB2312(加粗 )

Arial(加粗 )白色

24 ～ 28号

Select the type of rack in packing list

Installation material selection

Select the Antenna from Packing List

Site’s RSU selection

Others





Others

Internal Only▲

44

Instruction of GU BTS goods distribute GGGG

According to the site information




24 ～ 28号





Others





Others

Internal Only▲

66

Instruction of GU BTS goods distribute GGGG

Cabinet material cabinet

Almost all Sites in this project should have only one cabinet, which means

the site should only use one package of cabinet material

RF Material cabinet

In RF Material cabinet mainly include the feeder and jumper installation

materials.

One action one cabinet when we distribute the goods.

Take indoor 900M swap+1800M new+2100M new” for example

Internal Only▲

77


Cabinet Material:

The package of cabinet material should be only 1, you can select

the

“12.13.2_Indoor Multitechnology Cabinet Installation Material -

SWAP site” in the “设备参数 (Equipment Parameter)”and site002

as below:

Internal Only▲

88

Instruction of GU BTS goods distributeRF Material:

The RF material of this site should send 1 SWAP RF material and 2

more green filed RF material, which can be selected as below:

1 、 SWAP RF material

2 、 green filed RF material

Internal Only▲

99


Just in one word, only one cabinet material for one

site, and the quantities of RF material packages

depends on the technologies, do not forget to check

the quantity of the rack-top jumpers, which should

be taken out from the cabinet material box (if you

do not put the whole box of cabinet material in the

DO).



24 ～ 28号





Others





Others

Internal Only▲

1111



There are 6 scenarios for choosing an Antenna

Reuse the old antenna

2G site single band antenna swap

3G site Greenfield

2G double band antenna swap

2G and 3G double band antenna swap

Triple band antenna swap

Internal Only▲

1212


RCU selection

RCU module will be used only by UMTS system,

the material code is “056501400132”, and the

name is “AISG2.0RCU | 8110.40//86010148//ACU-

A20-N//ATM200-A20// RCU-V5002/ /MBRET-RCU-

003”.

NOTE: Single Band- UMTS 65 deg is together with

RCU module ， No need RCU.

Dual & Tri-band antenna are needed.



24 ～ 28号





Others





Others

Internal Only▲

1414





24 ～ 28号





Others





Others

Internal Only▲

1616

Instruction of GU BTS goods distributeAntenna pole selection

Power cable

Ground cable

RSU jumper

Feeder cable

Feeder Connector Preparation

Unused Material recycle

Remaining material management

CAT5 Cable(052522000041)

Notes: These are Local Purchased, should

according to the TSSR

RSU Label---From cabinet box according

to the BTS configrate

instruction of gu bts goods distribute

Documents