instrumentation & power electronics lecture 15 & 16 d.c to d.c converters
TRANSCRIPT
![Page 1: Instrumentation & Power Electronics Lecture 15 & 16 D.C to D.C Converters](https://reader036.vdocument.in/reader036/viewer/2022062421/56649d885503460f94a6cd6b/html5/thumbnails/1.jpg)
Instrumentation &
Power Electronics
Lecture 15 & 16D.C to D.C Converters
![Page 2: Instrumentation & Power Electronics Lecture 15 & 16 D.C to D.C Converters](https://reader036.vdocument.in/reader036/viewer/2022062421/56649d885503460f94a6cd6b/html5/thumbnails/2.jpg)
Introduction• DC to DC converters are important in portable electronic
devices such as cellular phones and laptop computers, which are supplied with power from batteries primarily.
• Such electronic devices often contain several sub-circuits, each with its own voltage level requirement different from that supplied by the battery or an external supply.
• They are also widely used in dc-motor drive applications.
• Often input to these converters is an unregulated dc voltage, which is obtained by rectifying the line voltage.
![Page 3: Instrumentation & Power Electronics Lecture 15 & 16 D.C to D.C Converters](https://reader036.vdocument.in/reader036/viewer/2022062421/56649d885503460f94a6cd6b/html5/thumbnails/3.jpg)
Introduction
UncontrolledDiode Rectifier
LoadD.C to D.C Converter
Battery
Filter
AC Line Voltage
1-Phase or3-Phase
DC Unregulated
DC Unregulated
DC Unregulated
DC Regulated
vc
D.C to D.C Converter System
![Page 4: Instrumentation & Power Electronics Lecture 15 & 16 D.C to D.C Converters](https://reader036.vdocument.in/reader036/viewer/2022062421/56649d885503460f94a6cd6b/html5/thumbnails/4.jpg)
Efficiency & Power Losses• High efficiency is essential in any power processing
application.
in
out
P
P
• The efficiency of a converter is
)11
( outoutinloss PPPP
• The power lost in converter is
![Page 5: Instrumentation & Power Electronics Lecture 15 & 16 D.C to D.C Converters](https://reader036.vdocument.in/reader036/viewer/2022062421/56649d885503460f94a6cd6b/html5/thumbnails/5.jpg)
Efficiency & Power Losses
• Efficiency is a good measure of the success of a given converter technology.
• With very small amount of power lost, the converter elements can be packaged with high density, leading to a converter of small size and weight, and of low temperature rise.
• How can we build a circuit that changes the voltage, yet dissipates negligible power?
![Page 6: Instrumentation & Power Electronics Lecture 15 & 16 D.C to D.C Converters](https://reader036.vdocument.in/reader036/viewer/2022062421/56649d885503460f94a6cd6b/html5/thumbnails/6.jpg)
Efficiency & Power Losses• The various conventional circuit elements are illustrated in
Following figure.
• The available circuit elements fall broadly into the classes of resistive elements, capacitive elements, magnetic devices including inductors and transformers, semiconductor devices operated in the linear mode and semiconductor devices operated in the switched mode.
![Page 7: Instrumentation & Power Electronics Lecture 15 & 16 D.C to D.C Converters](https://reader036.vdocument.in/reader036/viewer/2022062421/56649d885503460f94a6cd6b/html5/thumbnails/7.jpg)
Types of dc-dc Converters
• Types of D.C to D.C converters
– Linear Converters (7805)
– Switch Mode
– Magnetic
– E.t.c
![Page 8: Instrumentation & Power Electronics Lecture 15 & 16 D.C to D.C Converters](https://reader036.vdocument.in/reader036/viewer/2022062421/56649d885503460f94a6cd6b/html5/thumbnails/8.jpg)
Simple dc-dc Converters
• Let us now construct a simple dc-dc converter. The input voltage vg is 100 V. It is desired to supply 50 V to an effective 5Ω load, such that the dc load current is 10 A.
![Page 9: Instrumentation & Power Electronics Lecture 15 & 16 D.C to D.C Converters](https://reader036.vdocument.in/reader036/viewer/2022062421/56649d885503460f94a6cd6b/html5/thumbnails/9.jpg)
Resistive dc-dc Converters
• Using Voltage divided rule.
![Page 10: Instrumentation & Power Electronics Lecture 15 & 16 D.C to D.C Converters](https://reader036.vdocument.in/reader036/viewer/2022062421/56649d885503460f94a6cd6b/html5/thumbnails/10.jpg)
Linear dc-dc Converters
• Linear Mode dc-dc converter
![Page 11: Instrumentation & Power Electronics Lecture 15 & 16 D.C to D.C Converters](https://reader036.vdocument.in/reader036/viewer/2022062421/56649d885503460f94a6cd6b/html5/thumbnails/11.jpg)
Switch Mode dc-dc Converters
![Page 12: Instrumentation & Power Electronics Lecture 15 & 16 D.C to D.C Converters](https://reader036.vdocument.in/reader036/viewer/2022062421/56649d885503460f94a6cd6b/html5/thumbnails/12.jpg)
Conclusion• Capacitors and magnetic devices are important elements of
switching converters, because ideally they do not consume power. • It is the resistive element, as well as the linear-mode
semiconductor device, that is avoided. • When a semiconductor device operates in the off state, its current
is zero and hence its power dissipation is zero. • When the semiconductor device operates in the on (saturated)
state, its voltage drop is small and hence its power dissipation is also small.
• In either event, the power dissipated by the semiconductor device is low.
• So capacitive and inductive elements, as well as switched-mode semiconductor devices, are available for synthesis of high-efficiency converters.
![Page 13: Instrumentation & Power Electronics Lecture 15 & 16 D.C to D.C Converters](https://reader036.vdocument.in/reader036/viewer/2022062421/56649d885503460f94a6cd6b/html5/thumbnails/13.jpg)
Switch Mode D.C to D.C Converters• Switch-mode DC to DC converters convert one DC voltage level
to another, by storing the input energy temporarily and then releasing that energy to the output at a different voltage.
• The storage may be in either magnetic field storage components (inductors, transformers) or electric field storage components (capacitors).
• This conversion method is more power efficient (often 75% to 98%) than linear voltage regulation (which dissipates unwanted power as heat).
• This efficiency is beneficial to increasing the running time of battery operated devices.
![Page 14: Instrumentation & Power Electronics Lecture 15 & 16 D.C to D.C Converters](https://reader036.vdocument.in/reader036/viewer/2022062421/56649d885503460f94a6cd6b/html5/thumbnails/14.jpg)
Control of D.C to D.C Converters• In dc-dc converters, the average dc output voltage must be
controlled to equal a desired level, though the input voltage and the output load may fluctuate.
![Page 15: Instrumentation & Power Electronics Lecture 15 & 16 D.C to D.C Converters](https://reader036.vdocument.in/reader036/viewer/2022062421/56649d885503460f94a6cd6b/html5/thumbnails/15.jpg)
Control of D.C to D.C Converters
• In a dc-dc converter with a given input voltage, the average output voltage is controlled by controlling the switch on and off duration (ton and toff).
vd
+
-
R vo
+
-
vo
vd
ton toff
Ts
![Page 16: Instrumentation & Power Electronics Lecture 15 & 16 D.C to D.C Converters](https://reader036.vdocument.in/reader036/viewer/2022062421/56649d885503460f94a6cd6b/html5/thumbnails/16.jpg)
Control of D.C to D.C Converters
• This method is called PWM Switching.
• Switching duty ratio D is varied to control the average output voltage.
vd
+
-
R vo
+
-
vo
vd
ton toff
Ts
s
on
T
tD
![Page 17: Instrumentation & Power Electronics Lecture 15 & 16 D.C to D.C Converters](https://reader036.vdocument.in/reader036/viewer/2022062421/56649d885503460f94a6cd6b/html5/thumbnails/17.jpg)
Control of D.C to D.C Converters
st
control
s
on
V
V
T
tD
amplifier
+
-Comparator
Vo (desired)
Vo (actual)
Sawtooth Wave
Switch Control Signal
Vcontrol
vcontrol
t
Ts
vst
on
off
Switch Control Signal
![Page 18: Instrumentation & Power Electronics Lecture 15 & 16 D.C to D.C Converters](https://reader036.vdocument.in/reader036/viewer/2022062421/56649d885503460f94a6cd6b/html5/thumbnails/18.jpg)
Switch Mode D.C to D.C Converters
• Types of Switch Mode D.C to D.C Converters
– Step-Down (Buck) converter
– Step-up (Boost) converter
– Step Down/Up (Buck-Boost) converter
![Page 19: Instrumentation & Power Electronics Lecture 15 & 16 D.C to D.C Converters](https://reader036.vdocument.in/reader036/viewer/2022062421/56649d885503460f94a6cd6b/html5/thumbnails/19.jpg)
Step-Down Converter (Buck Converter)
• As name implies a step-down converter produces a lower average output voltage than the dc input voltage Vd.
• Its main application is in regulated dc power supplies and dc-motor speed control.
![Page 20: Instrumentation & Power Electronics Lecture 15 & 16 D.C to D.C Converters](https://reader036.vdocument.in/reader036/viewer/2022062421/56649d885503460f94a6cd6b/html5/thumbnails/20.jpg)
Step-Down Converter (Buck Converter)
• Low Pass Filter– At low frequencies the inductor appears as a short and the
capacitor is an open and the input passes through to the output.
– At high frequencies the inductor looks like an open and the capacitor a short and the input is blocked from the output.
![Page 21: Instrumentation & Power Electronics Lecture 15 & 16 D.C to D.C Converters](https://reader036.vdocument.in/reader036/viewer/2022062421/56649d885503460f94a6cd6b/html5/thumbnails/21.jpg)
Step-Down Converter (Buck Converter)
• When S1 is ON and S2 is OFF
![Page 22: Instrumentation & Power Electronics Lecture 15 & 16 D.C to D.C Converters](https://reader036.vdocument.in/reader036/viewer/2022062421/56649d885503460f94a6cd6b/html5/thumbnails/22.jpg)
Step-Down Converter (Buck Converter)
• When S1 is OFF and S2 is ON
![Page 23: Instrumentation & Power Electronics Lecture 15 & 16 D.C to D.C Converters](https://reader036.vdocument.in/reader036/viewer/2022062421/56649d885503460f94a6cd6b/html5/thumbnails/23.jpg)
Step-Down Converter (Buck Converter)
• When S1 is OFF and S2 is ON
![Page 24: Instrumentation & Power Electronics Lecture 15 & 16 D.C to D.C Converters](https://reader036.vdocument.in/reader036/viewer/2022062421/56649d885503460f94a6cd6b/html5/thumbnails/24.jpg)
Step-Down Converter (Buck Converter)
dttvT
VsT
os
o 0
)(1
dtdttVT
Voff
on
ont
t
t
ds
o 0 )(1
0
ds
ono VT
tV
do DVV
![Page 25: Instrumentation & Power Electronics Lecture 15 & 16 D.C to D.C Converters](https://reader036.vdocument.in/reader036/viewer/2022062421/56649d885503460f94a6cd6b/html5/thumbnails/25.jpg)
• Continuous conduction mode
– A buck converter operates in continuous mode if the current through the inductor (IL) never falls to zero during the commutation cycle.
– In this mode, the operating principle is described by the plots in figure.
Step-Down Converter (Buck Converter)
![Page 26: Instrumentation & Power Electronics Lecture 15 & 16 D.C to D.C Converters](https://reader036.vdocument.in/reader036/viewer/2022062421/56649d885503460f94a6cd6b/html5/thumbnails/26.jpg)
Step-Up Converter (Boost Converter)
• A boost converter (step-up converter) is a DC-to-DC power converter with an output voltage greater than its input voltage.
![Page 27: Instrumentation & Power Electronics Lecture 15 & 16 D.C to D.C Converters](https://reader036.vdocument.in/reader036/viewer/2022062421/56649d885503460f94a6cd6b/html5/thumbnails/27.jpg)
Step-Up Converter (Boost Converter)
• When the switch is closed, current flows through the inductor in clockwise direction and the inductor stores the energy.
• Polarity of the left side of the inductor is positive.
![Page 28: Instrumentation & Power Electronics Lecture 15 & 16 D.C to D.C Converters](https://reader036.vdocument.in/reader036/viewer/2022062421/56649d885503460f94a6cd6b/html5/thumbnails/28.jpg)
Step-Up Converter (Boost Converter)• When the switch is opened, current will be reduced as the
impedance is higher. • Therefore, change or reduction in current will be opposed by
the inductor. Thus the polarity will be reversed (means left side of inductor will be negative now).
• As a result two sources will be in series causing a higher voltage to charge the capacitor through the diode D.
![Page 29: Instrumentation & Power Electronics Lecture 15 & 16 D.C to D.C Converters](https://reader036.vdocument.in/reader036/viewer/2022062421/56649d885503460f94a6cd6b/html5/thumbnails/29.jpg)
Buck-Boost Converter• The buck–boost converter is a type of DC-to-DC
converter that has an output voltage magnitude that is either greater than or less than the input voltage magnitude.
![Page 30: Instrumentation & Power Electronics Lecture 15 & 16 D.C to D.C Converters](https://reader036.vdocument.in/reader036/viewer/2022062421/56649d885503460f94a6cd6b/html5/thumbnails/30.jpg)
Buck-Boost Converter• while in the On-state, the input voltage source is
directly connected to the inductor (L). This results in accumulating energy in L. In this stage, the capacitor supplies energy to the output load.
![Page 31: Instrumentation & Power Electronics Lecture 15 & 16 D.C to D.C Converters](https://reader036.vdocument.in/reader036/viewer/2022062421/56649d885503460f94a6cd6b/html5/thumbnails/31.jpg)
Buck-Boost Converter• In Off-state, the inductor is connected to the output
load and capacitor, so energy is transferred from L to C and R.
![Page 32: Instrumentation & Power Electronics Lecture 15 & 16 D.C to D.C Converters](https://reader036.vdocument.in/reader036/viewer/2022062421/56649d885503460f94a6cd6b/html5/thumbnails/32.jpg)
END OF LECTURES-13-14
To download this lecture visithttp://imtiazhussainkalwar.weebly.com/