integrated fixture based led classroom lighting systems
TRANSCRIPT
Advantages of Integrated Fixture-Based LED Classroom Lighting Systems
Presented by Roger Koch
What is an integrated LED fixture?Integrated LED Fixture LED Bulb
Integrated LED Fixtures are more Energy and Cost Efficient Compared to LED Bulbs
Integrated LED Fixture LED Bulb
• Up to 5,000 lumens/fixture• 100,000 hours of service
life• Up to 10 year warranty
• Typically 600 lumens/bulb• Typically 15,000 hours of
service life• Typically 2 year warranty
Flush Mount Wide Area Dispersion LED Fixtures Are Available
• High fixture efficacy
• Evenly disbursed illumination
• Reduces uneven light distribution, which creates adjacent bright and dark areas
• High system efficiency
LED Fixtures Provide Nearly Constant Lumen Output for their Entire Lifespan
• No need to design for late cycle fixture light output
• Improves system energy efficiency
LED Chips are Constantly Improving Lumen per Watt Output
• This type of chip can deliver over 150 lumens/watt
•This is the most efficient light-generating technology in current existence
Many LED Products are Dimmable
•This further reduces system energy requirements
Use of Zones
•Zones allow different lighting levels in different parts of the classroom
•This saves energy
•This improves projected image presentations
Use of Sensor-Based Controls
•Occupancy sensors can be used to turn off lights when the room is not occupied
•Light sensors can be used to accommodate daylight harvesting
•Saves energy costs
Improved Color Spectrum Delivered by LED Lighting
LED White Light Spectrum
Reduction in Eye Strain and HeadachesTeachers and students alike endorse the
product
LED Lighting is a Green Solution
• No mercury in the LED system
• Produces 45-50 ft. candles of superior illumination at desk level utilizing only 0.5-0.6 watts/sq. ft.
• Additional energy savings when utilizing dimming, zones and control sensors in the system
• Most energy-efficient system available by a wide margin
• Exceeds LEED Platinum levels
Take a load off your maintenance budget
• Eliminates costly bulb, ballast, lens, and failed fixture replacement costs
• Even more important in difficult to access and service locations
Easy and Inexpensive to Install •The D/C option can be installed as a class
2 low voltage D/C system
•This is the same certification as for cable, telephone, security and internet systems
•A typical classroom installation can be completed in 3-5 man-hours
Sample Cost-Benefit Analyses
1. The Miami Country Day Lower School canopy lighting fixture replacement project
2. The Miami Country Day High School canopy lighting fixture replacement project
3. A typical classroom lighting system replacement project