integration guide davinci iii vending - six · the davinci iii vending module is powered using the...

15
INTEGRATION GUIDE DAVINCI III VENDING

Upload: others

Post on 16-Oct-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: INTEGRATION GUIDE DAVINCI III VENDING - SIX · The davinci III VENDING module is powered using the hybrid slot reader, a mains adapter or a vending machine. In such instances, additional

INTEGRATION GUIDE

DAVINCI III VENDING

Page 2: INTEGRATION GUIDE DAVINCI III VENDING - SIX · The davinci III VENDING module is powered using the hybrid slot reader, a mains adapter or a vending machine. In such instances, additional

2

1 LISTOFABBREVIATIONS............................................................................................................................................................. 3

2 INSTALLATION............................................................................................................................................................................... 4

2.1 DIMENSIONSFORTHEDEVICE’SFRONTPANELCUTOUT....................................................................................................... 4

2.2 INSTALLINGTHEVENDINGMODULE............................................................................................................................................ 5

2.3 INSTALLINGTHECONTACTCARDSLOTREADER...................................................................................................................... 6

2.4 INSTALLINGTHERFIDREADER...................................................................................................................................................... 7

2.5 SUPPLYCONCEPT............................................................................................................................................................................. 8

2.5.1 CONNECTINGTHECOMPONENTS................................................................................................................................................ 8

2.6 PINASSIGNMENTFORTHECONNECTORS................................................................................................................................. 9

2.6.1 PINASSIGNMENTFORTHEDAVINCIIIIVENDINGMODULE.................................................................................................... 9

2.6.2 PINASSIGNMENTFORTHECARDREADERS.............................................................................................................................. 9

2.6.3 PINASSIGNMENTFORTHERFIDREADER................................................................................................................................... 9

2.7 EARTH.................................................................................................................................................................................................. 9

3 TERMINALINSTALLATION........................................................................................................................................................... 10

4 MENU–FUNCTIONOVERVIEW.................................................................................................................................................. 11

4.1 HWTESTMENU................................................................................................................................................................................. 11

5 DISMANTLINGPROTECTION...................................................................................................................................................... 12

5.1 DISPLAYINFORMATION................................................................................................................................................................... 12

5.2 REPLACINGTHEVENDINGMODULE............................................................................................................................................. 13

5.3 TEST–INSTALLATIONWITHOUTACTIVATION........................................................................................................................... 13

5.4 HELPWITHMOUNTINGANDASSEMBLY..................................................................................................................................... 13

6 DAVINCISAFE................................................................................................................................................................................ 14

CONTENTS

Page 3: INTEGRATION GUIDE DAVINCI III VENDING - SIX · The davinci III VENDING module is powered using the hybrid slot reader, a mains adapter or a vending machine. In such instances, additional

3

1 LIST OF ABBREVIATIONS

EMV EuropayMastercardVisa(cardpaymenttransactions)Electromagneticcompatibility(electric)

ECR ElectronicCashRegister

ep2 eft/pos2000:CHstandardbasedontheEMVstandardinelectronicpaymenttransactions

PW Password

SW Software

TID TerminalID

Trm Terminal

Trx Transaction

Theinformationprovidedinthisdocumentationhasbeencompiledwiththegreatestlevelofcare.Duetofurtherdevelopmentsinthefieldofelectronicpaymenttransactions,aswellasthetechnology,changesmayoccurthatleadtodeviationsfromtheseinstructions.

SIXPaymentServicesshallthereforeacceptnoliabilityfortheup-to-dateness,completenessoraccuracyoftheinformationprovidedintheseoperatinginstructions.AnyclaimsforliabilityassertedagainstSIXPaymentServiceswhichrelatetoinstancesofmaterialorimmate-

rialdamage,whichareattributabletotheuseornon-useoftheinforma-tionprovidedand/ortheuseofincorrectorincompleteinformation,areexcludedinprincipleinsofarasnodeliberateorgrosslynegligentmisconductmaybeprovenwithrespecttoSIXPaymentServices.

Pleasevisitourhomepagesix-payment-services.comtoviewthemostup-to-dateversionofthisdocument.

Page 4: INTEGRATION GUIDE DAVINCI III VENDING - SIX · The davinci III VENDING module is powered using the hybrid slot reader, a mains adapter or a vending machine. In such instances, additional

Cutoutforhybridslotreader

4

2 INSTALLATION

2.1 DIMENSIONS FOR THE DEVICE’S FRONT PANEL CUTOUT

PLEASE NOTE(Appliestoallassemblies)• Thedevicefrontintowhichthecontactcardreaderisinstalledmayhaveamaximumthicknessof6.6mm.•Thenuts/screwsusedtoaffixallcomponentsmustbetightenedwithatorqueof0.8Nm(± 10%).Thesamealsoappliestothe4screwsthatholdthemouthpiecemoduletogether.

• Theexternal4screws(affixingthereadertothedevicefront)mayhaveamaximumtorqueof0.3Nmforthefinaltighteningstep.

Figure:CutoutforthedevicefrontforthedavincireaderandRFIDreader

WeldingstudsM5(4x)

DEVICEFRONTCUTOUT

Wheninstallingthecomponentsinthedevicefront,thecutoutdimensionsdetailedinthisdocumentmustbeapplied.Particularconsiderationshouldbegiventothetorqueused

for thescrews/nuts,otherwiseproperoperationcannotbeguaranteed.

Page 5: INTEGRATION GUIDE DAVINCI III VENDING - SIX · The davinci III VENDING module is powered using the hybrid slot reader, a mains adapter or a vending machine. In such instances, additional

Max.installationdimension

5

2.2 INSTALLING THE VENDING MODULE

PLEASE NOTE•Duringthefixingprocess,ensurethattheVENDINGmoduleisfirmlyaffixedtothedevicefrontas,otherwise,thedismantlingprotectionmaybetriggered.

• Thecontactareaforthedismantlingprotectionswitchmustbeflat.

WeldingstudsM5(4x)

DEVICEFRONTCUTOUT

TheVENDINGmoduleismountedtothedevicefrontwiththehelpofself-lockingscrews.Theapplicabledimensionsforthe

devicefrontcutout,aswellasthepositionforthefixingbolts,canbefoundinChapter2.1.

Page 6: INTEGRATION GUIDE DAVINCI III VENDING - SIX · The davinci III VENDING module is powered using the hybrid slot reader, a mains adapter or a vending machine. In such instances, additional

Step1:Mountingthemouthpieceandretainerplate

Step2:Mountingtheboltsforfixingthecardslotreader

Step3:Mountingthecardslotreader

6

2.3 INSTALLING THE CONTACT CARD SLOT READER

Tobeginwith,themouthpieceandtheretainerplatearemountedtothedevicefront(step1).Theretainerplatefeatureschannelstocarryawaywater.Theboltsforfixingthecardslotreaderare

screwedtothemouthpieceinstep2.Thecardslotreaderisfixedwithself-lockingnuts(step3).

Page 7: INTEGRATION GUIDE DAVINCI III VENDING - SIX · The davinci III VENDING module is powered using the hybrid slot reader, a mains adapter or a vending machine. In such instances, additional

2

1

7

2.4 INSTALLING THE RFID READER

TheRFIDreaderisaffixedtothedevicefrontasfollows:

Openandremovethemountingframe:

Figure:MountingtheRFIDreader

Figure:DismantlingtheRFIDreader

Page 8: INTEGRATION GUIDE DAVINCI III VENDING - SIX · The davinci III VENDING module is powered using the hybrid slot reader, a mains adapter or a vending machine. In such instances, additional

8

2.5.1 CONNECTING THE COMPONENTS

2.5 SUPPLY CONCEPT

Theprocessofconnectingthecomponentsisdescribedinthissection.ThemaximumlengthoftheconnectionbetweenthereaderandthedavinciIIIVENDINGmoduleis2metres.OnlythosecablesspecifiedbySIXPaymentServicesmaybeused.

ThedavinciIIIVENDINGmoduleispoweredusingthehybridslotreader,amainsadapteroravendingmachine.Insuchinstances,additionalcomponentscanalsobepoweredsimul-

Intheversiondisplayed,thedavinciIIIVENDINGmodule(BaseUnit)isconnectedwithanRFIDreaderandahybridslotreader.Theentiresystemispoweredbymeansofasupplyconnectortothehybridslotreader.

taneouslywiththedavinciIIIVENDINGmodule.Thefollowingfiguredisplaysthesupplyconnector:

RFIDreader

davinciIIIBaseUnit

hybridslotreader

Supplyconnector

Page 9: INTEGRATION GUIDE DAVINCI III VENDING - SIX · The davinci III VENDING module is powered using the hybrid slot reader, a mains adapter or a vending machine. In such instances, additional

9

ARTICLE NAME CONNECTOR TYPE APPLICATION 1 2 3 4 5 6 7 8

Power Molex 12V-36VDC GND VCC

Power RJ45 12V-20VAC AC1 AC1 AC1 AC2 AC2 AC2

Connecttomodule Mini-DIN6-pin Connectiontothecomponents

+12V +12V RxD TxD GND GND

ARTICLE NAME CONNECTOR TYPE APPLICATION 1 2 3 4 5 6 7 8

Connecttomodule Mini-DIN6-pin Connectiontothecomponents

+12V +12V RxD TxD GND GND

2.6.2 PIN ASSIGNMENT FOR THE CARD READERS (Connectorsdependentontherespectivecardreader):

2.6.3 PIN ASSIGNMENT FOR THE RFID READER

2.7 EARTH

ItmustbeensuredthatthecorrectearthisinplacebetweenthedavinciIIIVENDINGmoduleandtheslotreader.

Figure:EarthingexampledavinciIIIVENDING

2.6 PIN ASSIGNMENT FOR THE CONNECTORS 2.6.1 PIN ASSIGNMENT FOR THE DAVINCI III VENDING MODULE

ARTICLE NAME CONNECTOR TYPE APPLICATION 1 2 3 4 5 6 7 8

Power Screw/plugconnection 5VDCSupply(Aux) VCC GND

Comm RJ45 Ethernet Tx+ Tx- Rx+ Rx-

ECR RJI2 Cashregisterinterface

UinExt+12V

UinExt+12V

RxD TxD GND GND

USBtype1.1 StandardtypeAStandardtypeB

Hostanddevice +5V D- D+ GND

Connecttomodule Mini-DIN6-pin Connectiontothecomponents

+12V +12V RxD TxD GND GND

Page 10: INTEGRATION GUIDE DAVINCI III VENDING - SIX · The davinci III VENDING module is powered using the hybrid slot reader, a mains adapter or a vending machine. In such instances, additional

10

3 TERMINAL INSTALLATION

Followingtheproperinstallationoftheterminal,thismustthenbeactivatedandputintooperationwiththecorrespondingparameters.

PLEASE NOTEIfthecommunicationofthedavinciIIIVENDINGisexecutedviaavendingmachine,theterminal’soperationmaydifferfromtheseinstructions.

ECR Integration?Standalone Cash register-autonomous installationECR Integrated Cashregister-integratedinstallation

ECR ConnectionRS.232 Connection to cash register via RS.232LAN ConnectiontocashregisterviaLANUSB ConnectiontocashregisterviaUSB

ECR PORT SpeedDetect Interface speed11520057600

Network InterfaceLAN Terminal communication directly via LAN

IP ConfigurationDHCP Obtains the IP address from the DHCP server and displays it -> continue with OKStatic IP Mustalsobestatedandprepareduponactivationaccordingly

Server lP-Address default DNS address for Internet communicationserv.ep2.telekurs.com Othercommunicationtypes(PrivateNet,Point-to-Point)

mustbeenteredmanuallyandconfirmedusingOK.

Server TCP Port Nummer8953 This entry can be confirmed with OK

Terminal Identification Enter the specific Terminal ID here and confirm with OK

Inthefollowingsteps,thepossibleselectionofentriesisalsomadeusingthearrowbuttonandthenconfirmedwiththeOKbutton.

AfterenteringtheTerminalID,theterminalwillbeginwiththesoftwaredownload,configurationandinitialisation.Assoonastheword“Welcome”andthecardbrandsappearonthedisplay,theterminalisreadyforoperation.

Page 11: INTEGRATION GUIDE DAVINCI III VENDING - SIX · The davinci III VENDING module is powered using the hybrid slot reader, a mains adapter or a vending machine. In such instances, additional

11

4 MENU – FUNCTION OVERVIEW

Theterminalmustbeapprovedinadvancebythevendingmachineinorderforthesefunctionstobeselected.

(MPDCommand:4 – 1ActivatetheServiceMenuontheterminal)

Followingtheapproval,theterminalpasswordmustbeentered.Everyterminalhasonepasswordwhichisdefinedasperthecustomer’srequestuponactivation.

ThefollowingmenustructurescanbeselectedwiththearrowbuttonandthenconfirmedwiththeOKbutton.ItispossibletogobackonelevelbypressingtheSTOPbutton.

4.1 HW TEST MENU

UserscanfindthisHWtestmenuasfollows:FollowingaPowerUpthe“MENU”buttonmustbepressedasthewhitescreenisbeing setup.Thereafter,theuserisrequestedtoenterthe“Z”password.

MENU ITEMS

1 TestPINpad Everybuttonmustbepressed1x.

2 Testexternalreader Thecardisread10x

3 Listofinstalledfirmware ListofinstalledSWmodules

4 Exit Abort

Closings Daily closing statement DailyclosingstatementisexecutedmanuallyQueries Data transmission TransactiondataistransferredSettingsSetup Trx storage Displaysthetransactionlogintheterminal

Language TerminallanguagecanbechangedD/E/I/FatpresentService PW Withoutfunction

Configuration TriggersconfigurationmanuallyInitialisation TriggersinitialisationmanuallySWUpdate TriggersasoftwareupdatemanuallyTrm Reset Theterminalisclearedandreactivated.Passwordrequired1235789

Info showsTID.SW.ep2versionon

Page 12: INTEGRATION GUIDE DAVINCI III VENDING - SIX · The davinci III VENDING module is powered using the hybrid slot reader, a mains adapter or a vending machine. In such instances, additional

12

5 DISMANTLING PROTECTION

5.1 DISPLAY INFORMATION

InaccordancewithinternationalPCIregulations,theindividualcomponentsofthedavinciVENDINGterminalhavebeenequippedwithdismantlingprotection.Thisisintendedtopre-ventitfrombeingdismantledandmodifiedwithmalicious

intentduringoperation,beforethenbeingputbackintooperation.Forthisreason,thedismantledpartsmustalwaysbereturnedtoSIXPaymentServicesinorderforthesetobereactivated.

Thedismantlingprotectionconsistsofelectroniccontacts,whicharelocatedonthedevicefrontandcanonlybeactivatedwhenthecomponentsaremountedcorrectly.Whetherornot

thedismantlingprotectionofacomponentisactivecanbedeterminedbasedonthestatusinformationshownonthedisplay:

DISPLAY DESCRIPTION HELP

Tampered(0)Tampered(2)

•ThesecurityapparatusoftheVENDINGmodulewastriggeredor tamperedwith

•ReturntheVENDINGmoduletoSIXPaymentServices

ReaderTampered(0)ReaderTampered(2)

•Thesecurityapparatusofthereaderwastriggeredordamaged

•ReturnthereadertoSIX PaymentServices

Notmounted(4) •TheVENDINGmoduleisnotmountedcorrectly •Checkthecontactsonthedismantlingprotection•Activationpossiblefollowingcorrectmounting

Readernotmounted(4) •Thereaderisnotmountedcorrectly•Themouthpieceisnotmountedcorrectly

•Activationpossiblefollowingcorrectmounting•Youmayneedtocheckthecontactsonthedis-mantlingprotectionand/orthemouthpiecemount

Notactivated(5) •ThedismantlingprotectionfortheVENDINGmodulehasnotbeenactivated

•Carryoutactivation

Readernotactivated(5) •Thedismantlingprotectionforthereaderhasnotyetbeenactivated

•Carryoutactivation

Notmounted(7) •TheVENDINGmoduleisnotmountedcorrectly•TheVENDINGmodulewasremoved

•DevicemustbereturnedtoSIX PaymentServicesforreactivation

Readernotmounted(7) •Thereaderisnotmountedcorrectly•Thereaderwasremoved•Themouthpieceisnotmountedcorrectly

•DevicemustbereturnedtoSIX PaymentServicesforreactivation

Notactivated(8) •ThedismantlingprotectionfortheVENDINGmodulehas beenre-closed•Apasswordisrequiredforitsreactivation•Whilstitisinthisstate,notransactionsarepossible

•DevicemustbereturnedtoSIX PaymentServicesforreactivation

Readernotactivated(8) •Thedismantlingprotectionforthereaderhasbeenre-closed•Apasswordisrequiredforitsreactivation•Whilstitisinthisstate,notransactionsarepossible

•DevicemustbereturnedtoSIX PaymentServicesforreactivation

Page 13: INTEGRATION GUIDE DAVINCI III VENDING - SIX · The davinci III VENDING module is powered using the hybrid slot reader, a mains adapter or a vending machine. In such instances, additional

13

•Ifthesiliconesealisnotmountedcorrectly,thedevicemustbereturned(seeexample:davinci2VENDING).

•Thesiliconesealismountedcorrectly,thedeviceiswatertightandcanbemounted(example:davinci IIIVENDING).

•Theflexcableisverysensitiveandmustnotbebentorcontacted.

•Thereshouldbenogapbetweenthecardreaderandthemouthpiece.

5.2 REPLACING THE VENDING MODULE

WhenreplacingtheVENDINGmoduleitisimportanttonotethatthecardreadermustalsobereplaced.Otherwise,itisnolongertechnicallypossibletoexecute“Plaintext”PINverificationsagainstchipcards,whichhaveanSDAchip

(staticdataauthentication).Thesewouldthen,undercertaincircumstances,nolongerfunctioncorrectly.TheSwissMaestrocardisnotaffectedbythis.

5.3 TEST – INSTALLATION WITHOUT ACTIVATION

5.4 HELP WITH MOUNTING AND ASSEMBLY

Duringamenuqueryregardingactivation,theprocesscanbecancelledbypressingtheSTOPbuttonandthenenteringtheZ password.Indoingso,thestatusofthedismantlingprotectionwillnotbequeriedoramended.Inthismode,theterminalcanbeputintooperationand,e.g.initialised.

Important: Inthismode,notransactionsarepossible.Byexe-cutingarepeatPowerUp,theuseristhentakentothesame“Activationmenu”again.

!

Page 14: INTEGRATION GUIDE DAVINCI III VENDING - SIX · The davinci III VENDING module is powered using the hybrid slot reader, a mains adapter or a vending machine. In such instances, additional

14

6 DAVINCI SAFE

AssemblyinstructionsforthedavinciSAFEterminal.

UnlockingHousing

Loosenthe4nuts

Baseplateassembly

Upperbracket

Openhousing.Attention–considerthedirection

Page 15: INTEGRATION GUIDE DAVINCI III VENDING - SIX · The davinci III VENDING module is powered using the hybrid slot reader, a mains adapter or a vending machine. In such instances, additional

six-payment-services.comworldline.com

110.0653.02INT_EN/11.2020

YOUR LOCAL POINT OF CONTACT CAN BE FOUND AT:six-payment-services.com/contact