intel nm process for embedded applications
TRANSCRIPT
Order Number: 315345-003US
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsThermal Design Guide
August 2007
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsTDG August 20072 Order Number: 315345-003US
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. EXCEPT AS PROVIDED IN INTEL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY RELATING TO SALE AND/OR USE OF INTEL PRODUCTS, INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT, OR OTHER INTELLECTUAL PROPERTY RIGHT.
Intel Corporation may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights that relate to the presented subject matter. The furnishing of documents and other materials and information does not provide any license, express or implied, by estoppel or otherwise, to any such patents, trademarks, copyrights, or other intellectual property rights.
Intel products are not intended for use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility applications.
Intel may make changes to specifications and product descriptions at any time, without notice.
Designers must not rely on the absence or characteristics of any features or instructions marked “reserved” or “undefined.” Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them.
The Intel® Core™2 Duo processor on 65 nm process for Embedded Applications may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are available on request.
Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.
Copies of documents which have an ordering number and are referenced in this document, or other Intel literature may be obtained by calling 1-800-548-4725 or by visiting Intel's website at http://www.intel.com.
AnyPoint, AppChoice, BoardWatch, BunnyPeople, CablePort, Celeron, Chips, CT Media, Dialogic, DM3, EtherExpress, ETOX, FlashFile, i386, i486, i960, iCOMP, InstantIP, Intel, Intel Centrino, Intel logo, Intel386, Intel486, Intel740, IntelDX2, IntelDX4, IntelSX2, Intel Create & Share, Intel GigaBlade, Intel InBusiness, Intel Inside, Intel Inside logo, Intel NetBurst, Intel NetMerge, Intel NetStructure, Intel Play, Intel Play logo, Intel SingleDriver, Intel SpeedStep, Intel StrataFlash, Intel TeamStation, Intel Xeon, Intel XScale, IPLink, Itanium, MCS, MMX, MMX logo, Optimizer logo, OverDrive, Paragon, PC Dads, PC Parents, PDCharm, Pentium, Pentium II Xeon, Pentium III Xeon, Performance at Your Command, RemoteExpress, SmartDie, Solutions960, Sound Mark, StorageExpress, The Computer Inside., The Journey Inside, TokenExpress, VoiceBrick, VTune, and Xircom are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.
*Other names and brands may be claimed as the property of others.
Copyright © 2007, Intel Corporation. All Rights Reserved.
Intel® Core™2 Duo processor—Contents
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsTDG August 20073 Order Number: 315345-003US
Contents
1.0 Introduction ................................................................................................................ 61.1 Design Flow ....................................................................................................... 61.2 Definition of Terms ............................................................................................. 71.3 Reference Documents.......................................................................................... 81.4 Thermal Design Tool Availability ........................................................................... 8
2.0 Package Information .................................................................................................... 9
3.0 Thermal Specifications.................................................................................................143.1 Thermal Design Power........................................................................................143.2 Maximum Allowed Component Temperature ..........................................................14
4.0 Mechanical Specifications .............................................................................................154.1 Package Mechanical Requirements .......................................................................15
4.1.1 Die Pressure/Load Upper Limit..................................................................154.1.2 Die Pressure/Load Lower Limit..................................................................15
4.2 Package Keep Out Zones Requirements ................................................................154.3 Board Level Keep Out Zone Requirements.............................................................15
5.0 Thermal Solution Requirements ....................................................................................195.1 Thermal Solution Characterization........................................................................19
5.1.1 Calculating the Required Thermal Performance for the Intel® Core™2 Duoprocessor ..............................................................................................20
6.0 Reference Thermal Solutions ........................................................................................226.1 ATCA Reference Thermal Solution ........................................................................226.2 Keep Out Zone Requirements ..............................................................................236.3 Thermal Performance .........................................................................................236.4 1U+ Reference Heatsink .....................................................................................23
6.4.1 Keep Out Zone Requirements ...................................................................246.4.2 Thermal Performance ..............................................................................24
6.5 Compact PCI Reference Heatsink .........................................................................256.5.1 Keep Out Zone Requirements ...................................................................266.5.2 Thermal Performance ..............................................................................26
6.6 Heatsink Fastener Assembly................................................................................276.7 Thermal Interface Material (TIM) .........................................................................276.8 Heatsink Orientation ..........................................................................................28
7.0 Thermal Metrology ......................................................................................................297.1 Die Temperature Measurements ..........................................................................297.2 Power Simulation Software .................................................................................297.3 Additional Thermal Features ................................................................................297.4 Local Ambient Temperature Measurement Guidelines..............................................30
7.4.1 Active Heatsink Measurements .................................................................307.4.2 Passive Heatsink Measurements................................................................30
8.0 Reliability Guidelines ...................................................................................................33
A Thermal Solution Component Suppliers..........................................................................34
B Mechanical Drawings ...................................................................................................35
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsAugust 2007 TDGOrder Number: 315345-003US 4
Figures—Intel® Core™2 Duo processor
Figures1 Thermal Design Process ..............................................................................................72 Micro-FCBGA Package (Sheet 1 of 2) .......................................................................... 103 Micro-FCBGA Package (Sheet 2 of 2) .......................................................................... 114 Micro-FCPGA Package (Sheet 1 of 2) .......................................................................... 125 Micro-FCPGA Package (Sheet 2 of 2) .......................................................................... 136 Primary Side Keep Out Zone Requirements— Micro-FCPGA ............................................ 167 Primary Side Keep Out Zone Requirements— Micro-FCBGA............................................ 178 Secondary Side Keep Out Zone Requirements.............................................................. 189 Processor Thermal Characterization Parameter Relationships ......................................... 2010 AdvancedTCA* Reference Heatsink Assembly............................................................... 2211 AdvancedTCA* Heatsink Thermal Performance vs. Volumetric Airflow Rate ...................... 2312 1U Reference Heatsink Assembly ............................................................................... 2413 1U Heatsink Thermal Performance vs. Volumetric Airflow Rate ....................................... 2514 CompactPCI Reference Heatsink Assembly .................................................................. 2615 cPCI Reference Heatsink Thermal Performance vs. Volumetric Flow Rate ......................... 2716 Heatsink Orientation Relative to Airflow Direction ......................................................... 2817 Measuring TLA with an Active Heatsink ....................................................................... 3118 Measuring TLA with a Passive Heatsink ....................................................................... 3219 AdvancedTCA* Reference Heatsink PCB Keep Out Zone Requirements (Sheet 1 of 2) ........ 3620 AdvancedTCA* Reference Heatsink PCB Keep Out Zone Requirements (Sheet 2 of 2) ........ 3721 AdvancedTCA* Reference Heatsink Assembly............................................................... 3822 AdvancedTCA* Reference Heatsink............................................................................. 3923 CompactPCI* Reference Heatsink PCB Keep Out Zone Requirements (Sheet 1 of 2) .......... 4024 CompactPCI* Reference Heatsink PCB Keep Out Zone Requirements (Sheet 2 of 2) .......... 4125 CompactPCI* Reference Heatsink Assembly................................................................. 4226 CompactPCI* Reference Heatsink............................................................................... 4327 1U Reference Heatsink PCB Keep Out Requirements (Sheet 1 of 2)................................. 4428 1U Reference Heatsink PCB Keep Out Requirements (Sheet 2 of 2)................................. 4529 1U Reference Heatsink Assembly ............................................................................... 4630 1U Reference Heatsink.............................................................................................. 47
Tables1 Definition of Terms.....................................................................................................72 Thermal Specifications for the Intel® Core™2 Duo processor.......................................... 143 Required Heatsink Thermal Performance (ΨJA) ............................................................. 214 Reliability Requirements............................................................................................ 335 Reference Heatsink .................................................................................................. 346 Mechanical Drawings ................................................................................................ 35
Intel® Core™2 Duo processor—Tables
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsTDG August 20075 Order Number: 315345-003US
Revision History
Date Revision Description
August 2007 003
Revised die pressure & load specification, Section 4.1, “Package Mechanical Requirements” on page 15Added Intel® Core™2 Duo processor SKUs T7500, L7500 and U7500 to Table 2, “Thermal Specifications for the Intel® Core™2 Duo processor” on page 14.
February 2007 002
Added Intel® Core™2 Duo processor L7400 SKU to Table 2, “Thermal Specifications for the Intel® Core™2 Duo processor” on page 14.Added third reference heatsink for CompactPCI (cPCI) applications.Added Section 6.5, “Compact PCI Reference Heatsink” on page 25.Added Figure 14 and Figure 15.Added four CompactPCI drawings to Appendix B, “Mechanical Drawings”.
September 2006 001 Initial public release
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsAugust 2007 TDGOrder Number: 315345-003US 6
Introduction—Intel® Core™2 Duo processor
1.0 Introduction
The power dissipation of electronic components has risen along with the increase in complexity of computer systems. To ensure quality, reliability, and performance goals are met over the product’s life cycle, the heat generated by the device must be properly dissipated. Typical methods to improve heat dissipation include selective use of airflow ducting, and/or the use of heatsinks.
The goals of this document are to:
• Specify the thermal and mechanical specification for the device.
• Describe a reference thermal solution that meets the specifications.
A properly designed thermal solution will adequately cool the device at or below the thermal specification. This is accomplished by providing a suitable local-ambient temperature, ensuring adequate local airflow, and minimizing the die to local-ambient thermal resistance. Operation outside the functional limits can degrade system performance and may cause permanent changes in the operating characteristics of the component.
This document describes thermal design guidelines for the Intel® Core™2 Duo processor on 65 nm process for Embedded Applications in the micro Flip Chip Pin Grid Array (micro-FCPGA) package and the micro Flip Chip Ball Grid Array (micro-FCBGA) package. The information provided in this document is for reference only and additional validation must be performed prior to implementing the designs into final production. The intent of this document is to assist each original equipment manufacturer (OEM) with the development of thermal solutions for their individual designs. The final heatsink solution, including the heatsink, attachment method, and thermal interface material (TIM) must comply with the mechanical design, environmental, and reliability requirements delineated in the processor datasheet. It is the responsibility of each OEM to validate the thermal solution design with their specific applications.
This document addresses thermal and mechanical design specifications for Intel Core 2 Duo processors only. For thermal design information on other Intel components, refer to the respective component datasheet.
1.1 Design Flow
Several tools are available from Intel to assist in the development of a reliable, cost-effective thermal solution. Figure 1 illustrates a typical thermal solution design process with available tools noted. The tools are available through your local Intel field sales representative.
Intel® Core™2 Duo processor—Introduction
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsTDG August 20077 Order Number: 315345-003US
1.2 Definition of Terms
Figure 1. Thermal Design Process
Table 1. Definition of Terms (Sheet 1 of 2)
Term Definition
FCPGA Flip Chip Pin Grid Array. A pin grid array packaging technology where the die is exposed on the package substrate.
FCBGA Flip Chip Ball Grid Array. A ball grid array packaging technology where the die is exposed on the package substrate.
TJUNCTION-MAX Maximum allowed component (junction) temperature. Also referred to as TJ-MAX
TDP Thermal Design Power. Thermal solutions should be designed to dissipate this target power level.
TLALocal ambient temperature. This is the temperature measured inside the chassis, approximately 1 inch upstream of a component heatsink. Also referred to as TA.
ΨJA
Junction-to-ambient thermal characterization parameter. A measure of heatsink thermal performance using the total package power. Defined as (T JUNCTION – TLA) / Total Package Power
ΨTIM
Thermal interface material thermal characterization parameter. A measure of thermal interface material performance using total package power. Defined as (T CASE – T JUNCTION)/ Total Package Power. Also referred to as ΨJS.
ΨSA
Sink-to-ambient thermal characterization parameter. A measure of heatsink thermal performance using total package power. Defined as (T SINK – T JUNCTION)/ Total Package Power.
°C Degrees in Celsius
CFM Volumetric airflow rate in cubic feet per minute
in. Inches
LFM Airflow velocity in linear feet per minute
PCB Printed circuit board
TSINK Heatsink temperature measured on the underside of the heatsink base.
• Package Level Thermal Models • Thermal Model User’s Guide
Step 1: Thermal Simulation
• Reference Heatsinks • Reference Mounting Hardware • Vendor Contacts
Step 2: Heatsink Design and Selection
Step 3: Thermal Validation
• Thermal Testing Software • Thermal Test Vehicle • User Guides
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsAugust 2007 TDGOrder Number: 315345-003US 8
Introduction—Intel® Core™2 Duo processor
1.3 Reference Documents
The reader of this specification should also be familiar with material and concepts presented in the following documents:
• Intel® Core™2 Duo processor for Intel Centrino Duo Mobile Technology Datasheet
Documents are located at developer.intel.com. Contact your Intel field sales representative for more additional information.
1.4 Thermal Design Tool Availability
Intel provides thermal simulation models of the device and a thermal model user’s guide to aid system designers in simulating, analyzing, and optimizing thermal solutions in an integrated, system-level environment. The models are for use with commercially available Computational Fluid Dynamics (CFD)-based thermal analysis tools including Flotherm* (version 3.1 or higher) by Flomerics, Inc. or Icepak* by Fluent, Inc. Contact your Intel representative to order the thermal models and associated user’s guides.
TIMThermal Interface Material – the thermally conductive compound between the heatsink and die. This material fills air gaps and voids, and enhances spreading of the heat from the die to the heatsink.
U A unit of measure used to define server rack spacing height. 1U is equal to 1.75 inches, 2U equals 3.50 inches, etc.
W Watt
Table 1. Definition of Terms (Sheet 2 of 2)
Term Definition
Intel® Core™2 Duo processor—Package Information
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsTDG August 20079 Order Number: 315345-003US
2.0 Package Information
The Intel® Core™ Duo processor utilizes a 35 x 35 mm, 478-pin micro-FCPGA package (refer to Figure 2 and Figure 3) and the 479-ball micro-FCBGA package (refer to Figure 4 and Figure 5). The data is provided for reference only. Refer to the device’s most recent datasheet for up-to-date information. In the event of conflict, the device’s datasheet supersedes data shown in these figures.
The processors in the micro-FCPGA package connect to the motherboard through a 479-pin surface mount, zero insertion force (ZIF) socket. A description of the socket can be found in the Intel® Mobile Processor Micro-FCPGA Socket (mPGA479M) Design Guidelines.
The Micro-FCBGA package incorporates land-side capacitors. The land-side capacitors are electrically conductive, care should be taken to avoid contacting the capacitors with any other electrically conductive materials. Doing so may short the capacitors and possibly damage the device or render it inactive.
The processor package has mechanical load limits that are specified in the processor datasheet. These load limits should not be exceeded during heatsink installation, removal, mechanical stress testing, or standard shipping conditions. The heatsink mass can also add additional dynamic compressive load to the package during a mechanical shock event. Amplification factors due to the impact force during shock must be taken into account in dynamic load calculations. The total combination of dynamic and static compressive load should not then exceed the processor datasheet compressive dynamic load specification during a vertical shock. It is not recommended to use any portion of the processor substrate as a mechanical reference or load bearing surface in either static or dynamic compressive load conditions.
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsAugust 2007 TDGOrder Number: 315345-003US 10
Package Information—Intel® Core™2 Duo processor
Figure 2. Micro-FCBGA Package (Sheet 1 of 2)
Intel® Core™2 Duo processor—Package Information
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsTDG August 200711 Order Number: 315345-003US
Figure 3. Micro-FCBGA Package (Sheet 2 of 2)
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsAugust 2007 TDGOrder Number: 315345-003US 12
Package Information—Intel® Core™2 Duo processor
Figure 4. Micro-FCPGA Package (Sheet 1 of 2)
Intel® Core™2 Duo processor—Package Information
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsTDG August 200713 Order Number: 315345-003US
Figure 5. Micro-FCPGA Package (Sheet 2 of 2)
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsAugust 2007 TDGOrder Number: 315345-003US 14
Thermal Specifications—Intel® Core™2 Duo processor
3.0 Thermal Specifications
3.1 Thermal Design Power
The Thermal Design Power (TDP) specification is listed in Table 2. Heat transfer through the micro-FCBGA, micro-FCPGA package and socket via the base board is negligible. The cooling capacity without a thermal solution is also minimal, so Intel requires the use of a heatsink for all usage conditions.
3.2 Maximum Allowed Component Temperature
The device must maintain a maximum temperature at or below the value specified in Table 2. The thermal solution is required to meet the temperatures specification while dissipating the Thermal Design Power.
=
Table 2. Thermal Specifications for the Intel® Core™2 Duo processor
CPU # of cores Processor # Frequency (GHz) TDP (W) TJ-MAX
(°C)TJ-MIN
(°C)
Intel® Core™2 Duo processor
2 T7500 2.2 35
100 0
2 T7400 2.16 34
2 L7500 1.6 17
2 L7400 1.50 17
2 U7500 1.06 10
Intel® Core™2 Duo processor—Mechanical Specifications
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsTDG August 200715 Order Number: 315345-003US
4.0 Mechanical Specifications
4.1 Package Mechanical Requirements
4.1.1 Die Pressure/Load Upper Limit
From a die mechanical integrity standpoint, the maximum allowable normal die load is the lesser of 15 lbs or 100 psi. Considering the 15 lbs load limit and the nominal die area of 1.45 cm2 (0.22 in2), this equates to a die pressure of 66.7 psi (below 100 psi specification). Considering the maximum pressure specification, the die load at this pressure would be 22.4 lbs, exceeding the 15 lbs. load limit. Thus, the heatsink clamping mechanism (spring loaded fasteners, spring clips, etc.) should not exceed 15 lbs.
4.1.2 Die Pressure/Load Lower Limit
From a TIM performance standpoint, a minimum die pressure is required to ensure consistent and minimal TIM thermal resistance. This lower value is a function of the TIM used. For the phase-change TIM specified for thermal solutions mentioned later, die pressure should not be lower than approximately 138 kPa (20 psi). This will keep TIM resistance better than approximately 0.30 oC-cm2/W.
4.2 Package Keep Out Zones Requirements
The heatsink must not touch the package in the areas shown in Figure 2 and Figure 4. The heatsink should include a means to prevent the heatsink from forming an electrical short with the capacitors placed on the top side of the package. The reference thermal solutions include z-stops machined into the base of the heatsink. The z-stops prevent the heatsink from inadvertently tilting when installed. Other methods are suitable including using electrically insulated gasket material at the base of the heatsink.
4.3 Board Level Keep Out Zone Requirements
A general description of the keep-out zones and mounting hole pattern for the reference thermal solutions are shown in Figure 6 and Figure 7. Detailed drawings for the PCB keep out zones are contained in Appendix B.
Components placed between the underside of the heatsink and motherboard cannot exceed 4.75 mm in height when using heatsinks that extend beyond the socket envelope shown in Figure 2 for the micro-FCPGA package.
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsAugust 2007 TDGOrder Number: 315345-003US 16
Mechanical Specifications—Intel® Core™2 Duo processor
Notes:1. Dimension in millimeters [inches].
Figure 6. Primary Side Keep Out Zone Requirements— Micro-FCPGA
Intel® Core™2 Duo processor—Mechanical Specifications
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsTDG August 200717 Order Number: 315345-003US
Notes:1. Dimension in millimeters [inches].
Figure 7. Primary Side Keep Out Zone Requirements— Micro-FCBGA
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsAugust 2007 TDGOrder Number: 315345-003US 18
Mechanical Specifications—Intel® Core™2 Duo processor
Notes:1. Dimension in millimeters [inches].
Figure 8. Secondary Side Keep Out Zone Requirements
Intel® Core™2 Duo processor—Thermal Solution Requirements
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsTDG August 200719 Order Number: 315345-003US
5.0 Thermal Solution Requirements
5.1 Thermal Solution Characterization
The thermal characterization parameter, Ψ (“psi”), is used to characterize thermal solution performance, as well as compare thermal solutions in identical situations (i.e., heating source, local ambient conditions, etc.). It is defined by the following equation:
ΨJA = Junction-to-local ambient thermal characterization parameter (°C/W)
TJUNCTION MAX = Maximum allowed device temperature (°C)
T A = Local ambient temperature near the device (°C) (see Section Thermal Metrology for measurement guidelines)
TDP = Thermal Design Power (W)
The thermal characterization parameter assumes that all package power dissipation is through the thermal solution (heatsink), and is equal to TDP. A small percentage of the die power (< 5%) is dissipated through the package/socket/motherboard stack to the environment, and should not be considered as a means of thermal control.
The junction-to-local ambient thermal characterization parameter, ΨJA, is comprised of ΨJS, which includes the thermal interface material thermal characterization parameter, and of ΨSA, the sink-to-local ambient thermal characterization parameter:
Where:
ΨJS = Thermal characterization parameter from junction-to-sink, this also includes thermal resistance of the thermal interface material (ΨTIM) (°C/W).
ΨSA = Thermal characterization parameter from sink-to-local ambient (°C/W)
ΨSA is a measure of the thermal characterization parameter from the bottom of the heatsink to the local ambient air. ΨSA is dependent on the heatsink material, thermal conductivity, and geometry. It is also strongly dependent on the air velocity through the fins of the heatsink. Figure 9 illustrates the combination of the different thermal characterization parameters.
Equation 1. Junction-to-Local Ambient Thermal Characterization Parameter (ΨJA)
TDP
TT AJJA
−=Ψ
Equation 2. Junction-to-Local Ambient Thermal Characterization Parameter
ΨJA = ΨJS + ΨSA
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsAugust 2007 TDGOrder Number: 315345-003US 20
Thermal Solution Requirements—Intel® Core™2 Duo processor
5.1.1 Calculating the Required Thermal Performance for the Intel® Core™2 Duo processor
Overall thermal performance, ΨJA, is then defined using the thermal characterization parameter:
• Define a target component temperature TJUNCTION and corresponding TDP.
• Define a target local ambient temperature, TA.
The following provides an illustration of how to determine the appropriate performance targets.
Assume:
• TDP = 34 W and TJUNCTION = 100° C
• Local processor ambient temperature, TA = 40° C.
Using Equation 1, the maximum allowable resistance, junction-to-ambient, is calculated as:
To determine the required heatsink performance, a heatsink solution provider would need to determine ΨCA performance for the selected TIM and mechanical load configuration. If the heatsink solution were designed to work with a TIM material performing at ΨTIM ≤ 0.50 °C/W, solving from Equation 2, the performance of the heatsink required is:
Figure 9. Processor Thermal Characterization Parameter Relationships
T S
T J
T A
Ψ SA
Ψ
Ψ
TIM
Device
T S
T A
Ψ SA
Ψ TIM
Ψ JA HEATSINK
Equation 3. Maximum Allowable Resistance
WCTDP
TT oAJJA /76.1
34
40100 =−=−=Ψ
Intel® Core™2 Duo processor—Thermal Solution Requirements
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsTDG August 200721 Order Number: 315345-003US
It is evident from the above calculations that a reduction in the local ambient temperature can have a significant effect on the junction-to-ambient thermal resistance requirement. This effect can contribute to a more reasonable thermal solution including reduced cost, heatsink size, heatsink weight, or a lower system airflow rate.
Table 3 summarizes the thermal budget required to adequately cool the Intel® Core™2 Duo processor on 65 nm process. Since the data is based on air data at sea level, a correction factor would be required to estimate the thermal performance at other altitudes.
Equation 4. Required Performance of the Heatsink
WCoJSJASA /26.150.076.1 =−=Ψ−Ψ=Ψ
Table 3. Required Heatsink Thermal Performance (ΨJA)
Device Frequency (GHz)
TDP (W)
Ψ JA (ºC/W) at TA = 40º C
Ψ JA (ºC/W) at TA = 55º C
Intel® Core™2 Duo processor
2.20 35 1.71 1.29
2.16 34 1.76 1.32
1.50 & 1.60 17 3.53 2.65
1.06 10 6.0 4.5
Notes:1. TA is defined as the local (internal) ambient temperature measured approximately 1 inch
upstream from the device.
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsAugust 2007 TDGOrder Number: 315345-003US 22
Reference Thermal Solutions—Intel® Core™2 Duo processor
6.0 Reference Thermal Solutions
Intel has developed reference thermal solutions designed to meet the cooling needs of embedded form factor applications. This chapter describes the overall requirements for the reference thermal solution including critical-to-function dimensions, operating environment, and verification criteria. This document details solutions that are compatible with the AdvancedTCA* and Server System Infrastructure (1U and larger) form factors.
The data in this section is based on wind tunnel testing of the reference thermal solutions. The heatsinks were tested as an assembly with a thermal test vehicle (TTV), phase-change TIM, socket and test board. The test assembly is placed in a rectangular duct with no upstream obstructions. Air flow is measured by means of a calibrated nozzle downstream of the unit under test. The Ψ values shown in the charts to follow represent the mean resistance values plus the one-sided, 99% confidence interval.
6.1 ATCA Reference Thermal Solution
The AdvancedTCA reference thermal solution is shown in Figure 10. The maximum component height for this form factor is 21.33 mm, so the maximum heatsink height is constrained to 16.27 mm. The heatsink uses the fastener assembly (refer to Section 6.6) to mount to the PCB. Detailed drawings of this heatsink are provided in Appendix B, “Mechanical Drawings”.
Figure 10. AdvancedTCA* Reference Heatsink Assembly
Intel® Core™2 Duo processor—Reference Thermal Solutions
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsTDG August 200723 Order Number: 315345-003US
6.2 Keep Out Zone Requirements
The keep out zone requirements on the PCB to use this heatsink are detailed in Appendix B, “Mechanical Drawings”. Because it extends beyond the footprint of the device, it is critical for the board designer to allocate space on the board for the heatsink.
6.3 Thermal Performance
The AdvancedTCA reference heatsink is an all copper (C1100) design. The heatsink was tested at flow rates from 10 CFM to 30 CFM as shown in Figure 11. For a 40 °C external ambient and 34W TDP (ψja = 1.76 °C/W), the heatsink will meet the thermal performance needed to when the air flow rate is at least 10 CFM. If the external ambient is 55°C (ψja = 1.32 °C/W), this heatsink will be suitable if the air flow rate is at least 15 CFM.
6.4 1U+ Reference Heatsink
The 1U reference thermal solution is shown in Figure 14. The maximum heatsink height is constrained to 27 mm. The heatsink uses the fastener assembly (refer to Section 6.6) to mount to the PCB. Detailed drawings of this heatsink are provided in Appendix B, “Mechanical Drawings”.
Figure 11. AdvancedTCA* Heatsink Thermal Performance vs. Volumetric Airflow Rate
ATCA Reference Heatsink Performance(99% CI)
0.00
0.20
0.40
0.60
0.80
1.00
1.20
1.40
1.60
1.80
2.00
5 10 15 20 25 30 35
Volumetric Air Flow Rate (CFM)
PS
I (C
/W)
psi_ja
psi_sa
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsAugust 2007 TDGOrder Number: 315345-003US 24
Reference Thermal Solutions—Intel® Core™2 Duo processor
6.4.1 Keep Out Zone Requirements
The keep out zone requirements on the PCB to use this heatsink are detailed in Appendix B, “Mechanical Drawings”. Because it extends beyond the footprint of the device, it is critical for board designers to allocate space for the heatsink.
6.4.2 Thermal Performance
The 1U reference heatsink employs a thick copper (C1100) base with aluminum (Al 1050) stamped fins, soldered to the base. The heatsink was tested at flow rates from 10 CFM to 25 CFM as shown in Figure 11. For a 40 °C external ambient and 34 W TDP (ψja = 1.76 °C/W), the heatsink will meet the thermal performance needed when the air flow rate is greater than 10 CFM. If the external ambient is 55° C (ψja = 1.32° C/W), this heatsink will be suitable if the air flow rate is approximately 14 CFM or greater.
Figure 12. 1U Reference Heatsink Assembly
Intel® Core™2 Duo processor—Reference Thermal Solutions
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsTDG August 200725 Order Number: 315345-003US
6.5 Compact PCI Reference Heatsink
The cPCI reference thermal solution is shown in Figure 12. The maximum heatsink height is constrained to 8.7 mm. The heatsink uses the fastener assembly (refer to Section 6.6) to mount to the PCB. Detailed drawings of this heatsink are provided in Appendix B, “Mechanical Drawings”.
Figure 13. 1U Heatsink Thermal Performance vs. Volumetric Airflow Rate
1U Reference Heatsink Performance (99% CI)
0.00
0.20
0.40
0.60
0.80
1.00
1.20
1.40
1.60
1.80
2.00
5 10 15 20 25 30
Volumetric Air Flow Rate (CFM)
PS
I (C
/W)
psi_ja
psi_sa
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsAugust 2007 TDGOrder Number: 315345-003US 26
Reference Thermal Solutions—Intel® Core™2 Duo processor
6.5.1 Keep Out Zone Requirements
The keep out zone requirements on the PCB to use this heatsink are detailed in Appendix B, “Mechanical Drawings”. Because it extends beyond the footprint of the device, it is critical for board designers to allocate space for the heatsink.
6.5.2 Thermal Performance
The cPCI reference heatsink is an all copper (C1100) design, intended for applications where vertical space is limited and the L7400 (17W TDP) processor is used. The heatsink was tested at 17W and flow rates from 4 CFM to 24 CFM as shown in Figure 15. For a 40 °C external ambient and 17W TDP (ψja = 3.53°C/W), the heatsink will meet the thermal performance needed to when the air flow rate is at least 4 CFM. If the external ambient is 55°C (ψja = 2.65°C/W), this heatsink will be suitable if the air flow rate is approximately 6 CFM.
Figure 14. CompactPCI Reference Heatsink Assembly
Intel® Core™2 Duo processor—Reference Thermal Solutions
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsTDG August 200727 Order Number: 315345-003US
6.6 Heatsink Fastener Assembly
The reference solutions use a screw, spring, and back plate assembly to attach the heatsink to the PCB. The fastener assembly used on the reference heatsink must apply the load conditions described in Section Package Mechanical Requirements. The fastener assembly must comply with all of the keep out zone requirements described in this document, and should not degrade the thermal performance of the reference heatsinks. Finally the fastener assembly should be designed to meet the reliability guidelines described in Section Section 8.0.
6.7 Thermal Interface Material (TIM)
The thermal interface material provides improved conductivity between the die and heatsink. It is important to understand and consider the impact of the interface between the die and heatsink base to the overall thermal solution. Specifically, the bond line thickness, interface material area, and interface material thermal conductivity must be selected to optimize the thermal solution.
It is important to minimize the thickness of the thermal interface material (TIM), commonly referred to as the bond line thickness. A large gap between the heatsink base and the die yields a greater thermal resistance. The thickness of the gap is determined by the flatness of both the heatsink base and the die, plus the thickness of the thermal interface material, and the clamping force applied by the heatsink attachment method. To ensure proper and consistent thermal performance, the TIM and application process must be properly designed.
Thermal interface materials have thermal impedance (resistance) that will increase over time as the material degrades. It is important for thermal solution designers to take this increase in impedance into consideration when designing a thermal solution. It is recommended that system integrators work with TIM suppliers to determine the performance of the desired thermal interface material. If system integrators wish to maintain maximum thermal solution performance, the TIM could be replaced during standard maintenance cycles.
Figure 15. cPCI Reference Heatsink Thermal Performance vs. Volumetric Flow Rate
cPCI Reference Heatsink Performance(99% CI)
0.00
0.50
1.00
1.50
2.00
2.50
3.00
3.50
0 4 8 12 16 20 24 28
Volumetric Air Flow Rate (CFM)
PS
I (C
/W)
psi_ja
psi_sa
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsAugust 2007 TDGOrder Number: 315345-003US 28
Reference Thermal Solutions—Intel® Core™2 Duo processor
The reference thermal solution uses Honeywell* PCM45F. Alternative materials can be used at the user’s discretion. Regardless, the entire heatsink assembly, including the heatsink, and TIM (including attach method), must be validated together for specific applications.
6.8 Heatsink Orientation
All of the heatsinks were designed to maximize the available space within the volumetric keep out zone and their respective form factor limitations. These heatsinks must be oriented in a specific direction relative to the processor keep out zone and airflow. In order to use these designs, the processor must be placed on the PCB in an orientation so the heatsink fins will be parallel to the airflow. Figure 16 illustrates this orientation.
Figure 16. Heatsink Orientation Relative to Airflow Direction
Intel® Core™2 Duo processor—Thermal Metrology
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsTDG August 200729 Order Number: 315345-003US
7.0 Thermal Metrology
The system designer must make temperature measurements to accurately determine the performance of the thermal solution. Validation of the processor’s thermal solution should be done using a thermal test vehicle (TTV). The TTV allows for an accurate junction temperature measurement as well as input power control. For more information, contact your Intel field sales representative.
In addition, the processors heatsink should be verified in a system environment. Intel has established guidelines for techniques to measure the component temperature. Section Die Temperature Measurements provides guidelines on how to accurately measure the component temperature. Section Power Simulation Software contains information on running an application program that will emulate anticipated maximum thermal design power.
7.1 Die Temperature Measurements
The component TJUNCTION must be maintained at or below the maximum temperature specification as noted in Section Maximum Allowed Component Temperature. The best way to measure die temperature is to use the Digital Thermal Sensor as described in the processor’s datasheet. Refer to the processor datasheet for more information on the DTS.
The legacy on-board thermal diode is not recommended for performing heatsink validation. The thermal diode is suitable for long term trending data, but is not a reliable indicator of the processor’s temperature.
7.2 Power Simulation Software
The power simulation software is a utility designed to dissipate the thermal design power on a processor. To assess the thermal performance of the processor thermal solution under “worst-case realistic application” conditions, Intel is developing a software utility that operates the processor at near worst-case power dissipation.
The power simulation software should only be used to test customer thermal solutions at or near the thermal design power. For power supply current, please refer to each component’s datasheet for the ICC (Max Power Supply Current) specification. For information on how to obtain the maximum power program, contact your Intel field sales representative
7.3 Additional Thermal Features
The Intel Core 2 Duo processor supports other thermal features including the Intel® Thermal Monitor, PROCHOT#, FORCEPR#, and THERMTRIP# signal pins. Details for using these features are contained in the processor datasheet.
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsAugust 2007 TDGOrder Number: 315345-003US 30
Thermal Metrology—Intel® Core™2 Duo processor
7.4 Local Ambient Temperature Measurement Guidelines
The local ambient temperature (TLA) is the temperature of the ambient air surrounding the processor. For a passive heatsink, TA is defined as the heatsink approach air temperature; for an actively cooled heatsink, it is the temperature of inlet air to the active cooling fan.
It is worthwhile to determine the local ambient temperature in the chassis around the processor to understand the effect it may have on the case temperature. TLA is best measured by averaging temperature measurements at multiple locations in the heatsink inlet airflow. This method helps reduce error and eliminate minor spatial variations in temperature. The following guidelines are meant to enable accurate determination of the localized air temperature around the processor during system thermal testing.
7.4.1 Active Heatsink Measurements
• It is important to avoid taking measurements in the dead flow zone that usually develops above the fan hub and hub spokes. Measurements should be taken at four different locations uniformly placed at the center of the annulus formed by the fan hub and the fan housing to evaluate the uniformity of the air temperature at the fan inlet. The thermocouples should be placed approximately 3 mm to 8 mm [0.1 to 0.3 in] above the fan hub vertically and halfway between the fan hub and the fan housing horizontally as shown in Figure 17 (avoiding the hub spokes).
• Using an open bench to characterize an active heatsink can be useful, and usually ensures more uniform temperatures at the fan inlet. However, additional tests that include a solid barrier above the test motherboard surface can help evaluate the potential impact of the chassis. This barrier is typically clear Plexiglas*, extending at least 100 mm [4 in.] in all directions beyond the edge of the thermal solution. Typical distance from the motherboard to the barrier is 81 mm [3.2 in.]. If a barrier is used, the thermocouple can be taped directly to the barrier with clear tape at the horizontal location as previously described, halfway between the fan hub and the fan housing.
• For even more realistic airflow, the motherboard should be populated with significant elements like memory cards, graphic card, and chipset heatsink. If a variable speed fan is used, it may be useful to add a thermocouple taped to the barrier above the location of the temperature sensor used by the fan to check its speed setting against air temperature. When measuring TLA in a chassis with a live motherboard, add-in cards, and other system components, it is likely that the TLA measurements will reveal a highly non-uniform temperature distribution across the inlet fan section.
Note: Testing an active heatsink with a variable speed fan can be done in a thermal chamber to capture the worst-case thermal environment scenarios. Otherwise, when doing a bench top test at room temperature, the fan regulation prevents the heatsink from operating at its maximum capability. To characterize the heatsink capability in the worst-case environment in these conditions, it is then necessary to disable the fan regulation and power the fan directly, based on guidance from the fan supplier.
7.4.2 Passive Heatsink Measurements
• Thermocouples should be placed approximately 13 mm to 25 mm [0.5 to 1.0 in] away from processor and heatsink as shown in Figure 18.
• The thermocouples should be placed approximately 51 mm [2.0 in] above the baseboard. This placement guideline is meant to minimize the effect of localized hot spots from baseboard components. The height above the board may vary depending on the height of the thermal solution and form factor.
Intel® Core™2 Duo processor—Thermal Metrology
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsTDG August 200731 Order Number: 315345-003US
Note: Drawing not to scale.
Figure 17. Measuring TLA with an Active Heatsink
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsAugust 2007 TDGOrder Number: 315345-003US 32
Thermal Metrology—Intel® Core™2 Duo processor
Note: Drawing not to scale.
Figure 18. Measuring TLA with a Passive Heatsink
Intel® Core™2 Duo processor—Reliability Guidelines
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsTDG August 200733 Order Number: 315345-003US
8.0 Reliability Guidelines
Each motherboard, heatsink, and attach combination may vary the mechanical loading of the component. The user should carefully evaluate the reliability of the completed assembly prior to use in high volume. Some general recommendations are shown in the table below.
Table 4. Reliability Requirements
Test1 Requirement Pass/Fail Criteria2
Mechanical Shock 50 g, board level, 11 msec, 3 shocks/axis Visual Check and Electrical Functional Test
Random Vibration 7.3 g, board level, 45 min/axis, 50 Hz to 2000 Hz Visual Check and Electrical Functional Test
Temperature Life 85° C, 2000 hours total, checkpoints at 168, 500, 1000, and 2000 hours Visual Check
Thermal Cycling -5° C to +70° C, 500 cycles Visual Check
Humidity 85% relative humidity, 55 °C, 1000 hours Visual Check
Notes:1. The above tests should be performed on a sample size of at least 12 assemblies from three lots of
material.2. Additional pass/fail criteria may be added at the discretion of the user.
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsAugust 2007 TDGOrder Number: 315345-003US 34
Thermal Solution Component Suppliers—Intel® Core™2 Duo processor
Appendix A Thermal Solution Component Suppliers
These vendors and devices are listed by Intel as a convenience to Intel’s general customer base. Intel does not make any representations or warranties whatsoever regarding quality, reliability, functionality, or compatibility of these devices. This list and/or these devices may be subject to change without notice.
Note: The enabled components may not be currently available from all suppliers. Contact the supplier directly to verify availability.
Table 5. Reference Heatsink
Part Part Number Contact Information
AdvancedTCA* passive heatsink assembly ECC-00177-01-GP
Cooler Master*Wendy [email protected](510)770-8566 ext 211
1U+ passive heatsink assembly ECC-00179-01-GP
cPCI passive heatsink assembly ECC-00178-01-GP
Thermal Interface Material PCM45F
Honeywell*Paula [email protected](858) 279-2956
Intel® Core™2 Duo processor—Mechanical Drawings
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsTDG August 200735 Order Number: 315345-003US
Appendix B Mechanical Drawings
The table below lists the mechanical drawings included in this appendix.
Table 6. Mechanical Drawings
Description Figure
AdvancedTCA* Reference Heatsink PCB Keep Out Zone Requirements (Sheet 1 of 2) Figure 19
AdvancedTCA* Reference Heatsink PCB Keep Out Zone Requirements (Sheet 2 of 2) Figure 20
AdvancedTCA* Reference Heatsink Assembly Figure 21
AdvancedTCA* Reference Heatsink Figure 22
CompactPCI* Reference Heatsink PCB Keep Out Zone Requirements (Sheet 1 of 2) Figure 23
CompactPCI* Reference Heatsink PCB Keep Out Zone Requirements (Sheet 2 of 2) Figure 24
CompactPCI* Reference Heatsink Assembly Figure 25
CompactPCI* Reference Heatsink Figure 26
1U Reference Heatsink PCB Keep Out Requirements (Sheet 1 of 2) Figure 27
1U Reference Heatsink PCB Keep Out Requirements (Sheet 2 of 2) Figure 28
1U Reference Heatsink Assembly Figure 29
1U Reference Heatsink Figure 30
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsAugust 2007 TDGOrder Number: 315345-003US 36
Mechanical Drawings—Intel® Core™2 Duo processor
Figure 19. AdvancedTCA* Reference Heatsink PCB Keep Out Zone Requirements (Sheet 1 of 2)
Intel® Core™2 Duo processor—Mechanical Drawings
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsTDG August 200737 Order Number: 315345-003US
Figure 20. AdvancedTCA* Reference Heatsink PCB Keep Out Zone Requirements (Sheet 2 of 2)
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsAugust 2007 TDGOrder Number: 315345-003US 38
Mechanical Drawings—Intel® Core™2 Duo processor
Figure 21. AdvancedTCA* Reference Heatsink Assembly
Intel® Core™2 Duo processor—Mechanical Drawings
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsTDG August 200739 Order Number: 315345-003US
Figure 22. AdvancedTCA* Reference Heatsink
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsAugust 2007 TDGOrder Number: 315345-003US 40
Mechanical Drawings—Intel® Core™2 Duo processor
Figure 23. CompactPCI* Reference Heatsink PCB Keep Out Zone Requirements (Sheet 1 of 2)
Intel® Core™2 Duo processor—Mechanical Drawings
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsTDG August 200741 Order Number: 315345-003US
Figure 24. CompactPCI* Reference Heatsink PCB Keep Out Zone Requirements (Sheet 2 of 2)
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsAugust 2007 TDGOrder Number: 315345-003US 42
Mechanical Drawings—Intel® Core™2 Duo processor
Figure 25. CompactPCI* Reference Heatsink Assembly
Intel® Core™2 Duo processor—Mechanical Drawings
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsTDG August 200743 Order Number: 315345-003US
Figure 26. CompactPCI* Reference Heatsink
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsAugust 2007 TDGOrder Number: 315345-003US 44
Mechanical Drawings—Intel® Core™2 Duo processor
Figure 27. 1U Reference Heatsink PCB Keep Out Requirements (Sheet 1 of 2)
Intel® Core™2 Duo processor—Mechanical Drawings
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsTDG August 200745 Order Number: 315345-003US
Figure 28. 1U Reference Heatsink PCB Keep Out Requirements (Sheet 2 of 2)
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsAugust 2007 TDGOrder Number: 315345-003US 46
Mechanical Drawings—Intel® Core™2 Duo processor
Figure 29. 1U Reference Heatsink Assembly
Intel® Core™2 Duo processor—Mechanical Drawings
Intel® Core™2 Duo processor on 65 nm process for Embedded ApplicationsTDG August 200747 Order Number: 315345-003US
Figure 30. 1U Reference Heatsink