intelibifuel controllers up to 70 % of your diesel consumption with gas reduce your operational...
TRANSCRIPT
InteliBifuel controllersTHE PRACTICAL DUAL FUEL CONTROL MANAGEMENT SOLUTION FOR DIESEL ENGINE APPLICATIONS
� Substitute up to 70 % of your diesel consumption with gas � Reduce your operational costs substantially
Fuel costs per year
0%
20%
40%
60%
80%
100%
100% 70%
30%
Before After
Fuel consumption at nominal output
Case study of CAT 3512B, 1500 kVA, 1500 RPM
$ 0
$ 300 000
$ 600 000
$ 900 000
$ 905 851
$ 38 430
$ 271 755
Before After
Diesel Gas
Substantial Fuel Savings & Operational costs
Extended Run Times without refueling
� Manufacturing & production factories � On shore/off shore drilling rigs and operations � Data centers � Shopping complexes � Municipal systems � Wastewater treatment � Financial institutions � Healthcare facilities � Other critical installations
Continuous operation Prime Power applications Standby power Peak shaving & Peak saving
Benefi ts
10 days extended run time without refueling due to
70% gas substitution rate
Normal run time
with standard
diesel tank
FUELFUEL
2 COMAP INTELIBIFUEL – THE PRACTICAL SOLUTION
Greener Energy
Other important benefits and features
� ComAp Bi-fuel is a more environmentally friendly solution for Diesel engines
� Emission reductions possible:• Reduction of CO2 – 5% to 20%• Reduction of NOx – 30% to 40%• Reduction of SOx – 70% to 100%• Reduction of Particulate emissions (PM) – up to 50%
� Together with the option of the fitment of a catalytic convertor, significant reduction of CO can also be expected (please enquire at [email protected]).
� Fuel flexibility � Maintenance savings – longer oil life and increased periods between required maintenance intervals � No de-rating of engine power output or performance – ideal for transient loads � Fully automatic and dynamic solution which will safely maximize the substituted gas � All engine parameters are kept within the limits specified by the engine manufacturer: • Engine boost air and exhaust temperatures measurement, monitoring/protection• Minimum & Maximum Gas pressure measurement, monitoring/protection• Comprehensive Knocking detection system – Frequency sensors fitted to every cylinder (InteliBifuel 20)• Diesel portion mapping and measurement• Actual Load measurement• Minimum Load gas protection
� Smooth transition between diesel and bi-fuel modes at any time � Non intrusive solution – no change of any engine parts required
� Gas/diesel ratio display � Full history files recording � Remote monitoring, control and configuration via PC or via the internet
COMAP INTELIBIFUEL – THE PRACTICAL SOLUTION 3
Solution
The Bi-fuel principle is based on adding gas to the engine (this can be also perceived as an addition of an alternative energy – e.g. the gas).
Generator engines are typically governed and therefore must maintain the same RPM at all times, when an alternative energy (the gas) is introduced to the governed engine there is simply less energy (or power) required to be delivered by the engine’s diesel governor. This allows InteliBifuel to control precisely the amount of gas being introduced to the engine and in doing so enable lower quantities of diesel to be used to provide the power. The diesel engine principal does not change – the engine is still dieseling and the diesel fuel is required to provide 30% of the engine power, parts lubrication, cooling and as an ignition source for the gas.
ComAp’s quality and fully automated InteliBifuel solution ensures that all key engine safety parameters are met at all times. Should any engine parameter move towards a maximum limit, the amount of gas will automatically decrease and adjust itself and should any of the engine manufacture’s parameters be exceeded for any reason, gas is immediately stopped and the engine continues to operate on 100% diesel without any interruption of the power supply. By this principle InteliBifuel achieves the highest possible gas/diesel ratio.
On the next page is an example of ComAp InteliBifuel system used in paralleling gensets application. However, InteliBifuel can be confi gured for various applications: pumps, frac trucks, heavy mining trucks, locomotives, ships, etc. Please contact [email protected] for more information.
How it works
Frequently asked questions
1. How much diesel can be replaced?Depending on the type of engine typical gas/diesel ratios after conversion are up to 70% gas/30% diesel. There are additional factors which can also affect gas/diesel ratios such as: engine condition, ambient weather conditions at the site, site load variability, and gas quality etc. 2. Is my engine suitable?Yes. Any 4 stroke diesel engine is generally suitable.3. Will Bi-fuel affect engine performance?No, the engine performance will remain the same as before the conversion. The engine can still operate up to full or maximum load at any time; it should be noted that the best gas/diesel ratios are normally achieved at around 80% of nominal engine power, which is usual for a continuous operation. When the engine needs to operate above 80% of nominal engine the ComAp InteliBifuel automatically decreases the amount of gas. Also the engine’s response to load steps and transient loads or changes will remain exactly the same as before the conversion.
4. Does ComAp InteliBifuel system interfere with the existing control system on my engine?
No, InteliBifuel does not interfere with the existing engine control system nor does it control the engine in any way or stop the engine at any time. InteliBifuel is mainly concerned with the precise control of the gas and protection of the engine when operating in Bi-fuel mode. Gas is only introduced to the engine once the engine has already started and is running on 100% diesel.5. What warranty or guarantee is provided
by ComAp?ComAp has a standard two year warranty for all ComAp products.6. What types of gases can be used?ComAp InteliBifuel will safely maximize the use of any available combustible gas, i.e. natural gas, well gas, bio gas, landfi ll gas, propane gas, coal gas, CNG, LNG. ComAp provides a free gas suitability feedback service where you can send any gas analysis to: [email protected]
4 COMAP INTELIBIFUEL – THE PRACTICAL SOLUTION
MAINS
LOAD
GEN-SET
GEN-SET
INTERNET
REMOTE CONTROL ROOM
GEN-SET
InteliBifuel CU
J1939
InteliBifuel CU
J1939
InteliBifuel CU
J1939
InteliBifuel
DENOX 20
InteliBifuel
DENOX 20
InteliBifuel
DENOX 20
InteliCompactNT MINT
InteliCompactNT MINT
InteliCompactNT MINT
MainsCompactNT
IL-NT GPRS
IL-NT GPRS
IL-NT GPRS
CAN2
IL-NT GPRS GAS THROTTLEVALVE
SHUTOFF VALVES
GAS THROTTLE
VALVE
SHUTOFF VALVES
GAS THROTTLE
VALVE
SHUTOFF VALVES
FLYWHEEL
CAMSHAFT
BOOST AIR
TEMPERATURE
SENSOR
EXHAUST TEMPERATURE
SENSOR
AIR FILTER
AIR
GAS
TURBO CHARGER
KNOCKING
SENSOR
EXHAUST
GAS TRAIN
GAS TRAIN
GAS TRAIN
GAS INLET
GAS INLET
GAS INLET
COMAP INTELIBIFUEL – THE PRACTICAL SOLUTION 5
Key Elements of the system
The InteliBifuel CU is the highly fl exible main control unit of the ComAp fully featured InteliBifuel solution. This sophisticated Bi-fuel (dual fuel) controller has outstanding monitoring, protection and control features including allocation for J1939 protocol and/or sensors that may be used in order to convert any type of diesel engine to Bifuel operation.
The InteliBifuel CU protects the engine during Bifuel operation by controlling the gas throttle valve and gas shut off safety solenoid valves, preventing the engine from exceeding any critical safety parameters.
This advanced controller is designed to communicate through both standard and proprietary CAN J1939 communication protocols to a wide range of EFI engines including: Caterpillar, Cummins, Detroit Diesel, Deutz, GM, Isuzu, Iveco, John Deere, MAN, MTU, Perkins, Scania, Sisu, Volvo Penta and others.
Benefi ts
� Integrated solution with hardwired safety functions � Full communication support of engines with ECU – access to information from ECU via Modbus
� Event driven History recording, easy backtracking and problem solving
� Slave panels available – economical solution for remote control
� Integrated clutch control – less wiring and components
� Many types of communication � Perfect price/performance ratio � Built-in PLC-integrated control of technology
Features
� 14 binary inputs, 14 binary outputs, 8 analog inputs � RS232/Modem/Modbus/Internet communication � Engine measurement from sensors or via J1939 � Input/output and J1939 confi guration � Bifuel running hour meter � Sealed membrane panel to IP65 � Operating temperature:• -20 to +70 °C regular unit• -40 to +70 °C low temperature unit
� 3 level password protection � InteliBifuel CU controller meets several forcing counter standards (EN, UL, CSA, NFPA)
Confi gurable PLC functions
� Logical functions: AND, OR, XOR, RS � Comparators with delay or with hysteresis � Analog switch from two inputs to one output � Mathematical functions:ADD, SUB, MAX, MIN, AVG
� Linear interpolation, moving average � PID loops with analog or binary outputs � Counters, Timers, Delay functions � History and protection forcing � Ramp Up/Down, Inc/Dec, Jump
Extension modules and remote display possibilities
� up to 1× I-AOUT8 (Analog Outputs Extension Module)
� up to 4× IGS-PTM (Input/Output Module) � up to 4× IS-AIN8 (Analogue Input Module) � up to 3× IS-BIN16/8 (Binary Input/Output Module) � up to 4× IGL-RA15 (Remote Annunciator) � up to 2× I-RD-CAN (Remote Display with CAN Bus Interface)
InteliBifuel CU
6 COMAP INTELIBIFUEL – THE PRACTICAL SOLUTION
Key Elements of the system
InteliBifuel DENOX 2 InteliBifuel DENOX 20
InteliBifuel DFM
� Anti knocking device � Field proven solution for knocking detection � Integration with InteliBifuel CU controller via Analog and Binary outputs
� Parameters for adjustment accessible via DenEdit software
� 2 monitoring channels � Each channel can be confi gured for single cylinder or for the monitoring of neighbouring cylinders
� Suitable for all inline engines up to a maximum of 6 cylinders
� Anti knocking device � Field proven solution for knocking detection � Integration with InteliBifuel CU controller via Analog and Binary outputs
� Parameters for adjustment accessible via DenEdit software
� Up to 20 monitoring channels � Each channel can be confi gured for single cylinder monitoring up to 20 cylinders
� Suitable for engine up 20 cylinders
� Dual-Fuel Module – interface unit for InteliBifuel CU controller with Speed governor and Diesel actuator
� Gas throttle valve servo control loop � Diesel consumption measurement via current loop
Package Order code
InteliBifuel 2InteliBifuel CUInteliBifuel DENOX 2 InteliBifuel DFMSoftware and documentation
IBF-2
InteliBifuel 20InteliBifuel CUInteliBifuel DENOX 20InteliBifuel DFMSoftware and documentation
IBF-20
Order codes
COMAP INTELIBIFUEL – THE PRACTICAL SOLUTION 7
References
Mexico | Simply Integrated Solution
� Ottomotores � Largest genset packager in Mexico � Ottomotores offers Bi-fuel range of gensets with ComAp InteliBiFuel as standard product
� Multiple projects carried out in 2012 with following engines: Perkins 2806, 2206; Cummins QSK60-G6, QST30-G4
Nigeria | Short Payback Period
� Dangote Pasta � Caterpillar 3512B 1200 kW gensets � Short payback period – less than 2 months
� Prime power operation � Natural gas
8 COMAP INTELIBIFUEL – THE PRACTICAL SOLUTION
Russia | Extreme Climatic Conditions
� Severo-Khosedayuskoe Energocentrum
� Cummins KTA50 gensets � Cummins QSK60 gensets � Prime power operation � Natural Gas � Extreme conditions
Romania | Oil & Gas Environment
� Eneria Romania � Caterpillar 3512B 1200 kW gensets � Remote location – oil platform, Black sea
� Prime power operation � Natural gas
COMAP INTELIBIFUEL – THE PRACTICAL SOLUTION 9
Examples of converted high speed engines
10 COMAP INTELIBIFUEL – THE PRACTICAL SOLUTION
Brand Type DG set Output
Caterpillar 3300 series 150 kW – 220 kW
Caterpillar 3400 series 200 kW – 650 kW
Caterpillar 3500 series 700 kW – 2000 kW
Caterpillar C15 series 500 kW
Caterpillar C18 series 400 kW – 500 kW
Caterpillar C27 series 800 kW
Cummins KTA series 400 kW – 1200 kW
Cummins QSK series 1100 kW – 1800 kW
Cummins QST series 650 kW – 800 kW
Cummins VTA series 500 kW – 600 kW
Deutz TBD series all outputs
MAN D2842LE201 400 kW
Mercedes OM444LA/12183TB83 440 kW
Mitsubishi SR6-PTA 440 kW – 600 kW
Mitsubishi S12R-PTA 1285 kW
MTU 18V2000 1000 kW
MTU 20V4000 2200 kW
Perkins 2206D-13TAG3 400 kW
Perkins 2306C E14 TAG1A 280 kW
Perkins 2506C E15TAG3 450 kW
Perkins 2806C-E18TAG3 600 kW
Perkins 2806A-E18TAG2 560 kW
Perkins 3012TAG2A 580 kW
Perkins 4006-23TAG3A 600 kW
Perkins 4012-46TAG2 1200 kW
SCANIA DC series 225 kW – 520 kW
Volvo TD series all outputs
About ComAp
COMAP INTELIBIFUEL – THE PRACTICAL SOLUTION 11
ComAp is a dynamic international company with a solid reputation for delivering innovative electronic solutions to the power generation, industrial engine and equipment markets. By providing customers with state-of-the-art products, ComAp has built a name for delivering excellent reliability and good value.
Excellent and reliable product solutions
ComAp specializes in creating electronic control and management solutions for use in the power generation industries and drive power markets. Our portfolio of products, software and accessories is designed to support emergency power, standby power generation and engine driven applications all over the world. We also work closely with our customers to develop unique customized and turn key solutions for ordinary and extraordinary applications delivering high standards of excellence on every project.
Professional partnerships
ComAp‘s extensive global distributor network means that our products are locally available in almost 100 countries, spanning every continent in the world. Through our professional and highly dedicated global distributor network we can satisfy customers’ needs, however challenging. People make the difference
ComAp‘s key strengths are fl exibility, experience, knowledge and enthusiasm. This blend of values defi nes our personality and gives you the assurance of a truly honest and positive relationship. By supporting our people, investing in their development and encouraging creativity, our teams work hard to fi nd new opportunities, technologies and solutions that enable us to successfully help our customers solve their problems effectively.
At ComAp, we believe passionately in the importance of continuously developing new technology along with forward thinking software and hardware to maintain the enviable position as worldwide leader in communication and control for power generation and drive power applications.
Customer satisfaction is our mission. We continuously develop our people to be the best to succeed in our mission.
© ComAp. Features and specifi cation are subject to change without prior notice. 2013-11/CPBECIBC
ComAp a.s.
Czech RepublicPhone: + 420 246 012 111 Fax: + 420 266 316 647E-mail: [email protected]: www.comap.cz
MANUFACTURER: LOCAL DISTRIBUTOR / PARTNER:
main red
PMS 1795CC0 M96 Y90 K2
YOUTUBE LOGO SPECS
PRINTgradient bottom
PMS 1815CC13 M96 Y81 K54
on dark backgroundson light backgrounds
standard
no gradients
watermark
stacked logo (for sharing only)
standard
no gradients
watermark
stacked logo (for sharing only)
white
WHITEC0 M0 Y0 K0
black
BLACKC100 M100 Y100 K100
ComAp create advanced control management systems for the power generation and drive power markets, achieving customer satisfaction through proven reliability and optimum fl exibility with simple and intuitive operation.