intellitrac product guide - tbc consoles...wire mesh cable tray standard, additional cable trays and...
TRANSCRIPT
IntelliTrac ® V3 PRODUCT GUIDEtbcconsoles.com 1.888.console [email protected]
rev. Nov 2020
[email protected] | PAGE 2
TABLE OF CONTENTS
TBC Consoles | 170 Rodeo Drive, Edgewood, NY 11717 | 1-888-CONSOLE
T SERIES .................................................................................................................................................................3
HD SERIES ..............................................................................................................................................................4
FITT SERIES ...........................................................................................................................................................5
CONSOLE MODULES & CABLING ...............................................................................................................................6
CONFIGURATIONS & TRANSITIONS ...........................................................................................................................7
CLEARANCES & ACCESSORIES .................................................................................................................................8
FINISHES ..................................................................................................................................................................9
rev. Nov 2020
[email protected] | PAGE 3
T Series
Base Frame Modules:Starter Bay Module, 19” wide (IT-SB)Running Bay Module, 19” wide (IT-RB)
The T Series has an expandable stantion structure designed to accommodate up to four depths (A, B, C, and D) to meet each client’s specific technical, spatial, and operational requirements. Typical equipment will fit in our standard A, B, or C. D depth – or base cabinet extension modules – can be used where required. All four depths can accommodate up to 7 RU of rack rail for equipment.
For each of the three depths the basic ‘building blocks’ of the lntelliTrac console system are the Starting Bays and the Running Bays. The T Series comes in only 19” wide bay modules. These modules include: feet (as required), wire mesh cable tray, front and rear device Tracs for monitor and accessory mounting, vented and removable ABS lower cabinet doors (front & rear). Additional accessories sold separately.
lntelliTrac T Series is priced and designed ‘per bay’, but is manufactured according to final length (ex. 4-bay console). This is done to ensure smooth function and appearance of the extruded aluminum device tracks.
Interchangeable, drop-in turrets or other modules to
be utilized as needed
Easily removable Black HDPE doors standard, optional keyed
locks or steel doors are available
Long support foot with levelers typically used on
console ends only Leveler feet used on runs longer than 4-bays and at angular transitions
Console stanchions spaced 19 1/8” [488.9mm] apart for mounting optional 7RU rack rail
Wire mesh cable tray standard, additional cable trays and wire management available
Front and Rear equipment Trac
A DEPTH B DEPTH C DEPTH
42 3/4" [1086mm] 46 3/4" [1188mm]
28 3
/4" [
730m
m]
38 3/4" [984mm]
33 9
/16"
[853
mm
]
28 3
/4" [
730m
m]
28 3
/4" [
730m
m]
33 3
/4" [
856m
m]
33 3
/4" [
856m
m]
rev. Nov 2020
[email protected] | PAGE 4
HD Series
Base Frame Modules:Starter Bay Module, 19” wide (IT-HD-SB)Starter Bay Module, 25” wide (IT-HD-W-SB)Running Bay Module, 19” wide {IT-HD-RB) Running Bay Module, 25” wide (IT-HD-W-RB)
The HD Series was created to provide additional equipment capacity in the lower cabinet area than in the T Series. The HD Series comes in an A, B, or C depth to best meet each client’s specific mix of technical, spatial, and operational requirements. All depths can accommodate up to 9 RU of equipment in the base cabinet.
For all three depths the basic ‘building blocks’ of the lntelliTrac console system are the Starting Bays and the Running Bays. The HD Series comes in both 19” and 25” wide bay modules. These modules include: feet (as required), wire mesh cable tray, front and rear device Tracs for monitor and accessory mounting, vented and removable ABS lower cabinet doors (front & rear). Additional accessories sold separately.
lntelliTrac HD Series is priced and designed ‘per bay’, but is manufactured according to final length (ex. 4-bay console). This is done to ensure smooth function and appearance of the extruded aluminum device tracks.
Front and Rear equipment Trac
Easily removable Black HDPE doors standard, optional keyed locks or steel doors are available
Console stanchions can be spaced at 25” [635mm] or 19 1/8” [489mm] apart for mounting optional 9 RU rack rail
Vented metal CPU pullout shelf for 25”
wide bays
46 3/16" [1174mm]
28 3
/4" [
730m
m]
33 9
/16"
[853
mm
]
50 3/16" [1275mm]
28 3
/4" [
730m
m]
33 5
/8" [
854m
m]
42 3/16" [1072mm]
28 3
/4" [
730m
m]
33 1
1/16
" [85
6mm
]
A DEPTH B DEPTH C DEPTH
Interchangeable, drop-in turrets or other modules to
be utilized as needed
Long support foot with levelers typically used on
console ends only
Wire mesh cable tray standard, additional cable trays and wire management available
Leveler feet used on runs longer than 4-bays and at angular transitions
rev. Nov 2020
[email protected] | PAGE 5
FITT Series
Base Frame Modules:Starter Bay Module,19” wide (FIT-SB) Running Bay Module, 19” wide (FIT-RB)
The FiTT Series is designed as an IntelliTrac console without the need for robust storage space under the countertop. The FiTT utilizes a smaller footprint than the other IntelliTrac consoles and custom turrets that incorporate brush grommets when it is necessary to cover the front trac.
The FiTT series simplifies our IntelliTrac offering with an above the floor design and minimal rack-mounted equipment. FiTT is designed to utilize a custom turret which can optionally cover the front trac when it is not needed or when the operator needs better reach to their equipment. Robust cable management is available up through the floor with access panels available for access.
Note that the FiTT console can be designed in two different depths and is priced and designed “per bay” as with the rest of the line.
FITT 2RU SECTION FITT 3RU SECTION 2RU SWITCHER SECTION
Easily removable vented front and rear Black HDPE doors with optional keyed locks available
Front and Rear equipment Trac(front access optional utilizing customized turret)
Parting strip for independent power/data cable routing from core to floor
Interchangeable, drop-in equipment turret modules with brush strip
Console stanchions spaced 19 1/8” [488.9mm] apart for
2RU rack rail mounting
Vented bottom panel with recessed channel for
integrated cable parting strip
Powder coated foot with leveler
Leg with interior cable management
Frame shown in Silver, also available in Black for orders of 6 or more consoles.
Removable access panel
28 3
/4" [
730m
m]
32 1
/4" [
819m
m]
28 3
/4" [
730m
m]
33 9
/16"
[852
mm
]
33 9
/16"
[852
mm
]
29 1
/16"
[738
mm
]
39" [991mm]39" [991mm] 39 3/4" [1010mm]
rev. Nov 2020
[email protected] | PAGE 6
Power and Wire Management
IT-UM-SSUpper sliding shelf module with grommet, black laminate finish
FITT with internal parting strip for independent cable and data routing
IT-UM-2Single level upper rack module, black laminate finish; 2RU
IT-UM-8Single level upper rack module, black laminate finish; 8RU
IT-LSLower shelf unit with grommets, black laminate finish
IT-UM-BlBi-level upper rack module, black laminate finish
IT-PO-SHELFRack mount pullout shelf, vented 16.S”W x 18”d 419mm x 457mm
IT-BTMBottom closure panel / light-duty shelf, vented, drop-in.
CTR-SWR-TSwitcher Wedge with rack turrets built in, various configurations available.
CTR-SWRSwitcher wedge with optional brackets for aux panel, size will depend on equipment.
Optional Cable Collar mounted in each bay for raised floor cabling Shown with power, fiber optic, and wire mesh cable trays
Note: The turrets/modules are available in a wider variety of sizes than samples shown below
Upper and Lower Modules
rev. Nov 2020
[email protected] | PAGE 7
Angular Transitions
Working with the stock angular transitions shown below*, lntelliTrac consoles can be configured in a ‘cockpit’ style, to create ergonomically efficient layouts for single or multiple-operators.
Notes:The configurations shown here are just a sampling of console lengths, typical to control room applications, that can be created with the lntelliTrac system. IT, HD, and FITT Series consoles can be created in these same configurations including any of the various depths available.
T-Series
HD-Series
FITT-Series
Configurations and Transitions
Custom Options
’Reverse-angle’ transitions are available in 5, 10, and 15° versions.
2B-5T2 Bay B-Depth with (5) 4RU Turrets
4B-4T4 Bay B-Depth with (4) 4RU Turrets
2B-5T2 Bay B-Depth with (5) 4RU Turrets
4B-4T4 Bay B-Depth with (4) 4RU Turrets
9B-9T9 Bay C-Depth with (9) 2RU Turrets
9B-5T9 Bay B-Depth with (5) 4RU Turrets and 4 Shelves
4B-4T4 Bay with (4) 4RU Turrets
8B-8T8 Bay with (8) 4RU Turrets
rev. Nov 2020
[email protected] | PAGE 8
14 3/8"
17 3/8"18 1/16"
16 3/4"
17 1
/2"
20 1
/2"
17 1
/2"
20 1
/2"
17 1
/8"
12 1
/4"
17 1
/8"
18 13/16"13 11/16"
15 3/4"
14 3/4"
13 3/4"
12 11/16"15 3/4"
18 3/4"
19 1/16"
17 3/8"
7 5/
8"
11 7
/8"
3 1/
2"
12 1
/4"
T-Series B Depth HD-Series B Depth FITT-Series
Equipment Clearances
2RU 3RU 4RU
T-Series
A
B
C
D
14.56”
16.06”
19.5”
22.94”
17.13”
17”
20.25”
23.69”
16.19”
15.75”
21”
24.44”
Clearance
12”
13.69”
14.5”
21.69”
4RU 6RU 8RU
16.19”
24.5”
---”
13.06”
24.13”
---”
12.94”
24.13”
---”
Clearance
13.81”
20.05”
---”
Depth
HD-Series
A
B
C
D
2RU 3RU 4RU
17” 18.06” 19.25”
Clearance
14.375”
FITT
Note: Maximum Rack Unit clearance shown for each turret. Dimensions change depending on positioning, power, and/or cable management options. Extended and Custom Turret options available. For a more comprehensive look, visit our intelliTrac web page.
Accessories
Extension ModuleFront Trac Mounted PDU Plexiglas PartitionsRear Trac Mounted LCD Arms
Additional Accessories are available on our website
23.69” 20.56” 20.44” 18.81”
rev. Nov 2020
[email protected] | PAGE 9
FSC NAUF
For more information about our consoles, including CAD & Revit models, please visit tbcconsoles.com. You may also contact one of our Account Managers for a free design review by emailing [email protected].
Time Base Corporation d/b/a TBC Consoles170 Rodeo Dr. | Edgewood, NY 11717
P : +1 888.CONSOLE | F : +1 631.293.4075M A D E
I N A M E R I C A