interlok ii grating - lysaght · interlok ii ® 2 lysaght interlok® ii lysaght interlok® ii steel...
TRANSCRIPT
INTERLOK® II GRATINGDESIGN AND INSTALLATION GUIDE
INTER
LOK
II ®2
LYSAGHT INTERLOK® IILYSAGHT INTERLOK® II steel grating combines the strength and light weight of steel with the corrosion protection of galvanizing to provide a long-life, slip resistant deck.
SIMPLY LOCKS TOGETHER
The rollformed continuous legs allow INTERLOK® II planks to be positively located along their full length on assembly. Welding is not necessary, however crimping of the mating legs is desirable over long spans or in unusual conditions such as cyclonic areas or where vibration may occur. Crimping is a simple operation with the INTERLOK® II Crimping Tool. Should bolting become necessary, this too is easy using INTERLOK® II J Bolts.
INTERLOK® II grating is available in two profiles, two thicknesses and two surfaces, and is nominally 225mm wide.
The MF (male/female) profile is used for most applications, as the male and female legs are designed to inter-lock adjacent lengths of grating. The DM (double male) profile is used for stair treads and as a closer to provide a neat finished edge to an INTERLOK® II platform or walkway.
INTERLOK® II Regular has a surface of stiffened transverse ribs and is ideally suited for general access and any non-hazardous application where the decking cannot become slippery due to oil, water, etc. This includes such applications as mezzanine floors, shelving in high density storage systems and interior walkways and platforms.
INTERLOK® II Anti-skid has teeth formed in the transverse ribs in a special pattern which provides extra grip in all directions. These teeth ensure added safety when oil, grease, water, sap, mud, etc may make the grating slippery. Tests with a number of shoe sole materials have shown that INTERLOK® II Anti-skid provides excellent grip in most hazardous conditions.
The surface of INTERLOK® II grating is self draining and, because of the size of the slot, easily cleaned of mud, dirt or grease. This slot also allows the free passage of water, air and light. In addition, where circulation of air or other ventilation is necessary, INTERLOK® II grating is the ideal material.
INTERLOK® II grating meets the requirements of AS 1657, ‘Fixed Platforms, Walkways, Stairways and Ladders’.
INTERLOK RAMPS
LYSAGHT INTERLOK® II is also suitable for use on sloped walkways or ramps constructed in accordance with AS 1657.
Not only is INTERLOK® II grating easy to assemble, its light weight also makes it easy to handle on site. Stock lengths of six metres are readily carried and placed by one man. When necessary, INTERLOK® II can also be simply dismantled and reassembled.
Ramps up to 7° slope may be decked with INTERLOK® II Regular.
INTERLOK® II Anti-skid may be used where cleated ramps are normally required, i.e. up to 20° slope. However, to ensure adequate grip across full width of such ramps, the grating must be laid transverse to the direction of travel.
MATERIAL SPECIFICATIONS
INTERLOK® II is made from zincformI steel conforming to AS 1397 - Zinc-coated and Aluminium/Zinc-coated Steel Sheet, Grade G300–Z450 (300 MPa minimum yield stress).
Note: All accessories have a coating mass of Z275. Where used in extremely aggressive environments, a thicker coating mass should be considered (subject to enquiry).
LENGTH AVAILABILITY
5309 6073 6837 7601 8265 9129 9893 10657 11421
5462 6226 6990 7754 8518 9282 10046 10810 11574
5615 6379 7143 7907 8671 9435 10199 10963 11727
5768 6532 7296 8060 8824 9588 10352 11116 11880
5921 6685 7449 8213 8977 9741 10505 11269 12033
Note: Length highlighted in bold is stock length.
MASSES
Mass Unit Area A1 A2 B1 B2
t (mm) kg/m kg/mI mm mm mm mm
G06512 1.2 3.8 16.9 63 65 15 20
G06520 2.0 6.3 27.8 64 66 16 21
224
10
14
3
17 approx.
Raised Teeth Interlok Antiskid
16 approx.
22 approx.
13 approx.
38.2
190
A1
A1
A2
B2B1
B1
MF Section
Alternate leg dimensions for DM section
10
INTE
RLO
K II
®3
INTERLOK® II IN MODULAR STORAGE SYSTEMSLYSAGHT INTERLOK® II Regular is the ideal alternative to timber decking in modular rack storage systems.
Designed to safely support heavy loads economically, INTERLOK® II grating, supplied custom-cut to size, fits into support members accurately and easily – usually without the need for special tools or hardware.
The slots in INTERLOK® II grating provide 29% open area to allow the passage of air, water, gases and light through the storage system, making it suitable for use in cold stores, stores where special atmospheres are used, as well as general stores.
If there is a need to increase the open area of the shelving system, INTERLOK® II DM sections can be used with an appropriate space left between them.
In short, an INTERLOK® II modular storage system has the following advantages:
• Maximum durability
• Minimal maintenance
• Non-combustible
• It cannot chip or splinter
• It is lightweight, easy to handle, and economical to transport
• It permits efficient ventilation
• It allows water from sprinkler systems to flow through
• It remains stable under changes in climate
INTER
LOK
II ®4
INTERLOK® II STAIR TREADS
INTERLOK® II Stair Treads offer all the advantages of INTERLOK® II grating including quick and easy installation. They are ideal for use in new installations, or as replacements when rebuilding. The Anti-skid grating provides a slip-resistant surface, even when wet or oily.
INTERLOK® II Stair Treads are strong, durable, corrosion-resistant, virtually self-cleaning and maintenance free.
Stair Treads are fabricated from INTERLOK® II Anti-skid grating with carrier plates and, where applicable, floor plate nosings which have been galvanized before assembly. Coating damage around the welds is cleaned and the area retouched with a zinc-rich paint. If required, stair treads not dipped galvanized after fabrication are available on special order. Stair treads made from INTERLOK® II Regular are also available on special order.
Stair Tread No. Actual Length
GT060H* 610
GT075H 765
GT090H 915
GT120H 1220
GT060EH** 610
GT075EH 765
GT090EH 915
GT120EH 1220
Notes: * Heavy Duty ** Extra Heavy Duty
HEAVY DUTY*
Made from G06520 grating with welded 3.0mm carrier plates.
*Check with regulatory authority for the use of the Heavy Duty stair tread.
EXTRA HEAVY DUTY
Made from G06520 grating with welded 3.0mm carrier plates and floor plate nosing.
224 262
115 180
40 40
32 326463 14 14
28 22
14 dia. 14 dia.
INTE
RLO
K II
®5
INSTALLATION & SPECIFICATIONSINSTALLATION
INTERLOK® II grating installations should be planned so as to use long lengths over multiple spans wherever possible. With multiple span installations, deflection is lower than simple spans for the same applied load and installation is quicker. End joints may be staggered to give a smoother overall surface. A combination of MF and DM sections should be used to ensure that the outside leg of all areas is a male leg.
To prevent relative movement between INTERLOK® II sections under load, and to make them work together as a continuous platform, 1.2mm thick INTERLOK® II should be crimped at mid span for spans in excess of 1500mm, and 2.0mm thick crimped at spans in excess of 1800mm. On longer spans, additional crimping may be desirable.
Crimping is quick and easy with the INTERLOK® II Crimping Tool. This tool is simply placed through the slots in the grating from above, clamped around the legs and operated to crimp the return lips on the leg sections together. The INTERLOK® II Crimping Tool is available from BlueScope Lysaght Distributors.
INTERLOK® II grating is readily cut on site with a hacksaw or power saw. When obstructions such as pipes, cable ducts, etc. are encountered, the grating is normally laid up to the obstruction and cut around as required. Adjacent lengths of INTERLOK® II grating should be joined together around cut-outs so as to ensure adequate distribution of the applied loads.
For internal applications, it is not always necessary to attach INTERLOK® II grating to the support structure. However, in installations where wind or vibration must be considered, the grating should be adequately fixed to the supports using the INTERLOK® II J Bolt or Hold Down Clip.
IMPORTANT NOTE
When using INTERLOK® II in a rural flooring application or where temperature variations are high, it is recommended that allowance be made for expansion. This would involve a 100mm gap left for every 20 sheet widths of flooring. It is also recommended that in rural flooring the floor be thoroughly hosed down about three times a week to prevent accumulation of waste matter in the side laps.
COMPATIBILITY
INTERLOK® II grating should be installed on gavlanized or painted supports. If INTERLOK® II is welded, the coating damage around the welds should be cleaned and retouched with zinc-rich paint.
PERFORMANCE
INTERLOK® II sections are accurately rollformed to close dimensional tolerances and the load capacities have been established by testing. Sections chosen using data contained herein will perform as specified when the design and installation are carried out in accordance with the recommendations set out in this publication and with accepted building practice.
AVAILABILITY
LYSAGHT INTERLOK® II grating is available through a network of LYSAGHT Distributors. Visit www.lysaght.com for the location of your local distributor.
DM section installed MF section installed to provide male leg at edge.
DM section closer provides male leg at edge.
INTER
LOK
II ®6
PACKING
INTERLOK® II grating is normally supplied in strapped bundles of 20 lengths.
HANDLING AND STORAGE
Bundles of INTERLOK® II should not be allowed to get wet. If not required for immediate use, the bundles should be stacked clear of the ground and, if left in the open, protected by waterproof covers. Moisture trapped beneath panels may cause unsightly water staining and detract from the finished appearance.
Care must be taken when handling long length bundles. When lifting, a suitable beam should be used. The beam should have several lifting points and carefully located slings.
For personal safety, sections should only be handled using clean, dry gloves.
LENGTHS
Stock length is 6 metres (6073mm). However, custom-cut lengths from 0.5 m to 12 m are available on order, with lead times subject to production schedules.
As INTERLOK® II is cut at every fourth rib, actually lengths must be multiples of 152.8mm.
The minimum custom-cut length is 5309mm and maximum is 12033mm (see table).
Lengths required less than 5309mm can be supplied on a cut back basis and will incur a cutting charge per length. Cut back lengths are in slot spacing increments of 38.2mm.
TOLERANCES
The following tolerances apply to LYSAGHT INTERLOK® II sections:
Depth: ±1mm
Width: +0-2mm
Length: (less than 3 m) +0-4mm (over 3 m) +0-6mm
ADVERSE CONDITIONS
If this product is intended to be used in marine, severe industrial, or unusually corrosive environments, ask for advice from our technical information line: 1800 641 417.
INTE
RLO
K II
®7
ACCESSORIES
Heel Toe Side Plates
Part Number: G1705
Description: (Thickness x Width x Length) 1.20 x 170 x 3600
Heel Toe End Plates
Part Number: G170E
Description: (Thickness x Width x Length) 1.20 x 170 x 3600
Filler Panel 75mm
Part Number: G065FP
Description: (Thickness x Width x Length) 1.20 x 65 x 3600
Carrier Plate
Part Number: G065CP
Description: (Thickness x Width x Length) For 224mm stair treads. 14mm round hole. 40 x 14mm slotted hole, use M12 bolts
End Plates
Part Number: G065EP
Description: (Thickness x Width x Length) 3.00mm 14mm holes for joining ends of 224 wide panels
Splice Plates
Part Number: G065SP
Description: (Thickness x Width x Length) 3.00 x 56 x 560 with 12mm holes for splicing panels end to end
Hold Down Clip
Part Number: G065HDC
Description: Attachment for fastening to supporting members through topside of grating (65mm deep grating only)
Heel Toe End Plate Bracket
Part Number: G065EB
Description: (Thickness x Width x Length) 2.00 x 56 x 80 x 80 12mm holes for attaching heel/toe end plates to ends of grating
J Bolt Nut Lockwasher
Part Number: G000JB
Description: M8 x 50 for fastening panels to supporting members from underside of grating
Hex. Head Bolt Nut & Lock Washer
Part Number: G006HB, G010HB, G012HB
Description: M6 x 20, M10 x 25, M12 x 25
Crimping Tool
Part Number: GCT Description: Crimping Tool
INTER
LOK
II ®8
ACCESSORY ASSEMBLY AND ORDERING DETAILSASSEMBLY OF ACCESSORIES
HEEL TOE SIDE PLATE
Drill 12mm diameter hole in side plate and attach using M10 bolts at 1200mm centres. Use G1705 with G06512 and G06520.
HEEL TOE END PLATE
Drill 12mm diameter hole in end plate and grating and attach at 2300mm centres using end plate bracket and M10 bolts.
SPLICE PLATE
Pre-drill 14mm diameter holes through webs of grating section. Interlock the sections and fit splice plate. Connect using M12 bolts.
CARRIER PLATE
Cut G06520 section to length and fit carrier plates each end. Weld each carrier plate with four welds 15mm long, or fix with two 4.8mm diameter rivets each end of each carrier plate.
In the case of welding, repair damaged zinc coating with a suitable zinc-rich paint.
ORDERING DETAILS
When ordering INTERLOK® II, please ensure that the correct product codes are used as shown in the following examples:
1) G06512RDM where R indicates Regular and DM indicates Double Male
2) G06512RMF where R indicates Regular and MF indicates Male/Female
3) G06512ADM where A indicates Anti-skid and DM indicates Double Male
4) G06512AMF where A indicates Anti-skid and MF indicates Male/Female
End Plate
Hold Down Clip
Splice Plate
Filler Panels
Carrier Plate
Heel Toe Side Plate Heel Toe End Plate
J Bolt
INTERLOK® II
INTERLOK® II
Structural Support
Structural Support
Hold down clip
Hold down clip
Side Plate
End Plate Bracket
End Plate
J-Bolt
For joining end to end
For joining end to end
For making stair treads other than stock lengths
Filler Panels
Welds as specified
SECTION A
INTE
RLO
K II
®9
ALLOWABLE LOAD TABLES
Notes:
1. Allowable loads were determined by tests.
2. Ws = Safe Working Load Defln = Deflection produced by Ws WD = Working load based on deflection of span/360
3. Span is measured from the centre of the supports. Minimum recommended support width is 50mm.
4. For intermediate spans, loads and deflections may be obtained by linear interpretations.
G06512 G06520
Span Uniform Load Line Load Point Load Uniform Load Line Load Point Load
Ws DFLN WD Ws DFLN WD Ws DFLN WD Ws DFLN WD Ws DFLN WD Ws DFLN WD
mm kPa mm kPa kPa mm kPa kPa mm kPa kPa mm kPa kPa mm kPa kPa mm kPa
600 78.57 3.06 36.13 5.28 2.90 3.03 0.82 1.70 - 141.22 4.20 55.70 9.49 3.40 4.68 1.68 2.10 -
700 59.96 4.00 29.07 4.67 3.20 2.85 0.82 1.80 - 108.11 4.70 45.20 8.48 3.70 4.43 1.68 2.30 -
800 47.00 4.40 23.71 4.21 3.50 2.66 0.82 1.90 - 86.10 5.20 37.00 7.71 4.10 4.12 1.68 2.50 -
900 38.24 4.90 19.62 3.86 3.90 2.47 0.82 2.00 - 70.67 5.80 30.74 7.12 4.60 3.87 1.68 2.70 -
1000 31.88 5.40 16.47 3.57 4.30 2.31 0.82 2.20 - 59.37 6.40 25.87 6.65 5.10 3.62 1.68 3.00 -
1100 26.06 5.90 13.44 3.21 4.70 2.08 0.82 2.20 - 48.44 7.00 21.12 5.97 5.60 3.25 1.68 3.30 -
1200 21.65 6.50 11.17 2.91 5.20 1.88 0.82 2.40 - 40.18 7.60 17.56 5.40 6.10 2.95 1.68 3.50 1.60
1300 18.24 7.00 9.43 2.66 5.60 1.72 0.82 2.40 - 33.79 8.20 14.83 4.92 6.60 2.70 1.68 3.90 1.56
1400 15.55 7.50 8.06 2.44 6.00 1.58 0.82 2.40 - 28.74 8.80 12.69 4.51 7.10 2.49 1.68 4.20 1.56
1500 13.39 8.00 6.98 2.25 6.40 1.45 0.82 3.20 - 24.70 9.40 10.95 4.15 7.50 2.31 1.68 4.60 1.52
1600 11.73 8.90 5.85 2.10 7.10 1.31 0.82 3.50 - 21.65 10.50 9.14 3.88 8.40 2.05 1.68 5.00 1.49
1700 10.36 9.90 4.96 1.97 7.90 1.18 0.82 3.80 - 19.13 11.70 7.70 3.64 9.40 1.83 1.68 5.50 1.44
1800 9.21 10.80 4.25 1.86 8.70 1.07 0.82 4.20 - 17.01 13.00 6.55 3.43 10.40 1.65 1.68 5.90 1.42
1900 8.24 11.80 3.67 1.75 9.50 0.98 0.82 4.60 - 15.23 14.30 5.63 3.24 11.40 1.50 1.68 6.50 1.36
2000 7.41 12.90 3.20 1.66 10.30 0.90 0.82 5.10 - 13.71 15.60 4.87 3.07 12.50 1.36 1.68 7.10 1.31
2200 6.14 15.60 2.40 1.51 12.50 0.74 0.77 6.40 0.74 10.97 18.00 3.73 2.70 14.40 1.15 1.60 8.50 1.15
2400 5.17 18.60 1.85 1.39 14.90 0.62 0.72 7.70 0.62 8.91 20.30 2.93 2.40 16.20 0.98 1.50 10.10 0.98
2600 4.42 21.90 1.46 1.29 17.50 0.53 0.68 9.20 0.53 7.33 22.60 2.35 2.14 18.10 0.85 1.42 12.00 0.85
2800 3.82 25.50 1.17 1.20 20.40 0.46 0.65 11.10 0.46 6.10 24.80 1.91 1.91 19.90 0.75 1.34 14.00 0.75
3000 3.33 29.30 0.95 1.12 23.40 0.40 0.62 19.90 0.40 5.12 27.00 1.58 1.72 21.60 0.66 1.28 16.10 0.66
3200 2.93 33.30 0.78 1.05 26.70 0.35 0.59 15.00 0.35 4.26 29.00 1.30 1.53 23.20 0.58 1.19 18.00 0.58
3400 2.60 37.60 0.65 0.99 30.10 0.31 0.56 17.00 0.31 3.55 30.90 1.09 1.35 24.70 0.52 1.13 20.10 0.52
3600 2.31 42.20 0.55 0.93 33.80 0.28 0.54 19.60 0.28 2.98 32.50 0.92 1.20 26.00 0.46 1.06 23.00 0.46
3800 2.08 47.00 0.47 0.88 37.60 0.25 0.52 22.20 0.25 2.50 33.90 0.78 1.06 27.10 0.41 1.00 25.60 0.41
4000 1.88 52.10 0.40 0.84 41.70 0.22 0.50 24.80 0.22 2.10 34.90 0.67 0.94 28.00 0.37 0.94 28.00 0.37
WS DFLN WD WS DFLN WD WS DFLN WD WS DFLN WD WS DFLN WD WS DFLN W
kPa mm kPa kN mm kN kN mm kN kPa mm kPa kN mm kN kN mm kN
600.00 78.57 3.60 36.13 5.28 2.90 3.03 0.82 1.70 - 141.22 4.20 55.70 9.49 3.40 4.68 1.68 2.10 -
700.00 59.96 4.00 29.07 4.67 3.20 2.85 0.82 1.80 - 108.11 4.70 45.20 8.48 3.70 4.43 1.68 2.30 -
800.00 47.00 4.40 23.71 4.21 3.50 2.66 0.82 1.90 - 86.10 5.20 37.00 7.71 4.10 4.12 1.68 2.50 -
900.00 38.24 4.90 19.62 3.86 3.90 2.47 0.82 2.00 - 70.67 5.80 30.74 7.12 4.60 3.87 1.68 2.70 -
1000.00 31.88 5.40 16.47 3.57 4.30 2.31 0.82 2.20 - 59.37 6.40 25.87 6.65 5.10 3.62 1.68 3.00 -
1100.00 26.06 5.90 13.44 3.21 4.70 2.08 0.82 2.20 - 48.44 7.00 21.12 5.97 5.60 3.25 1.68 3.30 -
1200.00 21.65 6.50 11.17 2.91 5.20 1.88 0.82 2.40 - 40.18 7.60 17.56 5.40 6.10 2.95 1.68 3.50 1.60
1300.00 18.24 7.00 9.43 2.66 5.60 1.72 0.82 2.40 - 33.79 8.20 14.83 4.92 6.60 2.70 1.68 3.90 1.56
1400.00 15.55 7.50 8.06 2.44 6.00 1.58 0.82 2.40 - 28.74 8.80 12.69 4.51 7.10 2.49 1.68 4.20 1.56
1500.00 13.39 8.00 6.98 2.25 6.40 1.45 0.82 3.20 - 24.70 9.40 10.98 4.15 7.50 2.31 1.68 4.60 1.52
1600.00 11.73 8.90 5.85 2.10 7.10 1.31 0.82 3.50 - 21.65 10.50 9.14 3.88 8.40 2.05 1.68 5.00 1.49
1700.00 10.36 9.90 4.96 1.97 7.90 1.18 0.82 3.80 - 19.13 11.70 7.70 3.64 9.40 1.83 1.68 5.50 1.44
1800.00 9.21 10.80 4.25 1.86 8.70 1.07 0.82 4.20 - 17.01 13.00 6.55 3.43 10.40 1.65 1.68 5.90 1.42
1900.00 8.24 11.80 3.67 1.75 9.50 0.98 0.82 4.60 - 15.23 14.30 5.63 3.24 11.40 1.50 1.68 6.50 1.36
2000.00 7.41 12.90 3.20 1.66 10.30 0.90 0.82 5.10 - 13.71 15.60 4.87 3.07 12.50 1.36 1.68 7.10 1.31
2200.00 6.14 15.60 2.40 1.51 12.50 0.74 0.77 6.40 0.74 10.97 18.00 3.73 2.70 14.40 1.15 1.60 8.50 1.15
2400.00 5.17 18.60 1.85 1.39 14.90 0.62 0.72 7.70 0.62 8.91 20.30 2.93 2.40 16.20 0.98 1.50 10.10 0.98
2600.00 4.42 21.90 1.46 1.29 17.50 0.53 0.68 9.20 0.53 7.33 22.60 2.35 2.14 18.10 0.85 1.42 12.00 0.85
2800.00 3.82 25.50 1.17 1.20 20.40 0.46 0.65 11.10 0.46 6.10 24.80 1.91 1.91 19.90 0.75 1.34 14.00 0.75
3000.00 3.33 29.30 0.95 1.12 23.40 0.40 0.62 12.90 0.40 5.12 27.00 1.58 1.72 21.60 0.66 1.28 16.10 0.66
3200.00 2.93 33.30 0.78 1.05 26.70 0.35 0.59 15.00 0.35 4.26 29.00 1.30 1.53 23.20 0.58 1.19 18.00 0.58
3400.00 2.60 37.60 0.65 0.99 30.10 0.31 0.56 17.00 0.31 3.55 30.90 1.09 1.35 24.70 0.52 1.13 20.10 0.52
3600.00 2.31 42.20 0.55 0.93 33.80 0.28 0.54 19.60 0.28 2.98 32.50 0.92 1.20 26.00 0.46 1.06 23.00 0.46
3800.00 2.08 47.00 0.47 0.88 37.60 0.25 0.52 22.20 0.25 2.50 33.90 0.78 1.06 27.10 0.41 1.00 25.60 0.41
4000.00 1.88 52.10 0.40 0.84 41.70 0.22 0.50 24.80 0.22 2.10 34.90 0.67 0.94 28.00 0.37 0.94 28.00 0.37
Uniform Load Line Load Point Load
G06520G06512
Uniform Load Line Load Point Load
Span (mm) WS DFLN WD WS DFLN WD WS DFLN WD WS DFLN WD WS DFLN WD WS DFLN W
kPa mm kPa kN mm kN kN mm kN kPa mm kPa kN mm kN kN mm kN
600.00 78.57 3.60 36.13 5.28 2.90 3.03 0.82 1.70 - 141.22 4.20 55.70 9.49 3.40 4.68 1.68 2.10 -
700.00 59.96 4.00 29.07 4.67 3.20 2.85 0.82 1.80 - 108.11 4.70 45.20 8.48 3.70 4.43 1.68 2.30 -
800.00 47.00 4.40 23.71 4.21 3.50 2.66 0.82 1.90 - 86.10 5.20 37.00 7.71 4.10 4.12 1.68 2.50 -
900.00 38.24 4.90 19.62 3.86 3.90 2.47 0.82 2.00 - 70.67 5.80 30.74 7.12 4.60 3.87 1.68 2.70 -
1000.00 31.88 5.40 16.47 3.57 4.30 2.31 0.82 2.20 - 59.37 6.40 25.87 6.65 5.10 3.62 1.68 3.00 -
1100.00 26.06 5.90 13.44 3.21 4.70 2.08 0.82 2.20 - 48.44 7.00 21.12 5.97 5.60 3.25 1.68 3.30 -
1200.00 21.65 6.50 11.17 2.91 5.20 1.88 0.82 2.40 - 40.18 7.60 17.56 5.40 6.10 2.95 1.68 3.50 1.60
1300.00 18.24 7.00 9.43 2.66 5.60 1.72 0.82 2.40 - 33.79 8.20 14.83 4.92 6.60 2.70 1.68 3.90 1.56
1400.00 15.55 7.50 8.06 2.44 6.00 1.58 0.82 2.40 - 28.74 8.80 12.69 4.51 7.10 2.49 1.68 4.20 1.56
1500.00 13.39 8.00 6.98 2.25 6.40 1.45 0.82 3.20 - 24.70 9.40 10.98 4.15 7.50 2.31 1.68 4.60 1.52
1600.00 11.73 8.90 5.85 2.10 7.10 1.31 0.82 3.50 - 21.65 10.50 9.14 3.88 8.40 2.05 1.68 5.00 1.49
1700.00 10.36 9.90 4.96 1.97 7.90 1.18 0.82 3.80 - 19.13 11.70 7.70 3.64 9.40 1.83 1.68 5.50 1.44
1800.00 9.21 10.80 4.25 1.86 8.70 1.07 0.82 4.20 - 17.01 13.00 6.55 3.43 10.40 1.65 1.68 5.90 1.42
1900.00 8.24 11.80 3.67 1.75 9.50 0.98 0.82 4.60 - 15.23 14.30 5.63 3.24 11.40 1.50 1.68 6.50 1.36
2000.00 7.41 12.90 3.20 1.66 10.30 0.90 0.82 5.10 - 13.71 15.60 4.87 3.07 12.50 1.36 1.68 7.10 1.31
2200.00 6.14 15.60 2.40 1.51 12.50 0.74 0.77 6.40 0.74 10.97 18.00 3.73 2.70 14.40 1.15 1.60 8.50 1.15
2400.00 5.17 18.60 1.85 1.39 14.90 0.62 0.72 7.70 0.62 8.91 20.30 2.93 2.40 16.20 0.98 1.50 10.10 0.98
2600.00 4.42 21.90 1.46 1.29 17.50 0.53 0.68 9.20 0.53 7.33 22.60 2.35 2.14 18.10 0.85 1.42 12.00 0.85
2800.00 3.82 25.50 1.17 1.20 20.40 0.46 0.65 11.10 0.46 6.10 24.80 1.91 1.91 19.90 0.75 1.34 14.00 0.75
3000.00 3.33 29.30 0.95 1.12 23.40 0.40 0.62 12.90 0.40 5.12 27.00 1.58 1.72 21.60 0.66 1.28 16.10 0.66
3200.00 2.93 33.30 0.78 1.05 26.70 0.35 0.59 15.00 0.35 4.26 29.00 1.30 1.53 23.20 0.58 1.19 18.00 0.58
3400.00 2.60 37.60 0.65 0.99 30.10 0.31 0.56 17.00 0.31 3.55 30.90 1.09 1.35 24.70 0.52 1.13 20.10 0.52
3600.00 2.31 42.20 0.55 0.93 33.80 0.28 0.54 19.60 0.28 2.98 32.50 0.92 1.20 26.00 0.46 1.06 23.00 0.46
3800.00 2.08 47.00 0.47 0.88 37.60 0.25 0.52 22.20 0.25 2.50 33.90 0.78 1.06 27.10 0.41 1.00 25.60 0.41
4000.00 1.88 52.10 0.40 0.84 41.70 0.22 0.50 24.80 0.22 2.10 34.90 0.67 0.94 28.00 0.37 0.94 28.00 0.37
Uniform Load Line Load Point Load
G06520G06512
Uniform Load Line Load Point Load
Span (mm) WS DFLN WD WS DFLN WD WS DFLN WD WS DFLN WD WS DFLN WD WS DFLN W
kPa mm kPa kN mm kN kN mm kN kPa mm kPa kN mm kN kN mm kN
600.00 78.57 3.60 36.13 5.28 2.90 3.03 0.82 1.70 - 141.22 4.20 55.70 9.49 3.40 4.68 1.68 2.10 -
700.00 59.96 4.00 29.07 4.67 3.20 2.85 0.82 1.80 - 108.11 4.70 45.20 8.48 3.70 4.43 1.68 2.30 -
800.00 47.00 4.40 23.71 4.21 3.50 2.66 0.82 1.90 - 86.10 5.20 37.00 7.71 4.10 4.12 1.68 2.50 -
900.00 38.24 4.90 19.62 3.86 3.90 2.47 0.82 2.00 - 70.67 5.80 30.74 7.12 4.60 3.87 1.68 2.70 -
1000.00 31.88 5.40 16.47 3.57 4.30 2.31 0.82 2.20 - 59.37 6.40 25.87 6.65 5.10 3.62 1.68 3.00 -
1100.00 26.06 5.90 13.44 3.21 4.70 2.08 0.82 2.20 - 48.44 7.00 21.12 5.97 5.60 3.25 1.68 3.30 -
1200.00 21.65 6.50 11.17 2.91 5.20 1.88 0.82 2.40 - 40.18 7.60 17.56 5.40 6.10 2.95 1.68 3.50 1.60
1300.00 18.24 7.00 9.43 2.66 5.60 1.72 0.82 2.40 - 33.79 8.20 14.83 4.92 6.60 2.70 1.68 3.90 1.56
1400.00 15.55 7.50 8.06 2.44 6.00 1.58 0.82 2.40 - 28.74 8.80 12.69 4.51 7.10 2.49 1.68 4.20 1.56
1500.00 13.39 8.00 6.98 2.25 6.40 1.45 0.82 3.20 - 24.70 9.40 10.98 4.15 7.50 2.31 1.68 4.60 1.52
1600.00 11.73 8.90 5.85 2.10 7.10 1.31 0.82 3.50 - 21.65 10.50 9.14 3.88 8.40 2.05 1.68 5.00 1.49
1700.00 10.36 9.90 4.96 1.97 7.90 1.18 0.82 3.80 - 19.13 11.70 7.70 3.64 9.40 1.83 1.68 5.50 1.44
1800.00 9.21 10.80 4.25 1.86 8.70 1.07 0.82 4.20 - 17.01 13.00 6.55 3.43 10.40 1.65 1.68 5.90 1.42
1900.00 8.24 11.80 3.67 1.75 9.50 0.98 0.82 4.60 - 15.23 14.30 5.63 3.24 11.40 1.50 1.68 6.50 1.36
2000.00 7.41 12.90 3.20 1.66 10.30 0.90 0.82 5.10 - 13.71 15.60 4.87 3.07 12.50 1.36 1.68 7.10 1.31
2200.00 6.14 15.60 2.40 1.51 12.50 0.74 0.77 6.40 0.74 10.97 18.00 3.73 2.70 14.40 1.15 1.60 8.50 1.15
2400.00 5.17 18.60 1.85 1.39 14.90 0.62 0.72 7.70 0.62 8.91 20.30 2.93 2.40 16.20 0.98 1.50 10.10 0.98
2600.00 4.42 21.90 1.46 1.29 17.50 0.53 0.68 9.20 0.53 7.33 22.60 2.35 2.14 18.10 0.85 1.42 12.00 0.85
2800.00 3.82 25.50 1.17 1.20 20.40 0.46 0.65 11.10 0.46 6.10 24.80 1.91 1.91 19.90 0.75 1.34 14.00 0.75
3000.00 3.33 29.30 0.95 1.12 23.40 0.40 0.62 12.90 0.40 5.12 27.00 1.58 1.72 21.60 0.66 1.28 16.10 0.66
3200.00 2.93 33.30 0.78 1.05 26.70 0.35 0.59 15.00 0.35 4.26 29.00 1.30 1.53 23.20 0.58 1.19 18.00 0.58
3400.00 2.60 37.60 0.65 0.99 30.10 0.31 0.56 17.00 0.31 3.55 30.90 1.09 1.35 24.70 0.52 1.13 20.10 0.52
3600.00 2.31 42.20 0.55 0.93 33.80 0.28 0.54 19.60 0.28 2.98 32.50 0.92 1.20 26.00 0.46 1.06 23.00 0.46
3800.00 2.08 47.00 0.47 0.88 37.60 0.25 0.52 22.20 0.25 2.50 33.90 0.78 1.06 27.10 0.41 1.00 25.60 0.41
4000.00 1.88 52.10 0.40 0.84 41.70 0.22 0.50 24.80 0.22 2.10 34.90 0.67 0.94 28.00 0.37 0.94 28.00 0.37
Uniform Load Line Load Point Load
G06520G06512
Uniform Load Line Load Point Load
Span (mm) WS DFLN WD WS DFLN WD WS DFLN WD WS DFLN WD WS DFLN WD WS DFLN W
kPa mm kPa kN mm kN kN mm kN kPa mm kPa kN mm kN kN mm kN
600.00 78.57 3.60 36.13 5.28 2.90 3.03 0.82 1.70 - 141.22 4.20 55.70 9.49 3.40 4.68 1.68 2.10 -
700.00 59.96 4.00 29.07 4.67 3.20 2.85 0.82 1.80 - 108.11 4.70 45.20 8.48 3.70 4.43 1.68 2.30 -
800.00 47.00 4.40 23.71 4.21 3.50 2.66 0.82 1.90 - 86.10 5.20 37.00 7.71 4.10 4.12 1.68 2.50 -
900.00 38.24 4.90 19.62 3.86 3.90 2.47 0.82 2.00 - 70.67 5.80 30.74 7.12 4.60 3.87 1.68 2.70 -
1000.00 31.88 5.40 16.47 3.57 4.30 2.31 0.82 2.20 - 59.37 6.40 25.87 6.65 5.10 3.62 1.68 3.00 -
1100.00 26.06 5.90 13.44 3.21 4.70 2.08 0.82 2.20 - 48.44 7.00 21.12 5.97 5.60 3.25 1.68 3.30 -
1200.00 21.65 6.50 11.17 2.91 5.20 1.88 0.82 2.40 - 40.18 7.60 17.56 5.40 6.10 2.95 1.68 3.50 1.60
1300.00 18.24 7.00 9.43 2.66 5.60 1.72 0.82 2.40 - 33.79 8.20 14.83 4.92 6.60 2.70 1.68 3.90 1.56
1400.00 15.55 7.50 8.06 2.44 6.00 1.58 0.82 2.40 - 28.74 8.80 12.69 4.51 7.10 2.49 1.68 4.20 1.56
1500.00 13.39 8.00 6.98 2.25 6.40 1.45 0.82 3.20 - 24.70 9.40 10.98 4.15 7.50 2.31 1.68 4.60 1.52
1600.00 11.73 8.90 5.85 2.10 7.10 1.31 0.82 3.50 - 21.65 10.50 9.14 3.88 8.40 2.05 1.68 5.00 1.49
1700.00 10.36 9.90 4.96 1.97 7.90 1.18 0.82 3.80 - 19.13 11.70 7.70 3.64 9.40 1.83 1.68 5.50 1.44
1800.00 9.21 10.80 4.25 1.86 8.70 1.07 0.82 4.20 - 17.01 13.00 6.55 3.43 10.40 1.65 1.68 5.90 1.42
1900.00 8.24 11.80 3.67 1.75 9.50 0.98 0.82 4.60 - 15.23 14.30 5.63 3.24 11.40 1.50 1.68 6.50 1.36
2000.00 7.41 12.90 3.20 1.66 10.30 0.90 0.82 5.10 - 13.71 15.60 4.87 3.07 12.50 1.36 1.68 7.10 1.31
2200.00 6.14 15.60 2.40 1.51 12.50 0.74 0.77 6.40 0.74 10.97 18.00 3.73 2.70 14.40 1.15 1.60 8.50 1.15
2400.00 5.17 18.60 1.85 1.39 14.90 0.62 0.72 7.70 0.62 8.91 20.30 2.93 2.40 16.20 0.98 1.50 10.10 0.98
2600.00 4.42 21.90 1.46 1.29 17.50 0.53 0.68 9.20 0.53 7.33 22.60 2.35 2.14 18.10 0.85 1.42 12.00 0.85
2800.00 3.82 25.50 1.17 1.20 20.40 0.46 0.65 11.10 0.46 6.10 24.80 1.91 1.91 19.90 0.75 1.34 14.00 0.75
3000.00 3.33 29.30 0.95 1.12 23.40 0.40 0.62 12.90 0.40 5.12 27.00 1.58 1.72 21.60 0.66 1.28 16.10 0.66
3200.00 2.93 33.30 0.78 1.05 26.70 0.35 0.59 15.00 0.35 4.26 29.00 1.30 1.53 23.20 0.58 1.19 18.00 0.58
3400.00 2.60 37.60 0.65 0.99 30.10 0.31 0.56 17.00 0.31 3.55 30.90 1.09 1.35 24.70 0.52 1.13 20.10 0.52
3600.00 2.31 42.20 0.55 0.93 33.80 0.28 0.54 19.60 0.28 2.98 32.50 0.92 1.20 26.00 0.46 1.06 23.00 0.46
3800.00 2.08 47.00 0.47 0.88 37.60 0.25 0.52 22.20 0.25 2.50 33.90 0.78 1.06 27.10 0.41 1.00 25.60 0.41
4000.00 1.88 52.10 0.40 0.84 41.70 0.22 0.50 24.80 0.22 2.10 34.90 0.67 0.94 28.00 0.37 0.94 28.00 0.37
Uniform Load Line Load Point Load
G06520G06512
Uniform Load Line Load Point Load
Span (mm) WS DFLN WD WS DFLN WD WS DFLN WD WS DFLN WD WS DFLN WD WS DFLN W
kPa mm kPa kN mm kN kN mm kN kPa mm kPa kN mm kN kN mm kN
600.00 78.57 3.60 36.13 5.28 2.90 3.03 0.82 1.70 - 141.22 4.20 55.70 9.49 3.40 4.68 1.68 2.10 -
700.00 59.96 4.00 29.07 4.67 3.20 2.85 0.82 1.80 - 108.11 4.70 45.20 8.48 3.70 4.43 1.68 2.30 -
800.00 47.00 4.40 23.71 4.21 3.50 2.66 0.82 1.90 - 86.10 5.20 37.00 7.71 4.10 4.12 1.68 2.50 -
900.00 38.24 4.90 19.62 3.86 3.90 2.47 0.82 2.00 - 70.67 5.80 30.74 7.12 4.60 3.87 1.68 2.70 -
1000.00 31.88 5.40 16.47 3.57 4.30 2.31 0.82 2.20 - 59.37 6.40 25.87 6.65 5.10 3.62 1.68 3.00 -
1100.00 26.06 5.90 13.44 3.21 4.70 2.08 0.82 2.20 - 48.44 7.00 21.12 5.97 5.60 3.25 1.68 3.30 -
1200.00 21.65 6.50 11.17 2.91 5.20 1.88 0.82 2.40 - 40.18 7.60 17.56 5.40 6.10 2.95 1.68 3.50 1.60
1300.00 18.24 7.00 9.43 2.66 5.60 1.72 0.82 2.40 - 33.79 8.20 14.83 4.92 6.60 2.70 1.68 3.90 1.56
1400.00 15.55 7.50 8.06 2.44 6.00 1.58 0.82 2.40 - 28.74 8.80 12.69 4.51 7.10 2.49 1.68 4.20 1.56
1500.00 13.39 8.00 6.98 2.25 6.40 1.45 0.82 3.20 - 24.70 9.40 10.98 4.15 7.50 2.31 1.68 4.60 1.52
1600.00 11.73 8.90 5.85 2.10 7.10 1.31 0.82 3.50 - 21.65 10.50 9.14 3.88 8.40 2.05 1.68 5.00 1.49
1700.00 10.36 9.90 4.96 1.97 7.90 1.18 0.82 3.80 - 19.13 11.70 7.70 3.64 9.40 1.83 1.68 5.50 1.44
1800.00 9.21 10.80 4.25 1.86 8.70 1.07 0.82 4.20 - 17.01 13.00 6.55 3.43 10.40 1.65 1.68 5.90 1.42
1900.00 8.24 11.80 3.67 1.75 9.50 0.98 0.82 4.60 - 15.23 14.30 5.63 3.24 11.40 1.50 1.68 6.50 1.36
2000.00 7.41 12.90 3.20 1.66 10.30 0.90 0.82 5.10 - 13.71 15.60 4.87 3.07 12.50 1.36 1.68 7.10 1.31
2200.00 6.14 15.60 2.40 1.51 12.50 0.74 0.77 6.40 0.74 10.97 18.00 3.73 2.70 14.40 1.15 1.60 8.50 1.15
2400.00 5.17 18.60 1.85 1.39 14.90 0.62 0.72 7.70 0.62 8.91 20.30 2.93 2.40 16.20 0.98 1.50 10.10 0.98
2600.00 4.42 21.90 1.46 1.29 17.50 0.53 0.68 9.20 0.53 7.33 22.60 2.35 2.14 18.10 0.85 1.42 12.00 0.85
2800.00 3.82 25.50 1.17 1.20 20.40 0.46 0.65 11.10 0.46 6.10 24.80 1.91 1.91 19.90 0.75 1.34 14.00 0.75
3000.00 3.33 29.30 0.95 1.12 23.40 0.40 0.62 12.90 0.40 5.12 27.00 1.58 1.72 21.60 0.66 1.28 16.10 0.66
3200.00 2.93 33.30 0.78 1.05 26.70 0.35 0.59 15.00 0.35 4.26 29.00 1.30 1.53 23.20 0.58 1.19 18.00 0.58
3400.00 2.60 37.60 0.65 0.99 30.10 0.31 0.56 17.00 0.31 3.55 30.90 1.09 1.35 24.70 0.52 1.13 20.10 0.52
3600.00 2.31 42.20 0.55 0.93 33.80 0.28 0.54 19.60 0.28 2.98 32.50 0.92 1.20 26.00 0.46 1.06 23.00 0.46
3800.00 2.08 47.00 0.47 0.88 37.60 0.25 0.52 22.20 0.25 2.50 33.90 0.78 1.06 27.10 0.41 1.00 25.60 0.41
4000.00 1.88 52.10 0.40 0.84 41.70 0.22 0.50 24.80 0.22 2.10 34.90 0.67 0.94 28.00 0.37 0.94 28.00 0.37
Uniform Load Line Load Point Load
G06520G06512
Uniform Load Line Load Point Load
Span (mm) WS DFLN WD WS DFLN WD WS DFLN WD WS DFLN WD WS DFLN WD WS DFLN W
kPa mm kPa kN mm kN kN mm kN kPa mm kPa kN mm kN kN mm kN
600.00 78.57 3.60 36.13 5.28 2.90 3.03 0.82 1.70 - 141.22 4.20 55.70 9.49 3.40 4.68 1.68 2.10 -
700.00 59.96 4.00 29.07 4.67 3.20 2.85 0.82 1.80 - 108.11 4.70 45.20 8.48 3.70 4.43 1.68 2.30 -
800.00 47.00 4.40 23.71 4.21 3.50 2.66 0.82 1.90 - 86.10 5.20 37.00 7.71 4.10 4.12 1.68 2.50 -
900.00 38.24 4.90 19.62 3.86 3.90 2.47 0.82 2.00 - 70.67 5.80 30.74 7.12 4.60 3.87 1.68 2.70 -
1000.00 31.88 5.40 16.47 3.57 4.30 2.31 0.82 2.20 - 59.37 6.40 25.87 6.65 5.10 3.62 1.68 3.00 -
1100.00 26.06 5.90 13.44 3.21 4.70 2.08 0.82 2.20 - 48.44 7.00 21.12 5.97 5.60 3.25 1.68 3.30 -
1200.00 21.65 6.50 11.17 2.91 5.20 1.88 0.82 2.40 - 40.18 7.60 17.56 5.40 6.10 2.95 1.68 3.50 1.60
1300.00 18.24 7.00 9.43 2.66 5.60 1.72 0.82 2.40 - 33.79 8.20 14.83 4.92 6.60 2.70 1.68 3.90 1.56
1400.00 15.55 7.50 8.06 2.44 6.00 1.58 0.82 2.40 - 28.74 8.80 12.69 4.51 7.10 2.49 1.68 4.20 1.56
1500.00 13.39 8.00 6.98 2.25 6.40 1.45 0.82 3.20 - 24.70 9.40 10.98 4.15 7.50 2.31 1.68 4.60 1.52
1600.00 11.73 8.90 5.85 2.10 7.10 1.31 0.82 3.50 - 21.65 10.50 9.14 3.88 8.40 2.05 1.68 5.00 1.49
1700.00 10.36 9.90 4.96 1.97 7.90 1.18 0.82 3.80 - 19.13 11.70 7.70 3.64 9.40 1.83 1.68 5.50 1.44
1800.00 9.21 10.80 4.25 1.86 8.70 1.07 0.82 4.20 - 17.01 13.00 6.55 3.43 10.40 1.65 1.68 5.90 1.42
1900.00 8.24 11.80 3.67 1.75 9.50 0.98 0.82 4.60 - 15.23 14.30 5.63 3.24 11.40 1.50 1.68 6.50 1.36
2000.00 7.41 12.90 3.20 1.66 10.30 0.90 0.82 5.10 - 13.71 15.60 4.87 3.07 12.50 1.36 1.68 7.10 1.31
2200.00 6.14 15.60 2.40 1.51 12.50 0.74 0.77 6.40 0.74 10.97 18.00 3.73 2.70 14.40 1.15 1.60 8.50 1.15
2400.00 5.17 18.60 1.85 1.39 14.90 0.62 0.72 7.70 0.62 8.91 20.30 2.93 2.40 16.20 0.98 1.50 10.10 0.98
2600.00 4.42 21.90 1.46 1.29 17.50 0.53 0.68 9.20 0.53 7.33 22.60 2.35 2.14 18.10 0.85 1.42 12.00 0.85
2800.00 3.82 25.50 1.17 1.20 20.40 0.46 0.65 11.10 0.46 6.10 24.80 1.91 1.91 19.90 0.75 1.34 14.00 0.75
3000.00 3.33 29.30 0.95 1.12 23.40 0.40 0.62 12.90 0.40 5.12 27.00 1.58 1.72 21.60 0.66 1.28 16.10 0.66
3200.00 2.93 33.30 0.78 1.05 26.70 0.35 0.59 15.00 0.35 4.26 29.00 1.30 1.53 23.20 0.58 1.19 18.00 0.58
3400.00 2.60 37.60 0.65 0.99 30.10 0.31 0.56 17.00 0.31 3.55 30.90 1.09 1.35 24.70 0.52 1.13 20.10 0.52
3600.00 2.31 42.20 0.55 0.93 33.80 0.28 0.54 19.60 0.28 2.98 32.50 0.92 1.20 26.00 0.46 1.06 23.00 0.46
3800.00 2.08 47.00 0.47 0.88 37.60 0.25 0.52 22.20 0.25 2.50 33.90 0.78 1.06 27.10 0.41 1.00 25.60 0.41
4000.00 1.88 52.10 0.40 0.84 41.70 0.22 0.50 24.80 0.22 2.10 34.90 0.67 0.94 28.00 0.37 0.94 28.00 0.37
Uniform Load Line Load Point Load
G06520G06512
Uniform Load Line Load Point Load
Span (mm)
INTER
LOK
II ®10
LOAD TABLES
The allowable load tables provide the safe working load, the deflection produced by the load and the load which will produce a deflection of span/360 for uniformly distributed, concentrated line and point loads.
A line load must extend across the full width of the section so that it is applied to both legs.
A point load is assumed to be applied at the mid point of a single rib. If the load is applied over more than one rib, the allowable load may be increased by the number of ribs until the limits of the concentrated line load is reached.
Deflection limits of span/360 are suitable for most INTERLOK® II applications. At the discretion of the designer, other loads and deflections up to the safe working load may be obtained by proportion.
Irrespective of the design loads involved, INTERLOK® II grating subject to heavy and continuous foot traffic, such as stairways, should be 2.0mm thick.
AS 1657 requires that the grating adequately carry the more severe of 2.5 kPa uniformly distributed, or 1kN concentrated load. With deflection limited to span/360, maximum recommended spans are:
G06512 1900mm
G06520 2400mm
STANDARD SPECIFICATION
The grating shall be INTERLOK® II manufactured by BlueScope Lysaght.
Grating shall be provided in areas detailed on the drawings and shall be supplied in individual units 224mm wide. Grating shall be in 6 m lengths, except those areas requiring custom-cut lengths within the standard LYSAGHT range.
Grating shall interlock with male/female legs, providing a friction lock so that no horizontal movement between units can occur. The outside leg of all areas shall be a male leg.
Grating shall be manufactured from zincformI steel strip conforming to AS 1397-G300-Z275 (300 MPa minimum yield stress, 275g/mI coating mass).
The surface shall provide at least 29% open area. Openings shall be 186mm long and approximately 14mm wide when measured at 90° to the long dimension.
The grating shall be made from 1.2 or 2.0mm base thickness steel. The grating height shall be nominally 65mm. The grating shall be capable of carrying a uniform distribution load of ... kPa and a concentrated load of ... kN (see load table). The surface shall be ... (Anti-skid or Regular).
The Anti-skid surface, where specified, shall provide 360° positive traction and be formed by tapered, self-cleaning teeth, approximately 1.5mm high. These teeth shall have slots approximately 1mm wide x 10mm long and be uniformly spaced with approximately 800 teeth per mI.
QUICK SELECTION TABLE
UNIFORM LOAD
kgs per square metre of floor.
Working load based on deflection of span/360
Span G06512 G06520
600 3540 5459
700 2849 4462
800 2324 3626
900 1923 3013
1000 1614 2535
1100 1317 2070
1200 1095 1721
1300 924 1453
1400* 790* 1244
1500 684 1073
1600 573 896
1700* 486 755*
1800 417 642
1900 360 552
2000 314 477
2200 235 366
2400 181 287
2600 143 230
2800 115 187
3000 93 155
3200 76 127
3400 64 107
3600 54 90
3800 46 76
4000 39 66
Notes: *eg. if the load requirement for a floor is 750kg/mI, then G06512 over 1400mm or G06520 over 1700mm span may be used.
THIS PAGE IS INTENTIONALLY LEFT BLANK
WWW.LYSAGHT.COM
Technical enquiries: [email protected] or call 1800 641 417
LYSAGHT® and INTERLOK® II are registered trademarks of BlueScope Steel Limited, ABN 16 000 011 058. The LYSAGHT® range of products is exclusively made by or for BlueScope Steel Limited trading as Lysaght.
PRODUCT DESCRIPTIONS
• All descriptions, specifications, illustrations, drawings, data, dimensions and weights contained in this catalogue, all technical literature and websites containing information from Lysaght are approximations only. They are intended by Lysaght to be a general description for information and identification purposes and do not create a sale by description. Lysaght reserves the right at any time to: (a) supply Goods with such minor modifications from its drawings and specifications as it sees fit; and (b) alter specifications shown in its promotional literature to reflect changes made after the date of such publication.
DISCLAIMER, WARRANTIES AND LIMITATION OF LIABILITY
• This publication is intended to be an aid for all trades and professionals involved with specifying and installing Lysaght products and not to be a substitute for professional judgement.
• Terms and conditions of sale available at local Lysaght sales offices.
• Except to the extent to which liability may not lawfully be excluded or limited, BlueScope Steel Limited will not be under or incur any liability to you for any direct or indirect loss or damage (including, without limitation, consequential loss or damage such as loss of profit or anticipated profit, loss of use, damage to goodwill and loss due to delay) however caused (including, without limitation, breach of contract, negligence and/or breach of statute), which you may suffer or incur in connection with this publication.
© Copyright BlueScope Steel Limited 25 July, 2016
LYT0
061
25.0
7.16