internal hex mi€¦ · 28.095 11.018-p10 29.056 29.095 12.017-p10 12.018-p10 $27 $90 $27 $90 pack...
TRANSCRIPT
Final Screw- 1.27 hex
19.056 19.081 19.081
19.081-P10 19.081-P10
14.056 14.095 14.096
14.095-P10 14.096-P10
Impression Transfer
17.017 17.018
Straight Titanium Abutment
13.095 13.096
price
17.056
Includes both open & closed tray screw
Single Unit $13
$90
$13
$90
$39
$49
Titanium Analog - For 3D Printed Models
10 Pack
Titanium Healing Abutment
3mm 20.017/3 20.018/3
4mm 20.017/4 20.018/4
5mm 20.017/5 20.018/5
$24
15º 22.095 22.096
25º 23.09623.095
Angled Titanium Abutment $75
Use same analog for both 3D printing and stone model
Page 1 of 12
10 Pack
compatible with MIS® Seven
Single Unit
INTERNAL HEX MI
YELLOWNARROW
PURPLESTANDARD
GREENWIDE
2mm straight polished collar with 7mm chimney with SelectGrip sandblasted surface Includes screw 19.081 - torque is 30ncm
2mm straight polished collar with 7mm chimney with SelectGrip sandblasted surface Includes screw 19.081 - torque is 30ncm
Uses same screw driver (.050 hex/1.27hex) as OEM*
* MIS screw is a .050 hex. This is the same design for Zimmer, BioHorizons, Astra, Implant Direct, and mostof the internal hex implant screws. The driver is also referred to as a 1.25 also even though the actual measurement is a 1.27. If you need the driver please see page 8.
collar height
28.095
11.018-P10
29.056 29.095
12.017-P10 12.018-P10
$27
$90
$27
$90
Pack of 10- screw sold seperately
Single Unit
Pack of 10- screw sold seperately
Chrome Cobalt Abutment
30.095
$45
24.095
25.095
$31
All Plastic Castable Abutment
24.096
25.096
28.096
29.096
30.096
31.096
ø10mm 61.095 61.096
ø14mm 71.095 71.096
$38
$45
Premilled Abutment Blank
Titanium
Desktop Scan Body - Round top $25
50.017 50.018
non-engaging engaging
Unless indicated, all abutments include final screw part # 19.012 - torque to 30ncm
Library files for Exocad, 3Shape, and Dental Wings available on website Page 2 of 12
price
Titanium Temporary Abutment
Chrome Cobalt
Includes final screw part # 19.081 - torque is 30ncm
The Zimmer premill blanks can also be used Volume discounts available - Please contact us for details
$49
52.056 52.017 52.018
Intraoral Scan Body
28.056
11.017-P10
Single Unit
Screw sold seperately - Narrow is screw part #19.056 and Standard/Wide is screw part #19.081.
INTERNAL HEX MI
YELLOWNARROW
PURPLESTANDARD
GREENWIDE
All single units include screw - Narrow is part #19.056 and Standard/Wide is part #19.081 - torque is 30ncm
Diameter
50.056
Includes final screw part # 19.081 - torque is 30ncm
31.095
30.056
31.056
Includes wax up sleeve and screw - Narrow is part #19.056 and Standard/Wide is part #19.081 - torque is 30ncm
compatible with MIS® Seven
IO scan bodyTitanium with hard anodized matted surface.
Dimensions - 7.5mm height x 4mm width(measurements excluding platform connection).
Has an embedded screw for correct positioning. Optional scan body driver is available, part DTPEI, found on page 9.
NP RP WPGREEN3.5
PURPLE4.5
YELLOW5.7
0.3mm 15.095 15.096
0.8mm 15.056
1.5mm 15.295 15.296
3.0 mm 15.395 15.396
0.3mm 16.095 16.096
0.8mm 16.056
1.5mm 16.295 16.296
3.0 mm 16.395 16.396
$39
50.500-P10
50.600-P10
Scan Body on Ti base*
Non Engaging
Engaging
$50
Pack of 5
$59
non-engaging engaging Library files for Exocad, 3Shape, and Dental Wings available on website
Page 3 of 12
Straight Ti base*
50.500-P10
50.600-P10
50.500-P10
50.600-P10
AngleBase® Ti Base
36.017 36.018
37.017 37.018
$39
Includes screw # 19.417. Torque is 30ncm.
Up to 25º Angulated Screw Channel
0º 33.100-P5
10º 33.101-P5
Pack of 5
Pack of 5
Pack of 5 20º 33.102-P5
$50
The non engaging plastic sleeves can be used on all AngleBase ti bases.
33.100-P5
33.101-P5
33.102-P5
33.100-P5
33.101-P5
33.102-P5
32.001-P5 32.001-P532.001-P5
33.001-P5 33.001-P533.001-P5
Includes final screw - Narrow is part #19.056 and Standard/Wide is part #19.081 - torque is 30ncm
YELLOWNARROW
PURPLESTANDARD
GREENWIDE price
compatible with MIS® Seven
INTERNAL HEX MI
Plastic sleeves for Straight Ti base **
Plastic sleeves for AngleBase®**
** Plastic sleeves for casting or pressing. Castable should be cemented to ti base only.
collar height
Dimensions- 7.5mm height x 4mm width (measurements excluding platform connection)
* One size fits all. Slides over tibase, no screw required, autoclavable and reusable, available in package of 10 only. The engaging scan
body will slide onto the Straight and AngleBase® engaging ti bases. The non-engaging scan body will slide onto the Straight and AngleBase® non engaging ti bases. For use in creating restorations using straight ti base and AngleBase. FREE printable scan body STL available on website. The library file will either state (50.500 or 53.100) or (50.600 or 53.200) depending on which version you are using. Please check the part description on the website for a list of what of these scan bodies do not support (including all premills, multiunits, straumann tissue level, uniabutment, etc.) .
non-engaging engaging
40.019/1 40.020/1
40.019/2 40.020/2
40.019/3 40.020/3
40.019/4
1mm
2mm
3mm
4mm
5mm 40.019/5
41.719/217º 2.5mm
3.5mm 41.719/3
30º 3.5mm 43.019/3
43.019/4
$50
Includes abutment screw part #19.519. Use .050/1.25/1.27 driver. Torque is 20 ncm
$79
Torque is 30ncm. Requires straight multiunit driver.*
MULTI-UNIT PLATFORM4.8
Page 4 of 12
Multiunit Titanium Healing Abutment** $23
17.50717.507-P417.80717.807-P4
$39
$16$58
Impression Transfer for Multiunit**
Closed Tray Impression Transfer for Multiunit**
$16$58
Height
17º
30º
Hand tightens onto multiunit. Available as single and pack of 4 (P4).
Straight Multiunit Abutment
Angled Multiunit Abutment
4.5mm
price
17.007
Includes both open & closed tray screw
20.100
Screws onto multiunit abutment using Unigrip/Star driver screw. Drivers available.
Straight Multiunit Abutment are inserted using straight multiunit driver(part DTMURP- see page 8).
*This is the same straight multiunit driver used on Nobel®, Straumann®, 3i®, BioHorzions® and Megagen® Anyridge multiunits.** Impression transfers and healing abutments can be used on the following multiunits - DESS, Nobel®, 3i®, BioHorzions®, and Megagen® Anyridge.
5mm5mm8mm8mm
PURPLESTANDARD
GREENWIDE
compatible with DESS Multiunit for Internal Hex connected to MIS® Seven Implants
INTERNAL HEX MI
Collar Heights
Collar Heights
Page 5 of 12
INTERNAL HEX MI
non-engaging engaging
compatible with DESS Multiunit for Internal Hex connected to MIS® Seven Implants
$25
50.007
$49
$39
36.007Includes AngleBase screw part #19.306 - requires AngleBase Driver , see Page 8
$39
$131.27/.050 Hex final screw on top of Multiunit
AngleBase Ti Base on top of Multiunit Abutments
Intra Oral Scan Body for Multiunit
MULTI-UNIT PLATFORM4.8
price
Desktop Scan Body for Multiunit
Screw sold seperately , use screw part #19.110
52.007
A hard anodized matted surface enables accurate scanning . Has an embedded screw for correct
positioning and an optional scan body driver is available, part # DTPEI, found on page 9.
19.110Flat head screw for components screwed onto the top of multiunit. The driver used is a internal hex 1.27/050. Screw sold seperately.
Includes multiunit screw part #19.006 for unigrip/star driver.
Replace with screw part #19.110 for internal hex 1.27/050 driver.
15.007
15.007/8
Screw for Multiunit AngleBase 19.306 $13
Straight Ti Base on top of Multiunit Abutments
6.0mm vertical wall shaft
8.0mm vertical wall shaft
32.007-P5 Pack of 5
$50
Up to 25º Angulated Screw Channel
* Plastic sleeves for casting or pressing. Castable should be cemented to ti base only. Screw sold seperately.
Plastic sleeve for straight ti base on top of Multiunit*
Torque screw to 15ncm.
Library files for Exocad, 3Shape, and Dental Wings available on website
4.5mm vertical wall shaft
non-engagingPage 6 of 12
INTERNAL HEX MIcompatible with DESS Multiunit for Internal Hex connected to MIS® Seven Implants
28.007Single Unit
Pack of 10, screw sold seperately 11.007-P10
$27
$90
Chrome Cobalt Abutment on top of Multiunit
30.007$45
DESS LOC on top of Multiunit
88.007$65
Unless noted, all abutments on top of the multiunit include a unigrip/star driver screw, part #19.006.
Torque is 15ncm. For the multiunit mini screw with the .050 hex top use part #19.110 (sold seperately).
$31
MULTI-UNIT PLATFORM4.8
price
24.007
Titanium Temporary Abutment on top of Multiunit
All Plastic Castable Abutment on top of Multiunit
14.00714.007-P10
$13$90
Multiunit Analog* - For 3D Printed Models
Single Unit10 Pack
Use same analog for both 3D printing and stone model
*Multiunit Analog can be used for the following multiunits - DESS, Nobel®, 3i®, BioHorzions®, and Megagen® Anyridge.
Screws onto the top of the Multiunit*
** The DESS LOC will screw onto the top of the following multiunits - DESS, Nobel®, 3i®, BioHorzions® , and Megagen® Anyridge.
Page 7 of 12
INTERNAL HEX MIcompatible with MIS® Seven/C1/V3 Multiunit Abutments Only
$1314.085
$49
$39
Intra Oral Scan Body for MIS Seven Multiunit Abutment
MULTI-UNIT PLATFORM4.8
price
Multiunit Analog for MIS Seven Multiunit Abutment
52.085
A hard anodized matted surface enables accurate scanning . Has an embedded screw for correct
positioning and an optional scan body driver is available, part # DTPEI, found on page 9.
Includes multiunit screw part #19.085 with .050/1.25/1.27 hex driver
15.085
19.085 $13
Straight Ti Base on top of MIS Seven Multiunit Abutments
6.0mm vertical wall shaft
Screw for Multiunit TiBase on top of MIS Seven Multiunit Abutments
Torque screw to 15ncmM1.6 screw thread
Library files for Exocad, 3Shape, and Dental Wings available on website
All of these components can also be used on top of the MIS Seven, MIS V3 and MIS C1 Mutliunit Abutments
Manual driver for Intraoral Scan Body
DTPEI
$55
DESS LOC
1.0mm 88.017/1 88.018/1
2.5mm 88.017/2 88.018/2
3.5mm 88.017/3 88.018/3
4.5mm 88.017/4 88.018/45.5mm 88.017/5
$65
DESS LOC Analog
14.054Pack of 10 14.054-P10
DESS LOC Transfer
Closed tray - made of POM 17.054
DESS LOC Retention Kits
x1 DLRK-P1 $25
$49divergence up to 20º
x2 DLRK-P2
divergence up to 40ºx1 DLER-P1
x2 DLER-P2
$13$90
$21
$25
$49
Torque is 30ncm
DESS LOC is compatible with Zest® instruments, inserts, and housings. Page 8 of 12 non-engaging engaging
Gingival Height
20º x4 1.5 Ibs / 680g DLN2-P4
20º x4 3.0 Ibs / 1360g DLN3-P4
20º x4 5.0 Ibs / 2270g DLN4-P4
40º x4 1.0 Ibs / 450g DLN1-P4
40º x4 2.0 Ibs / 910g DLN6-P4
40º x4 4.0 Ibs/ 1810g DLN7-P4
divergencebetweenimplants
up to
up to
up to
up to
up to
up to
Inserts $21
Inserts sold in pack of 4
Single Unit
PURPLESTANDARD
GREENWIDE price
compatible with MIS® Seven
INTERNAL HEX MI
20mm 35mm
.050/1.27mm Hex Latch Driver
DTC20H127 DT24H127 DT35H127
AngleBase Latch Driver
DT20TB06 DT24TB06 DT35TB06
DTMURP
4x4 Square Driver for inserting Straight Multiunit RP Abutments
TWADAP
DTLOC
DTANGSQ
Manual driver for Intraoral Scan Body
DTPEI
Laboratory handleMDTLAA
Premium laboratory handle
PHLAB
Thumb Knob Handle
7mm MDTMAN700
9mm MDTMAN900
DESS Chrome Cobalt
CRCO1000
$35
$65
$90
TBD
$47
$35
$45
$35
$35
$35
$55
Page 9 of 12
24mm
$35
price
For latch style drivers
4x4 Square adaptor for latch style driver
DESS LOC driver for 4x4 square torque wrench
Adaptor from straumann torque wrench to square connection
Titanium Blocks for Non Engaging or Angle Screw Channel Bridges
63.020
63.040
The diameter is 15mm and the length is 20mm
The diameter is 15mm and the length is 40mm
TBD
TBD
TBD - New products coming soon. Visit website for current availability and pricing
DTSTSQ
Latch style handpiece adaptor for 4x4 Square Connection
For latch style drivers
compatible with Zimmer® ,MIS® Seven, BioHorizons® Internal Hex
INTERNAL HEX MI
28.018
11.018-P10
29.017 29.018
12.017-P10 12.018-P10
$27
$90
$27
$90
Pack of 10- screw sold seperately
Single Unit
Pack of 10- screw sold seperately
Chrome Cobalt Abutment
30.017 30.018
31.018
$45
24.017$40
All Plastic Castable Abutment
ø10mm 61.017 61.018
ø14mm 71.017 71.018
$38
$45
Premilled Abutment Blank
Titaniumø14mm 62.017
Chrome Cobalt
Desktop Scan Body - Round top $25
50.017
non-engaging engaging
Library files for Exocad, 3Shape, and Dental Wings available on websitePage 10 of 12
Titanium Temporary Abutment
Volume discounts available - Please contact us for details
Includes wax up sleeve and screw part # 19.012
$49
52.017 52.018
Titanium Intraoral Scan Body
A hard anodized matted surface enables accurate scanning . Has an embedded screw for correct positioning and an optional scan body driver is available, part DTPEI, found on page 9.
28.017
11.017-P10
Single Unit
Screw sold seperately use screw #19.012
3.5 4.5
priceMIS® Seven - STANDARD WIDEZimmer® -
24.018
25.017 25.018
31.017
Single unit includes screw part # 19.012
Includes screw part # 19.012
Single unit includes screw part # 19.012
50.018
MIS® Seven & Zimmer® Cross Compatible Components
3.5 4.5
Final Screw- 1.27 hex
19.012 19.012
19.012-P10 19.012-P10
14.017 14.018
14.017-P10 14.018-P10
Straight Titanium Abutment
13.017 13.018
price
10 Pack
Single Unit $13
$90
$13
$90
$49
Titanium Analog - For 3D Printed Models
10 Pack
15º 22.017 22.018
25º 23.017 23.018
Angled Titanium Abutment $75
Use same analog for both 3D printing and stone model
Uses same screw driver as OEM
Single Unit
MIS® Seven - STANDARD WIDE
2mm straight polished collar with 7mm chimney with SelectGrip sandblasted surface Includes screw 19.012 - torque is 30ncm
2mm straight polished collar with 7mm chimney with SelectGrip sandblasted surface Includes screw 19.012 - torque is 30ncm
Zimmer® -
0.3mm 15.018
0.8mm 15.017
1.5mm 15.217 15.218
3.0 mm 15.317 15.318
0.3mm 16.018
0.8mm 16.017
1.5mm 16.217 16.218
3.0 mm 16.317 16.318
$39Straight Ti base
Includes screw part # 19.012
Page 11 of 12
MIS® Seven & Zimmer® Cross Compatible Components
collar height
DESSREFERENCE
EQUIVALENT REF.Nº OF ORIGINAL IMPLANT BRAND
PACK OF 10 AVAILABLE
PLATFORM 1. SCREW SOCKET
2. HEAD DIAMETER
Screws fitting MIS® Seven and Zimmer implantsand similar internal hex implant systems
19.012 URS2available
all H1,27 2,30
19.012L all H1,27 2,30
19.042MHLAS (Zimmer)
availableall H1,27 1,95
19.056 3.0 H1,27 2,10
19.312 all Torx® 06 2,40
19.417 all Torx® 06 2,30
19.519 NP H1,27 2,45
19.110 SCTS RP (4,8) H1,27 2,00
19.300 RP (4,8) Torx® 06 2,15
standa
rd
standa
rd
standa
rd
DESSREFERENCE
EQUIVALENTREF.Nº OFORIGINALIMPLANTBRAND
PACKOF 10AVAILABLE
PLATFORM 1. SCREWSOCKET
2. HEADDIAMETER
3. HEAD BASE ANGLE
4. DISTANCEBETWEEN SCREW HEAD ANDIMPLANT PLATFORM
5. OVERALL LENGTH
6. HEAD LENGTH
7. DISTANCE FROM THREAD TO HEAD
8. THREAD LENGTH
9. THREAD KIND
RECOM-MENDED TORQUE
COMMENTSScrews fitting Zimmer and MIS® implantsand similar internal hex implant systems
19.012 URS2available
all H1,27 2,30
19.012L all H1,27 2,30
19.042MHLAS (Zimmer)
availableall H1,27 1,95
19.056 3.0 H1,27 2,10
19.312 all Torx® 06 2,40
19.417 all Torx® 06 2,30
19.519 NP H1,27 2,45
ON IMPLANT FOR MULTI-UNIT®
19.110 SCTS RP (4,8) H1,27 2,00
19.300 RP (4,8) Torx® 06 2,15
Screw fitting Ankylos® C/X implantsand similar implant systems
19.048available
H1,00 2,35
19.050 H1,00 2,35
19.349 Torx® 06 2,40
19º 8,20 2,55 3,05 2,60 UNF-1-72 30Ncm Use with DESS abutments
19º 8,95 2,55 3,80 2,60 UNF-1-72 30Ncm Use with DESS abutments. Long version
19º 8,20 2,49 2,95 2,76 UNF1-72 30NcmNarrow head fits Zimmer original abutments
120º 7,60 2,40 2,10 3,50 UNF-1-72 30NcmStandard screw
0º 7,10 1,50 1,30 2,70 UNF-1-72 30NcmSpecial screw head design Torx for angulated screw channels up to 25º
0º 1,40 6,30 1,40 2,90 2,00 UNF-1-72 30NcmReplacement screw for DESS ANGLEBase®
1,00 6,00 0,60 2,80 2,60 UNF 1-72 20NcmReplacement screw for Angled Multi-unit® ref. 41.719/x & 43.019/x
0º 2,80 3,45 1,35 0,00 2,10 M1,4 15Ncm
0º 3,95 1,50 0,50 1,95 UNF-1-72 15NcmSpecial screw head design Torx for angulated screw channels up to 25º,only for MIS®
Page 12 of 12
Replacement screw for ref. xx.007
MIS® Seven & Zimmer® Cross Compatible Components
19.306 RP (4,8) Torx® 06 2,20 0º 3,60 1,50 0,00 2,00 M1,4 15NcmReplacement screw for DESS ANGLEBase®. on Multiunit
19.085 2,15 0° 3,50 1,30 0,00 2,20 M1,6 25 N/cm
H1,27
Screw for MIS Seven, V3,C1 top of the Multiunit Abutment RP (4,8)
on MIS® Multiiunit Abutments
on DESS® Multiiunit Abutments for MIS Seven