internal hex prosthtics - biotec-implant.com
TRANSCRIPT
INTERNAL HEXPROSTHTICS
Internal Hex | Prosthetics
Biotec offers a wide range of easy-to-use and esthetic restorations and prosthetics for almost any clinical need. The diameters of these prosthetics are interchangeable based on preference and need.
2
Healing CapsUsed for internal Hex 2.42mm implants.
Healing caps shape the soft tissue around the implant and prepare the site for the superstructure insertion. The healing cap is selected based on the thickness of the mucosa. In addition, wide healing caps are used for soft-tissue contouring of molars and premolars.
We recommend hand-tightening using a 1,25mm hex. driver or a motor unit with a force of 10 Ncm.
Titanium Alloy - Ti 6Al 4V ELIMaterial Titanium Alloy - Ti 6Al 4V ELIMaterial
Height
Diameter
Catalog NumberHeight
Bio-HC38022 mm
Bio-HC38033 mm
Bio-HC38044 mm
Bio-HC38055 mm
Bio-HC38066 mm
Bio-HC38077 mm
Diameter Ø 3.8 mm Narrow
Catalog NumberHeight
Bio-HC46022 mm
Bio-HC46033 mm
Bio-HC46044 mm
Bio-HC46055 mm
Bio-HC46066 mm
Bio-HC46077 mm
Diameter Ø 4.6 mm
Internal Hex | Prosthetics
Biotec 2019 Product Catalog | 3
Catalog NumberHeight
Bio-HC55022 mm
Bio-HC55033 mm
Bio-HC55044 mm
Bio-HC55055 mm
Bio-HC55066 mm
Bio-HC55077 mm
Diameter Ø 5.5 mm
Catalog NumberHeight
Bio-HC63022 mm
Bio-HC63033 mm
Bio-HC63044 mm
Bio-HC63055 mm
Bio-HC63066 mm
Bio-HC63077 mm
Diameter Ø 6.3 mm
Internal Hex | Prosthetics
4
Internal Hex | Prosthetics
Straight AbutmentsOur wide variety of straight abutments remain stable even when their wall thickness is reduced to 0.1 mm. They are suitable for use in multiple scenarios, for example, single crowns, bridges and the fabrication of cement-retained restorations, single crowns and bridges.
We recommend tightening the screw at a torque between 25 and 30 Ncm
Titanium Alloy - Ti 6Al 4V ELIMaterial Titanium Alloy - Ti 6Al 4V ELIMaterial
Height
Shoulder
Catalog NumberHeight
Bio-SA59099 mm
Bio-SA591111 mm
Catalog NumberShoulderHeight
Bio-SH48011 mm8.5 mm
Bio-SH48022 mm9.5 mm
Bio-SH48033 mm10.5 mm
Bio-SH48044 mm11.5 mm
Catalog NumberShoulder
Bio-SHt50011.7 mmHex
Bio-SHt50021.7 mmNon-Hex
Straight ShoulderStraight
Biotec 2019 Product Catalog | 5
Internal Hex | Prosthetics
Catalog NumberHeight
Bio-SN60066 mm
Bio-SN60088 mm
Bio-SN601010 mm
Catalog NumberShoulderHeight
Bio-SA46011 mm9 mm
Bio-SA46022 mm10 mm
Bio-SA46033 mm11 mm
Bio-SA46044 mm12 mm
Catalog Number Bio-8324Included with all abutments or available separately
Straight ShoulderStraight Narrow
Diameter Ø 3.8 mm Diameter Ø 5.2 mm
Height
Diameter
HeightShoulder
Diameter
6
Internal Hex | Prosthetics
Catalog NumberHeight
Bio-ASA32077 mm
Bio-ASA32099 mm
Bio-ASA321111 mm
Angulated 15° Ø 4.5 mm
Angular Standard
Catalog NumberHeight
Bio-ASN36099 mm
Angulated 15° Ø 3.9 mm
Angular Standard Narrow
Angulated 15° Ø 5.4 mm
Catalog NumberShoulderHeight
Bio-AA24011 mm9.5 mm
Bio-AA24022 mm10.5 mm
Bio-AA24033 mm11.5 mm
Bio-AA24044 mm12.5 mm
Angular Anatomic
Angulated AbutmentsAngulated abutments are used when a change to the axis of the implant is required, and normally for constructing cement-retained single crows or bridges. They are available with 15°, 25°, 35° and 45° angles.
We recommend tightening the screw at a torque between 25 and 30 Ncm.
Titanium Alloy - Ti 6Al 4V ELIMaterial Titanium Alloy - Ti 6Al 4V ELIMaterial
Catalog Number Bio-8324Included with all abutments or available separately
Biotec 2019 Product Catalog | 7
Internal Hex | Prosthetics
Catalog NumberHeight
Bio-AS34077 mm
Bio-AS34099 mm
Bio-AS341111 mm
Angulated 25° Ø 4.5 mm
Angular Standard
Catalog NumberHeight
Bio-ASN36099 mm
Angulated 25° Ø 4.0 mm
Angular Standard Narrow
Catalog NumberHeight
Bio-AS35099 mm
Angulated 35°
Catalog NumberHeight
Bio-AS45099 mm
Angulated 45°
Angulated 25° Ø 5.4 mm
Catalog NumberShoulderHeight
Bio-AA26011 mm9.5 mm
Bio-AA26022 mm10.5 mm
Bio-AA26033 mm11.5 mm
Bio-AA26044 mm12.5 mm
Angular Anatomic
8
Internal Hex | Prosthetics
Temporary PEEK AbutmentsTemporary abutments are made from Polyetheretherketone (PEEK), which is a high-grade thermoplastic polymer certified for medical use and is well suited for use in the oral cavity.
PEEK offers a superior combination mechanical properties such as stiffness and strength, elasticity and resilience; is one of the most chemically-resistant materials; is proven to be biocompatible for both hard and soft tissue; has low electrical conductivity; and has a natural color which is a major aesthetic advantage.
PEEKMaterial
Technical Data:
• Does not create artifacts in X-Ray irradiation procedures, magnetic resonance imaging (MRI) and computed tomography (CT)
• Can be sterilized without changing its mechanical properties or its biocompatibility
• Has high compressive strength
• Does not contain metal additives to prevent ion exchange in the mouth
• The abutment closing torque is 15 Ncm
Catalog NumberShoulderHeight
Bio-SAP60011 mm9 mm
Bio-SAP60022 mm10 mm
Bio-SAP60033 mm11 mm
Straight Anatomic Peek
Biotec 2019 Product Catalog | 9
Internal Hex | Prosthetics
Angulated 15°
Angulated 25°
Catalog NumberShoulderHeight
Bio-AAP50011 mm9.5 mm
Bio-AAP50022 mm10.5 mm
Bio-AAP50033 mm11.5 mm
Catalog NumberShoulderHeight
Bio-AAP52011 mm9.5 mm
Bio-AAP52022 mm10.5 mm
Bio-AAP520313 mm11.5 mm
Angular Anatomic PEEK
Catalog Number Bio-8324
Included with all abutments or
available separately
10
Internal Hex | Prosthetics
Full Zirconia Abutments The zirconia abutment is an alternative esthetic. They are available as fully-cast zirconia material to traditional titanium with a range of shapes and sizes.
*anatomical design minimizes the need for abutment customization.
Ø 3.75 mm
Catalog NumberShoulderHeight
Bio-ZSA45000.5 mm8.5 mm
Bio-ZSA45011 mm9 mm
Bio-ZSA45022 mm10 mm
Bio-ZSA45033 mm11 mm
Straight Anatomic Zirconia
Ø 3.75 mm
Catalog NumberShoulderHeight
Bio-ZSA45000.5 mm8.5 mm
Standard Narrow, Straigh Zirconia
Biotec 2019 Product Catalog | 11
Internal Hex | Prosthetics
Diameter Ø 3.75 mm
Catalog NumberHeight
Bio-ZSN36099 mm
Angular Standard Narrow, Angle 15˚ Zirconia
Diameter Ø 3.75 mm
Catalog NumberShoulderHeight
Bio-ZAA23000.5 mm9.5 mm
Bio-ZAA24011 mm9.5 mm
Bio-ZAA24022 mm10.5 mm
Bio-ZAA24033 mm11.5 mm
Angular Anatomic, Angle 15˚ Zirconia
Diameter Ø 3.75 mm
Catalog NumberShoulderHeight
Bio-ZAA25000.5 mm9.5 mm
Bio-ZAA26011 mm9.5 mm
Bio-ZAA26022 mm10.5 mm
Bio-ZAA26033 mm11.5 mm
Angular Anatomic, Angle 25˚ Zirconia
12
Internal Hex | Prosthetics
Titanium-base Zirconia AbutmentsThe zirconia abutment is an alternative esthetic abutment. They are available as fully-cast zirconia material with a range of shapes and sizes.
ZirconiumMaterial
Diameter Ø 3.75 mm
Catalog NumberShoulderHeight
Bio-ZT11011 mm9 mm
Bio-ZT11022 mm10 mm
Bio-ZT11033 mm11 mm
Straight, Titanium Base
Diameter Ø 3.8 mm
Catalog NumberShoulderHeight
Bio-ZT15011 mm9.5 mm
Bio-ZT15022 mm10.5 mm
Bio-ZT15033 mm11.5 mm
Angular, Angle 15˚, Titanium Base
Biotec 2019 Product Catalog | 13
Internal Hex | Prosthetics
Diameter Ø 3.8 mm
Catalog NumberShoulderHeight
Bio-ZT25011 mm9.5 mm
Bio-ZT25022 mm10.5 mm
Bio-ZT25033 mm11.5 mm
Angular, Angle 25˚, Titanium Base
Catalog Number Bio-8324
Included with all abutments or
available separately
14
Internal Hex | Prosthetics
Plastic AbutmentsPlastic castable abutments on titanium bases are suitable for use by technicians for simple casting of custom-made abutments for constructing the prosthetic restoration.
These abutments enable the dental lab to cast on an accurate titanium base. The machined titanium base offers an accurate fit for the implant.
DelrinMaterial
Catalog Number
Bio-PL1002Hex
Bio-PL1001Non-Hex
Plastic for Casting
Catalog NumberShoulderHeight
Bio-PSA40011 mm9 mm
Bio-PSA40022 mm10 mm
Bio-PSA40033 mm11 mm
Straight Anatomic Plasic
Biotec 2019 Product Catalog | 15
Internal Hex | Prosthetics
Angulated 15°
Catalog NumberShoulderHeight
Bio-AAP30011 mm9 mm
Bio-AAP30022 mm10 mm
Bio-AAP30033 mm11 mm
Anatomic
Abutment Lock
Catalog Number
Bio-PS2001Hex
Bio-PS20031Straight Round
Bio-PS2004Straight
Plastic
Angulated 25°
Catalog NumberShoulderHeight
Bio-AAP32011 mm9 mm
Bio-AAP32022 mm10 mm
Bio-AAP32033 mm11 mm
Anatomic
Catalog Number Bio-8324
Included with all abutments or
available separately
16
Internal Hex | Prosthetics
Multi-Unit SystemThe multi-unit system is a solution for screw-retained prostheses, also on complicated-to-restore implants such as multiple-tilted implants. It comprises a full range of sizes for both the upper and lower jaws: straight, 17°, 30°, 45°, 52°, and 60° adaptors. It also includes a variety of heights and connects to a wide range of complementary products.
Titanium Alloy (Ti6AI4V ELI)Material
Catalog NumberHeight
Bio-M01011 mm
Bio-M01022 mm
Bio-M01033 mm
Straight Multi Unit
Catalog NumberHeight
Bio-AMU30011 mm
Bio-AMU30022 mm
Bio-AMU30033 mm
Angulated Multi Unit 18 mm
Catalog NumberHeight
Bio-MU18011 mm
Bio-MU18022 mm
Bio-MU18033 mm
Angulated Multi Unit 30 mm
Biotec 2019 Product Catalog | 17
Internal Hex | Prosthetics
Catalog NumberProduct Description
Bio-MOHC1Healing Cap
Bio-MTIOSShort titanium sleeve
Bio-OC2418Screw for open transfer
Bio-M0AN1Analog
Bio-MOSC1Screw Abutment
Bio-MPLO1Plastic Sleeve
Bio-MTIO1Titaniuem Sleeve
Bio-MOTR2Open Transfer
Multi-Unit Components
18
Internal Hex | Prosthetics
Open & Closed Tray TransfersFor all implant type diameters (Ø3.3, Ø3.75, Ø4.2, Ø5.0, Ø6.0 mm)
Tray transfers are designed for impressions using the open-tray technique when the retentions are sharp, and for the closed-tray technique when they are round.
Body - Stainless Steel; Screws - TitaniumMaterial
Catalog NumberHeight
Bio-SSC36018 mm
Diameter Ø 4.75 mm
Catalog NumberHeight
Bio-SSO42028 mm
Diameter Ø 4.5 mm
Catalog NumberHeight
Bio-SSC351112 mm
Diameter Ø 4.5 mm
Catalog NumberHeight
Bio-SSC350712 mm
Diameter Ø 3.85 mm
Catalog NumberHeight
Bio-SSO420112 mm
Diameter Ø 4.3 mm
Catalog NumberHeight
Bio-SSO40088 mm
Bio-SSO401212 mm
Diameter Ø 4.75 mm
Stainless Steel - Open Tray
Stainless Steel - Closed Tray
Bio-S2418
Bio-1610
24m
m
18m
m 16m
m
10m
m
Bio-1307 13m
m
7mm
Biotec 2019 Product Catalog | 19
Internal Hex | Prosthetics
Transfers with PlasticThe transfer with plastic is designed for impressions using the closed-tray technique with the plastic cap. The cap remains in the impression tray after it is removed from the mouth. This type of transfer can also be used as an esthetic abutment.
Titanium Alloy (Ti6AI4V ELI)Material
Catalog NumberHeight
Bio-PT44017 mm
Bio-PT440210 mm
Diameter Ø 4.75 mm
Plastic for Closed Tray
Catalog NumberHeight
Bio-TA38022 mm
Bio-TA38033 mm
Bio-TA38044 mm
Transfer Abutment
20
Implant AnalogImplant Analogs (IAs) can be used for all implant diameters (Ø3.3, Ø3.75, Ø4.2, Ø5.0, Ø6.0 mm).
We recommend using lab analogs with identical dimensions (for example IA5 and IA6) for Ø5.0 mm or Ø6.0 mm implants to ensure the best rendering of the clinical situation.
Internal Hex | Prosthetics
Open & Closed Tray TransfersThe click-on connection transfer for impressions without a screw is especially effective with molars and premolars where there is a limited space and where it is challenging to work with a driver. It has a hexagonal lock to ensure a tight fit and can be used for all types of impressions as its lack of screws helps save time.
Stainless SteelMaterial
Catalog NumberHeight
Bio-CT34099 mm
Bio-CT341313 mm
Diameter Ø 4.7 mm
Stainless Steel - Closed Tray
Catalog NumberHeight
Bio-AN600412.7 mm
Diameter Ø 4.0 mm
Analog, Stainless Steel
Catalog NumberHeight
Bio-AN600512.7 mm
Diameter Ø 5.0 mm
Analog, Stainless Steel
Biotec 2019 Product Catalog | 21
Internal Hex | Prosthetics
LocatorsThe locator attachment system is designed for use with full or partial dentures in mandible or maxilla.
The locator superstructure is used to secure a removal prosthesis. The attachment is used with a stainless steel cap and an intermediate Nylon insert.
Titanium Alloy (Ti6AI4V ELI)Material
Catalog NumberHeight
Bio-PCA011 mm
Bio-PCA022 mm
Bio-PCA033 mm
Bio-PCA044 mm
Bio-PCA055 mm
Locators
Catalog NumberMaterial
Bio-MT0004Metal
Bio-ES0005Silicon - Extra Soft
Bio-SS0006Silicon - Soft
Bio-ST0007Silicon - Standard
Bio-LA0008Laboratory
Components
22
Internal Hex | Prosthetics
Ball AttachmentThe ball attachment superstructure is used to secure a removal prosthesis. This attachment is used together with a stainless steel cap and an intermediate Nylon insert.
Titanium Alloy (Ti6AI4V ELI)Material
Catalog NumberHeight
Bio-BA120050.5 mm
Bio-BA12011 mm
Bio-BA12022 mm
Bio-BA12033 mm
Bio-BA12044 mm
Bio-BA12055 mm
Bio-BA12066 mm
Straight
Catalog NumberHeight
Bio-BA15011 mm
Bio-BA15022 mm
Bio-BA15033 mm
Angulated 15°
Catalog NumberHeight
Bio-BA25011 mm
Bio-BA25022 mm
Angulated 25°
Biotec 2019 Product Catalog | 23
Internal Hex | Prosthetics
for 2.5 mm Ball Attachment
Catalog NumberMaterial
Bio-S3002Silicon Extra Soft
Bio-S3003Silicon Soft
Bio-S3004Silicon Standard
Bio-S3005Peek
Internal Cap
Catalog NumberMaterial
Bio-MC3001Metal
Housing for Internal Cap
Order with Silicon Cap
24
MA
D
E IN G E R MANY
T. +49.6196.6521096
biotec-implant.com
Franzgraben 6,
34125 Kassel,
Germany
www.biotec-implant.com
Biotec 2019 Product Catalog | 25