internal measurement - tesatool.comtesatool.com/pdf_files/catalog_internal.pdf · c-2 internal...

Internal Measurement


C-1

C-2


Internal Measuring and RequirementsInternal measuring of bores is more demanding than external measurement ofworkpieces. Not only the tight tolerances given for the measuring job must berespected, but also the measuring components that have a direct influence onthe uncertainty of measurement must be designed in such a way that they canenter into the bore to be checked.

Advantage of 3-Line contact

TESA IMICRO, TRIOMATIC, TRI-O-BOR and ETALON INTALOMETER are self-centring and self-aligninginternal measuring instruments that make bore measurement reliableindependently of the sensitivity of the user.

The 3 measuringbolts spaced 120 °apart provide opti-mum self-centring.

Line contact of the 3 measuring bolts allowsthe instrument to align itself parallel to thecontact surfaces.

? ? ? ?

2-point contactdoes not allow theinstrument to alignitself in relation tothe bore axis.

2-point contact measuring instruments arenot self-centring. To make bore measure-ment easier, auxiliary means will addition-ally be used.

A single measuring instrument can replacehundreds of plug gauges

Unlike plug gauges that check onlyone toleranced size, a single instru-ment can measure many diameters.Depending on the model that is beingused, through bores and blind boresas well as short centring shoulderscan be measured, reliably.

Establishing form errors

Form errors are established by meas-urements made at several points onthe bore.

Measuring instruments with 3-line contact determine run-out errors in a triangular way.

Measuring instruments with 2-pointcontact measure medium-size diam-eters only. They do not allow the userto differentiate diameters measuredat various points.

Dmax. Dmin. D∆

C-3

TESA® IMICRO® «capa µ system®» with Digital Display

New TESA capacitive measuring system (patented) associated with the unique cone of the TESA IMICRO internal micrometers.

✓

DIN 863 T4(style C1)

0,001 mm 0.0005 in

mm / inConversion

LCD, 7 mmdigit height

Floatingzero

Display lock

Measuringfaces for

application ranges3,5 to 12 mm: hardenedsteel (770 HV)

11 to 100 mm: TIN hard-coating, 0,05 4000 to 6000 HV

100 to 300 mm: carbidetipped (1300 HV)

Opto-coupledRS 232 interface, bidirectional

3 V lithiumbattery

1 to 2 a(≈ 2000 h/a)

Automaticshut down after

10 min. Display settingis retained as long aspower supply remainsstable.

10 °C to 40 °C

–10 °C to 60 °C

80 %, with nocondensation

✓

Protection ofthe meas. ele-

ment IP 54 (IEC 60529)or IP 40 with use of digi-tal output

Plasticcase

Identificationnumber

In-house calibra-tion certificate

Declaration of conformity

mm in µm µm Amm Bmm Cmm

61.30101 3,5 ÷ 4 0.1377 ÷ 0.1574 4 4 2 1,5 2061.30102 4 ÷ 4,5 0.1574 ÷ 0.1771 4 4 2 1,5 2061.30103 4,5 ÷ 5,5 0.1771 ÷ 0.2165 4 4 2 1,5 2561.30104 5,5 ÷ 6,5 0.2165 ÷ 0.2559 4 4 2 1,5 2561.30105 6 ÷ 8 0.2362 ÷ 0.3150 4 4 2,5 2,5 5561.30106 8 ÷ 10 0.3150 ÷ 0.3970 4 4 2,5 2,5 5561.30107 10 ÷ 12 0.3970 ÷ 0.4724 4 4 2,5 2,5 5561.30108 11 ÷ 14 0.4330 ÷ 0.5512 4 4 3,5 4 6861.30109 14 ÷ 17 0.5512 ÷ 0.6693 4 4 3,5 4 6861.30110 17 ÷ 20 0.6693 ÷ 0.7874 4 4 3,5 4 8361.30111 20 ÷ 25 0.7874 ÷ 0.9843 4 4 7 7 8361.30112 25 ÷ 30 0.9843 ÷ 1.1811 4 4 7 7 8861.30113 30 ÷ 35 1.1811 ÷ 1.3780 4 4 7 7 8861.30114 35 ÷ 40 1.3780 ÷ 1.5748 4 4 7 7 8861.30115 40 ÷ 50 1.5748 ÷ 1.9685 5 5 11 12 9861.30116 50 ÷ 60 1.9685 ÷ 2.3622 5 5 11 12 9861.30117 60 ÷ 70 2.3622 ÷ 2.7560 5 5 11 12 9861.30118 70 ÷ 80 2.7560 ÷ 3.1496 5 5 11 12 9861.30119 80 ÷ 90 3.1496 ÷ 3.5433 5 5 11 12 9861.30120 90 ÷ 100 3.5433 ÷ 3.9370 5 5 11 12 9861.30121 100 ÷ 125 3.9370 ÷ 4.9212 6 6 26 18 10061.30122 125 ÷ 150 4.9212 ÷ 5.9055 6 6 26 18 10061.30123 150 ÷ 175 5.9055 ÷ 6.8897 7 7 26 18 10061.30124 175 ÷ 200 6.8897 ÷ 7.8740 7 7 26 18 10061.30125 200 ÷ 225 7.8740 ÷ 8.8582 8 8 26 18 10061.30126 225 ÷ 250 8.8582 ÷ 9.8425 8 8 26 18 10061.30127 250 ÷ 275 9.8425 ÷ 10.8267 8 8 26 18 10061.30128 275 ÷ 300 10.8267 ÷ 11.8110 8 8 26 18 100

Special Accessory

19.61000 1 Lithium battery - 3 V, 190 mAh, type CR 2032For ordering information on cables etc., see section L. Suited cases on page C-9.

Internal Micrometers

A

B

C

C-4

TESA® IMICRO® Partial Sets with«capa µ system®» and Digital Display


mm mm mm mm

Partial sets including : Meas. element Measuring heads Setting rings Extensions

61.30230 3,5 ÷ 6,5 61.30010 61.40020 3,5 ÷ 4 08.43200 4 –61.40021 4 ÷ 4,5 08.43201 5,561.40022 4,5 ÷ 5,561.40023 5,5 ÷ 6,5

61.30231 6 ÷ 12 61.30011 61.40024 6 ÷ 8 08.40101 8 08.40001 10061.40025 8 ÷ 10 08.40102 1061.40026 10 ÷ 12

61.30232 11 ÷ 20 61.30011 61.40027 11 ÷ 14 08.40103 11 08.40301 15061.40028 14 ÷ 17 08.40105 1761.40029 17 ÷ 20

61.30233 20 ÷ 40 61.30011 61.40030 20 ÷ 25 08.40106 25 08.41100 15061.40031 25 ÷ 30 08.40107 3561.40032 30 ÷ 3561.40033 35 ÷ 40

61.30234 40 ÷ 100 61.30011 61.40034 40 ÷ 50 08.40108 50 08.41800 15061.40035 50 ÷ 60 08.40109 7061.40036 60 ÷ 70 08.40110 9061.40037 70 ÷ 8061.40038 80 ÷ 9061.40039 90 ÷ 100

61.30235 100 ÷ 200 61.30012 61.40040 100 ÷ 125 08.40112 125 08.42600 15061.40041 125 ÷ 150 08.40113 17561.40042 150 ÷ 17561.40043 175 ÷ 200

✓


0,001 mm 0.00005 in

mm / inconversion


Floatingzero

Display lock

Measuringfaces for

application ranges3,5 to 12 mm: steelhardened to 770 HV

11 to 100 mm: TIN hard-coating, hardnessto 0,05 2300 HV.


Opto-coupledRS 232 interface, bidirectional.

3 V lithiumbattery

1 to 2 a(≈ 2000 h/a)


10 min. Display settingis retained as long aspower supply remainsstable.

10 °C to 40 °C

–10 °C to 60 °C


✓


ment IP 54 (IEC 60529)or IP 40 with use of digi-tal output

Plasticcase


In-house calibra-tion certificiate



C-5

TESA® IMICRO® Full Sets with«capa µ system®» and Digital Display


mm mm mm mm

Full sets including : Single instrument Setting rings Extensions

61.30220 3,5 ÷ 6,5 61.30101 3,5 ÷ 4 08.43200 4 –61.30102 4 ÷ 4,5 08.43201 5,561.30103 4,5 ÷ 5,561.30104 5,5 ÷ 6,5

61.30221 6 ÷ 12 61.30105 6 ÷ 8 08.40101 8 08.40001 10061.30106 8 ÷ 10 08.40102 1061.30107 10 ÷ 12

61.30222 11 ÷ 20 61.30108 11 ÷ 14 08.40103 11 08.40301 15061.30109 14 ÷ 17 08.40105 1761.30110 17 ÷ 20

61.30223 20 ÷ 40 61.30111 20 ÷ 25 08.40106 25 08.41100 15061.30112 25 ÷ 30 08.40107 3561.30113 30 ÷ 3561.30114 35 ÷ 40

61.30224 40 ÷ 100 61.30115 40 ÷ 50 08.40108 50 08.41800 15061.30116 50 ÷ 60 08.40109 7061.30117 60 ÷ 70 08.40110 9061.30118 70 ÷ 8061.30119 80 ÷ 9061.30120 90 ÷ 100

61.30225 100 ÷ 200 61.30121 100 ÷ 125 08.40112 125 08.42600 15061.30122 125 ÷ 150 08.40113 17561.30123 150 ÷ 17561.30124 175 ÷ 200

✓


0,001 mm 0.00005 in

mm / inconversion


Floatingzero

Display lock

Measuringfaces for

application ranges6 to 12 mm: hardenedsteel (770 HV)

11 to 100 mm: TIN hard-coating, 0,05 4000 to 6000 HV


Opto-coupledRS 232 interface, bidirectional.

3 V lithiumbattery

1 to 2 a(≈ 2000 h/a)

Automaticshut down

after 10 min. Display setting is retained aslong as power supplyremains stable.

10 °C to 40 °C

–10 °C to 60 °C


✓


ment IP 54 (IEC 60529)or IP 40 with use of digital output

Plasticcase


In-house calibra-tion certificate



C-6

mm mm µm µm Amm Bmm Cmm

08.13410 3,5 ÷ 4 0,001 4 4 2 1,5 2008.13411 4 ÷ 4,5 0,001 4 4 2 1,5 2008.13412 4,5 ÷ 5,5 0,001 4 4 2 1,5 2508.13413 5,5 ÷ 6,5 0,001 4 4 2 1,5 2508.10001 6 ÷ 8 0,001 4 4 2,5 2,5 5208.10002 8 ÷ 10 0,001 4 4 2,5 2,5 5208.10003 10 ÷ 12 0,001 4 4 2,5 2,5 5208.10801 11 ÷ 14 0,005 4 4 3,5 4 7708.10802 14 ÷ 17 0,005 4 4 3,5 4 7708.10803 17 ÷ 20 0,005 4 4 3,5 4 7708.11501 20 ÷ 25 0,005 4 4 7 7 7808.11502 25 ÷ 30 0,005 4 4 7 7 7808.11503 30 ÷ 35 0,005 4 4 7 7 7808.11504 35 ÷ 40 0,005 4 4 7 7 7808.12301 40 ÷ 50 0,005 5 5 11 12 8408.12302 50 ÷ 60 0,005 5 5 11 12 8408.12303 60 ÷ 70 0,005 5 5 11 12 8408.12304 70 ÷ 80 0,005 5 5 11 12 8408.12305 80 ÷ 90 0,005 5 5 11 12 8408.12306 90 ÷ 100 0,005 5 5 11 12 8408.12601 100 ÷ 125 0,01 6 6 26 18 8108.12602 125 ÷ 150 0,01 6 6 26 18 8108.12603 150 ÷ 175 0,01 7 7 26 18 8108.12604 175 ÷ 200 0,01 7 7 26 18 8108.13101 200 ÷ 225 0,01 8 8 26 18 8108.13102 225 ÷ 250 0,01 8 8 26 18 8108.13103 250 ÷ 275 0,01 8 8 26 18 8108.13104 275 ÷ 300 0,01 8 8 26 18 81

TESA® IMICRO®

with Analogue Indication, MetricSelf-centring and self-aligning internal micrometers. The high-precision thread, machined into the measuring cone, combined with the measuring bolts specially arranged to provide 3 line contact make the Imicros the onlymicrometers in the world that respect the ABBE principle.Made to measure depths, reliably. ✓


NF E 11-099

Models from3,5 to 12 mm

with vernier reading

Measuring faceson models from

3,5 to 12 mm: steelhardened to 770 HV

11 to 100 mm:titanium nitride hard-coating (TIN), hardness0,05 2300 HV.

100 to 300 mm: tungstencarbide tipped,hardness 1300 HV.

Applicationranges from

3,5 to 200 mm:shipping box

200 to 300 mm:wooden case with:1 extension 150 mm(08.42600)

Identification number

Inspection report

with a declaration of conformity

A C

B


C-7

mm mm mm mm

Full sets including : Single instruments Setting rings Extensions

08.13409 BAE 3,5 ÷ 6,5 08.13410 3,5 ÷ 4 08.43200 4 –08.13411 4 ÷ 4,5 08.43201 5,508.13412 4,5 ÷ 5,508.13413 5,5 ÷ 6,5

08.10000 BAF 6 ÷ 12 08.10001 6 ÷ 8 08.40101 8 08.40001 10008.10002 8 ÷10 08.40102 1008.10003 10 ÷12

08.10800 BAG 11 ÷ 20 08.10801 11 ÷ 14 08.40103 11 08.40301 15008.10802 14 ÷ 17 08.40105 1708.10803 17 ÷ 20

08.11500 BAH 20 ÷ 40 08.11501 20 ÷ 25 08.40106 25 08.41100 15008.11502 25 ÷ 30 08.40107 3508.11503 30 ÷ 3508.11504 35 ÷ 40

08.12300 BAJ 40 ÷ 100 08.12301 40 ÷ 50 08.40108 50 08.41800 15008.12302 50 ÷ 60 08.40109 7008.12303 60 ÷ 70 08.40110 9008.12304 70 ÷ 8008.12305 80 ÷ 9008.12306 90 ÷ 100

08.12600 BAK 100 ÷ 200 08.12601 100 ÷ 125 08.40112 125 08.42600 15008.12602 125 ÷ 150 08.40113 17508.12603 150 ÷ 17508.12604 175 ÷ 200

✓


NF E 11-099


3,5 to 12 mm:hardened steel

11 to 100 mm:titanium nitride hard-coating (TIN), hardness0,05 2300 HV.

100 to 200 mm:tungsten carbide tipped

Additionaltechnical data:

see on previous page C-6

Setting rings on page C-24

Plastic caseor suitcase


Inspectionreport with a

declaration of conformity

TESA® IMICRO® with AnalogueIndication in Full Metric Sets


C-8

✓


NF E 11-099

Models from0.275 to 0.500 in

with vernier


0.275 to 0.500 in :hardened steel

0.50 to 4.0 in :hardenedsteel

4 to 12 in :tungsten carbide tipped

Additional-technical data:

see page C-6.Setting rings on page C-24

Single instruments:

shipping box. Full sets :plastic case or suitcase


Inspection report with a


in in

08.20001 0.275 ÷ 0.350 0.000108.20002 0.350 ÷ 0.425 0.000108.20003 0.425 ÷ 0.500 0.000108.20301 0.500 ÷ 0.600 0.000208.20302 0.600 ÷ 0.700 0.000208.20303 0.700 ÷ 0.800 0.000208.21101 0.800 ÷ 1.0 0.000208.21102 1.0 ÷ 1.2 0.000208.21103 1.2 ÷ 1.4 0.000208.21104 1.4 ÷ 1.6 0.000208.21801 1.6 ÷ 2.0 0.000208.21802 2.0 ÷ 2.4 0.000208.21803 2.4 ÷ 2.8 0.000208.21804 2.8 ÷ 3.2 0.000208.21805 3.2 ÷ 3.6 0.000208.21806 3.6 ÷ 4.0 0.000208.22601 4 ÷ 5 0.000508.22602 5 ÷ 6 0.000508.22603 6 ÷ 7 0.000508.22604 7 ÷ 8 0.000508.23101 8 ÷ 9 0.000508.23102 9 ÷ 10 0.000508.23103 10 ÷ 11 0.000508.23104 11 ÷ 12 0.0005

in in in

Full sets including : Single instr. Setting rings Extension

08.20000 BAFE 0.275 ÷ 0.50 08.20001 08.50101 0.35 08.50001 408.20002 08.50102 0.4308.20003

08.20300 BAGE 0.50 ÷ 0.80 08.20301 08.50103 0.50 08.50301 608.20302 08.50105 0.7008.20303

08.21100 BAHE 0.80 ÷ 1.6 08.21101 08.50106 1.0 08.51100 608.21102 08.50107 1.408.2110308.21104

08.21800 BAJE 1.6 ÷ 4.0 08.21801 08.50108 2.0 08.51800 608.21802 08.50109 2.808.21803 08.50110 3.608.2180408.2180508.21806

08.22600 BAKE 4.0 ÷ 8.0 08.22601 08.50112 5.0 08.52600 608.22602 08.50113 7.008.2260308.22604

TESA® IMICRO® with AnalogueIndication – Inch Models


C-9

Centring Devices for TESA® IMICRO®

Optional Accessories for TESA® IMICRO®

and TESA® IMICRO® «capa µ system®»

✓

DIN 863 T4(Form C1)

Extensions for Deep Hole Measurement

mm mm in in

08.40001 6 ÷ 12 100 08.50001 0.275 ÷ 0.50 408.40301 11 ÷ 20 150 08.50301 0.50 ÷ 0.80 608.40302 500 08.50302 2008.41100 20 ÷ 40 150 08.51100 0.80 ÷ 1.6 608.41101 500 08.51101 2008.41102 1000 08.51102 4008.41800 40 ÷100 150 08.51800 1.6 ÷ 4.0 608.41801 500 08.51801 2008.41802 1000 08.51802 4008.42600 100 ÷ 300 150 08.52600 4.0 ÷ 12.0 608.42601 500 08.52601 2008.42602 1000 08.52602 40

mm inCases for single instruments

— 61.60002 3,5 ÷ 6,5 0.1377 ÷ 0.2559– 61.60002 6 ÷ 12 0.275 ÷ 0.5008.60007 61.60002 11 ÷ 20 0.50 ÷ 0.8008.60011 61.60002 20 ÷ 40 0.80 ÷ 1.6008.60015 61.60003 40 ÷ 70 1.60 ÷ 2.8008.60016 61.60003 70 ÷ 100 2.80 ÷ 4.008.63013 08.63013 100 ÷ 150 4.0 ÷ 6.008.63014 08.63014 150 ÷ 200 6.0 ÷ 8.008.63016 08.63016 200 ÷ 300 8.0 ÷ 12.0

Moulded Cases for Single Instruments, Full Sets

and Partial Sets

mm inCases for Cases for full

full sets or partial sets

08.63035 61.60006 3,5 ÷ 6,5 0.1377 ÷ 0.255908.63005 61.60005 6 ÷ 12 0.275 ÷ 0.50008.60008 61.60005 11 ÷ 20 0.500 ÷ 0.80008.60012 61.60006 20 ÷ 40 0.800 ÷ 1.6008.60017 61.60007 40 ÷ 100 1.60 ÷ 4.008.63017 08.63017 100 ÷ 200 4.0 ÷ 8.0

mm08.60001 40 ÷ 10008.62601 100 ÷ 200

✓

✓


C-10


✓

DIN 863 T4.Style C1 for

models 6 to 10 mm or C2 for all other models

0,001 mm 0.00005 in

mm / inconversion

LCD, height ofdigits : 7 mm

Floatingzero

Displaylock

Measuringinserts for

application ranges6 to 10 mm: steelhardened to 30 550 HV

10 to 300: tungsten car-bide tipped ≥ 70 HRC

Opto-coupled RS 232 interface, bidirectional.

3 V lithium battery

1 to 2 a(≈ 2000 h/a)

Automatic shut down

after 10 min. Display setting is retained as longas power supply remainsstable.

10 °C to 40 °C

–10 °C to 60 °C


✓

For the measuring element :

IP54 (IEC 60529) or IP 40 with use of the digital output

≤ 100 mm in aplastic case

> 100 mm in a wood case




TESA® ALESOMETER «capa µ system®» with Digital Display

New patented TESA’s capacitive measuring system

Internal micrometers with 3-line contact. All TESA ALESOMETER are speciallysuited for through and blind bores as well as short centring shoulders, exceptfor the models covering the application ranges from 6 to 10 mm.

mm in µm µm Amm* Bmm Cmm

62.30051 6 ÷ 8 0.2362 ÷ 0.3150 4 4 1,2 3 5562.30052 8 ÷ 10 0.3150 ÷ 0.3970 4 4 1,2 3 5562.30023 10 ÷ 12,5 0.3970 ÷ 0.4921 4 4 0 6,5 6562.30024 12,5 ÷ 15 0.4921 ÷ 0.5905 4 4 0 6,5 6562.30025 15 ÷ 17,5 0.5905 ÷ 0.6890 4 4 0 6,8 6562.30026 17,5 ÷ 20 0.6890 ÷ 0.7874 4 4 0 6,8 9562.30027 20 ÷ 25 0.7874 ÷ 0.9843 4 4 0 8,5 10062.30028 25 ÷ 30 0.9843 ÷ 1.1811 4 4 0 8,5 10062.30029 30 ÷ 35 1.1811 ÷ 1.3780 4 4 0 8,5 10062.30030 35 ÷ 40 1.3780 ÷ 1.5748 4 4 0 8,5 10062.30031 40 ÷ 50 1.5748 ÷ 1.9685 5 5 0 14,5 14062.30032 50 ÷ 60 1.9685 ÷ 2.3622 5 5 0 14,5 14062.30033 60 ÷ 70 2.3622 ÷ 2.7560 5 5 0 14,5 14062.30034 70 ÷ 85 2.7560 ÷ 3.3465 5 5 0 14,5 14062.30035 85 ÷ 100 3.3465 ÷ 3.9370 5 5 0 14,5 14062.30036 100 ÷ 125 3.9370 ÷ 4.9212 6 6 0 30 17562.30037 125 ÷ 150 4.9212 ÷ 5.9055 6 6 0 30 17562.30038 150 ÷ 175 5.9055 ÷ 6.8897 7 7 0 30 17562.30039 175 ÷ 200 6.8897 ÷ 7.8740 7 7 0 30 17562.30040 200 ÷ 225 7.8740 ÷ 8.8582 8 8 0 30 17562.30041 225 ÷ 250 8.8582 ÷ 9.8425 8 8 0 30 17562.30042 250 ÷ 275 9.8425 ÷ 10.8267 8 8 0 30 17562.30043 275 ÷ 300 10.8267 ÷ 11.8110 8 8 0 30 175

Optional Accessories

19.61000 1 Lithium battery - 3 V, 190 mAh, type CR 2032

* Not applicable to the models from 10 mm since the measuring inserts are close to the instrument’s front face.For ordering information on setting rings, see both pages C-13 and C-24. Fore cases, report to page C-11.For connecting cables etc., refer to section L.

A

B

C

Single instruments, complete

C-11


mm mm mm

Partial sets including : Measuring heads Connectors Meas. elements Setting rings

62.30100 6 ÷ 10 08.1720351 6 ÷ 8 08.1620491 62.30020 21.1625101 808.1720353 8 ÷ 10

62.30110 10 ÷ 20 08.1720356 10 ÷ 12,5 08.1620492 62.30020 21.1625102 12,508.1720358 12,5 ÷ 15 21.1625103 17,508.1720360 15 ÷ 17,508.1720362 17,5 ÷ 20

62.30111 20 ÷ 40 08.1720364 20 ÷ 25 08.1620493 62.30020 21.1625104 2508.1720366 25 ÷ 30 21.1625105 3508.1720368 30 ÷ 3508.1720370 35 ÷ 40

62.30112 40 ÷ 100 08.1720372 40 ÷ 50 08.1620494 62.30020 21.1625106 4508.1720374 50 ÷ 60 21.1625107 6008.1720376 60 ÷ 70 21.1625109 8508.1720378 70 ÷ 8508.1720380 85 ÷ 100

TESA® ALESOMETER «capa µ system®»with Digital Display - Partial Sets

New patented TESA’s capacitive measuring system

Models that cover the application ranges from 6 to 10 mm are suited forthrough bores only – All other Alesometer partial sets also permit blind bores as well as short centring shoulders to be inspected.

Extensions for Depth Increase

mm mm

08.1625081 6 ÷ 10 10008.1625082 10 ÷ 20 10008.1625083 20 ÷ 40 15008.1625084 40 ÷100 15008.1625085 100 ÷ 300 200

Cases for Partial Sets

mm

08.1629521 6 ÷ 4008.1629525 40 ÷100

✓

Hardened steel.

Insulated body againsthand warmth.


Declarationof conformity

✓

DIN 863 T4.Style C1 for

models 6 to 10 mm or C2 for all other models

0,001 mm 0.00005 in

Measuringinserts for

application ranges6 to 10 mm: steelhardened to 30 550 HV

10 to 300: tungsten car-bide tipped ≥ 70 HRC

For additionaltechnical data,

see on page C-10.

For setting rings, seeon page C-13.

≤ 100 m in aplastic case,

> 100 mm in a wood case




B

A

C

E

C-12


ROCH ALESOMETER with AnalogueIndication - MetricInternal micrometers with 3-line contact. All ROCH ALESOMETER let youmeasure not only through bores but also blind bores as well as centring shoulders, except for the models covering the application ranges from 6 up to 10 mm.

mm mm µm Amm* Bmm Cmm Emm

08.1725001 6 ÷ 8 0,001 4 1,2 3 54,5 10708.1725003 8 ÷ 10 0,001 4 1,2 3 54,5 10708.1725006 10 ÷ 12,5 0,001 4 0 6,5 64,5 11708.1725008 12,5 ÷ 15 0,001 4 0 6,5 64,5 11708.1725010 15 ÷ 17,5 0,001 4 0 6,8 64,5 11708.1725012 17,5 ÷ 20 0,001 4 0 6,8 64,5 11708.1725014 20 ÷ 25 0,001 4 0 8,5 70 122,508.1725016 25 ÷ 30 0,001 4 0 8,5 70 122,508.1725018 30 ÷ 35 0,001 4 0 8,5 70 122,508.1725020 35 ÷ 40 0,001 4 0 8,5 70 122,508.1725022 40 ÷ 50 0,001 4 0 14,5 108,7 188,708.1725024 50 ÷ 60 0,001 5 0 14,5 108,7 188,708.1725026 60 ÷ 70 0,001 5 0 14,5 108,7 188,708.1725028 70 ÷ 85 0,001 5 0 14,5 126,7 206,708.1725030 85 ÷ 100 0,001 5 0 14,5 126,7 206,708.1725032 100 ÷ 125 0,01 7 0 30 153,7 233,508.1725034 125 ÷ 150 0,01 7 0 30 153,7 233,508.1725036 150 ÷ 175 0,01 8 0 30 153,7 233,508.1725038 175 ÷ 200 0,01 8 0 30 153,7 233,508.1725040 200 ÷ 225 0,01 9 0 30 153,7 233,508.1725042 225 ÷ 250 0,01 9 0 30 153,7 233,508.1725044 250 ÷ 275 0,01 9 0 30 153,7 233,508.1725046 275 ÷ 300 0,01 9 0 30 153,7 233,5

* Not applicable to the models from 10 mm since the measuring inserts are close to the instrument’s front face.

Single Instruments, complete

✓

NF E 11-099.Type 1 for

models 6 to 10 mm or 2 for all other models

Models 6 to100 mm with

vernier reading

Measuring inserts for

application ranges

6 to 10 mm: steel hard-ened to 30 550 HV

10 to 300 mm:tungsten carbide tipped.Hardness : ≥ 70 HRC.

Wood case


Declarationof conformity

Calibrationcertificate

available on request

C-13


mm mm mm mm

Full sets including : Single instrument Setting rings Extensions

08.1725063 6 ÷ 10 08.1725001 6 ÷ 8 21.1625101 8 08.1625081 10008.1725003 8 ÷10

08.1725066 10 ÷ 20 08.1725006 10 ÷ 12,5 21.1625102 12,5 08.1625082 10008.1725008 12,5 ÷ 15 21.1625103 17,508.1725010 15 ÷ 17,508.1725012 17,5 ÷ 20

08.1725068 20 ÷ 40 08.1725014 20 ÷ 25 21.1625104 25 08.1625083 15008.1725016 25 ÷ 30 21.1625105 3508.1725018 30 ÷ 3508.1725020 35 ÷ 40

08.1725070 40 ÷ 100 08.1725022 40 ÷ 50 21.1625106 45 08.1625084 15008.1725024 50 ÷ 60 21.1625107 6008.1725026 60 ÷ 70 21.1625109 8508.1725028 70 ÷ 8508.1725030 85 ÷ 100

08.1725072 100 ÷ 150 08.1725032 100 ÷ 125 25.1625111 125 08.1625085 20008.1725034 125 ÷ 150

ROCH ALESOMETER with AnalogueIndication - Full Metric Sets

ROCH Setting Rings

mm mm

21.1625101 8 21.1625110 9021.1625102 12,5 21.1625111 12521.1625103 17,5 21.1625112 15021.1625104 25 21.1625113 17521.1625105 35 21.1625114 20021.1625106 45 21.1625115 22521.1625107 60 21.1625116 25021.1625108 75 21.1625117 27521.1625109 85

✓

NF E 11-011Type A2

Steel hardenedto 60 HRC

Bore relatedtolerance

± (3 µm + 10 . 10-6 D) µm

D = Nominaldiameter in mm

(1 µm + 5 . 10-6 D) µm

Wood case




✓

NF E 11-099.Type 1 for

models 6 to 10 mm or 2 for all other models

Models 6 to100 mm with

vernier reading

Measuring inserts for

application ranges

6 to 10 mm: hardened steel to 30 550 HV

10 to 300 mm:tungsten carbide tipped.Hardness : ≥ 70 HRC

For additional

data, see on theprevious page

Wood case





C-14

✓

0,001 mm 0.00005 in

LCD, 5,1 mmdigit height

mm / inconversion

Direct or comparative

measurement

Measuringbolts and cone:

tungsten carbide tipped

Max. perm. errorfor models cov-

ering appl. ranges from:

15 to 100 mm or0.6 to 4.0 in : 5 µm

100 to 120 mm or4.0 to 4.8 in : 6 µm

Repeatability-limit : 3 µm

Interface:RS 232

compatible

2 batteriesSR 44, 1,55 V,

155 to 190 mAh

≈ 4300 h


≈ 10 min. Display settingis retained as long aspower supply remains stable.

10 °C to 40 °C

–10 °C to 60 °C

80 %,with nocondensation

Measuring element (IEC 60529) :IP 51

✓


with 2 batteries




TESA® TRIOMATIC®

For single-handed measurement with a constant measuring force. No ratchet.Self-centring and self-aligning bore gauges owing to the measuring bolts thatprovide three line contact with the bore to be inspected. Automatic value stor-age, numerical display and value classification.Measure through holes and blind bores as well as short centring shoulders.For information on measuring bolts for internal threads and other special profiles, report to TESA Tri-O-Bor.

mm in Amm Bmm Cmm62.30005 15 ÷ 20 62.32005 0.6 ÷ 0.8 6 56 20662.30006 20 ÷ 25 62.32006 0.8 ÷ 1.0 6 56 20662.30007 25 ÷ 30 62.32007 1.0 ÷ 1.2 6 56 20662.30008 30 ÷ 40 62.32008 1.2 ÷ 1.6 10 60 21062.30009 40 ÷ 50 62.32009 1.6 ÷ 2.0 10 60 21062.30010 50 ÷ 60 62.32010 2.0 ÷ 2.4 10 60 21062.30011 60 ÷ 70 62.32011 2.4 ÷ 2.8 18 68 21862.30012 70 ÷ 80 62.32012 2.8 ÷ 3.2 18 68 21862.30013 80 ÷ 90 62.32013 3.2 ÷ 3.6 18 68 21862.30014 90 ÷ 100 62.32014 3.6 ÷ 4.0 18 68 21862.30015 100 ÷ 110 62.32015 4.0 ÷ 4.4 18 68 21862.30016 110 ÷ 120 62.32016 4.4 ÷ 4.8 18 68 218

A

C

B

Internal Measuring Instruments – Electronic

C-15

mm mm mm mmPartial sets including : Measuring Measuring heads, Setting rings

element complete

62.30001 15 ÷ 30 62.30000 09.10101 15 ÷ 20 08.40104 1509.10102 20 ÷ 25 08.40106 2509.10103 25 ÷ 30

62.30002 30 ÷ 60 62.30000 09.10501 30 ÷ 40 08.40107 3509.10502 40 ÷ 50 08.40108 5009.10503 50 ÷ 60

Partial sets including : Measuring Measuring Measuring Setting

element head bolts rings

62.30003 60 ÷ 90 62.30000 09.10801 60 ÷ 90 09.11001 60 ÷ 70 08.40109 7009.11002 70 ÷ 80 08.40110 9009.11003 80 ÷ 90

62.30004 90 ÷ 120 62.30000 09.11201 90 ÷ 120 09.11401 90 ÷ 100 08.40110 9009.11402 100 ÷ 110 08.40111 11009.11403 110 ÷ 120

TESA® TRIOMATIC® Metric Partial Sets

✓

Technical data:see on previous

page C-10



with 2 batteries



TESA® TRIOMATIC® Optional Accessories

✓05.60030 Set of 2 batteries, type SR 4409.60009 Extension for depth increase by 100 mm09.60010 Holder for stationary use

of TESA TRIOMATIC01.60201 Micrometer stand for 09.60010

For information on cables, see section L.


C-16

✓


page C-10



with 2 batteries



in in in inPartial sets including : Measuring Measuring heads, Setting

element complete rings

62.32001 0.6 ÷ 1.2 62.32000 09.20101 0.6 ÷ 0.8 08.50104 0.609.20102 0.8 ÷ 1.0 08.50106 1.009.20103 1.0 ÷ 1.2

62.32002 1.2 ÷ 2.4 62.32000 09.20501 1.2 ÷ 1.6 08.50107 1.409.20502 1.6 ÷ 2.0 08.50108 2.009.20503 2.0 ÷ 2.4



62.32003 2.4 ÷ 3.6 62.32000 09.20801 2.4 ÷ 3.6 09.31001 2.4 ÷ 2.8 08.50109 2.809.31002 2.8 ÷ 3.2 08.50110 3.609.31003 3.2 ÷ 3.6

62.32004 3.6 ÷ 4.8 62.32000 09.21201 3.6 ÷ 4.8 09.31401 3.6 ÷ 4.0 08.50110 3.609.31402 4.0 ÷ 4.4 08.50111 4.409.31403 4.4 ÷ 4.8

TESA® TRIOMATIC® Inch Partial Sets

mm inSingle instuments Partial sets

09.60011 09.60017 15 ÷ 30 0.6 ÷ 1.209.60012 09.60017 30 ÷ 60 1.2 ÷ 2.409.60015 09.60017 60 ÷ 90 2.4 ÷ 3.609.60016 09.60018 90 ÷ 120 3.6 ÷ 4.8

Plastic Cases or Suitcases for TESA® TRIOMATIC®

✓


C-17


TESA® TRI-O-BOR®

Self-centring and self-aligning internal micrometers with 3-line contact with the part being inspected. These measuring instruments are specially suited for trough holes, but also for blind bores or short centring shoulders.

mm in Amm Bmm Cmm09.10005 15 ÷ 20 09.20005 0.6 ÷ 0.8 6 ≥ 66 ≤ 13209.10006 20 ÷ 25 09.20006 0.8 ÷ 1.0 6 ≥ 66 ≤ 13209.10007 25 ÷ 30 09.20007 1.0 ÷ 1.2 6 ≥ 66 ≤ 13209.10405 30 ÷ 40 09.20405 1.2 ÷ 1.6 10 ≥ 70 ≤ 13809.10406 40 ÷ 50 09.20406 1.6 ÷ 2.0 10 ≥ 70 ≤ 13809.10407 50 ÷ 60 09.20407 2.0 ÷ 2.4 10 ≥ 70 ≤ 13809.10705 60 ÷ 70 09.20705 2.4 ÷ 2.8 18 ≥ 78 ≤ 14709.10706 70 ÷ 80 09.20706 2.8 ÷ 3.2 18 ≥ 78 ≤ 14709.10707 80 ÷ 90 09.20707 3.2 ÷ 3.6 18 ≥ 78 ≤ 14709.11105 90 ÷ 100 09.21105 3.6 ÷ 4.0 18 ≥ 78 ≤ 14709.11106 100 ÷ 110 09.21106 4.0 ÷ 4.4 18 ≥ 78 ≤ 14709.11107 110 ÷ 120 09.21107 4.4 ÷ 4.8 18 ≥ 78 ≤ 147

✓


NF E 11-099

0,002 mm or 0.0002 in

0,01 mm or 0.001 in

Measuringbolts and cone:

tungsten carbide tipped


ering appl. ranges from:

15 to 60 mm or 0.6 to 2.4 in : 3 µm

60 to 90 mm or2.4 to 3.6 in : 4 µm

90 to 120 mm or3.6 to 4.8 in : 5 µm

Repeatability limit for models

covering the applicationranges from:

15 to 60 mm or 0.6 to 2.4 in : 4 µm

60 to 90 mm or2.4 to 3.6 in : 5 µm

90 to 120 mm / 3.6 to 4.8 in : 6 µm

Supplied with 1 heat insulating

sleeve No. 09.40020,2 keys No. 09.40001, 1 screwdriver No. 08.62801

Shipping box




Special Measuring BoltsUsed for Metric ISO threads (M16x0,5 ÷ M150x6), Unified Inch threads UN,UNC or UNF (60°) and Whitworth threads (55°). Measuring bolts with specialprofiles can also be made available. Both the size and type of the thread orthe workpiece to be measured must be specified in your inquiries or purchaseorders (see drawings).

B

A

C

D

e

P

d1

d2

Dd

R

l L

Dd

R

L

C-18


✓


page C-13


Supplied with 1 extension for

depth increase (150 mm) No. 09.400001 heat insulating sleeveNo. 09.40020,2 keys No. 09.40001, 1 screwdriver No. 08.62801




mm mm mm mmPartial sets including : Measuring Measuring heads, Setting rings

element complete

09.10302 15 ÷ 30 09.10201 09.10101 15 ÷ 20 08.40104 1509.10102 20 ÷ 25 08.40106 2509.10103 25 ÷ 30

09.10602 30 ÷ 60 09.10201 09.10501 30 ÷ 40 08.40107 3509.10502 40 ÷ 50 08.40108 5009.10503 50 ÷ 60

Partial sets including Measuring Measuring head Measuring bolts Setting rings

element

09.10902 60 ÷ 90 09.10802 09.10801 60 ÷ 90 09.11001 60 ÷ 70 08.40109 7009.11002 70 ÷ 80 08.40110 9009.11003 80 ÷ 90

09.11302 90 ÷ 120 09.10802 09.11201 90 ÷ 120 09.11401 90 ÷ 100 08.40110 9009.11402 100 ÷ 110 08.40111 11009.11403 110 ÷ 120

TESA® TRI-O-BOR® Metric Partial Sets

Extension for Deep Hole Measurement

mm09.40000 150

TESA® TRI-O-BOR® Optional Accessory

✓

C-19

in in in in

Partial sets including : Measuring Measuring heads, Setting

element complete rings

09.20300 0.6 ÷ 1.2 09.20201 09.20101 0.6 ÷ 0.8 08.50104 0.609.20102 0.8 ÷ 1.0 08.50106 1.009.20103 1.0 ÷ 1.2

09.20600 1.2 ÷ 2.4 09.20201 09.20501 1.2 ÷ 1.6 08.50107 1.409.20502 1.6 ÷ 2.0 08.50108 2.009.20503 2.0 ÷ 2.4



09.20900 2.4 ÷ 3.6 09.20802 09.20801 2.4 ÷ 3.6 09.31001 2.4 ÷ 2.8 08.50109 2.809.31002 2.8 ÷ 3.2 08.50110 3.609.31003 3.2 ÷ 3.6

09.21300 3.6 ÷ 4.8 09.20802 09.21201 3.6 ÷ 4.8 09.31401 3.6 ÷ 4.0 08.50110 3.609.31402 4.0 ÷ 4.4 08.50111 4.409.31403 4.4 ÷ 4.8

TESA® TRI-O-BOR® Inch Partial Sets

Plastic Cases or Suitcases for TESA® TRI-O-BOR®

mm inSingle instruments Partial sets Full sets

09.60023 09.60024 09.60024 15 ÷ 30 0.6 ÷ 1.209.60025 09.60026 09.60026 30 ÷ 60 1.2 ÷ 2.409.60027 09.60028 09.60028 60 ÷ 90 2.4 ÷ 3.609.60004 09.60004 09.60008 90 ÷ 120 3.6 ÷ 4.8

✓

✓

Technical data:see on page

C-13








C-20

mm mm mm mm

Full sets including : Single instruments Setting rings Extension

09.10004 BSC 15 ÷ 30 09.10005 15 ÷ 20 08.40104 15 09.40000 15009.10006 20 ÷ 25 08.40105 2509.10007 25 ÷ 30

09.10404 BSD 30 ÷ 60 09.10405 30 ÷ 40 08.40107 35 09.40000 15009.10406 40 ÷ 50 08.40108 5009.10407 50 ÷ 60

09.10704 BSF 60 ÷ 90 09.10705 60 ÷ 70 08.40109 70 09.40000 15009.10706 70 ÷ 80 08.40110 9009.10707 80 ÷ 90

09.11104 BSG 90 ÷ 120 09.11105 90 ÷ 100 08.40110 90 09.40000 15009.11106 100 ÷ 110 08.40111 11009.11107 110 ÷ 120

TESA® TRI-O-BOR® in Full Sets

in in in mm

Full sets including : Single instruments Setting rings Extension

09.20004 BSCE 0.6 ÷ 1.2 09.20005 0.6 ÷ 0.8 08.50104 0.6 09.40000 15009.20006 0.8 ÷ 1.0 08.50105 1.009.20007 1.0 ÷ 1.2

09.20404 BSDE 1.2 ÷ 2.4 09.20405 1.2 ÷ 1.6 08.50107 1.4 09.40000 15009.20406 1.6 ÷ 2.0 08.50108 2.009.20407 2.0 ÷ 2.4

09.20704 BSFE 2.4 ÷ 3.6 09.20705 2.4 ÷ 2.8 08.50109 2.8 09.40000 15009.20706 2.8 ÷ 3.2 08.50110 3.609.20707 3.2 ÷ 3.6

09.21104 BSGE 3.6 ÷ 4.8 09.21105 3.6 ÷ 4.0 08.50110 3.6 09.40000 15009.21106 4.0 ÷ 4.4 08.50111 4.409.21107 4.4 ÷ 4.8

✓

Technical data:see on page

C-13








Innenmessschrauben

C-21


ETALON® INTALOMETER 531Measure through holes and blind bores as well as short centring shoulders.All models covering the application ranges up to 100 mm have slanted measuring bolts that extend beyond the front face of the measuring head.

mm in Amm Bmm Cmm78.112356 5 ÷ 6 78.112374 0.188 ÷ 0.238 2 x 180° 3 ≥ 32 ≤ 10978.112357 6 ÷ 7 78.112375 0.233 ÷ 0.278 2 x 180° 3 ≥ 33 ≤ 11178.112358 7 ÷ 8,5 78.112376 0.272 ÷ 0.338 2 x 180° 4 ≥ 60 ≤ 13078.112359 8,5 ÷ 10 78.112377 0.332 ÷ 0.402 2 x 180° 4 ≥ 72 ≤ 13378.112360 10 ÷ 12,5 78.112378 0.396 ÷ 0.502 3 x 120° 3 ≥ 60 ≤ 11878.112361 12,5 ÷ 15 78.112379 0.496 ÷ 0.602 3 x 120° 3 ≥ 63 ≤ 12078.112362 15 ÷ 17,5 78.112380 0.596 ÷ 0.704 3 x 120° 3 ≥ 65 ≤ 12278.112363 17,5 ÷ 20 78.112381 0.696 ÷ 0.804 3 x 120° 3 ≥ 68 ≤ 12578.112364 20 ÷ 25 78.112382 0.794 ÷ 1.004 90°–135°–135° 7 ≥ 75 ≤ 13278.112365 25 ÷ 30 78.112383 0.994 ÷ 1.204 90°–135°–135° 7 ≥ 80 ≤ 13878.112366 30 ÷ 35 78.112384 1.194 ÷ 1.404 90°–135°–135° 7 ≥ 90 ≤ 14278.112367 35 ÷ 40 78.112385 1.394 ÷ 1.604 90°–135°–135° 7 ≥ 90 ≤ 14878.112368 40 ÷ 45 78.112386 1.595 ÷ 1.805 90°–135°–135° 10,5 ≥ 110 ≤ 16778.112369 45 ÷ 50 78.112387 1.795 ÷ 2.005 90°–135°–135° 10,5 ≥ 113 ≤ 17078.112370 50 ÷ 60 78.112388 1.995 ÷ 2.405 90°–135°–135° 15 ≥ 123 ≤ 18778.112371 60 ÷ 70 78.112389 2.395 ÷ 2.805 90°–135°–135° 15 ≥ 130 ≤ 19378.112372 70 ÷ 85 78.112390 2.795 ÷ 3.405 90°–135°–135° 15 ≥ 145 ≤ 21378.112373 85 ÷ 100 78.112391 3.395 ÷ 4.005 90°–135°–135° 15 ≥ 155 ≤ 22478.110733 100 ÷ 125 78.111174 4 ÷ 5 3 x 120° 27 ≥ 105 ≤ 19478.110735 125 ÷ 150 78.111176 5 ÷ 6 3 x 120° 27 ≥ 105 ≤ 19478.110737 150 ÷ 175 3 x 120° 27 ≥ 105 ≤ 19478.110739 175 ÷ 200 3 x 120° 27 ≥ 105 ≤ 19478.110741 200 ÷ 225 3 x 120° 27 ≥ 105 ≤ 19478.110743 225 ÷ 250 3 x 120° 27 ≥ 105 ≤ 19478.110745 250 ÷ 275 3 x 120° 27 ≥ 105 ≤ 19478.110747 275 ÷ 300 3 x 120° 27 ≥ 105 ≤ 194

✓

Models from10 to 100 mm:

DIN 863 T4 (style C2)NF E 11-099

Models from5 to 100 mm:

0,002 mm or 0.0001 in, with vernier reading

100 to 300 mm:0,01 mm or 0.001 in

Measuring boltson models from

5 to 100 mm:hardened steel

100 to 300 mm:tungsten carbide tipped


ering appl. ranges from

5 to 40 mm or0.188 to 1.604 in : 2 µm

40 to 100 mm or1.394 to 4.005 in : 3 µm

100 to 300 mm or4 to 6 in : 5 µm

Repeatabilitylimit for models

covering the applicationranges from:

5 to 40 mm or0.188 to 1.604 in : 3 µm

40 to 100 mm or1.394 to 4.005 in : 4 µm

100 to 300 mm or4 to 6 in : 5 µm





30

35

40

25

B

C

A

C-22


✓

For technical data,

see on page C-17


Plastic case or suitcase



ETALON® INTALOMETER 531 – Metric Sets

mm mm mm mm mmFull sets Including :

Single instruments Extensions Setting rings

78.110592 5 ÷ 10 78.112356 5 ÷ 6 78.103613 100 08.40114 678.112357 6 ÷ 7 08.40115 8,578.112358 7 ÷ 8,578.112359 8,5 ÷ 10

78.110594 10 ÷ 20 78.112360 10 ÷ 12,5 78.103621 150 08.40116 12,578.112361 12,5 ÷ 15 08.40117 17,578.112362 15 ÷ 17,578.112363 17,5 ÷ 20

78.110596 20 ÷ 40 78.112364 20 ÷ 25 78.103624 150 08.40106 2578.112365 25 ÷ 30 08.40107 3578.112366 30 ÷ 3578.112367 35 ÷ 40

78.110598 40 ÷ 100 78.112368 40 ÷ 45 78.104940 150 08.43230 4578.112369 45 ÷ 50 08.43239 6078.112370 50 ÷ 60 08.40118 8578.112371 60 ÷ 7078.112372 70 ÷ 8578.112373 85 ÷ 100

Full sets includin g: Single Measuring instruments bolts Extensions

78.110749 100 ÷ 150 78.110733 78.111003* 100 ÷ 125 78.104940 15078.111004 125 ÷ 150

78.110751 150 ÷ 300 78.110737 78.111005* 150 ÷ 175 78.104940 15078.111006 175 ÷ 20078.111007 200 ÷ 22578.111008 225 ÷ 25078.111009 250 ÷ 27578.111010 275 ÷ 300

* One set of measuring bolts is provided with the single instrument No. 78.110733 or 78.110737.

Innenmessschrauben

C-23


ETALON® INTALOMETER 531 – Inch Sets

in in in mm inFull sets Including :

Single instruments Extension Setting rings

78.110600 0.188 ÷ 0.402 78.112374 0.188 ÷ 0.238 78.103613 100 08.50100 0.20078.112375 0.233 ÷ 0.278 08.50114 0.25078.112376 0.272 ÷ 0.388 08.50115 0.30078.112377 0.332 ÷ 0.402 08.50101 0.350

78.110602 0.396 ÷ 0.804 78.112378 0.396 ÷ 0.502 78.103621 150 08.50103 0.50078.112379 0.496 ÷ 0.602 08.50105 0.70078.112380 0.596 ÷ 0.70478.112381 0.696 ÷ 0.804

78.110604 0.794 ÷ 1.604 78.112382 0.794 ÷ 1.004 78.103624 150 08.50106 1.00078.112383 0.994 ÷ 1.204 08.50107 1.40078.112384 1.194 ÷ 1.40478.112385 1.394 ÷ 1.604

78.110606 1.595 ÷ 4.005 78.112386 1.595 ÷ 1.805 78.104940 150 08.50116 1.80078.112387 1.795 ÷ 2.005 08.50118 2.40078.112388 1.995 ÷ 2.405 08.50117 3.40078.112389 2.395 ÷ 2.80578.112390 2.795 ÷ 3.40578.112391 3.395 ÷ 4.005

Partial set including : Single instr. Measuring bolts Extension

78.111179 4 ÷ 6 78.111174 78.111011* 4 ÷ 5 78.104940 15078.111012 5 ÷ 6

* One set of measuring bolts is provided with the single instrument No. 78.111174.

✓

For technical data,

see on page C-17


Plastic case or suitcase



C-24

TESA® Setting Rings and Setting Master

✓

Shippingpacking


mm in µm* µm**Setting rings

08.43200 4 1,5 1,508.43201 5,5 08.50100 0.200 1,5 1,508.40114 6 08.50114 0.250 1,5 1,508.40101 8 08.50115 0.300 1,5 1,508.40115 8,5 08.50101 0.350 1,5 1,508.40102 10 08.50102 0.425 1,5 1,508.40103 11 1,5 1,508.40116 12,5 08.50103 0.500 1,5 1,508.40104 15 08.50104 0.600 1,5 1,508.40105 17 08.50105 0.700 1,5 1,508.40117 17,5 1,5 1,508.40106 25 08.50106 1.000 1,5 1,508.40107 35 08.50107 1.400 2 208.43230 45 08.50116 1.800 2 208.40108 50 08.50108 2.000 2 208.43239 60 08.50118 2.400 2 208.40109 70 08.50109 2.800 2 208.40118 85 08.50117 3.400 2 208.40110 90 08.50110 3.600 2 208.40111 110 08.50111 4.400 2,5 2,508.40112 125 08.50112 5.000 2,5 2,508.40113 175 08.50113 7.000 2,5 4

Setting master

08.43101 225 and 275 08.53101 9 and 11 — 6

* Without taking a rim of 1 mm into account.

** Dimension is determined through a 2-point measurement taken at mid-height of the setting ring. Measuringdirection is marked with 2 strokes. Actual dimensions measured are engraved on the setting master.

Setting Standards

internal measurement - tesatool.comtesatool.com/pdf_files/catalog_internal.pdf · c-2 internal...

Documents