internal tool - missouricarbide.com · internal tool internal tool inc. alphabetical index boring...

INTERNAL TOOL

INTERNAL TOOL INC.

ALPHABETICAL INDEX

BORING TOOLSALUMINUM CUTTING BORING TOOLS - 1212121212BORE AND BACK CHAMFER TOOLS - 1313131313DOUBLE EDGE BORING TOOLS - 1313131313MAX-BORE ALTIN COATED - 1010101010MULTI REACH BORING TOOLS - 1111111111PLASTIC CUTTING BORING TOOLS - 1111111111QUICK CHANGE BORING TOOLS - 1212121212STANDARD BORING BAR - 8-98-98-98-98-9

COMBINATION TOOLSBORE AND GROOVE TOOLS - 1414141414BORE AND THREAD TOOLS - 1414141414DRILL AND BORING TOOLS - 1313131313THREAD AND GROOVE TOOLS - 2626262626

DOVETAIL CUTTERSO-RING DOVETAIL CUTTERS - 9292929292STANDARD DOVETAIL CUTTERS - 92-9592-9592-9592-9592-95DOVETAILCUTTER WITH A TIP RADIUS - 92-9592-9592-9592-9592-95

BACKSPOT FACERSCNC BACKSPOT FACER - 6060606060

DRILLSCARBIDE CENTER DRILLS - 5353535353CARBIDE COUNTERSINKS - 4747474747DRILL MILLS - 5050505050SPADE DRILLS - 5353535353SPOTTING DRILLS - 5353535353

ENDMILLSBACK DRAFT CUTTERS - 5555555555BACK DRAFT CUTTERS WITH RADIUS - 5555555555CARBIDE ENDMILLS - 5757575757CARBIDE REAMER - 104104104104104CHAMFER MILLS 2 OR 4 FLUTE, LONG OR SHORT, SINGLE OR DOUBLE - 62-6562-6562-6562-6562-65CORNER ROUNDING ENDMILLS - 66-6766-6766-6766-6766-67MICRO 2 FLUTE ENDMILLS - 5656565656MICRO ENDMILLS - 5757575757N/C COUNTERBORE - 105105105105105SMALL CARBIDE STUB TAPERED ENDMILLS - 5454545454STANDARD TAPERED CARBIDE ENDMILLS - 5454545454HIGH PERFORMANCE ENDMILLS - 108-109108-109108-109108-109108-109

ENGRAVING TOOLSCHISEL STYLE ENGRAVING TOOLS - 5959595959DOUBLE END ENGRAVING TOOLS - 5858585858EXTRA LONG ENGRAVING TOOLS - 5858585858FINE POINT ENGRAVING TOOLS - 5858585858RADIUS TIP ENGRAVING TOOLS - 5959595959SOFT MATERIAL ENGRAVING TOOLS - 5858585858SPIRAL FLUTE ENGRAVING TOOLS - 5959595959STANDARD ENGRAVING TOOLS - 5858585858TWO FLUTE ENGRAVING TOOLS - 5959595959

INSERT BARS11° DIAMOND BORING INSERT - 20-2120-2120-2120-2120-217° DIAMOND BORING BARS - 18-1918-1918-1918-1918-19DIAMOND BORING INSERT - 18-1918-1918-1918-1918-19GROOVING INSERT BARS - 3636363636GROOVING INSERTS - 3636363636INSERT BAR REPLACEMENT HEADS - 3737373737THREADING INSERT - 44-4644-4644-4644-4644-46THREADING INSERT BARS - 44-4644-4644-4644-4644-46TRIANGLE BORING BARS - 15-1715-1715-1715-1715-17TRIANGLE BORING INSERT - 15-1715-1715-1715-1715-17

KEYWAY CUTTERSCARBIDE HEAD 3/8" STEEL SHANK KEY CUTTERS - 8484848484CARBIDE HEAD KEY CUTTER W/ CORNER RADIUS - 8787878787CARBIDE HEAD STEEL SHANK KEY CUTTERS - 76-7976-7976-7976-7976-79DEEP SLOTTING KEYWAY CUTTERS SOLID CARBIDE - 7575757575FINE TOOTH CARBIDE HEAD KEY CUTTERS - 8181818181FULL RADIUS CARBIDE HEAD KEY CUTTERS - 8585858585FULL RADIUS SOLID CARBIDE KEY CUTTERS - 8585858585LARGE DIA KEYWAY CUTTERS CARBIDE HEAD - 8282828282METRIC HEAD STEEL SHANK KEY CUTTERS - 8080808080RETAINING RING CARBIDE KEY CUTTERS - 8383838383SOFT MATERIAL CARBIDE HEAD KEY CUTTERS - 7171717171SOFT MATERIAL SOLID CARBIDE KEY CUTTERS - 7070707070SOLID CARBIDE KEY CUTTER W/ CORNER RADIUS - 8686868686SOLID CARBIDE KEY CUTTERS - 72-7372-7372-7372-7372-73SOLID CARBIDE KEY CUTTERS 1/4" SHANK - 8484848484SOLID CARBIDE KEY CUTTERS LONG REACH - 7474747474SOLID CARBIDE KEY CUTTERS LONG SHANK - 8383838383STAGGERED TOOTH CARBIDE HEAD KEY CUTTERS - 8888888888

MOLD CUTTERSDIE SINKERS - 4747474747RUNNER CUTTER - 4747474747

THREADING TOOLSACME THREADING TOOLS - 4141414141BUTTRESS THREADING TOOLS - 4343434343EXTERNAL ACME THREADING TOOLS - 4141414141EXTERNAL STUB ACME THREADING TOOLS - 4141414141EXTERNAL THREAD/CHAMFER TOOLS - 3535353535LEFT HAND THREADING TOOLS - 4040404040METRIC THREADING TOOLS - 4343434343MULTI REACH THREADING TOOLS - 4242424242QUICK CHANGE THREADING TOOLS - 4242424242STANDARD THREADING TOOLS - 4040404040STUB ACME THREADING TOOLS - 4141414141

PROFILING TOOLSFINE POINT PROFILE TOOLS - 48-4948-4948-4948-4948-49L.H. OFFSET PROFILE TOOLS - 48-4948-4948-4948-4948-49MULTI REACH PROFILING TOOLS - 4848484848QUICK CHANGE PROFILING TOOLS - 4343434343R.H. OFFSET PROFILE TOOL - 48-4948-4948-4948-4948-49REVERSE PROFILE TOOLS - 48-4948-4948-4948-4948-49STANDARD PROFILE TOOLS - 48-4948-4948-4948-4948-49

SPECIALTY CUTTERSACME THREAD MILLS - 102-103102-103102-103102-103102-103ANGLERS - 9090909090CONCAVE RADIUS KEY CUTTERS - 9090909090DOUBLE ANGLE CUTTER - 98-9998-9998-9998-9998-99DOUBLE CHAMFER CUTTERS - 6161616161DOUBLE CONCAVE RADIUS CUTTERS - 9090909090EDGE BREAKERS - 6060606060MINI THREADMILLS - 100100100100100MULTI THREAD MILLS ALTIN COATED - 101101101101101REVERSE CORNER ROUNDING TOOLS - 6161616161SINGLE ANGLE CUTTER - 8383838383STUB ACME THREAD MILLS - 4141414141THREADMILLS - 100100100100100UNDERCUTTING ENDMILLS/LOLLI POP CUTTERS - 9797979797EXTERNAL ACME / STUB ACME THREAD MILLS - 102102102102102INTERNAL ACME / STUB ACME THREAD MILLS - 103103103103103

GROOVING TOOLSDEEP SLOTTING GROOVING TOOLS - 3232323232DEEP SLOTTING FULL RADIUS GROOVE TOOLS - 3333333333EXTERNAL GROOVING TOOLS - 3535353535FACE GROOVING TOOLS - 3939393939FULL RADIUS GROOVING TOOLS - 24-2524-2524-2524-2524-25I.D. CHAMFER TOOLS - 3535353535LONG LENGTH SINGLE END SPLIT BLANKS - 3838383838MAX-GROOVE ALTIN COATED - 28-2928-2928-2928-2928-29METRIC GROOVING TOOLS - 2727272727MULTI REACH GROOVING TOOLS - 2626262626O-RING DOVETAIL GROOVERS - 2727272727O-RING GROOVE TOOLS - 2626262626QUICK CHANGE GROOVING TOOLS - 30-3130-3130-3130-3130-31STANDARD GROOVING TOOLS - 22-2322-2322-2322-2322-23THREAD RELIEF TOOLS - 4242424242

HOLDERS/BUSHINGS/MISCDOUBLE END SPLIT BLANKS - 3838383838EXTERNAL BAR HOLDER - 3535353535FACE GROOVE TOOL HOLDER - 3939393939QUICK CHANGE HOLDER - 1212121212REPLACEMENT SCREW - 3737373737SINGLE END SPLIT BLANKS - 3838383838SPLIT BUSHING - 3838383838TOOL HOLDER - 1414141414

http://missouricarbide.com/

HP USER

Text Box

Missouri Carbide Inc 13965 Lawrence 2143 Mt. Vernon, MO 65712 Ph: (800) 430-3101 | Fax: (417) 471-1037 missouricarbide.com | email: [email protected]

INTERNAL TOOL INC.

INTERNAL TOOL

SERIES PAGE #04...MULTI REACH BORING BAR.................1106...MULTI REACH GROOVER.....................2608...MULTI REACH THREADER....................4209...MULTI REACH PROFILER.....................4810...STANDARD BORING TOOL...................8-912...CPGT INSERT BORING BAR.................20-2114...TPGT INSERT BORING BAR.................15-1715...TPGT INSERTS......................................15-1716...CCGT INSERT BORING BAR.................18-1917...CCGT INSERTS......................................18-1918...MAX BORE TOOL...................................1019...ALUMINUM BORING TOOLS.................1220...STANDARD GROOVING TOOLS...........22-2320...METRIC GROOVING TOOLS.................2721...MICRO ENDMILLS..................................5622...MAX GROOVE TOOLS...........................28-2923...LARGE DIAMETER KEY CUTTER..........8224...FULL RADIUS GROOVE TOOL..............24-2526...INSERT GROOVE TOOL........................3627...O'RING GROOVE TOOL........................2629...LOLLIPOP CUTTERS...............................9730...THREADING TOOLS..............................4030...METRIC THREADING TOOLS................4331...L.H. THREADING TOOLS.......................4032...ACME THREADING TOOLS...................4133...EXTERNAL ACME TOOLS....................4134...STUB ACME THREAD TOOLS...............4135...EXTERNAL ACME/STUB THREAD MILLS.10236...INSERT THREAD TOOLS.......................44-4637...THREADING INSERTS............................44-4638...BUTTRESS THREAD TOOLS..................4339...EXTERNAL GROOVE TOOLS.................3540...REPLACEMENT HEADS............................3741....CARBIDE ENDMILLS.............................5742...QUICK CHANGE BORE TOOLS............1242...QUICK CHANGE FACE GROOVE...........3942...QUICK CHANGE GROOVE.....................30-3142...QUICK CHANGE THREAD......................4242...QUICK CHANGE PROFILE.....................4343...I.D. CHAMFER TOOLS...........................3545...BACK-DRAFT CUTTER..........................5546...THREAD RELIEF TOOLS.......................4248...BORE & GROOVE TOOLS.....................1449...DRILL MILLS..........................................50-5150...BORE & THREAD TOOLS......................1451...O'RING DOVETAIL CUTTERS................9152...THREAD & GROOVE TOOLS.................2653...LATHE O'RING TOOLS...........................2754...DOUBLE EDGE BORE............................1355...BORE & BACK CHAMFER......................1356...PROFILE TOOLS....................................48-4957...DEEP SLOTTING KEY CUTTER.............7558...SPADE DRILLS........................................5359...DRILL & BORE TOOL.............................1360...DIE SINKER.............................................47

CATALOG 2016 SERIES INDEX SERIES PAGE #61...RUNNER CUTTERS...........................................4762...ENGRAVING TOOLS..........................................58-5963...COUNTERSINKS................................................4764...CHAMFERMILLS................................................62-6565...EDGE BREAKERS..............................................6066...CNC BACK-SPOT FACER..................................6067...REVERSE CORNER ROUNDERS......................6168...CORNER ROUNDERS.......................................66-6769...STUB TAPERED ENDMILLS..............................5469...TAPERED ENDMILLS........................................5470...SPLIT BLANKS..................................................3871...CENTER DRILLS...............................................5372...DOUBLE CHAMFER CUTTERS.........................6173...FACE GROOVERS.............................................3974...LONG KEY CUTTERS........................................8375...SPOTTING DRILLS............................................5376... ALUM-CUT KEY CUTTER.................................7076...SOLID CARBIDE KEY CUTTERS.......................72-7376...1/4" SHANK KEY CUTTERS...............................8477...RETAINING RING KEY CUTTERS.....................8378...ALUM-CUT KEY CUTTERS................................7178...CARBIDE HEAD KEY CUTTERS........................76-7978...3/8" SHANK KEY CUTTERS...............................8479...METRIC KEY CUTTERS....................................8080...FULL RADIUS KEY CUTTERS...........................8581...ANGLERS..........................................................9082...CONCAVE RADIUS KEY CUTTER.....................9083...LONG REACH KEY CUTTER.............................7484...DBL CONCAVE KEY CUTTER...........................9085...N/C COUNTER BORES......................................10586...DOVETAIL CUTTERS........................................92-9588...THREADMILLS..................................................10089...MULTI THREAD MILLS......................................10190...SINGLE ANGLE CUTTERS................................8391...BORING BARS FOR PLASTIC...........................1192...DOUBLE ANGLE CUTTERS..............................98-9993...CARBIDE REAMERS.........................................10494...SPLIT BUSHINGS..............................................3898...TOOL HOLDER.................................................1499...REPLACEMENT SCREWS...................................37101...SOLID RADIUS KEY CUTTER.........................86102...RADIUS KEY CUTTER.....................................87103...STAGGER TOOTH KEY CUTTER...................88106...PUSH-PULL CUTTERS....................................91107...FINE TOOTH KEY CUTTER............................81108...PCD-CBN BORING TOOLS.............................11112...HIGH/PERF ROUGHING ENDMILLS...............108116...HIGH/PERF BALL ENDMILLS..........................108121...DEEP SLOTTING GROOVING TOOLS............32123...DEEP SLOTTING FULL RADIUS GROOVE TOOLS..33126...HIGH/PERF ALUM CUTTING ENDMILLS........109135...ACME/STUB INTERNAL THREAD MILLS.......103136...HIGH/PERF ENDMILL......................................106-107168...MAX ROUNDERS..............................................68170.LONG REACH CORNER COUNDERS................66

CA

TALO

G T

WEN

TY T

WEL

VE

INTERNAL TOOL INC.

ITI Carbide Cutting Tools 1

PRODUCT INDEX

SERIES 10 Standard Boring Tool SERIES 18 ALTIN Coated Max-Bore

APPLICATION :BORING ALL TYPES OF MATERIALS page 8-9 page 10

APPLICATION :BORING TOUGH TO MACHINEMATERIALS. STAINLESS ETC.

SERIES 04 Multi-Reach Boring Tools

APPLICATION :DEEP HOLE BORING page 11

SPECIALIZING IN UNIQUE AND HARD TO FIND CUTTING TOOLS

page 13APPLICATION : DRILL,BORE & TURN WITH THE SAME TOOL

SERIES 54 Double Edge Bore Tools

page 12APPLICATION :BORING ALL TYPES OF MATERIALS

SERIES 42 Quick Change Boring Tool

page 13

SERIES 55 Bore & Back ChamferTools

APPLICATION : BORE & BACK CHAMFERWITH THE SAME TOOL

SERIES 42 Quick Change Groove Tool

page 30-31APPLICATION :GROOVING ALL TYPES OF MATERIALS

SERIES 24 Full Radius Groove Tools

APPLICATION :GROOVING - PROFILING

SERIES 22 ALTIN Coated Max Groove

APPLICATION :GROOVING TOUGH TO MACHINEMATERIALS. STAINLESS ETC.

page 24-25

page 28-29page 26

SERIES 06 Multi-Reach Groove Tools

APPLICATION :DEEP HOLE GROOVING

page 22-23

SERIES 20 Standard Grooving Tools

APPLICATION :GROOVING ALL TYPES OF MATERIALSERIES 27 O-Ring Groove Tools

APPLICATION :GROOVING FOR O'RINGS page 26

SERIES 19 Aluminum Boring SERIES 108 CBN and PCD TippedBoring

SERIES 91 Plastic Boring

page 12 page 11 page 11APPLICATION :BORING ALL TYPES OF PLASTICS

APPLICATION :BORING ALUMINUM

APPLICATION : BORING HARD TOMACHINE MATERIALS

INTERNAL TOOL INC.

ITI Carbide Cutting Tools

page 40

SERIES 31 Left Hand Threading Tools

APPLICATION :LEFT HAND I.D. THREADINGpage 42

SERIES 08 Multi-Reach Threading Tools

APPLICATION :DEEP HOLE THREADING

page 42

APPLICATION :THREADING ALL TYPES OF MATERIALS

SERIES 42 Quick Change Thread Tools

page 41APPLICATION :ACME I.D. THREADING

SERIES 32 & 34 Acme Threading Tools

2

PRODUCT INDEX

ITI CARBIDE: SPECIALLY BLENDED FOR OPTIMUM PERFORMANCE

SERIES 73 Face Grooving Tools

APPLICATION :FACE GROOVING page 39page 42APPLICATION :

BORE A THREAD RELIEF

SERIES 46 Thread Relief Tools SERIES 39 External Groove Tools

APPLICATION :EXTERNAL GROOVE page 35

SERIES 20 Metric SERIES 43 I.D. Chamfer SERIES 53 O-Ring Dovetail

SERIES 70 Single /Double End SplitBlanks

SERIES 42 Face Grooving QuickChange

SERIES 33 External ACME/STUBACME

121 Deep Grooverpage 27 page 35 page 27

page 38 page 39 page 32-33

page 41

SERIES 93 Carbide Reamers

page 104

APPLICATION : GROOVING ALLTYPES OF MATERIALS

APPLICATION : PROFILING- CHAMFERING

APPLICATION : FACE GROOVING

APPLICATION : ACMEEXTERNAL THREADING

APPLICATION : TURNINGO-RING DOVETAILS

APPLICATION : MAKE YOUROWN TOOL

APPLICATION : BORING EXTRADEEP GROOVES

APPLICATION : REAMING

CA

TALO

G T

WEN

TY T

WEL

VE

INTERNAL TOOL INC.


PRODUCT INDEX

QUALITY TOOLING MADE IN THE USA

APPLICATION :THREAD & GROOVEWITH THE SAME TOOL

SERIES 52 Thread & Groove Tools

page 26

page 40

SERIES 30 Threading Tools

APPLICATION :STANDARD I.D. THREADING

APPLICATION :LEFT HAND OFFSET PROFILING

SERIES 56 L.H.Offset Profile Tools

SERIES 56 Fine Point Profile Tools

APPLICATION :FINE POINT PROFILING

page 49

page 49

page 43

SERIES 42 Quick Change Profile Tool

APPLICATION :PROFILING ALL TYPES OF MATERIALS

page 48

SERIES 56 Reverse Profile Tools

APPLICATION :I.D. REVERSE PROFILING

page 14APPLICATION : BORE & THREADWITH THE SAME TOOL

SERIES 50 Bore & Thread Tools

page 49APPLICATION : PROFILING

SERIES 56 R.H. Offset Profile Tools

page 48

SERIES 56 Profile Tools

APPLICATION :I.D. PROFILING

page 13

SERIES 59 Drill & Bore Tools

APPLICATION : DRILL & BOREWITH THE SAME TOOL

SERIES 30 Metric ThreadingSERIES 38 Buttress Threading SERIES 39 External Thread

page 14APPLICATION : BORE & GROOVEWITH THE SAME TOOL

SERIES 48 Bore & Groove Tools

page 48APPLICATION :DEEP HOLE PROFILING

SERIES 09 Multi-Reach Profile Tools

page 43 page 43 page 35APPLICATION : THREADINGBUTTRESS THREADS APPLICATION : METRIC THREADS APPLICATION : EXTERNAL THREAD

INTERNAL TOOL INC.


page 72-73

page 70

SERIES 76 Carbide Key Cuttersfor Soft Material

APPLICATION : SLOTTING & GROOVINGSOFT MATERIAL ALUMINUM BRASSPLASTIC ETC

SERIES 76 Solid Carbide Key Cutters

APPLICATION :SLOTTING & GROOVING

4

PRODUCT INDEX

ITI CARBIDE: FOR EXTRA LONG TOOL LIFE

page 38-40APPLICATION :ID INSERT THREADING

SERIES 36 Insert Threading Tools

page 36

SERIES 26 Insert Grooving Tools

APPLICATION :INSERT GROOVE TOOL

page 15-17

SERIES 14 Triangle Insert Bars

APPLICATION : ID BORING

SERIES 16 Diamond Insert Bars

APPLICATION :FOR BORING STEEL page 18-19

SERIES 12 Diamond Insert Bars

APPLICATION :FOR BORING ALUMINUM

page 20-21

page 84

SERIES 78 3/8 Shank Key Cutters

APPLICATION :FOR LIVE TOOLING

page 76-79

SERIES 78 Carbide HeadKey Cutters

APPLICATION :SLOTTING & GROOVING

page 76-79

SERIES 78 Carbide Key Cutterswith Carbide Head Steel Shankfor Soft Material

APPLICATION :SLOTTING & GROOVINGSOFT MATERIAL, ALUMINUM,BRASS, PLASTIC, ETC.

page 85

SERIES 80 Full Radius Key Cutters

APPLICATION :FULL RADIUS SLOTS

SERIES 23 Large DIA Keyway Cutter

SERIES 57 Deep Slotting Key Cutters

page 37

SERIES 40 Replacement Heads

APPLICATION :HEADS & SCREWS

page 34

page 82

page 75

APPLICATION :SPECIAL GROOVE TOOLS

Groove Tools Made to Order

APPLICATION :EXTRA LARGE SLOTTING

APPLICATION :DEEP SLOTTING

CA

TALO

G T

WEN

TY T

WEL

VE

INTERNAL TOOL INC.


PRODUCT INDEX

RE-DEFINING THE INDUSTRY STANDARD

SERIES 74 Solid Carbide Key Cutters SERIES 76 Solid Carbide Key Cutters1/4" Shank

SERIES 77 Retaining Ring CarbideKey Cutters

SERIES 79 Metric Head Steel ShankKey Cutters

SERIES 80 Full Radius Solid CarbideKey Cutters

SERIES 83 Solid Key Cutter Long ReachSERIES 101 Solid Key Cutter With Radius SERIES 102 Carbide Head Key CutterWith Radius

SERIES 85 N/C C'Bores

APPLICATION : C'BORING ANDFLAT BOTTOM REAMING page 104

SERIES 103 Stagger Tooth CarbideHead Key Cutter

SERIES 107 Fine Tooth Carbide HeadKey Cutters

SERIES 84 DoubleConcave Cutters

APPLICATION : RADIUS WORK

APPLICATION :RADIUS WORK

SERIES 82 Concave RadiusKey Cutters

SERIES 90 Single Angle Cutters

APPLICATION :ANGLE CUTS & CHAMFERS

SERIES 92 Double Angle Cutters

APPLICATION : ANGLES & CHAMFERS

page 83 page 84 page 83




page 90 page 98-99

APPLICATION : SLOTTING APPLICATION : SLOTTINGWITH 1/4" SHANK

APPLICATION : SIZES FORMACHINING RETAINING RINGS

APPLICATION : STAGGEREDTOOTH SLOTTING

APPLICATION : METRIC SIZESAPPLICATION : FULL RADIUSGROOVES

APPLICATION : LONG REACH APPLICATION : CORNER RADIUS APPLICATION : CORNER RADIUS

APPLICATION : FOR INTERRUPTEDCUTS OR THIN MATERIAL

INTERNAL TOOL INC.


PRODUCT INDEX

SERIES 88 Thread Mills

APPLICATION :ID & OD THREADING

page 101

page 108 page 109

page 100-101

page 61

SERIES 89 Multiple Thread Threadmills

page 90

APPLICATION :MILL MULTIPLE THREADS IN ONE PASS

page 108

SERIES 81 Anglers

APPLICATION :MACHINING LARGE ANGLES

SERIES 72 Double Chamfer Cutters

page 106-107

page 58 page 66-68

SERIES 68 Corner Rounders

APPLICATION :ROUNDING CORNERS

SERIES 69 Tapered Endmills

page 54APPLICATION :TAPERED MILLING

page 62

SERIES 45 Back Draft Cutters With/Without Radius

APPLICATION :MILLING ANGLES& CHAMFERS

page 57

SERIES 41 Endmills in SpecialLengths and Sizes

APPLICATION : STANDARDMILLING

page 56

SERIES 21 & 41 Micro Endmills

APPLICATION :MILLING SMALL PARTS

SERIES 64 Chamfer Mills

SERIES 62 Engraving Tools

APPLICATION :ENGRAVING, CHAMFERING, C'SINKING

SERIES 126 Aluminum Endmill

SERIES 112 Roughing Endmill

SERIES 136 High Performance Endmill

6

SERIES 116 Ball Endmill

page 55

APPLICATION :CHAMFERING BOTH SIDES OF A PLATE

APPLICATION : POCKET MILLINGWITHOUT TOUCHING THE WALL

APPLICATION : HIGHPERFORMANCE MILLING

APPLICATION : HIGHPERFORMANCE MILLING INALUMINUM

APPLICATION : HIGHPERFORMANCE MILLING

APPLICATION : HIGH PERFORMANCEROUGH MILLING

CA

TALO

G T

WEN

TY T

WEL

VE

INTERNAL TOOL INC.


PRODUCT INDEX

page 92-95

SERIES 86 Dovetail Cutters

APPLICATION :DOVETAIL SLOTS & CHAMFERSpage 91APPLICATION :

FACE GROOVE DOVETAILS

SERIES 51 O-Ring Dovetail Cutters

page 60 page 61

SERIES 67 Reverse Corner Rounders

APPLICATION : ROUNDINGBACK OR INSIDE CORNERS

SERIES 65 Edge Breakers

APPLICATION :EDGE BREAKING / CHAMFERING

page 53

SERIES 75 Spotting Drills

APPLICATION :CENTER DRILLING-C'SINK

page 50

SERIES 49 Drill-Mills

APPLICATION : DRILL & MILL WITHTHE SAME TOOL

APPLICATION :CENTER DRILLING page 53

SERIES 71 Center Drills

page 47

SERIES 63 Countersinks

APPLICATION :COUNTERSINKINGpage 53

SERIES 58 Spade Drills

APPLICATION :DRILLING HARD MATERIALS

SERIES 29 Lolli Pop Cutters

SERIES 35 ACME/ STUB ACMEThread Mill

SERIES 88 Mini Threadmills

page 47page 47

SERIES 61 Runner Cutters

APPLICATION :MACHINING RUNNERS IN MOLDS

SERIES 60 Die Sinkers

APPLICATION :TAPERED BALL MILLING

SERIES 66 CNC Backspot Facers

APPLICATION :CNC BACK SPOT FACING page 60

7

page 97

page 102 page 100

APPLICATION : PROFILEMILLING

APPLICATION : ACMETHREAD MILLING

APPLICATION : THREADMILLING SMALL PARTS

INTERNAL TOOL INC.

ITI Carbide Cutting Tools8

MINBORE

MAXIMUM DEPTH

1/8 X 2"O.A.L.

1/8 X 2"O.A.L.

B-050-150B-050-200B-050-300B-050-400B-060-150B-060-200B-060-300B-060-400B-060-500B-080-150B-080-200B-080-300B-080-400B-080-500B-080-600B-100-150B-100-200B-100-300B-100-400B-100-500B-100-600B-100-700B-110-150B-110-200B-110-300B-110-400B-110-500B-110-600B-110-700B-120-250B-120-350B-120-500B-120-600B-120-700B-120-800

EDP# SHARPCORNER

1/8 X 2"O.A.L.

TOOL IDENTIFICATION

1/4 X 2-1/2"O.A.L.

.050.140

.180

.200

.060

.080

.100

.110

.120

.160

1/8 X 2"O.A.L.

1/8 X 2"O.A.L.

3/16 X 2-1/2"O.A.L.

3/16 X 2-1/2"O.A.L.

3/16 X 2-1/2"O.A.L.

1/4 X 2-1/2"O.A.L.

TAPERED NECK AND FILLET RADIUS PROVIDE MAXIMUM RIGIDITY

ALL SHANKS HAVE LOCKDOWN FLATS FOR FASTER SETUPS

MIN BORE +.000 -.005

MAXIMUM DEPTH OF CUT +.050 -.000

SERIES 10 STANDARDSOLID CARBIDE BORING TOOLS

BORING TOOLS

STANDARD BORING TOOLS

APPLICATION : STANDARDGENERAL PURPOSE BORING TOOLFOR BORING ALL TYPES OF MATERIALS

made from

4°

1.5°

10-100010-100510-101010-101510-102010-102510-103010-103510-104010-104510-105010-105510-106010-106510-107010-107510-108010-108510-109010-109510-110010-110510-111010-111510-112010-112510-113010-113510-114010-114510-115010-115510-116010-116510-1170

.250

.400

.500

.600

.700

.750

.800

.250

.400

.500

.600

.750

.9001.000.350.500.600.750.9001.0001.100.400.500.600.700.800.9001.0001.1001.2001.300

SHANK &OVERALL LENGTH

.150

.200

.300

.400

.150

.200

.300

.400

.500

.150

.200

.300

.400

.500

.600

.150

.200

.300

.400

.500

.600

.700

.150

.200

.300

.400

.500

.600

.700

.250

.350

.500

.600

.700

.800

10-117510-118010-118510-119010-119510-120010-120510-121010-121510-122010-122510-123010-123510-124010-124510-125010-125510-126010-126510-127010-127510-128010-128510-129010-129510-130010-130510-131010-131510-132010-1325

B-140-250B-140-400B-140-500B-140-600B-140-700B-140-750B-140-800B-160-250B-160-400B-160-500B-160-600B-160-750B-160-900B-160-1000B-180-350B-180-500B-180-600B-180-750B-180-900B-180-1000B-180-1100B-200-400B-200-500B-200-600B-200-700B-200-800B-200-900B-200-1000B-200-1100B-200-1200B-200-1300

SHANK DIAMETER

MAXIMUM DEPTH

TOOL IDENTIFICATION


ALL TOOLS ON THIS PAGE ARE AVAILABLE IN LEFT HANDADD -LH TO EDP NUMBER WHEN ORDERING Example : 10-1630-LH

ITI CARBIDE: FOR THE HIGHEST PRODUCTION

ITI CARBIDE

BO

RIN

G T

OO

LS

10-1000-R10-1005-R10-1010-R10-1015-R10-1020-R10-1025-R10-1030-R10-1035-R10-1040-R10-1045-R10-1050-R10-1055-R10-1060-R10-1065-R10-1070-R10-1075-R10-1080-R10-1085-R10-1090-R10-1095-R10-1100-R10-1105-R10-1110-R10-1115-R10-1120-R10-1125-R10-1130-R10-1135-R10-1140-R10-1145-R10-1150-R10-1155-R10-1160-R10-1165-R10-1170-R

EDP#WITH RADIUS

COATINGS ARE AVAILBLEALTIN FOR STEEL ADD "-A" TO EDP #TIN FOR ALUMINUM ADD "-T" TO EDP #

EDP#WITH RADIUS

10-1175-R10-1180-R10-1185-R10-1190-R10-1195-R10-1200-R10-1205-R10-1210-R10-1215-R10-1220-R10-1225-R10-1230-R10-1235-R10-1240-R10-1245-R10-1250-R10-1255-R10-1260-R10-1265-R10-1270-R10-1275-R10-1280-R10-1285-R10-1290-R10-1295-R10-1300-R10-1305-R10-1310-R10-1315-R10-1320-R10-1325-R

MINBORE

NOW AVAILABLE WITH CORNER RAD'S AND COATED

STANDARDSHARP CORNER

EDP# SHARPCORNER

EXAMPLE:10-1000-R-A = B-050-150 ALTIN COATED .003/.005 RADIUS

WITH TIP RADIUS SIZES1/8 SHANK .003/.005 RADIUS3/16 TO 1/2 SHANK .005/.008 RADIUS

CA

TALO

G T

WEN

TY T

WEL

VE

INTERNAL TOOL INC.


3/8

X

2-1/2"

O.A.L.

1/2 X 6"O.A.L.

1/2 X 3"O.A.L.

10-133010-133510-134010-134510-135010-135510-136010-136510-137010-137510-138010-138510-139010-139510-140010-140510-141010-141510-142010-142510-143010-143510-144010-144510-145010-145510-146010-146510-147010-147510-148010-148510-149010-149510-150010-150510-1510

5/16

X

2-1/2"

O.A.L.

.320

3/8 X 4" O.A.L.

.320

.290

.230

5/16

X

2-1/2

O.A.L.

.400

.500

.600

.700

.800

.9001.0001.1501.2001.2501.4001.5001.600.500.600.750.9001.0001.1001.2501.3501.5001.6001.750.500.600.750.9001.0001.1001.2501.5001.6001.8002.0002.5003.000

TOOL IDENTIFICATION

3/8 X4" O.A.L.

1/2 X 4" O.A.L.

B-230-400B-230-500B-230-600B-230-700B-230-800B-230-900B-230-1000B-230-1150B-230-1200B-230-1250B-230-1400B-230-1500B-230-1600B-290-500B-290-600B-290-750B-290-900B-290-1000B-290-1100B-290-1250B-290-1350B-290-1500B-290-1600B-290-1750B-320-500B-320-600B-320-750B-320-900B-320-1000B-320-1100B-320-1250B-320-1500B-320-1600B-320-1800B-320-2000B-320-2500B-320-3000

SERIES 10 STANDARDSOLID CARBIDE BORING TOOLSCONTINUED

B-360-500B-360-600B-360-750B-360-900B-360-1000B-360-1150B-360-1250B-360-1500B-360-1600B-360-1800B-360-2000B-360-2500B-360-3000B-490-750B-490-1000B-490-1250B-490-1500B-490-2000B-490-2500B-490-2600B-490-3000B-490-3500B-490-4000B-490-4500

10-151510-152010-152510-153010-153510-154010-154510-155010-155510-156010-156510-157010-157510-158010-158510-159010-159510-160010-160510-161010-161510-162010-162510-1630

3/8

X

2-1/2"

O.A.L.

TOOL IDENTIFICATION

.500

.600

.750

.9001.0001.1501.2501.5001.6001.8002.0002.5003.000.7501.0001.2501.5002.0002.5002.6003.0003.5004.0004.500

.490

.490

.360

.360

.490

MAXIMUM DEPTH OF CUT +.050 -.000

MINIMUM BORE +.000 -.005

TAPERED NECK AND FILLET RADIUS PROVIDE MAXIMUM RIGIDITY

1.5°

4°

APPLICATION : STANDARDGENERAL PURPOSE BORING TOOLFOR BORING ALL TYPES OF MATERIALS

STANDARD BORING TOOLS

BORING TOOLS

made from ITI CARBIDE


SHANK DIAMETER

PROUDLY MADE IN THE USA 9

BO

RIN

G T

OO

LS

ALL TOOLS ON THIS PAGE ARE AVAILABLE IN LEFT HANDADD -LH TO EDP NUMBER WHEN ORDERING Example : 10-1630-LH

MINBORE

10-1330-R10-1335-R10-1340-R10-1345-R10-1350-R10-1355-R10-1360-R10-1365-R10-1370-R10-1375-R10-1380-R10-1385-R10-1390-R10-1395-R10-1400-R10-1405-R10-1410-R10-1415-R10-1420-R10-1425-R10-1430-R10-1435-R10-1440-R10-1445-R10-1450-R10-1455-R10-1460-R10-1465-R10-1470-R10-1475-R10-1480-R10-1485-R10-1490-R10-1495-R10-1500-R10-1505-R10-1510-R

EDP#WITH RADIUS

MINBORE

EDP#WITH RADIUS

10-1515-R10-1520-R10-1525-R10-1530-R10-1535-R10-1540-R10-1545-R10-1550-R10-1555-R10-1560-R10-1565-R10-1570-R10-1575-R10-1580-R10-1585-R10-1590-R10-1595-R10-1600-R10-1605-R10-1610-R10-1615-R10-1620-R10-1625-R10-1630-R

NOW AVAILABLE WITH CORNER RAD'S AND COATED

STANDARDSHARP CORNER

MAXIMUM DEPTH

MAXIMUM DEPTH



EDP# SHARPCORNER

EDP# SHARPCORNER

COATINGS ARE AVAILBLEALTIN FOR STEEL ADD "-A" TO EDP #TIN FOR ALUMINUM ADD "-T" TO EDP #

EXAMPLE:10-1000-R-A = B-050-150 ALTIN COATED .003/.005 RADIUS

WITH TIP RADIUS SIZES1/8 SHANK .003/.005 RADIUS3/16 TO 1/2 SHANK .005/.008 RADIUS

INTERNAL TOOL INC.


ALTIN COATED GROUND WITH HELICAL RAKEELLIPTICAL NECK FOR GREATER STRENGTH

SERIES 18 MAX BORE SOLID CARBIDEMAXIMUM STRENGTH BORING TOOLS


MAXIMUM DEPTH +.050 -.000


MAX-BORE BORING TOOLS

2°

3°

ALTIN COATED MAX-BORE BORING TOOLS

Max-Bore is the Ultimate in boring tools. Featuring an elliptical neck forgreater strength. A special helical flute for maximum shearing action witha better finish, and a ALTIN coating for a longer life. Max-Bore outper-forms and outlasts our competitors boring tools two to one.

APPLICATION : BORING TOUGH MATERIALS STAINLESS,TITANIUM, 4140, 4340, D2, NICKEL, MONEL, INCONEL ETC.

CORNER RADIUS

ITI CARBIDEmade from

SHANK DIAMETER

BO

RIN

G T

OO

LS

ON THE WEB: WWW.INTERNALTOOL.COM

MB-050-200MB-050-300MB-050-400MB-060-200MB-060-300MB-060-400MB-060-500MB-080-200MB-080-300MB-080-400MB-080-500MB-080-600MB-090-400MB-090-500MB-090-600MB-100-300MB-100-400MB-100-500MB-100-600MB-100-700MB-110-300MB-110-400MB-110-500MB-110-600MB-110-700MB-120-400MB-120-500MB-120-600MB-120-700MB-120-800MB-140-400MB-140-500MB-140-600MB-140-700MB-140-800MB-140-900MB-140-1000MB-140-1250MB-160-500MB-160-600MB-160-800MB-160-1000MB-160-1250

MB-180-400MB-180-500MB-180-600MB-180-800MB-180-1000MB-180-1250MB-180-1500MB-200-400MB-200-500MB-200-800MB-200-1000MB-200-1250MB-200-1500MB-200-1750MB-240-500MB-240-800MB-240-1000MB-240-1250MB-240-1500MB-290-750MB-290-1000MB-290-1250MB-290-1500MB-290-1750MB-310-500MB-310-750MB-310-1000MB-310-1250MB-310-1500MB-310-1750MB-360-500MB-360-750MB-360-1000MB-360-1250MB-360-1500MB-490-750MB-490-1000MB-490-1250MB-490-1500

MINIMUM BORE

MAXIMUM DEPTH

ORDER EDP#

TOOL IDENTIFICATION


CORNER RADIUS

18-100018-100518-101018-101518-102018-102518-103018-103518-104018-104518-105018-105518-106018-106518-107018-107518-108018-108518-109018-109518-110018-110518-111018-111518-112018-112518-113018-113518-114018-114518-115018-115518-116018-116518-117018-117518-118018-118518-119018-119518-120018-120518-1210

18-121218-121518-122018-122518-123018-123518-124018-124218-124518-125018-125518-126018-126518-127018-127518-128018-128518-129018-129518-130018-130518-131018-131518-132018-132218-132518-133018-133518-134018-134518-135018-135518-136018-136518-137018-137518-138018-138518-1390

.050

.060

.080

.090

.100

.110

.120

.140

.200

.300

.400

.200

.300

.400

.500

.200

.300

.400

.500

.600

.400

.500

.600

.300

.400

.500

.600

.700

.300

.400

.500

.600

.700

.400

.500

.600

.700

.800

.400

.500

.600

.700

.800

.9001.0001.250.500.600.8001.0001.250

.400

.500

.600

.8001.0001.2501.500.400.500.8001.0001.2501.5001.750.500.8001.0001.2501.500.7501.0001.2501.5001.750.500.7501.0001.2501.5001.750.500.7501.0001.2501.500.7501.0001.2501.500

MINIMUM BORE

MAXIMUM DEPTH

ORDER EDP#

TOOL IDENTIFICATION


CORNER RADIUS

.180

.200

.240

.290

.310

.360

.490

3/16 X 2-1/2"O.A.L.

1/4 X 2-1/2"O.A.L.

1/4 X 2-1/2"O.A.L.

5/16 X 2-1/2"O.A.L.

5/16 X 2-1/2"O.A.L.

3/8 X 2-1/2"O.A.L.

1/2 X 3"O.A.L.

1/8 X 2"O.A.L.

1/8 X 2"O.A.L.

1/8 X 2"O.A.L.

1/8 X 2"O.A.L.

1/8 X 2"O.A.L.

1/8 X 2"O.A.L.

1/8 X 2"O.A.L.

3/16 X 2-1/2"O.A.L.

.007

.007

.007

.007

.007

.007

.007

.007

.007

.007

.007

.007

.007

.007

.015

.015

10

.160 3/16 X 2-1/2"O.A.L.

BORING TOOLS

New Sizes Available!



HP USER

Rectangle

HP USER

Text Box

missouricarbide.com

CA

TALO

G T

WEN

TY T

WEL

VE

INTERNAL TOOL INC.


MULTI-REACH BORING TOOLSAPPLICATION : MULTI-REACH BORING

NO LONGER LIMITED BY NECK LENGTH. ONE TOOL REPLACES A SERIES OF OTHERS.

04-109504-110004-111004-112004-113004-1140

ORDER EDP#

MINIMUM BORE

SHANKDIAMETER

3/16"1/4"5/16"3/8"1/2"5/8"

.220

.280

.350

.420

.560

.700

SHANK LENGTH

4"4"4"6"6"6"

SOLID CARBIDE SHANKS PROVIDE MAXIMUM RIGIDITY.

ITI CARBIDE

CORNER RADIUS

.005

.007

.007

.010

.010

.015

MINIMUM BORE +.000 -.005 CORNER

RADIUSSHANK DIAMETER

ALTIN COATEDORDER EDP#

04-1095-C04-1100-C04-1110-C04-1120-C04-1130-C04-1140-C

made from

91-100091-101091-102091-103091-104091-105091-106091-107091-108091-109091-110091-111091-112091-113091-1140

ORDER EDP#

MINIMUM BORE

PLASTIC CUTTING BORING TOOLSMAXIMUM DEPTH


.250

.500

.800

.500

.7501.250.500.7501.250.500.7501.250.7501.0001.500

1/8 X 2"O.A.L.

3/16 X 2-1/2"O.A.L.

1/4 X 2-1/2"O.A.L.

3/8 X 2-1/2"O.A.L.

1/2 X 3"O.A.L.

APPLICATION : CLEARANCE AND RELIEF ANGELS FOR CUTTING PLASTIC

MINIMUM BORE +.000 -.005 MAXIMUM

DEPTH +.030 -.000

10°

5°

SERIES 91 ITI CARBIDEmade from

BO

RIN

G T

OO

LS

SERIES 91 PLASTIC BORECARBIDE BORING TOOLS MADE FOR CUTTING PLASTICS

11

108-1000108-1050108-1100108-1150108-1200108-1250108-1300108-1350108-1400108-1450108-1500108-1550108-1600108-1650108-1700

CBN EDP#

MINIMUM BORE

CBN AND PCD TIPPED BORING TOOLS

MAXIMUM DEPTH


.250

.500

.800

.500

.7501.250.500.7501.250.500.7501.250.7501.0001.500

1/8 X 2"O.A.L.

3/16 X 2-1/2"O.A.L.

1/4 X 2-1/2"O.A.L.

3/8 X 2-1/2"O.A.L.

1/2 X 3"O.A.L.


MAXIMUM DEPTH +.030 -.000

3°

SERIES 108

PCD EDP#108-5000108-5050108-5100108-5150108-5200108-5250108-5300108-5350108-5400108-5450108-5500108-5550108-5600108-5650108-5700

APPLICATION : CBN for hard ferrous materials 45 rc and harder. PCD for abrasive non ferrous materials.

1.5°

.004radius

.120

.180

.240

.370

.490

.120

.180

.240

.370

.490

BORING TOOLS


SERIES 04

INTERNAL TOOL INC.

ITI Carbide Cutting ToolsCA

TA

LO

G F

OU

RT

EE

N

RADIUS

4°

7°

MIN BORESHANK DIAMETER

MAX DEPTH

42-098042-098542-099042-099542-100042-100542-101042-101542-102042-102542-103042-103542-104042-104542-105042-105542-106042-106542-107042-107542-108042-108542-109042-109542-110042-1105

.080

.180

.140

.120

.100

.060

.050

MINIMUM

BORE

MAX

DEPTHORDER EDP#

.160

.100

.150

.200

.300

.200

.300

.200

.300

.400

.500

.200

.300

.400

.500

.200

.300

.400

.500

.600

.700

.200

.300

.400

.500

.600

.700

QUICK CHANGE

BORING TOOLS

ITI CARBIDE

ALTINCOATED EDP#

made from

.040

.030 42-0980-C42-0985-C42-0990-C42-0995-C42-1000-C42-1005-C42-1010-C42-1015-C42-1020-C42-1025-C42-1030-C42-1035-C42-1040-C42-1045-C42-1050-C42-1055-C42-1060-C42-1065-C42-1070-C42-1075-C42-1080-C42-1085-C42-1090-C42-1095-C42-1100-C42-1105-C

MAX DEPTH

MINIMUM BORE

SHARP TIPNO RADIUS

ALL THE DETAIL AND QUALITY FROM OUR STANDARD LINE LESS EXPENSIVE QUICK CHANGE STYLE NEW FEATURE - AXIAL RAKE FOR FASTER FREER CUTTING QUICK CHANGE - REPLACE TOOLS QUICKLY AND ACCURATELY

.200

.300

.400

.500

.600

.700

.200

.300

.400

.500

.600

.700

.800

.9001.0001.100.200.300.400.500.600.700.800.9001.0001.100

42-1110-C42-1115-C42-1120-C42-1125-C42-1130-C42-1135-C42-1140-C42-1145-C42-1150-C42-1155-C42-1160-C42-1165-C42-1170-C42-1175-C42-1180-C42-1185-C42-1190-C42-1195-C42-1200-C42-1205-C42-1210-C42-1215-C42-1220-C42-1225-C42-1230-C42-1235-C

42-111042-111542-112042-112542-113042-113542-114042-114542-115042-115542-116042-116542-117042-117542-118042-118542-119042-119542-120042-120542-121042-121542-122042-122542-123042-1235

SERIES 19 ALUMINUM BORESOLID CARBIDE FOR ALUMINUM

MINIMUM

BORE

MAX

DEPTHORDER EDP#

ALTINCOATED EDP#

BORIN

G T

OOLS

19-120019-125019-129019-130019-135019-139019-140019-145019-149019-150019-155019-159019-160019-165019-1690

ORDER EDP#

MINIMUM BORE

ALUMINUM CUTTING BORING TOOLS

MAXIMUM

DEPTH


.250

.500

.800

.500

.7501.250.500.7501.250.500.7501.250.7501.0001.500

1/8 X 2"O.A.L.

3/16 X 2-1/2"O.A.L.

1/4 X 2-1/2"O.A.L.

3/8 X 2-1/2"O.A.L.

1/2 X 3"O.A.L.

APPLICATION : CLEARANCE AND RELIEF ANGELS FOR CUTTING ALUMINUM


SERIES 42 QUICK CHANGE BORESOLID CARBIDEHIGH PRODUCTIONBORING TOOL TIPS

HOLDERS ARE AVAILABLE WITH3/8, 1/2, 5/8, & 3/4 SHANK SIZES.STANDARD STYLE3/8" SHANK EDP# 42-90001/2" SHANK EDP# 42-90055/8" SHANK EDP# 42-90103/4" SHANK EDP# 42-901522 MM SHANK EDP# 42-9020

COOLANT HOLE STYLE3/8" SHANK EDP #42-95001/2" SHANK EDP #42-95055/8" SHANK EDP #42-95103/4" SHANK EDP #42-951522 MM SHANK EDP #42-9520

EXTRA SCREW EDP# 42-8888

ZIRCONIUM NITRIDE COATED

CORNER RADIUS

.007

.007

.007

.015

.015

12 INTERNAL TOOL THE LEADER IN INNOVATION

.120

.180

.240

.370

.490

QUICK CHANGE

HOLDERS

Quick Change Tools AreAlso Available For Grooving,Face Grooving, ThreadingAnd, Profiling. See Pages30-31,39,42, And 43.

BORING TOOLS

CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL INC.


BORIN

G T

OOLS

BORE & BACK CHAMFER TOOLS

APPLICATION : BORING RELIEVING PROFILING BORE YOUR HOLE THEN MOVEOVER & REMOVE THE BURR ONTHE BACKSIDE OF THE HOLE

3/8 X 2-1/2 O.A.L.

5/16 X 2-1/2 O.A.L.

1/4 X 2-1/2 O.A.L.

1/2 X 3" O.A.L.

3/16 X 2-1/2 O.A.L.

ORDER

EDP#

MIN

HOLEOFFSETWIDTH

MAX

DEPTH

.050 .0451/8

3/16 .050

.0601/4

.0805/16

.1203/8

.1301/2

1/8 X 2" O.A.L.

ALL SHANKS HAVE LOCKDOWN FLATSFOR FASTER SETUPS

MAXDEPTH

WIDTH

MINHOLE

OFFSET

45°

5°

4°

55-110055-110555-111055-111555-112055-112555-113055-113555-114055-114555-115055-1155

.300

.500

.400

.800

.5001.000.7501.250.7501.2501.0001.500

.060

.080

.080

.100

.110

RADIUS

.015

.015

.015

.020

.020

.030

RADIUS

ALTINCOATED EDP#

55-1100-C55-1105-C55-1110-C55-1115-C55-1120-C55-1125-C55-1130-C55-1135-C55-1140-C55-1145-C55-1150-C55-1155-C


SERIES 55 BORE & BACK CHAMFERSOLID CARBIDE

ORDER

EDP#

MIN

HOLE

MAX

DEPTH

DB-240-500DB-240-750DB-240-1000DB-310-500DB-310-750DB-310-1000DB-360-500DB-360-750DB-360-1000DB-490-500DB-490-750DB-490-1000

.500

.7501.000.500.7501.000.500.7501.000.500.7501.000

1/4

5/16

3/8

SERIES 54 DOUBLE EDGE SOLID CARBIDE

1/4 X 2-1/2 O.A.L.

5/16 X 2-1/2 O.A.L.

3/8 X 2-1/2 O.A.L.

MAXDEPTH

MIN.HOLE

54-110054-110554-111054-111554-112054-112554-113054-113554-114054-114554-115054-1155

1/2 1/2 X 3" O.A.L.

APPLICATION : DRILL, BORE, ANDTURN ALL WITH THE SAME TOOL.

TURN OD

BORE ID

ITI CARBIDE


TOOL

IDENTIFICATION

made from

DOUBLE EDGE BORING TOOLS

ORDER

EDP#

MIN

HOLE

MAX

DEPTH

DBO-250-500DBO-250-750DBO-250-1000DBO-312-500DBO-312-750DBO-312-1000DBO-375-500DBO-375-750DBO-375-1000DBO-500-500DBO-500-750DBO-500-1000

.500

.7501.000.500.7501.000.500.7501.000.500.7501.000

1/4

5/16

3/8

1/4 X 2-1/2 O.A.L.

5/16 X 2-1/2 O.A.L.

3/8 X 2-1/2 O.A.L.

MAXDEPTH

MINHOLE

59-120059-120559-121059-121559-122059-122559-123059-123559-124059-124559-125059-1255

1/2 1/2 X 3" O.A.L.

SERIES 59 DRILL & BORE SOLID CARBIDE

APPLICATION : DRILL, BORE, AND TURN ALL WITH THE SAME TOOL. FEATURING A DRILL POINT FOR FASTER, STRAIGHTER CUTTING

15° POINT

ITI CARBIDE

2°


TOOL

IDENTIFICATION

made from

DRILL & BORE TOOLS

13THE MOST UNIQUE LINE OF CUTTING TOOLS AVAILABLE




BORING TOOLS

INTERNAL TOOL INC.


TA

LO

G F

OU

RT

EE

N

ORDER

EDP# TOOL

IDENTIFICATION

MIN

HOLEOFFSETTHREAD

WIDTH

MAX

DEPTH

CM-240-500CM-240-750CM-240-1000CM-310-500CM-310-750CM-310-1000CM-360-500CM-360-750CM-360-1000

50-110050-110550-111050-111550-112050-112550-113050-113550-1140

.0501/4

.0605/16

1/4 X 2-1/2 O.A.L.

.0803/8

COMBINATION BORE & THREAD

5/16 X 2-1/2 O.A.L.

3/8 X 2-1/2 O.A.L.

COMBINATION TOOLS

SERIES 50

.090

.065

.055

TOOL

IDENTIFICATION

ORDER

EDP#

MIN

HOLE OFFSETGROOVE

WIDTH

MAX

DEPTH

.094 .0501/4

.125 .0605/16

.156 .0803/8

COMBINATION BORE & GROOVE

SERIES 48

1/4 X 2-1/2 O.A.L.

5/16 X 2-1/2 O.A.L.

3/8 X 2-1/2 O.A.L.

MAXDEPTH

MINHOLE

OFFSET

GROOVE WIDTH

MINHOLE

OFFSET

60°

ALL TOOLS ON THIS PAGE ARE RIGHT HAND CUTTING

APPLICATION : BORING & THREADING WITH THE SAME TOOL.

APPLICATION : BORING & GROOVING WITH THE SAME TOOL.

MAX

DEPTH

ITI CARBIDE

ITI CARBIDE

TURN OD

THREAD OD

THREAD ID

BORE ID

GROOVE ID

BORE ID

GROOVE OD

TURN OD

GROOVE WIDTH CAN BE MODIFIED NO EXTRA CHARGE

made from

made from

BORIN

G T

OOLS

.500

.7501.000.500.7501.000.500.7501.000

.500

.7501.000.500.7501.000.500.7501.000

48-110048-110548-111048-111548-112048-112548-113048-113548-1140

BG-240-500BG-240-750BG-240-1000BG-310-500BG-310-750BG-310-1000BG-360-500BG-360-750BG-360-1000

BORING / GROOVING TOOL HOLDER

Tool holder for allset screw flat type shanks

APPLICATION :A HOLDER THAT WILL HOLD OUR STANDARD SET SCREW FLAT STYLE 1/8" THRU 1/2" DIAMETER SHANK TOOLS.

Series 98 BUSHINGS

SERIES 98

ORDER

EDP#

BUSHING

SIZE

1/83/161/45/163/81/2

98-245098-245598-246098-246598-247098-2475

98-240098-2405

ORDER

EDP#

SHANK

STYLE

3/4" ROUND1" SQUARE

Series 98 HOLDERS

MAKING QUALITY TOOLS SINCE 195714



CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL INC.


5/16" MINIMUM BORE

INSERTS FOR 5/16" BARS - 5/32" INSERT I.C.

HEAD I.D. ORDER EDP#ORDER EDP# ORDER EDP# INSERTTHICKNESS

SCREWNUMBER

CARBIDESHANK

STEELSHANK

CARBIDEWITH COOLANT HOLE

T11-31 BHF-0203S

SHANKLENGTH

6"

INSERT I.C.

1/4 5/32 99-1100 1/163"

14-1042 14-1045

SHANK DIA.

SCREW EDP #

SHANK STYLES

14-1030 14-103314-1039

T1200A CERMET

CARBIDE GRADE

TIPRADIUS

SUMITOMO NUMBER

AC5104 TIN COATEDT1200A CERMET

T2000Z

AC325 TIN COATED

ORDER EDP#

3/8" MINIMUM BOREHEAD I.D. ORDER EDP#ORDER EDP# ORDER EDP#

INSERTTHICKNESS

SCREWNUMBER

CARBIDESHANK

STEELSHANK


T11-37 BHF-0203B

SHANKLENGTH

6"

INSERT I.C.

5/16 3/16 99-1105 3/323"

14-1060 14-1063

SHANK DIA.

SHANK STYLES

14-1048 14-1051 14-105414-1057


INSERTTHICKNESS

SCREWNUMBER

CARBIDESHANK

STEELSHANK


T11-43 BHF-0203B

SHANKLENGTH

6"

INSERT I.C.

3/8 3/16 3/323"

14-1078 14-1081

SHANK DIA.

SHANK STYLES

14-1066 14-1069 14-107214-1075

T12A CERMET

CARBIDE GRADE

TPGT-630.5L

TIPRADIUS

SUMITOMO NUMBER

AC5104 TIN COATEDT12A CERMET

T2000Z

AC530U TIN COATED

TPGT-630.5L

TPGT-631LFXTPGT-631L

ORDER EDP#

TPGT-630.5L

14-1036

SERIES 14

SERIES 14

INDEXABLE INSERTTRIANGLE 5/32 I.C.

99-1105

TBGT-521LTBGT-520.5LFWTBGT-520.5LFXTBGT-521LTBGT-521LFX

15-110015-111015-112015-113015-1140

.007

.007

.007

.015

.015

.007

.007

.007

.015

.015

15-115015-116015-117015-118015-1190

INDEXABLE INSERT BORING BARSUSING SUMITOMO TRIANGLE INSERTS

INSERTS FOR 3/8" & 7/16" BARS - 3/16" INSERT I.C.


SCREW EDP #

SCREW EDP #

NOTICE: INSERT BORING BARS ARE MADE TO ORDER; PLEASE CALL FOR DELIVERY TIME,

OTHERWISE THE DELIVERY TIME WILL BE QUOTED IN AN ORDER CONFIRMATION

BORIN

G T

OOLS

INDEXABLE INSERTTRIANGLE 3/16 I.C.

INTERNAL TOOL INC.


TA

LO

G F

OU

RT

EE

N

16


INSERTTHICKNESS

SCREWNUMBER

CARBIDESHANK

STEELSHANK


T11-50 BHF0306R

SHANKLENGTH

6"

INSERT I.C.

3/8 1/4 1/8 3"14-1096 14-1099

SHANK DIA.

SHANK STYLES

14-1084 14-1087 14-109014-1093


SCREWNUMBER

CARBIDESHANK

STEELSHANK


T11-56

SHANKLENGTH

6"

INSERT I.C.

1/2 1/4

3"14-1114 14-1117

SHANK DIA.

14-1102 14-110514-1111


SCREWNUMBER

CARBIDESHANK

STEELSHANK


T11-62

SHANKLENGTH

6"

INSERT I.C.

1/2 1/4 1/8

3"14-1150 14-1153

SHANK DIA.

14-1138 14-1141 14-114414-1147

12"9"

14-113214-1120 14-112314-1129

14-112614-1135

14-1108

9" 14-1156 14-1159 14-116214-117114-1165 14-116812"


SCREWNUMBER

CARBIDESHANK

STEELSHANK


T11-68

SHANKLENGTH

6"

INSERT I.C.

5/8 1/4 1/8

3"

14-1186 14-1189

SHANK DIA.

14-1174 14-117714-1183


SCREWNUMBER

CARBIDESHANK

STEELSHANK


T11-75

SHANKLENGTH

6"

INSERT I.C.

5/8 1/4 99-1165

3"

14-1222 14-1225

SHANK DIA.

14-1210 14-1213 14-121614-1219

12"9"

14-120414-1192 14-119514-1201

14-119814-1207

14-1180

9" 14-1228 14-1231 14-123414-124314-1237 14-124012"

1/8

INSERTS FOR ABOVE BARS - 1/4" INSERT I.C.

T130Z CERMET

CARBIDE GRADE

TPGG-220.5L

TIPRADIUS

.007

.007

SUMITOMO NUMBER

T2000Z UN-COATED

T130Z CERMET .015

TPGG-220.5L

TPGG-221L

ORDER EDP#

SERIES 14

INSERTTHICKNESS

INSERTTHICKNESS

INSERTTHICKNESS

INSERTTHICKNESS

BHF0308R

BHF0308R

BHF0308R

1/8BHF0308R

99-1165

99-1165

99-1110

T2000Z UN-COATED .015 TPGG-221LINDEXABLE INSERTTRIANGLE 1/4 I.C.

15-120015-121015-122015-1230

INDEXABLE INSERT BORING BARSUSING TRIANGLE INSERTS

THE LEADER IN INNOVATION

SCREW EDP #

SCREW EDP #

SCREW EDP #

99-1165

SCREW EDP #

SCREW EDP #

BORIN

G T

OOLS

CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL INC.


7/8" MINIMUM BOREHEAD I.D. ORDER EDP#ORDER EDP# ORDER EDP# I NSERT

THICKNESS

SCREWNUMBER

CARBIDESHANK

STEELSHANK


T11-87 BFXO410R

SHANKLENGTH

6"

INSERT I.C.

3/4 3/8 99-1115 3/16

3"14-1258 14-1261

SHANK DIA.

14-1246 14-1249 14-125214-1255

9" 14-1264 14-1267 14-127014-127914-1273 14-127612"

1" MINIMUM BOREHEAD I.D. ORDER EDP#ORDER EDP# ORDER EDP# I NSERT

THICKNESS

SCREWNUMBER

CARBIDESHANK

STEELSHANK


SHANKLENGTH

6"

INSERT I.C.

3/4 3/8 3/16

3"14-1294 14-1297

SHANK DIA.

14-1282 14-128514-1291

1-1/8" MINIMUM BOREHEAD I.D. ORDER EDP#ORDER EDP# I NSERT

THICKNESS

SCREWNUMBER

CARBIDESHANK

STEELSHANK

T11-112

SHANKLENGTH

6"

INSERT I.C.

1" 3/16

3"14-1330

SHANK DIA.

SHANK STYLES

14-1318 14-132114-1327

12"9"

14-131214-1300 14-130314-1309

14-130614-1315

14-1288

9" 14-1336 14-133914-1345 14-134812"


T1200A CERMET

CARBIDE GRADE

TPGG-330.5L

TIPRADIUS

SUMITOMO NUMBER

AC-200 TIN COATED

G10E C-2

EH10Z TIN COATED TPMT-332ENFTPMT-331ENF

ORDER EDP#

TPGG-331L

SERIES 14

T11-100 99-1115 BFXO410R

3/8 BFXO410R

TPGG-330.5LG10E C-2

AC-2500 TIN COATED

EH-10

TPMT-332ENF

TPMT-332ENF INDEXABLE INSERT

TRIANGLE 3/8 I.C.

15-125015-126015-127015-128015-129015-130015-1310

.007

.007

.015

.015

.031

.031

.031

INDEXABLE INSERT BORING BARSUSING SUMITOMO TRIANGLE INSERTS

ITC CARBIDE: PREMIUM SUBMICRON GRADE CARBIDE

SCREW EDP #

SCREW EDP #

99-1115

SCREW EDP #



BORIN

G T

OOLS

INTERNAL TOOL INC.


TA

LO

G F

OU

RT

EE

N


INSERT

THICKNESS

CARBIDE SHANK

STEELSHANK


D07-37 S-905/16 1/4 99-1120 3/32

SHANK STYLES

7/16" MINIMUM BORE

D07-43


CARBIDESHANK

STEELSHANK


D07-50 3/8


CARBIDESHANK

STEELSHANK


D07-56

HEAD I.D. ORDER EDP#ORDER EDP# ORDER EDP#

CARBIDESHANK

STEELSHANK


D07-62 1/2 1/4


CARBIDESHANK

STEELSHANK


D07-68 5/8


CARBIDESHANK

STEELSHANK


D07-75 5/8

SERIES 16

S-953/8 1/4 99-1125 3/32

S-951/4 3/32

1/2 S-951/4 3/32

S-95 3/32

1/4 S-95 3/32

S-95 3/321/4

5/8" MINIMUM BORE

TOOL GEOMETRY FOR BORING STEEL & TOUGH MATERIALS

16-166016-1669

3"6"

16-166316-1672

16-166616-1675

HEAD I.D. ORDER EDP#ORDER EDP# ORDER EDP#

CARBIDE SHANK

STEELSHANK


16-167816-1687

16-168416-1693

16-168116-1690

3"6"

16-170216-1711

16-169916-1708

16-169616-1705

INSERT

THICKNESS

3"6"

3"6"9"12"

16-171416-172316-173216-1741

16-172016-172916-173816-1747

16-171716-172616-173516-1744

16-175016-175916-176816-1777

3"6"9"12"

INSERTTHICKNESS

16-175316-176216-177116-1780

16-175616-176516-177416-1783

16-178616-179516-180416-1813

16-178916-179816-180716-1816

16-179216-180116-181016-1819

3"6"9"12"

16-182216-183116-184016-1849

16-182516-183416-184316-1852

16-182816-183716-184616-1855

SHANKLENGTH

C-2C-6TIN COATEDC-2C-6TIN COATED

.015

.015

.015

.032

.032

.032

17-149017-150017-151017-152017-153017-1540

CARBIDE GRADE

TIPRADIUS

ORDER EDP#

INSERTTHICKNESS

SCREWNUMBER

INSERT I.C.

SHANK DIA.

INSERTTHICKNESS

SCREWNUMBER

INSERT I.C.

SHANK DIA.

SCREWNUMBER

INSERT I.C.

SHANK DIA.

SCREWNUMBER

INSERT I.C.

SHANK DIA.

SCREW EDP #

SCREWNUMBER

INSERT I.C.

SHANK DIA.

SCREWNUMBER

INSERT I.C.

SHANK DIA.

SHANKLENGTH

SHANKLENGTH

SHANKLENGTH

SHANKLENGTH

SHANKLENGTH

SHANKLENGTH

3"6"9"12"

INSERTTHICKNESS

SCREWNUMBER

INSERT I.C.

SHANK INSERTTHICKNESS


1/4 I.C.CCGT 21.51INSERT

INDEXABLE INSERT BORING BARSUSING 7 DEGREE DIAMOND SHAPED INSERTS

UN-MATCHED TOOL VARIETY

SCREW EDP #

SCREW EDP #

99-1125

99-1125

SCREW EDP #

SCREW EDP #

SCREW EDP #

SCREW EDP #

99-1125

99-1125

99-1125

INDEXABLE INSERTDIAMOND 5/16 I.C.

BORIN

G T

OOLS

18

CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL INC.


1-1/8 MINIMUM BORE

11/16" MINIMUM BORE


CARBIDESHANK

STEELSHANK


D07-87 S-983/4 3/8 5/32


CARBIDESHANK

STEELSHANK


D07-100

HEAD I.D. ORDER EDP#ORDER EDP# INSERTTHICKNESS

CARBIDESHANK

STEELSHANK

D07-112

SHANKLENGTH

1"

S-983/4 3/8 5/32

S-983/8 5/32

CARBIDE GRADE

TIPRADIUS

ORDER EDP#

C-2C-6TIN COATEDC-2C-6TIN COATED

.015

.015

.015

.032

.032

.032

17-155017-156017-157017-158017-159017-1600


CARBIDESHANK

STEELSHANK


D07-68B 5/8 3/8 5/32


SCREWNUMBER

CARBIDESHANK

STEELSHANK


D07-62B S-98-S

INSERT I.C.

1/2 3/8 99-1132 5/32

SHANK DIA.

SCREW EDP #

SERIES 16

3/8 I.C.


CARBIDESHANK

STEELSHANK


D07-75B S-985/8 3/8 5/32

16-185916-186316-186816-1872

16-186016-186516-186916-1874

16-186216-186616-187116-1875

16-187716-188116-188616-1890

16-187816-188316-188716-1892

16-188016-188416-188916-1893

16-189516-189916-190416-1908

16-189816-190216-190716-1911

16-189616-190116-190516-1910

16-185816-186716-187616-1885

16-186116-187016-187916-1888

16-189416-190316-191216-1921

16-186416-187316-188216-1891

16-190016-190916-191816-1927

16-189716-190616-191516-1924

16-193316-194216-195116-1960

16-193016-193916-194816-1957

SHANKLENGTH

3"6"9"12"

3"6"9"12"

3"6"9"12"

3"6"9"12"

SHANKLENGTH

SHANKLENGTH

3"6"9"12"

SHANKLENGTH

SHANKLENGTH

3"6"9"12"

SCREWNUMBER

INSERT I.C.

SHANK DIA.

SCREWNUMBER

INSERT I.C.

SHANK DIA.

SCREWNUMBER

INSERT I.C.

SHANK DIA.

SCREWNUMBER

INSERT I.C.

SHANK DIA.

SCREWNUMBER

INSERT I.C.

SHANK DIA.

S-98-S

5/8" MINIMUM BORE

3/4" MINIMUM BORE

7/8" MINIMUM BORE

1" MINIMUM BORE

TOOL GEOMETRY FOR BORING STEEL & TOUGHER APPLICATIONS

INDEXABLE INSERT CCMT 32.51 3/8" I.C.


ITI CARBIDE: HIGH TRANSVERSE RUPTURE STRENGTH

SCREW EDP #

SCREW EDP #

99-1132

SCREW EDP #

SCREW EDP #

99-1132

99-1132

99-1132

SCREW EDP #

99-1132


BORIN

G T

OOLS

19

INTERNAL TOOL INC.


TA

LO

G F

OU

RT

EE

N

SERIES 12


INSERTTHICKNESS

SCREWNUMBER

CARBIDESHANK

STEELSHANK


D11-37 S-90

SHANKLENGTH

INSERT I.C.

5/16 1/4 99-1120 3/323"6" 12-1672 12-1675

SHANK DIA.

SCREW EDP #

SHANK STYLES

12-1660 12-1663 12-166612-1669

7/16" MINIMUM BOREHEAD I.D. ORDER EDP#ORDER EDP# ORDER EDP# INSERT

THICKNESSSCREWNUMBER

CARBIDESHANK

STEELSHANK


D11-43

SHANKLENGTH

INSERT I.C.

12-1690 12-1693

SHANK DIA.

12-1678 12-1681 12-168412-1687


THICKNESSSCREWNUMBER

CARBIDESHANK

STEELSHANK


D11-50

SHANKLENGTH

INSERT I.C.

3/8 12-1708 12-1711

SHANK DIA.

12-1696 12-1699 12-170212-1705


INSERTTHICKNESS

SCREWNUMBER

CARBIDESHANK

STEELSHANK


D11-56

SHANKLENGTH

6"

INSERT I.C.

3"12-1726 12-1729

SHANK DIA.

12-1714 12-171712-1723


SCREWNUMBER

CARBIDESHANK

STEELSHANK


D11-62

SHANKLENGTH

6"

INSERT I.C.

1/2 1/4

3"12-1762 12-1765

SHANK DIA.

12-1750 12-1753 12-175612-1759

12"9"

12-174412-1732 12-173512-1741

12-173812-1747

12-1720

9" 12-1768 12-1771 12-177412-178312-1777 12-178012"


THICKNESS

SCREWNUMBER

CARBIDESHANK

STEELSHANK


D11-68

SHANKLENGTH

6"

INSERT I.C.

5/8

3"12-1798 12-1801

SHANK DIA.

12-1786 12-178912-1795


THICKNESS

SCREWNUMBER

CARBIDESHANK

STEELSHANK


D11-75

SHANKLENGTH

6"

INSERT I.C.

5/8

3"12-1834 12-1837

SHANK DIA.

12-1822 12-1825 12-182812-1831

12"9"

12-181612-1804 12-180712-1813

12-181012-1819

12-1792

9" 12-1840 12-1843 12-184612-185512-1849 12-185212"

S-953/8 1/4 99-1125 3/32

S-951/4 3/32

1/2 S-951/4 3/32

S-95 3/32

1/4 S-95 3/32

S-95 3/321/4

5/8" MINIMUM BORE


C-6

CARBIDE GRADE

TIPRADIUS

.032

.032

.032

TIN COATED

C-2 .015.015

17-1430

ORDER EDP#

17-1440

17-1470

17-145017-1460

TIN COATED

C-2C-6

.015

17-1480

INDEXABLE INSERT CPGT 21.51 1/4" I.C.

3"6"

3"6"

TOOL GEOMETRY FOR BORING ALUMINUM & SOFT MATERIALS

CPGT 21.51INSERT


THE MOST UNIQUE LINE OF CUTTING TOOLS AVAILABLE

99-1125

99-1125

SCREW EDP #

SCREW EDP #

SCREW EDP #

SCREW EDP #

SCREW EDP #

SCREW EDP #

99-1125

99-1125

99-1125

20

BORIN

G T

OOLS

CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL INC.




THICKNESS

SCREWNUMBER

CARBIDESHANK

STEELSHANK


D11-87 S-98

SHANKLENGTH

6"

INSERT I.C.

3/4 3/8 99-1130 5/32

3"12-1870 12-1873

SHANK DIA.

SCREW EDP #

SHANK STYLES

12-1858 12-1861 12-186412-1867

9" 12-1876 12-1879 12-188212-189112-1885 12-188812"

1" MINIMUM BOREHEAD I.D. ORDER EDP#ORDER EDP# ORDER EDP# INSERT

THICKNESS

SCREWNUMBER

CARBIDESHANK

STEELSHANK


D11-100

SHANKLENGTH

6"

INSERT I.C.

3"12-1906 12-1909

SHANK DIA.

12-1894 12-189712-1903

1-1/8" MINIMUM BOREHEAD I.D. ORDER EDP#ORDER EDP# INSERT

THICKNESS

SCREWNUMBER

CARBIDESHANK

STEELSHANK

D11-112

SHANKLENGTH

6"

INSERT I.C.

1"

3"12-1942

SHANK DIA.

12-1930 12-193312-1939

12"9"

12-192412-1912 12-191512-1921

12-191812-1927

12-1900

9" 12-1948 12-195112-1957 12-196012"

S-983/4 3/8 5/32

S-983/8 5/32

SERIES 12

C-6

CARBIDE GRADE

TIPRADIUS

.032

.032

.032

TIN COATED

C-2 .015.015

17-1370

ORDER EDP#

17-1380

17-1410

17-139017-1400

TIN COATED

C-2C-6

.015

17-1420

TOOL GEOMETRY FOR BORING ALUMINUM & SOFTER MATERIALS



CPGT 32.51

ITI CARBIDE: THE MOST VERSATILE CARBIDE AVAILABLE

SCREW EDP #

SCREW EDP #

99-1130

99-1130



21

BORIN

G T

OOLS

INTERNAL TOOL INC.


TA

LO

G F

OU

RT

EE

N

ORDER

EDP#

MIN

HOLEOFFSET

GROOVE

WIDTH

MAX

DEPTH

1/4

5/16

.020

.100

1/4

X

2-1/2

O.A.L.

5/16

X

2-1/2

O.A.L.

.017/.018

.025/.026

.033/.034

.038/.039

.062/.064

.093/.095

SERIES 20

GROOVING TOOLS

3/16

X

2-1/2

O.A.L.

1/8

X

2"

O.A.L.

20-117020-117520-118020-118520-119020-119520-120020-120520-121020-121520-122020-122520-123020-123520-124020-124520-125020-125520-126020-126520-127020-127520-128020-128520-129020-1295

G-032-3G-032-4G-032-6G-047-4G-047-6G-047-8G-064-4G-064-6G-064-8G-064-10G-018-4G-018-6G-018-8G-018-10G-026-4G-026-6G-026-8G-026-10G-031-4G-031-6G-031-8G-031-10G-061-4G-061-6G-061-8G-061-10

1/16

.050

.031/.032

.046/.047

3/16

.0303/32

1/8 .062/.063

.017/.018

.025/.026

.030/.031

.062/.063

.040

.050

.062/.064

SHANK &

ITI CARBIDE

3/161/43/81/43/81/21/43/81/25/81/43/81/25/81/43/81/25/81/43/81/25/81/43/81/25/8

20-130020-130520-131020-131520-132020-132520-133020-133520-134020-134520-135020-135520-135620-135720-135820-136020-136520-137020-137520-138020-138520-139020-139520-140020-140520-141020-141520-142020-1425

1/43/81/25/81/43/81/25/81/43/81/25/83/81/25/81/43/81/23/41/43/81/23/41/23/41"1/23/41"

G-017-4G-017-6G-017-8G-017-10G-025-4G-025-6G-025-8G-025-10G-030-4G-030-6G-030-8G-030-10G-060-6G-060-8G-060-10G-033-4G-033-6G-033-8G-033-12G-038-4G-038-6G-038-8G-038-12G-063-8G-063-12G-063-16G-094-8G-094-12G-094-16

TOOL

ID

ORDER

EDP#

MIN

HOLEOFFSET

GROOVE

WIDTH

MAX

DEPTH

SERIES 20

GROOVING TOOLSOVERALL LENGTH


TOOL

ID

.030/.031


OFFSET

MINHOLE

MAX DEPTH+.050 / -.000

GROOVEWIDTH

2 TYP.

SHANK

SERIES 20 STANDARDSOLID CARBIDEGROOVING TOOL

FOR RETAINING RING GROOVES & INTERNAL RELIEFS.

APPLICATION :

made from

22 ITI CARBIDE: HIGH TRANSVERSE RUPTURE STRENGTH

GROOVE T

OOLS

OVERALL LENGTH

SHANK &

GROOVE TOOLS

CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL INC.

ITI Carbide Cutting ToolsTHE LEADER IN INNOVATION

GROOVE T

OOLS

23

3/8

3/8

X

2-1/2

O.A.L.

20-143020-143520-144020-144520-145020-145520-146020-146520-147020-147520-148020-148520-149020-149520-150020-150520-151020-151520-152020-152520-153020-153520-154020-154520-155020-155520-156020-156520-157020-1575

G-039-4G-039-6G-039-8G-039-12G-039-16G-039-20G-046-4G-046-6G-046-8G-046-12G-046-16G-046-20G-055-4G-055-6G-055-8G-055-12G-055-16G-055-20G-062-4G-062-6G-062-8G-062-12G-062-16G-062-20G-069-4G-069-6G-069-8G-069-12G-069-16G-069-20

1/43/81/23/41"1-1/41/43/81/23/41"1-1/41/43/81/23/41"1-1/41/43/81/23/41"1-1/41/43/81/23/41"1-1/4

.100

.046/.048

.062/.064

SHANK &ORDER

EDP#

MIN

HOLEOFFSET

GROOVE

WIDTH

MAX

DEPTH

SERIES 20

GROOVING TOOLSOVERALL LENGTH


TOOL

ID

ORDER

EDP#TOOL

ID

MIN

HOLE

GROOVE

WIDTH OFFSET MAX

DEPTH

20-158020-158520-159020-159520-160020-160520-161020-161520-162020-162520-163020-163520-164020-164520-165020-165520-166020-166520-167020-167520-168020-168520-169020-169520-170020-170520-171020-171520-172020-172520-173020-173520-174020-174520-175020-175520-1760

1/2

X

3"

O.A.L.

3/8

X

2-1/2

O.A.L.

3/8CONT. .100

1/2.150

.069/.071

1/43/81/23/41"1-1/41/23/41"1/23/41"1/23/41"1-1/41-1/21/23/41"1-1/41-1/21/23/41"1-1/41-1/21/23/41"1-1/41-1/21/23/41"1-1/41-1/2

.087/.089

.093/.095

.125/.127

.093/.095

.125/.127

.156/.158

.187/.189

.250/.252

SHANK &OVERALLLENGTH

G-087-4G-087-6G-087-8G-087-12G-087-16G-087-20G-095-8G-095-12G-095-16G-126-8G-126-12G-126-16G-093-8G-093-12G-093-16G-093-20G-093-24G-125-8G-125-12G-125-16G-125-20G-125-24G-156-8G-156-12G-156-16G-156-20G-156-24G-187-8G-187-12G-187-16G-187-20G-187-24G-250-8G-250-12G-250-16G-250-20G-250-24

.039/.041

.055/.057


OFFSET

MINHOLE

MAX DEPTH+.050 / -.000

GROOVEWIDTH

2 TYP.

SHANK



APPLICATION :

SERIES 20

GROOVING TOOLSITI CARBIDEmade from

GROOVE TOOLS

INTERNAL TOOL INC.


TA

LO

G F

OU

RT

EE

N

ORDER

EDP#

TOOL

ID

MIN

HOLE OFFSETGROOVE

WIDTH


MAX

DEPTH

1/4

5/16

.050

.100

1/4

X

2-1/2

O.A.L.

5/16

X

2-1/2

O.A.L.

.017

.018

SERIES 24

MINBORE

GROOVEWIDTH

2°TYP.

OFFSET

MAX DEPTH


FULL RADIUS GROOVING TOOLS

FULL RADIUSGROOVING TOOLS

APPLICATION : FULL RADIUS GROOVES AND PROFILE WORK.

ITI CARBIDE


.025

.026

.030

.031

.062

.064

.033

.034

.038

.039

.062

.064

.093

.095

ALTINCOATED EDP#

made from

1/43/81/25/81/43/81/25/81/43/81/25/83/81/25/81/43/81/25/83/41/43/81/23/41/23/41"1/23/41"

R-017-4R-017-6R-017-8R-017-10R-025-4R-025-6R-025-8R-025-10R-030-4R-030-6R-030-8R-030-10R-060-6R-060-8R-060-10R-033-4R-033-6R-033-8R-033-10R-033-12R-038-4R-038-6R-038-8R-038-12R-063-8R-063-12R-063-16R-094-8R-094-12R-094-16

24-1300-C24-1305-C24-1310-C24-1315-C24-1320-C24-1325-C24-1330-C24-1335-C24-1340-C24-1345-C24-1350-C24-1355-C24-1356-C24-1357-C24-1358-C24-1360-C24-1365-C24-1370-C24-1372-C24-1375-C24-1380-C24-1385-C24-1390-C24-1395-C24-1400-C24-1405-C24-1410-C24-1415-C24-1420-C24-1425-C

24-130024-130524-131024-131524-132024-132524-133024-133524-134024-134524-135024-135524-135624-135724-135824-136024-136524-137024-137224-137524-138024-138524-139024-139524-140024-140524-141024-141524-142024-1425

ORDER

EDP#

MIN

HOLEOFFSET

GROOVE

WIDTH

MAX

DEPTH

.020

3/16

X

2-1/2

O.A.L.

1/8

X

2"

O.A.L.

24-117024-117524-118024-118524-119024-119524-120024-120524-121024-121524-122024-122524-123024-123524-124024-124524-125024-125524-126024-126524-127024-127524-128024-128524-129024-1295

R-032-3R-032-4R-032-6R-047-4R-047-6R-047-8R-064-4R-064-6R-064-8R-064-10R-018-4R-018-6R-018-8R-018-10R-026-4R-026-6R-026-8R-026-10R-031-4R-031-6R-031-8R-031-10R-061-4R-061-6R-061-8R-061-10

1/16 .031/.032

.046/.047

3/16

.0303/32

1/8 .062/.063

.017/.018

.025/.026

.030/.031

.062/.063

.040

.050

3/161/43/81/43/81/21/43/81/25/81/43/81/25/81/43/81/25/81/43/81/25/81/43/81/25/8

TOOL

ID OVERALL LENGTH

SHANK &


GROOVE T

OOLS

24

CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL INC.


GROOVE T

OOLS MIN

BORE

GROOVEWIDTH

2°TYP.

OFFSET

MAX DEPTH


ORDER

EDP#

TOOL

IDOFFSET

GROOVE

WIDTH

MAX

DEPTH

24-155024-155524-156024-156524-157024-157524-158024-158524-159024-159524-160024-160524-161024-161524-162024-162524-163024-163524-164024-164524-165024-165524-166024-166524-167024-167524-168024-168524-169024-169524-170024-170524-171024-171524-172024-172524-173024-173524-174024-174524-175024-175524-1760

1/2

X

3"

O.A.L.

R-069-4R-069-6R-069-8R-069-12R-069-16R-069-20R-087-4R-087-6R-087-8R-087-12R-087-16R-087-20R-095-8R-095-12R-095-16R-126-8R-126-12R-126-16R-093-8R-093-12R-093-16R-093-20R-093-24R-125-8R-125-12R-125-16R-125-20R-125-24R-156-8R-156-12R-156-16R-156-20R-156-24R-187-8R-187-12R-187-16R-187-20R-187-24R-250-8R-250-12R-250-16R-250-20R-250-24

1/2 .150


.069

.071

.087

.089

.093

.095

.125

.127

ALTINCOATED EDP#

.093

.095

.125

.127

.156

.158

.187

.189

.250

.252

24-1550-C24-1555-C24-1560-C24-1565-C24-1570-C24-1575-C24-1580-C24-1585-C24-1590-C24-1595-C24-1600-C24-1605-C24-1610-C24-1615-C24-1620-C24-1625-C24-1630-C24-1635-C24-1640-C24-1645-C24-1650-C24-1655-C24-1660-C24-1665-C24-1670-C24-1675-C24-1680-C24-1685-C24-1690-C24-1695-C24-1700-C24-1705-C24-1710-C24-1715-C24-1720-C24-1725-C24-1730-C24-1735-C24-1740-C24-1745-C24-1750-C24-1755-C24-1760-C

3/8 3/8

X

2-1/2

O.A.L.

.100

1/43/81/23/41"1-1/41/43/81/23/41"1-1/41/23/41"1/23/41"1/23/41"1-1/41-1/21/23/41"1-1/41-1/21/23/41"1-1/41-1/21/23/41"1-1/41-1/21/23/41"1-1/41-1/2

FULL RADIUS GROOVING TOOLS


24-143024-143524-144024-144224-144524-145024-145524-146024-146524-147024-147524-148024-148524-149024-149524-150024-150524-151024-151524-152024-152524-153024-153524-154024-1545

24-1430-C24-1435-C24-1440-C24-1442-C24-1445-C24-1450-C24-1455-C24-1460-C24-1465-C24-1470-C24-1475-C24-1480-C24-1485-C24-1490-C24-1495-C24-1500-C24-1505-C24-1510-C24-1515-C24-1520-C24-1525-C24-1530-C24-1535-C24-1540-C24-1545-C

R-039-4R-039-6R-039-8R-039-10R-039-12R-039-16R-039-20R-046-4R-046-6R-046-8R-046-12R-046-16R-046-20R-055-4R-055-6R-055-8R-055-12R-055-16R-055-20R-062-4R-062-6R-062-8R-062-12R-062-16R-062-20

.100

3/8

X

2-1/2

O.A.L.3/8

.039

.041

.046

.048

.055

.057

.062

.064

1/43/81/25/83/41"1-1/41/43/81/23/41"1-1/41/43/81/23/41"1-1/41/43/81/23/41"1-1/4


APPLICATION : FULL RADIUS GROOVES AND PROFILE WORK.ITI CARBIDEmade fromSERIES 24

25ON THE WEB: WWW.INTERNALTOOL.COM

ORDER

EDP#TOOL

ID

MIN

HOLEOFFSET

GROOVE

WIDTH


MAX

DEPTH

ALTINCOATED EDP#

MIN

HOLE


HP USER

Rectangle

HP USER

Text Box

missouricarbide.com

INTERNAL TOOL INC.


TA

LO

G F

OU

RT

EE

N

26 ITI CARBIDE AMERICAN MADE

ORDER

EDP# TOOL

IDENTIFICATION

MIN

HOLEOFFSET

GROOVE

WIDTH

MAX

DEPTH

.094 .0501/4

.125 .0605/16

.0803/8

COMBINATION THREAD & GROOVE

SERIES 52

1/4 X 2-1/2 O.A.L.

5/16 X 2-1/2 O.A.L.

3/8 X 2-1/2 O.A.L.

.156

MINHOLE

OFFSET

60°

GROOVE WIDTH

MAXDEPTH

APPLICATION :THREADING & GROOVING WITH THE SAME TOOL.ITI CARBIDE

GROOVE ID

GROOVE OD

THREAD OD

THREAD ID

made from

MULTI-REACH GROOVING TOOLS

SERIES 06

06-1200-C06-1205-C06-1210-C06-1215-C06-1220-C06-1225-C06-1230-C06-1235-C06-1240-C06-1245-C06-1250-C06-1255-C06-1260-C06-1265-C06-1270-C06-1275-C

MINIMUM HOLE

ORDER EDP#TOOL I.D.

SHANKDIAMETER

1/4"

LG-310-032LG-310-063LG-310-094LG-310-125LG-390-032LG-390-063LG-390-094LG-390-125LG-475-032LG-475-063LG-475-094LG-475-125LG-620-032LG-620-063LG-620-094LG-620-125

.060

SHANK LENGTH

4"

GROOVE WIDTH OFFSET

.032

.063

.094

.125

.032

.063

.094

.125

.032

.063

.094

.125

.032

.063

.094

.125

.310

5/16"

3/8"

4"

6"

6"1/2"

.075

.100

.120

.390

.475

.620

CARBIDE SHANKS PROVIDE MAXIMUM RIGIDITY.

ITI CARBIDE APPLICATION : MULTI-REACH GROOVING NO LONGER LIMITED BY NECK LENGTH. ONE TOOL REPLACES A SERIES OF OTHERS.

WIDTHS CAN BE SIZED TO YOUR SPECIFICATIONS

ALTINCOATED EDP#

06-120006-120506-121006-121506-122006-122506-123006-123506-124006-124506-125006-125506-126006-126506-127006-1275

made from

GROOVE T

OOLS

.500

.7501.000.500.7501.000.500.7501.000

52-110052-110552-111052-111552-112052-112552-113052-113552-1140

TG-240-500TG-240-750TG-240-1000TG-310-500TG-310-750TG-310-1000TG-360-500TG-360-750TG-360-1000

GROOVE WIDTH CAN BE MODIFIED NO EXTRA CHARGE

MINIMUM HOLE

MAX DEPTH

27-1300

27-1305

27-1310

.500

.562

.625

O-096-8

O-141-9

O-144-10

ORDER EDP#

TOOL ID

.375

.250

SHANK

1/4 X 2-1/2 O.A.L.

3/8 X 2-1/2O.A.L.

27-1315

27-1320

27-1325

O-174-12

O-208-13

O-241-15

.750

.812

.940

OFFSET

SERIES 27

.115

.100

GROOVE WIDTH.096/.098

.141/.143

.144/.146

.174/.176

.208/.210

.241/.243

CORNER RADIUS.010/.020

.035/.045

.035/.045

.010/.020

.035/.045

.035/.045

OFFSET

5° TYP.

RADIU S TYP.


MINIMUM HOLE

MAXIMUM DEPTH

O-RING GROOVE TOOLSAPPLICATION : O-RING GROVING WITH TAPERED SIDESITI CARBIDE

ALTINCOATED #

27-1300-C

27-1305-C

27-1310-C

27-1315-C

27-1320-C

27-1325-C

made from


CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL INC.


ORDER

EDP#

MIN

HOLEOFFSET

GROOVE

WIDTH

MAX

DEPTH

SERIES 20

METRIC GROOVING TOOLSITI CARBIDEmade from

TOOL

ID


OFFSET

MINHOLE

MAX DEPTH+.050 / -.000

GROOVEWIDTH

2 TYP.

SHANK



APPLICATION :

20-992020-993020-994020-995020-996020-997020-998020-998220-998520-999020-9995

.5 MM (.0197)

.9 MM (.0354)1.1 MM (.0433)1.3 MM (.0512)1.85 MM (.0728)2.15 MM (.0847)2.65 MM (.1044)3.0 MM (.1182)3.0 MM (.1182)4.0 MM (.1576)6.0 MM (.2364)

6.5

(.250)

13 MM13 MM13 MM13 MM13 MM13 MM13 MM13 MM19 MM19 MM19 MM

1/4 X 2-1/2O.A.L.

G-.5-13G-.9-13G-1.1-13G-1.3-13G-1.85-13G-2.15-13G-2.65-13G-3.0-13G-3.0-19G-4.0-19G-6.0-19

9.5

(.375)

12.7

(.500)

27

.050

.100

3/8 X 2-1/2O.A.L.

.150 1/2 X 3"O.A.L.

.070

.093

.103

.125

.139

.187

.210

.250

.275

.375

O-RING DOVETAIL GROOVERS BOTTOM RADIUS

EDPNUMBER

O-RING SIZE

DEPTH OF CUT

WIDTH

53-400053-400553-401053-401553-402053-402553-403053-403553-404053-4045

TOP RADIUS

.040

.060

.065

.082

.085

.130

.140

.173

.180

.240

.051

.075

.082

.102

.112

.154

.172

.212

.232

.317

.015

.015

.015

.031

.031

.031

.031

.062

.062

.094

.005

.010

.010

.010

.010

.015

.015

.015

.015

.020

1/8 x 2.01/8 x 2.01/8 x 2.03/16 x 2.53/16 x 2.51/4 x 2.51/4 x 2.51/4 x 2.55/16 x 2.55/16 x 2.5

SERIES 53

APPLICATION :

ITI CARBIDE

SHANK SIZE

TOP RADIUS

BOTTOM RADIUS

A FLAT ON BOTH SIDES LET YOU FLIP THETOOL TO CUT BOTH SIDES OF THE SLOT

DEPTH OF CUT

WIDTH

24°USED TO CUT-TURN 24° O-RING DOVETAILS.THEY CUT WITH BOTH TOP & BOTTOM RADIUS.

MILLING STYLE O'RING TOOLS ARE ON PAGE 91

made from

GROOVE T

OOLS



+/- .0254mm


INTERNAL TOOL INC.


TA

LO

G F

OU

RT

EE

N

MAX-GROOVE GROOVING TOOLSORDER

EDP#

TOOL

IDENTIFICATIONMIN

HOLEOFFSET

GROOVE WIDTH SHANK

MAX

DEPTH

1/4

5/16

3/8

.050

.100

.100

1/4

X

2-1/2

O.A.L.

5/16

X

2-1/2

O.A.L.

3/8

X

2-1/2

O.A.L.

.017/.018

.025/.026

.030/.031

.033/.034

.038/.039

.062/.064

.093/.095

.039/.041

.046/.048

.069/.071

.087/.089

ALTIN COATED MAX-GROOVE GROOVING TOOLS

.062/.064

.093/.095

.125/.127

.125/.127

.055/.057

.062/.064

SERIES 22

MINHOLE

GROOVEWIDTH


MAXDEPTH +.050 /- .000

OFFSET +.020 / -.000 STRONGER ELLIPTICALGROUND NECK

APPLICATION :

Max-groove is the Ultimate in grooving tools. Featuring an ellipticalneck for greater strength, a special top rake for maximumshearing action with a better finish, and a ALTINcoating for a longer life.Max-Groove out performs andoutlasts our competitorsgroove tools two to one.

FOR INTERNAL GROOVING AND RELIEVINGITI CARBIDE

ALTIN: THE VERY LATEST IN

HIGH PERFORMANCE COATING

made from

MG-25-017-250MG-25-017-375MG-25-017-500MG-25-017-625MG-25-025-250MG-25-025-375MG-25-025-500MG-25-025-625MG-25-030-250MG-25-030-375MG-25-030-500MG-25-030-625MG-25-063-250MG-25-063-375MG-25-063-500MG-25-063-625MG-25-094-250MG-25-094-375MG-25-094-500MG-25-094-625MG-25-125-250MG-25-125-375MG-25-125-500MG-25-125-625MG-31-033-250MG-31-033-375MG-31-033-500MG-31-033-625MG-31-038-250MG-31-038-375MG-31-038-500MG-31-038-625MG-31-063-500MG-31-063-750MG-31-063-1000MG-31-094-500MG-31-094-750MG-31-094-1000MG-31-125-500MG-31-125-750MG-31-125-1000

1/43/81/25/81/43/81/25/81/43/81/25/81/43/81/25/81/43/81/25/81/43/81/25/81/43/81/25/81/43/81/25/81/23/41"1/23/41"1/23/41"

22-110022-110522-111022-111522-112022-112522-113022-113522-114022-114522-115022-115522-116022-116522-117022-117522-118022-118522-119022-119522-120022-120522-121022-121522-122022-122522-123022-123522-124022-124522-125022-125522-126022-126522-127022-127522-128022-128522-129022-129522-1300

22-130522-131022-131522-132022-132522-133022-133522-134022-134522-135022-135522-136022-136522-137022-137522-138022-138522-139022-139522-140022-140522-141022-141522-142022-142522-143022-143522-144022-144522-145022-145522-146022-146522-147022-147522-1480

MG-37-039-250MG-37-039-375MG-37-039-500MG-37-039-750MG-37-039-1000MG-37-039-1250MG-37-046-250MG-37-046-375MG-37-046-500MG-37-046-750MG-37-046-1000MG-37-046-1250MG-37-055-250MG-37-055-375MG-37-055-500MG-37-055-750MG-37-055-1000MG-37-055-1250MG-37-063-250MG-37-063-375MG-37-063-500MG-37-063-750MG-37-063-1000MG-37-063-1250MG-37-069-250MG-37-069-375MG-37-069-500MG-37-069-750MG-37-069-1000MG-37-069-1250MG-37-087-250MG-37-087-375MG-37-087-500MG-37-087-750MG-37-087-1000MG-37-087-1250

ORDER

EDP#

TOOL

IDENTIFICATIONMIN

HOLEOFFSET

GROOVE WIDTH SHANK

MAX

DEPTH

1/43/81/23/41"1-1/41/43/81/23/41"1-1/41/43/81/23/41"1-1/41/43/81/23/41"1-1/41/43/81/23/41"1-1/41/43/81/23/41"1-1/4

MAX-GROOVE GROOVING TOOLS

28

CONTINUED ON NEXT PAGE

GROOVE T

OOLS

INTERNAL TOOL THE LEADER IN INNOVATION

CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL INC.


GROOVE T

OOLS

29

ORDER

EDP#

TOOL

IDENTIFICATIONMIN

HOLEOFFSET

GROOVE

WIDTHSHANK

MAX

DEPTH

1/2

X

3"

3/8

X

2-1/2

3/8CONT.

.100

1/2 .150

.093/.095

.125/.127

.093/.095

.125/.127

.156/.158

.187/.189

.250/.252

22-148522-149022-149522-150022-150522-151022-151522-152022-152522-153022-153522-154022-154522-155022-155522-156022-156522-157022-157522-158022-158522-159022-159522-160022-160522-161022-161522-162022-162522-163022-163522-164022-164522-165022-165522-1660

.062/.064

1/23/41"1/23/41"1/23/41"1-1/41-1/21/23/41"1-1/41-1/21/23/41"1-1/41-1/21/23/41"1-1/41-1/21/23/41"1-1/41-1/21/23/41"1-1/41-1/2

MG-37-094-500MG-37-094-750MG-37-094-1000MG-37-125-500MG-37-125-750MG-37-125-1000MG-50-063-500MG-50-063-750MG-50-063-1000MG-50-063-1250MG-50-063-1500MG-50-094-500MG-50-094-750MG-50-094-1000MG-50-094-1250MG-50-094-1500MG-50-125-500MG-50-125-750MG-50-125-1000MG-50-125-1250MG-50-125-1500MG-50-156-500MG-50-156-750MG-50-156-1000MG-50-156-1250MG-50-156-1500MG-50-187-500MG-50-187-750MG-50-187-1000MG-50-187-1250MG-50-187-1500MG-50-250-500MG-50-250-750MG-50-250-1000MG-50-250-1250MG-50-250-1500


OFFSET +.020 / -.000 STRONGER ELLIPTICALLYGROUND NECK

APPLICATION :

Max-groove is the Ultimate in grooving tools. Featuring an ellipticalneck for greater strength, a special top rake for maximumshearing action with a better finish, and a ALTINcoating for a longer life.Max-Groove out performs andoutlasts our competitorsgroove tools two to one.

FOR INTERNAL GROOVING AND RELIEVING

ALTIN COATED MAX-GROOVE GROOVING TOOLS

MAX-GROOVE GROOVING TOOLS


MINHOLE

GROOVEWIDTH

MAXDEPTH +.050 /- .000


INTERNAL TOOL INC.


TA

LO

G F

OU

RT

EE

N

30 THE MOST UNIQUE LINE OF CUTTING TOOLS AVAILABLE

.039

.033

.018

MAX DEPTH

ORDER EDP#

.200

.300

.400

.500

.600

.700

.200

.300

.400

.500

.600

.700

.200

.300

.400

.500

.600

.700

.200

.300

.400

.500

.600

.700

.200

.300

.400

.500

.600

.700

.029

.032

GROOVE WIDTH

GROOVE WIDTH

MINIMUMHOLE IS .185

MAX DEPTH

OFFSET IS .060

QUICK CHANGE

GROOVING TOOLS

42-700042-700542-701042-701542-702042-702542-703042-703542-704042-704542-705042-705542-706042-706542-707042-707542-708042-708542-709042-709542-710042-710542-711042-711542-712042-712542-713042-713542-714042-7145

ALTINCOATED EDP#


ALL TOOLS HAVE A GROUND ANGLE ON THE SHANKWHICH LOCKS IN PLACE AGAINST A LOCATING PIN,MAINTAINING AN EXACT RADIAL AND AXIAL POSITION

HOLDERS ARE AVAILABLE WITH3/8, 1/2, 5/8, & 3/4 SHANK SIZES.

STANDARD STYLE3/8" SHANK EDP# 42-90001/2" SHANK EDP# 42-90055/8" SHANK EDP# 42-90103/4" SHANK EDP# 42-901522 MM SHANK EDP# 42-9020

SERIES 42SOLID CARBIDE QUICK CHANGEGROOVING TOOL

GROOVE T

OOLS


Quick Change Tools AreAlso Available For Boring,Threading, Profiling AndFace Grooving. See Pages12,42,43 And,39.

QUICK CHANGE GROOVING TOOLS

CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL INC.


.062

.048

.046

.040

.056


.200

.300

.400

.500

.600

.700

.200

.300

.400

.500

.600

.700

.200

.300

.400

.500

.600

.700

.200

.300

.400

.500

.600

.700

.200

.300

.400

.500

.600

.700

42-715042-715542-716042-716542-717042-717542-718042-718542-719042-719542-720042-720542-721042-721542-722042-722542-723042-723542-724042-724542-725042-725542-726042-726542-727042-727542-728042-728542-729042-7295


MAX DEPTH

ORDER EDP#

GROOVE WIDTH

ALTINCOATED EDP#

QUICK CHANGE

GROOVING TOOLS

HOLDERS ARE AVAILABLE WITH3/8, 1/2, 5/8, & 3/4 SHANK SIZES.

COOLANT HOLE STYLE3/8" SHANK EDP #42-95001/2" SHANK EDP #42-95055/8" SHANK EDP #42-95103/4" SHANK EDP #42-951522 MM SHANK EDP #42-9520

EXTRA SCREW EDP# 42-8888

GROOVE WIDTH

MINIMUMHOLE IS .185

MAX DEPTH

OFFSET IS .060

ALL TOOLS HAVE A GROUND ANGLE ON THE SHANKWHICH LOCKS IN PLACE AGAINST A LOCATING PIN,MAINTAINING AN EXACT RADIAL AND AXIAL POSITION

31

GROOVE T

OOLS

QUICK CHANGE GROOVING TOOLS

SERIES 42SOLID CARBIDE QUICK CHANGEGROOVING TOOL


Quick Change Tools AreAlso Available For Boring,Threading, Profiling AndFace Grooving. See Pages12,42,43 And,39.


HP USER

Rectangle

HP USER

Text Box

missouricarbide.com

INTERNAL TOOL INC.


TA

LO

G F

OU

RT

EE

N

ORDER

EDP#OFFSET

GROOVE

WIDTH

MAX

DEPTH


ALTINCOATED EDP#

1/4

.030

.031

.062

.064

5/16

.030

.031

.062

.064

.093

.095

3/8

.030

.031

.046

.048

.080

.150

1/4

X

2-1/2

O.A.L.

5/16

X

2-1/2

O.A.L.

1/43/81/21/43/81/21/43/81/2 3/41"

1/43/81/23/41"

3/81/23/41"

3/81/23/41"

3/81/23/41"

121-1000121-1005121-1010121-1015121-1020121-1025121-1030121-1035121-1040121-1045121-1050121-1055121-1060121-1065121-1070121-1075121-1080121-1085121-1090121-1095121-1100121-1105121-1110121-1115121-1120121-1125121-1130121-1135

121-1000-C121-1005-C121-1010-C121-1015-C121-1020-C121-1025-C121-1030-C121-1035-C121-1040-C121-1045-C121-1050-C121-1055-C121-1060-C121-1065-C121-1070-C121-1075-C121-1080-C121-1085-C121-1090-C121-1095-C121-1100-C121-1105-C121-1110-C121-1115-C121-1120-C121-1125-C121-1130-C121-1135-C

ORDER

EDP#OFFSET

GROOVE

WIDTH

MAX

DEPTH


ALTINCOATED EDP#

.062

.064

.062

.064

.093

.095

3/8

.187

.189

.150.093

.095

.125

.127

.125

.127

1/2 .200

3/8

X

2-1/2

O.A.L.

3/8

X

2-1/2

O.A.L.

1/2

X

3

O.A.L.

1/23/41"

3/81/23/41"

3/81/23/41"

1/23/41"

1-1/4"1/23/41"

1-1/4"1/23/41"

1-1/4"1/23/41"

1-1/4"

121-1140121-1145121-1150121-1155121-1160121-1165121-1170121-1175121-1180121-1185121-1190121-1195121-1200121-1205121-1210121-1215121-1220121-1225121-1230121-1235121-1240121-1245121-1250121-1255121-1260121-1265121-1270121-1275


.150

SERIES 121

DEEP SLOTTING GROOVE TOOLS

DEEP SLOTTING GROOVE TOOLS


3/8

GR

OO

VE

TO

OL

S

32

OFFSET

GROOVE WIDTH

MINHOLE

MAX DEPTH

MIN

HOLE MIN

HOLE

OVER 6000 TOOLS NOW AVAILABLE

FOR DEEPER RETAINING RING GROOVES & INTERNALRELIEFS.

APPLICATION :

CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL INC.


GR

OO

VE

TO

OL

S

ORDER

EDP#OFFSET

GROOVE

WIDTH

MAX

DEPTH


ALTINCOATED EDP#

1/4

.030

.031

.062

.064

5/16

.030

.031

.062

.064

.093

.095

3/8

.030

.031

.046

.048

.080

.150

1/4

X

2-1/2

O.A.L.

5/16

X

2-1/2

O.A.L.

1/43/81/21/43/81/21/43/81/2 3/41"

1/43/81/23/41"

3/81/23/41"

3/81/23/41"

3/81/23/41"

123-1000123-1005123-1010123-1015123-1020123-1025123-1030123-1035123-1040123-1045123-1050123-1055123-1060123-1065123-1070123-1075123-1080123-1085123-1090123-1095123-1100123-1105123-1110123-1115123-1120123-1125123-1130123-1135


ORDER

EDP#OFFSET

GROOVE

WIDTH

MAX

DEPTH


ALTINCOATED EDP#

.062

.064

.062

.064

.093

.095

3/8

.187

.189

.150.093

.095

.125

.127

.125

.127

1/2 .200

3/8

X

2-1/2

O.A.L.

3/8

X

2-1/2

O.A.L.

1/2

X

3

O.A.L.

1/23/41"

3/81/23/41"

3/81/23/41"

1/23/41"

1-1/4"1/23/41"

1-1/4"1/23/41"

1-1/4"1/23/41"

1-1/4"

123-1140123-1145123-1150123-1155123-1160123-1165123-1170123-1175123-1180123-1185123-1190123-1195123-1200123-1205123-1210123-1215123-1220123-1225123-1230123-1235123-1240123-1245123-1250123-1255123-1260123-1265123-1270123-1275


.150

3/8

DEEP SLOTTING FULL RADIUS GROOVE TOOLS


DEEP SLOTTING FULL RADIUS GROOVE TOOLS

33

MAX DEPTHOFFSET

GROOVE WIDTH

MINHOLE

FULLRADIUS

MIN

HOLE

MIN

HOLE

SERIES 123

ITI CARBIDE: TESTED AND PROVEN TO BE THE BEST

FOR DEEPER RETAINING RING GROOVES & INTERNALRELIEFS.

APPLICATION :

INTERNAL TOOL INC.


TA

LO

G F

OU

RT

EE

N

MAXIM

UM DEPTH

WIDTH

OFFSET

RADIU

S SHANK SID

ERADIU

S FRONT SID

EFULL R

ADIUS

YES O

R NO ?

Quote in

quanite

s of ?

THE M

ORE Y

OU B

UY

THE C

HEAPER T

HEY G

ET

INTERNAL

SH

AN

K D

IAM

ET

ER

TRY T

O K

EEP S

AME S

IZE

AS O

R LARGER

THAN T

HE H

EAD

OV

ER

AL

L L

EN

GT

H If n

ot su

re le

ave

blank

we w

ill quote sta

ndard

MA

JO

R D

IAM

ET

ER

Try to

keep sa

me size

as sh

ank o

r smalle

r

INT

ER

NA

L T

OO

L

DRAWN BY:

REV:

TOOL N

UMBER:

DATE:

TOLE

RANCE U

NLE

SS

OTHERWISE SPECIFIED

.X = +

/- 1/32

.XX = +/- .0

10

.XXX = +/- .0

02

.XXXX = /- .0

005

ANGLES +

/- 0.15°

REVISIONS:

YOUR COMPANY NAME:

CONTACT :

PHONE:

FAX:

YOUR DISTRIBUTOR:

QUANITY:

Sim

ply m

ake

a co

py

fill in th

e in

form

atio

n below and fa

x or e

mail to

us. fa

x # 909-392-2627

we will q

uote as so

on as p

ossib

le. IN

FO@

internalto

ol.co

m

34

SPECIAL GROOVING TOOLS


GR

OO

VE

TO

OL

S

mailto:[email protected]


HP USER

Rectangle

HP USER

Text Box

missouricarbide.com

CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL INC.


ORDER

EDP# TOOL I.D. INC.

ANGLE

30°

SERIES 39

EX-30-DBL

EX-60-DBL

EX-90-DBL

EX-120-DBL

39-1000

39-1005

39-1010

39-1015

.216

EXTERNAL THREAD / CHAMFER TOOLS

60°

90°

WIDTH TYPE

120°

DBLANGLE

DBLANGLE

DBLANGLE

DBLANGLE

DEPTH

FOUR

ANGLES

TO

CHOOSE

FROM

WIDTH DEPTH

3/8"

.250

.102 .190

.187 .187

.187 .108

2-1/2"

OVERALL

LENGTH

SERIES 39

39-740039-741039-742039-7430

ORDER

EDP#

TO FIT IN

THIS SIZE SLOT

1/2" SQUARE5/8" SQUARE3/4" SQUARE1" SQUARE

HOLDERS

TO FIT IN SLOT

3/8 BORE THROUGH

TWO SET

SCREWS ON TOP

ORDER

EDP# TOOL I.D.

SERIES 39

EX-030-RET

EX-035-RET

EX-041-RET

EX-047-RET

EX-056-RET

EX-068-RET

39-6000

39-6005

39-6010

39-6015

39-6020

39-6025

.075

EXTERNAL GROOVE TOOLSWIDTH DEPTH

DEPTH

.125

.130

.041 / .042

.072

.090

.095

.035 / .036

.030 / .031

.047 / .049

.056 / .057

.068 / .071

3/8 SHANK

2-1/2"

OVERALL

LENGTH

WIDTH

3/8 X 2-1/2 O.A.L.

5/16 X 2-1/2 O.A.L.

1/4 X 2-1/2 O.A.L.

1/2 X 3" O.A.L.

3/16 X 2-1/2 O.A.L.

ORDER

EDP#

TOOL

IDENTIFICATIONMIN

HOLE

NECK

DIA. FLAT

WIDTH

MAX

DEPTH

LA-115-500LA-115-750LA-175-750LA-175-1000LA-240-750LA-240-1250LA-300-750LA-300-1250LA-360-750LA-360-1250LA-490-1000LA-490-1500

43-200043-200543-201043-201543-202043-202543-203043-203543-204043-204543-205043-2055

.030 .500.750.7501.000.7501.250.7501.250.7501.2501.0001.500

.075.115

.125.175

.170.240

.210.300

.250.360

.350.490

SERIES 43

1/8 X 2" O.A.L.

MAXDEPTH

NECK DIA. MINHOLE


FLATWIDTH

90°

LATHE I.D. CHAMFER TOOLS APPLICATION : INSIDE CHAMFERS

CHAMFER LENGTH

ITI CARBIDE

.030

.030

.030

.030

.030

CHAMFER

LENGTH

.040

.050

.070

.090

.110

.140

made from

GR

OO

VE

TO

OL

S





INTERNAL TOOL INC.


TA

LO

G F

OU

RT

EE

N

.640 MINIMUM BOREHEAD I.D. ORDER EDP#ORDER EDP# ORDER EDP# INSERT

THICKNESS

SCREWNUMBER

CARBIDESHANK

STEELSHANK


G-640 S-16-S

SHANKLENGTH

6"

INSERT I.C.

1/2 3/8 99-1155 9/64

3"26-1120 26-1125

SHANK DIA.

SCREW EDP #

SHANK STYLES

26-1100 26-1105 26-111026-1115

9" 26-1130 26-1135 26-114026-115526-1145 26-115012"

.750 MINIMUM BOREHEAD I.D. ORDER EDP#ORDER EDP# ORDER EDP#

SCREWNUMBER

CARBIDESHANK

STEELSHANK


G-750

SHANKLENGTH

6"

INSERT I.C.

5/8

3"

26-1180 26-1185

SHANK DIA.

SHANK STYLES

26-1160 26-1165 26-117026-1175

9" 26-1190 26-1195 26-120026-121526-1205 26-121012"

LAY-DOWN STYLE INSERT GROOVE TOOLS

CARBIDE GRADE

.031

.031

.047

C-2 UNCOATED TIN COATED

.047

.062

ORDER EDP#

SERIES 26

S-163/8 9/64

GROOVE WIDTH

.078

.062

.078.094.094.097

.125

.125

.097



C-2 UNCOATED

TIN COATED C-2 UNCOATED TIN COATED



SERIES 26



26-170026-173526-170526-174026-171026-174526-171526-175026-172026-175526-172526-176026-173026-1765

CUTTING DEPTH

.046

.046

.062

.062

.062

.062

.078

.078

.078

.078

.070

.070

.050

.050

SCREW EDP #

99-1155

INSERTTHICKNESS

NOTICE: INSERT GROOVING BARS ARE MADE TO ORDER; PLEASE CALL FOR DELIVERY TIME,


GR

OO

VE

TO

OL

S

36

CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL INC.


SCREW #

BHF-0203SBHF-0203BBHF-0306RBFX-0410RS-90S-95S-98S-98-SS-6S-8S-11S-16-SS-16BHF-0308RBFTX-02506

99-110099-110599-111099-111599-112099-112599-113099-113299-113599-114599-115099-115599-116099-116599-1170

ORDER

EDP#

REPLACEMENT HEADS

ORDER

EDP#MIN BORE INSERT I.C.

SHANK

DIA.

T11-31T11-37T11-43T11-50T11-56T11-62T11-68T11-75T11-87T11-10T11-11

5/163/87/161/29/165/811/163/47/81"1-1/8

11 DEGREE TRIANGLESERIES 40

HEAD I.D.

40-111040-111540-112040-112540-113040-113540-114040-114540-115040-115540-1160

INSERT

THICKNESS

1/45/163/83/81/21/25/85/83/43/41"

TBGP-520TPGP-630TPGP-630TPGG-22YLTPGG-22YLTPGG-22YLTPGG-22YLTPGG-22YLTPGG-33YLTPGG-33YLTPGG-33YL

ORDER


SHANK

DIA.

D07-37D07-43D07-50D07-56D07-62D07-62BD07-68D07-68BD07-75D07-75BD07-87D07-10D07-11

3/87/161/29/165/85/811/1611/163/43/47/81"1-1/8

7 DEGREE DIAMONDHEAD I.D.

40-116540-117040-117540-118040-118540-118740-119040-119240-119540-119740-120040-120540-1210

INSERT

THICKNESS

5/163/83/81/21/21/25/85/85/85/83/43/41"

ORDER


SHANK

DIA.

D11-37D11-43D11-50D11-56D11-62D11-68D11-75D11-87D11-10D11-11

3/87/161/29/165/811/163/47/81"1-1/8

11 DEGREE DIAMONDHEAD I.D.

40-121540-122040-122540-123040-123540-124040-124540-125040-125540-1260

INSERT

THICKNESS

5/163/83/81/21/25/85/83/43/41"

ORDER

EDP#MIN BORE I.C.

SHANK

DIA.

T001T002T003T003.5T004T005T006T007T008

.236

.307

.354

.390

.470

.625

.640

.7501.000

LAY DOWN STYLETHREADING TOOLS

HEAD I.D.

40-126540-127040-127540-127740-128040-128540-129040-129540-1300

3/161/45/165/163/81/21/25/83/4

ORDER

EDP#MIN BORE I.C.SHANK

DIA.

G-640G-750

.640

.750

LAY DOWN STYLEGROOVING TOOLS

HEAD I.D.

40-130540-1310

1/25/8

3/83/8

5/323/163/161/41/41/43/83/83/8

5/323/163/161/41/41/41/41/43/83/83/8

1/163/323/321/81/81/81/81/83/163/163/16

1/41/41/41/41/43/81/43/81/43/83/83/83/8

3/323/323/323/323/325/323/325/323/325/325/325/325/32

CCMT-21.51CCMT-21.51CCMT-21.51CCMT-21.51CCMT-21.51CCMT-32.51CCMT-21.51CCMT-32.51CCMT-21.51CCMT-32.51CCMT-32.51CCMT-32.51CCMT-32.51

CPGT-21.51CPGT-21.51CPGT-21.51CPGT-21.51CPGT-21.51CPGT-21.51CPGT-21.51CPGT-32.51CPGT-32.51CPGT-32.51

1/41/41/41/41/41/41/43/83/83/8

3/323/323/323/323/323/323/325/325/325/32

SERIES 40

SERIES 40

SERIES 40

SERIES 40

OVER 3000 TOOLS NOW AVAILABLE 37

SCREWS

SERIES 99

INTERNAL TOOL INC.


TA

LO

G F

OU

RT

EE

N

38

SB-125SB-187SB-250SB-312SB-375SB-437SB-500SB-125-5SB-187-5SB-250-5SB-312-5SB-375-5

ORDER

EDP#

SERIES 70

SPLIT

LENGTH

2"

2-1/2

2-1/2

2-1/2

2-1/2

3"

ORDER

EDP#

TOOL

IDENTIFICATION

SERIES 70

SPLIT

LENGTH DIAMETER

OVERALL

LENGTH

SP-125-SGL

SP-187-SGL

SP-250-SGL

SP-312-SGL

SP-375-SGL

SP-500-SGL

70-1100

70-1105

70-1110

70-1115

70-1120

70-1125

1/8

3/16

1/4

5/16

3/8

1/2

1-1/2"

2"

2"

2"

2"

2-1/2"

DOUBLE END SPLIT BLANKS

SINGLE END SPLIT BLANKSOVERALLLENGTH

SPLITLENGTH

OVERALLLENGTH

SPLITLENGTH

ALL GROUND WITHSET SCREW FLATON TOP

LONG LENGTH SINGLE END SPLIT BLANKS

ORDER

EDP#

SPLIT

LENGTH

3/8 4"

4"

4"

4"

6"

6"

3/8

3/8

1/2

1/2

5/8

SERIES 70

SPLIT BLANKS

ALL GROUND WITHSET SCREW FLATON TOP

ALL GROUND WITH SET SCREW FLAT ON TOP

APPLICATION :A BLANK THAT THE USER CAN GRIND INTO THEIR OWN SPECIAL TOOL.

OVERALL LENGTH

1/4

5/16

3/8

1/2

1/2

5/8

1/8

3/16

1/4

5/16

3/8

1/2

1/4

5/16

3/8

1/2

1/2

5/8

70-1200

70-1205

70-1210

70-1215

70-1220

70-1225

SP-125-DBL

SP-187-DBL

SP-250-DBL

SP-312-DBL

SP-375-DBL

SP-500-DBL

DIAMETER TOOL

IDENTIFICATION

OVERALL

LENGTH

70-1400

70-1405

70-1410

70-1415

70-1420

70-1425

1/8

3/16

1/4

5/16

3/8

1/2

TOOL

IDENTIFICATIONOVERALL

LENGTH

SP-125-LNG

SP-187-LNG

SP-250-LNG

SP-312-LNG

SP-375-LNG

SP-500-LNG

DIAMETER

ITI CARBIDE

ITI CARBIDE

ITI CARBIDE

APPLICATION :A DOUBLE END BLANK THAT THE USER CAN GRIND INTO THEIR OWN SPECIAL TOOL.

APPLICATION :A LONG LENGTH BLANK THAT THE USERCAN GRIND INTO THEIR OWN SPECIAL TOOL.

ORDER

EDP#BUSHING

ID

SERIES 94

INSIDE

DIAMETER

O.A.L.

LENGTH

OUTSIDE

DIAMETER

1/2

5/8 1-1/4

SPLIT BUSHINGS

1-1/4

1/4" WIDE KNURLED HEAD FOR BETTER GRIP

SET SCREW FLAT

APPLICATION :USED TO HOLD OUR BORING & GROOVING TOOLS

94-110094-110594-111094-111594-112094-112594-113094-113594-114094-114594-115094-1155

1/83/161/45/163/87/161/21/83/161/45/163/8

SPLITLENGTH


made from

made from

made from

5/8" DIA FOR USE IN HARDINGE TYPEHOLDERS

1/2" DIA FOR USE IN CRITERION TYPEHEADS

CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL INC.


SINGLE END FACE / ODGROOVE TOOLS

73-590073-595073-600073-600573-601073-601573-602073-602573-603073-6035

GROOVE DEPTH

GROOVE WIDTH

.017

.025

.032

.063

.094

.125

.187

.250

.312

.370

.040

.065

.095

.180

.250

.280

.300

.375

.500

.600

FULL RADIUSRIGHT HAND

SERIES 73

73-490073-495073-500073-500573-501073-501573-502073-502573-503073-5035

.017

.025

.032

.063

.094

.125

.187

.250

.312

.370

.040

.065

.095

.180

.250

.280

.300

.375

.500

.600

RIGHT HANDSQUARE NOSE

3/8

1/4

MIN

DIA.

3/8

1/4

MIN

DIA.

GROOVE DEPTH

GROOVE WIDTH

APPLICATION : SIMILAR TO ABOVE EXCEPT SINGLE END.LONGER SHANKS WITH LARGER DIAMETERSAND GREATER DEPTHS OF CUT.CAN ALSO BE USED FOR OD GROOVING.

SHANK SIZE(min groove dia.)

GROOVE WIDTH

GROOVE DEPTH

OVERALLLENGTH IS 2-1/2

TOOLS ARE ROUND SHANK AND CAN BE HELD IN A COLLET BUT FOREASE OF USE AND FASTER TOOL CHANGES WE RECOMMENDOUR SERIES 98 HOLDER SHOWN ON PAGE 14

ORDER

EDP#

73-700073-702073-7030

GROOVE DEPTH

GROOVE WIDTH

.094

.125

.187

.325

.400

.500

PART-OFF NOSE

3/8

1/4

MIN

DIA.


73-749073-749573-750073-750573-751073-751573-752073-752573-753073-7535

73-7900-C73-7950-C73-8000-C73-8005-C73-8010-C73-8015-C73-8020-C73-8025-C73-8030-C73-8035-C

ORDER EDP#

RIGHT HAND TOOL

LEFT HAND TOOL

LEFT HAND TOOL

min groove dia. is .250

PART-OFF TOOL

10°

RIGHT HAND TOOL

73-4900-C73-4950-C73-5000-C73-5005-C73-5010-C73-5015-C73-5020-C73-5025-C73-5030-C73-5035-C

73-7490-C73-7495-C73-7500-C73-7505-C73-7510-C73-7515-C73-7520-C73-7525-C73-7530-C73-7535-C

73-5900-C73-5950-C73-6000-C73-6005-C73-6010-C73-6015-C73-6020-C73-6025-C73-6030-C73-6035-C

73-790073-795073-800073-800573-801073-801573-802073-802573-803073-8035

73-7000-C73-7020-C73-7030-C

SERIES 42

ORDER

EDP#

GROOVEWIDTH

GROOVEWIDTH

GROOVE DEPTH

GROOVEDEPTH

60 OR 90DEGREEI NC.

GROOVEDEPTH

GROOVE WIDTH

.017

.025

.032

.063

.094

.125

.040

.065

.080

.150

.200

.200

ORDER

EDP#GROOVE DEPTH

GROOVE WIDTH

.017

.025

.032

.063

.094

.125

.040

.065

.080

.150

.200

.200

ORDER

EDP#

42-400042-4500

INCLUDED ANGLE

60°90°

FACE GROOVERS

SHANK SIZE IS 3/16"

SQUARE NOSE

FULL RADIUS NOSE

DOUBLE ANGLE

SHANK SIZE IS 3/16"WILL CUT ANY FACE GROOVELARGER THAN 1/4 INCH IN DIAMETER.

SHANK SIZE IS 3/16"WILL CUT ANY FACE GROOVELARGER THAN 1/4 INCH IN DIAMETER.

APPLICATION : USED TO CREATE ANY FACE GROOVE WITH A MAJOR DIAMETER GREATER THAN 3/16"

ITI CARBIDE

QUICK CHANGE FACE GROOVE

ALTINCOATED EDP#

ALTINCOATED EDP#

ALTINCOATED EDP#

42-4000-C42-4500-C

made from

42-860042-860542-861042-861542-862042-8625

42-8600-C42-8605-C42-8610-C42-8615-C42-8620-C42-8625-C

42-960042-960542-961042-961542-962042-9625

42-9600-C42-9605-C42-9610-C42-9615-C42-9620-C42-9625-C

THIS TOOL USES THE SERIES 42HOLDERS AS SEEN ON PAGE 12

SERIES 42 HOLDER

Quick Change Tools AreAlso Available For Boring,Threading, Profiling AndGrooving. See Pages12,42,43 And, 30-31.


ALTINCOATED EDP#

ALTINCOATED EDP#

ALTINCOATED EDP#

ALTINCOATED EDP#

ALTINCOATED EDP#

FULL RADIUS LEFT HAND

ORDER EDP#

ORDER EDP# ORDER EDP#

LEFT HANDSQUARE NOSE

INTERNAL TOOL INC.


TA

LO

G F

OU

RT

EE

N

40

ORDER EDP#

TOOL I.D.

MIN BORE

OFFSET SHANK MAXDEPTH

.040 1/4 X2-1/2O.A.L.

.180

.200 .045

.230 .055

.290 .070

.320 .075

.360 .085

.490 .120

1/4 X2-1/2O.A.L.

5/16 X2-1/2O.A.L.

5/16 X2-1/2O.A.L.

3/8 X2-1/2O.A.L.

3/8 X2-1/2O.A.L.

1/2 X 3" O.A.L.

RIGHT HANDTHREADING TOOLS

TL-180-500TL-180-750TL-180-1000TL-200-500TL-200-750TL-200-1000TL-230-500TL-230-750TL-230-1000TL-290-500TL-290-750TL-290-1000TL-320-500TL-320-750TL-320-1000TL-360-500TL-360-750TL-360-1000

.040 1/4 X2-1/2

.500

.7501.000.500.7501.000.500.7501.000.500.7501.000.500.7501.000.500.7501.000

.180

.200 .045

.230 .055

.290.070

.320 .075

.360 .085

5/16 X2-1/2

3/8 X2-1/2

LEFT HAND THREADING TOOLS

SERIES 30

SERIES 31

OFFSET

OFFSET

MIN BORE

MIN BORE

MAXDEPTH

MAXDEPTH ALL SHANKS HAVE LOCKDOWN FLATS

FOR FASTER SETUPS


THREADING TOOLS

.060

.090

.120

.140

.020

.025

.030

.035

1/8 X 2"O.A.L.

1/8 X 2"O.A.L.

3/16 X 2-1/2O.A.L.

3/16 X 2-1/2O.A.L.

APPLICATION : LEFT HAND AND EXTERNAL THREADING.

APPLICATION : RIGHT HAND ID THREADING.

ORDER EDP#

TOOL I.D.

MIN BORE SHANK

MAXDEPTH

60°

60°

OFFSET

ITI CARBIDE

ITI CARBIDET-060-150T-060-200T-060-300T-090-200T-090-300T-090-400T-120-300T-120-400T-120-500T-140-300T-140-400T-140-500T-160-400T-160-500T-160-750T-160-1000T-180-350T-180-500T-180-750T-180-1000T-200-400T-200-600T-200-750T-200-1000T-230-400T-230-600T-230-750T-230-1000T-230-1500T-290-500T-290-750T-290-1000T-290-1250T-290-1500T-290-1750T-320-500T-320-750T-320-1000T-320-1250T-320-1500T-320-1800

.160 .0403/16 X 2-1/2O.A.L.


ALTINCOATED EDP#

made from

made from

1/4 X2-1/2

5/16 X2-1/2

3/8 X2-1/2

30-1340-C30-1345-C30-1350-C30-1355-C30-1360-C30-1365-C30-1370-C30-1375-C30-1380-C30-1385-C30-1390-C30-1395-C30-1396-C30-1397-C30-1398-C30-1399-C30-1400-C30-1405-C30-1410-C30-1415-C30-1420-C30-1425-C30-1430-C30-1435-C30-1440-C30-1445-C30-1450-C30-1455-C30-1460-C30-1465-C30-1470-C30-1475-C30-1480-C30-1482-C30-1485-C30-1490-C30-1495-C30-1500-C30-1505-C30-1507-C30-1510-C

T-360-500T-360-750T-360-1000T-360-1250T-360-1500T-360-1800T-490-750T-490-1000T-490-1500T-490-2000

30-1515-C30-1520-C30-1525-C30-1530-C30-1532-C30-1535-C30-1540-C30-1542-C30-1545-C30-1550-C

31-120031-120531-121031-121531-122031-122531-123031-123531-124031-124531-125031-125531-126031-126531-127031-127531-128031-1285

30-134030-134530-135030-135530-136030-136530-137030-137530-138030-138530-139030-139530-139630-139730-139830-139930-140030-140530-141030-141530-142030-142530-143030-143530-144030-144530-145030-145530-146030-146530-147030-147530-148030-148230-148530-149030-149530-150030-150530-150730-1510

.150

.200

.300

.200

.300

.400

.300

.400

.500

.300

.400

.500

.400

.500

.7501.000.350.500.7501.000.400.600.7501.000.400.600.7501.0001.500.500.7501.0001.2501.5001.750.500.7501.0001.2501.5001.800

.500

.7501.0001.2501.5001.800.7501.0001.5002.000

30-151530-152030-152530-153030-153230-153530-154030-154230-154530-1550

ORDER EDP#

TOOL I.D.

MIN BORE OFFSET SHANK MAX

DEPTH ALTINCOATED EDP#

RIGHT HANDTHREADING TOOLS CONT.

TH

RE

AD

T

OO

LS

THREADSPER INCH

24 TO 56

40 TO 76

20 TO 56

18 TO 56

16 TO 40

14 TO 40

12 TO 40

10 TO 32

THREADSPER INCH

10 TO 32

8 TO 24

THREADSPER INCH

32 TO 76

20 TO 56

18 TO 56

16 TO 40

14 TO 40

12 TO 40

10 TO 32

10 TO 32

CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL INC.


EXTERNAL ACME THREAD TOOLS

41

ORDER EDP#

MIN BORE OFFSET

THREADS PER INCH

MAXDEPTH

.045.200

.290 .070

.360 .085

ACME THREADING TOOLS STUB ACME THREADING TOOLS

SERIES 32-34

SERIES 34

FLAT

WIDTHSHANK

.021 1/4 X2-1/2

.024 5/16 X2-1/2

3/8 X2-1/2

16

12

14

.032.490 .12010 1/2 X 3"

.028

.0418 .120.490

.0576 .120.490

.088

5 .120.490

ORDER EDP#

OFFSETTHREADS PER INCH

MAXDEPTH

34-140034-140534-141034-141534-142034-142534-143034-143534-144034-144534-145034-145534-146034-146534-147034-147534-148034-148534-149034-149534-150034-150534-151034-151534-152034-152534-153034-153534-154034-154534-155034-1555

.045

.400

.600

.7501.000.500.7501.0001.2501.750.500.7501.0001.2501.800.7501.5002.000.7501.5002.000.7501.5002.000.7501.5002.000.7501.5002.000.7501.5002.000

.200

.290 .070

.360 .085

FLAT

WIDTHSHANK

.024 1/4 X2-1/2

.028 5/16 X2-1/2

3/8 X2-1/2

16

12

14

.037.490 .12010

.033

.0488 .120.490

.0557 .120.490

.0656 .120.490

.490 .1209 .042

.0795 .120.490

ACME AND STUB ACME THREADING TOOLS

MINBORE

29° INC.

MAXDEPTH

FLATWIDTH

OFFSET

ALL SHANKS HAVE LOCKDOWN FLATS FOR FASTER SETUPSAPPLICATION :ACME ID THREADING

SERIES 32 ITI CARBIDEITI CARBIDE

MIN BORE

ITI CARBIDE: MAXIMUM SHEAR WITH MINIMUM WEAR

32-120032-120532-121032-121532-122032-122532-123032-123532-124032-124532-125032-125532-126032-126532-127032-127532-128032-128532-129032-129532-130032-130532-131032-131532-132032-132532-133032-133532-1340

.490 4 .150

.069

.400

.600

.7501.000.500.7501.0001.2501.750.500.7501.0001.2501.800.7501.5002.000.7501.5002.000.7501.5002.000.7501.5002.000.7501.5002.000

1/2 X 3"

1/2 X 3"

1/2 X 3"

1/2 X 3"

1/2 X 3"O.A.L.

ORDER

EDP#

TOOL

IDENTIFICATIONPITCH

TIP

WIDTH

.021

.024

.028

.032

.041

.057

.069

.088

161412108654

SERIES 33

EX-16-ACMEEX-14-ACMEEX-12-ACMEEX-10-ACMEEX-8-ACMEEX-6-ACMEEX-5-ACMEEX-4-ACME

33-100033-100533-101033-101533-102033-102533-103033-1035

EXTERNAL STUB ACME THREAD TOOLS

ORDER

EDP#

TOOL

IDENTIFICATIONPITCH TIP

WIDTH

.024

.028

.033

.037

.042

.048

.055

.065

.079

1614121098765

EX-16-STUBEX-14-STUBEX-12-STUBEX-10-STUBEX-9-STUBEX-8-STUBEX-7-STUBEX-6-STUBEX-5-STUB

33-200033-200533-201033-201533-202033-202533-203033-203533-2040

SERIES 33

TIP WIDTH

3/8" SHANK

29° INC.

ALTINCOATED EDP#

32-1200-C32-1205-C32-1210-C32-1215-C32-1220-C32-1225-C32-1230-C32-1235-C32-1240-C32-1245-C32-1250-C32-1255-C32-1260-C32-1265-C32-1270-C32-1275-C32-1280-C32-1285-C32-1290-C32-1295-C32-1300-C32-1305-C32-1310-C32-1315-C32-1320-C32-1325-C32-1330-C32-1335-C32-1340-C

34-1400-C34-1405-C34-1410-C34-1415-C34-1420-C34-1425-C34-1430-C34-1435-C34-1440-C34-1445-C34-1450-C34-1455-C34-1460-C34-1465-C34-1470-C34-1475-C34-1480-C34-1485-C34-1490-C34-1495-C34-1500-C34-1505-C34-1510-C34-1515-C34-1520-C34-1525-C34-1530-C34-1535-C34-1540-C34-1545-C34-1550-C34-1555-C

ALTINCOATED EDP#

1/2 X 3"O.A.L.

1/2 X 3"O.A.L.

1/2 X 3"O.A.L.

1/2 X 3"O.A.L.

1/2 X 3"

made frommade from

TH

RE

AD

T

OO

LS

ITI CARBIDEmade from ITI CARBIDEmade from

INTERNAL TOOL INC.


TA

LO

G F

OU

RT

EE

N

3/8 X 2-1/2 O.A.L.

5/16 X 2-1/2 O.A.L.

1/4 X 2-1/2 O.A.L.

1/2 X 3" O.A.L.

3/16 X 2-1/2 O.A.L.

TOOL

IDENTIFICATION

MIN

BOREOFFSET

FLAT

WIDTHSHANK

MAX

DEPTH

TR-125-300TR-125-400TR-187-400TR-187-800TR-250-500TR-250-1000TR-312-750TR-312-1250TR-375-750TR-375-1250TR-500-1000TR-500-1500

.060

.300

.400

.400

.800

.5001.000.7501.250.7501.2501.0001.500

.0451/8

.080

.050

3/16

.095

.060

1/4 .095

.0805/16

.130 .1203/8

.160 .1301/2

SERIES 46

1/8 X 2" O.A.L.

MAXDEPTH

OFFSET

MINBORE


FLATWIDTH

45°

THREAD RELIEF TOOLS

2°


46-110046-110546-111046-111546-112046-112546-113046-113546-114046-114546-115046-1155

ORDER

EDP#

TH

RE

AD

T

OO

LS

MULTI-REACH THREADING TOOLS

08-150008-150508-151008-151508-1520

MINIMUM BORE

ORDER EDP#

SHANKDIAMETER

LT-310-4LT-375-4LT-460-6LT-610-6LT-750-6

.310

.375

.460

.610

.750

SHANKLENGTH

4"4"6"6"6"

1/4"5/16"3/8"1/2"5/8"

OFFSET

.060

.060

.080

.100

.120

TOOL I.D.LARGEST PITCH

16161198

SERIES 08 APPLICATION : MULTI-REACH THREADING NO LONGER LIMITED BY NECK LENGTH. ONE TOOL REPLACES A SERIES OF OTHERS.

CARBIDE SHANKS PROVIDE MAXIMUM RIGIDITY.


ITI CARBIDE

ALTIN EDP#

08-1500-C08-1505-C08-1510-C08-1515-C08-1520-C

made from

42-300042-300542-301042-301542-302042-302542-303042-303542-304042-304542-305042-305542-306042-306542-307042-307542-308042-308542-309042-3095

.180

.160

.200

.300

.200

.300

.400

.500

.200

.300

.400

.500

.200

.300

.400

.500

.200

.300

.400

.500

.600

.700

60°

MAX DEPTHOFFSET

MINIMUM BORE

.045

.045

QUICK CHANGE THREADING TOOLSSERIES 42 ITI CARBIDE

42-3000-C42-3005-C42-3010-C42-3015-C42-3020-C42-3025-C42-3030-C42-3035-C42-3040-C42-3045-C42-3050-C42-3055-C42-3060-C42-3065-C42-3070-C42-3075-C42-3080-C42-3085-C42-3090-C42-3095-C

made from

.200

.300

.400

.500

.600

.700

.200

.300

.400

.500

.600

.700

42-310042-310542-311042-311542-312042-312542-313042-313542-314042-314542-315042-3155

42-3100-C42-3105-C42-3110-C42-3115-C42-3120-C42-3125-C42-3130-C42-3135-C42-3140-C42-3145-C42-3150-C42-3155-C

.080

.140

.120

.100

.060

MINIMUM BORE

.025

.025

.030

.035

.040

OFFSET MAX DEPTH

ORDER EDP#

ALTINCOATED EDP#

MINIMUM BORE OFFSET

MAX DEPTH

ORDER EDP#

ALTINCOATED EDP#

42

SEE HOLDERS ON PAGE 12

Quick Change Tools AreAlso Available For Boring,Profiling, Grooving AndFace Grooving. SeePages 12,43, 30-31 And,39.

CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL INC.


METRIC THREADING TOOLS

3/8 X 2-1/2 O.A.L.

5/16 X 2-1/2 O.A.L.

1/4 X 2-1/2 O.A.L.

1/2 X 3" O.A.L.

TOOL

IDENTIFICATION

MIN

BOREOFFSET SHANK

MAX

DEPTH

BU-20-375BU-20-750BU-16-375BU-16-750BU-12-500BU-12-1000BU-10-500BU-10-1000BU-8-750BU-8-1250BU-6-1000BU-6-1250

.050

.060

.070

.080

.090

.120

.375

.750

.375

.750

.5001.000.5001.000.7501.250.7501.250

1/4

3/8

1/2

SERIES 38 BUTTRESS THREADING TOOLS

38-110038-110538-111038-111538-112038-112538-113038-113538-114038-114538-115038-1155

ORDER

EDP#

3/8

5/16

1/2

3/8 X 2-1/2 O.A.L.

1/2 X 3" O.A.L.

THREADSPER INCH

20

16

12

10

8

6

ORDER EDP#

THREAD SIZE

OFFSET SHANK MAX _DEPTH MM INCH

SERIES 30

OFFSET

MAXDEPTH


2MM

3MM

4MM

5MM

6MM

8MM

.635 MM

.762 MM

.889 MM

1.27

MM

1.90

MM

2.03

MM

APPLICATION : RIGHT HAND ID THREADING.

60°

30-180030-180530-181030-181530-182030-182530-183030-183530-184030-184530-185030-185530-186030-186530-187030-187530-188030-189030-189530-1900

PITCHRANGE

MINBORE

0.200.70

0.20

0.80

0.20

1.00

0.20

1.40

0.20

2.10

0.20

2.20

4.0 (.157) 8.0 (.315) 4.0 (.157) 8.0 (.315)12.0 (.472) 4.0 (.157) 8.0 (.315)12.0 (.472)10.0 (.394)14.0 (.551)18.0 (.709)25.0 (.985)12.0 (.472)18.0 (.709)25.0 (.985)40.0 (1.576)12.0 (.472)18.0 (.709)25.0 (.985)40.0 (1.576)

5/16 X2-1/2O.A.L.

3/8 X2-1/2O.A.L.

3/8 X2-1/2O.A.L.

1/2 X3"O.A.L.

TH

RE

AD

T

OO

LS

12.0 (.472)18.0 (.709)25.0 (.985)40.0 (1.576)12.0 (.472)18.0 (.709)25.0 (.985)40.0 (1.576)12.0 (.472)18.0 (.709)25.0 (.985)40.0 (1.576)

ORDER EDP#

THREAD SIZE

OFFSET SHANK MAX _DEPTH MM INCH

30-190530-191030-191530-192030-192530-193030-193530-194030-194530-195030-195530-1960

10MM

12MM

14MM

16MM

18MM

20MM

22MM

0.20

2.20

0.20

2.50

0.20

3.50

PITCHRANGE

MINBORE

MINBORE

1.52 MM

2.28 MM

3.04 MM

4.20 MM

5.08 MM

7.36 MM

1/4 X2-1/2O.A.L.

1/8 X 2"

1/8 X 2"

3/16 X2-1/2

3/8 X2-1/2O.A.L.

8.12 MM

9.10 MM

12.5 MM

1.95 MM

2.15 MM

3.01 MM


43

45°

OFFSET

MINBORE

MAXDEPTH

7°


42-5000-C42-5005-C42-5010-C42-5015-C42-5020-C42-5025-C42-5030-C42-5035-C42-5040-C42-5045-C42-5050-C42-5055-C42-5060-C42-5065-C42-5070-C42-5075-C

.080

.140

.120

.100

MINIMUM BORE

MAX DEPTH

ORDER EDP#

.200

.300

.200

.300

.200

.300

.400

.500

.600

.700

.200

.300

.400

.500

.600

.700

.005

.005

.007

.007

.040

.040

.050

.050

QUICK CHANGE PROFILE TOOLS

OFFSET TIPRADIUS

SERIES 42 ITI CARBIDE

ALTINCOATED EDP#

42-500042-500542-501042-501542-502042-502542-503042-503542-504042-504542-505042-505542-506042-506542-507042-5075

made from

42-5080-C42-5085-C42-5090-C42-5095-C42-5100-C42-5105-C42-5110-C42-5115-C42-5120-C42-5125-C42-5130-C42-5135-C

.180

MINIMUM BORE

MAX DEPTH

ORDER EDP#

.160

.200

.300

.400

.500

.600

.700

.200

.300

.400

.500

.600

.700

TIP RADIUS

OFFSET

MINIMUM BORE

MAX DEPTH

30°

5°

.007

.007

.060

.080

OFFSET TIPRADIUS

ALTINCOATED EDP#

42-508042-508542-509042-509542-510042-510542-511042-511542-512042-512542-513042-5135

SEE HOLDERS ON PAGE 12


Quick Change Tools AreAlso Available For Boring,Threading, Grooving AndFace Grooving. See Pages12,42, 30-31 And, 39.


HP USER

Rectangle

HP USER

Text Box

missouricarbide.com

INTERNAL TOOL INC.


TA

LO

G F

OU

RT

EE

N

60 DEGREE INSERTS FOR .236 BARS

HEAD I.D.ORDER EDP#

ORDER EDP#

SCREWNUMBER

CARBIDESHANK

STEELSHANK

T001 S-6

SHANKLENGTH

6"

INSERT I.C.

3/16 5/32 99-11353"

36-1115

SHANK DIA.

SCREW EDP #

SHANK STYLES

36-1100 36-110536-1110

ORDER EDP#TIN COATED

PITCHRANGE20-48 37-1300

.236 MINIMUM BORE

HEAD I.D. SCREWNUMBER

CARBIDESHANK

STEELSHANK


T002 S-8

SHANKLENGTH

6"1/4 3/16 99-1145 3"

36-1140 36-1145

SHANK DIA.

SHANK STYLES

36-1120 36-112536-1135

.354 MINIMUM BOREHEAD I.D. SCREW

NUMBER

CARBIDESHANK

STEELSHANK


T003 S-8

SHANKLENGTH

6"

INSERT I.C.

5/16 3/163"

36-1170 36-1175

SHANK DIA.

SHANK STYLES

36-1150 36-1155 36-116036-1165

SERIES 36

FULL PROFILE INSERTS FOR .236 BARS

60 DEGREE INSERTS FOR .307 & .354 BARS

PITCH

TIN COATED

.307 MINIMUM BORESERIES 36



PITCH

32 37-13282824

37-1332

20

TIN COATED

18

37-133637-134037-1344

FULL PROFILE INSERTS FOR .307 & .354 BARS

16 37-1348

INSERT I.C.

ORDER EDP#

36-1130

ORDER EDP#

ORDER EDP#

ORDER EDP#

ORDER EDP#

ORDER EDP#

3/16 I.C.

3/16 I.C.

NO-RADIUS

RADIUS

RADIUS

NO-RADIUS

3228242018

37-130437-130837-131237-131637-1320

INDEXABLE INSERT THREADING BARS

ITI CARBIDE: SIMPLY UN-COMPARABLE

SCREW EDP #

SCREW EDP #

99-1145

44

TH

RE

AD

T

OO

LS

CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL INC.


HEAD I.D. ORDER EDP#ORDER EDP# ORDER EDP#SCREWNUMBER

CARBIDESHANK

STEELSHANK


T004 S-11

SHANKLENGTH

6"

INSERT I.C.

3/8 1/43"

36-1235 36-1240

SHANK DIA.

SHANK STYLES

36-1215 36-1220 36-122536-1230

.625 MINIMUM BOREHEAD I.D. ORDER EDP#ORDER EDP# ORDER EDP#

CARBIDESHANK

STEELSHANK


T005 S-11

SHANKLENGTH

6"

INSERT I.C.

1/2 1/43"

36-1265 36-1270

SHANK DIA.

SHANK STYLES

36-1245 36-1250 36-125536-1260

60 DEGREE INSERTS FOR .390, .470 & .625 BARS

.470 MINIMUM BORE



PITCH

TIN COATED

ORDER EDP#UN-COATED C-2

FULL PROFILE INSERTS FOR .390, .470 & .625 BARS

PIPE THREAD INSERTS FOR .390, .470 & .625 BARS

PITCH

27

C-2 UNCOATED

37-1402 37-1404

TIN COATED

18 37-1406 37-1408


CARBIDESHANK

STEELSHANK


T003.5 S-11

SHANKLENGTH

6"

INSERT I.C.

5/16 1/4 99-1150 3"36-1205 36-1210

SHANK DIA.

SCREW EDP #

SHANK STYLES

36-1180 36-1185 36-119036-1200


NO-RADIUS

RADIUS

RADIUS

SERIES 36

SERIES 36

3632282420181614131211

37-137037-137437-137837-138237-138337-138637-139013-139437-139837-140137-1405

37-137237-137637-138037-138437-138537-138837-139237-139637-140037-140337-1407



SCREW EDP #

SCREW EDP #

99-1150

SCREWNUMBER

99-1150

TH

RE

AD

T

OO

LS

45


UN COATED


HP USER

Rectangle

HP USER

Text Box

missouricarbide.com

INTERNAL TOOL


TA

LO

G F

OU

RT

EE

N

46


CARBIDESHANK

STEELSHANK


T007 S-16

SHANKLENGTH

6"

INSERT I.C.

5/8 3/8 99-11603"

36-1340 36-1345

SHANK DIA.

SHANK STYLES

36-1320 36-132536-1335

1" MINIMUM BOREHEAD I.D. ORDER EDP#ORDER EDP# ORDER EDP#

CARBIDESHANK

STEELSHANK


T008 S-16

SHANKLENGTH

6"

INSERT I.C.

3/4 3/83"

36-1385 36-1390

SHANK DIA.

SCREW EDP #

SHANK STYLES

36-1365 36-137036-1380

60 DEGREE INSERTS FOR .640 .750 & 1" BARS

.750 MINIMUM BORE


PITCHRANGE

C-2 UNCOATED

PITCH

TIN COATED

ORDER EDP#UN-COATED C-2

FULL PROFILE INSERTS FOR .640 .750 & 1" BARS


9" 36-1350 36-1355

36-1330

36-1360

9" 36-1395 36-1400 36-1405

36-1375


CARBIDESHANK

STEELSHANK


T006 S-16-S

SHANKLENGTH

6"

INSERT I.C.

1/2 3/8 99-11553"

36-1295 36-1300

SHANK DIA.

SHANK STYLES

36-1275 36-128036-1290


9" 36-1305 36-1310

36-1285

36-1315

PITCH C-2 UNCOATED TIN COATED

PIPE THREAD INSERTS FOR .640 .750 & 1" BARS

NO-RADIUS

RADIUS

RADIUS

SERIES 36

SERIES 36

16-488-488-14

37-141037-141437-1415

37-141237-141637-1417

363228242018161412108

37-141837-142237-142637-143037-143437-143837-144237-144637-145037-145437-1458

37-142037-142437-142837-143237-143637-144037-144437-144837-145237-145637-1460

27181411-1/28

37-146237-146637-147037-147437-1478

37-146437-146837-147237-147637-1480


SCREW EDP #

SCREW EDP #

SCREWNUMBER

99-1160

THREAD TOOLS

CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL


ORDER

EDP#O.A.L.

SHANK

DIA.

LENGTH

OF CUT

A7-312-B

A7-313-B

A7-375-B

A7-500-B

A7-625-B

A7-750-B

A7-875-B

A7-1000-B

5/16

5/16

3/8

1/2

5/8

3/4

7/8

1"

1/85/323/161/45/163/87/161/2

SERIES 60

TIP

RADIUS

.032

.040

.046

.062

.078

.093

.109

.125

2"

2"

2-1/2"

2-1/2"

2-1/2"

2-1/2"

2-1/2"

3"

SPECIAL SIZES AVAILABLE ON REQUEST

DIE SINKERS

14' INCLUDED ANGLE

LENGTHOF CUT

TIPRADIUS

SHANK DIA.

RUNNER CUTTERS

60-1400

60-1405

60-1410

60-1415

60-1420

60-1425

60-1430

60-1435

ORDER

EDP#

TOOL

IDENTIFICATIONO.A.L.

SHANK

DIA.

LENGTH

OF CUT

RU-125-3RU-125-5RU-125-10RU-187-3RU-187-5RU-187-10RU-250-3RU-250-5RU-250-10RU-312-3RU-312-5RU-312-10RU-375-3RU-375-5RU-375-10RU-500-3RU-500-5RU-500-10

.590

.370

.175

.750

.620

.3101.000.890.4421.1001.060.5301.3751.240.6103.0622.310.850

.125

.187

.250

.312

.375

.500

TIP

RADIUS

.031

.039

.047

.062

.078

.094

2"

2-1/2"

2-1/2"

2-1/2"

3"

4"

61-120061-125061-130061-135061-140061-145061-150061-155061-160061-165061-170061-175061-180061-185061-190061-195061-200061-2050


SERIES 61

TAPER

PER SIDE

3°5°10°3°5°10°3°5°10°3°5°10°3°5°10°3°5°10°

APPLICATION : FOR MACHINING TAPERS OR RELIEFS.

APPLICATION : FOR DIE SINKING OR RELIEF WORK.

TOOL

IDENTIFICATION

ITI CARBIDE

ITI CARBIDE

COUNTERSINKS & MOLD CUTTING TOOLS

60°


63-300063-500063-600063-310063-510063-610063-320063-520063-6200

82°

90°

.250

.375

.500

.250

.375

.500

.250

.375

.500

2-1/2"2-1/2"3"2-1/2"2-1/2"3"2-1/2"2-1/2"3"

CARBIDE COUNTERSINKSORDER

EDP #

SHANK

DIAO.A.L.

INCLUDED

ANGLE

APPLICATION : FOR COUNTER SINKING HOLES

6 FLUTE DOUBLE ENDCHATTER FREE STYLE

made from

made from

made from


63-3000-C63-5000-C63-6000-C63-3100-C63-5100-C63-6100-C63-3200-C63-5200-C63-6200-C

ORDER

EDP #


HP USER

Rectangle

HP USER

Text Box

missouricarbide.com

INTERNAL TOOL


TA

LO

G F

OU

RT

EE

N

48

ORDER

EDP#OFFSET

TIP

RADIUS

MAX

DEPTH

.080.180

.080

.110

.130

.160

.010

.220 .010

.300 .015

.360 .015

.490 .015

SERIES 56

ORDER

EDP#

MIN

BOREOFFSET

TIP

RADIUS

MAX

DEPTH

.080.180

.080

.110

.130

.160

.010

.220 .010

.300 .015

.360 .015

.490 .015

SERIES 56

3/8 X 2-1/2

5/16X

2-1/2

1/4 X 2-1/2

1/2X

3"

3/16 X 2-1/2

3/8 X 2-1/2

5/16X

2-1/2

1/4X

2-1/2

1/2X

3"

3/16X

2-1/2



MINBORE

OFFSET

30° MAXDEPTH

MAXDEPTH

OFFSET

MINBORE

30°

5°

REVERSE PROFILE TOOLS

PROFILE TOOLS

RADIUS

RADIUS

.007.120

.040

APPLICATION :REVERSE PROFILING TOOL

MIN

BORE

56-100056-100556-101056-108056-108556-109056-110056-110556-111056-111556-112056-112556-113056-113556-114056-114556-115056-115556-116056-116556-117056-117556-1180

.200

.300

.400

.250

.500

.750

.500

.7501.000.500.7501.000.500.7501.000.500.7501.0001.250.500.7501.0001.250

.500

.7501.000.500.7501.000.500.7501.000.500.7501.0001.250.500.7501.0001.250

56-150056-150556-151056-151556-152056-152556-153056-153556-154056-154556-155056-155556-156056-156556-157056-157556-1580

ITI CARBIDE

ITI CARBIDE

MULTI-REACH PROFILE TOOLS

09-140009-140509-141009-141509-1420

.360

.420

.480

.615

.750

4"4"6"6"6"

1/4"5/16"3/8"1/2"5/8"

.100

.100

.100

.110

.125


CARBIDE SHANKS PROVIDE MAXIMUM RIGIDITY

MIN

BOREORDER

EDP#OFFSET

SHANK

DIAMETER

SHANK

LENGTHRADIUS

.010

.015

.015

.015

.020

APPLICATION :STANDARD PROFILING TOOL

APPLICATION : MULTI-REACH PROFILING NO LONGER LIMITED BY NECK LENGTH. ONE TOOL REPLACES A SERIES OF OTHERS.


ALTINCOATED EDP#

56-1000-C56-1005-C56-1010-C56-1080-C56-1085-C56-1090-C56-1100-C56-1105-C56-1110-C56-1115-C56-1120-C56-1125-C56-1130-C56-1135-C56-1140-C56-1145-C56-1150-C56-1155-C56-1160-C56-1165-C56-1170-C56-1175-C56-1180-C

ALTINCOATED EDP#

56-1500-C56-1505-C56-1510-C56-1515-C56-1520-C56-1525-C56-1530-C56-1535-C56-1540-C56-1545-C56-1550-C56-1555-C56-1560-C56-1565-C56-1570-C56-1575-C56-1580-C

ALTIN

COATED

EDP#

09-1400-C09-1405-C09-1410-C09-1415-C09-1420-C

.090

.050

.005

1/8X

2"

made from

made from

1/8X

2"

made from



CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL


R.H. OFFSET PROFILE TOOLS

FINE POINT PROFILE TOOLS

SERIES 56

ORDER

EDP#

TOOL

IDENTIFICATION

MIN

BOREOFFSETRADIUS

MAX

DEPTH

.020

.020

.020

.020

FIP-220-500FIP-220-750FIP-220-1000FIP-300-750FIP-300-1000FIP-360-750FIP-360-1000FIP-360-1250FIP-490-1000FIP-490-1250FIP-490-1500

.500

.7501.000.7501.000.7501.0001.2501.0001.2501.500

.220 .010

.300 .015

.360 .015

.490 .015

SERIES 56

3/8 X 2-1/2

5/16 X 2-1/2

1/4 X 2-1/2

1/2 X 3"

OFFSET & FINE POINT PROFILE TOOLS

APPLICATION :FINE POINT PROFILING TOOL.

APPLICATION :LEFT HAND OFFSET PROFILING TOOL.

ORDER

EDP#

MIN

BOREOFFSETRADIUS

.080

.110

.130

.160

.220 .010

.300 .015

.360 .015

.490 .015

SERIES 56

3/8 X 2-1/2 O.A.L.

5/16 X 2-1/2 O.A.L.

1/4 X 2-1/2O.A.L.

1/2 X 3" O.A.L.

L.H. OFFSET PROFILE TOOLS

ORDER

EDP#

TOOL

IDENTIFICATION

MIN

BOREOFFSETRADIUS

MAX

DEPTH

.080

.110

.130

.160

.220 .010

.300 .015

.360 .015

.490 .015

3/8 X 2-1/2 O.A.L.

5/16 X 2-1/2 O.A.L.

1/4 X 2-1/2O.A.L.

1/2 X 3"O.A.L.

APPLICATION :RIGHT HAND OFFSET PROFILING TOOL.

INSIDE PROFILING

OUTSIDE PROFILING

MAX DEPTH OFFSET

RADIUS

MINBORE

30° 57°

MINBORE

MAX DEPTH

OFFSET

57°

30°

MAX DEPTH

MINBORE

23°

2°

56-131556-132056-132556-133056-133556-134056-134556-135056-136056-136556-1370

56-191556-192056-192556-193056-193556-194056-194556-195056-195556-196056-196556-197056-197556-1980

LOP-220-500LOP-220-750LOP-220-1000LOP-300-500LOP-300-750LOP-300-1000LOP-360-500LOP-360-750LOP-360-1000LOP-360-1250LOP-490-500LOP-490-750LOP-490-1000LOP-490-1250

.500

.7501.000.500.7501.000.500.7501.0001.250.500.7501.0001.250

56-1815-C56-1820-C56-1825-C56-1830-C56-1835-C56-1840-C56-1845-C56-1850-C56-1855-C56-1860-C56-1865-C56-1870-C56-1875-C56-1880-C

ROP-220-500ROP-220-750ROP-220-1000ROP-300-500ROP-300-750ROP-300-1000ROP-360-500ROP-360-750ROP-360-1000ROP-360-1250ROP-490-500ROP-490-750ROP-490-1000ROP-490-1250

MAX

DEPTH

.500

.7501.000.500.7501.000.500.7501.0001.250.500.7501.0001.250

TOOL

IDENTIFICATION

ITI CARBIDE

ITI CARBIDE

ITI CARBIDE


made from

made from

made from




56-1315-C56-1320-C56-1325-C56-1330-C56-1335-C56-1340-C56-1345-C56-1350-C56-1360-C56-1365-C56-1370-C

ALTINCOATED EDP#

56-1915-C56-1920-C56-1925-C56-1930-C56-1935-C56-1940-C56-1945-C56-1950-C56-1955-C56-1960-C56-1965-C56-1970-C56-1975-C56-1980-C

ALTINCOATED EDP#

56-181556-182056-182556-183056-183556-184056-184556-185056-185556-186056-186556-187056-187556-1880

ALTINCOATED EDP#

INTERNAL TOOL


TA

LO

G F

OU

RT

EE

N

DRILL-MILLS

APPLICATION : DRILL & MILL WITH ONE TOOL.SERIES 49 ITI CARBIDE

SHANK DIAMETER

INCLUDED ANGLE

LENGTH OF CUT

CENTER CUTTING30° RIGHT HAND HELIXRIGHT HAND CUT

120° INCLUDED ANGLE

.125

.187

.218

.250

.281

.312

.343

.375

.406

.437

.468

.500

5/8

3/4

3/4

1"

1"

1”

1"

1"

1”

1”

1”

1”

2"

2-1/2

2-1/2

3"

3"

3"

3"

3"

3”

3”

3”

3”

1/8

3/16

1/4

1/4

5/16

5/16

3/8

3/8

7/16

7/16

1/2

1/2

90° INCLUDED ANGLE

.125

.187

.218

.250

.281

.312

.343

.375

.406

.437

.468

.500

5/8

3/4

3/4

1"

1"

1”

1"

1"

1”

1”

1”

1”

2"

2-1/2

2-1/2

3"

3"

3"

3"

3"

3”

3”

3”

3”

1/8

3/16

1/4

1/4

5/16

5/16

3/8

3/8

7/16

7/16

1/2

1/2

82° INCLUDED ANGLE

.125

.187

.218

.250

.281

.312

.343

.375

.406

.437

.468

.500

5/8

3/4

3/4

1"

1"

1”

1"

1"

1”

1”

1”

1”

2"

2-1/2

2-1/2

3"

3"

3"

3"

3"

3”

3”

3”

3”

1/8

3/16

1/4

1/4

5/16

5/16

3/8

3/8

7/16

7/16

1/2

1/2

SHANKDIAMETER

LENGTH OF CUT

OVERALL LENGTH SIZE

60° INCLUDED ANGLE

DRILL-MILLS

50

49-2015

49-2065

49-2115

49-2165

49-2215

49-2265

49-2315

49-2365

49-2415

49-2465

49-2515

49-2565

49-2010

49-2060

49-2110

49-2160

49-2210

49-2260

49-2310

49-2360

49-2410

49-2460

49-2510

49-2560

49-2005

49-2055

49-2105

49-2155

49-2205

49-2255

49-2305

49-2355

49-2405

49-2455

49-2505

49-2555

2 FLUTE EDP #


2 FLUTE

made from

ALTINCOATED EDP #

49-2015-C

49-2065-C

49-2115-C

49-2165-C

49-2215-C

49-2265-C

49-2315-C

49-2365-C

49-2415-C

49-2465-C

49-2515-C

49-2565-C

49-2010-C

49-2060-C

49-2110-C

49-2160-C

49-2210-C

49-2260-C

49-2310-C

49-2360-C

49-2410-C

49-2460-C

49-2510-C

49-2560-C

49-2005-C

49-2055-C

49-2105-C

49-2155-C

49-2205-C

49-2255-C

49-2305-C

49-2355-C

49-2405-C

49-2455-C

49-2505-C

49-2555-C

SHANKDIAMETER

LENGTH OF CUT

OVERALL LENGTH SIZE

2 FLUTE EDP #

ALTINCOATED EDP #

SHANKDIAMETER

LENGTH OF CUT

OVERALL LENGTH SIZE

2 FLUTE EDP #

ALTINCOATED EDP #

2 FLUTE

.125

.187

.218

.250

.281

.312

.343

.375

.406

.437

.468

.500

5/8

3/4

3/4

1"

1"

1”

1"

1"

1”

1”

1”

1”

2"

2-1/2

2-1/2

3"

3"

3"

3"

3"

3”

3”

3”

3”

1/8

3/16

1/4

1/4

5/16

5/16

3/8

3/8

7/16

7/16

1/2

1/2

49-2000

49-2050

49-2100

49-2150

49-2200

49-2250

49-2300

49-2350

49-2400

49-2450

49-2500

49-2550

49-2000-C

49-2050-C

49-2100-C

49-2150-C

49-2200-C

49-2250-C

49-2300-C

49-2350-C

49-2400-C

49-2450-C

49-2500-C

49-2550-C

SHANKDIAMETER

LENGTH OF CUT

OVERALL LENGTH SIZE

2 FLUTE EDP #

ALTINCOATED EDP #

2 FLUTE 2 FLUTE

CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL


.125

.187

.218

.250

.281

.312

.343

.375

.406

.437

.468

.500

5/8

3/4

3/4

1"

1"

1”

1"

1"

1”

1”

1”

1”

2"

2-1/2

2-1/2

3"

3"

3"

3"

3"

3”

3”

3”

3”

1/8

3/16

1/4

1/4

5/16

5/16

3/8

3/8

7/16

7/16

1/2

1/2

49-1015

49-1065

49-1115

49-1165

49-1215

49-1265

49-1315

49-1365

49-1415

49-1465

49-1515

49-1565

60° INCLUDED ANGLE

.125

.187

.218

.250

.281

.312

.343

.375

.406

.437

.468

.500

5/8

3/4

3/4

1"

1"

1”

1"

1"

1”

1”

1”

1”

2"

2-1/2

2-1/2

3"

3"

3"

3"

3"

3”

3”

3”

3”

1/8

3/16

1/4

1/4

5/16

5/16

3/8

3/8

7/16

7/16

1/2

1/2

SHANKDIAMETER

LENGTH OF CUT

OVERALL LENGTH SIZE

49-1010

49-1060

49-1110

49-1160

49-1210

49-1260

49-1310

49-1360

49-1410

49-1460

49-1510

49-1560

4 FLUTE EDP #

82° INCLUDED ANGLE

49-1015-C

49-1065-C

49-1115-C

49-1165-C

49-1215-C

49-1265-C

49-1315-C

49-1365-C

49-1415-C

49-1465-C

49-1515-C

49-1565-C

ALTINCOATED EDP #

49-1010-C

49-1060-C

49-1110-C

49-1160-C

49-1210-C

49-1260-C

49-1310-C

49-1360-C

49-1410-C

49-1460-C

49-1510-C

49-1560-C

DRILL-MILLS

APPLICATION : DRILL & MILL WITH ONE TOOL.SERIES 49 ITI CARBIDEmade from

SHANK DIAMETER

INCLUDED ANGLE

LENGTH OF CUT

4 FLUTE

.125

.187

.218

.250

.281

.312

.343

.375

.406

.437

.468

.500

5/8

3/4

3/4

1"

1"

1”

1"

1"

1”

1”

1”

1”

2"

2-1/2

2-1/2

3"

3"

3"

3"

3"

3”

3”

3”

3”

1/8

3/16

1/4

1/4

5/16

5/16

3/8

3/8

7/16

7/16

1/2

1/2

49-1005

49-1055

49-1105

49-1155

49-1205

49-1255

49-1305

49-1355

49-1405

49-1455

49-1505

49-1555

49-1005-C

49-1055-C

49-1105-C

49-1155-C

49-1205-C

49-1255-C

49-1305-C

49-1355-C

49-1405-C

49-1455-C

49-1505-C

49-1555-C

90° INCLUDED ANGLE

.125

.187

.218

.250

.281

.312

.343

.375

.406

.437

.468

.500

5/8

3/4

3/4

1"

1"

1”

1"

1"

1”

1”

1”

1”

2"

2-1/2

2-1/2

3"

3"

3"

3"

3"

3”

3”

3”

3”

1/8

3/16

1/4

1/4

5/16

5/16

3/8

3/8

7/16

7/16

1/2

1/2

49-1000

49-1050

49-1100

49-1150

49-1200

49-1250

49-1300

49-1350

49-1400

49-1450

49-1500

49-1550

49-1000-C

49-1050-C

49-1100-C

49-1150-C

49-1200-C

49-1250-C

49-1300-C

49-1350-C

49-1400-C

49-1450-C

49-1500-C

49-1550-C


51

DRILL-MILLS

CENTER CUTTING30° RIGHT HAND HELIXRIGHT HAND CUT

SHANKDIAMETER

LENGTH OF CUT

OVERALL LENGTH SIZE

4 FLUTE EDP #

ALTINCOATED EDP #

4 FLUTE

4 FLUTE

SHANKDIAMETER

LENGTH OF CUT

OVERALL LENGTH SIZE

4 FLUTE EDP #

ALTINCOATED EDP #

SHANKDIAMETER

LENGTH OF CUT

OVERALL LENGTH SIZE

4 FLUTE EDP #

ALTINCOATED EDP #

4 FLUTE

NEED A SPECIAL? TURN TO PAGE 52 AND LET USKNOW WHAT YOU NEED

INTERNAL TOOL


TA

LO

G F

OU

RT

EE

N

52

Sim

ply m

ake

a co

py

fill in th

e in

form

atio

n below and fa

x or e

mail to

us. fa

x # 909-392-2627

we will q

uote as so

on as p

ossib

le. IN

FO@

internalto

ol.co

mAny d

imensio

n yo

ur n

ot su

re of le

ave

blank w

e will q

uote sta

ndard.

fill in sh

eet is A

lso ava

ilable at In

ternalto

ol.co

m

SHANK

DIAM

ETER

LENGTH

OF CU

T

.X+/- .015

.XX+/-.005

.XXX+/-.002

TOOL NU

MBER:

DRAWN BY:

DATE

INTERNAL TOO

L

FILLIN

THE

BLAN

KSB

ELOW

AND

FAXTO

909-392-2627O

RE

MAILTO

SALES@IN

TERNALTO

OL.CO

M

INCLUDED

ANGLE

NOTES

TOLERAN

CE

NUMBER

OF FLUTES

SERIES49

DRILLM

ILLS

TYPEOF

MATERIALTO

BE CUT

QUO

TEIN Q

UANTITIES OF

COM

PANY

NAME

YOUR NAM

E

PHONE #

EMAIL

YOUR

DISTRIBUTOR

OVERALL LENG

TH


http://internaltool.com/


CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL


ORDER

EDP#

SERIES 71

SIZEOVERALL

LENGTH

ORDER

EDP#

TOOL

IDOVERALL

LENGTH

SHANK

DIA.

DRILL

DIAMETER

.125

.187

.187

.250

.250

.312

.312

.375

.375

.437

.437

.500

.500

SERIES 58

FLUTE

LENGTH

FOR DRILLING SHALLOW DEPTHHOLES IN HARD MATERIALSSPADE DRILLS

FLUTELENGTH

APPLICATION :

118° POINT

APPLICATION : DRILLING CENTERS IN JUSTABOUT ANY MATERIAL.

.125 (1/8)

.156 (5/32)

.187 (3/16)

.218 (7/32)

.250 (1/4)

.281 (9/32)

.312 (5/16)

.343 (11/32)

.375 (3/8)

.406 (13/32)

.437 (7/16)

.468 (15/32)

.500 (1/2)

58-110858-111058-111258-111458-111658-111858-112058-112258-112458-112658-112858-113058-1132

2"2"2"2"2"2-1/2"2-1/2"2-1/2"2-1/2"3"3"3"3"

SD-125SD-156SD-187SD-218SD-250SD-281SD-312SD-343SD-375SD-406SD-437SD-468SD-500

1/29/1611/1611/1613/167/87/815/161-1/81-1/81-1/81-3/161-3/16

#0#1#2#3#4#5#6

71-100571-101071-101571-102071-102571-103071-1035

1/81/83/161/45/167/161/2

ITI CARBIDE

DIAMETER PILOT

DIAMETER

PILOT

LENGTH

1/32 (.031)3/64 (.046)5/64 (.078)7/64 (.109)1/8 (.125)3/16 (.187)7/32 (.218)

1/32 (.031)3/64 (.046)5/64 (.078)7/64 (.109)1/8 (.125)3/16 (.187)7/32 (.218)

2"2"2-1/2"2-1/2"2-1/2"3"3"

CARBIDE CENTER DRILLS

ITI CARBIDE

OVERALL LENGTH

DIAMETER PILOT DIAMETER

PILOT LENGTH

60° INCLUDED ANGLE

DRILLS: SPADE, CENTER, SPOTTING


SPOTTING DRILLS

75-1000

75-1005

75-1010

75-1015

75-1020

75-1025

75-1030

75-1035

.250

.312

.375

.500

.562

.687

.812

.937

UP TO #2 SCREW

UP TO #6 SCREW

UP TO #8 SCREW

UP TO #10 SCREW

UP TO 1/4" SCREW

UP TO 5/16" SCREW

UP TO 3/8" SCREW

UP TO 1/2" SCREW

1/4

5/16

3/8

1/2

1/2

1/2

1/2

1/2

SHANKDIAMETER

EDPNUMBER SIZE

SPD-250-82

SPD-312-82

SPD-375-82

SPD-500-82

SPD-562-82

SPD-687-82

SPD-812-82

SPD-937-82

82° INCLUDED ANGLE

TOOL ID #

75-2000

75-2005

75-2010

75-2015

75-2020

75-2025

.125

.187

.250

.312

.375

.500

1/8

3/16

1/4

5/16

3/8

1/2

SHANKDIAMETER

EDPNUMBER

SIZE

SPD-125-90

SPD-187-90

SPD-250-90

SPD-312-90

SPD-375-90

SPD-500-90

90° INCLUDED ANGLETOOL ID #

75-3000

75-3005

75-3010

75-3015

75-3020

75-3025

.125

.187

.250

.312

.375

.500

1/8

3/16

1/4

5/16

3/8

1/2

SHANKDIAMETER

EDPNUMBER SIZE

SPD-125-120

SPD-187-120

SPD-250-120

SPD-312-120

SPD-375-120

SPD-500-120

TOOL ID #


APPLICATION :CNC SPOT DRILLINGFASTER THAN CENTER DRILLINGCAN BE USED AS A COUNTERINKSERIES 75 ITI CARBIDE

SCREW SIZE

FOR FLAT HEAD SCREWS

made from

made from

made from

OVERALL

LENGTH

2"

2"

2"

2-1/2"

OVERALL

LENGTH

OVERALL

LENGTH

2-1/2"

3"

3"

3"

3"

2"

2"

2"

2"

2"

2"

2"

2-1/2"

2"

2"

2"

53

INTERNAL TOOL


TA

LO

G F

OU

RT

EE

N

54 THE LEADER IN INNOVATION

ORDER

EDP#

ST-1

ST-2

ST-3

ST-4

ST-5

ST-6

ST-7

ST-8

ST-9

ST-10

ST-11

SERIES 69

1°

2°

3°

4°

5°

6°

7°

8°

9°

10°

11°

SMALL CARBIDE STUB TAPERS

ANGLE PER SIDE

LENGTHOF CUT IS 1/2"

TIP DIA'S .062 +.000 / -.003

SHANK DIA. IS 1/4"

69-1000

69-1020

69-1030

69-1040

69-1050

69-1060

69-1070

69-1080

69-1090

69-1100

69-1105

APPLICATION : FOR MILLING TAPERS OR TAPERED REAMING

TOOL

IDENTIFICATION

ITI CARBIDE

ANGLE

PER SIDE

OVERAL LENGTH IS 2.5"

3 FLUTE WITH 15° HELIX

made from

SHANK AND

O.A.L.

1°

1-1/2°

2°

3°

4°

5°

7°

10°

15°

30°

45°

69-2000

69-2020

69-2030

69-2040

69-2050

69-2060

69-2070

69-2080

69-2090

69-3000

69-3010

69-3020

69-3030

69-3040

69-3050

69-3060

69-3070

69-3080

69-3090

69-4000

69-4010

69-4020

69-4030

69-4040

69-4050

69-4060

69-4070

69-4080

69-4090

69-5000

69-5010

ANGLE

PER SIDE

SERIES 69

STANDARD TAPERED CARBIDE ENDMILLS TIP

DIAMETER LENGTH

OF CUT

ORDER

EDP#

.094

.125

.250

.094

.125

.250

.094

.125

.250

.094

.125

.250

.094

.125

.250

.094

.125

.250

.094

.125

.250

.094

.125

.250

.094

.125

.250

.094

.125

.250

.125

.750

1.000

1.250

.750

1.000

1.250

.750

1.000

1.250

1.000

1.000

1.190

1.000

1.000

1.250

.750

1.250

1.250

.500

1.000

1.000

.750

1.000

1.250

.250

.460

.460

.240

.325

.430

.313

1/4 X 2.5

1/4 X 3.0

3/8 X 3.5

1/4 X 2.5

1/4 X 3.0

3/8 X 3.5

1/4 X 2.5

1/4 X 3.0

3/8 X 3.5

1/4 X 3.0

1/4 X 3.0

3/8 X 3.5

1/4 X 3.0

3/8 X 3.0

1/2 X 3.5

1/4 X 3.0

3/8 X 3.5

1/2 X 3.5

1/4 X 3.0

3/8 X 3.0

1/2 X 3.5

3/8 X 2.5

1/2 X 3.5

3/4 X 4.0

1/4 X 2.5

3/8 X 2.5

1/2 X 3.5

3/8 X 2.5

1/2 X 3.0

3/4 X 4.0

3/4X 3-3/4

ALTINCOATED EDP#

69-2000-C

69-2020-C

69-2030-C

69-2040-C

69-2050-C

69-2060-C

69-2070-C

69-2080-C

69-2090-C

69-3000-C

69-3010-C

69-3020-C

69-3030-C

69-3040-C

69-3050-C

69-3060-C

69-3070-C

69-3080-C

69-3090-C

69-4000-C

69-4010-C

69-4020-C

69-4030-C

69-4040-C

69-4050-C

69-4060-C

69-4070-C

69-4080-C

69-4090-C

69-5000-C

69-5010-C TIP DIAMETER

LENGTH OF CUT

ANGLE

PER SIDE



CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL


ORDER

EDP#

SHANK

DIA.

SERIES 45

MAJOR

DIAMETERO.A.L.

2-1/2" 1/4

BACK-DRAFT ENDMILLS

45-1100

45-1105

45-1110

45-1115

45-1120

45-1125

45-1130

45-1135

45-1140

45-1145

45-1150

45-1155

ITI CARBIDE

3/16

BACK-DRAFT CUTTERSREVERSE TAPERED ENDMILLS


FLUTE

LENGTH


BACK-DRAFT RADIUS CUTTERSREVERSE TAPERED ENDMILLS WITH A CORNER RADIUS

REACH

LENGTH

3/8

1/2

2-1/2"

2-1/2"

3"

ORDER

EDP#

SHANK

DIA.

MAJOR

DIAMETERO.A.L.

2-1/2" 1/4

3/16

FLUTE

LENGTH

REACH

LENGTH

3/8

1/2

2-1/2"

2-1/2"

3"

RADIUS

SIZE

45-3100

45-3105

45-3110

45-3115

45-3120

45-3125

45-3130

45-3135

45-3140

45-3145

45-3150

45-3155

45-3160

45-3165

45-3170

45-3175

45-3180

45-3185

45-3190

45-3195

45-3200

45-3205

45-3210

45-3215

45-3220

45-3225

45-3230

45-3235

45-3240

45-3245

45-3250

45-3255

45-3260

1/32

1/32

1/32

1/16

1/16

1/16

1/32

1/32

1/32

1/16

1/16

1/16

1/32

1/32

1/32

1/16

1/16

1/16

3/32

3/32

3/32

1/32

1/32

1/32

1/16

1/16

1/16

3/32

3/32

3/32

1/8

1/8

1/8

55

made from

made from

1/4 3/16

1/2

3/4

1"

1/2

3/4

1"

5/8

3/4

1"

5/8

3/4

1"

3/4

1"

1-1/4

3/4

1"

1-1/4

3/4

1"

1-1/4

3/4

1"

1-1/4"

3/4

1"

1-1/4"

3/4

1"

1-1/4"

3/4

1"

1-1/4"

3/8

1/2

5/8

1/4

3/8

1/2

1/2

3/4

1"

5/8

3/4

1"

5/8

3/4

1"

5/8

3/4

1"

1/4

3/8

1/2

5/8

3/16

1/4

3/8

1/2

FLUTE

LENGTH

REACH

LENGTH

NECK DIAMETER

SHANK DIAMETER

MAJOR DIAMETER

ANGLE PER SIDE

2°

NECK

DIAMETER

.320

15° HELICAL FLUTE

SHANK DIAMETER

NECK DIAMETER

15° HELICAL FLUTE

FLUTE

LENGTH

REACH

LENGTH

RADIUS

ANGLE PER SIDE

2°

NECK

DIA.

.320

USE THESE TO GET THE

RIGHT POCKET RADIUS

WITHOUT DAMAGING THE

POCKET WALL

.210

.210

.156

.156

.425

.425



MAJOR DIA.

INTERNAL TOOL


TA

LO

G F

OU

RT

EE

N

2 & 4 FLUTE SQUARE LENGTH OF CUT

2 FLUTE EDP #

SIZE

21-7000

21-7005

21-7010

21-7015

21-7020

21-7025

21-7030

21-7035

21-7040

21-7045

21-7050

21-7055

21-7060

21-7065

21-7070

21-7075

21-7080

21-7085

21-7090

21-7095

21-7100

21-7105

21-7110

21-7115

21-7120

21-7125

21-7130

21-7135

21-7140

21-7145

21-7150

21-7155

21-7160

21-7165

21-7170

21-7175

21-7180

21-7185

21-7190

21-7195

21-7200

21-7205

21-7210

21-7215

21-7220

21-7225

.015

.018

.021

.024

.027

.030

.033

.036

.039

.042

.045

.048

.051

.054

.057

.060

.063

.066

.069

.072

.075

.078

.081

.084

.087

.090

.093

.105

.120

.135

.141

.150

.165

.180

.195

.210

.225

.240

.255

.270

.300

.315

.330

.345

.360

.375

.010

.015

.020

.025

.030

.031

.035

.040

.045

.047

.050

.055

.060

.065

.070

.075

.080

.085

.090

.095

.100

.120

LENGTH OF CUT

SIZE

21-6000

21-6005

21-6010

21-6015

21-6020

21-6025

21-6030

21-6035

21-6040

21-6045

21-6050

21-6055

21-6060

21-6065

21-6070

21-6075

21-6080

21-6085

21-6090

21-6095

21-6100

21-6105

.030

.045

.060

.075

.090

.093

.105

.120

.135

.141

.150

.165

.180

.195

.210

.225

.240

.255

.270

.285

.300

.360

.005

.006

.007

.008

.009

.010

.011

.012

.013

.014

.015

.016

.017

.018

.019

.020

.021

.022

.023

.024

.025

.026

.027

.028

.029

.030

.031

.035

.040

.045

.047

.050

.055

.060

.065

.070

.075

.080

.085

.090

.100

.105

.110

.115

.120

.125

2 & 4 FLUTE BALL

41-7000

41-7005

41-7010

41-7015

41-7020

41-7025

41-7030

41-7035

41-7040

41-7045

41-7050

41-7055

41-7060

41-7065

41-7070

41-7075

41-7080

41-7085

41-7090

41-7095

41-7100

41-7105

41-7110

41-7115

41-7120

41-7125

41-7130

41-7135

41-7140

41-7145

41-7150

41-7155

41-7160

41-7165

41-7170

41-7175

41-7180

41-7185

41-7190

41-7195

41-7200

41-7205

41-7210

41-7215

41-7220

41-7225

-- --

-- --

41-6010

41-6015

41-6020

41-6025

41-6030

41-6035

41-6040

41-6045

41-6050

41-6055

41-6060

41-6065

41-6070

41-6075

41-6080

41-6085

41-6090

41-6095

41-6100

41-6105

4 FLUTE EDP #

2 FLUTE EDP #

4 FLUTE EDP #

SERIES 21 TWO FLUTE

SERIES 41 FOUR FLUTE

56

CENTER CUTTING30° RIGHT HAND HELIX, RIGHT HAND CUT

ITI CARBIDE

ITC CARBIDE: HIGH TRANSVERSE RUPTURE STRENGTH

MICRO ENDMILLS

made from

1/8" SHANK1-1/2" OAL

CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL


41-062141-078141-094141-094241-094341-094441-098141-109141-109241-118141-125141-125241-125341-125441-125541-141141-141241-156141-156241-158141-172141-172241-187141-187241-187341-187441-187541-197141-203141-203241-218141-218241-234141-234241-236141-250141-250241-250341-250441-250541-250641-266141-266241-276141-281141-281241-297141-297241-312141-312241-312341-312441-312541-3126

1/81/81/81/81/81/81/81/81/81/81/81/81/81/81/83/163/163/163/163/163/163/163/163/163/163/163/161/41/41/41/41/41/41/41/41/41/41/41/41/41/45/165/165/165/165/165/165/165/165/165/165/165/165/16

1-1/2”1-1/2”1-1/2”1-1/2”2”2-1/2”2”2”2”2”2”2”2”2-1/2”3”2”2-1/2”2”2-1/2”2”2”2-1/2”2”2”2-1/2”2-1/2”3”2”2”2-1/2”2”2-1/2”2”2-1/2”2”2”2-1/2”3”3”4”4”2”2-1/2”2-1/2”2”2-1/2”2”2-1/2”2”2-1/2”3”3”4”4”

.200

.280

.190

.380

.500

.750

.250

.250

.500

.400

.250

.380

.500

.7501.000.380.750.380.650.380.380.650.380.650.7501.0001.300.500.400.800.400.800.400.800.500.500.8001.0001.3001.5001.800.5001.000.650.500.800.500.800.500.7501.0001.2501.5001.800

8 mm

21/64

11/329 mm

23/64

3/8

25/64

10 mm

13/32

27/64

11 mm

7/16

29/64

15/32

12 mm

31/64

1/2

.500

.750

.500

.750

.500

.750

.500

.500

.750

.500

.7501.0001.2501.5001.7502.000.7501.000.7501.000.7501.000.7501.000.750.7501.0001.800.7501.250.7501.250.7501.250.7501.250.7501.0001.2501.5001.7502.0003.0004.000

.315

.328

.344

.354

.359

.375

.391

.394

.406

.422

.433

.437

.453

.469

.472

.484

.500

.062

.078

.094

.098

.109

.118

.125

.141

.156

.158

.172

.187

.197

.203

.218

.234

.236

.250

.266

.276

.281

.297

.312

1/165/64

3/32

2.5mm

7/643mm

1/8

9/64

5/32

4mm11/64

3 /16

5mm13/64

7/32

15/64

6mm

1/4

17/647mm

9/32

19/64

5/16

A GREAT QUALITY CARBIDE ENDMILL

THE RIGHT LENGTH OF CUT FOR ANY APPLICATION

SIZE +.000/-.002

EDPNUMBER

OVERALLLENGTH

SHANK DIA.

SERIES 41 4 FLUTE

CARBIDE ENDMILLS STANDARD SIZES

AS WELL AS UNUSUAL LENGTHS AND DIAMETERS

41-315141-315241-328141-328241-344141-344241-354141-359141-359241-375141-375241-375341-375441-375541-375641-375741-391141-391241-394141-394241-406141-406241-422141-422241-433141-437141-437241-437341-453141-453241-469141-469241-472141-472241-484141-484241-500141-500241-500341-500441-500541-500641-500741-5008

2”2-1/2”2”2-1/2”2”2-1/2”2”2”2-1/2”2”2-1/23”3”4”4”4”2-1/2”3”2-1/2”3”2-1/2”3”2-1/2”3”2-1/2”2-1/23”4”2-1/2”3”2-1/2”3”2-1/2”3”2-1/2”3”2-1/2”3”3”4”4”4”6”6

LENGTHOF CUT

SIZE +.000/-.002

CENTER CUTTING30° RIGHT HAND HELIX, RIGHT HAND CUT

57

ITI CARBIDE


SOLID CARBIDE ENDMILLS

41-0621-C41-0781-C41-0941-C41-0942-C41-0943-C41-0944-C41-0981-C41-1091-C41-1092-C41-1181-C41-1251-C41-1252-C41-1253-C41-1254-C41-1255-C41-1411-C41-1412-C41-1561-C41-1562-C41-1581-C41-1721-C41-1722-C41-1871-C41-1872-C41-1873-C41-1874-C41-1875-C41-1971-C41-2031-C41-2032-C41-2181-C41-2182-C41-2341-C41-2342-C41-2361-C41-2501-C41-2502-C41-2503-C41-2504-C41-2505-C41-2506-C41-2661-C41-2662-C41-2761-C41-2811-C41-2812-C41-2971-C41-2972-C41-3121-C41-3122-C41-3123-C41-3124-C41-3125-C41-3126-C

ALTIN COATEDEDP NUMBER

SHANK DIA.

OVERALLLENGTH

LENGTHOF CUT

ALTIN COATEDEDP NUMBER

EDPNUMBER

3/83/83/83/83/83/83/83/83/83/83/83/83/83/83/83/87/167/167/167/167/167/167/167/167/167/167/167/161/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/2

41-3151-C41-3152-C41-3281-C41-3282-C41-3441-C41-3442-C41-3541-C41-3591-C41-3592-C41-3751-C41-3752-C41-3753-C41-3754-C41-3755-C41-3756-C41-3757-C41-3911-C41-3912-C41-3941-C41-3942-C41-4061-C41-4062-C41-4221-C41-4222-C41-4331-C41-4371-C41-4372-C41-4373-C41-4531-C41-4532-C41-4691-C41-4692-C41-4721-C41-4722-C41-4841-C41-4842-C41-5001-C41-5002-C41-5003-C41-5004-C41-5005-C41-5006-C41-5007-C41-5008-C

made from

SEE OUR HIGH PERFORMANCEENDMILLS ON PG-106

INTERNAL TOOL


TA

LO

G F

OU

RT

EE

NENGRAVING TOOLS

58

ENGRAVING TOOLS

ORDER

EDP#O.A.L.

SHANK

DIA.

TIPINCLUDED ANGLE

SERIES 62

1/8 2"

3/16 2-1/2

1/4 2-1/2

ORDER

EDP#O.A.L.

SHANK

DIA.

TIPINCLUDED ANGLE

62-1200

62-1205

62-1210

40°

60°

90°

2"

FINE POINTENGRAVING TOOLSTIP DIA APROX .002 SLOWER CUTTINGFOR VERY FINE CUTS

ORDER

EDP#O.A.L.

SHANK

DIA.

TIPINCLUDED ANGLE

TIP DIA APROX .015GROUND WITH INCREASED CLEARANCEFOR CUTTING ALUM, BRASS, PLASTIC ETC.

STANDARD POINT DOUBLE TOOL LIFETIP DIA APROX .015 FASTER FREE CUTTING

ORDER

EDP# O.A.L.SHANK

DIA.

TIPINCLUDED ANGLE

62-1400

62-1402

62-1405

62-1410

62-1415

62-1417

62-1420

62-1425

62-1430

62-1435

62-1437

62-1440

62-1445

62-1450

62-1455

30°

40°

60°

90°

120°

30°

40°

60°

90°

120°

30°

40°

60°

90°

120°

2"

62-1500

62-1505

62-1510

62-1520

62-1525

62-1530

62-1540

62-1545

62-1550

40°

60°

90°

40°

60°

90°

40°

60°

90°

2"

3/16

DOUBLE ENDENGRAVING TOOLS

EXTRA LONGENGRAVING TOOLS

ORDER

EDP# O.A.L.SHANK

DIA.

TIPINCLUDED ANGLE

62-1800

62-1805

62-1810

62-1815

62-1820

62-1825

62-1830

62-1835

62-1840

62-1845

62-1850

62-1855

40°

60°

90°

120°

40°

60°

90°

120°

40°

60°

90°

120°

30°

40°

60°

90°

120°

30°

40°

60°

90°

120°

30°

40°

60°

90°

120°

30°

40°

60°

90°

120°

30°

40°

60°

90°

120°

30°

40°

60°

90°

120°

STANDARD POINTTIP DIA APROX .015 FASTER FREE CUTTING

62-1095

62-1100

62-1105

62-1110

62-1115

62-1117

62-1120

62-1125

62-1130

62-1135

62-1137

62-1140

62-1145

62-1150

62-1155

62-1157

62-1160

62-1162

62-1165

62-1167

62-1170

62-1172

62-1175

62-1177

62-1180

62-1182

62-1185

62-1187

62-1190

62-1192

5/16 2-1/2

2-1/23/8

1/2 3"

1/8 4"

6"

4"3/16

1/4

1/8

3/16

1/4

1/8

1/4

2-1/2

2-1/2

SOFT MATERIAL ENGRAVING TOOLS

WE CALL THEM ENGRAVING TOOLS. BUT THEY ARE ALSO USED FOR CHAMFERING, COUNTER SINKING, TAPERED REAMING ETC.

STANDARD POINTTIP DIA APROX .015 FASTER FREE CUTTING

APPLICATION :

INCLUDED ANGLE

ANGLE PER SIDE IS INCLUDED ANGLE DIVIDED BY TWO

1/8

ITICARBIDE

ENGRAVING TOOLS


ALTINCOATED EDP#

62-1095-C

62-1100-C

62-1105-C

62-1110-C

62-1115-C

62-1117-C

62-1120-C

62-1125-C

62-1130-C

62-1135-C

62-1137-C

62-1140-C

62-1145-C

62-1150-C

62-1155-C

62-1157-C

62-1160-C

62-1162-C

62-1165-C

62-1167-C

62-1170-C

62-1172-C

62-1175-C

62-1177-C

62-1180-C

62-1182-C

62-1185-C

62-1187-C

62-1190-C

62-1192-C

62-1500-C

62-1505-C

62-1510-C

62-1520-C

62-1525-C

62-1530-C

62-1540-C

62-1545-C

62-1550-C

TINCOATED EDP#

ALTINCOATED EDP#

62-1400-C

62-1402-C

62-1405-C

62-1410-C

62-1415-C

62-1417-C

62-1420-C

62-1425-C

62-1430-C

62-1435-C

62-1437-C

62-1440-C

62-1445-C

62-1450-C

62-1455-C

ALTINCOATED EDP#

62-1200-C

62-1205-C

62-1210-C

ALTINCOATED EDP#

62-1800-C

62-1805-C

62-1810-C

62-1815-C

62-1820-C

62-1825-C

62-1830-C

62-1835-C

62-1840-C

62-1845-C

62-1850-C

62-1855-C

made from

2-1/2

2-1/2

CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL


ORDER

EDP#O.A.L.

SHANK

DIA.

TIPINCLUDED ANGLE

62-1600

62-1605

62-1610

62-1615

62-1620

62-1625

62-1630

62-1635

62-1640

40°

60°

90°

40°

60°

90°

40°

60°

90°

1/8 2"

2.53/16

1/4

ALTINCOATED EDP#

62-1600-C

62-1605-C

62-1610-C

62-1615-C

62-1620-C

62-1625-C

62-1630-C

62-1635-C

62-1640-C

SPIRAL FLUTEENGRAVING TOOLSTIP DIA APROX .004 STRONGER ANDSLICES BETTER THAN STRAIGHT FLUTE

CHISEL STYLEENGRAVING TOOLSTIP DIA APROX .002 SLOWER CUTTINGGREAT FOR CHAMFERING SMALL HOLES

RADIUS TIPENGRAVING TOOLSSTRONGER THAN POINTEDLONGER LASTING

2 FLUTEENGRAVING TOOLSBETTER FOR SLOWER RPM MACHINES

ENGRAVING TOOLS

2.5

ORDER

EDP#O.A.L.

SHANK

DIA.

TIPINCLUDED ANGLE

62-2400

62-2405

62-2410

62-2415

62-2420

62-2425

62-2430

62-2435

62-2440

40°

60°

90°

40°

60°

90°

40°

60°

90°

1/8 2"

2.53/16

1/4

ALTINCOATED EDP#

62-2400-C

62-2405-C

62-2410-C

62-2415-C

62-2420-C

62-2425-C

62-2430-C

62-2435-C

62-2440-C

2.5


ORDER

EDP# O.A.L.SHANK

DIA.

TIPINCLUDED ANGLE

62-2200

62-2205

62-2210

62-2215

62-2220

62-2225

62-2230

62-2235

62-2240

62-2250

62-2260

62-2270

62-2280

62-2290

62-2300

62-2310

30°

40°

60°

90°

1/8

1/8

1/8

1/8

2"

2"

2"

2"

ALTINCOATED EDP#

62-2200-C

62-2205-C

62-2210-C

62-2215-C

62-2220-C

62-2225-C

62-2230-C

62-2235-C

62-2240-C

62-2250-C

62-2260-C

62-2270-C

62-2280-C

62-2290-C

62-2300-C

62-2310-C

TIP RADIUS

.005

.010

.015

.020

.005

.010

.015

.020

.005

.010

.015

.020

.005

.010

.015

.020

ORDER

EDP# O.A.L.SHANK

DIA.

TIPINCLUDED ANGLE

62-2600

62-2605

62-2610

62-2615

62-2620

62-2625

62-2630

62-2635

62-2640

62-2650

62-2660

62-2670

62-2680

62-2690

30°

60°

90°

120°

2.0

2.5

2.5

2.0

2.0

2.5

2.5

2.0

2.0

2.5

2.5

2.0

2.5

2.5

ALTINCOATED EDP#

62-2600-C

62-2605-C

62-2610-C

62-2615-C

62-2620-C

62-2625-C

62-2630-C

62-2635-C

62-2640-C

62-2650-C

62-2660-C

62-2670-C

62-2680-C

62-2690-C

WEB THICKNESS

.005

.005

.005

.005

.010

.005

.005

.005

.010

.005

.005

.005

.005

.005

1/8

3/16

1/4

1/8

1/8

3/16

1/4

1/8

1/8

3/16

1/4

1/8

3/16

1/4

59

ENGRAVING TOOLS



SERIES 62 ITI CARBIDEmade from SERIES 62 ITI CARBIDEmade from


HP USER

Rectangle

HP USER

Text Box

missouricarbide.com

INTERNAL TOOL


TA

LO

G F

OU

RT

EE

N

ORDER

EDP#

NECK

DIAMETER

SHANK

DIA.

HEAD

DIA.

SERIES 65

HEAD

WIDTH

.120 .072 .075 2"

NECK

LENGTH

OVERALL

LENGTH

1/8

.180 .093 .100 2-1/2 3/16

.240 .093 .165 2-1/2 1/4

.310 .093 .200 2-1/2 5/16

.360 .125 .250 2-1/2 3/8

.490 .156 .350 3" 1/2

CHAMFER

SIZE

.020

.032

.062

.032

.032

EDGE BREAKERS OUTSIDE DIAMETER AND CHAMFERS WILL CUT

NECKLENGTH

90°INCLUDED

HEAD DIA.

OVERALLLENGTH

HEADWIDTH

BREAK EDGESON SLOTS

BREAK EDGESON HOLES

BREAK EDGESON ANY SHAPE

APPLICATION : FOR EDGE BREAKING / CHAMFERING.

65-118065-118565-119065-119565-119765-120065-120565-121065-121565-122065-122565-123065-123565-124065-124565-125065-125565-126065-126565-127065-127565-128065-128565-129065-129565-1300

.187

.375

.187

.375

.500

.250

.500

.250

.500

.7501.000.250.500.7501.000.250.500.7501.000.250.500.7501.000.500.7501.000

ITI CARBIDE

ALTINCOATED EDP#

65-1180-C65-1185-C65-1190-C65-1195-C65-1197-C65-1200-C65-1205-C65-1210-C65-1215-C65-1220-C65-1225-C65-1230-C65-1235-C65-1240-C65-1245-C65-1250-C65-1255-C65-1260-C65-1265-C65-1270-C65-1275-C65-1280-C65-1285-C65-1290-C65-1295-C65-1300-C

made from

60

CNC BACK-SPOT FACERS

SERIES 66

ORDER EDP#

ALTIN COATED SHANKREACH

.375

.625

.375

.625

.500

.750

.500

.750

.500

.7501.000.500.7501.0001.250.500.7501.0001.250

.225

.530

3/8

5/16

1/4

1/2

3/16

.085

.100

.130

.190

.225

HEAD DIAMETER

HEAD THICKNESS

REACH

OFFSET

HEAD DIAMETER

HEADTHICKNESS

3/32

1/8

1/8

APPLICATION : USED TO CREATE A C'BORE ON THE BACK SIDE ORINSIDE OF A PART USING CIRCULAR INTERPOLATION ON A CNC MILL

OVERALL LENGTH

2-1/2

2-1/2

2-1/2

2-1/2

3"

5/32

3/16

66-110066-110566-111066-111566-112066-112566-113066-113566-114066-114566-115066-115566-116066-116566-117066-117566-118066-118566-1190

3/4

1/8

3/32

.270

.370

.435

.065

.050

5/8 3-1/2

4"

.180

.135

ITI CARBIDE

OFFSET

C'BORE DIAMETER

3°

1°TYP.


MAXIMUMC'BORE DIA.

.235

.310

.395

.470

.630

.815

.980

made from

66-1100-C66-1105-C66-1110-C66-1115-C66-1120-C66-1125-C66-1130-C66-1135-C66-1140-C66-1145-C66-1150-C66-1155-C66-1160-C66-1165-C66-1170-C66-1175-C66-1180-C66-1185-C66-1190-C

.090

1/8 2"

.045 .060 .015

.075 .050 .012.040

2" 1/8

.046

CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL


SERIES 67

REVERSE CORNER ROUNDERS

HEAD DIA.

OVERALLLENGTH

NECKLENGTH

NECKDIAMETER

SHANKDIAMETER

HEADWIDTH

RADIUS

ORDER

EDP#

ALTIN

COATED

NECK

DIAMETER

SHANK

DIA.

HEAD

DIA.

HEAD

WIDTH

NECK

LENGTH

OVERALL

LENGTH

RADIUS

SIZE

67-140067-140567-141067-141567-142067-142567-143067-143567-144067-144567-145067-145567-146067-146567-147067-147567-148067-148567-149067-149567-150067-1505

.031.187 .110 3/16

.047.250 .140 1/4

.062.312 .170 5/16 1/16

.093.375 .170 3/8 2-1/2

.125.500 .230 1/2 3"

.187 .230 5/8 3/32 3-1/2

APPLICATION : FOR ROUNDING BACK OR INSIDE CORNERSITI CARBIDE

ITI CARBIDE: HIGH TRANSVERSE RUPTURE STRENGTH

DOUBLE CHAMFER CUTTERSORDER

EDP#

TOP

WIDTH

SHANK

DIA.

OVERALL

LENGTH

72-1000

72-1020

72-1030

72-1040

72-1050

72-1060

72-1070

72-1080

72-1090

72-2000

.100

.135

.160

.200

.260

.320

.375

.510

.635

.760

2-1/2

2-1/2

2-1/2

3"

3"

3"

3"

3"

3"

4"

.250

.312

.375

.500

.500

.500

.500

.500

.500

.500

SERIES 72 APPLICATION : FOR CHAMFERING BOTH SIDES OF A PART OR PLATEITI CARBIDE

BOTTOM

WIDTH

.020

.023

.028

.042

.089

.149

.214

.339

.464

.569

BOTTOM WIDTH

TOP WIDTH

1/16

3/8 LENGTH OF CUT ON OD

90°

4 FLUTE

BOLDLINES CUT

SHANK DIAMETER

FORM

DEPTH

FORMDEPTH

1/64 RAD'S

.044

.050

.060

.080

.080

.080

.080

.080

.080

.100

.625

made from

made from

67-1400-C67-1405-C67-1410-C67-1415-C67-1420-C67-1425-C67-1430-C67-1435-C67-1440-C67-1445-C67-1450-C67-1455-C67-1460-C67-1465-C67-1470-C67-1475-C67-1480-C67-1485-C67-1490-C67-1495-C67-1500-C67-1505-C

.250

.500

.750

.375

.625

.875

.375

.625

.8751.000.500.7501.0001.250.500.7501.0001.250.500.7501.0001.250

3/32

3/32

1/16

1/16

2-1/2

2-1/2

2-1/2

ALTIN

COATED

72-1000-C

72-1020-C

72-1030-C

72-1040-C

72-1050-C

72-1060-C

72-1070-C

72-1080-C

72-1090-C

72-2000-C

INTERNAL TOOL


TA

LO

G F

OU

RT

EE

N

62

CHAMFERING ENDMILLS

ANGLE

LENGTH

2 FLUTE

SINGLE END

CHAMFER MILLS

UN-COATED

EDP#

SHANK

DIA.

2"2-1/22-1/22-1/22-1/23"2"2-1/22-1/22-1/22-1/23"2"2-1/22-1/22-1/22-1/23"2"2-1/22-1/22-1/22-1/23"2"2-1/22-1/22-1/22-1/23"2"2-1/22-1/22-1/22-1/23"2"2-1/22-1/22-1/22-1/23"2"2-1/22-1/22-1/22-1/23"2"2-1/22-1/22-1/22-1/23"


INCLUDED

ANGLE

1/83/161/45/163/81/21/83/161/45/163/81/21/83/161/45/163/81/21/83/161/45/163/81/21/83/161/45/163/81/21/83/161/45/163/81/21/83/161/45/163/81/21/83/161/45/163/81/21/83/161/45/163/81/2

OVERALL

LENGTH

APPLICATION :

ITI CARBIDE

64-274064-275064-276064-277064-278064-279064-279564-280064-281064-282064-283064-284064-284564-285064-286064-287064-288064-289064-289264-289464-289564-289664-289764-289864-289964-290064-291064-292064-293064-294064-721064-721564-722064-722564-723064-723564-723764-723864-724064-724564-725064-725564-725764-725864-726064-726564-727064-727564-728064-728564-729064-729564-730064-7305

ALTINCOATED EDP#

.012

.021

.030

.039

.047

.064

.035

.050

.060

.090

.105

.140

.060

.090

.125

.156

.187

.250

.070

.105

.140

.180

.200

.280

.105

.160

.200

.270

.312

.420

.130

.195

.250

.310

.375

.500

.145

.220

.280

.350

.430

.580

.165

.250

.320

.405

.490

.660

.215

.340

.460

.580

.690

.920

SERIES 64 2 FLUTE

GROUND WITH POSITIVE AXIALRAKE & CLEARANCEPRIMARILY FOR ALUMINUM &SOFTER MATERIALS

SHANK

DIA.

.012

.021

.030

.039

.047

.064

.035

.050

.060

.090

.105

.140

.060

.090

.125

.156

.187

.250

.070

.105

.140

.180

.200

.280

.105

.160

.200

.270

.312

.420

.130

.195

.250

.310

.375

.500

.145

.220

.280

.350

.430

.580

.165

.250

.320

.405

.490

.660

.215

.340

.460

.580

.690

.920

2"2-1/22-1/22-1/22-1/23"2"2-1/22-1/22-1/22-1/23"2"2-1/22-1/22-1/22-1/23"2"2-1/22-1/22-1/22-1/23"2"2-1/22-1/22-1/22-1/23"2-1/22-1/22-1/23"2-1/22-1/22"2-1/22-1/23"2-1/22-1/22"2-1/22-1/22-1/22-1/23"2"2-1/22-1/22-1/22-1/23"

64-473064-474064-475064-476064-478064-479064-479564-480064-481064-482064-483064-484064-484564-485064-486064-487064-488064-489064-489164-489264-489364-489464-489564-489664-489864-490064-491064-492064-493064-494064-738064-739064-740064-740264-741064-741564-741664-741864-742064-742564-743064-743564-743864-743964-744064-744564-745064-745564-746064-746564-747064-747564-748064-7485

120°4 flute

INCLUDED

ANGLE

ANGLE

LENGTH

1/83/161/45/163/81/21/83/161/45/163/81/21/83/161/45/163/81/21/83/161/45/163/81/21/83/161/45/163/81/21/83/161/45/163/81/21/83/161/45/163/81/21/83/161/45/163/81/21/83/161/45/163/81/2

OVERALL

LENGTH

SERIES 64 4 FLUTE


ALTINCOATED EDP#

UN-COATED

EDP#

90°4 flute

60°4 flute

50°4 flute

45°4 flute

40°4 flute

60° PER SIDE

45° PER SIDE

30° PER SIDE

25° PER SIDE

22.5° PER SIDE

20° PER SIDE

60°2 flute

30° PER SIDE

90°2 flute

45° PER SIDE

120°2 flute

60° PER SIDE

50°2 flute

45°2 flute

40°2 flute

4 FLUTE

SINGLE END

CHAMFER MILLSGROUND WITH POSITIVE AXIALRAKE & CLEARANCEPRIMARILY FOR STEEL &TOUGHER MATERIALS

APPLICATION :

ITI CARBIDE

25° PER SIDE

22.5° PER SIDE

20° PER SIDE

made from made fromSINGLE END

CHAMFERMILLS

30°2 flute

15° PER SIDE

82°2 flute41° PER SIDE

150°2 flute

75° PER SIDE

150°4 flute

75° PER SIDE


30°4 flute

15° PER SIDE

30°

60°

45°

45°

41°

49°

60°

30°

75°

15°

65°

25°

67.5°

22.5°

70°

20°

15°

75°



HP USER

Rectangle

HP USER

Text Box

missouricarbide.com

CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL


OVERALL

LENGTH

SHANK

DIA.

.050

.060

.090

.105

.140

.090

.125

.156

.187

.250

.160

.200

.270

.312

.420

64-880064-881064-882064-883064-884064-885064-886064-887064-888064-889064-890064-891064-892064-893064-8940

INCLUDED

ANGLE

3/161/45/163/81/23/161/45/163/81/23/161/45/163/81/2

4"4"4"6"6"4"4"4"6"6"4"4"4"6"6"

ITI CARBIDE

ANGLE

LENGTH

ALTINCOATED EDP#

64-8800-C64-8810-C64-8820-C64-8830-C64-8840-C64-8850-C64-8860-C64-8870-C64-8880-C64-8890-C64-8900-C64-8910-C64-8920-C64-8930-C64-8940-C

SHANK

DIA.

.050

.060

.090

.105

.140

.090

.125

.156

.187

.250

.160

.200

.270

.312

.420

4"4"4"6"6"4"4"4"6"6"4"4"4"6"6"

64-680064-681064-682064-683064-684064-685064-686064-687064-688064-689064-690064-691064-692064-693064-6940

INCLUDED

ANGLE ANGLE

LENGTH

3/161/45/163/81/23/161/45/163/81/23/161/45/163/81/2

OVERALL

LENGTH

ITI CARBIDE

UN-COATED

EDP#

ALTINCOATED EDP#

UN-COATED

EDP#


CHAMFER

C'SINK

EDGEBREAK

NOW AVAILABLE WITHALTIN COATING

INCLUDED ANGLE


ANGLE LENGTH

ITI CARBIDE: PREMIUM SUBMICRON GRADE CARBIDE

2 FLUTE LONG REACH

CHAMFER MILLS

APPLICATION :GROUND WITH POSITIVE AXIALRAKE & CLEARANCEPRIMARILY FOR ALUMINUM &SOFTER MATERIALS

APPLICATION :GROUND WITH POSITIVEAXIAL RAKE & CLEARANCEPRIMARILY FOR STEEL & TOUGHERMATERIALS


90°4 flute

60°4 flute

45° PER SIDE

30° PER SIDE



60°2 flute

30° PER SIDE

SERIES 64 4 FLUTE LONGSERIES 64 2 FLUTE LONG

4 FLUTE LONG REACH

CHAMFER MILLS

made frommade from

LONG SINGLE END

OVERALL

LENGTH

SHANK

DIA.

.050

.060

.090

.105

.140

.090

.125

.156

.187

.250

.160

.200

.270

.312

.420

INCLUDED

ANGLE

3/161/45/163/81/23/161/45/163/81/23/161/45/163/81/2

4"4"4"6"6"4"4"4"6"6"4"4"4"6"6"

ITI CARBIDE

ANGLE

LENGTH

ALTINCOATED EDP#


SHANK

DIA.

.050

.060

.090

.105

.140

.090

.125

.156

.187

.250

.160

.200

.270

.312

.420

4"4"4"6"6"4"4"4"6"6"4"4"4"6"6"

INCLUDED

ANGLE

ANGLE

LENGTH

3/161/45/163/81/23/161/45/163/81/23/161/45/163/81/2

OVERALL

LENGTH

ITI CARBIDE

UN-COATED

EDP#

ALTINCOATED EDP#

UN-COATED

EDP#


CHAMFER

C'SINK

EDGE BREAK

INCLUDED ANGLE


ANGLE LENGTH2 FLUTE LONG REACH

CHAMFER MILLS

APPLICATION :GROUND WITH POSITIVE AXIALRAKE & CLEARANCEPRIMARILY FOR ALUMINUM &SOFTER MATERIALS

APPLICATION :GROUND WITH POSITIVEAXIAL RAKE & CLEARANCEPRIMARILY FOR STEEL & TOUGHERMATERIALS


90°4 flute

60°4 flute

45° PER SIDE

30° PER SIDE




SERIES 64 4 FLUTE LONGSERIES 64 2 FLUTE LONG

4 FLUTE LONG REACH

CHAMFER MILLS

made from

made from

LONG DOUBLE END

CHAMFERING ENDMILLS

64-900064-901064-902064-903064-904064-905064-906064-907064-908064-909064-910064-911064-912064-913064-9140

64-915064-916064-917064-918064-919064-920064-921064-922064-923064-924064-925064-926064-927064-928064-9290

63

CHAMFERMILLS

IF YOU ARE LOOKING TO MAKE THE MOST OUT OF YOURTOOL'S LIFE THEN TRY OUT OUR DOUBLE ENDCUTTERS! TWO TOOLS IN ONE! AND COSTS LESS THENTHE SINGLE END!

INTERNAL TOOL


TA

LO

G F

OU

RT

EE

N

SHANK DIA.

INCLUDED ANGLE

2 FLUTE DOUBLE ENDCHAMFER MILLS

GROUND WITH POSITIVE AXIAL RAKE & CLEARANCEPRIMARILY FOR ALUMINUM & SOFTER MATERIALS

ANGLELENGTH

.007

.012

.019

.025

.030

.040

.012

.021

.030

.039

.047

.064

.035

.050

.060

.090

.105

.140

.180

.050

.075

.100

.130

.155

.205

.260

.060

.090

.125

.156

.187

.250

.310

.370

.490

.070

.105

.140

.180

.200

.280

.350

.105

.160

.200

.270

.312

.420

.540

64-111564-112064-112564-113064-113564-114064-114564-115064-115564-116064-116564-117064-117564-118064-120064-120364-120564-121064-121164-220064-220564-221064-221564-222064-222564-223064-121264-121364-121564-121764-122064-122564-122664-122964-123164-122464-122764-123064-123264-123564-124064-124164-123964-124264-124564-124764-125064-125564-1260

1/83/161/45/163/81/21/83/161/45/163/81/21/83/161/45/163/81/25/81/83/161/45/163/81/25/81/83/161/45/163/81/25/83/41"1/83/161/45/163/81/25/81/83/161/45/163/81/25/8

2"2-1/22-1/22-1/22-1/23"2"2-1/22-1/22-1/22-1/23"2"2-1/22-1/22-1/22-1/23"3-1/22"2-1/22-1/22-1/22-1/23"3-1/22"2-1/22-1/22-1/22-1/23"3-1/24"4"2"2-1/22-1/22-1/22-1/23"3-1/22"2-1/22-1/22-1/22-1/23"3-1/2

120°2 flute

100°2 flute

90°2 flute

82°2 flute

60°2 flute

APPLICATION :

OVERALL LENGTH

SERIES 64 2 FLUTE ITI CARBIDE

UN-COATED

EDP#

ALTIN COATED EDP#

64-1115-C64-1120-C64-1125-C64-1130-C64-1135-C64-1140-C64-1145-C64-1150-C64-1155-C64-1160-C64-1165-C64-1170-C64-1175-C64-1180-C64-1200-C64-1203-C64-1205-C64-1210-C64-1211-C64-2200-C64-2205-C64-2210-C64-2215-C64-2220-C64-2225-C64-2230-C64-1212-C64-1213-C64-1215-C64-1217-C64-1220-C64-1225-C64-1226-C64-1229-C64-1231-C64-1224-C64-1227-C64-1230-C64-1232-C64-1235-C64-1240-C64-1241-C64-1239-C64-1242-C64-1245-C64-1247-C64-1250-C64-1255-C64-1260-C


made from


60° PER SIDE


50° PER SIDE

45° PER SIDE

41° PER SIDE

30° PER SIDE

CHAMFER

C'SINK

EDGE BREAK

75°

15°

10°

80°

30°

60°

40°

50°

45°

45°

41°

49°

60°

30°

ANGLE LENGTH

INCLUDED ANGLE+/- 1/2 DEGREE

CHAMFER M

ILLS

CHAMFERING ENDMILLS


64

CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL


GROUND WITH RAKE & CLEARANCEFOR STEEL & TOUGHER MATERIALS

CHAMFER

C'SINK

EDGEBREAK

4 FLUTE DOUBLE ENDCHAMFER MILLS

SERIES 64 4 FLUTE

APPLICATION :

CHAMFERING ENDMILLS


64-133064-133564-134064-134564-135064-135564-136064-136564-137064-137564-138064-138564-139064-139564-140064-140364-140564-141064-141164-440064-440564-441064-441564-442064-442564-443064-141264-141364-141564-141764-142064-142564-142664-142964-143164-142464-142764-143064-143264-143564-144064-144164-143964-144264-144564-144764-145064-145564-1460

64-1330-C64-1335-C64-1340-C64-1345-C64-1350-C64-1355-C64-1360-C64-1365-C64-1370-C64-1375-C64-1380-C64-1385-C64-1390-C64-1395-C64-1400-C64-1403-C64-1405-C64-1410-C64-1411-C64-4400-C64-4405-C64-4410-C64-4415-C64-4420-C64-4425-C64-4430-C64-1412-C64-1413-C64-1415-C64-1417-C64-1420-C64-1425-C64-1426-C64-1429-C64-1431-C64-1424-C64-1427-C64-1430-C64-1432-C64-1435-C64-1440-C64-1441-C64-1439-C64-1442-C64-1445-C64-1447-C64-1450-C64-1455-C64-1460-C

SHANK DIA.

INCLUDED ANGLE

ANGLELENGTH

1/83/161/45/163/81/21/83/161/45/163/81/21/83/161/45/163/81/25/81/83/161/45/163/81/25/81/83/161/45/163/81/25/83/41"1/83/161/45/163/81/25/81/83/161/45/163/81/25/8

2"2-1/22-1/22-1/22-1/23"2"2-1/22-1/22-1/22-1/23"2"2-1/22-1/22-1/22-1/23"3-1/22"2-1/22-1/22-1/22-1/23"3-1/22"2-1/22-1/22-1/22-1/23"3-1/24"4"2"2-1/22-1/22-1/22-1/23"3-1/22"2-1/22-1/22-1/22-1/23"3-1/2

120°4 flute

100°4 flute

90°4 flute

82°4 flute

60°4 flute

OVERALL LENGTH

ITI CARBIDE

UN-COATED

EDP#

ALTIN COATED EDP#

made from


60° PER SIDE


50° PER SIDE

45° PER SIDE

41° PER SIDE

30° PER SIDE

75°

15°

10°

80°

30°

60°

40°

50°

45°

45°

41°

49°

60°

30°

ANGLE LENGTH

INCLUDED ANGLE+/- 1/2 DEGREE

CHAMFER M

ILLS


.007

.012

.019

.025

.030

.040

.012

.021

.030

.039

.047

.064

.035

.050

.060

.090

.105

.140

.180

.050

.075

.100

.130

.155

.205

.260

.060

.090

.125

.156

.187

.250

.310

.370

.490

.070

.105

.140

.180

.200

.280

.350

.105

.160

.200

.270

.312

.420

.540

INTERNAL TOOL


TA

LO

G F

OU

RT

EE

N

ORDER

EDP#SHANK

DIA.

MINOR

DIAMETER

RADIUS

SIZE

2" 1/8

2"

1/4

2-1/2" 3/8

3" 1/2

3-1/2" 5/8

68-1500

68-1505

68-1510

68-1515

68-1520

68-1525

68-1530

68-1535

68-1540

68-1545

68-1550

68-1555

68-1560

68-1565

68-1570

68-1575

68-1580

68-1585

68-1590

68-1595

68-1600

.0050

.0079 (0.2 MM)

.0100

.0118 (0.3 MM)

.0150

.0157 (0.4 MM)

.0197 (0.5 MM)

.0200

.0236 (0.6 MM)

.0250

.0276 (0.7 MM)

.0300

.0312 (1/32)

.0315 (0.8 MM)

.0354 (0.9 MM)

.0394 (1.0 MM)

.0469 (3/64)

.0500

.0591 (1.5MM)

.0600

.0625 (1/16)

.040

.040

.040

.040

.040

.040

.040

.040

.040

.040

.040

.040

.040

.040

.040

.040

.040

.040

.040

.040

.040

3/16

5/16 2-1/2"

2-1/2"

66 QUALITY TOOLING MADE IN THE USA

APPLICATION : USE IN TIGHT SPOTS WHERE THE TIP DIAMETERNEEDS TO BE SMALLEROR IN SOFTER MATERIALS THATCAN TAKE HIGHER RPMS


CORNER ROUNDING ENDMILLS

made from

CORNER R

OUNDERS

2 FLUTECORNER ROUNDING ENDMILLS

.0781 (5/64)

.0787 (2.0 MM)

.0938 (3/32)

.0984 (2.5 MM)

.1094 (7/64)

.1181 (3.0 MM)

.1250 (1/8)

.1378 (3.5 MM)

.1406 (9/64)

.1562 (5/32)

.1575 (4.0 MM)

.1719 (11/64)

.1772 (4.5 MM)

.1875 (3/16)

.1969 (5.0 MM)

.2031 (13/64)

.2165 (5.5 MM)

.2188 (7/32)

.2344 (15/64)

.2362 (6.0 MM)

.2500 (1/4)

.040

.040

.040

.040

.055

.055

.055

.055

.055

.055

.055

.055

.055

.055

.055

.055

.055

.055

.105

.105

.105

68-1605

68-1610

68-1615

68-1620

68-1625

68-1630

68-1635

68-1640

68-1645

68-1650

68-1655

68-1660

68-1665

68-1670

68-1675

68-1680

68-1685

68-1690

68-1695

68-1700

68-1705

ORDER

EDP#

SHANK

DIA.

MINOR

DIAMETER

RADIUS

SIZE

ALTINCOATED EDP#

68-1605-C

68-1610-C

68-1615-C

68-1620-C

68-1625-C

68-1630-C

68-1635-C

68-1640-C

68-1645-C

68-1650-C

68-1655-C

68-1660-C

68-1665-C

68-1670-C

68-1675-C

68-1680-C

68-1685-C

68-1690-C

68-1695-C

68-1700-C

68-1705-C

68-1500-C

68-1505-C

68-1510-C

68-1515-C

68-1520-C

68-1525-C

68-1530-C

68-1535-C

68-1540-C

68-1545-C

68-1550-C

68-1555-C

68-1560-C

68-1565-C

68-1570-C

68-1575-C

68-1580-C

68-1585-C

68-1590-C

68-1595-C

68-1600-C

ALTINCOATED EDP#

ORDER

EDP#

SHANK

DIA. MINOR

DIAMETER

RADIUS

SIZE

4"

1/8 3"

1/4

170-1000

170-1010

170-1020

170-1030

170-1040

170-1050

170-1060

170-1070

170-1080

170-1090

170-1100

170-1110

170-1120

170-1130

170-1140

170-1150

.0100

.0156 (1/64)

.0200

.0312 (1/32)

.0156 (1/64)

.0312 (1/32)

.0625 (1/16)

.0100

.0156 (1/64)

.0200

.0312 (1/32)

.0394 (1MM)

.0469 (3/64)

.0591 (1.5MM)

.0625 (1/16)

.0700

.100

.090

.080

.060

.040

.040

.060

.140

.140

.140

.140

.140

.140

.090

.090

.090

3/16 4"

ALTINCOATED EDP#

4" 3/8

6" 1/2

.0781 (5/64)

.0787 (2MM)

.0938 (3/32)

.0984 (2.5MM)

.1094 (7/64)

.1181 (3MM)

.1250 (1/8)

.1400 (9/64)

.1562 (5/32)

.1575 (4MM)

.1718 (11/64)

.1875 (3/16)

.234 (15/64)

.2362 (6MM)

.250 (1/4)

.115

.115

.115

.115

.115

.115

.115

.120

.120

.120

.120

.120

.105

.105

.105

170-1160

170-1170

170-1180

170-1190

170-1200

170-1210

170-1220

170-1230

170-1240

170-1250

170-1260

170-1270

170-1280

170-1290

170-1300

ORDER

EDP#

SHANK

DIA.

MINOR

DIAMETER

RADIUS

SIZE

ALTINCOATED EDP#

SERIES 170 LONG REACH CORNER ROUNDERS3 FLUTE CORNER ROUNDING ENDMILLS


170-1000-C

170-1010-C

170-1020-C

170-1030-C

170-1040-C

170-1050-C

170-1060-C

170-1070-C

170-1080-C

170-1090-C

170-1100-C

170-1110-C

170-1120-C

170-1130-C

170-1140-C

170-1150-C

170-1160-C

170-1170-C

170-1180-C

170-1190-C

170-1200-C

170-1210-C

170-1220-C

170-1230-C

170-1240-C

170-1250-C

170-1260-C

170-1270-C

170-1280-C

170-1290-C

170-1300-C

5/8 6"

SINGLE END

OVERALL

LENGTH

OVERALL

LENGTH

DOUBLE END

OVERALL

LENGTH

OVERALL

LENGTH

CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL


ORDER

EDP#

SHANK

DIA. MINOR

DIAMETER

RADIUS

SIZE

2" 1/8

2-1/2" 1/4

2-1/2" 3/8

3" 1/2

3-1/2" 5/8

4" 3/4

68-1200

68-1205

68-1210

68-1215

68-1220

68-1221

68-1222

68-1223

68-1225

68-1230

68-1235

68-1240

68-1245

68-1250

68-1255

68-1260

68-1265

68-1270

68-1275

68-1280

68-1285

68-1290

.010

.0156 (1/64)

.020

.025

.0312 (1/32)

.0156 (1/64)

.0312 (1/32)

.0625 (1/16)

.010

.0156 (1/64)

.020

.025

.0312 (1/32)

.035

.0394 (1MM)

.0469 (3/64)

.050

.055

.0591 (1.5MM)

.0625 (1/16)

.070

.075

.100

.090

.080

.070

.060

.040

.040

.060

.140

.140

.140

.140

.140

.140

.140

.140

.140

.090

.090

.090

.090

.090

3/16 2"

ALTINCOATED EDP#

68-1200-C

68-1205-C

68-1210-C

68-1215-C

68-1220-C

68-1221-C

68-1222-C

68-1223-C

68-1225-C

68-1230-C

68-1235-C

68-1240-C

68-1245-C

68-1250-C

68-1255-C

68-1260-C

68-1265-C

68-1270-C

68-1275-C

68-1280-C

68-1285-C

68-1290-C

3 FLUTECORNER ROUNDING ENDMILLS

USE IN STEEL OR TOUGHER MATERIALSALSO AVAILABLE ALTIN COATED

1" 4"

CORNER R

OUNDERS

.0781 (5/64)

.0787 (2MM)

.0938 (3/32)

.0984 (2.5MM)

.1094 (7/64)

.1181 (3MM)

.125 (1/8)

.140 (9/64

.1562 (5/32)

.1575 (4MM)

.1718 (11/64)

.1875 (3/16)

.1969 (5MM)

.2031 (13/64)

.2188 (7/32)

.2344 (15/64)

.2362 (6MM)

.250 (1/4)

.2812 (9/32)

.2969 (19/64)

.3125 (5/16)

.3281 (21/64)

.3438 (11/32)

.375 (3/8)

.115

.115

.115

.115

.115

.115

.115

.120

.120

.120

.120

.120

.120

.120

.120

.120

.120

.120

.120

.120

.120

.240

.240

.240

68-1295

68-1297

68-1300

68-1302

68-1305

68-1307

68-1310

68-1312

68-1315

68-1317

68-1320

68-1325

68-1327

68-1330

68-1335

68-1340

68-1342

68-1345

68-1350

68-1352

68-1355

68-1360

68-1365

68-1370

68-1295-C

68-1297-C

68-1300-C

68-1302-C

68-1305-C

68-1307-C

68-1310-C

68-1312-C

68-1315-C

68-1317-C

68-1320-C

68-1325-C

68-1327-C

68-1330-C

68-1335-C

68-1340-C

68-1342-C

68-1345-C

68-1350-C

68-1352-C

68-1355-C

68-1360-C

68-1365-C

68-1370-C

ORDER

EDP#SHANK

DIA.

MINOR

DIAMETER

RADIUS

SIZE

ALTINCOATED EDP#

67


MINORDIAMETER

SHANK DIA.

RADIUS SIZE

RADIUS HAS A 2° FLAREON TIP AND SIDES TO KEEP FROMGOUGING YOUR PART



APPLICATION :

DOUBLE ENDOVERALL

LENGTH

OVERALL

LENGTH

INTERNAL TOOL


TA

LO

G F

OU

RT

EE

N

68

ORDER

EDP#SHANK

DIA.

MINOR

DIAMETER RADIUS

SIZEO.A.L. # OF

FLUTES

1/4

3/8

1/2

5/8

1"

.0100

.0150

.0200

.0312 (1/32)

.0312 (1/32)

.0394 (1MM)

.0469 (3/64)

.0591 (1.5MM)

.0625 (1/16)

.0625 (1/16)

.0700

.0750

.0781 (5/64)

.0787 (2MM)

.0938 (3/32)

.0984 (2.5MM)

.1094 (7/64)

.1181 (3MM)

.1250 (1/8)

.1250 (1/8)

.1562 (5/32)

.1875 (3/16)

.1250 (1/8)

.1562 (5/32)

.1575(4MM)

.1875 (3/16)

.1969 (5MM)

.2031 (13/64)

.2188 (7/32)

.2344 (15/64)

.2362 (6MM)

.2500 (1/4)

6

6

6

6

6

6

6

6

6

5

5

5

5

5

5

5

5

5

5

5

5

5

6

6

6

6

6

6

6

6

6

6

0.199

0.189

0.179

0.157

0.282

0.265

0.250

0.226

0.219

0.3440.329

0.319

0.3120.311

0.281

0.2720.251

0.233

0.2190.343

0.281

0.2190.719

0.656

0.6570.594

0.575

0.5630.533

0.501

0.496

0.469

168-1000

168-1005

168-1010

168-1015

168-1020

168-1025

168-1030

168-1035

168-1040168-1045

168-1050

168-1055168-1060

168-1065

168-1070168-1075

168-1080

168-1085168-1090

168-1095168-1100

168-1105

168-1110168-1115

168-1120

168-1125168-1130

168-1135

168-1140168-1145

168-1150

168-1155

2-1/2"

3"

3-1/2"

4"

MAX ROUNDERCORNER ROUNDING ENDMILLS


MINORDIAMETER

SHANK DIA.

RADIUS SIZE

RADIUS HAS A 2° FLAREON TIP AND SIDES TO KEEP FROMGOUGING YOUR PART

APPLICATION : MILLING TOUGH MATERIALS STAINLESS,TITANIUM, 4140, 4340, D2, NICKEL, MONEL, INCONEL ECT.

ALL TOOLS ARE DOUBLE ENDAND ALTIN COATED

CORNER R

OUNDERS



CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL


CORNER R

OUNDERS

MADE TO O

RDER

MAJO

R DIAMETER

OVERALL LENGTH

IF NOT SURE W

E W

ILL

QUOTE STANDARD

RADIUS SIZE

Sim

ply m

ake

a copy

fill in th

e in

form

atio

n below and fa

x or email to

us. fax # 909-392-2627

we will quote as so

on as poss

ible. IN

FO@

internalto

ol.c

om

Any dim

ension your n

ot sure of leave

blank we will quote standard.

fill in sheet is Also ava

ilable at Internalto

ol.c

om

Quote in

quantites of ?

THE M

ORE Y

OU B

UY

THE C

HEAPER T

HEY G

ET

Com

pany

nam

e

Con

tact

Pho

ne

Fax

Your d

istributor

ANGLE 'B

'

ANGLE 'A

'

TIP DIAMETER

# O

F FLUTES

WOULD Y

OU LIKE D

OUBLE

END O

R S

INGLE E

ND

ITICARBIDE

INTERNAL TOOL

TOLE

RANCE U

NLE

SS

OTHERWISE SPECIFIED

.X = +/- 1/32

.XX = +/- .010

.XXX = +/- .002

.XXXX = /- .0005

ANGLES +

/- 0.15°

REVISIONS:

DRAWN BY:

REV:

TOOL NUMBER:

DATE:

LENGTH

SPECIAL CORNER ROUNDING ENDMILLS

CORNER R

OUNDERS

ON THE WEB: WWW.INTERNALTOOL.COM 69


http://internaltool.com/


HP USER

Rectangle

HP USER

Text Box

missouricarbide.com

INTERNAL TOOL


TA

LO

G F

OU

RT

EE

N

70

ORDER

EDP#

SHANK

DIA.

SERIES 76

CUTTER DIAMETER

OVERALL

LENGTHWIDTH

NECK

DIAMETER

NECK

LENGTH

# OF

TEETH

2-1/2.200 3/8 3/8 4

3".250 3/8 1/2 6

.150 5/16 5/16 4 2-1/2

+.000 / -.005

.0150

.0312

.0625

.0150

.0312

.0625

.0938

.1250

.0312

.0625

.0938

.1250

.1875

.0312

.0625

.0938

.1250

.1562

.1875

.2500

SOFT MATERIAL CUTTINGSOLID CARBIDE KEY CUTTERS

.125 1/4 1/4 4

ITI CARBIDE

APPLICATION : ALL CLEARANCE ANGLES, RAKE ANGLES AND DISH CLEARANCE SPECIFICALLY ENGINEEREDAND DESIGNED FOR CUTTING SOFTER MATERIALS ALUMINUM, PLASTICS, ETC.

HEAD DIA.+.000 / -.005

NECK LENGTH+.030 / -.000

WIDTH+.0005 / - .000

OVERALLLENGTH

5/16"DIAMETER

3/8"DIAMETER

1/2"DIAMETER

FORALUMINUM

FORPLASTICS

FORCOPPER

KEY CUTTERS FORSOFTER MATERIALS


2-1/2

76-140076-143576-145576-146076-147076-148076-148576-149076-150076-151076-151576-152076-153076-153576-154576-155076-155576-156076-156576-1570

made from

KE

Y

CU

TT

ER

S

ANY WIDTHCAN BE REDUCED TO YOUR SPECIFICATIONS.

1/4"DIAMETER

SOLID CARBIDE KEY CUTTERS

1/4

5/16

3/8

1/2

CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL


ORDER

EDP#

SHANK

DIA.

CUTTER DIAMETER

OVERALL

LENGTH WIDTH

NECK

DIAMETER

NECK

LENGTH

# OF

TEETH

7/8

3/4

1"

1-1/4"

+.015 / -.000

.0312

.0625

.0938

.1250

.1562

.1875

.2500

.0312

.0625

.0938

.1250

.1562

.1875

.2500

.3125

.3750

.0625

.1250

.1875

.2500

.0312

.0625

.0938

.1250

.1562

.1875

.2500

.3125

.3750

.0312

.0625

.0938

.1250

.1875

.2500

.3125

.3750

SOFT MATERIAL CUTTINGCARBIDE HEAD / STEEL SHANK KEY CUTTERS

5/8 1/4 1/2 6 2-3/4"

78-1660

78-1670

78-1680

78-1690

78-1700

78-1705

78-1720

78-1728

78-1730

78-1740

78-1750

78-1760

78-1765

78-1785

78-1800

78-1810

78-1813

78-181578-1825

78-1835

78-1846

78-1850

78-1855

78-1860

78-1862

78-1865

78-1875

78-1885

78-1890

78-1912

78-1915

78-1920

78-1925

78-1932

78-1940

78-1945

78-1950

1/4 1/2 6 2-3/4"

1/4 1/2 6 2-3/4"

1/4 1/2 6 2-3/4"

1/4 1/2 6 2-3/4"

.280

.280

.280

.280

.280

.280

.280

.280

.280

.280

.280

.280

.280

.280

.490

.490

.280

.280

.280

.280

.280

.280

.280

.280

.280

.490

.490

.490

.490

.280

.280

.280

.280

.490

.490

.490

.490

APPLICATION :


NECK LENGTH+.030 / - .000

HEAD DIA.+.015 / -.000

HEAD WIDTH+.0005 / - .000

EX

TR

A L

ON

G 2

-3/4

" S

HA

NK

KEY CUTTERS FORSOFTER MATERIALS


ALL CLEARANCE ANGLES, RAKE ANGLES AND DISH CLEARANCE SPECIFICALY ENGINEEREDAND DESIGNED FOR CUTTING SOFTER MATERIALS ALUMINUM, PLASTICS, ETC.

made from

KE

Y

CU

TT

ER

S


CARBIDE HEAD STEEL SHANK KEY CUTTERS

INTERNAL TOOL


TA

LO

G F

OU

RT

EE

N

72

SHANK

DIA.

SERIES 76

CUTTER DIAMETER

OVERALL

LENGTH

CUTTER

WIDTH

NECK

DIAMETER

NECK

LENGTH # OF

TEETH


ONE PIECE SOLID CONSTRUCTION

HEAD DIA.+.000 / -.005


HEAD WIDTH+.0005 / - .000

OVERALLLENGTH

5/32

+.000 / -.005

76-079576-080076-080276-080476-081076-081276-081576-082076-082576-090076-090276-090476-090676-091076-091276-091476-092076-092276-092476-092676-092876-093076-093276-095076-095276-095476-095576-095776-096076-096276-096376-096476-096576-105076-105276-105476-105576-105776-105976-106076-106276-106576-106776-106876-106976-107576-109576-110076-110576-111076-111576-112076-112576-113076-1135

.010

.015

.020

.025

.0312 (1/32)

.0394 (1 MM)

.0469 (3/64)

.0625 (1/16)

.010

.015

.020

.025

.030

.0312 (1/32)

.035

.0394 (1MM)

.0469 (3/64)

.050

.055

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.010

.015

.020

.025

.0312 (1/32)

.0394 (1MM)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.010

.015

.020

.030

.0312 (1/32)

.0394 (1MM)

.040

.0469 (3/64)

.050

.0625 (1/16)

.0781 (5/64)

.0787 (2MM)

.0934 (3/32)

.1250 (1/8)

.010

.015

.018

.020

.023

.025

.028

.030

.0312 (1/32)

ANY WIDTH REDUCED TO YOUR SPECIFICATIONS.


1/8

ITI CARBIDE

1/8"DIAMETER

3/16"DIAMETER

1/4"DIAMETER

5/16"DIAMETER

3/8"DIAMETER

1/2"DIAMETER

SPECIALS, CORNER RADIUS, STAGGER TOOTH AND LEFT HAND AVAILABLE.

76-0795-C76-0800-C76-0802-C76-0804-C76-0810-C76-0812-C76-0815-C76-0820-C76-0825-C76-0900-C76-0902-C76-0904-C76-0906-C76-0910-C76-0912-C76-0914-C76-0920-C76-0922-C76-0924-C76-0926-C76-0928-C76-0930-C76-0932-C76-0950-C76-0952-C76-0954-C76-0955-C76-0957-C76-0960-C76-0962-C76-0963-C76-0964-C76-0965-C76-1050-C76-1052-C76-1054-C76-1055-C76-1057-C76-1059-C76-1060-C76-1062-C76-1065-C76-1067-C76-1068-C76-1069-C76-1075-C76-1095-C76-1100-C76-1105-C76-1110-C76-1115-C76-1120-C76-1125-C76-1130-C76-1135-C

3/32

3/16

.046

.060

.078

.094

.125

ORDER

EDP#

ALTINCOATEDEDP#

made from

1/4

1/8

1/8

3/16

3/16

1/4

1/8

1/8

3/16

3/16

1/4

4

6

6

6

6

2"

2"

2-1/2

2-1/2

2-1/2

KE

Y

CU

TT

ER

S



CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL


1/4CONT.

.0350

.0380

.0394 (1MM)

.0400

.0469 (3/64)

.0500

.0600

.0625 (1/16)

.0781 (5/64)

.0787 (2MM)

.0937 (3/32)

.0150

.0200

.0312 (1/32)

.0394 (1MM)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0787 (2MM)

.0938 (3/32)

.1250 (1/8)

.1562 (5/32)

.010

.015

.020

.0312 (1/32)

.0394 (1MM)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0787 (2MM)

.0938 (3/32)

.1250 (1/8)

.1562 (5/32)

.1875 (3/16)

.015

.0312 (1/32)

.0394 (1MM)

.0468 (3/64)

.0625 (1/16)

.0781 (5/64)

.0787 (2 MM)

.0938 (3/32)

.1181 (3MM)

.1250 (1/8)

.1406 (9/64)

.1562 (5/32)

.1575 (4MM)

.1875 (3/16)

.1969 (5MM)

.2344 (15/64)

.2362 (6MM)

.2500 (1/4)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.1875 (3/16

.2500 (1/4)

5/16

3/8

1/2

76-114076-114576-114776-115076-115176-115376-115476-115576-115776-115876-115976-116076-116576-117076-117276-117576-118076-118276-118476-118576-119076-119576-119776-119876-119976-120076-120276-120576-121076-121276-121376-121576-122076-122576-123076-123276-123576-123776-124076-124576-124776-124876-125076-125276-125576-125776-126076-126276-126576-126776-126876-126976-127076-128076-129076-130076-131076-1320

SHANK

DIA.

CUTTER DIAMETER

OVERALL

LENGTH CUTTER

WIDTH

NECK

DIAMETER

NECK

LENGTH # OF

TEETH

ORDER

EDP#

ALTINCOATEDEDP#

76-1140-C76-1145-C76-1147-C76-1150-C76-1151-C76-1153-C76-1154-C76-1155-C76-1157-C76-1158-C76-1159-C76-1160-C76-1165-C76-1170-C76-1172-C76-1175-C76-1180-C76-1182-C76-1184-C76-1185-C76-1190-C76-1195-C76-1197-C76-1198-C76-1199-C76-1200-C76-1202-C76-1205-C76-1210-C76-1212-C76-1213-C76-1215-C76-1220-C76-1225-C76-1230-C76-1232-C76-1235-C76-1237-C76-1240-C76-1245-C76-1247-C76-1248-C76-1250-C76-1252-C76-1255-C76-1257-C76-1260-C76-1262-C76-1265-C76-1267-C76-1268-C76-1269-C76-1270-C76-1280-C76-1290-C76-1300-C76-1310-C76-1320-C

.125

.150

.200

.250

.300

1/4

5/16

3/8

3/8

1/2

6

8

8

10

10

2-1/2

2-1/2

2-1/2

3"

3-1/2

1/4

5/16

3/8

1/2

5/8

SERIES 76 ONE PIECE SOLID CONSTRUCTIONSOLID CARBIDE KEY CUTTERS


HEAD DIA.+.000 / -.005


HEAD WIDTH+.0005 / - .000

OVERALLLENGTH

73


5/8

KE

Y

CU

TT

ER

S




HP USER

Rectangle

HP USER

Text Box

missouricarbide.com

INTERNAL TOOL


TA

LO

G F

OU

RT

EE

N

3/16

.0156 (1/64)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.0156 (1/64)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.0156 (1/64)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.0156 (1/64)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.0156 (1/64)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.1875 (3/16)

1/4

5/16

1/2

83-100083-101083-102083-103083-104083-105083-106083-107083-108083-109083-110083-111083-112083-113083-114083-115083-116083-117083-118083-119083-120083-121083-122083-123083-124083-125083-126083-127083-128083-129083-130083-131083-132083-133083-134083-135083-136083-137083-1380

SHANK

DIA. CUTTER DIAMETER

OVERALL

LENGTH WIDTH NECK

DIAMETER

NECK

LENGTH # OF

TEETH

ORDER

EDP#

ALTINCOATEDEDP#

.093

.125

.156

.187

.250

.300

9/16

3/4

1"

1-1/8

1-1/2

1-5/8

6

6

8

8

10

10

2-1/2

2-1/2

2-1/2

3"

3"

3-1/2

3/16

1/4

5/16

3/8

1/2

5/8

SERIES 83

SOLID CARBIDELONG REACH KEY CUTTERS


3/8

83-1000-C83-1010-C83-1020-C83-1030-C83-1040-C83-1050-C83-1060-C83-1070-C83-1080-C83-1090-C83-1100-C83-1110-C83-1120-C83-1130-C83-1140-C83-1150-C83-1160-C83-1170-C83-1180-C83-1190-C83-1200-C83-1210-C83-1220-C83-1230-C83-1240-C83-1250-C83-1260-C83-1270-C83-1280-C83-1290-C83-1300-C83-1310-C83-1320-C83-1330-C83-1340-C83-1350-C83-1360-C83-1370-C83-1380-C

5/8

74

KE

Y

CU

TT

ER

S



NECK

DIAMETER

WIDTH

NECK

LENGTH

DIAMETER

+.000 / -.005

SHANK DIAMETER

LONG REACH KEY CUTTERS


HP USER

Rectangle

HP USER

Text Box

missouricarbide.com

CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL


SOLID CARBIDEDEEP SLOTTING KEY CUTTERS

.0156 (1/64)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.0156 (1/64)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.0156 (1/64)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.0156 (1/64)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.1875 (3/16)

1/4

5/16

1/2

57-100057-101057-102057-103057-104057-105057-106057-107057-108057-109057-110057-111057-112057-113057-114057-115057-116057-117057-118057-119057-120057-121057-122057-123057-124057-125057-126057-127057-128057-129057-130057-1310

SHANK

DIA. CUTTER DIAMETER

OVERALL

LENGTH

NECK

DIAMETER

NECK

LENGTH # OF

TEETH

ORDER

EDP#

ALTINCOATEDEDP#

.070 NECKDIAMETER

.090 DEPTH

OF CUT

.090 NECK DIAMETER

.110 DEPTH

OF CUT

.120 NECK DIAMETER

.125 DEPTH

OF CUT

.150 NECK DIAMETER

.175 DEPTH OF CUT

.180 NECK DIAMETER .220DEPTH

OFCUT

1/8

1/8

3/16

1/4

1/4

6

8

8

10

10

2-1/2

2-1/2

2-1/2

3"

3-1/2

1/4

5/16

3/8

1/2

5/8

3/8

57-1000-C57-1010-C57-1020-C57-1030-C57-1040-C57-1050-C57-1060-C57-1070-C57-1080-C57-1090-C57-1100-C57-1110-C57-1120-C57-1130-C57-1140-C57-1150-C57-1160-C57-1170-C57-1180-C57-1190-C57-1200-C57-1210-C57-1220-C57-1230-C57-1240-C57-1250-C57-1260-C57-1270-C57-1280-C57-1290-C57-1300-C57-1310-C


5/8

75

WIDTH

WIDTH

NECK LENGTH

NECK DIAMETER

DEPTH OF CUT

KE

Y

CU

TT

ER

S



DIAMETER

+.000 / -.005

SHANK DIAMETER

DEEP SLOTTING KEY CUTTERS

INTERNAL TOOL


TA

LO

G F

OU

RT

EE

N


HEAD DIA.+.015 / -.000 HEAD WIDTH

+.0005 / - .000

EX

TR

A L

ON

G 2

-3/4

" S

HA

NK

2-3/41/2 8

2-3/41/2 10

2-3/41/2 10

# 204

# 304

# 404

# 305

# 405

# 505

# 605

.0156 (1/64

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.0312 (1/32)

.0625 (1/16)

.1250 (1/8)

.0156 (1/64)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1094 (7/64)

.1250 (1/8)

.1562 (5/32)

.0312 (1/32)

.0625 (1/16)

.1250 (1/8)

.0156 (1/64)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1094 (7/64)

.1250 (1/8)

.1406 (9/64)

.1562 (5/32)

.1875 (3/16)

.2031 (13/64)

.2188 (7/32)

.2500 (1/4)

.2812 (9/32)

.0625 (1/16)

.1250 (1/8)

1/2

1/2

1/2 8

10

10 2-3/4

2-3/4

2-3/4

1/41/41/41/41/41/41/41/41/41/41/41/41/41/81/41/81/41/81/41/41/41/41/41/41/41/41/41/81/41/41/41/41/41/41/41/41/41/41/4

.200

.200

.200

.200

.200

.200

.200

.250

.250

.250

.250

.250

.250

.135

.250

.165

.250

.190

.250

.250

.250

.250

.280

.280

.280

.280

.280

.195

.280

.225

.280

.250

.250

.280

.280

.280

.280

.280

.280

ORDER EDP # WIDTH STD.#

SHANK

DIA.

SHANK

LENGTH

NECK

LENGTH

# OF

TEETH

NECK

DIA.

SERIES 78


3/8

7/16

1/2

9/16

5/8

11/16

CARBIDE HEAD KEY CUTTERS

HEADDIAMETER

ITI CARBIDE

CONTINUED ON NEXT PAGE.


78-109078-109578-110078-110578-110678-111078-111578-111678-111778-111878-111978-112078-112578-113078-113578-114078-114578-115078-115578-115678-115778-115878-115978-116078-116578-117078-117578-118078-118578-119078-119578-120078-120578-121078-121578-122078-122578-122678-1227

+.015 / -.000

made from


ALTINCOATEDEDP#

76

STANDARD TEETH

KE

Y

CU

TT

ER

S



HP USER

Rectangle

HP USER

Text Box

missouricarbide.com

CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL



SERIES 78

HEAD WIDTH+.0005 / - .000

HEAD DIA.+.015 / -.000


SHANK

DIA. SHANK

LENGTH

NECK

DIA.

NECK

LENGTH

# OF

TEETH

2-3/41/2 12

2-3/41/2 10

#507

#607

#707

#608

#708

#808

#1008

#1208

#807

78-122878-122978-123078-123578-124078-124578-125078-125578-126078-126578-127078-127578-128078-128578-129078-129578-130078-130578-131078-131178-131278-131378-131478-131578-132078-132578-133078-133578-134078-134578-134678-134878-135078-135278-135578-136078-136278-136578-137078-137578-138078-138578-1390

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1094 (7/64)

.1250 (1/8)

.1406 (9/64)

.1562 (5/32)

.1875 (3/16)

.2031 (13/64)

.2188 (7/32)

.2344 (15/64)

.2500 (1/4)

.2656 (17/64)

.2812 (9/32)

.3125 (5/16)

.3438 (11/32)

.3750 (3/8)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.1562 (5/32)

.1875 (3/16)

.2188 (7/32)

.2500 (1/4)

.3125 (5/16)

.3750 (3/8)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.1562 (5/32)

.1875 (3/16)

.2188 (7/32)

.2500 (1/4)

.2812 (9/32)

.3125 (5/16)

.3750 (3/8)

.280

.280

.280

.280

.280

.280

.230

.280

.250

.280

.280

.280

.280

.280

.490

.490

.490

.490

.490

.280

.280

.280

.280

.280

.250

.280

.280

.345

.490

.490

.280

.280

.280

.280

.280

.280

.280

.280

.340

.345

.490

.400

.400

1/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/4

ORDER EDP # STD.#

7/8

1"


HEADDIAMETER

ITICARBIDE

+.015 / -.000

made from

ALTINCOATEDEDP#

77

WIDTH

STANDARD TEETH

KE

Y

CU

TT

ER

S


3/4

#406

#506

#606

#806



1/2 12 2-3/4

EX

TR

A L

ON

G 2

-3/4

" S

HA

NK

101/2 2-1/2

1/2 12 2-1/2

1/2 12 2-1/2


INTERNAL TOOL


TA

LO

G F

OU

RT

EE

N


SERIES 78

WIDTH+.0005 / - .000

HEAD DIA.+.015 / -.000


EX

TR

A L

ON

G 2

-3/4

" S

HA

NK

exc

ept

wh

ere

no

ted

2-3/41/2 12

78-139278-139478-139578-140078-140578-141078-141278-141378-141578-141778-142078-142578-142778-143078-143578-144078-144578-145078-155578-155778-156078-156578-157078-157278-147578-148078-1485

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.1875 (3/16)

.2188 (7/32)

.2500 (1/4)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.1562 (5/32)

.1875 (3/16)

.2188 (7/32)

.2500 (1/4)

.3125 (5/16)

.3750 (3/8)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8

.1562 (5/32)

.1875 (3/16)

.2500 (1/4)

.3125 (5/16)

.3750 (3/8)

.280

.280

.280

.280

.490

.490

.280

.280

.280

.280

.280

.280

.280

.320

.380

.379

.437

.430

.280

.280

.280

.280

.280

.490

.400

.470

.470

1/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/4

1-1/4

1/2 14

2"

solid carbide

78-1392-C78-1394-C78-1395-C78-1400-C78-1405-C78-1410-C78-1412-C78-1413-C78-1415-C78-1417-C78-1420-C78-1425-C78-1427-C78-1430-C78-1435-C78-1440-C78-1445-C78-1450-C78-1555-C78-1557-C78-1560-C78-1565-C78-1570-C78-1572-C78-1475-C78-1480-C78-1485-C

78STANDARD TEETH

KE

Y

CU

TT

ER

S


SHANK

DIA.

SHANK

LENGTH

NECK

DIA.

NECK

LENGTH

# OF

TEETH

ORDER EDP # STD.#


HEADDIAMETER

ITICARBIDE

+.015 / -.000

made from

ALTINCOATEDEDP#

WIDTH


1-1/8

#710#810

#610

#1010

#1210

#811#1011#1211

2-3/4

1-3/81/2 14 2-3/4

141/2


1/2 12 2-1/2

2-1/2141/2

1/2 14 2-1/2

CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL



SERIES 78

WIDTH+.0005 / - .000

HEAD DIA.+.015 / -.000


EX

TR

A L

ON

G 2

-3/4

" S

HA

NK

exc

ept

wh

ere

no

ted

2-3/41/2

2-1/2

1/2 18

16

78-145278-145378-145578-145778-146078-146578-147078-149078-149578-150078-150578-150778-150878-151078-151278-151578-151778-151978-152078-152278-152378-152578-152778-1530

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.1875 (3/16)

.2500 (1/4)

.3125 (5/16)

.3750 (3/8)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.1562 (5/32)

.1875 (3/16)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.1562 (5/32)

.1875 (3/16)

.280

.280

.280

.280

.280

.280

.490

.430

.460

.490

.490

.490

.490

.490

.490

.490

.490

.490

.490

.490

.490

.490

.490

.490

1/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/4

1-3/4 1/2 16

2"

solid carbide

78-1452-C78-1453-C78-1455-C78-1457-C78-1460-C78-1465-C78-1470-C78-1490-C78-1495-C78-1500-C78-1505-C78-1507-C78-1508-C78-1510-C78-1512-C78-1515-C78-1517-C78-1519-C78-1520-C78-1522-C78-1523-C78-1525-C78-1527-C78-1530-C

STANDARD TEETH

2"

SHANK

DIA. SHANK

LENGTH

NECK

DIA.

NECK

LENGTH # OF

TEETH

ORDER EDP # STD.#

HEADDIAMETER+.015 / -.000

made from

ALTINCOATEDEDP#

WIDTH

1-1/2

2-1/2

161/2


#812#1012

#1212

KE

Y

CU

TT

ER

S


79

ITICARBIDE

1/2 16 2-1/2


INTERNAL TOOL

ITI Carbide Cutting ToolsCATALOG FOURTEEN

80

NECK LENGTH6.5MM (.250)

HEAD DIA.+0.4 / -.000 MM(+.015 / -.000)

WIDTH+.012MM - .000 MM(+.0005 - .000)

EXTRA L

ONG 70M

M (2-3/4"

) SHANK

8

10

10

1.0 (.0394)2.0 (.0787)3.0 (.1181)1.0 (.0394)2.0 (.0787)3.0 (.1181)1.0 (.0394)2.0 (.0787)3.0 (.1181)4.0 (.1575)1.0 (.0394)2.0 (.0787)3.0 (.1181)4.0 (.1575)1.0 (.0394)2.0 (.0787)3.0 (.1181)4.0 (.1575)5.0 (.1969)1.0 (.0394)2.0 (.0787)3.0 (.1181)4.0 (.1575)5.0 (.1969)1.0 (.0394)2.0 (.0787)3.0 (.1181)4.0 (.1575)5.0 (.1969)1.0 (.0394)2.0 (.0787)3.0 (.1181)4.0 (.1575)5.0 (.1969)1.0 (.0394)2.0 (.0787)3.0 (.1181)4.0 (.1575)5.0 (.1969)1.0 (.0394)2.0 (.0787)3.0 (.1181)4.0 (.15755.0 (.1969)

8

10

ORDER EDP #

WIDTH # OF

TEETH

SERIES 79

METRICCARBIDE HEAD STEEL SHANK KEY CUTTERS

10MM

12MM

14MM

16MM

18MM

24MM

20MM


SPECIALS, CORNER RADIUS, STAGGER TOOTH AND LEFT HAND ARE AVAILABLE ON REQUEST.

ANY WIDTH CAN BE REDUCED TO YOUR SPECIFICATIONS.

HEADDIAMETER

ITI CARBIDE


79-180079-180579-181079-181579-182079-182579-183079-183579-184079-184579-185079-185579-186079-186579-187079-187579-188079-188579-189079-189579-190079-190579-191079-191579-192079-192579-193079-193579-194079-194579-195079-195579-196079-196579-197079-197579-198079-198579-199079-199579-200079-200579-201079-2015

30MM

32MM

38MM

(.394)

(.472)

(.551)

(.629)

(.708)

(.787)

(.944)

(1.182)

(1.260)

(1.497)

10

12

12

14

16

ALL SHANK DIAMETERS ARE 12.7 MM (.500)

NECK DIA

5 MM (.196)

5 MM (.196)

6 MM (.236)

7 MM (.275)

7 MM (.275)

7 MM (.275)

7 MM (.275)

7 MM (.275)

7 MM (.275)

7 MM (.275)

made from


ALTINCOATED EDP #

STANDARD TEETH

KEY CUTTERS

16 (.490)


HP USER

Rectangle

HP USER

Text Box

missouricarbide.com

CATALOG FOURTEEN

INTERNAL TOOL


NECK LENGTH .250

HEAD DIA.+.015 / -.000

WIDTH+.0005 - .000

EXTRA L

ONG 70M

M (2-3/4"

) SHANK

14

22

.0312 (1/32)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.0312 (1/32)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.0312 (1/32)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.1875 (3/16)

.2500 (1/4)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.1875 (3/16)

.0312 (1/32)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.1875 (3/16)

.2500 (1/4)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.1875 (3/16)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.1562 (5/32)

.1875 (3/16)

.2500 (1/4)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.1562 (5/32)

.1875 (3/16)

16

20

ORDER EDP #

WIDTH # OF

TEETH

SERIES 107

FINE TOOTHCARBIDE HEAD STEEL SHANK KEY CUTTERS

3/4

7/8

1"

1-1/8

1-1/4

1-1/2


HEADDIAMETER

ITI CARBIDE

107-1000107-1010107-1020107-1030107-1040107-1050107-1060107-1070107-1080107-1090107-1100107-1110107-1120107-1130107-1140107-1150107-1160107-1170107-1180107-1190107-1200107-1210107-1220107-1230107-1240107-1250107-1260107-1270107-1280107-1290107-1300107-1310107-1320107-1330107-1340107-1350107-1360107-1370107-1380

24

28

30

ALL SHANK DIAMETERS 1/2"

NECK DIA

.250

.280

made from

ALTINCOATED EDP #

5/8

1/2

.280

.280

.280

.280

30

.280

.490

36.280

36.490


81

FINE TEETH


KEY CUTTERS


DESIGNED TO BE USED ON HARDERMATERIALS AND WHEN CUTTING INTERRUPTED CUTS

INTERNAL TOOL


SHANK LENGTH 2-3/4"

HEAD DIA.(+.015 / -.000)

WIDTH(+.0005 - .000)

24

.0312 (1/32)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.1875 (3/16

.2500 (1/4)

.0312 (1/32)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.1875 (3/16)

.2500 (1/4)

.0312 (1/32)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.1875 (3/16)

.2500 (1/4)

.0312 (1/32)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.1875 (3/16)

.2500 (1/4)

.0312 (1/32)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.1875 (3/16)

.2500 (1/4)

28

ORDER EDP #

WIDTH # OF

TEETH

SERIES 23

LARGE DIAMETERCARBIDE HEAD STEEL SHANK KEY CUTTERS

2-1/2

2-3/4

3"


HEADDIAMETER

ITI CARBIDE

23-100023-101023-102023-103023-104023-105023-106023-107023-108023-109023-110023-111023-112023-113023-114023-115023-116023-117023-118023-119023-120023-121023-122023-123023-124023-125023-126023-127023-128023-1290

30

ALL SHANK DIAMETERS ARE 3/4"

made from

ALTINCOATED EDP #

2-1/4

2"



28

30

DEPTH OF CUT

DEPTH

OF CUT

.550

.600

.650

.550

.800

82

KEY CUTTERS


CATALOG FOURTEEN

INTERNAL TOOL


ORDER

EDP#

SHANK

DIA.OVERALL

LENGTH

1/4 2-1/2

WIDTH NECK

DIAMETER

NECK

LENGTH

1/4

# OF

TEETH

6

5/16 2-1/25/16 8

3/8 2-1/23/8 8

1/2 3"1/2 10

3/16 6 2-1/277-190077-191077-192077-193077-194077-195077-196077-197077-1980

.018

.029

.039

.046

.056

.068

.086

.103

.120

RETAINING RING CARBIDE KEY CUTTERS

3/16

HEAD

DIAMETER


LONG SHANK CARBIDE HEAD KEY CUTTERSSERIES 74 ITI CARBIDE

ORDER

EDP#

SHANK

DIA.

OVERALL

LENGTH

1/4 4"

WIDTH NECK

DIAMETER

NECK

LENGTH

1/4

# OF

TEETH

6

5/16 4"5/16 8

3/8 4"3/8 8

1/2 6"1/2 10

3/16 6 4"74-010074-010574-011074-011574-012074-012574-013074-013574-014074-0145

.0469

.0938

.0625

.1250

.0625

.1250

.0625

.1250

.0625

.1250

LONG SHANK SOLID CARBIDE KEY CUTTERS

3/16

HEAD

DIAMETER


ORDER

EDP#

SHANK

DIA.

OVERALL

LENGTH

3/4 6"

WIDTH NECK

DIAMETER

NECK

LENGTH

# OF

TEETH

10

1"

6"12

1-1/4

6"12

7/8

6"1/2 14

10 6"74-020074-020574-021074-021574-022074-022574-023074-023574-024074-0245

.0625

.1250

.0625

.1250

.0625

.1250

.0625

.1250

.0625

.1250

1/16

HEAD

DIAMETER

1/2

1/2

1/2

1/2

SPECIAL WIDTHS, CORNER RADIUS, STAGGER TOOTH AND LEFT HAND ARE AVAILABLE ON REQUEST.

APPLICATION : ALL CLEARANCE ANGLES, RAKE ANGLES AND DISH CLEARANCE'S ARESPECIFICALLY ENGINEERED AND DESIGNED FOR CUTTING RETAINING RING GROOVES

HEAD DIA.+.000 / -.005


WIDTH+.0005 / - .000

OVERALLLENGTH

ORDER

EDP#

SERIES 90

60°

INCLUDED

ANGLE

# OF

TEETH WIDTH

OF CUT

90°

SINGLE ANGLE CUTTERS

MAJOR DIA.+.015 / -.000

NECK LENGTH 1/4"

60° OR 90°INCLUDED ANGLE

WIDTH OF CUT+.005 / -.000

90-1100

90-1105

90-1110

90-1115

90-1120

90-1125

SA-500-60

SA-625-60

SA-750-60

SA-500-90

SA-625-90

SA-750-90

1/2

5/8

3/4

1/2

5/8

3/4

.125

.187

.250

.125

.187

.250

4

6

6

4

6

6

MAJOR

DIA.

TOOL

IDENTIFICATION

ITI CARBIDE

2-3/4" EXTRALONG SHANK

NECK DIAMETER 1/4"

MINOR DIA.+.015 / -.000

MINOR

DIA.

.356

.408

.461

.250

.250

.250

CARBIDE HEAD ON HARDENED STEEL SHANK

.094

.125

.125

.125

.150

.200

.200

.250

.250

3/163/161/41/45/163/83/83/83/8

.094

.094

.125

.125

.150

.150

.200

.200

.250

.250

1/41/43/83/81/21/25/85/83/4

3/4

.280

.280

.250

.250

.280

.280

.280

.280

.280

.280

1/41/41/41/41/41/41/41/41/41/4

made from

made from

made from

made from

ALTINCOATED EDP #

77-1900-C77-1910-C77-1920-C77-1930-C77-1940-C77-1950-C77-1960-C77-1970-C77-1980-C

83

KEY CUTTERS


ALTINCOATED EDP #

ALTINCOATED EDP #

74-0100-C74-0105-C74-0110-C74-0115-C74-0120-C74-0125-C74-0130-C74-0135-C74-0140-C74-0145-C

74-0200-C74-0205-C74-0210-C74-0215-C74-0220-C74-0225-C74-0230-C74-0235-C74-0240-C74-0245-C

INTERNAL TOOL


SERIES 78

CARBIDE KEY CUTTERS

CARBIDE HEAD 3/8" STEEL SHANK KEY CUTTERSSHANK

DIA.

SHANK

LENGTH NECK

DIA.

NECK

LENGTH

# OF

TEETH

3/8 2-3/4

3/8

10

.0312

.0469

.0625

.0781

.0938

.1250

.1562

.0312

.0469

.0625

.0781

.0938

.1250

.1562

.1875

.0312

.0469

.0625

.0781

.0938

.1250

.1562

.1875

.0312

.0469

.0625

.0781

.0938

.1250

ORDER EDP # WIDTH

1/2

78-087078-087578-088078-088578-089078-089578-089778-090078-090278-090578-090778-091078-091578-091778-091878-092078-092278-092578-092778-093078-093578-093778-093978-094578-095078-095578-096078-096578-0970

3/8

5/8

3/4

2-3/4

2-3/4

10

10

DESIGNED TO BE USED IN SMALLMILLS OR AS LIVE TOOLING

APPLICATION :

HEADDIAMETER

ITICARBIDE

SERIES 76

SOLID CARBIDE 1/4" SHANK KEY CUTTERSSHANK

DIA.

SHANK

LENGTH NECK

DIA.

NECK

LENGTH

# OF

TEETH

10

SC-375-031

SC-375-063

SC-375-094

SC-375-125

SC-500-031

SC-500-063

SC-500-094

SC-500-125

SC-625-031

SC-625-063

SC-625-094

SC-625-125

.0312

.0625

.0938

.1250

.0312

.0625

.0938

.1250

.0312

.0625

.0938

.1250

.200

.200

.200

.200

.240

.240

.240

.240

.240

.240

.240

.240

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

ORDER EDP #

WIDTH

3/876-9000

76-9010

76-9015

76-9020

76-9025

76-9030

76-9035

76-9040

76-9045

76-9050

76-9055

76-9060

1/4

1/2

5/8

2-1/2"8

10

DESIGNED TO BE USED IN SMALLMILLS OR AS LIVE TOOLING

APPLICATION :

HEADDIAMETER

ITI CARBIDE

TOOL

IDENTIFICATION

1/4

1/4

SPECIAL WIDTHS, CORNER RADIUS, STAGGER TOOTH AND LEFT HAND ARE AVAILABLE ON REQUEST.

+.015 / -.000

made from

made from

78-0870-C78-0875-C78-0880-C78-0885-C78-0890-C78-0895-C78-0897-C78-0900-C78-0902-C78-0905-C78-0907-C78-0910-C78-0915-C78-0917-C78-0918-C78-0920-C78-0922-C78-0925-C78-0927-C78-0930-C78-0935-C78-0937-C78-0939-C78-0945-C78-0950-C78-0955-C78-0960-C78-0965-C78-0970-C

1" 3/8 12 2-3/4

.250 1/4

.250 1/4

.250 1/4

.250 1/4

ALTINCOATED EDP #

84

SPECIAL WIDTHS ARE AVAILABLE ON REQUEST.

KEY CUTTERS

+.010 / -.000

2-1/2"

2-1/2"


CATALOG FOURTEEN

INTERNAL TOOL


FULL RADIUS KEY CUTTERS

85

ORDER

EDP#

SHANK

DIA.

SERIES 80

HEAD

DIA.

SHANK

LENGTH

2-3/4

NECK

DIA.

NECK

LENGTH

.250 1/4 1/2

# OF

TEETH

6

1" 2-3/4.280 1/4 1/2 8

2-3/4.280 1/4 1/2 6

2-3/4.280 1/4 1/2 8

FULL RADIUS KEY CUTTERS

WIDTH+.0005 / -.000

HEAD DIA +.015 / -.000

NECK LENGTH +.030 / -.000

RADIUS CARBIDE KEY CUTTERS

80-109080-109580-110080-110480-110580-111080-111280-111480-111580-111780-112080-112580-112780-112880-113080-113280-113580-114080-114280-114480-114580-115080-115580-116080-116580-117080-118080-118580-1190

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

ITI CARBIDE



THEIR SPECIAL IS OUR STANDARD


made from

1/2

5/8

3/4

1-1/4 1/4.280 1/2 10 2-3/4

ORDER

EDP#

SHANK

DIA. HEAD

DIA.

OVERAL

LENGTH

2-1/2

WIDTH NECK

DIA. NECK

LENGTH

.094 3/16 3/16

# OF

TEETH

4

3/8 2-1/2.200 3/8 3/8 6

2-1/2.125 1/4 1/4 5

2-1/2.150 5/16 5/16 6

80-500080-501080-502080-503080-504080-505080-506080-507080-508080-509080-600080-601080-602080-603080-604080-605080-606080-607080-608080-609080-700080-7010

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0781 (5/64)

.0938 (3/32)

.1250 (1/8)

.0312 (1/32)

.0469 (3/64)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)


3/16

1/4

5/16

1/2 3/8.250 1/2 6 3"

SOLID CARBIDE

RADIUS

SIZE

.0156

.0234

.0312

.0156

.0234

.0312

.0390

.0469

.0156

.0234

.0312

.0390

.0469

.0625

.0156

.0234

.0312

.0469

.0625

.0312

.0469

.0625

RADIUS

SIZE

.0156

.0234

.0312

.0395

.0469

.0625

.0156

.0234

.0312

.0395

.0469

.0625

.0156

.0234

.0312

.0395

.0469

.0625

.0156

.0234

.0312

.0469

.0625

.0312

.0469

.0625

.0312

.0469

.0625

WIDTH

KEY CUTTERS

HEAD DIA +.000 / -.005

WIDTH+.0005 / -.000


NECK DIA+.000 / -.005

1-1/2 .280 1/4 1/2 10 2-3/4

NEW SIZES!80-1090-C80-1095-C80-1100-C80-1104-C80-1105-C80-1110-C80-1112-C80-1114-C80-1115-C80-1117-C80-1120-C80-1125-C80-1127-C80-1128-C80-1130-C80-1132-C80-1135-C80-1140-C80-1142-C80-1144-C80-1145-C80-1150-C80-1155-C80-1160-C80-1165-C80-1170-C80-1180-C80-1185-C80-1190-C

ALTIN COATED EDP #

80-5000-C80-5010-C80-5020-C80-5030-C80-5040-C80-5050-C80-5060-C80-5070-C80-5080-C80-5090-C80-6000-C80-6010-C80-6020-C80-6030-C80-6040-C80-6050-C80-6060-C80-6070-C80-6080-C80-6090-C80-7000-C80-7010-C

ALTIN COATED EDP #

INTERNAL TOOL



RADIUS

SIZE

SHANK

DIA. HEAD

DIA.

OVERALL

LENGTH WIDTH NECK

DIA.

NECK

LENGTH

# OF

TEETH

3/8

101-1000101-1020101-1030101-1040101-1050101-1060101-1070101-1080101-1090101-1100101-1110101-1120101-1130101-1140101-1150101-1160101-1170101-1180101-1190101-1200101-1210101-1220101-1230101-1240101-1250101-1260101-1270101-1280101-1290101-1300101-1310101-1320101-1330101-1340101-1350101-1360101-1370101-1380101-1390101-1400101-1410101-1420101-1430101-1440

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.250 (1/4)


1/4

5/16

1/2

CORNER RADIUS KEY CUTTERSSOLID CARBIDE

.005

.010

.015

.005

.010

.015

.005

.010

.015

.030

.005

.010

.015

.005

.010

.015

.005

.010

.015

.030

.005

.010

.015

.005

.010

.015

.005

.010

.015

.030

.005

.010

.015

.005

.010

.015

.005

.010

.015

.030

.005

.010

.015

.030

ORDER

EDP#


ALTINCOATED EDP #

.125

.150

.200

.250

1/4

5/16

3/8

3/8

1/4

5/16

3/8

1/2

6

8

8

10

2-1/2

2-1/2

2-1/2

3"

86

KEY CUTTERS


NECK

LENGTH

NECK

DIA.

WIDTH

CORNER

RAD'S

HEAD

DIA

+.000/-.005

CORNER RADIUS KEY CUTTERS


HP USER

Rectangle

HP USER

Text Box

missouricarbide.com

CATALOG FOURTEEN

INTERNAL TOOL


RADIUS

SIZE

SHANK

DIA. HEAD

DIA.

SHANK

LENGTH WIDTH NECK

DIA.

NECK

LENGTH

# OF

TEETH

1"

102-1000102-1020102-1030102-1040102-1050102-1060102-1070102-1080102-1090102-1100102-1110102-1120102-1130102-1140102-1150102-1160102-1170102-1180102-1190102-1200102-1210102-1220102-1230102-1240102-1250102-1260102-1270102-1280102-1290102-1300102-1310102-1320102-1330102-1340102-1350102-1360102-1370102-1380102-1390102-1400102-1410102-1420102-1430102-1440

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.250 (1/4)

5/8

3/4

1-1/4

CORNER RADIUS KEY CUTTERSCARBIDE HEAD STEEL SHANK

.005

.010

.015

.005

.010

.015

.005

.010

.015

.030

.005

.010

.015

.005

.010

.015

.005

.010

.015

.030

.005

.010

.015

.005

.010

.015

.005

.010

.015

.030

.005

.010

.015

.005

.010

.015

.005

.010

.015

.030

.005

.010

.015

.030

ORDER

EDP#


ALTINCOATED EDP #

.280

.280

.280

.280

.380

1/4

1/4

1/4

1/4

1/4

1/2

1/2

1/2

1/2

1/2

10

10

12

14

14

2-3/4

2-3/4

2-3/4

2-3/4

2-1/2


87

KEY CUTTERS


NECK

DIA. NECK

LENGTH

WIDTH HEAD

DIA

+.015/-.000

CORNER

RAD'S

CORNER RADIUS KEY CUTTERS


INTERNAL TOOL


2-3/4

2-3/4

2-3/4

2-3/4

2-3/4

2-3/4

2-3/4

NECK LENGTH

HEAD DIA.+.015 / -.000

WIDTH+.0005 - .000

SHANK LENGTH

8

8

8

10

10

10

12

.0625 (1/16)

.0938 (3/32)

.1250 (1/8)

.0938 (3/32)

.1250 (1/8)

.1562 (5/32)

.1875 (3/16)

.2500 (1/4)

.1250 (1/8)

.1562 (5/32)

.1875 (3/16)

.2500 (1/4)

.3125 (5/16)

.1250 (1/8)

.1562 (5/32)

.1875 (3/16)

.2188 (7/32)

.2500 (1/4)

.3125 (5/16)

.3750 (3/8)

.1250 (1/8)

.1875 (3/16)

.2188 (7/32)

.2500 (1/4)

.3125 (5/16)

.3750 (3/8)

.1250 (1/8)

.1875 (3/16)

.2500 (1/4)

.3125 (5/16)

.3750 (3/8)

.1250 (1/8)

.1875 (3/16)

.2188 (7/32)

.2500 (1/4)

.3125 (5/16)

.3750 (3/8)

.1250 (1/8)

.1875 (3/16)

.2500 (1/4)

.3125 (5/16)

.3750 (3/8)

.2500 (1/4)

.3125 (5/16)

.3750 (3/8)

ORDER EDP #

WIDTH # OF

TEETH

STAGGERED TOOTHCARBIDE HEAD STEEL SHANK KEY CUTTERS

3/4

7/8

1"

1-1/8

1-1/4

1-1/2

HEADDIAMETER

103-1000103-1010103-1020103-1030103-1040103-1050103-1060103-1070103-1080103-1090103-1100103-1110103-1120103-1130103-1140103-1150103-1160103-1170103-1180103-1190103-1200103-1210103-1220103-1230103-1240103-1250103-1260103-1270103-1280103-1290103-1300103-1310103-1320103-1330103-1340103-1350103-1360103-1370103-1380103-1390103-1400103-1410103-1420103-1430103-1440

ALL SHANK DIAMETERS 1/2"

NECK DIA

ALTINCOATED EDP #

5/8

1/2103-1000-C103-1010-C103-1020-C103-1030-C103-1040-C103-1050-C103-1060-C103-1070-C103-1080-C103-1090-C103-1100-C103-1110-C103-1120-C103-1130-C103-1140-C103-1150-C103-1160-C103-1170-C103-1180-C103-1190-C103-1200-C103-1210-C103-1220-C103-1230-C103-1240-C103-1250-C103-1260-C103-1270-C103-1280-C103-1290-C103-1300-C103-1310-C103-1320-C103-1330-C103-1340-C103-1350-C103-1360-C103-1370-C103-1380-C103-1390-C103-1400-C103-1410-C103-1420-C103-1430-C103-1430-C

1-3/8

SERIES 103

STD #

#204#304#404#305#405#505#605

#406#506#606#806

#507#607#707#807

#608#708#808#1008#1208

#609

#610#710#810#1010#1210

#811#1011#1211#812#1012#1212

.135

.165

.190

.195

.225

.250

.250

.280

.230

.250

.280

.280

.490

.280

.250

.280

.280

.345

.490

.490

.280

.280

.340

.345

.400

.400

.280

.280

.490

.490

.490

.280

.320

.380

.379

.437

.430

.280

.400

.400

.470

.470

.430

.460

.490

NECK LENGTH

1/81/81/81/81/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/4

SHANK

LENGTH


88

KEY CUTTERS



8 2-1/2

2-1/2

10

10

2-1/2

2-1/210

12

2-1/2

2"SOLID

CARBIDE

12

12

12

2-3/4

2-1/2

14 2"SOLIDCARBIDE

STAGGERED TOOTH KEY CUTTERS

CATALOG FOURTEEN

INTERNAL TOOL


WIDTH

NECK DIAMETER

FULL RADIU

S ?

Quote in

quanite

s of ?

THE M

ORE Y

OU B

UY

THE C

HEAPER T

HEY G

ET

SHANK DIA

METER

SHANK LENGTH

If not su

re leave

blank

MAJO

R D

IAMETER

INTERNAL TOOL

DRAWN BY:

REV:

TOOL NUMBER:

DATE:

TOLE

RANCE U

NLE

SS

OTHERWISE SPECIFIED

.X = +/- 1/32

.XX = +/- .010

.XXX = +/- .002

.XXXX = /- .0005

ANGLES +

/- 0.15°

REVISIONS:

YOUR COMPANY NAME:

CONTACT :

PHONE:

FAX:

YOUR DISTRIBUTOR:

QUANITY:

NECK LENGTH

CORNER RADIUS

OUTSID

E - SIZE?

CORNER RADIUS

INSID

E - SIZE?

INTERNAL

Sim

ply m

ake

a copy

fill in th

e in

form

atio

n below and fa

x or email to

us. fax # 909-392-2627

we will quote as so

on as poss

ible. IN

FO@

internalto

ol.c

om

Any dim

ension your n

ot sure of leave

blank we will quote standard.

SPECIAL KEY CUTTERS

KEY CUTTERS




HP USER

Rectangle

HP USER

Text Box

missouricarbide.com

INTERNAL TOOL


ORDER

EDP# TOOL

IDENTIFICATION

SHANK

DIA.

SERIES 84

HEAD

DIA.

SHANK

LENGTH

1/2 2-3/4

RADIUS

SIZE

NECK

DIA. NECK

LENGTH

.280 1/4 1/2

# OF

TEETH

6

3/4

2-3/4.280 1/4 1/2 65/8

2-3/4.280 1/4 1/2 8

HEAD

WIDTH

ORDER

EDP#

SHANK

DIA.

SERIES 82

HEAD

DIA.SHANK

LENGTH

1/2 2-3/4

RADIUS

SIZE

NECK

DIA.

NECK

LENGTH

.280 1/4 1/2

# OF

TEETH

6

3/4

2-3/4.280 1/4 1/2 65/8

2-3/4.380 1/4 1/2 8

HEAD

WIDTH


DOUBLE CONCAVE RADIUS CUTTERS

CONCAVE RADIUS KEY CUTTERS

WIDTH+.0005 / -.000


HEAD DIA +.015 / -.000

WIDTH+.0005 / -.000


84-1100

84-1105

84-1110

84-1115

84-1120

84-1125

84-1130

84-1135

84-1140

DR-500-010

DR-500-015

DR-500-020

DR-625-031

DR-625-046

DR-625-062

DR-750-080

DR-750-094

DR-750-125

.010

.015

.020

.031

.046

.062

.080

.093

.125

.115

.125

.135

.155

.185

.215

.255

.280

.345

82-1100

82-1120

82-1130

82-1140

82-1150

CO-500-031

CO-625-046

CO-625-062

CO-750-094

CO-750-125

.031

.046

.062

.093

.125

3/16

7/32

1/4

5/16

3/8

TOOL

IDENTIFICATION

ITI CARBIDE

ITI CARBIDE


HEAD DIA +.015 / -.000




made from

made from


5 FLUTE

DEPTH OF CUT

OVERALL LENGTH 3-3/4"

EDPNUMBER

81-105081-106081-107081-108081-109081-1100

.044

.088

.134

.182

.289

.500

ANGLEper side

5°

5°10°15°20°30°45° 20°

ITI CARBIDE

SPECIAL ANGLES AVAILABLE ON REQUEST

SHANKDIAMETER 3/4"

10°

30°

45°

15°

HEADDIAMETER 1-1/4"

DEPTH OF CUT

1/4" TIPDIAMETER

SERIES 81

ANGLERSCARBIDE HEAD ON HARDENED STEEL SHANK

APPLICATION :MILLING ANGLES

RIGHT HANDCENTER CUTTING

made from

90

CATALOG FOURTEEN

INTERNAL TOOL


.070

.093

.103

.125

.139

.187

.210

.250

.275

.375

24° O-RING DOVETAIL CUTTERS SHANK DIA.x LGTH

BOTTOM RADIUS

EDPNUMBER

O-RING SIZE

DEPTH OF CUT

51-800051-800551-801051-801551-802051-802551-803051-803551-804051-8045

TOP RADIUS

.062

.086

.094

.130

.125

.190

.189

.250

.244

.338

.051

.075

.082

.102

.112

.154

.172

.212

.232

.317

.015

.015

.015

.031

.031

.031

.031

.062

.062

.094

.005

.010

.010

.010

.010

.015

.015

.015

.015

.020

3/16 x 2.53/16 x 2.53/16 x 2.51/4 x 2.51/4 x 2.55/16 x 2.55/16 x 2.53/8 x 2.53/8 x 2.51/2 x 3.0

MINOR

DIA.

DEPTH

OF CUT

BOTTOM

RADIUS

MAJOR DIA.

MAJOR DIA.

.086

.126

.140

.177

.180

.279

.293

.356

.369

.497

SERIES 51 APPLICATION :ITI CARBIDE

SHANK DIA.

USED TO CUT-MILL 24° O-RING DOVETAILS.THEY CUT WITH BOTH TOP & BOTTOM RADIUS.

made from

MINOR DIA.

91OVER 6000 TOOLS NOW AVAILABLE

4

4

4

6

.250 (1/4)

.375 (3/8)

.500 (1/2)

.625 (5/8)

.750 (3/4)

.250 (1/4)

.375 (3/8)

.500 (1/2)

.625 (5/8)

.750 (3/4)

.250 (1/4)

.375 (3/8)

.500 (1/2)

.625 (5/8)

.750 (3/4)

.250 (1/4)

.375 (3/8)

.500 (1/2)

.625 (5/8)

.750 (3/4)1.00 (1")

ORDER EDP #

WIDTH # OF

TEETH

PUSH-PULLSOLID CARBIDE CUTTERS

3/4

1"

HEADDIAMETER

106-1000106-1020106-1040106-1060106-1080106-1100106-1120106-1140106-1160106-1180106-1200106-1220106-1240106-1260106-1280106-1300106-1320106-1340106-1360106-1380106-1400

NECK DIA

ALTINCOATED EDP #

5/8

1/2

106-1000-C106-1020-C106-1040-C106-1060-C106-1080-C106-1100-C106-1120-C106-1140-C106-1160-C106-1180-C106-1200-C106-1220-C106-1240-C106-1260-C106-1280-C106-1300-C106-1320-C106-1340-C106-1360-C106-1380-C106-1400-C

SERIES 106

.250

.312

.375

.500

NECK LENGTH

1/2

1/2

3/4

3/4

OVERALL

LENGTH

4"

4"

4"

6"

ITI CARBIDEmade from APPLICATION :CUTS ONBOTH SIDES AND DIAMETER

WIDTH+.005 / -.000


NECK DIAMETER+.000 / -.005

HEAD DIAMETER+.000 / -.005

BOTH SIDES ANDDIAMETER CUT

HEAD AND SHANK ARE SAMEDIAMETER

PUSH-PULL CARBIDE CUTTERS

NEED A SPECIAL SIZE ? MAKE A COPY, FILL IN THE INFORMATION, AND FAX IT TO US FOR A QUOTE .

24°

TOP

RADIUS

TURNING STYLE O'RING TOOLS ARE ON PAGE 27

BOTTOM RADIUS

EDPNUMBER

O-RING SIZE

DEPTH OF CUT

TOP RADIUS

MAJOR DIA.

MINOR DIA.

1.782.623.535.336.99

1.402.102.854.355.85

51-200051-201051-202051-203051-2040

SHANK DIA.x LGTH

24° O-RING DOVETAIL CUTTERSPARKER-HANNIFIN STYLE*CUTTING DIMENSIONS ARE METRIC*

1.252.052.804.555.85

3/16 x 2.53/16 x 2.51/4 x 2.55/16 x 2.53/8 x 2.5

1.793.224.287.339.04

.211

.203

.254

.254

.254

.508

.508

.787

.7871.60

INTERNAL TOOL


TA

LO

G F

OU

RT

EE

N

92

DOVETAIL CUTTERS

SERIES 86

30°

ANGLE

PER SIDE

45°

DOVETAIL CUTTERS WITH STEEL SHANK

EXTRA LONG 2-3/4" SHANK

HEAD DIA +.015 / -.000

86-120086-120586-121086-121586-122086-1225

3/81/23/43/81/23/4

.160

.210

.350

.125

.185

.250

.187

.250

.312

.125

.156

.250

565445

1/21/21/21/21/21/2

3-1/83-1/83-1/83-1/83-1/83-1/8

1/41/41/41/41/41/4

ORDER

EDP#

SHANK

DIA.

HEAD

DIAMETER

O.A.L.

LENGTH

NECK

DIAMETER

NECK

LENGTH

# OF

TEETHWIDTH

OF CUT

ITI CARBIDE

WIDTH OF CUT


HEAD DIA +.000 / -.010

5° ANGLE

ORDER

EDP#SHANK

DIA.

HEAD

DIAMETER

O.A.L.

LENGTH

3/161/45/163/81/25/8

NECK

DIAMETER

NECK

LENGTH

# OF

TEETH

WIDTH

OF CUT

86-010086-010586-011086-011586-012086-0125

.100

.135

.175

.210

.300

.405

3/161/45/163/81/25/8

444466

2-1/22-1/22-1/22-1/23"3-1/2

.500

.625

.750

.8751.0001.250

1/41/41/41/41/41/4

DOVETAIL CUTTERS 5° PER SIDE 10° INCLUDED

ORDER

EDP#

SHANK

DIA. HEAD

DIAMETER

O.A.L.

LENGTH

3/161/45/163/81/25/8

NECK

DIAMETER

NECK

LENGTH

# OF

TEETH

WIDTH

OF CUT

86-020086-020586-021086-021586-022086-0225

.090

.120

.140

.175

.250

.350

3/161/45/163/81/25/8

444466

2-1/22-1/22-1/22-1/23"3-1/2

1/41/41/41/41/41/4

.250

.350

.450

.550

.650

.750

WIDTH OF CUT


HEAD DIA +.000 / -.010

10° ANGLE

ITI CARBIDE

ITI CARBIDE

INTERNAL

INTERNAL

SERIES 86

SERIES 86


ITI CARBIDE: UN-MATCHED BY ANY OTHER

ALTINCOATED EDP#

86-1200-C86-1205-C86-1210-C86-1215-C86-1220-C86-1225-C

ALTINCOATED EDP#

86-0100-C86-0105-C86-0110-C86-0115-C86-0120-C86-0125-C

ALTINCOATED EDP#

86-0200-C86-0205-C86-0210-C86-0215-C86-0220-C86-0225-C


made from

made from

made from

ORDER

EDP#

SHANK

DIA.

SERIES 86

HEAD

DIAMETER

O.A.L.

LENGTH

3/161/45/163/81/25/8

NECK

DIAMETER

NECK

LENGTH

# OF

TEETH

WIDTH

OF CUT

86-100086-100586-101086-101586-102086-1025

.110

.150

.200

.230

.320

.345

3/161/45/163/81/25/8

444466

2-1/22-1/22-1/22-1/23"3-1/2

1/41/41/41/41/41/4

.125

.160

.190

.250

.320

.500


HEAD DIA +.000 / -.010

15° ANGLE

WIDTH OF CUT

ITI CARBIDE

INTERNAL ALTINCOATED EDP#

86-1000-C86-1005-C86-1010-C86-1015-C86-1020-C86-1025-C


made from

DOVETAIL CUTTERS

SOLID CARBIDE DOVETAIL CUTTERS


CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL



DOVETAIL CUTTERS

ORDER

EDP#

SHANK

DIA.

HEAD

DIAMETER O.A.L.

LENGTH

NECK

DIAMETER

NECK

LENGTH

# OF

TEETH WIDTH

OF CUT

ORDER

EDP#

SHANK

DIA.

HEAD

DIAMETER O.A.L.

LENGTH NECK

DIAMETER

NECK

LENGTH

# OF

TEETH

WIDTH

OF CUT

1/83/161/45/163/81/25/83/4

1/83/161/45/163/81/25/83/47/81"

.062

.090

.125

.125

.160

.200

.260

.311

.054

.080

.100

.160

.180

.250

.315

.380

1/83/161/45/163/81/25/83/4

33445666

2"2-1/22-1/22-1/22-1/23"3-1/24"

3/161/41/41/41/41/41/41/4

86-109586-110086-110586-110786-111086-111586-111786-1118

86-111986-112086-112586-112786-113086-113586-113786-113986-114286-1144

.062

.090

.115

.150

.125

.185

.245

.290

.335

.360

.032

.045

.062

.080

.120

.150

.190

.230

.270

.320

1/83/161/45/163/81/25/83/47/81"

3334446666

2"2-1/22-1/22-1/22-1/23"3-1/24"4"4"

3/161/41/41/41/41/41/41/41/41/4



WIDTH OF CUT

30° ANGLE

HEAD DIA +.000 / -.010

HEAD DIA +.000 / -.010

ORDER

EDP#

SHANK

DIA.

HEAD

DIAMETER O.A.L.

LENGTH NECK

DIAMETER

NECK

LENGTH

# OF

TEETH WIDTH

OF CUT

3/161/45/163/81/25/8

86-116086-116586-117086-117586-118086-1185

.070

.080

.095

.100

.170

.180

.032

.048

.062

.078

.094

.125

3/161/45/163/81/25/8

334445

2-1/22-1/22-1/22-1/23"3-1/2

1/41/41/41/41/41/4

45° ANGLE

WIDTH OF CUT

WIDTH OF CUT

HEAD DIA +.000 / -.010

60° ANGLE

ITI CARBIDE

ITI CARBIDE

ITICARBIDE

INTERNAL

INTERNAL

INTERNAL

SERIES 86

SERIES 86

SERIES 86


ORDER

EDP#

SHANK

DIA.

HEAD

DIAMETER

O.A.L.

LENGTH

NECK

DIAMETER

NECK

LENGTH

# OF

TEETH WIDTH

OF CUT

1/83/161/45/163/81/25/8

86-125086-125586-126086-126586-127086-127586-1280

.062

.090

.125

.125

.160

.200

.260

.085

.130

.170

.255

.305

.405

.500

1/83/161/45/163/81/25/8

3334566

2"2-1/22-1/22-1/22-1/23"3-1/2

3/161/41/41/41/41/41/4


HEAD DIA +.000 / -.010

20° ANGLE

WIDTH OF CUT

ITI CARBIDE

INTERNAL

SERIES 86

ALTINCOATED EDP#

ALTINCOATED EDP#

ALTINCOATED EDP#

ALTINCOATED EDP#

86-1250-C86-1255-C86-1260-C86-1265-C86-1270-C86-1275-C86-1280-C

86-1095-C86-1100-C86-1105-C86-1107-C86-1110-C86-1115-C86-1117-C86-1118-C

86-1119-C86-1120-C86-1125-C86-1127-C86-1130-C86-1135-C86-1137-C86-1139-C86-1142-C86-1144-C

86-1160-C86-1165-C86-1170-C86-1175-C86-1180-C86-1185-C





made from

made from

made from

made from

DOVETAIL CUTTERS

INTERNAL TOOL


TA

LO

G F

OU

RT

EE

N

ORDER

EDP#SHANK

DIA.

HEAD

DIAMETER O.A.L.

LENGTH

NECK

DIAMETER

NECK

LENGTH

# OF

TEETH

WIDTH

OF CUT

1/8

3/16

1/4

5/16

3/8

1/2

5/8

3/4

.062

.090

.125

.125

.160

.200

.260

.311

.054

.100

.100

.160

.180

.250

.315

.380

1/8

3/16

1/4

5/16

3/8

1/2

5/8

3/4

3

3

4

4

5

6

6

6

2"

2-1/2

2-1/2

2-1/2

2-1/2

3"

3-1/2

4"

3/16

1/4

1/4

1/4

1/4

1/4

1/4

1/4

86-300086-300586-301086-301586-302086-302586-303086-303586-304086-304586-305086-305586-306086-306586-307086-307586-308086-308586-309086-309586-400086-400586-401086-401586-402086-402586-403086-4035


WIDTH OF CUT

30° ANGLE

HEAD DIA +.000 / -.015

ITI CARBIDE

INTERNAL

SERIES 86

ALTINCOATED EDP#

DOVETAIL CUTTERSWITH A TIP RADIUS 30° PER SIDE 60° INCLUDED

made from

RADIUS

SIZE

.005

.010

.015

.005

.010

.015

.005

.010

.015

.005

.010

.015

.005

.010

.015

.030

.005

.010

.015

.030

.005

.010

.015

.030

.005

.010

.015

.030

ORDER

EDP#

SHANK

DIA.

SERIES 86

HEAD

DIAMETER

O.A.L.

LENGTH

3/16

1/4

5/16

3/8

1/2

5/8

NECK

DIAMETER

NECK

LENGTH

# OF

TEETH

WIDTH

OF CUT

DOVETAIL CUTTERS WITH A RADIUS

86-250086-250586-251086-251586-252086-253086-253586-254086-254586-255086-255586-256086-256586-257086-257586-258086-258586-259086-259586-2600

.110

.150

.200

.230

.320

.345

3/16

1/4

5/16

3/8

1/2

5/8

4

4

4

4

6

6

2-1/2

2-1/2

2-1/2

2-1/2

3"

3-1/2

1/4

1/4

1/4

1/4

1/4

1/4

.125

.160

.190

.250

.320

.500


HEAD DIA +.000 / -.015

15° ANGLE WIDTH OF CUT

ITI CARBIDE

INTERNAL ALTINCOATED EDP#


made from

RADIUS

SIZE

.005

.010

.015

.005

.010

.015

.005

.010

.015

.005

.010

.015

.005

.010

.015

.030

.005

.010

.015

.030

86-2500-C86-2505-C86-2510-C86-2515-C86-2520-C86-2530-C86-2535-C86-2540-C86-2545-C86-2550-C86-2555-C86-2560-C86-2565-C86-2570-C86-2575-C86-2580-C86-2585-C86-2590-C86-2595-C86-2600-C


94

DOVETAIL CUTTERS


RADIUS

RADIUS


CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL


ORDER

EDP#

SHANK

DIA.

HEAD

DIAMETER

O.A.L.

LENGTH

NECK

DIAMETER

NECK

LENGTH

# OF

TEETH

WIDTH

OF CUT

1/8

3/16

1/4

5/16

3/8

1/2

5/8

3/4

7/8

1"

86-500086-500586-501086-501586-502086-502586-503086-503586-504086-504586-505086-505586-506086-506586-507086-507586-508086-508586-509086-509586-600086-600586-601086-601586-602086-602586-603086-603586-604086-604586-605086-605586-606086-606586-607086-607586-608086-608586-609086-609586-700086-700586-7010

.062

.090

.115

.150

.125

.185

.245

.290

.335

.360

1/8

3/16

1/4

5/16

3/8

1/2

5/8

3/4

7/8

1"

3

3

3

4

4

4

6

6

6

6

2"

2-1/2

2-1/2

2-1/2

2-1/2

3"

3-1/2

4"

4"

4"

3/16

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4


HEAD DIA +.000 / -.015

45° ANGLE

WIDTH OF CUT

ITI CARBIDE

INTERNAL

SERIES 86

ALTINCOATED EDP#


made from

.005

.010

.015

.005

.010

.015

.005

.010

.015

.030

.005

.010

.015

.030

.005

.010

.015

.030

.005

.010

.015

.030

.060

.005

.010

.015

.030

.060

.005

.010

.015

.030

.060

.005

.010

.015

.030

.060

.005

.010

.015

.030

.060


.032

.045

.062

.080

.120

.150

.190

.230

.270

.320

RADIUS

SIZE

95

DOVETAIL CUTTERS WITH A RADIUS

DOVETAIL CUTTERS


RADIUS


INTERNAL TOOL


TA

LO

G F

OU

RT

EE

N

CA

RB

IDE

DO

VE

TA

IL C

UT

TE

RS

MA

DE

TO

YO

UR

SP

EC

IFIC

AT

ION

S

DOVETAIL CUTTERS

IF YOUR NOT SURE O

F A DIM

ENSIO

N LEAVE IT

BLANK AND W

E W

ILL Q

UOTE THE STANDARD

IT'S CHEAPER THAT W

AY

Sim

ply m

ake

a co

py

fill in th

e in

form

atio

n below and fa

x or e

mail to

us.

fax #

909-392-2627 w

e w

ill quote as so

on as p

ossib

le.

INFO@

internalto

ol.co

m Any d

imensio

n yo

ur

not su

re of le

ave

blank w

e w

ill quote sta

ndard

ITI CARBIDE: SPECIALLY BLENDED FOR OPTIMUM PERFORMANCE96

CO

MP

ANY N

AME

YOU

R NA

ME

PHO

NE #

EMAIL

YOU

R

DISTR

IBUTO

R QU

OT

QU

AN

OVERALL LENG

TH

NECK LENGTH

TO

LERAN

CE

UN

LESS SPE

CIFIED

DR

AWN

BY:

DATE

WIDTH O

F CUT

SOLID

CARBIDED

OVETAIL

CUTTER

SHANK DIAMETER

.X +/- .015.XX

+/-.005.XX

X +/-.002

NO

TES

TOO

LN

UM

BER

:

INTERNAL

TOO

L

TYPE OF M

ATERIAL TO BE CUT

HEAD DIAMETER

ANGLE FROM

CENT

CORNER RADIUS SIZE

NECK DIAMETER


CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL


ORDER

EDP#

SHANK

DIA.

HEAD

DIAMETER O.A.L.

LENGTH

NECK

DIAMETER

NECK

LENGTH

WIDTH

OF CUT

1/8

3/16

1/4

5/16

3/8

1/2

.075

.115

.155

.200

.240

.320

.107

.160

.213

.266

.325

.425

29-4000

29-4005

29-4010

29-4015

29-4020

29-4025

29-4030

29-4035

29-4040

29-4045

29-4050

29-4055

29-4060

29-4065

29-4070

29-4075

29-4080

29-4085

29-4090

29-4095

29-4100

29-4105

29-4110

29-4115

29-4120

29-4125

29-4130

29-4135

29-4140

29-4145

29-4150

29-4155

29-4160

29-4165

29-4170

29-4175

29-4180

29-4185

29-4190

29-4195

29-4200

29-4205

29-4210

ITI CARBIDESERIES 29

ALTINCOATED EDP#

LOLLI POPS ....UNDERCUTTING ENDMILLS 270° CUT 10° HELIX

made from

.250

.375

.500

.750

1.000

1.250

1.500

.250

.375

.500

.750

1.000

1.250

1.500

.250

.375

.500

.750

1.000

1.250

1.500

2.000

.250

.375

.500

1.000

1.250

1.500

2.000

.250

.375

.500

.750

1.000

1.250

1.500

2.000

.375

.500

1.000

1.250

1.500

2.000

29-4000-C

29-4005-C

29-4010-C

29-4015-C

29-4020-C

29-4025-C

29-4030-C

29-4035-C

29-4040-C

29-4045-C

29-4050-C

29-4055-C

29-4060-C

29-4065-C

29-4070-C

29-4075-C

29-4080-C

29-4085-C

29-4090-C

29-4095-C

29-4100-C

29-4105-C

29-4110-C

29-4115-C

29-4120-C

29-4125-C

29-4130-C

29-4135-C

29-4140-C

29-4145-C

29-4150-C

29-4155-C

29-4160-C

29-4165-C

29-4170-C

29-4175-C

29-4180-C

29-4185-C

29-4190-C

29-4195-C

29-4200-C

29-4205-C

29-4210-C

THEIR SPECIAL IS OUR STANDARD

+.000 /-.002 +.015 +.000 /-.005 +.030

HEAD

DIAMETER

+.000 / -.002

WIDTH

OF CUT

NECK

DIAMETER NECK

LENGTH

SHANK

DIA.

O.A.L.

LENGTH

APPLICATION :

AVAILABLE IN UN-COATED OR ALTIN COATED

97

4 FLUTE

4"

4"

4"

5/16

3/8

1/4

UNDERCUTTING ENDMILLS

MOLD RELIEF CUTS ANDPROFILE MILLING

4"

3"

3/8

1/4

3"

3"

3"

2-1/2

2-1/2

1/2

1/2

5/16

3/16

1/8

INTERNAL TOOL


TA

LO

G F

OU

RT

EE

N

ORDER

EDP#

SERIES 92

HEAD

DIAMETER

1/8

3/16

1/4

5/16

3/8

1/2

5/8*

3/4*

NECK

DIAMETER

# OF

TEETH WIDTH

OF CUT

4

4

4

4

4

4

6

5

.050

.080

.125

.160

.250

.250

.250

.250

.020

.026

.032

.040

.050

.067

.070

.100

30° INC. DOUBLE ANGLE CUTTERS


15° ANGLEPER SIDE


92-0880

92-0885

92-0890

92-0895

92-0900

92-0905

92-0902

92-0904

92-0907

92-0910

92-0912

92-0920

92-0925

92-0930

.188

.375

.250

.750

.250

.750

.312

1.000

.312

1.000

.375

1.250

.250

.250

NECK

LENGTH

ITI CARBIDE

HEAD DIAMETER +.000 / -.005

NECK DIAMETER +.000 / -.010

FOR CUTTING CHAMFERS,SERRATIONS, ANGLES ETC.APPLICATION :

SHANK

DIA. ALTINCOATED EDP#

ORDER

EDP#

HEAD

DIAMETER

1/8

3/16

1/4

5/16

3/8

1/2

5/8*

3/4*

NECK

DIAMETER

# OF

TEETH WIDTH

OF CUT

4

4

4

4

4

4

5

5

.050

.080

.125

.160

.187

.250

.250

.250

.030

.044

.050

.062

.075

.100

.125

.150


92-1500

92-1505

92-1510

92-1515

92-1520

92-1525

92-1530

92-1535

92-1540

92-1545

92-1550

92-1555

92-1560

92-1565

.188

.375

.250

.750

.250

.750

.312

1.000

.312

1.000

.375

1.250

.250

.250

NECK

LENGTH

ALTINCOATED EDP#

ORDER

EDP#

1/8

3/16

1/4

5/16

3/8

1/2

5/8*

3/4*

NECK

DIAMETER

# OF

TEETH WIDTH

OF CUT

4

4

4

4

4

4

5

5

.062

.093

.125

.160

.188

.250

.250

.250

.062

.093

.125

.088

.109

.140

.144

.217


92-1180

92-1185

92-1190

92-1195

92-1200

92-1205

92-1207

92-1208

92-1210

92-1215

92-1220

92-1225

92-1230

92-1235

.188

.375

.250

.750

.250

.750

.312

1.000

.312

1.000

.375

1.250

.250

.250

NECK

LENGTH

ALTINCOATED EDP#

SHANK

DIAMETER

1/8

3/16

1/4

5/16

3/8

1/2

3/8

3/8

* CARBIDE HEAD WITH STEEL SHANK

92-0880-C

92-0885-C

92-0890-C

92-0895-C

92-0900-C

92-0905-C

92-0902-C

92-0904-C

92-0907-C

92-0910-C

92-0912-C

92-0920-C

92-0925-C

92-0930-C



92-1500-C

92-1505-C

92-1510-C

92-1515-C

92-1520-C

92-1525-C

92-1530-C

92-1535-C

92-1540-C

92-1545-C

92-1550-C

92-1555-C

92-1560-C

92-1565-C

92-1180-C

92-1185-C

92-1190-C

92-1195-C

92-1200-C

92-1205-C

92-1207-C

92-1208-C

92-1210-C

92-1215-C

92-1220-C

92-1225-C

92-1230-C

92-1235-C

SHANK

DIAMETER

1/8

3/16

1/4

5/16

3/8

1/2

3/8

3/8

SHANK

DIAMETER

1/8

3/16

1/4

5/16

3/8

1/2

3/8

3/8

OVERALL

LENGTH

2"

2-1/2"

2-1/2"

2-1/2"

2-1/2"

3"

3"

3"

OVERALL

LENGTH

2"

2-1/2"

2-1/2"

2-1/2"

2-1/2"

3"

3"

3"

OVERALL

LENGTH

2"

2-1/2"

2-1/2"

2-1/2"

2-1/2"

3"

3"

3"

SHANK

DIA.



22.5° ANGLEPER SIDE

45°INCLUDED ANGLE



SHANK

DIA.


30° ANGLEPER SIDE

60°INCLUDED ANGLE




30°INCLUDED ANGLE

HEAD

DIAMETER

98

made from

DOUBLE A

NGLE


CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL


DOUBLE ANGLE CUTTERS



ORDER

EDP# HEAD

DIAMETER

NECK

DIAMETER

# OF

TEETH

WIDTH

OF CUT

2

4

4

4

4

4

4

6

4

6

6

88

88

.045

.062

.093

1/8

3/16

3/16

1/4

1/4

.300

.250

.280

.250

.280

.250

.490

.047

.062

.093

.120

.125

.185

.250

.125

.187

.312

.187

.250

.125

.250

.125

.250

90° INC. DOUBLE ANGLE CUTTERS NECK

LENGTH

SERIES 92

120° INC. DOUBLE ANGLE CUTTERSITI CARBIDE

.125

.250

.188

.500

.250

.500

.750

1.000

.250

.500

.750

1.000

.500

.750

1.000

.312

.500

.750

1.000

.375

.625

.875

1.250

.250

.250

.500

.750

1.250

.250

.250

.250

.250

.250

.250

45° ANGLEPER SIDE








60° ANGLEPER SIDE

FOR CUTTING CHAMFERS,SERRATIONS, ANGLES ETC.

APPLICATION :


ALTINCOATED EDP#

3/32

1/8

3/16

1/4

5/16

3/8

1/2

1/2 *

5/8

5/8*

3/4 *

1" *

92-0955

92-0960

92-0965

92-0970

92-0975

92-0980

92-0985

92-0990

92-1000

92-1002

92-1005

92-1006

92-1007

92-1008

92-1009

92-1010

92-1011

92-1012

92-1015

92-1020

92-1022

92-1023

92-1025

92-1100

92-1105

92-1106

92-1107

92-1108

92-1110

92-1115

92-1117

92-1120

92-112592-1130

SHANK

DIAMETER

ORDER

EDP# HEAD &

SHANK DIA.

1/8

3/16

1/4

5/16

3/8

1/2

NECK

DIAMETER

# OF

TEETH WIDTH

OF CUT

4

4

4

4

4

4

.062

.094

.125

.150

.188

.250

.109

.163

.215

.281

.320

.430

92-1280

92-1285

92-1290

92-1295

92-1300

92-1302

92-1304

92-1306

92-1310

92-1315

92-1320

92-1325

.188

.500

.250

.750

.250

.750

.312

1.000

.312

1.000

.375

1.250

NECK

LENGTH

ALTINCOATED EDP#

1/8

1/8

3/16

1/4

5/16

3/8

1/2

1/2

5/8

1/2

1/2

1/2


1/4

92-0955-C

92-0960-C

92-0965-C

92-0970-C

92-0975-C

92-0980-C

92-0985-C

92-0990-C

92-1000-C

92-1002-C

92-1005-C

92-1006-C

92-1007-C

92-1008-C

92-1009-C

92-1010-C

92-1011-C

92-1012-C

92-1015-C

92-1020-C

92-1022-C

92-1023-C

92-1025-C

92-1100-C

92-1105-C

92-1106-C

92-1107-C

92-1108-C

92-1110-C

92-1115-C

92-1117-C

92-1120-C

92-1125-C92-1130-C

SHANK

DIAMETER

1/8

3/16

1/4

5/16

3/8

1/2

92-1280-C

92-1285-C

92-1290-C

92-1295-C

92-1300-C

92-1302-C

92-1304-C

92-1306-C

92-1310-C

92-1315-C

92-1320-C

92-1325-C

OVERALL

LENGTH

2"

2-1/2"

2-1/2"

2-1/2"

2-1/2"

3"

OVERALL

LENGTH

2"

2"

2-1/2"

2-1/2"

2-1/2"

2-1/2"

3"

3-1/8

3-1/2

3-1/8

3-1/8

3-1/8

90°INCLUDED ANGLE

120°INCLUDED ANGLE

SHANK

DIA.

SHANK

DIA.

99

made from

made from

DOUBLE A

NGLE

INTERNAL TOOL


TA

LO

G F

OU

RT

EE

N

1/4" NECKLENGTH+.030 / -.000

ORDER

EDP#

SERIES 88

HEAD

DIAMETER

1/4"

NECK DIA.

# OF

TEETH

WIDTH

OF CUT

6

8

PITCH RANGE

THREAD MILLS

DEPTH OF CUT +.030 / -.000

WIDTH OF CUT+.005 / -.000 HEAD DIA.

+.000 / -.005

60°INCLUDED ANGLE

1/2" DIA.

EXTRA L

ONG 2

-3/4" SHANK

SOLID CARBIDE MINI THREAD MILLS

HEAD DIA.+.015 / -.000


NECK DIA.+.000 / -.005

SHANK DIA.+.000 / -.0005

60°INCLUDED ANGLE

ORDER

EDP#

HEAD

DIAMETER

NECK

DIA.

# OF

TEETH

WIDTH

OF CUT

DEPTH

OF CUT

SHANK

DIA.

88-0870

88-0880

88-0890

88-0900

88-0910

88-0915

88-1000

88-1005

88-1010

88-1015

88-1017

88-1020

88-1025

88-1027

88-1030

88-1035

88-1040

88-1045

88-1050

88-1055

88-1060

88-1065

88-1070

1/4

3/8

1/2

1/4

3/8

1/2

1/4

1/2

3/8

3/4

1"

3/8

3/4

1"

1/2

1"

1/2

3/4

1"

1-1/4

1"

1-1/4

1-1/2

1/8

1/8

1/8

1/8

1/8

1/8

3/16

3/16

3/16

3/16

3/16

1/4

1/4

1/4

5/16

5/16

3/8

3/8

3/8

3/8

1/2

1/2

1/2

.030

.035

.046

.055

.065

.078

.095

.100

.050

.060

.070

.090

.130

.180

.200

.300

3

3

3

3

3

3

3

3

3

3

3

4

4

4

4

4

6

6

6

6

5

5

5

.098

.125

.148

3/16

1/4

5/16

3/8

1/2

88-1100

88-1105

88-1110

88-1112

88-1115

88-1120

88-1125

88-1130

1/2

5/8

3/4

1"

ITI CARBIDE

THREAD MILLS

MILL EXTERNAL THREADS MILL INTERNAL THREADS

APPLICATION:1. THREAD MILLING ELIMINATES THE NEED FORSPECIAL TAPS. CUT ANY SIZE THREAD YOUWANT. UNDER SIZE, OVER SIZE, ANY PITCH,EVEN A TAPERED THREAD.

2. THREAD BLIND HOLES ALL THE WAY DOWNTO THE BOTTOM WITH MINIMUM LEAD.

TYPICAL TOOTH SHAPE

60°INCLUDED ANGLE

THREAD MILLS HAVE A SMALL FLAT ONTHE TIP. SIZE DEPENDS ON PITCH. IF YOUR APPLICATION DOSEN'TREQUIRE A FLAT, TRY OUR DOUBLEANGLE CUTTERS ON PAGE 88.

SMALL FLAT




QUICK SELECTOR FOR

STANDARD I.D.THREADS

INCH METRIC TOOL TO USE

5-40

5-44

6-32

6-40

8-32

8-36

10-32

10-24

12-24

12-28

1/4-20

1/4-28

1/4-18

5/16-18

5/16-24

3/8-16

3/8-24

7/16-14

7/16-20

1/2-13

1/2-20

9/16-12

9/16-18

5/8-11

5/8-18

3/4-10

3/4-16

M3.0 X .5

M3.5 X .6

88-087088-088088-0890

88-090088-091088-0915

88-100088-1005

88-1010

88-102088-102588-1027

88-103088-103588-104088-104588-105088-1055

88-106088-106588-1070

.062

.062

.094

.135

.094

.156

.156

.250

16 - 3216 - 3211 - 288 - 2811 - 247 - 247 - 204 - 18

PITCH

RANGE

32-64

30-56

20-56

18-56

16-48

14-40

12-32

11-32

ALTINCOATED EDP#

88-0870-C

88-0880-C

88-0890-C

88-0900-C

88-0910-C

88-0915-C

88-1000-C

88-1005-C

88-1010-C

88-1015-C

88-1017-C

88-1020-C

88-1025-C

88-1027-C

88-1030-C

88-1035-C

88-1040-C

88-1045-C

88-1050-C

88-1055-C

88-1060-C

88-1065-C

88-1070-C

88-1100-C

88-1105-C

88-1110-C

88-1112-C

88-1115-C

88-1120-C

88-1125-C

88-1130-C

ALTINCOATED EDP#

M4.0 X .7

M4.5 X .75

M5.0 X .8

M6.0X 1.0

M7.0 X 1.0

M8.0 X 1.5

M8.0X1.0

M8.0X1.25

M10.0X1.0

M10.0 X 1.25

M16X2.0

M16X5.0

M12.0X 1.25

M12.0 X 1.75

M14.0 X 1.5

M14.0X 2.0

made from

made from

100

CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL


SERIES 89

SIZECUTTING

DIAMETER

THREAD MILLS ALTIN COATED

ITI CARBIDE

MULTIPLE THREAD INTERNAL / EXTERNAL

ALTINCOATED EDP#

.115

.115

.115

.120

.120

.180

.180

.240

.240

.290

.290

.340

.340

.350

.350

.370

.370

.470

.470

.495

.495

.620

.620

.620

.620

THREAD

LENGTH

OVERALL

LENGTH

NUMBER

OF FLUTES

SHANK

SIZE

6-328-328-3610-2410-321/4-201/4-285/16-185/16-243/8-163/8-247/16-147/16-201/2-131/2-209/16-129/16-185/8-115/8-183/4-103/4-167/8-97/8-141"-81"-12

.218

.250

.250

.312

.312

.500

.500

.625

.625

.750

.750

.875

.875

.875

.875

.875

.8751.2501.2501.2501.2501.2501.2501.375

1.375

2"2"2"2"2"

2-1/2"2-1/2"2-1/2"2-1/2"3"3"3"3"

3-1/2"3-1/2"3-1/2"3-1/2"3-1/2"3-1/2"3-1/2"3-1/2"3-1/2"3-1/2"4"4"

3333333334444444455555555

1/81/81/83/163/163/163/161/41/45/165/163/83/83/83/81/21/21/21/21/21/25/85/83/43/4

89-120089-120589-121089-121589-122089-122589-123089-123589-124089-124589-125089-125589-126089-126589-127089-127589-128089-128589-129089-129589-130089-130589-131089-1315

89-1320

MILL INTERNAL OR EXTERNAL THREADS IN ONE PASS

THREAD

LENGTH

CUTTING

DIAMETER

OVERALL

LENGTH

SHANK

SIZE

made from

101

THREAD MILLS


INTERNAL TOOL


TA

LO

G F

OU

RT

EE

N

ITI CARBIDE

STUB ACME EXTERNAL THREAD MILLS

made from

SHANK DIAMETER

CUT DIA.

REACH

OVERALL LENGTH

TIP WIDTH

THREAD

SIZE

CUT

DIA.

ALTINCOATED EDP#

OVERALL

LENGTH # OF

TEETH

SHANK

SIZE

.170

.220

.270

.370

.500

.750

.8001.120

2-1/2

2-1/2

2-1/2

2-1/2

3"

3"

3-1/8"

3-1/8"

3

3

4

4

4

6

68

REACH

1/4

1/4

5/16

3/8

1/2

1/2*

1/2 *

1/2*

EDP#

35-6000

35-6005

35-6010

35-6015

35-6020

35-6025

35-6030

35-6035

.375

.500

.750

.750

1.00

1.00

2.00

2.00

16

14

12

10

8

6

5

4

TIP

WIDTH

.024

.028

.033

.037

.048

.065

.079

.100

35-6000-C

35-6005-C

35-6010-C

35-6015-C

35-6020-C

35-6025-C

35-6030-C

35-6035-C

29° INCLUDED ANGLE

102

ACME EXTERNAL THREAD MILLS

THREAD

SIZE

CUT

DIA.

ALTINCOATED EDP#

OVERALL

LENGTH

# OF

TEETH

SHANK

SIZE

.170

.220

.270

.370

.500

.750

.8001.120

2-1/2

2-1/2

2-1/2

2-1/2

3"

3"

3-1/8"

3-1/8"

3

3

4

4

4

6

68

REACH

1/4

1/4

5/16

3/8

1/2

1/2*

1/2*

1/2*

EDP#

35-5000

35-5005

35-5010

35-5015

35-5020

35-5025

35-5030

35-5035

.375

.500

.750

.750

1.00

1.00

2.00

2.00

TIP

WIDTH

.021

.024

.028

.032

.041

.057

.069

.088

35-5000-C

35-5005-C

35-5010-C

35-5015-C

35-5020-C

35-5025-C

35-5030-C

35-5035-C

16

14

12

10

8

6

5

4

SERIES 35


* CARBIDE HEAD ON HARDENED STEEL SHANK

EXTERNAL ACME THREAD MILLS

CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL


SERIES 135

STUB ACME INTERNAL THREAD MILLS

103

THREAD

SIZE

CUT

DIA.

ALTINCOATED EDP#

OVERALL

LENGTH

# OF

TEETH

SHANK

DIA.

.170

.200

.235

.320

.400

.490

.620

.745

.745

2-1/2

2-1/2

2-1/2

3"

3-1/2"

3-1/2"

4"

5"

5"

4

4

4

4

4

5

5

5

5

REACH

1/4

1/4

1/4

3/8

1/2

1/2

5/8

3/4

3/4

EDP#

.500

.750

1.000

1.250

1.300

1.300

1.750

1.500

2.500

1/4-16

5/16-14

3/8-12

1/2-10

5/8-8

3/4-6

7/8-6

1"-5

1-1/8-5

1-1/4-5

1-3/8-4

1-1/2-4

1-3/4-4

TIP

WIDTH

.024

.028

.033

.037

.048

.065

.079

.100

.100

ACME INTERNAL THREAD MILLS

135-4000

135-4005

135-4010

135-4015

135-4020

135-4025

135-4030

135-4035

135-4040

THREAD

SIZE

CUT

DIA.

ALTINCOATED EDP#

OVERALL

LENGTH

# OF

TEETH

SHANK

DIA.

.170

.200

.235

.320

.400

.490

.620

.745

.745

2-1/2

2-1/2

2-1/2

3"

3-1/2"

3-1/2"

4"

5"

5"

4

4

4

4

4

5

5

5

5

REACH

1/4

1/4

1/4

3/8

1/2

1/2

5/8

3/4

3/4

EDP#

.500

.750

1.000

1.250

1.300

1.300

1.750

1.500

2.500

1/4-16

5/16-14

3/8-12

1/2-10

5/8-8

3/4-6

7/8-6

1"-5

1-1/8-5

1-1/4-5

1-3/8-4

1-1/2-4

1-3/4-4

TIP

WIDTH

.021

.024

.028

.032

.041

.057

.069

.088

.088

135-3000

135-3005

135-3010

135-3015

135-3020

135-3025

135-3030

135-3035

135-3040


135-4000-C

135-4005-C

135-4010-C

135-4015-C

135-4020-C

135-4025-C

35-4030-C

135-4035-C

135-4040-C

135-3000-C

135-3005-C

135-3010-C

135-3015-C

135-3020-C

135-3025-C

35-3030-C

135-3035-C

135-3040-C

SHANK DIAMETER

CUT DIA.

REACH

OVERALL LENGTH

TIP WIDTH

29° INCLUDED ANGLE

INTERNAL STUB ACME THREAD MILLS



HP USER

Rectangle

HP USER

Text Box

missouricarbide.com

INTERNAL TOOL


TA

LO

G F

OU

RT

EE

N

SERIES 93

CUTTING

DIAMETER

CARBIDE REAMERSITI CARBIDE

STRAIGHT FLUTE RIGHT HAND CUT

OVERALL

LENGTH NUMBER

OF FLUTES

SHANK

SIZE

.0620

.0625

.0630

.0635

.0930

.0935

.0938

.0940

.0945

.1090

.1094

.1100

.1240

.1245

.1250

.1255

.1700

.1719

.1725

.1860

.1865

.1870

.1875

.1880

.1885

.2025

.2031

.2035

.2330

.2340

.2344

.2350

.2470

.2475

.2480

.2485

.2490

.2495

.2500

.2505

.2510

.2515

.2520

.2650

.2656

.2660

.2800

.2812

.2820

.2960

.2965

.2969

.2975

93-0620

93-0625

93-0630

93-0635

93-0930

93-0935

93-0938

93-0940

93-0945

93-1090

93-1094

93-1100

93-1240

93-1245

93-1250

93-1255

93-1700

93-1719

93-1725

93-1860

93-1865

93-1870

93-1875

93-1880

93-1885

93-2025

93-2031

93-2035

93-2330

93-2340

93-2344

93-2350

93-2470

93-2475

93-2480

93-2485

93-2490

93-2495

93-2500

93-2505

93-2510

93-2515

93-2520

93-2650

93-2656

93-2660

93-2800

93-2812

93-2820

93-2960

93-2965

93-2969

93-2975

FLUTE

LENGTH

1-1/2"

1-1/2"

1-1/2"

1-1/2"

2"

2"

2"

2"

2"

2-1/4"

2-1/4"

2-1/4"

2-1/4"

2-1/4"

2-1/4"

2-1/4"

2-3/4"

2-3/4"

2-3/4"

2-3/4"

2-3/4"

2-3/4"

2-3/4"

2-3/4"

2-3/4"

3"

3"

3"

3"

3"

3"

3"

3"

3"

3"

3"

3"

3"

3"

3"

3"

3"

3"

3-1/4"

3-1/4"

3-1/4"

3-1/4"

3-1/4"

3-1/4"

3-1/4"

3-1/4"

3-1/4"

3-1/4"

.3115

.3120

.3125

.3130

.3135

.3275

.3281

.3285

.3430

.3435

.3438

.3445

.3590

.3594

.3600

.3730

.3735

.3740

.3745

.3750

.3755

.3760

.3900

.3906

.3910

.4060

.4062

.4070

.4210

.4219

.4225

.4365

.4370

.4375

.4380

.4525

.4531

.4540

.4680

.4688

.4695

.4840

.4844

.4850

.4980

.4985

.4990

.4995

.5000

.5005

.5010

CUTTING

DIAMETER

1-1/8"

1-1/8"

1-1/8"

1-1/8"

1-1/8"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-3/8"

1-3/8"

1-3/8"

1-3/8"

1-3/8"

1-3/8"

1-3/8"

1-3/8"

1-3/8"

1-3/8"

1-3/8"

1-3/8"

1-3/8"

1-1/2"

1-1/2"

1-1/2"

1-1/2"

1-1/2"

1-1/2"

1-1/2"

1-1/2"

1-1/2"

1-1/2"

OVERALL

LENGTH NUMBER

OF FLUTES

SHANK

SIZE

93-3115

93-3120

93-3125

93-3130

93-3135

93-3275

93-3281

93-3285

93-3430

93-3435

93-3438

93-3445

93-3590

93-3594

93-3600

93-3730

93-3735

93-3740

93-3745

93-3750

93-3755

93-3760

93-3900

93-3906

93-3910

93-4060

93-4062

93-4070

93-4210

93-4219

93-4225

93-4365

93-4370

93-4375

93-4380

93-4525

93-4531

93-4540

93-4680

93-4688

93-4695

93-4840

93-4844

93-4850

93-4980

93-4985

93-4990

93-4995

93-5000

93-5005

93-5010

FLUTE

LENGTH

3-1/4"

3-1/4"

3-1/4"

3-1/4"

3-1/4"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

3-1/2"

4"

4"

4"

4"

4"

4"

4"

4"

4"

4"

4"

4"

4"

4"

4"

4"

4"

4"

4"

4"

4"

4"

4"

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

6

ORDER

EDP #

ORDER

EDP #

DIAMETERS +.0003 / -.0000

.0620

.0625

.0630

.0635

.0930

.0935

.0938

.0940

.0945

.1090

.1094

.1100

.1240

.1245

.1250

.1255

.1700

.1719

.1725

.1860

.1865

.1870

.1875

.1880

.1885

.2025

.2031

.2035

.2330

.2340

.2344

.2350

.2470

.2475

.2480

.2485

.2490

.2495

.2500

.2505

.2510

.2515

.2520

.2650

.2656

.2660

.2800

.2812

.2820

.2960

.2965

.2969

.2975

.3115

.3120

.3125

.3130

.3135

.3275

.3281

.3285

.3430

.3435

.3438

.3445

.3590

.3594

.3600

.3730

.3735

.3740

.3745

.3750

.3755

.3760

.3900

.3906

.3910

.4060

.4062

.4070

.4210

.4219

.4225

.4365

.4370

.4375

.4380

.4525

.4531

.4540

.4680

.4688

.4695

.4840

.4844

.4850

.4980

.4985

.4990

.4995

.5000

.5005

.5010


made from

104SPECIAL SIZES AVAILABLE ON REQUEST

6

6

6

6

6

6

6

6

6

6

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

3/8

3/8

3/8

3/8

1/2

1/2

1/2

1/2

1/2

5/8

5/8

5/8

5/8

5/8

5/8

5/8

7/8

7/8

7/8

7/8

7/8

7/8

7/8

7/8

7/8

1"

1"

1"

1"

1"

1"

1"

1"

1"

1"

1"

1"

1"

1"

1"

1"

1"

1"

1-1/8"

1-1/8"

1-1/8"

1-1/8"

1-1/8"

1-1/8"

1-1/8"

1-1/8"

1-1/8"

1-1/8"

CARBIDE REAMERS

CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL


FLAT BOTTOM CENTER CUTTING15° RIGHT HAND HELIX, RIGHT HAND CUT

APPLICATION :1. SPOTTING ON IRREGULAR OR ROUND SURFACES2. COUNTER BORING3. FLAT BOTTOM REAMING4. STRAIGHTENING MISALIGNED OR OUT OF ROUND HOLES

3/32

1/8

9/64

5/32

11/64

3/16

13/64

7/32

15/64

1/4

17/64

9/32

19/64

5/16

21/64

11/32

23/64

3/8

25/64

13/32

27/64

7/16

29/64

15/32

31/64

1/2

33/64

17/32

35/64

9/16

37/64

19/32

39/64

5/8

41/64

21/32

43/64

11/16

45/64

23/32

47/64

3/4

85-0941

85-1251

85-1401

85-1561

85-1711

85-1871

85-2031

85-2191

85-2341

85-2501

85-2651

85-2811

85-2971

85-3121

85-3281

85-3431

85-3591

85-3751

85-3901

85-4061

85-4211

85-4371

85-4531

85-4691

85-4841

85-5001

85-5151

85-5311

85-5471

85-5621

85-5781

85-5941

85-6091

85-6251

85-6411

85-6561

85-6721

85-6871

85-7031

85-7191

85-7341

85-7501

3/8

3/8

1/2

1/2

1/2

1/2

5/8

5/8

5/8

5/8

11/16

11/16

11/16

11/16

3/4

3/4

3/4

3/4

7/8

7/8

7/8

7/8

1”

1”

1”

1”

1-1/8

1-1/8

1-1/8

1-1/8

1-3/16

1-3/16

1-3/16

1-3/16

1-1/4

1-1/4

1-1/4

1-1/4

1-1/2

1-1/2

1-1/2

1-1/2

2”

2”

2-1/2

2-1/2

2-1/2

2-1/2

2-1/2

2-1/2

2-1/2

2-1/2

2-1/2

2-1/2

2-1/2

2-1/2

2-1/2

2-1/2

2-1/2

2-1/2

3”

3”

3”

3”

3”

3”

3”

3”

3”

3”

3”

3”

3-1/2

3-1/2

3-1/2

3-1/2

4”

4”

4”

4”

4”

4”

4”

4”

1/8

1/8

3/16

3/16

3/16

3/16

1/4

1/4

1/4

1/4

5/16

5/16

5/16

5/16

3/8

3/8

3/8

3/8

7/16

7/16

7/16

7/16

1/2

1/2

1/2

1/2

9/16

9/16

9/16

9/16

5/8

5/8

5/8

5/8

3/4

3/4

3/4

3/4

3/4

3/4

3/4

3/4

SHANKDIAMETER

LENGTH OF FLUTE

OVERALL LENGTH

EDPNUMBER

FLAT BOTTOM ANDCENTER CUTTING.CIRCLE GROUND ONOUTSIDE DIAMETER.WILL NOT CUT SIDEWAYS.


.094

.125

.140

.156

.171

.187

.203

.219

.234

.250

.265

.281

.297

.312

.328

.343

.359

.375

.390

.406

.421

.437

.453

.469

.484

.500

.515

.531

.547

.562

.578

.594

.609

.625

.641

.656

.672

.687

.703

.719

.734

.750

DIAMETER +.000 / - .001

SERIES 85

N/C COUNTERBORES

THESE COUNTERBORES AREDESIGNED FOR USE ON A CNCTHEY DONT HAVE A PILOTOR A PILOT HOLE.

ITI CARBIDE

OVERALL LENGTH

LENGTH OF FLUTE

SHANK DIAMETER

DIAMETER

FLAT BOTTOMCENTER CUTTING

N/C COUNTERBORES


made from

105

INTERNAL TOOL


TA

LO

G F

OU

RT

EE

N

CUTTING

DIAMETER

OVERALL

LENGTH

# OF

FLUTES

SHANK

SIZE

ORDER

EDP #DESCRIPTION

LENGTH

OF CUTRADIUS

SERIES 136

HIGH PERFORMANCEENDMILL


1/8

1/8

5/32

5/32

3/16

3/16

3/16

7/32

7/32

1/4

1/4

1/4

9/32

9/32

5/16

5/16

5/16

11/32

11/32

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

7/16

7/16

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/8

1/8

3/16

3/16

3/16

3/16

3/16

1/4

1/4

1/4

1/4

1/4

5/16

5/16

5/16

5/16

5/16

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

3/8

7/16

7/16

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1-1/2

1-1/2

2"

2"

1-1/2

2"

2"

2"

2-1/2

2"

2-1/2

2-1/2

2"

2-1/2

2"

2-1/2

2-1/2

2-1/2

2-1/2

2"

2"

2-1/2

2-1/2

2-1/2

3"

3"

4"

4"

2-1/2

2-3/4

2-1/2

2-1/2

2-1/2

2-1/2

2-1/2

2-1/2

2-1/2

1/4

1/2

5/16

9/16

5/16

9/16

9/16

1/2

3/4

1/2

3/4

3/4

1/2

3/4

1/2

13/16

13/16

9/16

7/8

9/16

9/16

1"

1"

1"

1-1/4

1-1/4

1-1/2

1-1/2

9/16

1"

5/8

5/8

5/8

5/8

5/8

5/8

5/8

0.010

0.010

0.010

0.010

0.010

0.010

0.020

0.015

0.015

0.015

0.015

0.030

0.015

0.015

0.015

0.015

0.030

0.015

0.015

0.015

0.030

0.015

0.030

0.062

0.015

0.030

0.015

0.030

0.015

0.015

0.010

0.015

0.030

0.045

0.062

0.094

0.125

3

3

3

3

3

3

3

3

3

3

3

3

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

.125x.250x.010R

.125x.500x.010R

.156x.312x.010R

.156x.562x.010R

.187x.312x.010R

.187x.562x.010R

.187x.562x.020R

.218x.500x.015R

.218x.750x.015R

.250x.500x.015R

.250x.750x.015R

.250x.750x.030R

.281x.500x.015R

.281x.750x.015R

.312x.500x.015R

.312x.812x.015R

.312x.812x.030R

.343x.562x.015R

.343x.875x.015R

.375x.562x.015R

.375x.562x.030R

.375x1.00x.015R

.375x1.00x.030R

.375x1.00x.062R

.375x1.250x.015R

.375x1.250x.030R

.375x1.500x.015R

.375x1.500x.030R

.437x.562x.015R

.437x1.00x.015R

.500x.625x.010R

.500x.625x.015R

.500x.625x.030R

.500x.6250x.045R

.500x.625x.062R

.500x.625x.094R

.500x.625x.125R

136-1000

136-1010

136-1020

136-1030

136-1040

136-1050

136-1060

136-1070

136-1080

136-1090

136-1100

136-1110

136-1140

136-1150

136-1160

136-1180

136-1190

136-1220

136-1230

136-1240

136-1250

136-1270

136-1280

136-1290

136-1310

136-1320

136-1340

136-1350

136-1400

136-1420

136-1470

136-1480

136-1490

136-1500

136-1510

136-1520

136-1530

106

ALL TOOLS ARE ALTIN COATED

HIGH PERFORMANCE ENDMILLS

FOR HARD TO MACHINE MATERIALS


LENGTH OF CUT

SHANK DIAMETER

RADIUS

OVERALL LENGTH

FEATURES:

-45° HELIX VARIABLE PITCH-FULL ECCENTRIC RELIEF- ALTIN COATING FOR LONG TOOL LIFE-FOR CUTTING HARD TO MACHINE MATERIALS-AVAILABLE IN MULTIPLE RADIUS SIZES-CHATTER FREE CUTTING

CONTINUED ON NEXT PAGE

CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL


SERIES 136

HIGH PERFORMANCE ENDMILLSITI CARBIDEmade from ALL TOOLS ARE ALTIN COATED


LENGTH OF CUT

SHANK DIAMETER

RADIUS

OVERALL LENGTH

CUTTING

DIAMETER

OVERALL

LENGTH

# OF

FLUTES

SHANK

SIZE

ORDER

EDP #DESCRIPTION

LENGTH

OF CUTRADIUS

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

5/8

5/8

5/8

5/8

5/8

3/4

3/4

3/4

3/4

3/4

1"

1"

1"

136-1540

136-1550

136-1560

136-1570

136-1580

136-1590

136-1610

136-1620

136-1640

136-1670

136-1680

136-1690

136-1720

136-1730

136-1750

136-1770

136-1780

136-1800

136-1820

136-1830

136-1850

136-1920

136-1940

136-1960

136-1980

136-2010

136-2170

136-2180

136-2190

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

5/8

5/8

5/8

5/8

5/8

3/4

3/4

3/4

3/4

3/4

1"

1"

1"

3"

3"

3"

3"

3"

3"

3"

3"

3"

4"

4"

4"

4"

4"

4"

4"

3"

3"

3-1/2

3-1/2

3-1/2

3"

3"

3"

4"

4"

4"

4"

4"

1"

1"

1"

1"

1"

1"

1-1/4

1-1/4

1-1/4

1-1/2

1-1/2

1-1/2

2"

2"

2"

2"

3/4

3/4

1-5/8

1-5/8

1-5/8

7/8

7/8

7/8

1-5/8

1-5/8

1-1/4

1-1/4

1-1/4

0.015

0.030

0.045

0.062

0.094

0.125

0.015

0.030

0.062

0.015

0.030

0.062

0.015

0.030

0.062

0.125

0.062

0.125

0.030

0.062

0.125

0.030

0.062

0.125

0.030

0.062

0.030

0.062

0.125

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

5

.500x1.00x.015R

.500x1.00x.030R

.500x1.00x.045R

.500x1.00x.062R

.500x1.00x.094R

.500x1.00x.125R

.500x1.25x.015R

.500x1.25x.030R

.500x1.25x.062R

.500x1.500x.015R

.500x1.500x.030R

.500x1.500x.062R

.500x2.00x.015R

.500x2.00x.030R

.500x2.00x.062R

.500x2.00x.125R

.625x.750x.062R

.625x.750x.125R

.625x1.625x.030R

.625x1.625x.062R

.625x1.625x.125R

.750x.875x.030R

.750x.875x.062R

.750x.875x.125R

.750x1.625x.030R

.750x1.625x.062R

1.00x1.25x.030R

1.00x1.25x.062R

1.00x1.25x.125R

HIGH PERFORMANCEENDMILL FOR HARD TO MACHINE MATERIALS

FEATURES:

-45° HELIX VARIABLE PITCH-FULL ECCENTRIC RELIEF- ALTIN COATING FOR LONG TOOL LIFE-FOR CUTTING HARD TO MACHINE MATERIALS-AVAILABLE IN MULTIPLE RADIUS SIZES-CHATTER FREE CUTTING


HP USER

Rectangle

HP USER

Text Box

missouricarbide.com

INTERNAL TOOL


TA

LO

G F

OU

RT

EE

N

CUTTING

DIAMETER

OVERALL

LENGTH

SHANK

SIZE

ORDER

EDP #

LENGTH

OF CUTDESCRIPTION

3/16

3/16

1/4

1/4

5/16

5/16

3/8

3/8

7/16

7/16

1/2

1/2

1/2

1/2

5/8

5/8

3/4

3/4

1"

3/16

3/16

1/4

1/4

5/16

5/16

3/8

3/8

7/16

7/16

1/2

1/2

1/2

1/2

5/8

5/8

3/4

3/4

1"

1-1/2

2"

2"

2-1/2

2"

2-1/2

2"

2-1/2

2-1/2

2-3/4

2-1/2

3"

3"

4"

3"

3-1/2

3"

4"

4"

3/8

9/16

1/2

3/4

1/2

13/16

1/2

7/8

5/8

1"

5/8

1"

1-1/4

1-1/2

3/4

1-1/4

1"

1-1/2

1-1/2

.187x.375

.187x.562

.250x.500

.250x.750

.312x.500

.312x.812

.375x.500

.375x.875

.437x.625

.437x1.000

.500x.625

.500x.1.000

.500x1.250

.500x1.500

.625x.750

.625x1.250

.750x1.000

.750x1.500

1.000x1.500

116-1000

116-1005

116-1010

116-1015

116-1020

116-1025

116-1030

116-1035

116-1040

116-1045

116-1050

116-1055

116-1060

116-1065

116-1070

116-1075

116-1080

116-1085

116-1090

SERIES 112

HIGH PERFORMANCEROUGHING ENDMILLS

SERIES 116

HIGH PERFORMANCEBALL ENDMILLS

CUTTING

DIAMETER

OVERALL

LENGTH

SHANK

SIZE

ORDER

EDP #DESCRIPTIONLENGTH

OF CUTRADIUS

1/4

1/4

5/16

3/8

3/8

7/16

7/16

1/2

1/2

1/2

5/8

5/8

3/4

3/4

1"

1"

1/4

1/4

5/16

3/8

3/8

7/16

7/16

1/2

1/2

1/2

5/8

5/8

3/4

3/4

1'

1"

2-1/2

3"

2-1/2

2-1/2

3"

2-3/4

4"

3"

4"

4"

3-1/2

5"

4"

5"

4"

6"

3/4

1-1/8

13/16

1"

1-1/4

1"

2'

1-1/4

1-1/2

2"

1-5/8

2-1/4

1-5/8

2-1/4

2"

3"

0.015

0.015

0.015

0.015

0.015

0.015

0.015

0.030

0.030

0.030

0.030

0.030

0.030

0.030

0.030

0.030

.250x.750x.015R

.250x1.125x.015R

.312x.812x.015R

.375x1.000x.015R

.375x1.250x.015R

.437x1.000x.015R

.437x2.000x.015R

.500x1.250x.030R

.500x1.500x.030R

.500x2.000x.030R

.625x1.625x.030R

.625x2.250x.030R

.750x1.625x.030R

.750x2.250x.030R

1.000x2.000x.030R

1.000x3.000x.030R

112-1000

112-1005

112-1010

112-1015

112-1020

112-1025

112-1030

112-1035

112-1040

112-1045

112-1050

112-1055

112-1060

112-1065

112-1070

112-1075

108


ITI CARBIDE: PREMIUM SUBMICRON GRADE CARBIDE

ALTIN COATED FOR LONG LIFE

ALTIN COATED FOR LONG LIFE4 FLUTE

APPLICATION: Roughing or finishingSteel & Stainless Alloys

APPLICATION: Roughing Steel &Stainless Alloys

• 3 Flute• Corner Radius• Variable Pitch• Chip breakers• 50 ° Helix Angle

• 4 Flute• Ball Nose• Variable Pitch• 45 ° Helix Angle



CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL


CUTTING

DIAMETER

OVERALL

LENGTH

SHANK

SIZE

ORDER

EDP #LENGTH

OF CUTDESCRIPTION

HIGH PERFORMANCEALUMINUM CUTTINGENDMILLS

SERIES 126

3/8

9/16

1/2

3/4

1/2

3/4

1-1/4

1-1/2

9/16

13/16

1/2

13/16

1-1/4

5/8

1"

1-1/4

1-1/2

2"

5/8

1"

2"

5/8

1"

1-1/4

1-1/2

2"

3"

3/4

1-5/8

2-1/4

1"

1-5/8

2-1/4

3"

1-1/2

2-1/4

3"

2"

2"

2"

2-1/2

2"

2-1/2

3"

4"

2"

2-1/2

2"

2-1/2

3"

2"

2-1/2

3"

4"

4"

2-1/2

2-3/4

4"

2-1/2

3"

3"

4"

4"

6"

3"

3-1/2

5"

3"

4"

5"

6"

4"

5"

6"

.1875x.375

.1875x.562

.218x.500

.218x.750

.250x.500

.250x.750

.250x1.250

.250x1.500

.281x.562

.281x.812

.312x.500

.312x.812

.312x.1.250

.375x.625

.375x1.000

.375x1.250

.375x1.500

.375x2.000

.437x.625

.437x1.000

.437x2.000

.500x.625

.500x1.000

.500x1.250

.500x1.500

.500x2.000

.500x3.000

.625x.750

.625x.1.625

.625x2.250

.750x1.000

.750x1.625

.750x2.250

.750x3.000

1.000x1.500

1.000x2.250

1.000x3.000

126-1000

126-1005

126-1010

126-1015

126-1020

126-1025

126-1030

126-1035

126-1040

126-1045

126-1050

126-1055

126-1060

126-1065

126-1070

126-1075

126-1080

126-1085

126-1090

126-1095

126-1100

126-1105

126-1110

126-1115

126-1120

126-1125

126-1130

126-1135

126-1140

126-1145

126-1150

126-1155

126-1160

126-1165

126-1170

126-1175

126-1180

109

3/16

3/16

1/4

1/4

1/4

1/4

1/4

1/4

5/16

5/16

5/16

5/16

5/16

3/8

3/8

3/8

3/8

3/8

7/16

7/16

7/16

1/2

1/2

1/2

1/2

1/2

1/2

5/8

5/8

5/8

3/4

3/4

3/4

3/4

1"

1"

1"

3/16

3/16

7/32

7/32

1/4

1/4

1/4

1/4

9/32

9/32

5/16

5/16

5/16

3/8

3/8

3/8

3/8

3/8

7/16

7/16

7/16

1/2

1/2

1/2

1/2

1/2

1/2

5/8

5/8

5/8

3/4

3/4

3/4

3/4

1"

1"

1"



ZIRCONIUM COATED FOR LONGER LIFEAND PREVENTS CHIPS STICKING TOTHE TOOL

3 FLUTE

APPLICATION: Roughing or finishingAluminum Alloys

• 3 Flute• Variable Pitch• 45 ° Helix Angle


INTERNAL TOOL


TA

LO

G F

OU

RT

EE

N

CARBIDE RODS


OVERALL

LENGTH

BLANK

DIA.

ORDER

EDP #

110

1"

1-1/4"

1-1/2"

2"

2-1/2"

2-3/4"

3"

4"

1"

1-1/4"

1-1/2"

2"

2-1/2"

2-3/4"

3"

4"

1"

1-1/4"

1-1/2"

2"

2-1/2"

2-3/4"

3"

4"

6"

1"

1-1/4"

1-1/2"

2"

2-1/2"

2-3/4"

3"

4"

6"

1"

1-1/4"

1-1/2"

2"

2-1/2"

2-3/4"

3"

4"

6"

1/8

3/16

1/4

5/16

3/8

OVERALL

LENGTHBLANK

DIA.

ORDER

EDP #

1"

1-1/4"

1-1/2"

2"

2-1/2"

2-3/4"

3"

4"

6"

12"

1"

1-1/4"

1-1/2"

2"

2-1/2"

2-3/4"

3"

4"

6"

12"

1"

1-1/4"

1-1/2"

2"

2-1/2"

2-3/4"

3"

4"

6"

12"

1"

1-1/4"

1-1/2"

2"

2-1/2"

2-3/4"

3"

4"

6"

12"

1/2

5/8

3/4

1"

200-1430

200-1440

200-1450

200-1460

200-1470

200-1480

200-1490

200-1500

200-1510

200-1520

200-1530

200-1540

200-1550

200-1560

200-1570

200-1580

200-1590

200-1600

200-1610

200-1620

200-1630

200-1640

200-1650

200-1660

200-1670

200-1680

200-1690

200-1700

200-1710

200-1720

200-1730

200-1740

200-1750

200-1760

200-1770

200-1780

200-1790

200-1800

200-1810

200-1820

200-1000

200-1010

200-1020

200-1030

200-1040

200-1050

200-1060

200-1070

200-1080

200-1090

200-1100

200-1110

200-1120

200-1130

200-1140

200-1150

200-1160

200-1170

200-1180

200-1190

200-1200

200-1210

200-1220

200-1230

200-1240

200-1250

200-1260

200-1270

200-1280

200-1290

200-1300

200-1310

200-1320

200-1330

200-1340

200-1350

200-1360

200-1370

200-1380

200-1390

200-1400

200-1410

200-1420

CARBIDE RODS


CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL


CARBIDE RODS WITH FLATS


111

OVERALL

LENGTH

BLANK

DIA.

ORDER

EDP #

1"

1-1/4"

1-1/2"

2"

2-1/2"

2-3/4"

3"

4"

1"

1-1/4"

1-1/2"

2"

2-1/2"

2-3/4"

3"

4"

1"

1-1/4"

1-1/2"

2"

2-1/2"

2-3/4"

3"

4"

6"

1"

1-1/4"

1-1/2"

2"

2-1/2"

2-3/4"

3"

4"

6"

1"

1-1/4"

1-1/2"

2"

2-1/2"

2-3/4"

3"

4"

6"

1/8

3/16

1/4

5/16

3/8

OVERALL

LENGTHBLANK

DIA.

ORDER

EDP #

1"

1-1/4"

1-1/2"

2"

2-1/2"

2-3/4"

3"

4"

6"

12"

1"

1-1/4"

1-1/2"

2"

2-1/2"

2-3/4"

3"

4"

6"

12"

1"

1-1/4"

1-1/2"

2"

2-1/2"

2-3/4"

3"

4"

6"

12"

1"

1-1/4"

1-1/2"

2"

2-1/2"

2-3/4"

3"

4"

6"

12"

1/2

5/8

3/4

1"

210-2260

210-2270

210-2280

210-2290

210-2300

210-2310

210-2320

210-2330

210-2340

210-2350

210-2360

210-2370

210-2380

210-2390

210-2400

210-2410

210-2420

210-2430

210-2440

210-2450

210-2460

210-2470

210-2480

210-2490

210-2500

210-2510

210-2520

210-2530

210-2540

210-2550

210-2560

210-2570

210-2580

210-2590

210-2600

210-2610

210-2620

210-2630

210-2640

210-2650

210-1830

210-1840

210-1850

210-1860

210-1870

210-1880

210-1890

210-1900

210-1910

210-1920

210-1930

210-1940

210-1950

210-1960

210-1970

210-1980

210-1990

210-2000

210-2010

210-2020

210-2030

210-2040

210-2050

210-2060

210-2070

210-2080

210-2090

210-2100

210-2110

210-2120

210-2130

210-2140

210-2150

210-2160

210-2170

210-2180

210-2190

210-2200

210-2210

210-2220

210-2230

210-2240

210-2250

CARBIDE RODS


INTERNAL TOOL


TA

LO

G F

OU

RT

EE

N

SPEEDS AND FEEDS FOR CARBIDE ENDMILLS

ALUMINUM / ALUMINUM ALLOYS

BRASS / SOFT BRONZE

BRONZE / HIGH TENSILE

COPPER / COPPER ALLOYS

IRON-CAST (SOFT)

IRON-CAST (HARD)

IRON-DUCTILE

IRON MALLEABLE

MAGNESIUM / MAGNESIUM ALLOYS

MOLYBDENUM

MONEL / HIGH NICKEL STEEL

NICKEL BASE HI-TEMP ALLOYS

PLASTICS

PLASTICS-GLASS FILLED

REFRACTORY ALLOYS

STEEL-LOW CARBON

STEEL-MEDIUM CARBON

STEEL-UP TO Rc35

STEEL-Rc35 - Rc50

STEEL-Rc50 - Rc60

STEEL-MOLD

STEEL-TOOL

STAINLESS STEEL-SOFT

STAINLESS STEEL-HARD

TITANIUM-SOFT

TITANIUM-HARD

SPEEDSURFACE FEET

PER MINUTE

ENDMILL DIAMETER FEED PER TOOTH (INCHES)

MATERIAL UP TO 1/4" UP TO 1/2" UP TO 1"

600-1300

400-700

250-400

350-900

200-500

100-450

80-400

250-600

800-1400

800-1100

150-300

20-130

600-1200

300-800

80-400

250-550

100-250

150-250

80-150

25-120

200-350

100-300

250-400

50-250

120-350

30-150

.0002 - .002

.0005 - .002

.001 - .002

.0005 - .002

.0005 - .002

.0003 - .001

.0002 - .001

.001 - .002

.0005 - .002

.001 - .002

.0002 - .001

.0003 - .0008

.0006 - .003

.0006 - .003

.0002 - .001

.0002 - .001

.0004 - .0015

.0005 - .001

.0003 - .0007

.0002 - .0005

.0002 - .001

.0002 - .001

.0002 - .001

.0002 - .001

.0002 - .001

.0002 - .0005

.002 - .004

.002 - .003

.002 - .003

0.002

.002 - .003

.0008 - .002

.001 - .002

.001 - .003

.002 - .004

.002 - .004

.001 - .002

.0008 - .001

.003 - .006

.003 - .004

0.001

.001 - .003

.0015 - .002

.001 - .002

.0007 - .001

.0005 - .001

.001 - .002

.001 - .002

.001 - .002

.001 - .002

.001 - .002

.0005 - .001

.004 - .008

.003 - .005

.004 - .006

.002 - .006

.003 - .006

.003 - .005

.002 - .006

.003 - .008

.004 - .010

.004 - .008

.002 - .004

.001 - .002

.006 - .015

.004 - .012

.001 - .002

.003 - .007

.002 - .005

.002 - .003

.002 - .003

.001 - .003

.002 - .006

.002 - .006

.002 - .006

.001 - .005

.002 - .006

.001 - .004

PLUNGE OPERATIONS: REDUCE FEED PER TOOTH 50-65%SLOTTING APPLICATIONS: SURFACE SPEEDS (SFM) SHOULD BE REDUCED APPROXIMATELY 20% OF THE LOWEST VALUELIGHT RADIAL: DEPTHS OF CUT, THE HIGHER OF THE RECOMMENDED SURFACE SPEEDS (SFM) SHOULD BE USEDGREATER RADIAL: DEPTHS OF CUT (MORE THAN .5 X DIAMETER) THE LOWER RANGE OF SURFACE SPEEDS (SFM) SHOULD BE USEDAXIAL DEPTH OF CUT: RECOMMENDATIONS ARE NOT TO EXCEED 1-1/2 TIMES THE DIAMETER. IF THIS CONDITION EXISTS,

CONVENTIONAL MILLING SHOULD BE USED AND FEED PER TOOTH SHOULD BE REDUCED BY 50%

PLEASE NOTE: THE ABOVE RECOMMENDATIONS SHOULD BE CONSIDERED ONLY AS A STARTING POINT;"FINE TUNING" MAY BE REQUIRED IN ORDER TO MAXIMIZE PERFORMANCE

112

SPEEDS AND FEEDS

CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL


SPEEDS AND FEEDS

SPEEDS AND FEEDS FOR BORING TOOLS

MATERIAL

PLASTIC

MAGNESIUM

ALUMINUM

COPPER

BRASS

BRONZE

CAST IRON

STEEL

TITANIUM

STAINLESS

NICKEL

MONEL

INCONEL

WASPALOY

HASTELLOY

TYPE

TEFLON

NYLON

PHENOLIC

GLASS FILLED

AZ,AM,EZ,ZE,HK

2021 THRU 6061

101-707

834-978

GRAY

DUCTILE

MALLEABLE

1005-1029

1030-1055

1060-1095

10L45-10L50

12L13-12L15

41L30-41L50

4140-4150

4140 (35 HRC)

8617-8622

M1-M6

H10-H19

D2-D7

A2-A9, 01-07

W1, W2

M-50, 52100

TI-9AI-6V

201-385

405-446

15-5PH,16-6PH,14-4PH

NICKEL 200-230

SPEEDSURFACE FEET

PER MINUTE

INSERT BARSSERIES 16THRU 18

PAGE 45 THRU 48

DEPTH OF CUT

FEEDINCHES PER

REVOLUTION

SOLID CARBIDE BARS OUR SERIES 10

PAGE 2

TIN COATED SOLID CARBIDE BARS

OUR SERIES 11 PAGE 3

500-600700-800700-800700-800750-1500700-1400

600-800600-800

350-400

300-400

250-350250-350250-350

100-300100-300150-400300-500300-500200-400150-40090-125100-300150-250150-250150-250150-250150-250300-40090-250100-250100-250300-400

100-250

80-120

80-120

80-120

80-120

.003 - .006

.001 - .003

.001 - .003

.001 - .003

.005 - .012

.005 - .012

.003 - .005

.003 - .005

.001 - .003

.001 - .002

.004 - .010

.004 - .010

.004 - .010

.003 - .007

.003 -.007

.003 - .005

.004 - .006

.003 - .005

.003 - .005

.003 - .005

.001 - .004

.002 - .004

.003 - .008

.003 - .007

.004 - .010

.003 - .008

.003 - .008

.004 - .010

.001 - .003

.001 - .004

.001 - .004

.002 - .004

.002 - .005

.001 - .003

.001 - .003

.001 - .003

.001 - .003

.007

.007

.007

.005

.008

.008

.008

.008

.006

.006

.007

.007

.007

.007

.007

.007

.007

.007

.007

.007

.004

.007

.006

.006

.006

.006

.006

.007

.005

.005

.005

.005

.004

.004

.004

.004

.004

.012

.012

.012

.012

.012

.014

.014

.014

.011

.011

.007

.007

.007

.014

.014

.014

.014

.014

.014

.014

.007

.006

.005

.005

.005

.005

.006

.006

.008

.008

.008

.008

.007

.007

.007

.007

.007

.016

.016

.016

.016

.016

.018

.016

.016

.012

.012

.009

.009

.009

.016

.016

.016

.016

.016

.016

.016

.008

.007

.006

.006

.006

.006

.007

.007

.011

.012

.012

.012

.009

.009

.009

.009

.009

NOTE : ALL SPEEDS AND FEEDS LISTED HERE ARE PROVIDED FOR REFERENCE ONLY.

RPM=SFM X 12( ¶ ) X DIAMETER 113

INTERNAL TOOL


TA

LO

G F

OU

RT

EE

N

SPEEDS AND FEEDS

SPEEDS AND FEEDS FOR GROOVING TOOLS

MATERIAL

PLASTIC

MAGNESIUM

ALUMINUM

COPPER

BRASS

BRONZE

CAST IRON

STEEL

TITANIUM

STAINLESS

NICKEL

MONEL

INCONEL

WASPALOY

HASTELLOY

TYPE

TEFLON

NYLON

PHENOLIC

GLASS FILLED

AZ,AM,EZ,ZE,HK

2021 THRU 6061

101-707

834-978

GRAY

DUCTILE

MALLEABLE

1005-1029

1030-1055

1060-1095

10L45-10L50

12L13-12L15

41L30-41L50

4140-4150

4140 (35 HRc)

8617-8622

M1-M6

H10-H19

D2-D7

A2-A9, 01-07

W1, W2

M-50, 52100

TI-9AI-6V

201-385

405-446

15-5PH,16-6PH,14-4PH

NICKEL 200-230

SPEEDSURFACE FEET

PER MINUTE

FEED

SOLID CARBIDE OUR SERIES 20

PAGE 10

TIN COATED SOLID CARBIDE OUR SERIES 22

PAGE 11

350-400350-600500-600250-300850-1000900-1000

150-170500-600

200-250

200-250

120-35070-35075-550

250-450110-37090-250130-450550-60065-35065-400190-200100-400150-20065-250150-200150-250150-25060-30090-100200-280250-300100-200

200-250

100-150

40-50

70-100

70-90

.003 - .006

.001 - .003

.001 - .003

.001 - .003

.005 - .012

.005 - .012

.003 - .005

.003 - .005

.001 - .003

.001 - .002

.004 - .010

.004 - .010

.004 - .010

.003 - .007

.003 -.007

.003 - .005

.004 - .006

.003 - .005

.003 - .005

.003 - .005

.001 - .004

.002 - .004

.003 - .008

.003 - .007

.004 - .010

.003 - .008

.003 - .008

.004 - .010

.001 - .003

.001 - .004

.001 - .004

.002 - .004

.002 - .005

.001 - .003

.001 - .003

.001 - .003

.001 - .003

.007

.007

.007

.005

.008

.008

.008

.008

.006

.006

.007

.007

.007

.007

.007

.007

.007

.007

.007

.007

.004

.007

.006

.006

.006

.006

.006

.007

.005

.005

.005

.005

.004

.004

.004

.004

.004

.012

.012

.012

.012

.012

.014

.014

.014

.011

.011

.007

.007

.007

.014

.014

.014

.014

.014

.014

.014

.007

.006

.005

.005

.005

.005

.006

.006

.008

.008

.008

.008

.007

.007

.007

.007

.007

Inches perrevolution

CARBIDE INSERT OUR SERIES 26

PAGE 53

FEEDInches perrevolution


FEED


RPM=SFM X 12( ¶ ) X DIAMETER114

CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL


SPEEDS AND FEEDS

SPEEDS AND FEEDS FOR KEY CUTTERS

MATERIAL

PLASTIC

MAGNESIUM

ALUMINUM

COPPER

BRASS

BRONZE

CAST IRON

STEEL

TITANIUM

STAINLESS

NICKEL

MONEL

INCONEL

WASPALOY

HASTELLOY

TYPE

TEFLON

NYLON

PHENOLIC

GLASS FILLED

AZ,AM,EZ,ZE,HK

2021 THRU 6061

101-707

834-978

GRAY

DUCTILE

MALLEABLE

1005-1029

1030-1055

1060-1095

10L45-10L50

12L13-12L15

41L30-41L50

4140-4150

4140 (35 HRc)

8617-8622

M1-M6

H10-H19

D2-D7

A2-A9, 01-07

W1, W2

M-50, 52100

TI-9AI-6V

201-385

405-446

15-5PH,16-6PH,14-4PH

NICKEL 200-230

SPEEDSURFACE FEET

PER MINUTE

200200180150300300

100200

250

230

180140100

1801801701651601501401301201101009080706090100110120

80

80

80

80

80


FORMULA FOR COMPUTING TABLE SPEED IS.

.001 X NUMBER OF TEETH IN CUTTER X RPM

EXAMPLE CUTTING ALUMINUM WITH A 3/4" KEY CUTTER

.001 X 10 X 1600 = 16

MU

LTIP

LIER

NU

MB

ER O

F T

EETH

RPM

FORMULA FOR COMPUTING SPINDLE SPEED IS.

SURFACE FEET PER MINUTE FACTOR X 4 = ___

____ DIVIDED BY DIAMETER OF CUTTER =____RPM

EXAMPLE CUTTING ALUMINUM WITH A 3/4" KEY CUTTER 300 X 4 = 1200 divided by .750 = 1600 RPM

SUR

FAC

EFE

ET

CU

TTER

DIA

MET

ER

MU

LTIP

LIER

INC

HES

PER

MIN

UTE

?

?

115

INTERNAL TOOL


TA

LO

G F

OU

RT

EE

N

SPEEDS AND FEEDS

SPEEDS AND FEEDS FOR THREADING TOOLS

MATERIAL

PLASTIC

MAGNESIUM

ALUMINUM

COPPER

BRASS

BRONZE

CAST IRON

STEEL

TITANIUM

STAINLESS

NICKEL

TYPE

TEFLON

NYLON

PHENOLIC

GLASS FILLED

AZ,AM,EZ,ZE,HK

2021 THRU 6061

1005-1029

1030-1055

1060-1095

10L45-10L50

12L13-12L15

41L30-41L50

4140-4150

4140 (35 HRc)

8617-8622

M1-M6

H10-H19

D2-D7

A2-A9, 01-07

W1, W2

M-50, 52100

TI-9AI-6V

405-446

15-5PH,16-6PH,14-4PH

NICKEL 200-230

SPEEDSURFACE FEET

PER MINUTE

FEED

250-400250-400250-400250-400100-200100-200

100-200

200-300

200-30085-14050-15050-15050-15050-15050-15050-15050-15050-15050-15050-15050-15050-15050-15050-15050-15040-6565-10065-10040-100

.001

.001

.001

.001

.001

.001

.001

.001

.001

.0005

.001

.001

.001

.001

.001

.001

.001

.001

.001

.001

.001

.001

.001

.001

.001

.0005

.001

.001

.001

Infeed per pass 1st pass

FEEDInfeed per pass last pass

.015

.015

.015

.015

.020

.020

.010

.010

.010

.015

.015

.015

.015

.015

.015

.015

.015

.015

.015

.015

.015

.015

.015

.015

.015

.020

.015

.015

.015

SINGLE POINT THREADING ROUGHING INFEED DEPTH PER PASS

THREADS PER INCH

PASS 1

PASS 2

PASS 3

PASS 4

PASS 5

PASS 6

PASS 7

PASS 8

PASS 9

8.0171

.0283

.0372

.0449

.0517

.0580

.0637

.0691

.0742

10.0148

.0243

.0318

.0383

.0441

.0494

.0543

.0588

11.0148

.0243

.0318

.0383

.0441

.0494

.0543

.0588

12.0134

.0219

.0287

.0345

.0396

.0443

.0486

13.0124

.0202

.0264

.0317

.0364

.0407

.0447

14.0114

.0189

.0244

.0293

.0337

.0376

.0413

16.0110

.0179

.0233

.0279

.0321

.0358

18.0110

.0178

.0231

.0276

.0316

20.0099

.0159

.0206

.0246

.0282

24.0094

.0150

.0194

.0231

28.0079

.0126

.0163

.0194

32.0083

.0130

.0167

36.0072

.0113

.0145

40.0083

.0128

IN MOST CASES A FINISH OR SPRING PASS IS RECOMMENDED.

FORMULA FOR CONVERTING SURFACE FEET PER MINUTE (SFM) TO REVOLUTIONS PER MINUTE (RPM)


RPM=SFM X 12 ( ¶ ) X DIAMETER

116

CA

TA

LO

G F

OU

RT

EE

N

INTERNAL TOOL


SPEEDS AND FEEDS

SPEEDS AND FEEDS FOR FACE GROOVING

MATERIAL

PLASTIC

MAGNESIUM

ALUMINUM

COPPER

BRASS

BRONZE

CAST IRON

STEEL

TITANIUM

STAINLESS

NICKEL

MONEL

INCONEL

WASPALOY

HASTELLOY

TYPE

TEFLON

NYLON

PHENOLIC

GLASS FILLED

AZ,AM,EZ,ZE,HK

2021 THRU 6061

101-707

834-978

GRAY

DUCTILE

MALLEABLE

1005-1029

1030-1055

1060-1095

10L45-10L50

12L13-12L15

41L30-41L50

4140-4150

4140 (35 HRc)

8617-8622

M1-M6

H10-H19

D2-D7

A2-A9, 01-07

W1, W2

M-50, 52100

TI-9AI-6V

201-385

405-446

15-5PH,16-6PH,14-4PH

NICKEL 200-230

SPEEDSURFACE FEET

PER MINUTE

FEED

.003 - .006

.001 - .003

.001 - .003

.001 - .003

.001 - .002

.002 - .003

.002 - .003

.001 - .002

.001 - .002

.001 - .002

.002 - .003

.002 - .003

.002 - .003

.002 - .003

.001 -.003

.001 - .003

.002 - .003

.002 - .003

.002 - .003

.002 - .003

.001 - .003

.001 - .002

.001 - .002

.001 - .002

.001 - .002

.001 - .002

.001 - .002

.001 - .002

.001 - .002

.001 - .002

.001 - .002

.001 - .002

.001 - .002

.001 - .002

.001 - .002

.001 - .002

.001 - .002

NOTE : ALL SPEEDS AND FEEDS LISTED HERE AREPROVIDED FOR REFERENCE ONLY. RPM=SFM X 12 ( ¶ ) X DIAMETER


117

350-400350-600

500-600

250-300850-1000

900-1000

450-500

500-600

200-250

200-250

120-350

70-350

75-550

250-450

110-370

90-250130-450550-600

65-35065-400

190-200100-400150-200

65-250150-200

150-250

150-25060-30090-100

200-280

250-300100-200

200-250

100-150

40-50

70-100

70-90

INTERNAL TOOL


TA

LO

G F

OU

RT

EE

N

118

Any technical assistance or application suggestions made by Internal Tool, Inc. personnel areonly to assist the customer and in all cases use of such information is soley the customer'sresponsibility.

Technical Assistance

CALL FACTORY DIRECT ATPHONE 909-392-4700FAX 909-392-2627EMAIL [email protected] Tool Inc. 1338 Palomares Ave. LaVerne CA. 91750

Shipping TermsAll shipments are FOB Internal Tool, Inc. La Verne CA. unless otherwise specified. Normallyterms of payment on open accounts are 1% 10 NET 30 days from the date of invoice.

Net accounts are considered past due at 30 days from the date of invoice. Past due accountsare subject to shipment and production hold at the discretion of Internal Tool Inc. Internal Tool,Inc. reserves the right to place any past due account on hold until all past due invoices are paid.

Past Due Accounts

Return PolicyAny discrepancies in shipments recieved by you must be reported immediately. Suchmerchandise will not be accepted by us for return unless assigned a return authorization number.Any merchandise returned must be accompanied by a copy of our invoice indicating our returnauthorization number. Any merchandise that has been misused, abused, or is otherwise in non-saleable condition, will not be accepted for return by Internal tool, inc. Merchandise returned thatis found to be in compliance with the aforementioned policy will be refunded the full purchaseprice, subject to a reasonable restocking charge. Merchandise will not be accepted for returnafter 30 days from receipt.

Internal Tool, Inc. will not honor any credit that has not been expressly issued by Internal Tool,Inc. Any payments received that are found to be short paid for any reason without a credit issuedby Internal Tool,Inc. will be promptly returned to the customer. The customer will have theiraccount put on hold, or their shipping status changed to COD, at the discretion of Internal Tool,Inc. until the invoice has been cleared.

Credit Policy

Telephone OrdersTelephone orders are accepted at the risk of the purchaser and shipments made before receipt ofconfirmation are for the special convenience of the customer. Internal Tool Inc. is notresponsible for any shipping errors incurred as a result of a telephone order.

Special OrdersOrders for items marked as "specials" or items not stocked by Internal Tool, Inc. are consideredspecial orders. Special items are subject to minimum order quanities and/or special handlingcharges with allowable over/under-run of 10%. All special orders are non-cancelable and specialorders manufactured per print or instruction are non returnable.

Backordered ItemsAll Backordered items will be shipped in the same manner as the items on the original purchaseorder, unless specified in writing by the customer.

Shortage or ErrorAll claims for shortages or shipment error must be made immediately after receipt of shipment.invoice number and EDP number must be referenced. Our liability is limited to replacement ofmerchandise or refund of purchase price, at the discretion of Internal Tool Inc.

TERMS AND CONDITIONS


http://www.internaltool.com/

HP USER

Text Box

HP USER

Rectangle

HP USER

Text Box

Missouri Carbide Inc. 13965 Lawrence 2143 Mt. Vernon, MO 65712 Phone: (800) 430-3101 Fax: (417) 471-1037 missouricarbide.com [email protected]

INTERNAL TOOL

INTERNAL TOOL INC.

ALPHABETICAL INDEX

BORING TOOLSALUMINUM CUTTING BORING TOOLS - 1212121212BORE AND BACK CHAMFER TOOLS - 1313131313DOUBLE EDGE BORING TOOLS - 1313131313MAX-BORE ALTIN COATED - 1010101010MULTI REACH BORING TOOLS - 1111111111PLASTIC CUTTING BORING TOOLS - 1111111111QUICK CHANGE BORING TOOLS - 1212121212STANDARD BORING BAR - 8-98-98-98-98-9

COMBINATION TOOLSBORE AND GROOVE TOOLS - 1414141414BORE AND THREAD TOOLS - 1414141414DRILL AND BORING TOOLS - 1313131313THREAD AND GROOVE TOOLS - 2626262626

DOVETAIL CUTTERSO-RING DOVETAIL CUTTERS - 9292929292STANDARD DOVETAIL CUTTERS - 92-9592-9592-9592-9592-95DOVETAILCUTTER WITH A TIP RADIUS - 92-9592-9592-9592-9592-95

BACKSPOT FACERSCNC BACKSPOT FACER - 6060606060

DRILLSCARBIDE CENTER DRILLS - 5353535353CARBIDE COUNTERSINKS - 4747474747DRILL MILLS - 5050505050SPADE DRILLS - 5353535353SPOTTING DRILLS - 5353535353

ENDMILLSBACK DRAFT CUTTERS - 5555555555BACK DRAFT CUTTERS WITH RADIUS - 5555555555CARBIDE ENDMILLS - 5757575757CARBIDE REAMER - 104104104104104CHAMFER MILLS 2 OR 4 FLUTE, LONG OR SHORT, SINGLE OR DOUBLE - 62-6562-6562-6562-6562-65CORNER ROUNDING ENDMILLS - 66-6766-6766-6766-6766-67MICRO 2 FLUTE ENDMILLS - 5656565656MICRO ENDMILLS - 5757575757N/C COUNTERBORE - 105105105105105SMALL CARBIDE STUB TAPERED ENDMILLS - 5454545454STANDARD TAPERED CARBIDE ENDMILLS - 5454545454HIGH PERFORMANCE ENDMILLS - 108-109108-109108-109108-109108-109

ENGRAVING TOOLSCHISEL STYLE ENGRAVING TOOLS - 5959595959DOUBLE END ENGRAVING TOOLS - 5858585858EXTRA LONG ENGRAVING TOOLS - 5858585858FINE POINT ENGRAVING TOOLS - 5858585858RADIUS TIP ENGRAVING TOOLS - 5959595959SOFT MATERIAL ENGRAVING TOOLS - 5858585858SPIRAL FLUTE ENGRAVING TOOLS - 5959595959STANDARD ENGRAVING TOOLS - 5858585858TWO FLUTE ENGRAVING TOOLS - 5959595959

INSERT BARS11° DIAMOND BORING INSERT - 20-2120-2120-2120-2120-217° DIAMOND BORING BARS - 18-1918-1918-1918-1918-19DIAMOND BORING INSERT - 18-1918-1918-1918-1918-19GROOVING INSERT BARS - 3636363636GROOVING INSERTS - 3636363636INSERT BAR REPLACEMENT HEADS - 3737373737THREADING INSERT - 44-4644-4644-4644-4644-46THREADING INSERT BARS - 44-4644-4644-4644-4644-46TRIANGLE BORING BARS - 15-1715-1715-1715-1715-17TRIANGLE BORING INSERT - 15-1715-1715-1715-1715-17

KEYWAY CUTTERSCARBIDE HEAD 3/8" STEEL SHANK KEY CUTTERS - 8484848484CARBIDE HEAD KEY CUTTER W/ CORNER RADIUS - 8787878787CARBIDE HEAD STEEL SHANK KEY CUTTERS - 76-7976-7976-7976-7976-79DEEP SLOTTING KEYWAY CUTTERS SOLID CARBIDE - 7575757575FINE TOOTH CARBIDE HEAD KEY CUTTERS - 8181818181FULL RADIUS CARBIDE HEAD KEY CUTTERS - 8585858585FULL RADIUS SOLID CARBIDE KEY CUTTERS - 8585858585LARGE DIA KEYWAY CUTTERS CARBIDE HEAD - 8282828282METRIC HEAD STEEL SHANK KEY CUTTERS - 8080808080RETAINING RING CARBIDE KEY CUTTERS - 8383838383SOFT MATERIAL CARBIDE HEAD KEY CUTTERS - 7171717171SOFT MATERIAL SOLID CARBIDE KEY CUTTERS - 7070707070SOLID CARBIDE KEY CUTTER W/ CORNER RADIUS - 8686868686SOLID CARBIDE KEY CUTTERS - 72-7372-7372-7372-7372-73SOLID CARBIDE KEY CUTTERS 1/4" SHANK - 8484848484SOLID CARBIDE KEY CUTTERS LONG REACH - 7474747474SOLID CARBIDE KEY CUTTERS LONG SHANK - 8383838383STAGGERED TOOTH CARBIDE HEAD KEY CUTTERS - 8888888888

MOLD CUTTERSDIE SINKERS - 4747474747RUNNER CUTTER - 4747474747

THREADING TOOLSACME THREADING TOOLS - 4141414141BUTTRESS THREADING TOOLS - 4343434343EXTERNAL ACME THREADING TOOLS - 4141414141EXTERNAL STUB ACME THREADING TOOLS - 4141414141EXTERNAL THREAD/CHAMFER TOOLS - 3535353535LEFT HAND THREADING TOOLS - 4040404040METRIC THREADING TOOLS - 4343434343MULTI REACH THREADING TOOLS - 4242424242QUICK CHANGE THREADING TOOLS - 4242424242STANDARD THREADING TOOLS - 4040404040STUB ACME THREADING TOOLS - 4141414141

PROFILING TOOLSFINE POINT PROFILE TOOLS - 48-4948-4948-4948-4948-49L.H. OFFSET PROFILE TOOLS - 48-4948-4948-4948-4948-49MULTI REACH PROFILING TOOLS - 4848484848QUICK CHANGE PROFILING TOOLS - 4343434343R.H. OFFSET PROFILE TOOL - 48-4948-4948-4948-4948-49REVERSE PROFILE TOOLS - 48-4948-4948-4948-4948-49STANDARD PROFILE TOOLS - 48-4948-4948-4948-4948-49

SPECIALTY CUTTERSACME THREAD MILLS - 102-103102-103102-103102-103102-103ANGLERS - 9090909090CONCAVE RADIUS KEY CUTTERS - 9090909090DOUBLE ANGLE CUTTER - 98-9998-9998-9998-9998-99DOUBLE CHAMFER CUTTERS - 6161616161DOUBLE CONCAVE RADIUS CUTTERS - 9090909090EDGE BREAKERS - 6060606060MINI THREADMILLS - 100100100100100MULTI THREAD MILLS ALTIN COATED - 101101101101101REVERSE CORNER ROUNDING TOOLS - 6161616161SINGLE ANGLE CUTTER - 8383838383STUB ACME THREAD MILLS - 4141414141THREADMILLS - 100100100100100UNDERCUTTING ENDMILLS/LOLLI POP CUTTERS - 9797979797EXTERNAL ACME / STUB ACME THREAD MILLS - 102102102102102INTERNAL ACME / STUB ACME THREAD MILLS - 103103103103103

GROOVING TOOLSDEEP SLOTTING GROOVING TOOLS - 3232323232DEEP SLOTTING FULL RADIUS GROOVE TOOLS - 3333333333EXTERNAL GROOVING TOOLS - 3535353535FACE GROOVING TOOLS - 3939393939FULL RADIUS GROOVING TOOLS - 24-2524-2524-2524-2524-25I.D. CHAMFER TOOLS - 3535353535LONG LENGTH SINGLE END SPLIT BLANKS - 3838383838MAX-GROOVE ALTIN COATED - 28-2928-2928-2928-2928-29METRIC GROOVING TOOLS - 2727272727MULTI REACH GROOVING TOOLS - 2626262626O-RING DOVETAIL GROOVERS - 2727272727O-RING GROOVE TOOLS - 2626262626QUICK CHANGE GROOVING TOOLS - 30-3130-3130-3130-3130-31STANDARD GROOVING TOOLS - 22-2322-2322-2322-2322-23THREAD RELIEF TOOLS - 4242424242

HOLDERS/BUSHINGS/MISCDOUBLE END SPLIT BLANKS - 3838383838EXTERNAL BAR HOLDER - 3535353535FACE GROOVE TOOL HOLDER - 3939393939QUICK CHANGE HOLDER - 1212121212REPLACEMENT SCREW - 3737373737SINGLE END SPLIT BLANKS - 3838383838SPLIT BUSHING - 3838383838TOOL HOLDER - 1414141414

HP USER

Text Box

Missouri Carbide Inc 13965 Lawrence 2143 Mt. Vernon, MO 65712 Ph: (800) 430-3101 | Fax: (417) 471-1037 missouricarbide.com | email: [email protected]

internal tool - missouricarbide.com · internal tool internal tool inc. alphabetical index boring...

Documents