INTERNATIONAL CONFERENCE

ON P/'/i,^QUALITY CONTROL

PROCEEDINGS

1969

I- JCQC19-Myo%

ffiSsimm*

/USE

October 20-24,1969

TOKYO

Organaized and Sponsored by

THE UNION OF JAPANESE SCIENTISTS AND ENGINEERS

in cooperation with

AMERICAN SOCIETY FOR QUALITY CONTROL

EUROPEAN ORGANIZATION FOR QUALITY CONTROL

SESSION

Session 1 COMPANY-WIDE QUALITY CONTROL ACTIVITIES

01-01. " The New Total Quality Control in NEC "

Kunie YOSHIKAWA (Nippon Electric Co.) Japan 1

01-02. "

Dynamic Management Ball of'

Q'"Kojiro YAMAOKA (Yanmer Diesel Engine Co.) Japan 5

01-03."

Total Quality Control Concept Applied to the Industrial Management System."Takaharu MIZUNO (Toyota Motor Co.) Japan 9

01-04. "

Everyman's Responsibility for the Quality and Reliability of Manufactured Product"

Frank NIXON (Rolls-Royce Ltd.) United Kingdom 13

01-05. "Total Quality Control"

A. V. FEIGENBAUM (General Systems Co.) USA 17

01-06. "

Company-wide Quality Control Activities in Japan"

Shigeru MIZUNO (Tokyo Inst, of Tech.) Japan 21

01-07. " Le C6ntrole de Qualite est-il Contestataire? "

Georges BOREL & Valere CANTARELLI (AFCIQ) France 25

01-08. "

Company-wide Quality Control Audit"

Haruo HATA (Sumitomo Electric Industries Ltd.) Japan 29

01-09. "An Example of Quality Control Activities in Construction Equipment Manufacture"

Masaomi KAKU & Yohei KOGA (Komatsu Mfg. Co.) Japan 33

01-10."

Recent Development in Quality Control Activities of Japanese Steel Industry"

Keiji TSUJIHATA (The Japan Inst, of Iron & Steel) Japan 37

01-11. "Management's Concept and Aims of Total Quality Control"

Sitaram JAIPURIA (Swadeshi Cotton Mills Co.) India 41

01-12. "

Concept of Total Quality Control "

Shabbir AHMED (Ajax Jute Mills Ltd.) India 43

01-13. "Systems Engineering and Management: A New Challenge and Approach for Total

Quality Control"

Lee R. WEBSTER (Radiation, Inc.) USA 47

01-14. "Management is Responsible for Defects"

Vernon L. WALKER (OMARK Industries, Inc.) USA 51

01-15. "Experiences in Quality Control Activities"

Heiji IKEGAMI (Nippon Kokan K.K.) Japan 53

Session 2 QUALITY SYSTEM AND ITS ADMINISTRATION

02-01. "Systems Engineering New Frontier for Quality Control and Reliability"Donald S. FEIGENBAUM (General Systems Co.) USA 59

02-02." Some Total System Aspects of Quality Control"

Fujio UMIBE (Tokyo Shibaura Electric Co.) Japan 63

02-03. "

Design and Improvement of Quality Control System by System Approach"

Masao AKIBA (Tokyo Metropolitan Tech. Coll.)

Tadayoshi OOKA & Akikazu YAMADA (Matsushita Elec. Ind. Co.) Japan 67

02-04. " Measurement and Evaluation of Quality Systems"

Richard C. CALAHAN (The Singer Co.) USA 71

V

TECHNICAL SESSION

02-05."

Quality Information Equipment Engineering"

E- J- LANCASTER (Lockheed Missiles & Space Co.)02-06.

"Effective Information Systems for Quality Control "

Akira DOI, Hideyoshi TSUBONO & Eiichi ISHH (Shinko Wire Co.)02-07. "

Quality is Good - - - But"

John L. HERRMANN (The Dow Chemical Co.)02-08. "The Continuous Product Quality Audit"

Hardy M. COOK, Jr. (Western Electric Co.)

USA 75.

Japan 79

USA *

USA 83

02-09."

Quality Management in the Medium/Large Engineering Company'G- A- G- SAYWELL (The Hoffman Manufacturing Co.)

02-10. "Role of Standardization of Quality Control"

V. V. BOITSOV (The Committee for Standards)02-11. "Check List for Company Standardization"

Masanori KOYAMA (Japanese Standards Assoc.)

United Kingdom 87

USSR *

Japan 91

02-12. "

Quality Levels, Characteristic Requirements Testing Systems and Their Problems

in the Standardization "

Paul TAKACS (Hungarian Office for Standardization)02-13.

"

Project Ranking by ABCD-Method "

Takeshi SUZUKI (Science Univ. of Tokyo)02-14. "Analytical Study on New Product Development System

"

Kozo KOURA (Nippon Kayaku Co.)

Hungary 95

Japan 99

Japan 103

02-15." PESIC System (A New Product R&D System)

"

Mititaka YAMAMOTO (Omron Tateisi Electronics Co.) Japan 107

02-16."On Some Computer Methods for System Reliability Evaluation "

Orlino C. BALDONADO (Holmes & Narver, Inc.) USA 111

02-17."

On Data Collecting and Analyzing System of Quality Information G-DAS JI"

Kunio TSUBOI (Nippon Kokan K.K.) Japan 115

02-18. " On the Design of Optimum Quality and the Determination of Production Schedules

by Computers"

Keisuke MORI (Fuji Iron & Steel Co.) Japan 119

02-19. "Establishment of Management Planning System 'KOMPBS'"

Yoshimitsu KURIKI, Yoshiaki YOSHIDA, Shojun NAKASHIMA &

Yoshiki TAKATSU (Kobe Steel, Ltd.)

02-20. "

Organization for Developing Engineering Staffs "

Hideo MIWA (Aisin Seiki Co.)

02-21. "

Sakya-muni and O-sakya Synonym"

Ichiro MIYAUCHI (Ishikawajima-Harima Heavy Ind. Co.)

02-22."

Organizing for Quality in Fabrics "

S. Y. NANAL & Maruthi RAO (Mafatlal Group of Mills)

Japan 123

Japan 127

Japan 131

India 135

Session 3 MARKETING, QUALITY PLANNING AND

NEW PRODUCTS DEVELOPMENT

03-01."The Development of High Tensile Steel and Its Production Control in Yawata Area Works "

Koichi AOKI (Yawata Iron & Steel Co.) Japan 141

03-02. "Quality Planning for Sounding Rocket"

Hisao SHOBAYASHI (Nissan Motor Co.) Japan 145

03-03."

Production of Windshield for Aircraft"

Hiroshi KAKIHARA (Nippon Sheet Glass Co.) Japan 149

VI

SESSION

03-04. "Initial Control Activities for Quality Assurance of New Product (Corona Mark II

as an Example)"Koichi TANAKA (Toyota Motor Co.) Japan 153

03-05."

The Need for Product Support"

W. MARSH (Rolls-Royce, Ltd.)United Kingdom 157

03-06. "

Quality and Income"

J. M. JURAN (Consultant)USA 161

03-07. "

Development of New Products: Method of Extending Products' Life Cycle by

Additional Variations"

Masaaki SEGAWA (Teijin, Ltd.) Japan 165

03-08." V/STOL Leads to Quality Improvment for Turbo-jet Engines: The Rolls-Royce Pegasus,

First of a New Generation"

P. J. RYMAN (Rolls-Royce, Ltd.) United Kingdom 169

03-09. "Quality Evaluation at Job Shop Production"

Masaharu KURATA & Satoshi ARAKI (Mitsubishi Elec. Corp.) Japan 173

03-10. "An Operations Research Model for Optimal Product Quality and Price in

Competitive Marketing"

Melvin F. SHAKUN & Samprit CHATTERJEE (New York Univ.) USA 177

03-11. "A Market Survey to Find Product Value"

Vernon L. WALKER (OMARK Industries, Inc.) USA 181

Session 4 QUALITY AND RELIABILITY ASSURANCE

THEORY AND METHODS OF RELIABILITY

04-01." Quality and Reliability Program Assurance

"

L. W. BALL (The Boeing Co.) USA 185

04-02."

Quality Assurance and Reliability Activities in Japan"

Tetsuichi ASAKA (University of Tokyo) Japan 189

04-03. "Optimum Test Procedure for Destructive and Non-destructive Testing,

Using Information Theory"

H. C. SHAH (Stanford University) & P. K. NIYOGI (Sacramento State College) USA 193

04-04." Some Reliability Aspects of Complex Systems

"

Hisashi MINE & Shunji OSAKI (Kyoto University) Japan 197

04-05. "On'Statistical Methods in the Theorv of Reliability"

Hajime MAKABE (Tokyo Inst, of Tech.) &

Yasuko KAMINUMA (Yokohama National University) Japan 201

04-06."Four Steps to a Reliable Conclusion

"

J. N. BERRETTONI (Case Western Reserve University) USA 205

RELIABILITY IN ELECTRIC, ELECTRONIC AND AUTOMOTIVE INDUSTRIES

04-07." Reliability Control of Household Electrical Appliances

"

Shinichi FUZIWARA (Mitsubishi Electric Corp.) Japan 207

04-08." Reliability Assurance of Electronic Components mainly for Consumer Products "

Hisashi TACHIKAWA & Nobuo TABE (Matsushita Electric Ind. Co.) Japan 211

04-09." Reliability of a Differential Ground Fault Circuit Interrupter

"

Guy A. GOETHNER & Robert M. MURPHY (Harvey Hubbell, Inc.) USA 215

1

TECHNICAL SESSION

04-10. "Actual Result of Equipment Reliability for the Solid State Microwave Communication System"

Takaji KURQDA & Shinjiro IKE (Nippon Electric Co.) Japan 21904-11. "

Reliability Prediction Technique and the Resulting Evaluation in a Telephone SwitchingSystem Composed mainly of Electromagnetic Components

"

Kazuya OZEKI, Kimizo SHIRABE, Akihiko MASUDA & Ryuichi AKINO

(Nippon Electric Co.) Japan 22304-12. "

Reliability Prediction of Medium Power Transistors Using Step Stress Test"

Kenji TAKAHASHI & Shoji ISHII (Tokyo Shibaura Electric Co.) Japan 22704-13. " The Importance of Length Measurement for the Assurance of Quality

in the Metal-Working Industry"

Harry TRUMPOLD (Technishe Hochschule) German, D. R. 231

04-14."

Recent '

Service-Free' Development in Automobile Chassis Components"

Hisato ARIMURA & Katsu MORIMOTO (Nissan Motor Co.) Japan 235

04-15. "On the Reliability Activity of Commercial Vehicle Engines "

Yuichi FUKUMA, Takashi SUZUKI & Takayuki SUZUKI

(Hino Motors, Ltd.) Japan 239

04-16."An Example of Quality Assurance Activities "

Yushichi TOMOTA, Kijii ISHIKAWA, Kohii KONDO & Kiyoshi WATANUKI

(Fuji Motors Corp.) Japan 249

Session 5 QUALITY AND ECONOMICS

05-01. "Quality Cost System and Its Development"

Teruo NAKAMURA (Nippon Kayaku Co.) Japan 253

05-02. "

Optimizing Cost-of-Ownership by Computer Simulation"

Clarence E. BOOTH, Jr. (Litton Guidance & Control Systems, Inc.) USA 257

05-03. "

Quality Costs Friend or Foe "

Daniel M. LUNDVALL (Westinghouse Electric Corp.) USA 261

05-04. "Preventive Costs" The Elusive Quality Cost

John Winslow HATHAWAY (OMARK Industries) USA 265

05-05."

Fundamental Problems in Quality Cost Analysis"

Tamio FUSHIMI (Keio University) Japan 269

05-06. "

Integrated Quality Cost Control "

John F. HIRD (Western Electric Co.) USA

05-07."

Quality Costs as a Guide to Management and Design of Automobile Components"

Joseph HARRIS (Smith Industries, Ltd.) United Kingdom 273

Session 6 PROCESS CONTROL

PROCESS CONTROL BY COMPUTER

06-01. "Quality Control of High Power Semiconductors by Computer"

Teijiro OHTSUKI (Mitsubishi Electric Corp.) Japan 279

06-02. "

Computerized Production Control System"

Yoshinobu TSUJIMOTO (Nippon Kokan K.K.) Japan 283

06-03."

Manufacturing Process Control by Computer"

Morris M. LIGHTSTONE (Chrysler Corp.) USA *

06-04."

On-line Computer is Controlling the Production of New Integrated KIMITSU Works"

Tsuguo MINE (Yawata Iron & Steel Co.) Japan 287

06-05."

Effectiveness of QC Cycle by Introducing EDP System in the Car Body Measurement"

Yasuji IKENO & Kenji SAWAMURA (Nissan Motor Co.) Japan 291

1

SESSION

QUALITY EVALUATION IN PROCESS

06-06." Evaluation of Qualitative Performances in Industrial Processes "

Umberto TURELLO (PIRRELLI S. p. A.) Italy 295

06-07. "The Role of the Operator and the Foreman in Controlling a Process"

Clyde H. WALDEN (Kaiser Aluminum & Chemical Corp.) USA 299

06-08. "

Gage Correlation Effectivenesses "

Kihachiro TAGUCHI (Ishikawajima-Harima Heavy Ind. Co.) Japan 303

SYSTEM DESIGN AND STATISTICAL TECHNIQUES FOR PROCESS CONTROL

06-09. "A Statistical Quality Control and Control Processes"

Toshio ODANAKA (Tokyo Metropolitan Tech. College)Haruo MIYAZAKI (Gunma Tech. College) Japan 307

06-10."

Control Characteristics of Control Charts "

Shigeru MIZUNO & Tokichi YURA (Tokyo Inst, of Tech.) Japan 311

06-11. "

Developments in the Theory of Process Control Plans "

S. P. MUKHERJEE (Calcutta University) India 315

06-12."

Design of Quality Control Systems during Production "

Genichi TAGUCHI (Aoyama Gakuin University) Japan 319

06-13. "A Graphical Method of Providing a Visual Presentation of the Capability of a Manufacturing

Process in Relation to Specification Requirements"

John S. JONES (Rolls-Royce, Ltd.) United Kingdom 323

Session 7 VENDOR-VENDEE RELATIONS

07-01."

Vendor-Vendee Relations"

Charles L. CARTER, Jr. (C. L. Carter, Jr. & Associates, Inc.) USA 329

07-02." Ten Principles for Vendee-Vendor Relations from the Standpoint of Quality Control"

Kaoru ISHIKAWA (University of Tokyo) Japan 333

07-03."

Obtaining Quality and Delivery Information on Subcontracted Parts through MACS and

Improving Subcontractor's Structures "

Kazutomi TAKEMOTO & Yukuo OTSURU (Toyo Kogyo Co.) Japan 337

07-04."

La Selection des Fournisseurs selon Criteres de la Qualite de Leurs Produits "

Maurice de LORRIS (AFCIQ) France *

07-05. "Acceptance Control System in TANABE"

Toshio MURAOKA, Takeshi MATSUBARA, Katsuya TOCHINO,

Setsuo NAKAGAMI & Masahiko ARITA (Tanabe Seiyaku Co.) Japan 341

07-06."

Supply Quality Assurance "

David F. MORRIS (Pollard Bearings, Ltd.) United Kingdom 345

07-07. "

Specification"

°- JONSON (SK-EOQC) Sweden 349

Session 8 HUMAN ASPECTS OF QUALITY CONTROL

MOTIVATIONAL PROGRAM AND "QC CIRCLE" ACTIVITIES

08-01. "

Operators Voluntary Check in Production as an Effective Quality Assurance System"

Yoshiro ARAKI, Riichi NITTO & Harukichi ISHIYAMA

(Mitsubishi Heavy Ind., Ltd.) Japan 355

K

TECHNICAL SESSION

08-02. " Human Aspect of Quality Control "

L. T. KARLE (Bharathi Coffe Curing Works)08-03. "

QC Group Activities in Total Quality Control System of Hitachi Totsuka Works"

Kihachi KOBAYASHI, Kohei YAMAUCHI, Makoto KIKUCHI,

Shinichi HOSHINO, Takashi KOUMURA & Nobuyoshi TSUTAGAWA (Hitachi, Ltd.) Japan

08-04." Statistical Control of Quality in Japan

"

W. E. DEMING (Consultant) USA

India 359

363

367

08-05. "Motivation Program in Manufacturing Division"

Ryunosuke TAKAO, Hideo OKANO & Hideo YAMAZAKI

(Sumitomo Electric Ind., Ltd.)08-06.

"How to Set Up an Effective Man-Hour Reduction System

"

Hideharu KANEDA & Kozo MAKISE (Kanto Auto Works, Ltd.)08-07.

"

Promoting QC Circle Activities "

Tomoji IWATA (Nippon Kokan K.K.) Japan

08-08. " The Present Situation and the Reconsideration of QC Circle Activities in Kobe Steel Ltd."

Kazuo HIROSE & Shinji FUNABIKI (Kobe Steel, Ltd.) Japan

Japan 371

Japan 375

379

383

08-09. " Technical Skill Evaluation System"

Tsuyoshi SABAO & Daizo NISHIYAMA (Toyota Auto Body Co.)

08-10. "

Promoting Quality Control Activities through Mutual Reliance "

Yoshio KONDO (Kyoto University)08-11. "Motivation for Perfection and Conservation of World Resources"

M. F. CHAPMAN (Kaiser Aerospace & Electronics Corp.)

Japan 387

Japan 391

USA 395

08-12.

08-13.

08-14.

"

Management Providing Hopeful Living"

Takeshi KAYANO (Matsushita Electric Industrial Co.)" Involvement of People

"

F. G. WILLEMZE (N. V. Philips)

"Participative Quality Control"

Sidney P. RUBINSTEIN (S. P. Rubinstein Associates)

Japan 399

Netherlands 403

USA 407

08-15. "Zero Defects in a Worldwide Corporation"

Philip B. CROSBY (Int'l Telephone & Telegraph Corp.)

08-16. "A Study of Evaluation of QC Circle Members "

Hsiu-shyong LIN (Chinese Society for QC)08-17.

"

QC Circle Activities in Japan"

Masumasa IMAIZUMI (QC Circle Headquartears)

USA 411

Rep. of China 415

Japan *

EDUCATION AND TRAINING OF QC

08-18. "Training of Line Operators through Self-Development"

Yukio INAGAKI, Satoru MIZUNO & Hiroyuki MATSUO

(Matsushita Electronics Corp.)

08-19."

Education and Training of Quality Control in Japanese Industry"

Kaoru ISHIKAWA (University of Tokyo)08-20. "A Practical Approach to Quality Education"

J. H. TESKE (Lockheed Missiles & Space Co.)

08-21."

Quality Control Course for Food Technologists"

Sonia Y. de LEON, Amelia L. KABIGTING &

Miflora M. GATCHAL1AN (Univ. of Philippines)

08-22. "Education for the Quality Professional in the Decade Ahead"

Walter L. HURD, Jr. (Lockheed Missiles & Space Co.)

Japan 419

Japan 423

USA 427

Philippines 431

USA 435

X

SESSION

SENSORY INSPECTION

08-23. "An Effective Sensory Quality Control in Food Industry"

Kohmei WANI (Snow Brand Milk Products Co.) Japan 439

08-24." The Application and Scalling of Panel's Descriminating Ability in Type-I Sensory Inspection

"

C. S. TSONG (CSQC) Rep. of China 443

08-25. "

Judgement Characteristic Curves and Selection of Panel Members in Sensory Tests"

Tarow INDOW (Keio University) Japan 447

08-26. "Quantification of Quality and Sensory Ability of Inspector

and It's Application On Visual Inspection Task"

Kageyu NORO & Takeshi KURABAYASHI (Keio University) Japan 451

Session 9 ADMINISTRATIVE APPLICATION OF QUALITY CONTROL

QUALITY PROMOTION IN DEVELOPING COUNTRY

09-01. "Assessment of Quality Programmes in Developing Countries "

SRINAGABHUSHANA & S. M. Sundara RAJU (Indian Statistical Institute) India 457

09-02. "System of the Realisation of Quality of the Active Enterprises in the New Economic

Reform in Hungary"

Gyozo Victor M6GA (United Incandescent Lamp & Elec. Co.) Hungary 461

QUALITY CONTROL IN ADMINISTRATIVE PROCESS

09-03. "Mulligan System"

Walter D. SCOTT (W. D. Scott & Co.) Australia 465

09-04."

Quality in Indirect Departments"

Yoji AKAO (Yamanashi University),Kazuo NISHINO & Junichi EGAWA (Victor Company of Japan, Ltd.) Japan 469

09-05. " How Retailers Assure the Quality of Products They Sell"

Robert W. PEACH (Sears, Roebuck & Co.) USA 473

QUALITY CONTROL IN PUBLIC UTILITIES

09-06. "Les Methodes de Contrdl de Qualite dans les Administrations Publiques Europeennes"

Maurice de LORRIS (AFCIQ) France 475

09-07."

Quality Control of Basic Data in United States Post Office Department

Statistical Programs"

Benjamin J. MANDEL (U. S. Post Office Department) USA 477

09-08."

Quality Control Methods in Hospital Work "

Newhouse T. MATHEW (Indian Statistical Institute) India 481

QUALITY CONTROL IN SMALL INDUSTRY

09-09."

Quality Control in Japanese Small-Scale Manufacturers"

Hidehiko HIGASHI (Japanese Standards Association) Japan 485

09-10." How to Promote the Creative Quality Control Activities

"

Tetsuhiko NISHIKAWA (Mitsumi Electric Co.) Japan 489

09-11." The Promotion of Company-wide Standardization and Its Results (A Case Presentation)"

Tatsuya TSUBOSAKA (Kyoei Industries Co.) Japan 493

09-12. "Operational Research Studies in the Business Services of Safdarjang Hospital"T. N. KUPPUSWAMI (Safdarjang Hospital) India 497

TECHNICAL SESSION

Session 10 APPLICATIONS OF STATISTICAL AND

ENGINEERING TECHNIQUES (Room E)

ADVANCED STATISTICAL TECHNIQUES

10-01."

On Some Considerations of Cusum Charts "

Masao KOGURE & Hajime MAKABE (Tokyo Inst, of Tech.) Japan 50310-02.

"

Robust Variables Control Charts Based on Sample Means "

John E. WALSH (Southern Methodist University) &

Grace J. KELLEHER (Inst, for Defense Analyses) USA 50710-03.

" A Review of Applications of Statistical Techniques "

Masao KOGURE (Tokyo Inst, of Tech.) Japan 51110-04.

"

Extensions of Fractile Graphical Analysis"

P. C. MAHALANOBIS (Indian Statistical Institute) India 515

DISTRIBUTION PROBLEMS

10-05. "Remarks on Maximum Likelihood Estimators for the Gamma Distribution"Kimiko O. BOWMAN (Union Carbide Corp.) &

L. R. SHENTON (University of Georgia) USA 51910-06. "A Potencially Universal Probablity Density Function for Scientists and Engineers

"

Joseph V. J. RAVENIS, II (General Dynamics Corp.) USA 52310-07. "Notes on the Approximations to the Statistical Distributions"

Hideo TODA (Electrotechnical Laboratory),TatsuzQ SHIMIZU (Daini-Seikosha Co.) &

Juichiro TAKEUCHI (Keio University) Japan 52710-08. "Use of Exponential Distribution in Managerial Decisions in a Textile Mill"

P. K. MUKHERJEE (Calico Mills) India 531

MULTIVARIATE TECHNIQUES AND EXPERIMENTAL DESIGNS

10-09. "Application of Statistical Methods to Process Modeling"Shohei NAKAMURA & Yasukatsu ISHIDA (Nippon Kokan K.K.) Japan 535

10-10. "An Application of Multivariate Techniques to the Financial Analysis"Tadakazu OKUNO (Nat'l Inst, of Agricultural Sciences),Bundo YAMADA & Shiro KONDO (Japan Development Bank) Japan 539

10-11. "Power of F-Test in the Analysis of Variance of Fixed Effect Model"

Yoshio KONDO & Zenjiro ASAKI (Kyoto University) Japan 543

EXPERIMENTAL DESIGNS

10-12. "An Improvement on Chemical Assays with Orthogonal Layout"Shiro JOKO (Nissan Chemical Industries, Ltd.) Japan 547

10-13. "Analysis of Factorial Experiment Evaluated by Paired Comparisons"

Setsuo NAKAGAMI & Takashi FURUICHI (Tanabe Seiyaku Co.) Japan 551

10-14." The Use of Key Symbols "

Syogo YAMAMOTO (Nippon Denso Co.) Japan 555

SPECIAL TOPICS

10-15. "An Unified Approach to the Sampling Theory and Analysis of Variance "

Ryuichi KOBAYASHI & Fusao SATO (St. Paule's University) Japan 55910-16. "

Chebyshev Bounds for Risks and Error Probabilities in Some Classification Problems "

A. W. MARSHALL & Ingram OLKIN (Stanford University) USA 563

xn

SESSION

10-17."

New Correlation Techniques"

F. EGERMAYER (Prague Technical College) Czechoslovakia 567

10-18. "Statistical Evaluation Simplified"

Eugene W. ELLIS (Pratt & Whitney Aircraft Co.) USA 571

CASES (1)

10-19. "An Analysis on TOYOTA Knitting Machine"

Takayuki ISHIYAMA (Aisin Seiki Co.) Japan 575

10-20. "An Analysis of Automotive Radiators "

Masatake MIYAKAWA & Akihisa KAMO (Nippon Denso Co.) Japan 579

10-21."

Applications of Statistical Methods in Textile Industry"

P. GOPALAKRISHNAN (College of India) India 583

10-22. "Application of Tables of Orthogonal Arrays to Experimental Design"

Yu-in WU (Chinese Society for QC) Rep. of China 587

CASES (2)

10-23. "Analysis of Variation of Diesel Engines Perfermance by Multiple Regression

and Design of Experiments"

Seiji KUMAGAI (Mitsubishi Heavy Ind., Ltd.) Japan 591

10-24. "Application of Multiple Regression Analysis to the Nitration Process of Toluene to TNT "

Sinkichi AKIHISA & Toshiyuki KIMURA (Chugoku Kayaku, Ltd.) Japan 595

10-25. "Application of the Statistical Technique to the Stab Detonator's Sensitivity"Shinji YOSHITAKE (Chugoku Kayaku, Ltd.) Japan 599

10-26. "Application of Signal-Noise Ratio to Non-Destructive Testing"

Seiji KOIZUMI, Ryosuke OZAKI & Yukio TAMURA (Toyota Motor Co.) Japan 603

10-27."

Cause and Effect Diagram—CE Diagram—Tokusei-Yo-in Zu—Ishikawa Diagram"

Kaoru ISHIKAWA (University of Tokyo) Japan 607

10-28. " On the Effect of Analysis Model on the Estimates of Partial Regression Coefficients

in Multiple Regression Analysis"

Noriaki KANO (University of Tokyo) Japan 611

10-29. "A Combination of Factor Analytic Technique and Analysis of Variance "

Rintaro MURAMATSU (Waseda University) &

Haruo MIYAZAKI (Gunma Tech. Coll.) Japan 615

Session 11 SAMPLING TECHNIQUES

STATISTICAL METHODS IN SAMPLING INSPECTION

11-01. "Critical Analysis of Some Standardized Sampling Inspection Procedures"

J. HAVELKA & Agnes H. ZALUDOVA

(National Res. Inst, for Machine Design) Czechoslovakia 621

11-02. "Calculation of Probabilities for Sampling Inspection Plans"

P. K. BOSE & S. P. MUKHERJEE (Calcutta University) India 625

11-03. "Statistical Problems in Work Sampling"Hitoshi KUME (Seikei University) Japan 629

11-04."

Tolcrancing of O. C. Curves"

Abdul RAOUF (University of Windsor) Canada 633

11-05. "Some Theory of Acceptance Sampling by Variables Based on Three-Parameter

Gamma Distribution "

Kinji TAKAGI (Musashi Institute of Technology) Japan 637

XI

TECHNICAL SESSION

DESIGN OF PRACTICAL SAMPLING INSPECTION

11-06. "Actual State of Sampling Inspection in Japan"

Taro YAMAMOTO & Others

(Inspection Committee, JUSE & MIL Study Group, JSA) Japan 641

11-07. "Analysis on Dynamic Characteristics of Severity Control in MIL-STD-105D"

Takeshi KOYAMA & Others (MIL Study Group, JSA) Japan 64511-08. "Basic Policy and Scheme on Modified MIL-STD-105D"

Yoshitugu OHMAE, Ryunosuke SUGA & Others (MIL Study Group, JSA) Japan 64911-09. "Theoretical Basis of Modified MIL-STD-105D Sampling Scheme"

Tsuneo YOKOH & Others (MIL Study Group, JSA) Japan 653

11-10. "Some Method for Designing the Variables Sampling Plans"

Hideyasu KARASAWA & Morishige SAITO (Sony Corp.),Akira KOUDA (Science University of Tokyo) &Akira YAMAGUCHI (Silver Seiko Co.) Japan 657

11-11."

Sampling Inspection Scheme Based on Prior Distributions and Costs "

Kiyoshige SHIOZAWA & Hirotake KIMURA (Waseda Univ.) Japan 66111-12. "Variables Sampling Inspection Plan for Standard Deviation Using Chi-Square Distribution"

Kunio KAWAMURA & Masamichi KURIYAMA

(Takeda Chemical Industries, Ltd.) Japan 66511-13. "How to Design the Inspection Plan Considering Cost"

Yoshihisa KAMESAKA (Nippon Electric Co.) Japan 669

SAMPLING METHODS OF BULK MATERIALS, LIQUIDS AND GASES

11-14. "The Sampling of Bulk Materials-Liquids and Gases"

Charles A. BICKING (Carborundum Co.) USA 67311-15. "Industrial Applications of Statistical Methods"

B. N. SINGH (Indian Standards Institution) India 677

11-16. "Recent Development in Method of Sampling Iron Ores in Japan and Activities of Reseach

Committee's on Quality of Imported Ore "

Takuzo SATO (Fuji Iron & Steel Co.) Japan 681

11-17. "Activities of Research Committee on Quality of Imported Iron Ore on Establishing JIS &

ISO Sampling Method of Iron Ore and Report on Method of Determining the Nominal

Magnitude of Quality Variation for Various Kinds of Iron Ore"

Takuzo SATO (Fuji Iron & Steel Co.) Japan 685

11-18. "Basic Principles for Drafting the ISO Recommendation of Sampling Iron Ores

in ISO/TC 102 and Experimental Methods for Checking the Precision and

the Bias of Sampling Iron Ores "

Masaru SUZUKI (Sumitomo Metal Industries, Ltd.) Japan 687

11-19. "Report on the Modernized Mechanical Plant of Iron Ore Sampling and Sample

Preparation in Japan"

Hiroshi HIGAMI & Hidehiko NAKAYASHIKI (Yawata Iron & Steel Co.) Japan 691

11-20. "Inauguration and Activities of Research Committee on Quality of Imported Coking Coal"

Yoshizo SHIMADA (Yawata Iron & Steel Co.) Japan 695

11-21. "Experimental Report on Sampling Method of Imported Coal for Japanese Steel Industry"

Shigeo AOKI (Kawasaki Steel Corp.) Japan 69911-22. "Observations on Analytical Methods of Imported Coal for Japanese Steel Industry"

Takashi MIYAZU (Nippon Kokan K.K.) Japan 703

11-23. "Sampling Error on Taking Analysis Sample of Coal after the Last Stage of the

Reduction Process "

Kaoru ISHIKAWA & Toshimi FUJIMORI (Univ. of Tokyo) Japan 707

XN

SESSION

11-24."

On the Problems of Bulk Material Sampling"

Hitoshi KUME (Seikei Univ.) Japan 711

11-25. " Plans d'Echantillonnages Optimaux"

Radu THEODORESCU (Laval University) Canada 713

Session 12 QUALITY IN THE WORLD MARKET AND

INTERNATIONAL COOPERATION

EXPORT-IMPORT INSPECTION & QUALITY IN WORLD MARKET

12-01." Outline of the Japanese Inspection System of Goods for Export"

Hisashi KUSAKABE (Japan Inspection Co.) Japan 719

12-02."

Problems of Export Inspedtion"

Masahiro TANO (Japan Camera Inspection Inst.) Japan 723

12-03. " Role of Inspection Organization in Import Business"

Umetaro TAKAHASHI (Overseas Merchandise Inspection Co.) Japan 727

12-04. "Rdle de 1'Inspection G6nerale d'Etat de Roumanie dans le Domaine de l'Assurance

de la Qualite des Produits d'Exportation"

A. C. VERONEL & Trofin SIMEDREA Rumania 729

(Gen. State Inspection for QC of Export Commodities)

12-05. "Present Status of the International Standardization of Automobile Tires, and

the Activities of Japan and Bridgestone Tire Co., Ltd."

Rokuro HATTORI (Bridgestone Tire Co.) Japan 733

INTERNATIONAL COOPERATION

12-06. "The National Development of Industrial Applications of Quality Control"

Ellis R. OTT (Rutgers University) USA 73712-07. "Japan's Role in Quality Control Education and Training through the Channel of

Economic Cooperation"

Shin MIURA (Japanese Standards Assoc.) Japan 741

12-08. "

Quality Spirals for Developing Countries "

W. R. PABST, Jr. (Consultant) USA 745

12-09. "Information Retrieval for Quality Control and Related Fields

(SWIFT LASS and SWIFT SIR)"Charles M. BICKING, Jr. USA 749

12-10."

International Cooperation on Quality"

E. G. D. PATERSON (Consultant) USA 753

Session 13 ADAPTING QUALITY CONTROL TO

THE NATIONAL CULTURE

13-01."

Quality Control Training in Argentina "

E- J- GARCIA (Argentine Inst, for QC) Argentine 75913-02. "The History and Current State of Quality Control in Australia"

J- SHILKIN (Army Inspection Service) Australia 76313-03.

"

Ouality Control in Canada "

W- F- FOSKETT (Canadian Section of the ASQC) Canada *

XV

TECHNICAL SESSION

13-04."

Standardization and Industrial Quality Control in a Developing Country"

Emmanuel LARTEY (National Standards Board)13-05. "

Introducing Quality Control into Small and Medium Manufacturing Industries "

c- T- HUEY & Anthony S. C. WONG (Hong Kong Productivity Centex)13-06. " The History and Current State of Quality Control in Spain

"

J. Garcia del VALLE (Metalurgica de Santo Ana S. A.)13-07.

"The History and Current State of Quality Control in Thailand "

Charoen VASHRANGSI (Science, Ministry of Industry)

13-08. "Total Quality Control in the USSR"

A. DERBISHER (The All-Union Research Inst, for Standardization)

Ghana 767

Hong Kong 771

Spain 775

Thailand 779

USSR *

13-09. "

Quality Control—A ' Must' for Any Developing Country"

Maduwage G. de SILVA (Lever Brothers, Ltd.)

13-10. "The History and Recent State of Quality Control in West Germany"Helmar STRAUCH (Deutsche Gesellschaft fur Qualitat)

13-11. " The History and Current Status of Quality Control in Hungary"

George SZASZ (Hungarian Office for Standardization)

13-12. " The History and Current Status of Quality Control in Israel"

Miriam MULLER (Standards Institution of Israel)

13-13. "History and Current State of Quality Control in Republic of Korea"

J. W. CHO (Korea Productivity Center)

13-14." The Status of Mexican Industry in the Field of Statistical Quality Control"

A. GARCIA (ASQC, Mexico City Section)

13-15." Education and Training for Quality Control in Holland "

J. D. N. de FREMERY (EOQC)

13-16. "Historique et Stade Actual du Contrdle de Qualite en Republique Socialiste de

A. C. VERONEL&Trot'in SIMEDREA

(Gen. State Inspection for QC of Export Commodities)

13-17. " The History and Current State of Quality Control in South Africa"

R. F. J. TEICHMANN (South African Bureau of Standards)

Ceylon 783

German, F. R. 787

Hungary 791

Israel 795

Rep. of Korea *

Mexico 799

Netherlands 801

Roumanie "

Rumania 805

South Africa 809

13-18. "National Quality Control in the Republic of China"

S. C. KAO (Chinese Society for Quality Control)

13-19."

The History and Current State of Quality Control in Denmark "

C. A. KOFOED (Danfoss A/S)13-20. " National Quality Control and National Quality Mark System in the German

Democratic Republic"

Lutz-Peter WAGENFUHR (German Board for Measuring & Goods Testing) German, D.R. 821

13-21. "Problem of Total Quality Control of Drugs in Pakistan"

Rashid T. KHAN (Ferozsons Laboratories, Ltd.)

13-22." The History and Current State of Quality Control in the Philippines

"

J°se c- VALDES (Philippines Standards)

13-23."

Recent Trends in Quality Control in Turkish Industry"

Turkan E. KUMBARACI (Middle East Technical University)

13-24. "

Quality Control Activities in the United Arab Republic"

Ahmad GENEIDY (Egyptian Organization for Standardization)

13-25. "Progress of Quality Assurance in Britain"

Harry E. DREW (Ministry of Technology)

Rep. of China 813

Denmark 817

Pakistan

Philippines 825

Turkey 829

U. Arab R. 833

United Kingdom 837

13-26. "The Development and Current State of Quality Control in Czechoslovakia "

F. EGERMAYER (Czech. Tech. College),

J. KREPELA (Inst, for Information Theory & Automation) &

A. H. ZALUDOVA (National Res. Inst, for Machine Design)

13-27. "The History and Current State of Quality Control in India"

P. C. MAHALANOBIS (Indian Statistical Institute)

Czechoslovakia 841

India *

IW

TECHNICAL SESSION

13-28."The History and Current State of Quality Control in Iran

"

Torab MOFIDI (University of Tehran) Iran *

13-29."

The History and Current Position of Quality Control in Ireland "

John G. ROCHE (College of Commerce) Ireland 845

13-30. " 20 Years' Experience and Conclusion in Introducing QC in Japanese Industry"

Eizaburo E. NISHIBORI (Consultant) Japan 849

13-31."

History and Actual Conditions of Quality Control in Poland "

Zygmunt OSTROWSKI (National Board for QC and Measures) Poland *

13-32."

The Concept of Quality in the Relationship between Peoples and

in the Culture of the World "

Jose G. de ABREU (Abreu & Cia., Lda.) Portugal 853

13-33. "

Challenge to Quality in Switzerland "

Hugo von WARTBURG (Swiss Organization for Quality) Switzerland *

Session 14 FUTURE PROBLEMS IN QUALITY CONTROL

14-01. "The Future Aspects of Quality Control in Cybernetical Era"

Toshio KITAGAWA (Kyushu University) Japan 857

14-02."

Quality and Information "

Hideo FUKAI (Nippon Kayaku Co.) Japan 861

14-03. "Perspective of Quality Control"

C. E. FISHER (Bell Telephone Labo.) USA 865

14-04. "

Quality Computation"

Tsutau HANADA (Kyoto Sangyo Univ.) Japan 869

14-05. "The Present & Future of Computer Aided Electronic Circuit Analyses Techniques"

Joseph V. J. RAVENIS, II (General Dynamics) USA 873

* Not Available

xvn