international proficiency tests · 2019. 3. 5. · proficiency tests according to iso/iec 17043...
TRANSCRIPT
www.dir-kimw.de
+49 (0)2351 1064-801
Kunststoff-Institut für die mittelständische Wirtschaft NRW GmbH (K.I.M.W.) | Karolinenstraße 8 | 58507 Lüdenscheid | www.kunststoff-institut.de
Accredited provider of proficiency tests
according to ISO/IEC 17043
Products Thermoplastics Elastomers / TPE Adhesives, coatings and surfaces Composite materials and thermosets Foams Foils Pipes Nonwovens and fabrics
Procedures Manufacturing quality Basic physical quantities Mechanical methods Thermal analysis Surface properties Rheology / Viscometry Environmental simulation Instrumental analytics Electrical properties
International Proficiency tests
according to DIN | ISO | VDA | ASTM
Kunststoff-Institut für die mittelständische Wirtschaft NRW GmbH (K.I.M.W.) | Karolinenstraße 8 | 58507 Lüdenscheid | www.kunststoff-institut.de
About us
2/10
The German Institute for Interlaboratory Tests (Deutsches Institut für Ringversuche) is part of the Kunststoff-Institut Lüdenscheid. With us, you benefit from the unique combination of plastics expertise and more than 15 years of experience in the organisation of interlaboratory comparisons. Our accreditations and certifications underline our own quality standards.
Our quality standards Accreditation Certification Technical center
Our ways
Online portal Interactive catalogue
Simple and intuitive ordering processes
Reference samples
Purchase of validated sample material Convenient exchange of information
Our strong partners
Statistics on proficiency tests Data handling
Metrology Instrumental analytics
Proficiency assessments for your ISO/IEC 17025 accreditation
Make your assessed competence visible for customers
Improvement of your performance level
Early warning of potential measurement failure
Training of laboratory staff with the help of reference material
Compare the performance of laboratories with locations worldwide
Your success is our claim
Kunststoff-Institut für die mittelständische Wirtschaft NRW GmbH (K.I.M.W.) | Karolinenstraße 8 | 58507 Lüdenscheid | www.kunststoff-institut.de
Deutsches Institutfür Ringversuche
Our proficiency testing program
[a]: These proficiency assessments are within the scope of the accreditation according to ISO/IEC 17043:2010.
1 Manufacturing quality Page 4
2 Basic physical quantities Page 4
3 Mechanical methods Page 4
4 Thermal analysis Page 6
5 Surface properties Page 6
6 Rheology / Viscometry Page 7
7 Environmental simulation Page 7
8 Instrumental analytics Seite 8
9 Electrical properties Page 9
Different aspects of the proficiency testing scheme may be subcontracted in part. In the case of subcontracting, this will be done to a competent subcontractor.
3/10
Our online catalogue:
https://dir-kimw.de/en/online-catalogue/proficiency-tests/
Kunststoff-Institut für die mittelständische Wirtschaft NRW GmbH (K.I.M.W.) | Karolinenstraße 8 | 58507 Lüdenscheid | www.kunststoff-institut.de
Deutsches Institutfür Ringversuche
1001 Without reference to standard Benchmarking: production of test specimens (FDM) Material ABS M30 (will be provided) | System: Stratasys 225 EUR
1002 Without reference to standard Benchmarking: production of test specimens (FDM) Material ABS (will be provided) | System: Open Source 225 EUR
1003 Without reference to standard Benchmarking: production of test specimens (FDM) Material PLA (will be provided) | System: Open Source 225 EUR
1004 Without reference to standard Benchmarking: production of test specimens by stereolithography (SLA) | Material Somos PerFORM 225 EUR
1005 Without reference to standard Benchmarking: production of test specimens (AKF) Material: ABS | System: Arburg Freeformer 225 EUR
1101 ISO 3167:2014-08 Typ A1; ISO20753:2008-03 Benchmarking: Injection moulding of test specimens 420 EUR
2001 Without reference to standard Specimen measurement with a caliper 280 EUR
2002 Without reference to standard Test specimen measurement with a micrometer gauge 280 EUR
2003DIN EN ISO 1101:2017-09; DIN EN ISO 5459:2013-05; DIN EN ISO 8015:2011-09
Tactile, automated sample measurement 470 EUR
2004 ISO 4287:1997-04; ISO 4288:1996-08 Roughness measurement by means of stylus method 280 EUR
2005 ISO 1101:2017-02; 5459:2011-08;8015:2011-06 Video-Optical Coordinate Determination 2D 470 EUR
2006 ISO 1101:2017-02; 5459:2011-08;8015:2011-06 Coordinate determination in strip light method 470 EUR
2007 ISO 1101:2017-02; 5459:2011-08;8015:2011-06 Coordinate determination with laser scanners 470 EUR
2008 ISO 1101:2017-02; 5459:2011-08;8015:2011-06 Coordinate determination by computer tomography 470 EUR
2009 Without reference to standard Determination of cavities by computer tomography 280 EUR
2010 ISO 4287:1997-04 Roughness (line), contactless 280 EUR
2011 ISO 25178-2:2012-04 Roughness (area), contactless 280 EUR
2101 ISO 1183-1:2012-05 Density [a] 280 EUR
2102 ASTM D792:2013 Density 280 EUR
2103 Without reference to standard Glasfiber length distribution 375 EUR
2201 ISO 2781:2018-06 Density (elastomers) 280 EUR
2501 ISO 845:2006-12 Gross density Klimate 23/50 or 20/65 280 EUR
2601 ISO 4593:1993-11 Film thickness - Drying method F 280 EUR
2701 Without reference to standard Wall thickness measurement on tubes 280 EUR
2801 ISO 5077:2007-02; ISO 6330:2012-04 Dimensional change after washing 280 EUR
2802 ISO 9073-2:1995-03 Thickness measurement of nonwovens 20 kPa 280 EUR
2803 ISO 9863-1:2016-07 Thickness under specified pressures 280 EUR
2804 ASTM D5199:2012 Determination of nominal thickness 280 EUR
2805 ASTM D5994:2010 Core thickness 280 EUR
2806 ASTM D7466:2010 Unevenness (Asperity Height) 280 EUR
2807 ISO 3801:1977-09; DIN EN12127:1997-12 Area-related mass of polyester and viscose material 280 EUR
3001 LV 112-1:2014-04 Single-core copper cable: Load application to the insulation 280 EUR
3002 VW 60306-1:2018-09 Single-core copper cables: impact test at low temperature (- 15°C) 280 EUR
3101 ISO 868:2003-03 Indentation hardness; Shore-D hardness [a] 280 EUR
3102 ISO 2039-1:2001-12 Ball indentation hardness 280 EUR
3103 ISO 527-2:2012-02 Tensile properties Test range ≤ 5 kN [a] 370 EUR
3104 ISO 527-2:2012-02 Tensile properties at high temperature Test range ≤ 5 kN; climatic chamber (80 ±2)°C 370 EUR
3105 ISO 527-2:2012-02 Tensile properties at low temperature Test range ≤ 10 kN; climatic chamber (-30 ±2)°C 370 EUR
3106 ISO 527-2:2012-02 Tensile properties of polyamides Test range ≤ 10 kN; dry as moulded [a] 420 EUR
3107 ASTM D638:2014 Tensile properties Test range ≤ 5 kN 370 EUR
3108 ISO 178:2010-12 Flexural properties Test range ≤ 5 kN [a] 370 EUR
4/10
1: Manufacturing qulity | 2: Basic physical quantities | 3: Mechanical methods
Kunststoff-Institut für die mittelständische Wirtschaft NRW GmbH (K.I.M.W.) | Karolinenstraße 8 | 58507 Lüdenscheid | www.kunststoff-institut.de
Deutsches Institutfür Ringversuche
3109 ISO 178:2010-12 Flexural properties of polyamides Test range ≤ 5 kN; dry as moulded [a] 420 EUR
3110 ASTM D790:2017 Flexural properties Test range ≤ 5 kN 370 EUR
3111 DIN 53435:2018-09 Dynstat; bending stress at 3.5% elongation 280 EUR
3112 ISO 604: 2002-03 Compressive properties Test range ≤ 5 kN 325 EUR
3113 ISO 6603-2:2000-10 Instrumented puncture test Recommendation: Total mass of impact body = 20 kg 445 EUR
3114 ISO 179-1:2010-06 Charpy impact strength; unnotched specimens (1eU - acU) Possible pendulums: e. g. (0,5-5) J [a] 280 EUR
3115 ISO 179-1:2010-06 Charpy impact strength; notched specimens (1eU - acN) Possible pendulums: e. g. (0,5-5) J [a] 280 EUR
3116 ISO 179-1:2010-06Charpy impact strength at sub-zero temperatures; unnotched and notched test specimens (acU | acN); pendulum e. g. 0,5-5 J; climatic chamber (-30 ±2)°C
280 EUR
3117 ISO 179-1:2010-06Charpy impact strength Polyamide; dry as moulded unnotched and notched test specimens (acU | acN); Possible pendulums e. g. 0,5-5 J [a]
330 EUR
3118 DIN 53435:2018-09 Dynstat impact strength; unnotched and notched test specimens Pendulum e. g. 1-11 J 280 EUR
3119 ISO 180:2000-12 Izod impact strength; unnotched and notched test specimens (aIU | aIN) 280 EUR
3120 ISO 6721-5:1996-05 Dynamic mechanical properties (DMA) 475 EUR
3121 ISO 899-1:2017-09 Creep rupture tensile test 370 EUR
3122 ISO 6603-1:2000 Non-instrumented impact testing 625 EUR
3201 ISO 868:2003-03 Indentation hardness; Shore-A hardness [a] 280 EUR
3202 ASTM D2240:2015 Indentation hardness; Shore-A hardness 280 EUR
3203 DIN ISO 48:2016-09 IRHD hardness (Method M) 280 EUR
3204 ISO 48-1:2018-08 IRHD hardness (Method N) 280 EUR
3205 ISO 37:2017-11 Tensile properties (sample S2) Test range ≤ 1 kN [a] 420 EUR
3206 ISO 37:2017-11 Tensile properties (sample S3A) Test range ≤ 1 kN 370 EUR
3207 ASTM D412:2016 Tensile properties Test range ≤ 1 kN 370 EUR
3208 ISO 34-1:2015-06 Tear resistance - strip test Test range ≤ 1 kN 280 EUR
3209 ISO 34-1:2015-06 Tear resistance - angle specimen with notch Test range ≤ 1 kN 280 EUR
3210 ISO 34-1:2015-06 Tear resistance - angle specimen - unnotched 280 EUR
3211 ISO 815-1:2014-09 Compression set 280 EUR
3212 ISO 815-2:2014-11 Compression set (low temperature) 280 EUR
3213 ISO 2285:2013-01 Tensile set 280 EUR
3301 ISO 4578:1997-07 Roll peeling process for high-strength adhesive bonds 625 EUR
3302 ISO 4587:2003-03 Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies 625 EUR
3401 ISO 527-5:2009-07 Composites - tensile properties (unidirectional laminates) 825 EUR
3402 ISO 14129:1997-12 Composites - shear properties determined in tensile test (±45° laminates) 825 EUR
3403 ISO 14125:1998-03 Composites - flexural properties 825 EUR
3404 ISO 14126:1999-09 Composites - compressive properties Method 2: common fixtures (CLC, etc.) 825 EUR
3405 EN ISO 14130:1997 Composites - apparent interlaminar shear strength (ILSS) 825 EUR
3406 ISO 527-4:1997 Composites - tensile properties (Isotropic and anisotropic) 825 EUR
3407 ASTM D 7078/D 7078M:2012 Composites - shear properties V Notched Rail Shear Method (Iosipescu) 825 EUR
3408 ISO 13003:2003-12; ASTMD3479/D3479M-12
Composites - Determination of fatigue properties under cyclic loading conditions (Tension - tension loading) 1250 EUR
3501 ISO 3386-1:1986-06; DBL 5452 Compression hardness at 40 % deformation Test range ≤ 5 kN 280 EUR
3502 ISO 1798:2008-02 Tensile properties (foams) Test range ≤ 1 kN 325 EUR
3503 ISO 1856:2018-06 Compression set 280 EUR
3601 ISO 527-3:1995-08 Tensile properties (foils) Test range ≤ 1 kN 370 EUR
3602 ISO 11339:2010-02 T peeling test; average peeling force Test range ≤ 1 kN 280 EUR
5/10
3: Mechanical methods
Kunststoff-Institut für die mittelständische Wirtschaft NRW GmbH (K.I.M.W.) | Karolinenstraße 8 | 58507 Lüdenscheid | www.kunststoff-institut.de
Deutsches Institutfür Ringversuche
3603 ISO 6383-1:2015-12 Tearing process; tear resistance Test range ≤ 1 kN 280 EUR
3604 ISO 6383-2:1983-09 Tear resistance - Elmendorf method 280 EUR
3605 DIN 55529:2012-09 Sealing seam strength 280 EUR
3701 ISO 9969:2016-01 Ring stiffness 280 EUR
3702 ISO 17454:2006-02 Adhesion Multilayer composite pipes 280 EUR
3703 ISO 1167-1/-2:2006-02 Resistance to internal overpressure 280 EUR
3801 ISO 527-3:1995-08 Tensile properties (nonwovens / fabrics) Test range ≤ 1 kN 410 EUR
3802 ASTM D6693:2004 Tensile properties (PE/PP Geomembranes) Test range ≤ 1 kN 410 EUR
3803 ASTM D1004:2013 Tear resistance Test range ≤ 1 kN 280 EUR
3804 ISO 13934-1:2013-04 Strip tensile test 280 EUR
3805 ISO 13934-2:2014-01 Grab pull test 280 EUR
3806 ISO 13937-1:2000-04 Determination of tear force using ballistic pendulum method (Elmendorf) 280 EUR
3807 ISO 13937-2:2000:04 Determination of tear force of trouser-shaped test specimens (single tear method) 280 EUR
3808 ISO 13937-3:2000-04 Determination of tear force of wing shaped test specimens 280 EUR
3809 ISO 13936-1/-2:2004-04 Determination of the slippage resistance of yarns at a seam in woven fabrics 280 EUR
3810 ISO 12236:2006-09 Stamp penetration test (CBR test) 280 EUR
3811 ASTM D4833:2007 Stamp penetration test 280 EUR
3812 ISO 13938-2:1999-08 Bursting properties of fabrics -bursting strength and bursting distension 280 EUR
3813 ISO 811:2018-03 Determination of resistance of textile fabrics to water penetration; hydrostatic pressure test 280 EUR
4101 ISO 11357-3:2018-03 DSC analysis; melting temperature / enthalpy [a] 280 EUR
4102 ISO 11357-2:2013-05 DSC analysis; glass transition temperature 1 [a] 280 EUR
4103 ISO 11357-6:2018-03 DSC analysis; oxidation induction time 280 EUR
4104 ISO 11357-7:2015-08 DSC analysis; crystallization kinetics 280 EUR
4105 ASTM D3418:2015 DSC analysis; glass transition temperature 280 EUR
4106 ASTM D3418:2015 DSC analysis; melting temperature / enthalpy 280 EUR
4107 ASTM D3895:2014 DSC analysis; oxidation induction time 280 EUR
4108 ISO 306:2013-11 Vicat softening temperature [a] 280 EUR
4109 ASTM D1525:2017 Vicat softening temperature 280 EUR
4110 DIN EN ISO 75-1:2013-08 Heat deflection temperature (HDT) [a] 280 EUR
4111 ASTM D648:2018 Heat deflection temperature (HDT) 280 EUR
4112 ISO 11359-1/-2:2014-01/1999-10 Thermomechanical Analysis (TMA) 325 EUR
4113 ISO 22007-4:2017-06 Thermal conductivity - laser flash method 325 EUR
4114 ISO 22007-2:2015-08 Thermal conductivity - Hot Disc method 325 EUR
4201 ISO 11357-2:2013-05 DSC analysis - glass transition temperature [a] 320 EUR
4801 ISO 11357-3:2018-03 DSC analysis; melting temperature, enthalpy (textiles) [a] 320 EUR
5001 DIN 55660-2:2011-12 Surface energy - Measurement of the contact angle 325 EUR
5201 ISO 4649:2017-09 Abrasion resistance (rotating cylinder drum) 280 EUR
5301 DIN 53236A:2018-02 / ISO7724:1984 Color measurement (8°/d); (ΔE*) ΔL* Δa* Δb* [a] 280 EUR
5302 DIN 53236B:2018-02 Color measurement (45°/0) - (ΔE*) ΔL* Δa* Δb* [a] 280 EUR
5303 ISO 2813:2014-10 Gloss level; gloss value (60°) [a] 280 EUR
5304 PV 3987:2016-11 Abrasion resistance of high gloss surfaces [a] 320 EUR
5305 ISO 2409:2013-02 Cross cut test 280 EUR
5306 PV 3952:2015-11 Scratch resistance [a] 320 EUR
5307 ISO 1518-1:2011-06 Scratch resistance 280 EUR
5308 PV 3974:2010-11 Plastic interior components - Determination of the Mar Resistance of Precision-Molded Grained Surfaces in the Vehicle Interior 280 EUR
5309 GS 97034-1:2015-09 Abrasion test (Instrument panel) 425 EUR
6/10
3: Mechanical methods | 4: Thermal analysis | 5: Surface properties
Kunststoff-Institut für die mittelständische Wirtschaft NRW GmbH (K.I.M.W.) | Karolinenstraße 8 | 58507 Lüdenscheid | www.kunststoff-institut.de
Deutsches Institutfür Ringversuche
5310 VW 50195:2002-11 Colorimetric evaluation of effect varnishes 280 EUR
5601 ISO 14782:1999-08 Transparency/Haze; Haze value 280 EUR
5602 ISO 8295:1995-10 Coefficient of friction 325 EUR
5801 Without reference to standard Colour measurement (8°/d); (ΔE*) ΔL* Δa* Δb* (Textiles) 280 EUR
5802 Ganz method white degree measurement 280 EUR
5803 ISO 12947-2:2016-12 Abrasion resistance Martindale 280 EUR
5804 ISO 12945-1:2000-12 Pill inclination (pilling test box) 280 EUR
5805 ISO 12945-2:2000-07 Pill inclination Martindale 280 EUR
5806 ISO 9073-12:2002-11 Absorbability of textiles 280 EUR
5807 ISO 9237:1995-06 Air permeability (method 2: peracetic acid bleach) 280 EUR
5808 ISO 15797:2017-12 Industrial washing with subsequent color measurement 280 EUR
6101 ISO 1133-1:2011-12 Melt mass flow rate (MFR) - volume flow rate (MVR) [a] 280 EUR
6102 ASTM D1238:2013 Melt mass flow rate (MFR) - volume flow rate (MVR) 280 EUR
6103 ISO 307:2007-05 Solution viscosity (conc. sulfuric acid) 280 EUR
6104 ISO 307:2007-05 Solution viscosity (m-cresol) 280 EUR
6105 ISO 307:2007-05 Solution viscosity (formic acid) 280 EUR
6106 ISO 1628-5:1998-03 Solution viscosity (phenol/1,2-dichlorobenzene) 350 EUR
6107 ISO 11443:2014-04 Flowability capillary rheometer 370 EUR
6108 ISO 6721-10:2015-09 Complex shear viscosity Parallel plate oscillation rheometer 370 EUR
6201 ISO 289-1:2015-09 Mooney viscosity 320 EUR
7001 LV 122-1:2015-05 Ageing of twisted wires 320 EUR
7002 LV 212-1:2015-01 Sheathed cables for motor vehicles 320 EUR
7003 ISO 6722:2010-11 Flame retardancy 280 EUR
7101 ISO 105-B06:1998-11; VDA 75202 Light fastness - colour fastness and ageing against artificial light athigh temperatures (Xenon arc lamp) 425 EUR
7102 DIN 75220:1992-11 Ageing in solar simulation systems (D-IN1-T) 425 EUR
7103 DIN 75220:1992-11 Ageing in sun simulation systems (Z-OUT) 1 cycle 425 EUR
7104 ISO 4892-2:2013-03 Lightfastness - Irradiation or weathering in devices (Xenon arc lamp) 1-Cycle 425 EUR
7105 ASTM G155:2013 Exposure of non-metallic materials (Xenon arc lamp) 425 EUR
7106 DIN 75200:1980-09; FMVSS302:2017-10 Flammability and burning behaviour (thermoplastics) [a] 280 EUR
7107 UL 94 (HB):2013-03-28 Burning behaviour UL 94 (HB) 280 EUR
7108 UL 94 (VB):2013-03-28 Burning behaviour UL 94 (VB) 280 EUR
7109 DIN EN 60695-2-13:2015-01 Fire hazard - glow wire test (GWIT) 370 EUR
7110 EN 14995:2006 Characterisation of compostability 375 EUR
7111 ASTM D 6400:2012 Label - Aerobically Composted in Municipal or Industrial Facilities 375 EUR
7112 PV 1306:2008-02 Exposure Test for Determining the Tackiness of Polypropylene Parts 550 EUR
7301 ISO 9227:2017-03 Corrosion test | Salt spray test (NSS) 550 EUR
7302 ISO 20567-1:2017-01 Multistep impact test (ISO) 775 EUR
7303 DBL 5416; ISO 16925-B:2014-02 Steam jet test 775 EUR
7304 DBL 7381.30 Aluminium corrosion (Filiform & CASS) 775 EUR
7305 ISO 11997-1:2017 Corrosion test | Determination of resistance to cyclic corrosion conditions 550 EUR
7306 DBL 5416 Multistep impact test (DBL) 775 EUR
7501 DBL 5307; FMVSS 302 Flammability and burning behaviour (foams) 280 EUR
7601 ISO 15106-3:2003-01 Water vapour permeability 410 EUR
7602 ISO 15105-2:2003-02 Oxygen permeability 410 EUR
7801 ISO 105-B02:2014-09 Light fastness (Xenon arc lamp) 425 EUR
7802 ISO 105-B04:1994-11 Light fastness (Xenon arc lamp) 425 EUR
7803 FMVSS 302 Flammability and burning behaviour (textiles) [a] 280 EUR
7804 DBL 5307; FMVSS 302 Flammability and burning behaviour (leather) 410 EUR
7/10
5: Surface properties | 6: Rheology / Viscometry | 7: Environmental simulation
Kunststoff-Institut für die mittelständische Wirtschaft NRW GmbH (K.I.M.W.) | Karolinenstraße 8 | 58507 Lüdenscheid | www.kunststoff-institut.de
Deutsches Institutfür Ringversuche
7805 DIN EN 14576:2005-07 Environmental stress cracking 425 EUR
7806 ASTM D5397:2007 Stress crack resistance 425 EUR
7807 ISO 105-C06/C2S:2010-03 Fastness to washing at 60 °C 425 EUR
7808 ISO 105-C08:2010-03 Fastness to washing 425 EUR
7809 ISO 105-D01:2010-05 Fastness to dry cleaning 425 EUR
7810 ISO 105-E01:2013-03 Fastness to water 425 EUR
7811 ISO 105-E04:2013-03 Fastness to perspiration 425 EUR
7812 ISO 105-X12:2016-06 Colour fastness to rubbing (Crockmeter) 425 EUR
8101 Without reference to standard FTIR spectroscopy - Identification of plastic granules 280 EUR
8102 ISO 1172:1996-12 Ash content [a] 280 EUR
8103 ISO 11358-1:2014-07 Thermogravimetric analysis (TGA); filler content [a] 280 EUR
8104 Without reference to standard Quantitative Infrared Spectroscopy (FTIR) [a] 325 EUR
8105 ISO 15512:2016-10 Water content (Aquatrac®); CaH2 method [a] 280 EUR
8106 ISO 15512:2016-10 Water content (Karl-Fischer) 280 EUR
8107 ISO 62:2008-02 Water absorption 375 EUR
8108 VDA 270:2016-11 / PV 3900:2000-08 Emission behaviour: Odour test [a] 290 EUR
8109 PV 3925; VDA 275 Emission behaviour: formaldehyde emission 325 EUR
8110 PV 3341:1995-03; VDA 277:1995-01 Emission behaviour: emission of organic compounds (total carbonemissions) 325 EUR
8111 VDA 278:2011-10 Emission behaviour: Thermal desorption analysis 375 EUR
8112 Without reference to standard Stabilizer content in polyolefins According to REACH Regulation (EC) No. 1907/2006 (SVHC List) 280 EUR
8113 Without reference to standard Phthalate content in plastics for children's articles in accordance with REACH Regulation (EC) No. 1907/2006 Annex XVII 280 EUR
8114 Without reference to standard Phthalate content in plastics in accordance with REACH Regulation (EC) No. 1907/2006 Annex XVII 280 EUR
8115 Without reference to standard Cadmium According to REACH Regulation (EC) No. 1907/2006 (SVHC List) 280 EUR
8116 Without reference to standard Nonylphenol in accordance with Regulation (EU) No. 10/2011 Annex II 280 EUR
8117 Without reference to standard Metal release (specific migration) in accordance with Regulation (EU) No. 10/2011 Annex II 280 EUR
8118 Without reference to standard Primary aromatic amines (specific migration) according to RoHS (RL 2011/65/EU) 280 EUR
8119 Without reference to standard Total content of lead, cadmium, mercury and chromium 280 EUR
8120 Without reference to standard Content of Chrome VI in accordance with Packaging Ordinance (Directive 94/62/EC) 280 EUR
8121 Without reference to standard Content of lead, cadmium, mercury, chromium VI in plastics in accordance with Packaging Ordinance (RL 94/62/EC) 280 EUR
8122 DIN 55672-1:2016-03 Determination of mean molecular masses by GPC Solvent THF 470 EUR
8123 Without reference to standard Determination of mean molecular masses by GPC Solvent HFIP " Solvent 470 EUR
8124 Without reference to standard Determination of mean molecular masses by GPC Derivatization with trifluoroacetic acid 470 EUR
8125 Without reference to standard Determination of a relative degradation of material by GPC 470 EUR
8126 Without reference to standard Determination of mixture ratios using GPC 470 EUR
8201 ISO 11358-1:2014-07 Thermogravimetric analysis (TGA); soot content [a] 320 EUR
8202 AfPS GS 2014:01 PAK Polycyclic aromatic hydrocarbons (PAHs) 280 EUR
8203 ISO 1407:2011-12 Extractable components 280 EUR
8204 ISO 1817:2015-02 Mass increase (test liquid B) 280 EUR
8601 Without reference to standard Identification of films (multilayer) 325 EUR
8602 Without reference to standard Identification of films (monofoil) 280 EUR
8603 DIN 75201:2011-11 Method B Emission behaviour: Fogging B [a] 325 EUR
8604 DIN 75201:2011-11 Method A Emission behaviour: Fogging A 280 EUR
8/10
7: Environmental simulation | 8: Instrumental analytics
Kunststoff-Institut für die mittelständische Wirtschaft NRW GmbH (K.I.M.W.) | Karolinenstraße 8 | 58507 Lüdenscheid | www.kunststoff-institut.de
Deutsches Institutfür Ringversuche
8801 ISO 11358-1:2014-07 Thermogravimetric analysis (TGA); soot content [a] 280 EUR
8802 ASTM D4218:2015 Black carbon content of Geosynthetics 280 EUR
8803 ASTM D5596:2003 Determination of soot dispersion 280 EUR
8804 Without reference to standard Formaldehyde in textiles in accordance with REACH Regulation (EC) No. 1907/2006 Annex XVII. 280 EUR
8805 Without reference to standard Azo dyes in textiles 280 EUR
8806 Without reference to standard Flame retardants in textiles 280 EUR
8807 ISO 3071:2005-06 pH-value of textiles 280 EUR
9101 DIN EN 60112:2010-05 Comparative tracking index (CTI ) 370 EUR
9102 IEC 62631-3-2:2015 Surface resistance 370 EUR
9103 IEC 62631-3-1:2016 Volume resistance 370 EUR
9/10
8: Instrumental analytics | 9: Electrical properties
Kunststoff-Institut für die mittelständische Wirtschaft NRW GmbH (K.I.M.W.) | Karolinenstraße 8 | 58507 Lüdenscheid | www.kunststoff-institut.de
Deutsches Institutfür Ringversuche
Customer data / reservation
Click on the envelope to send us the PDF by email and reserve your
participation. Afterwards, we will provide a non-binding offer. You do not incur
any liabilities by sending your inquiry
Customer data
Dr. Andreas Balster Phone: +49 (0) 23 51.10 64-801
Contact persons
shut
ters
tock
/Ayk
ut E
rdog
duiS
tock
/Ser
gey
Trya
pits
yn,
Dav
eAla
n,
Larisa
Boz
hiko
va,
imag
esto
ck,
Phuc
hit
Aun
mua
ng,
kynn
y, B
emar
daSV,
D3D
amon
, N
icoE
lNin
o, s
kym
an8
Christian UeingPhone: +49 (0) 23 51.10 64-167
10/10
Company
Additional line
Name
Street
Postal code
City
Country
Phone number
More than 3
4% discountQuantity discount -Participation and reference samples
�
More than 7
8% discount
More than 14
10% discount
Discount
Participation in the proficiency tests is subject to a quantity discount
The reference samples are also subject to a quantity discount�
Version: EN-20190403