intrinsic engineering portfolio ipp issue_rev2
TRANSCRIPT
Intrinsic Engineering Portfolio
INTRINSIC ENGINEERING CC PORTFOLIOINTRINSIC ENGINEERING is company that specializes in Substation Automation and IndustrialNetworking solutions. We have over 15 years’ experience in the Electrical Supply Industryranging from engineering, commissioning and training. Our key competencies in the area ofIndependent Power Producers (IPPs) range from design, procurement, panel wiring, acceptancetest procedures, installation and commissioning of the SCADA System. We undertake all thetechnical interfaces to Eskom to ensure all your SA Grid Code SCADA requirements are met tofacilitate Grid Code Acceptance.
Projects undertaken and customers interfaced with concerning IPPs include the following.
KLIPHEUWEL WINDFARM
Location Caledon Western CapeCapacity 27MWWTG 9x Sinovel 3MW WTGsEPC Iberdrola Engineering & Construction (Spain)Main Client Biotherm Energy SASubcontract Subcontractor to Powertech SACompletion Date January 2014
Design of the SCADA panel with CAD drawings.
Procurement of the hardware and creating detail Bill of Materials (BoM).
Writing acceptance test procedures for factory and site SCADA system testing.
Configuration of the main SCADA gateway device, GE D400 Substation Gateway.
Overseeing installation and termination of the SCADA Panel with the site cabling contractor.
Site commissioning with GE protection IEDs, Campbell SA meteorological IEDs and
RuggedCom switches and routers.
Regulation interface commissioning with Sinovel WTG SCADA master over Modbus TCP.
Configuration and commissioning of SMS gateway interface for SMS alarm notification.
Creating all one-line diagrams on D400 HMI for local operator control and supervision.
Establishing communications to Eskom Bellville Control via the Eskom GE D20 RTU over a
DNP3 communications link.
Create Eskom signal exchange database and commission to Eskom Bellville Control Centre.
Page 2 of 5
NOBLESFONTEIN WINDFARM
Location Outside 3 Sisters in the Northern CapeCapacity 73.8MWWTG 41x Vestas 1.8MW WTGsEPC Iberdrola Engineering & Construction (Spain)Main Client Gestamp Renewables (Spain)Subcontract Subcontractor to Powertech SACompletion Date June 2014
Design of the SCADA panel with CAD drawings.
Procurement of the hardware and creating detail Bill of Materials (BoM).
Writing acceptance test procedures for factory and site SCADA system testing.
Configuration of the main SCADA gateway device, GE D400 Substation Gateway.
Overseeing installation and termination of the SCADA Panel with the site cabling contractor.
Site commissioning with GE protection IEDs, Obelisk SA meteorological IEDs and
RuggedCom switches and Cisco router.
Regulation interface commissioning with Vestas (Denmark) WTG SCADA master over DNP
TCP.
Configuration and commissioning of SMS gateway interface for SMS alarm notification.
Creating all one-line diagrams on D400 HMI for local operator control and supervision.
Establishing communications to Eskom Bloemfontein Control via a Metacom VSAT
interface.
Create Eskom signal exchange database and commission to Eskom Bloemfontein Control
Centre over a DNP3 communications ink.
Create signal database and commission plant to remote Gestamp IEC104 master based in
Spain.
JASPER SOLAR FARM
Location Outside Postmasburg in the Northern CapeCapacity 75MW AC/95.98 MW DCCells Photo VoltaicEPC Iberdrola Engineering & Construction (Spain)Main Client Solar ReserveSubcontract Subcontractor to Ingeteam SACompletion Date August 2014
Training Ingeteam engineer on GE D20 RTU operation.
Configuration of the main SCADA gateway device, GE D20 Substation Gateway.
Site commissioning of protection and regulation signals with Ingeteam SA.
Establishing communications to Eskom Bloemfontein Control via a UHF radio network.
Page 3 of 5
Create Eskom signal exchange database and commission to Eskom Bloemfontein Control
Centre.
KAKAMAS HYDRO ELECTRIC PLANT – KHEP
Location Outside Kakamas in the Northern CapeCapacity 10MWTurbines 3x 4MW Kaplan Turbines from HPP FranceEPC Hydro Tasmania SAMain Client KHEP ConsortiumSubcontract Subcontractor to Adenco Construction SA and Hydro Tasmania SACompletion Date December 2014
Design of the SCADA panel with CAD drawings.
Procurement of the hardware and creating detail Bill of Materials (BoM).
Writing acceptance test procedures for factory and site SCADA system testing.
Configuration of the main SCADA gateway device, GE D400 Substation Gateway.
Overseeing installation and termination of the SCADA Panel with the site cabling contractor.
Site commissioning with SEL & ABB protection IEDs and RuggedCom switches.
Regulation interface commissioning with HPP Turbine SCADA system via a Prosoft DNP
Gateway.
Configuration of Prosoft DNP Gateway.
Establishing communications to Eskom Bellville Control via a Metacom GPRS interface.
Create Eskom signal exchange database and commission to Eskom Bellville Control Centre
over a DNP3 communications link.
Commissioning the Klipheuwel WindFarm SCADA System outside Caledon in the Western Cape.
Page 4 of 5
The Noblesfontein WindFarm and Substation outside 3 Sisters in the Northern Cape.
The Jasper Solar Farm outside Postmasburg in the Northern Cape.
Page 5 of 5
The KHEP Plant outside Kakamas in the Northern Cape.
CUSTOMERSEskom Enterprises, Transmission and Distribution Divisions; Powertech System Integrators;H3ISquared; Ekurhuleni Municipality, Polokwane Municipality, Tshwane Municipality, IDCTechnologies, Ingeteam Power Technology SA and Iberdrola Engineering and Construction,Adenco Construction, CVG Consulting, Hydro Tasmania SA.
Please contact Alan Simon on the details below for further information.
Cell: 082 903 5115Email: [email protected]
Unit 158Carlswald Creek9th RoadCrowthorneMidrandJohannesburg